ssb: Fix extraction of values from SPROM
This fixes extraction of some values from the SPROM. It mainly fixes extraction of antenna related values, which is needed for another b43 fix sent later. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Michael Buesch
David S. Miller
parent
66c6b139f7
commit
e861b98d5e
|
|
@ -3884,16 +3884,6 @@ static void b43_sprom_fixup(struct ssb_bus *bus)
|
|||
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
|
||||
bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
|
||||
bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
|
||||
|
||||
/* Handle case when gain is not set in sprom */
|
||||
if (bus->sprom.antenna_gain_a == 0xFF)
|
||||
bus->sprom.antenna_gain_a = 2;
|
||||
if (bus->sprom.antenna_gain_bg == 0xFF)
|
||||
bus->sprom.antenna_gain_bg = 2;
|
||||
|
||||
/* Convert Antennagain values to Q5.2 */
|
||||
bus->sprom.antenna_gain_a <<= 2;
|
||||
bus->sprom.antenna_gain_bg <<= 2;
|
||||
}
|
||||
|
||||
static void b43_wireless_exit(struct ssb_device *dev, struct b43_wl *wl)
|
||||
|
|
|
|||
|
|
@ -3572,11 +3572,6 @@ static void b43legacy_sprom_fixup(struct ssb_bus *bus)
|
|||
bus->boardinfo.type == 0x4E &&
|
||||
bus->boardinfo.rev > 0x40)
|
||||
bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
|
||||
|
||||
/* Convert Antennagain values to Q5.2 */
|
||||
if (bus->sprom.antenna_gain_bg == 0xFF)
|
||||
bus->sprom.antenna_gain_bg = 2; /* if unset, use 2 dBm */
|
||||
bus->sprom.antenna_gain_bg <<= 2;
|
||||
}
|
||||
|
||||
static void b43legacy_wireless_exit(struct ssb_device *dev,
|
||||
|
|
|
|||
|
|
@ -1859,7 +1859,7 @@ void b43legacy_phy_xmitpower(struct b43legacy_wldev *dev)
|
|||
* which accounts for the factor of 4 */
|
||||
#define REG_MAX_PWR 20
|
||||
max_pwr = min(REG_MAX_PWR * 4
|
||||
- dev->dev->bus->sprom.antenna_gain_bg
|
||||
- dev->dev->bus->sprom.antenna_gain.ghz24.a0
|
||||
- 0x6, max_pwr);
|
||||
|
||||
/* find the desired power in Q5.2 - power_level is in dBm
|
||||
|
|
|
|||
|
|
@ -247,7 +247,7 @@ static void sprom_do_read(struct ssb_bus *bus, u16 *sprom)
|
|||
int i;
|
||||
|
||||
for (i = 0; i < bus->sprom_size; i++)
|
||||
sprom[i] = readw(bus->mmio + SSB_SPROM_BASE + (i * 2));
|
||||
sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2));
|
||||
}
|
||||
|
||||
static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom)
|
||||
|
|
@ -297,10 +297,32 @@ err_ctlreg:
|
|||
return err;
|
||||
}
|
||||
|
||||
static s8 r123_extract_antgain(u8 sprom_revision, const u16 *in,
|
||||
u16 mask, u16 shift)
|
||||
{
|
||||
u16 v;
|
||||
u8 gain;
|
||||
|
||||
v = in[SPOFF(SSB_SPROM1_AGAIN)];
|
||||
gain = (v & mask) >> shift;
|
||||
if (gain == 0xFF)
|
||||
gain = 2; /* If unset use 2dBm */
|
||||
if (sprom_revision == 1) {
|
||||
/* Convert to Q5.2 */
|
||||
gain <<= 2;
|
||||
} else {
|
||||
/* Q5.2 Fractional part is stored in 0xC0 */
|
||||
gain = ((gain & 0xC0) >> 6) | ((gain & 0x3F) << 2);
|
||||
}
|
||||
|
||||
return (s8)gain;
|
||||
}
|
||||
|
||||
static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
|
||||
{
|
||||
int i;
|
||||
u16 v;
|
||||
s8 gain;
|
||||
u16 loc[3];
|
||||
|
||||
if (out->revision == 3) { /* rev 3 moved MAC */
|
||||
|
|
@ -327,8 +349,15 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
|
|||
SPEX(et0phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0A, 0);
|
||||
SPEX(et1phyaddr, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1A,
|
||||
SSB_SPROM1_ETHPHY_ET1A_SHIFT);
|
||||
SPEX(et0mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET0M, 14);
|
||||
SPEX(et1mdcport, SSB_SPROM1_ETHPHY, SSB_SPROM1_ETHPHY_ET1M, 15);
|
||||
SPEX(board_rev, SSB_SPROM1_BINF, SSB_SPROM1_BINF_BREV, 0);
|
||||
SPEX(country_code, SSB_SPROM1_BINF, SSB_SPROM1_BINF_CCODE,
|
||||
SSB_SPROM1_BINF_CCODE_SHIFT);
|
||||
SPEX(ant_available_a, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTA,
|
||||
SSB_SPROM1_BINF_ANTA_SHIFT);
|
||||
SPEX(ant_available_bg, SSB_SPROM1_BINF, SSB_SPROM1_BINF_ANTBG,
|
||||
SSB_SPROM1_BINF_ANTBG_SHIFT);
|
||||
SPEX(pa0b0, SSB_SPROM1_PA0B0, 0xFFFF, 0);
|
||||
SPEX(pa0b1, SSB_SPROM1_PA0B1, 0xFFFF, 0);
|
||||
SPEX(pa0b2, SSB_SPROM1_PA0B2, 0xFFFF, 0);
|
||||
|
|
@ -348,9 +377,22 @@ static void sprom_extract_r123(struct ssb_sprom *out, const u16 *in)
|
|||
SSB_SPROM1_ITSSI_A_SHIFT);
|
||||
SPEX(itssi_bg, SSB_SPROM1_ITSSI, SSB_SPROM1_ITSSI_BG, 0);
|
||||
SPEX(boardflags_lo, SSB_SPROM1_BFLLO, 0xFFFF, 0);
|
||||
SPEX(antenna_gain_a, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_A, 0);
|
||||
SPEX(antenna_gain_bg, SSB_SPROM1_AGAIN, SSB_SPROM1_AGAIN_BG,
|
||||
SSB_SPROM1_AGAIN_BG_SHIFT);
|
||||
|
||||
/* Extract the antenna gain values. */
|
||||
gain = r123_extract_antgain(out->revision, in,
|
||||
SSB_SPROM1_AGAIN_BG,
|
||||
SSB_SPROM1_AGAIN_BG_SHIFT);
|
||||
out->antenna_gain.ghz24.a0 = gain;
|
||||
out->antenna_gain.ghz24.a1 = gain;
|
||||
out->antenna_gain.ghz24.a2 = gain;
|
||||
out->antenna_gain.ghz24.a3 = gain;
|
||||
gain = r123_extract_antgain(out->revision, in,
|
||||
SSB_SPROM1_AGAIN_A,
|
||||
SSB_SPROM1_AGAIN_A_SHIFT);
|
||||
out->antenna_gain.ghz5.a0 = gain;
|
||||
out->antenna_gain.ghz5.a1 = gain;
|
||||
out->antenna_gain.ghz5.a2 = gain;
|
||||
out->antenna_gain.ghz5.a3 = gain;
|
||||
}
|
||||
|
||||
static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in)
|
||||
|
|
@ -376,9 +418,10 @@ static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in)
|
|||
SSB_SPROM4_ETHPHY_ET1A_SHIFT);
|
||||
SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0);
|
||||
SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0);
|
||||
SPEX(antenna_gain_a, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_0, 0);
|
||||
SPEX(antenna_gain_bg, SSB_SPROM4_AGAIN, SSB_SPROM4_AGAIN_1,
|
||||
SSB_SPROM4_AGAIN_1_SHIFT);
|
||||
SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A,
|
||||
SSB_SPROM4_ANTAVAIL_A_SHIFT);
|
||||
SPEX(ant_available_bg, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_BG,
|
||||
SSB_SPROM4_ANTAVAIL_BG_SHIFT);
|
||||
SPEX(maxpwr_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_MAXP_BG_MASK, 0);
|
||||
SPEX(itssi_bg, SSB_SPROM4_MAXP_BG, SSB_SPROM4_ITSSI_BG,
|
||||
SSB_SPROM4_ITSSI_BG_SHIFT);
|
||||
|
|
@ -391,6 +434,19 @@ static void sprom_extract_r4(struct ssb_sprom *out, const u16 *in)
|
|||
SPEX(gpio2, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P2, 0);
|
||||
SPEX(gpio3, SSB_SPROM4_GPIOB, SSB_SPROM4_GPIOB_P3,
|
||||
SSB_SPROM4_GPIOB_P3_SHIFT);
|
||||
|
||||
/* Extract the antenna gain values. */
|
||||
SPEX(antenna_gain.ghz24.a0, SSB_SPROM4_AGAIN01,
|
||||
SSB_SPROM4_AGAIN0, SSB_SPROM4_AGAIN0_SHIFT);
|
||||
SPEX(antenna_gain.ghz24.a1, SSB_SPROM4_AGAIN01,
|
||||
SSB_SPROM4_AGAIN1, SSB_SPROM4_AGAIN1_SHIFT);
|
||||
SPEX(antenna_gain.ghz24.a2, SSB_SPROM4_AGAIN23,
|
||||
SSB_SPROM4_AGAIN2, SSB_SPROM4_AGAIN2_SHIFT);
|
||||
SPEX(antenna_gain.ghz24.a3, SSB_SPROM4_AGAIN23,
|
||||
SSB_SPROM4_AGAIN3, SSB_SPROM4_AGAIN3_SHIFT);
|
||||
memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24,
|
||||
sizeof(out->antenna_gain.ghz5));
|
||||
|
||||
/* TODO - get remaining rev 4 stuff needed */
|
||||
}
|
||||
|
||||
|
|
@ -400,7 +456,7 @@ static int sprom_extract(struct ssb_bus *bus, struct ssb_sprom *out,
|
|||
memset(out, 0, sizeof(*out));
|
||||
|
||||
out->revision = in[size - 1] & 0x00FF;
|
||||
ssb_printk(KERN_INFO PFX "SPROM revision %d detected.\n", out->revision);
|
||||
ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision);
|
||||
if ((bus->chip_id & 0xFF00) == 0x4400) {
|
||||
/* Workaround: The BCM44XX chip has a stupid revision
|
||||
* number stored in the SPROM.
|
||||
|
|
@ -445,9 +501,7 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus,
|
|||
err = sprom_check_crc(buf, bus->sprom_size);
|
||||
if (err) {
|
||||
/* check for rev 4 sprom - has special signature */
|
||||
if (buf [32] == 0x5372) {
|
||||
ssb_printk(KERN_WARNING PFX "Extracting a rev 4"
|
||||
" SPROM\n");
|
||||
if (buf[32] == 0x5372) {
|
||||
kfree(buf);
|
||||
buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16),
|
||||
GFP_KERNEL);
|
||||
|
|
|
|||
|
|
@ -22,7 +22,12 @@ struct ssb_sprom {
|
|||
u8 et1mac[6]; /* MAC address for 802.11a */
|
||||
u8 et0phyaddr; /* MII address for enet0 */
|
||||
u8 et1phyaddr; /* MII address for enet1 */
|
||||
u8 et0mdcport; /* MDIO for enet0 */
|
||||
u8 et1mdcport; /* MDIO for enet1 */
|
||||
u8 board_rev; /* Board revision number from SPROM. */
|
||||
u8 country_code; /* Country Code */
|
||||
u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */
|
||||
u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */
|
||||
u16 pa0b0;
|
||||
u16 pa0b1;
|
||||
u16 pa0b2;
|
||||
|
|
@ -38,8 +43,18 @@ struct ssb_sprom {
|
|||
u8 itssi_a; /* Idle TSSI Target for A-PHY */
|
||||
u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */
|
||||
u16 boardflags_lo; /* Boardflags (low 16 bits) */
|
||||
u8 antenna_gain_a; /* A-PHY Antenna gain (in dBm Q5.2) */
|
||||
u8 antenna_gain_bg; /* B/G-PHY Antenna gain (in dBm Q5.2) */
|
||||
|
||||
/* Antenna gain values for up to 4 antennas
|
||||
* on each band. Values in dBm/4 (Q5.2). Negative gain means the
|
||||
* loss in the connectors is bigger than the gain. */
|
||||
struct {
|
||||
struct {
|
||||
s8 a0, a1, a2, a3;
|
||||
} ghz24; /* 2.4GHz band */
|
||||
struct {
|
||||
s8 a0, a1, a2, a3;
|
||||
} ghz5; /* 5GHz band */
|
||||
} antenna_gain;
|
||||
|
||||
/* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */
|
||||
};
|
||||
|
|
|
|||
|
|
@ -193,10 +193,10 @@
|
|||
#define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */
|
||||
#define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */
|
||||
#define SSB_SPROM1_BINF_CCODE_SHIFT 8
|
||||
#define SSB_SPROM1_BINF_ANTA 0x3000 /* Available A-PHY antennas */
|
||||
#define SSB_SPROM1_BINF_ANTA_SHIFT 12
|
||||
#define SSB_SPROM1_BINF_ANTBG 0xC000 /* Available B-PHY antennas */
|
||||
#define SSB_SPROM1_BINF_ANTBG_SHIFT 14
|
||||
#define SSB_SPROM1_BINF_ANTBG 0x3000 /* Available B-PHY and G-PHY antennas */
|
||||
#define SSB_SPROM1_BINF_ANTBG_SHIFT 12
|
||||
#define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */
|
||||
#define SSB_SPROM1_BINF_ANTA_SHIFT 14
|
||||
#define SSB_SPROM1_PA0B0 0x105E
|
||||
#define SSB_SPROM1_PA0B1 0x1060
|
||||
#define SSB_SPROM1_PA0B2 0x1062
|
||||
|
|
@ -221,9 +221,10 @@
|
|||
#define SSB_SPROM1_ITSSI_A_SHIFT 8
|
||||
#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */
|
||||
#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */
|
||||
#define SSB_SPROM1_AGAIN_A 0x00FF /* A-PHY */
|
||||
#define SSB_SPROM1_AGAIN_BG 0xFF00 /* B-PHY and G-PHY */
|
||||
#define SSB_SPROM1_AGAIN_BG_SHIFT 8
|
||||
#define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */
|
||||
#define SSB_SPROM1_AGAIN_BG_SHIFT 0
|
||||
#define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */
|
||||
#define SSB_SPROM1_AGAIN_A_SHIFT 8
|
||||
|
||||
/* SPROM Revision 2 (inherits from rev 1) */
|
||||
#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */
|
||||
|
|
@ -264,7 +265,7 @@
|
|||
#define SSB_SPROM3_CCKPO_11M_SHIFT 12
|
||||
#define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */
|
||||
|
||||
/* SPROM Revision 4 entries with ?? in comment are unknown */
|
||||
/* SPROM Revision 4 */
|
||||
#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */
|
||||
#define SSB_SPROM4_ET0MAC 0x1018 /* 6 bytes MAC address for Ethernet ?? */
|
||||
#define SSB_SPROM4_ET1MAC 0x1018 /* 6 bytes MAC address for 802.11a ?? */
|
||||
|
|
@ -275,13 +276,22 @@
|
|||
#define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */
|
||||
#define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */
|
||||
#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */
|
||||
#define SSB_SPROM4_ANT_A 0x105D /* A Antennas */
|
||||
#define SSB_SPROM4_ANT_BG 0x105C /* B/G Antennas */
|
||||
#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */
|
||||
#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */
|
||||
#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0
|
||||
#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */
|
||||
#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8
|
||||
#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */
|
||||
#define SSB_SPROM4_AGAIN 0x105E /* Antenna Gain (in dBm Q5.2) */
|
||||
#define SSB_SPROM4_AGAIN_0 0x00FF /* Antenna 0 */
|
||||
#define SSB_SPROM4_AGAIN_1 0xFF00 /* Antenna 1 */
|
||||
#define SSB_SPROM4_AGAIN_1_SHIFT 8
|
||||
#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */
|
||||
#define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */
|
||||
#define SSB_SPROM4_AGAIN0_SHIFT 0
|
||||
#define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */
|
||||
#define SSB_SPROM4_AGAIN1_SHIFT 8
|
||||
#define SSB_SPROM4_AGAIN23 0x1060
|
||||
#define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */
|
||||
#define SSB_SPROM4_AGAIN2_SHIFT 0
|
||||
#define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */
|
||||
#define SSB_SPROM4_AGAIN3_SHIFT 8
|
||||
#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */
|
||||
#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */
|
||||
#define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */
|
||||
|
|
|
|||
Loading…
Reference in New Issue