i2c: at91: use BIT() macro to define register bits
This patch just fixes typo before applying later patches which will use register bits with index above 16. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This commit is contained in:
parent
93563a6a71
commit
e84cf8f03f
|
@ -41,29 +41,30 @@
|
||||||
|
|
||||||
/* AT91 TWI register definitions */
|
/* AT91 TWI register definitions */
|
||||||
#define AT91_TWI_CR 0x0000 /* Control Register */
|
#define AT91_TWI_CR 0x0000 /* Control Register */
|
||||||
#define AT91_TWI_START 0x0001 /* Send a Start Condition */
|
#define AT91_TWI_START BIT(0) /* Send a Start Condition */
|
||||||
#define AT91_TWI_STOP 0x0002 /* Send a Stop Condition */
|
#define AT91_TWI_STOP BIT(1) /* Send a Stop Condition */
|
||||||
#define AT91_TWI_MSEN 0x0004 /* Master Transfer Enable */
|
#define AT91_TWI_MSEN BIT(2) /* Master Transfer Enable */
|
||||||
#define AT91_TWI_SVDIS 0x0020 /* Slave Transfer Disable */
|
#define AT91_TWI_MSDIS BIT(3) /* Master Transfer Disable */
|
||||||
#define AT91_TWI_QUICK 0x0040 /* SMBus quick command */
|
#define AT91_TWI_SVEN BIT(4) /* Slave Transfer Enable */
|
||||||
#define AT91_TWI_SWRST 0x0080 /* Software Reset */
|
#define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
|
||||||
|
#define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
|
||||||
|
#define AT91_TWI_SWRST BIT(7) /* Software Reset */
|
||||||
|
|
||||||
#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
|
#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
|
||||||
#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
|
#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
|
||||||
#define AT91_TWI_MREAD 0x1000 /* Master Read Direction */
|
#define AT91_TWI_MREAD BIT(12) /* Master Read Direction */
|
||||||
|
|
||||||
#define AT91_TWI_IADR 0x000c /* Internal Address Register */
|
#define AT91_TWI_IADR 0x000c /* Internal Address Register */
|
||||||
|
|
||||||
#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
|
#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
|
||||||
|
|
||||||
#define AT91_TWI_SR 0x0020 /* Status Register */
|
#define AT91_TWI_SR 0x0020 /* Status Register */
|
||||||
#define AT91_TWI_TXCOMP 0x0001 /* Transmission Complete */
|
#define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */
|
||||||
#define AT91_TWI_RXRDY 0x0002 /* Receive Holding Register Ready */
|
#define AT91_TWI_RXRDY BIT(1) /* Receive Holding Register Ready */
|
||||||
#define AT91_TWI_TXRDY 0x0004 /* Transmit Holding Register Ready */
|
#define AT91_TWI_TXRDY BIT(2) /* Transmit Holding Register Ready */
|
||||||
|
#define AT91_TWI_OVRE BIT(6) /* Overrun Error */
|
||||||
#define AT91_TWI_OVRE 0x0040 /* Overrun Error */
|
#define AT91_TWI_UNRE BIT(7) /* Underrun Error */
|
||||||
#define AT91_TWI_UNRE 0x0080 /* Underrun Error */
|
#define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
|
||||||
#define AT91_TWI_NACK 0x0100 /* Not Acknowledged */
|
|
||||||
|
|
||||||
#define AT91_TWI_INT_MASK \
|
#define AT91_TWI_INT_MASK \
|
||||||
(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
|
(AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
|
||||||
|
|
Loading…
Reference in New Issue