media: cx25840: add pin to pad mapping and output format configuration

This commit adds pin to pad mapping and output format configuration support
in CX2584x-series chips to cx25840 driver.

This functionality is then used to allow disabling ivtv-specific hacks and
configuration values (called a "generic mode"), so cx25840 driver can be
used for other devices not needing them without risking compatibility
problems.

Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>

drivers/media/i2c/cx25840/cx25840-core.c

@@ -21,6 +21,9 @@
  * CX23888 DIF support for the HVR1850
  * Copyright (C) 2011 Steven Toth <stoth@kernellabs.com>
  *
+ * CX2584x pin to pad mapping and output format configuration support are
+ * Copyright (C) 2011 Maciej S. Szmigiero <mail@maciej.szmigiero.name>
+ *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version 2
@@ -316,6 +319,217 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
 	return 0;
 }
 
+static u8 cx25840_function_to_pad(struct i2c_client *client, u8 function)
+{
+	if (function > CX25840_PAD_VRESET) {
+		v4l_err(client, "invalid function %u, assuming default\n",
+			(unsigned int)function);
+		return 0;
+	}
+
+	return function;
+}
+
+static void cx25840_set_invert(u8 *pinctrl3, u8 *voutctrl4, u8 function,
+			       u8 pin, bool invert)
+{
+	switch (function) {
+	case CX25840_PAD_IRQ_N:
+		if (invert)
+			*pinctrl3 &= ~2;
+		else
+			*pinctrl3 |= 2;
+		break;
+
+	case CX25840_PAD_ACTIVE:
+		if (invert)
+			*voutctrl4 |= BIT(2);
+		else
+			*voutctrl4 &= ~BIT(2);
+		break;
+
+	case CX25840_PAD_VACTIVE:
+		if (invert)
+			*voutctrl4 |= BIT(5);
+		else
+			*voutctrl4 &= ~BIT(5);
+		break;
+
+	case CX25840_PAD_CBFLAG:
+		if (invert)
+			*voutctrl4 |= BIT(4);
+		else
+			*voutctrl4 &= ~BIT(4);
+		break;
+
+	case CX25840_PAD_VRESET:
+		if (invert)
+			*voutctrl4 |= BIT(0);
+		else
+			*voutctrl4 &= ~BIT(0);
+		break;
+	}
+
+	if (function != CX25840_PAD_DEFAULT)
+		return;
+
+	switch (pin) {
+	case CX25840_PIN_DVALID_PRGM0:
+		if (invert)
+			*voutctrl4 |= BIT(6);
+		else
+			*voutctrl4 &= ~BIT(6);
+		break;
+
+	case CX25840_PIN_HRESET_PRGM2:
+		if (invert)
+			*voutctrl4 |= BIT(1);
+		else
+			*voutctrl4 &= ~BIT(1);
+		break;
+	}
+}
+
+static int cx25840_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
+				   struct v4l2_subdev_io_pin_config *p)
+{
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	unsigned int i;
+	u8 pinctrl[6], pinconf[10], voutctrl4;
+
+	for (i = 0; i < 6; i++)
+		pinctrl[i] = cx25840_read(client, 0x114 + i);
+
+	for (i = 0; i < 10; i++)
+		pinconf[i] = cx25840_read(client, 0x11c + i);
+
+	voutctrl4 = cx25840_read(client, 0x407);
+
+	for (i = 0; i < n; i++) {
+		u8 strength = p[i].strength;
+
+		if (strength != CX25840_PIN_DRIVE_SLOW &&
+		    strength != CX25840_PIN_DRIVE_MEDIUM &&
+		    strength != CX25840_PIN_DRIVE_FAST) {
+
+			v4l_err(client,
+				"invalid drive speed for pin %u (%u), assuming fast\n",
+				(unsigned int)p[i].pin,
+				(unsigned int)strength);
+
+			strength = CX25840_PIN_DRIVE_FAST;
+		}
+
+		switch (p[i].pin) {
+		case CX25840_PIN_DVALID_PRGM0:
+			if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
+				pinctrl[0] &= ~BIT(6);
+			else
+				pinctrl[0] |= BIT(6);
+
+			pinconf[3] &= 0xf0;
+			pinconf[3] |= cx25840_function_to_pad(client,
+							      p[i].function);
+
+			cx25840_set_invert(&pinctrl[3], &voutctrl4,
+					   p[i].function,
+					   CX25840_PIN_DVALID_PRGM0,
+					   p[i].flags &
+					   BIT(V4L2_SUBDEV_IO_PIN_ACTIVE_LOW));
+
+			pinctrl[4] &= ~(3 << 2); /* CX25840_PIN_DRIVE_MEDIUM */
+			switch (strength) {
+			case CX25840_PIN_DRIVE_SLOW:
+				pinctrl[4] |= 1 << 2;
+				break;
+
+			case CX25840_PIN_DRIVE_FAST:
+				pinctrl[4] |= 2 << 2;
+				break;
+			}
+
+			break;
+
+		case CX25840_PIN_HRESET_PRGM2:
+			if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
+				pinctrl[1] &= ~BIT(0);
+			else
+				pinctrl[1] |= BIT(0);
+
+			pinconf[4] &= 0xf0;
+			pinconf[4] |= cx25840_function_to_pad(client,
+							      p[i].function);
+
+			cx25840_set_invert(&pinctrl[3], &voutctrl4,
+					   p[i].function,
+					   CX25840_PIN_HRESET_PRGM2,
+					   p[i].flags &
+					   BIT(V4L2_SUBDEV_IO_PIN_ACTIVE_LOW));
+
+			pinctrl[4] &= ~(3 << 2); /* CX25840_PIN_DRIVE_MEDIUM */
+			switch (strength) {
+			case CX25840_PIN_DRIVE_SLOW:
+				pinctrl[4] |= 1 << 2;
+				break;
+
+			case CX25840_PIN_DRIVE_FAST:
+				pinctrl[4] |= 2 << 2;
+				break;
+			}
+
+			break;
+
+		case CX25840_PIN_PLL_CLK_PRGM7:
+			if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
+				pinctrl[2] &= ~BIT(2);
+			else
+				pinctrl[2] |= BIT(2);
+
+			switch (p[i].function) {
+			case CX25840_PAD_XTI_X5_DLL:
+				pinconf[6] = 0;
+				break;
+
+			case CX25840_PAD_AUX_PLL:
+				pinconf[6] = 1;
+				break;
+
+			case CX25840_PAD_VID_PLL:
+				pinconf[6] = 5;
+				break;
+
+			case CX25840_PAD_XTI:
+				pinconf[6] = 2;
+				break;
+
+			default:
+				pinconf[6] = 3;
+				pinconf[6] |=
+					cx25840_function_to_pad(client,
+								p[i].function)
+					<< 4;
+			}
+
+			break;
+
+		default:
+			v4l_err(client, "invalid or unsupported pin %u\n",
+				(unsigned int)p[i].pin);
+			break;
+		}
+	}
+
+	cx25840_write(client, 0x407, voutctrl4);
+
+	for (i = 0; i < 6; i++)
+		cx25840_write(client, 0x114 + i, pinctrl[i]);
+
+	for (i = 0; i < 10; i++)
+		cx25840_write(client, 0x11c + i, pinconf[i]);
+
+	return 0;
+}
+
 static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
 				      struct v4l2_subdev_io_pin_config *pincfg)
 {
@@ -323,6 +537,8 @@ static int common_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
 
 	if (is_cx2388x(state))
 		return cx23885_s_io_pin_config(sd, n, pincfg);
+	else if (is_cx2584x(state))
+		return cx25840_s_io_pin_config(sd, n, pincfg);
 	return 0;
 }
 
@@ -389,6 +605,91 @@ static void cx25840_work_handler(struct work_struct *work)
 	wake_up(&state->fw_wait);
 }
 
+#define CX25840_VCONFIG_SET_BIT(state, opt_msk, voc, idx, bit, oneval)	\
+	do {								\
+		if ((state)->vid_config & (opt_msk)) {			\
+			if (((state)->vid_config & (opt_msk)) ==	\
+			    (oneval))					\
+				(voc)[idx] |= BIT(bit);		\
+			else						\
+				(voc)[idx] &= ~BIT(bit);		\
+		}							\
+	} while (0)
+
+/* apply current vconfig to hardware regs */
+static void cx25840_vconfig_apply(struct i2c_client *client)
+{
+	struct cx25840_state *state = to_state(i2c_get_clientdata(client));
+	u8 voutctrl[3];
+	unsigned int i;
+
+	for (i = 0; i < 3; i++)
+		voutctrl[i] = cx25840_read(client, 0x404 + i);
+
+	if (state->vid_config & CX25840_VCONFIG_FMT_MASK)
+		voutctrl[0] &= ~3;
+	switch (state->vid_config & CX25840_VCONFIG_FMT_MASK) {
+	case CX25840_VCONFIG_FMT_BT656:
+		voutctrl[0] |= 1;
+		break;
+
+	case CX25840_VCONFIG_FMT_VIP11:
+		voutctrl[0] |= 2;
+		break;
+
+	case CX25840_VCONFIG_FMT_VIP2:
+		voutctrl[0] |= 3;
+		break;
+
+	case CX25840_VCONFIG_FMT_BT601:
+		/* zero */
+	default:
+		break;
+	}
+
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_RES_MASK, voutctrl,
+				0, 2, CX25840_VCONFIG_RES_10BIT);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_VBIRAW_MASK, voutctrl,
+				0, 3, CX25840_VCONFIG_VBIRAW_ENABLED);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_ANCDATA_MASK, voutctrl,
+				0, 4, CX25840_VCONFIG_ANCDATA_ENABLED);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_TASKBIT_MASK, voutctrl,
+				0, 5, CX25840_VCONFIG_TASKBIT_ONE);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_ACTIVE_MASK, voutctrl,
+				1, 2, CX25840_VCONFIG_ACTIVE_HORIZONTAL);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_VALID_MASK, voutctrl,
+				1, 3, CX25840_VCONFIG_VALID_ANDACTIVE);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_HRESETW_MASK, voutctrl,
+				1, 4, CX25840_VCONFIG_HRESETW_PIXCLK);
+
+	if (state->vid_config & CX25840_VCONFIG_CLKGATE_MASK)
+		voutctrl[1] &= ~(3 << 6);
+	switch (state->vid_config & CX25840_VCONFIG_CLKGATE_MASK) {
+	case CX25840_VCONFIG_CLKGATE_VALID:
+		voutctrl[1] |= 2;
+		break;
+
+	case CX25840_VCONFIG_CLKGATE_VALIDACTIVE:
+		voutctrl[1] |= 3;
+		break;
+
+	case CX25840_VCONFIG_CLKGATE_NONE:
+		/* zero */
+	default:
+		break;
+	}
+
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_DCMODE_MASK, voutctrl,
+				2, 0, CX25840_VCONFIG_DCMODE_BYTES);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_IDID0S_MASK, voutctrl,
+				2, 1, CX25840_VCONFIG_IDID0S_LINECNT);
+	CX25840_VCONFIG_SET_BIT(state, CX25840_VCONFIG_VIPCLAMP_MASK, voutctrl,
+				2, 4, CX25840_VCONFIG_VIPCLAMP_ENABLED);
+
+	for (i = 0; i < 3; i++)
+		cx25840_write(client, 0x404 + i, voutctrl[i]);
+}
+
 static void cx25840_initialize(struct i2c_client *client)
 {
 	DEFINE_WAIT(wait);
@@ -455,6 +756,9 @@ static void cx25840_initialize(struct i2c_client *client)
 	/* (re)set input */
 	set_input(client, state->vid_input, state->aud_input);
 
+	if (state->generic_mode)
+		cx25840_vconfig_apply(client);
+
 	/* start microcontroller */
 	cx25840_and_or(client, 0x803, ~0x10, 0x10);
 }
@@ -809,13 +1113,20 @@ void cx25840_std_setup(struct i2c_client *client)
 	else
 		cx25840_write(client, 0x49f, 0x14);
 
+	/* generic mode uses the values that the chip autoconfig would set */
 	if (std & V4L2_STD_625_50) {
 		hblank = 132;
 		hactive = 720;
 		burst = 93;
+		if (state->generic_mode) {
+			vblank = 34;
+			vactive = 576;
+			vblank656 = 38;
+		} else {
 			vblank = 36;
 			vactive = 580;
 			vblank656 = 40;
+		}
 		src_decimation = 0x21f;
 		luma_lpf = 2;
 
@@ -824,6 +1135,10 @@ void cx25840_std_setup(struct i2c_client *client)
 			comb = 0;
 			sc = 0x0a425f;
 		} else if (std == V4L2_STD_PAL_Nc) {
+			if (state->generic_mode) {
+				burst = 95;
+				luma_lpf = 1;
+			}
 			uv_lpf = 1;
 			comb = 0x20;
 			sc = 556453;
@@ -838,12 +1153,19 @@ void cx25840_std_setup(struct i2c_client *client)
 		vactive = 487;
 		luma_lpf = 1;
 		uv_lpf = 1;
+		if (state->generic_mode) {
+			vblank = 20;
+			vblank656 = 24;
+		}
 
 		src_decimation = 0x21f;
 		if (std == V4L2_STD_PAL_60) {
+			if (!state->generic_mode) {
 				vblank = 26;
 				vblank656 = 26;
 				burst = 0x5b;
+			} else
+				burst = 0x59;
 			luma_lpf = 2;
 			comb = 0x20;
 			sc = 688739;
@@ -854,8 +1176,10 @@ void cx25840_std_setup(struct i2c_client *client)
 			comb = 0x20;
 			sc = 555452;
 		} else {
+			if (!state->generic_mode) {
 				vblank = 26;
 				vblank656 = 26;
+			}
 			burst = 0x5b;
 			comb = 0x66;
 			sc = 556063;
@@ -1403,7 +1727,9 @@ static int cx25840_set_fmt(struct v4l2_subdev *sd,
 		Hsrc |= (cx25840_read(client, 0x471) & 0xf0) >> 4;
 	}
 
-	Vlines = fmt->height + (is_50Hz ? 4 : 7);
+	Vlines = fmt->height;
+	if (!state->generic_mode)
+		Vlines += is_50Hz ? 4 : 7;
 
 	/*
 	 * We keep 1 margin for the Vsrc < Vlines check since the
@@ -1647,8 +1973,71 @@ static void log_audio_status(struct i2c_client *client)
 	}
 }
 
+#define CX25840_VCONFIG_OPTION(state, cfg_in, opt_msk)			\
+	do {								\
+		if ((cfg_in) & (opt_msk)) {				\
+			(state)->vid_config &= ~(opt_msk);		\
+			(state)->vid_config |= (cfg_in) & (opt_msk);	\
+		}							\
+	} while (0)
+
+/* apply incoming options to the current vconfig */
+static void cx25840_vconfig_add(struct cx25840_state *state, u32 cfg_in)
+{
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_FMT_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_RES_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_VBIRAW_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_ANCDATA_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_TASKBIT_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_ACTIVE_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_VALID_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_HRESETW_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_CLKGATE_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_DCMODE_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_IDID0S_MASK);
+	CX25840_VCONFIG_OPTION(state, cfg_in, CX25840_VCONFIG_VIPCLAMP_MASK);
+}
+
 /* ----------------------------------------------------------------------- */
 
+/*
+ * Initializes the device in the generic mode.
+ * For cx2584x chips also adds additional video output settings provided
+ * in @val parameter (CX25840_VCONFIG_*).
+ *
+ * The generic mode disables some of the ivtv-related hacks in this driver.
+ * For cx2584x chips it also enables setting video output configuration while
+ * setting it according to datasheet defaults by default.
+ */
+static int cx25840_init(struct v4l2_subdev *sd, u32 val)
+{
+	struct cx25840_state *state = to_state(sd);
+
+	state->generic_mode = true;
+
+	if (is_cx2584x(state)) {
+		/* set datasheet video output defaults */
+		state->vid_config = CX25840_VCONFIG_FMT_BT656 |
+			CX25840_VCONFIG_RES_8BIT |
+			CX25840_VCONFIG_VBIRAW_DISABLED |
+			CX25840_VCONFIG_ANCDATA_ENABLED |
+			CX25840_VCONFIG_TASKBIT_ONE |
+			CX25840_VCONFIG_ACTIVE_HORIZONTAL |
+			CX25840_VCONFIG_VALID_NORMAL |
+			CX25840_VCONFIG_HRESETW_NORMAL |
+			CX25840_VCONFIG_CLKGATE_NONE |
+			CX25840_VCONFIG_DCMODE_DWORDS |
+			CX25840_VCONFIG_IDID0S_NORMAL |
+			CX25840_VCONFIG_VIPCLAMP_DISABLED;
+
+		/* add additional settings */
+		cx25840_vconfig_add(state, val);
+	} else /* TODO: generic mode needs to be developed for other chips */
+		WARN_ON(1);
+
+	return 0;
+}
+
 static int cx25840_reset(struct v4l2_subdev *sd, u32 val)
 {
 	struct cx25840_state *state = to_state(sd);
@@ -1860,6 +2249,11 @@ static int cx25840_s_video_routing(struct v4l2_subdev *sd,
 	if (is_cx23888(state))
 		cx23888_std_setup(client);
 
+	if (is_cx2584x(state) && state->generic_mode && config) {
+		cx25840_vconfig_add(state, config);
+		cx25840_vconfig_apply(client);
+	}
+
 	return set_input(client, input, state->aud_input);
 }
 
@@ -5067,6 +5461,8 @@ static const struct v4l2_ctrl_ops cx25840_ctrl_ops = {
 static const struct v4l2_subdev_core_ops cx25840_core_ops = {
 	.log_status = cx25840_log_status,
 	.reset = cx25840_reset,
+	/* calling the (optional) init op will turn on the generic mode */
+	.init = cx25840_init,
 	.load_fw = cx25840_load_fw,
 	.s_io_pin_config = common_s_io_pin_config,
 #ifdef CONFIG_VIDEO_ADV_DEBUG

drivers/media/i2c/cx25840/cx25840-core.h

@@ -53,10 +53,15 @@ enum cx25840_media_pads {
  * @mute:		audio mute V4L2 control (non-cx2583x devices only)
  * @pvr150_workaround:	whether we enable workaround for Hauppauge PVR150
  *			hardware bug (audio dropping out)
+ * @generic_mode:	whether we disable ivtv-specific hacks
+ *			this mode gets turned on when the bridge driver calls
+ *			cx25840 subdevice init core op
  * @radio:		set if we are currently in the radio mode, otherwise
  *			the current mode is non-radio (that is, video)
  * @std:		currently set video standard
  * @vid_input:		currently set video input
+ * @vid_config:	currently set video output configuration
+ *			only used in the generic mode
  * @aud_input:		currently set audio input
  * @audclk_freq:	currently set audio sample rate
  * @audmode:		currently set audio mode (when in non-radio mode)
@@ -83,9 +88,11 @@ struct cx25840_state {
 		struct v4l2_ctrl *mute;
 	};
 	int pvr150_workaround;
+	bool generic_mode;
 	int radio;
 	v4l2_std_id std;
 	enum cx25840_video_input vid_input;
+	u32 vid_config;
 	enum cx25840_audio_input aud_input;
 	u32 audclk_freq;
 	int audmode;
@@ -118,6 +125,14 @@ static inline bool is_cx2583x(struct cx25840_state *state)
 	       state->id == CX25837;
 }
 
+static inline bool is_cx2584x(struct cx25840_state *state)
+{
+	return state->id == CX25840 ||
+	       state->id == CX25841 ||
+	       state->id == CX25842 ||
+	       state->id == CX25843;
+}
+
 static inline bool is_cx231xx(struct cx25840_state *state)
 {
 	return state->id == CX2310X_AV;

drivers/media/i2c/cx25840/cx25840-vbi.c

@@ -95,6 +95,7 @@ int cx25840_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
 	memset(svbi->service_lines, 0, sizeof(svbi->service_lines));
 	svbi->service_set = 0;
 	/* we're done if raw VBI is active */
+	/* TODO: this will have to be changed for generic_mode VBI */
 	if ((cx25840_read(client, 0x404) & 0x10) == 0)
 		return 0;
 
@@ -137,6 +138,7 @@ int cx25840_s_raw_fmt(struct v4l2_subdev *sd, struct v4l2_vbi_format *fmt)
 		cx25840_write(client, 0x54f, vbi_offset);
 	else
 		cx25840_write(client, 0x47f, vbi_offset);
+	/* TODO: this will have to be changed for generic_mode VBI */
 	cx25840_write(client, 0x404, 0x2e);
 	return 0;
 }
@@ -157,6 +159,7 @@ int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
 	cx25840_std_setup(client);
 
 	/* Sliced VBI */
+	/* TODO: this will have to be changed for generic_mode VBI */
 	cx25840_write(client, 0x404, 0x32);	/* Ancillary data */
 	cx25840_write(client, 0x406, 0x13);
 	if (is_cx23888(state))
@@ -211,6 +214,7 @@ int cx25840_s_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *
 	}
 
 	cx25840_write(client, state->vbi_regs_offset + 0x43c, 0x16);
+	/* TODO: this will have to be changed for generic_mode VBI */
 	if (is_cx23888(state))
 		cx25840_write(client, 0x428, is_pal ? 0x2a : 0x22);
 	else

include/media/drv-intf/cx25840.h

@@ -82,6 +82,81 @@ enum cx25840_video_input {
 	CX25840_DIF_ON = 0x80000400,
 };
 
+/*
+ * The defines below are used to set the chip video output settings
+ * in the generic mode that can be enabled by calling the subdevice
+ * init core op.
+ *
+ * The requested settings can be passed to the init core op as
+ * @val parameter and to the s_routing video op as @config parameter.
+ *
+ * For details please refer to the section 3.7 Video Output Formatting and
+ * to Video Out Control 1 to 4 registers in the section 5.6 Video Decoder Core
+ * of the chip datasheet.
+ */
+#define CX25840_VCONFIG_FMT_SHIFT 0
+#define CX25840_VCONFIG_FMT_MASK GENMASK(2, 0)
+#define CX25840_VCONFIG_FMT_BT601 BIT(0)
+#define CX25840_VCONFIG_FMT_BT656 BIT(1)
+#define CX25840_VCONFIG_FMT_VIP11 GENMASK(1, 0)
+#define CX25840_VCONFIG_FMT_VIP2 BIT(2)
+
+#define CX25840_VCONFIG_RES_SHIFT 3
+#define CX25840_VCONFIG_RES_MASK GENMASK(4, 3)
+#define CX25840_VCONFIG_RES_8BIT BIT(3)
+#define CX25840_VCONFIG_RES_10BIT BIT(4)
+
+#define CX25840_VCONFIG_VBIRAW_SHIFT 5
+#define CX25840_VCONFIG_VBIRAW_MASK GENMASK(6, 5)
+#define CX25840_VCONFIG_VBIRAW_DISABLED BIT(5)
+#define CX25840_VCONFIG_VBIRAW_ENABLED BIT(6)
+
+#define CX25840_VCONFIG_ANCDATA_SHIFT 7
+#define CX25840_VCONFIG_ANCDATA_MASK GENMASK(8, 7)
+#define CX25840_VCONFIG_ANCDATA_DISABLED BIT(7)
+#define CX25840_VCONFIG_ANCDATA_ENABLED BIT(8)
+
+#define CX25840_VCONFIG_TASKBIT_SHIFT 9
+#define CX25840_VCONFIG_TASKBIT_MASK GENMASK(10, 9)
+#define CX25840_VCONFIG_TASKBIT_ZERO BIT(9)
+#define CX25840_VCONFIG_TASKBIT_ONE BIT(10)
+
+#define CX25840_VCONFIG_ACTIVE_SHIFT 11
+#define CX25840_VCONFIG_ACTIVE_MASK GENMASK(12, 11)
+#define CX25840_VCONFIG_ACTIVE_COMPOSITE BIT(11)
+#define CX25840_VCONFIG_ACTIVE_HORIZONTAL BIT(12)
+
+#define CX25840_VCONFIG_VALID_SHIFT 13
+#define CX25840_VCONFIG_VALID_MASK GENMASK(14, 13)
+#define CX25840_VCONFIG_VALID_NORMAL BIT(13)
+#define CX25840_VCONFIG_VALID_ANDACTIVE BIT(14)
+
+#define CX25840_VCONFIG_HRESETW_SHIFT 15
+#define CX25840_VCONFIG_HRESETW_MASK GENMASK(16, 15)
+#define CX25840_VCONFIG_HRESETW_NORMAL BIT(15)
+#define CX25840_VCONFIG_HRESETW_PIXCLK BIT(16)
+
+#define CX25840_VCONFIG_CLKGATE_SHIFT 17
+#define CX25840_VCONFIG_CLKGATE_MASK GENMASK(18, 17)
+#define CX25840_VCONFIG_CLKGATE_NONE BIT(17)
+#define CX25840_VCONFIG_CLKGATE_VALID BIT(18)
+#define CX25840_VCONFIG_CLKGATE_VALIDACTIVE GENMASK(18, 17)
+
+#define CX25840_VCONFIG_DCMODE_SHIFT 19
+#define CX25840_VCONFIG_DCMODE_MASK GENMASK(20, 19)
+#define CX25840_VCONFIG_DCMODE_DWORDS BIT(19)
+#define CX25840_VCONFIG_DCMODE_BYTES BIT(20)
+
+#define CX25840_VCONFIG_IDID0S_SHIFT 21
+#define CX25840_VCONFIG_IDID0S_MASK GENMASK(22, 21)
+#define CX25840_VCONFIG_IDID0S_NORMAL BIT(21)
+#define CX25840_VCONFIG_IDID0S_LINECNT BIT(22)
+
+#define CX25840_VCONFIG_VIPCLAMP_SHIFT 23
+#define CX25840_VCONFIG_VIPCLAMP_MASK GENMASK(24, 23)
+#define CX25840_VCONFIG_VIPCLAMP_ENABLED BIT(23)
+#define CX25840_VCONFIG_VIPCLAMP_DISABLED BIT(24)
+
 enum cx25840_audio_input {
 	/* Audio inputs: serial or In4-In8 */
 	CX25840_AUDIO_SERIAL,
@@ -109,7 +184,7 @@ enum cx25840_io_pin {
 };
 
 enum cx25840_io_pad {
-	/* Output pads */
+	/* Output pads, these must match the actual chip register values */
 	CX25840_PAD_DEFAULT = 0,
 	CX25840_PAD_ACTIVE,
 	CX25840_PAD_VACTIVE,