KVM: x86: Add support for user wait instructions

UMONITOR, UMWAIT and TPAUSE are a set of user wait instructions.
This patch adds support for user wait instructions in KVM. Availability
of the user wait instructions is indicated by the presence of the CPUID
feature flag WAITPKG CPUID.0x07.0x0:ECX[5]. User wait instructions may
be executed at any privilege level, and use 32bit IA32_UMWAIT_CONTROL MSR
to set the maximum time.

The behavior of user wait instructions in VMX non-root operation is
determined first by the setting of the "enable user wait and pause"
secondary processor-based VM-execution control bit 26.
	If the VM-execution control is 0, UMONITOR/UMWAIT/TPAUSE cause
an invalid-opcode exception (#UD).
	If the VM-execution control is 1, treatment is based on the
setting of the “RDTSC exiting†VM-execution control. Because KVM never
enables RDTSC exiting, if the instruction causes a delay, the amount of
time delayed is called here the physical delay. The physical delay is
first computed by determining the virtual delay. If
IA32_UMWAIT_CONTROL[31:2] is zero, the virtual delay is the value in
EDX:EAX minus the value that RDTSC would return; if
IA32_UMWAIT_CONTROL[31:2] is not zero, the virtual delay is the minimum
of that difference and AND(IA32_UMWAIT_CONTROL,FFFFFFFCH).

Because umwait and tpause can put a (psysical) CPU into a power saving
state, by default we dont't expose it to kvm and enable it only when
guest CPUID has it.

Detailed information about user wait instructions can be found in the
latest Intel 64 and IA-32 Architectures Software Developer's Manual.

Co-developed-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Jingqi Liu <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

arch/x86/include/asm/vmx.h

@@ -69,6 +69,7 @@
 #define SECONDARY_EXEC_PT_USE_GPA		0x01000000
 #define SECONDARY_EXEC_MODE_BASED_EPT_EXEC	0x00400000
 #define SECONDARY_EXEC_TSC_SCALING              0x02000000
+#define SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE	0x04000000
 
 #define PIN_BASED_EXT_INTR_MASK                 0x00000001
 #define PIN_BASED_NMI_EXITING                   0x00000008

arch/x86/kvm/cpuid.c

@@ -360,7 +360,7 @@ static inline void do_cpuid_7_mask(struct kvm_cpuid_entry2 *entry, int index)
 		F(AVX512VBMI) | F(LA57) | F(PKU) | 0 /*OSPKE*/ |
 		F(AVX512_VPOPCNTDQ) | F(UMIP) | F(AVX512_VBMI2) | F(GFNI) |
 		F(VAES) | F(VPCLMULQDQ) | F(AVX512_VNNI) | F(AVX512_BITALG) |
-		F(CLDEMOTE) | F(MOVDIRI) | F(MOVDIR64B);
+		F(CLDEMOTE) | F(MOVDIRI) | F(MOVDIR64B) | 0 /*WAITPKG*/;
 
 	/* cpuid 7.0.edx*/
 	const u32 kvm_cpuid_7_0_edx_x86_features =

arch/x86/kvm/vmx/capabilities.h

@@ -247,6 +247,12 @@ static inline bool vmx_xsaves_supported(void)
 		SECONDARY_EXEC_XSAVES;
 }
 
+static inline bool vmx_waitpkg_supported(void)
+{
+	return vmcs_config.cpu_based_2nd_exec_ctrl &
+		SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE;
+}
+
 static inline bool cpu_has_vmx_tsc_scaling(void)
 {
 	return vmcs_config.cpu_based_2nd_exec_ctrl &

arch/x86/kvm/vmx/nested.c

@@ -2089,6 +2089,7 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 				  SECONDARY_EXEC_ENABLE_INVPCID |
 				  SECONDARY_EXEC_RDTSCP |
 				  SECONDARY_EXEC_XSAVES |
+				  SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
 				  SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
 				  SECONDARY_EXEC_APIC_REGISTER_VIRT |
 				  SECONDARY_EXEC_ENABLE_VMFUNC);

arch/x86/kvm/vmx/vmx.c

@@ -2323,6 +2323,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf,
 			SECONDARY_EXEC_RDRAND_EXITING |
 			SECONDARY_EXEC_ENABLE_PML |
 			SECONDARY_EXEC_TSC_SCALING |
+			SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE |
 			SECONDARY_EXEC_PT_USE_GPA |
 			SECONDARY_EXEC_PT_CONCEAL_VMX |
 			SECONDARY_EXEC_ENABLE_VMFUNC |
@@ -4059,6 +4060,23 @@ static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx)
 		}
 	}
 
+	if (vmx_waitpkg_supported()) {
+		bool waitpkg_enabled =
+			guest_cpuid_has(vcpu, X86_FEATURE_WAITPKG);
+
+		if (!waitpkg_enabled)
+			exec_control &= ~SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE;
+
+		if (nested) {
+			if (waitpkg_enabled)
+				vmx->nested.msrs.secondary_ctls_high |=
+					SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE;
+			else
+				vmx->nested.msrs.secondary_ctls_high &=
+					~SECONDARY_EXEC_ENABLE_USR_WAIT_PAUSE;
+		}
+	}
+
 	vmx->secondary_exec_control = exec_control;
 }