media: dvb-frontends: a8293: fix LNB powerup failure in PCTV 461e
Fixes a8293 failure to raise LNB voltage in PCTV 461e DVB-S2 Stick affecting multiple users over several years as found here: http://www.linuxquestions.org/questions/linux-hardware-18/pctv-dvb-s2-stick-461e-not-feeding-lnb-4175529374/ https://www.linuxtv.org/wiki/index.php/Pinnacle_PCTV_DVB-S2_Stick_(461e) https://github.com/OpenELEC/OpenELEC.tv/issues/3731 Caused by vIN undervoltage lockout (status register bit 7) when raising LNB to 18V. Addressed by using the higher-precision voltages available on the a8293 to gradually increase (slew) the voltage when voltage increases are requested. Adds volt_slew_nanos_per_mv to a8293_platform_data struct for specifying slew rate. If value is <1 or non-sane (>1600), the original no-slew version for a8293_set_voltage is used. Link: https://lore.kernel.org/linux-media/20211231035326.6759-1-cjritola@gmail.com [mchehab: fixed some coding style issues] Signed-off-by: Chuck Ritola <cjritola@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This commit is contained in:
Chuck Ritola
Mauro Carvalho Chehab
parent
b5411dd4d5
commit
e6431a0c0d
|
|
@ -7,20 +7,148 @@
|
|||
|
||||
#include "a8293.h"
|
||||
|
||||
#define A8293_FLAG_ODT 0x10
|
||||
|
||||
struct a8293_dev {
|
||||
struct i2c_client *client;
|
||||
u8 reg[2];
|
||||
int volt_slew_nanos_per_mv;
|
||||
};
|
||||
|
||||
static int a8293_set_voltage(struct dvb_frontend *fe,
|
||||
enum fe_sec_voltage fe_sec_voltage)
|
||||
/*
|
||||
* When increasing voltage, do so in minimal steps over time, minimizing
|
||||
* risk of vIN undervoltage.
|
||||
*/
|
||||
|
||||
static int a8293_set_voltage_slew(struct a8293_dev *dev,
|
||||
struct i2c_client *client,
|
||||
enum fe_sec_voltage fe_sec_voltage,
|
||||
int min_nanos_per_mv)
|
||||
{
|
||||
int ret;
|
||||
u8 reg0, reg1;
|
||||
int new_volt_idx;
|
||||
const int idx_to_mv[] = {
|
||||
0, 12709, 13042, 13375, 14042, 15042, 18042, 18709, 19042
|
||||
};
|
||||
const u8 idx_to_reg[] = {
|
||||
0x00, 0x20, 0x21, 0x22, 0x24, 0x27, 0x28, 0x2A, 0x2B
|
||||
};
|
||||
int this_volt_idx;
|
||||
u8 status;
|
||||
int prev_volt_idx;
|
||||
|
||||
dev_dbg(&client->dev, "set_voltage_slew fe_sec_voltage=%d\n",
|
||||
fe_sec_voltage);
|
||||
|
||||
/* Read status register to clear any stale faults. */
|
||||
ret = i2c_master_recv(client, &status, 1);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
|
||||
/* Determine previous voltage */
|
||||
switch (dev->reg[0] & 0x2F) {
|
||||
case 0x00:
|
||||
prev_volt_idx = 0;
|
||||
break;
|
||||
case 0x20:
|
||||
prev_volt_idx = 1;
|
||||
break;
|
||||
case 0x21:
|
||||
prev_volt_idx = 2;
|
||||
break;
|
||||
case 0x22:
|
||||
prev_volt_idx = 3;
|
||||
break;
|
||||
case 0x24:
|
||||
prev_volt_idx = 4;
|
||||
break;
|
||||
case 0x27:
|
||||
prev_volt_idx = 5;
|
||||
break;
|
||||
case 0x28:
|
||||
prev_volt_idx = 6;
|
||||
break;
|
||||
case 0x2A:
|
||||
prev_volt_idx = 7;
|
||||
break;
|
||||
case 0x2B:
|
||||
prev_volt_idx = 8;
|
||||
break;
|
||||
default:
|
||||
prev_volt_idx = 0;
|
||||
}
|
||||
|
||||
/* Determine new voltage */
|
||||
switch (fe_sec_voltage) {
|
||||
case SEC_VOLTAGE_OFF:
|
||||
new_volt_idx = 0;
|
||||
break;
|
||||
case SEC_VOLTAGE_13:
|
||||
new_volt_idx = 2;
|
||||
break;
|
||||
case SEC_VOLTAGE_18:
|
||||
new_volt_idx = 6;
|
||||
break;
|
||||
default:
|
||||
ret = -EINVAL;
|
||||
goto err;
|
||||
}
|
||||
|
||||
/* Slew to new voltage if new voltage is greater than current voltage */
|
||||
this_volt_idx = prev_volt_idx;
|
||||
if (this_volt_idx < new_volt_idx) {
|
||||
while (this_volt_idx < new_volt_idx) {
|
||||
int delta_mv = idx_to_mv[this_volt_idx+1] - idx_to_mv[this_volt_idx];
|
||||
int min_wait_time = delta_mv * min_nanos_per_mv;
|
||||
|
||||
reg0 = idx_to_reg[this_volt_idx+1];
|
||||
reg0 |= A8293_FLAG_ODT;
|
||||
|
||||
ret = i2c_master_send(client, ®0, 1);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
dev->reg[0] = reg0;
|
||||
this_volt_idx++;
|
||||
usleep_range(min_wait_time, min_wait_time * 2);
|
||||
}
|
||||
} else { /* Else just set the voltage */
|
||||
reg0 = idx_to_reg[new_volt_idx];
|
||||
reg0 |= A8293_FLAG_ODT;
|
||||
ret = i2c_master_send(client, ®0, 1);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
dev->reg[0] = reg0;
|
||||
}
|
||||
|
||||
/* TMODE=0, TGATE=1 */
|
||||
reg1 = 0x82;
|
||||
if (reg1 != dev->reg[1]) {
|
||||
ret = i2c_master_send(client, ®1, 1);
|
||||
if (ret < 0)
|
||||
goto err;
|
||||
dev->reg[1] = reg1;
|
||||
}
|
||||
|
||||
usleep_range(1500, 5000);
|
||||
|
||||
return 0;
|
||||
err:
|
||||
dev_dbg(&client->dev, "failed=%d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
static int a8293_set_voltage_noslew(struct dvb_frontend *fe,
|
||||
enum fe_sec_voltage fe_sec_voltage)
|
||||
{
|
||||
struct a8293_dev *dev = fe->sec_priv;
|
||||
struct i2c_client *client = dev->client;
|
||||
int ret;
|
||||
u8 reg0, reg1;
|
||||
|
||||
dev_dbg(&client->dev, "fe_sec_voltage=%d\n", fe_sec_voltage);
|
||||
dev_dbg(&client->dev, "set_voltage_noslew fe_sec_voltage=%d\n",
|
||||
fe_sec_voltage);
|
||||
|
||||
switch (fe_sec_voltage) {
|
||||
case SEC_VOLTAGE_OFF:
|
||||
|
|
@ -62,6 +190,26 @@ err:
|
|||
return ret;
|
||||
}
|
||||
|
||||
static int a8293_set_voltage(struct dvb_frontend *fe,
|
||||
enum fe_sec_voltage fe_sec_voltage)
|
||||
{
|
||||
struct a8293_dev *dev = fe->sec_priv;
|
||||
struct i2c_client *client = dev->client;
|
||||
int volt_slew_nanos_per_mv = dev->volt_slew_nanos_per_mv;
|
||||
|
||||
dev_dbg(&client->dev, "set_voltage volt_slew_nanos_per_mv=%d\n",
|
||||
volt_slew_nanos_per_mv);
|
||||
|
||||
/* Use slew version if slew rate is set to a sane value */
|
||||
if (volt_slew_nanos_per_mv > 0 && volt_slew_nanos_per_mv < 1600)
|
||||
a8293_set_voltage_slew(dev, client, fe_sec_voltage,
|
||||
volt_slew_nanos_per_mv);
|
||||
else
|
||||
a8293_set_voltage_noslew(fe, fe_sec_voltage);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int a8293_probe(struct i2c_client *client)
|
||||
{
|
||||
struct a8293_dev *dev;
|
||||
|
|
@ -77,6 +225,7 @@ static int a8293_probe(struct i2c_client *client)
|
|||
}
|
||||
|
||||
dev->client = client;
|
||||
dev->volt_slew_nanos_per_mv = pdata->volt_slew_nanos_per_mv;
|
||||
|
||||
/* check if the SEC is there */
|
||||
ret = i2c_master_recv(client, buf, 2);
|
||||
|
|
|
|||
|
|
@ -18,9 +18,12 @@
|
|||
/**
|
||||
* struct a8293_platform_data - Platform data for the a8293 driver
|
||||
* @dvb_frontend: DVB frontend.
|
||||
* @volt_slew_nanos_per_mv: Slew rate when increasing LNB voltage,
|
||||
* in nanoseconds per millivolt.
|
||||
*/
|
||||
struct a8293_platform_data {
|
||||
struct dvb_frontend *dvb_frontend;
|
||||
int volt_slew_nanos_per_mv;
|
||||
};
|
||||
|
||||
#endif /* A8293_H */
|
||||
|
|
|
|||
|
|
@ -1204,6 +1204,12 @@ static int em28178_dvb_init_pctv_461e(struct em28xx *dev)
|
|||
|
||||
/* attach SEC */
|
||||
a8293_pdata.dvb_frontend = dvb->fe[0];
|
||||
/*
|
||||
* 461e has a tendency to have vIN undervoltage troubles.
|
||||
* Slew mitigates this.
|
||||
*/
|
||||
a8293_pdata.volt_slew_nanos_per_mv = 20;
|
||||
|
||||
dvb->i2c_client_sec = dvb_module_probe("a8293", NULL,
|
||||
&dev->i2c_adap[dev->def_i2c_bus],
|
||||
0x08, &a8293_pdata);
|
||||
|
|
|
|||
Loading…
Reference in New Issue