diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile index 4d16634c9341..bcc9ce816d05 100644 --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_COMEDI) += comedi_parport.o # Comedi PCI drivers obj-$(CONFIG_COMEDI_PCI_DRIVERS) += mite.o obj-$(CONFIG_COMEDI_PCI_DRIVERS) += icp_multi.o +obj-$(CONFIG_COMEDI_PCI_DRIVERS) += me4000.o # Comedi USB drivers obj-$(CONFIG_COMEDI_USB_DRIVERS) += usbdux.o diff --git a/drivers/staging/comedi/drivers/me4000.c b/drivers/staging/comedi/drivers/me4000.c new file mode 100644 index 000000000000..b432aa7d7644 --- /dev/null +++ b/drivers/staging/comedi/drivers/me4000.c @@ -0,0 +1,2362 @@ +/* + comedi/drivers/me4000.c + Source code for the Meilhaus ME-4000 board family. + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 2000 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + */ +/* +Driver: me4000 +Description: Meilhaus ME-4000 series boards +Devices: [Meilhaus] ME-4650 (me4000), ME-4670i, ME-4680, ME-4680i, ME-4680is +Author: gg (Guenter Gebhardt ) +Updated: Mon, 18 Mar 2002 15:34:01 -0800 +Status: broken (no support for loading firmware) + +Supports: + + - Analog Input + - Analog Output + - Digital I/O + - Counter + +Configuration Options: + + [0] - PCI bus number (optional) + [1] - PCI slot number (optional) + + If bus/slot is not specified, the first available PCI + device will be used. + +The firmware required by these boards is available in the +comedi_nonfree_firmware tarball available from +http://www.comedi.org. However, the driver's support for +loading the firmware through comedi_config is currently +broken. + + */ + +#include "../comedidev.h" + +#include +#include +#include + +#include "comedi_pci.h" +#include "me4000.h" +#if 0 +/* file removed due to GPL incompatibility */ +#include "me4000_fw.h" +#endif + +/*============================================================================= + PCI device table. + This is used by modprobe to translate PCI IDs to drivers. + ===========================================================================*/ + +static DEFINE_PCI_DEVICE_TABLE(me4000_pci_table) = { + {PCI_VENDOR_ID_MEILHAUS, 0x4650, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + + {PCI_VENDOR_ID_MEILHAUS, 0x4660, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4661, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4662, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4663, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + + {PCI_VENDOR_ID_MEILHAUS, 0x4670, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4671, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4672, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4673, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + + {PCI_VENDOR_ID_MEILHAUS, 0x4680, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4681, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4682, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + {PCI_VENDOR_ID_MEILHAUS, 0x4683, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + + {0} +}; + +MODULE_DEVICE_TABLE(pci, me4000_pci_table); + +static const me4000_board_t me4000_boards[] = { + {"ME-4650", 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}}, + + {"ME-4660", 0x4660, {0, 0}, {32, 0, 16, 0}, {4}, {3}}, + {"ME-4660i", 0x4661, {0, 0}, {32, 0, 16, 0}, {4}, {3}}, + {"ME-4660s", 0x4662, {0, 0}, {32, 8, 16, 0}, {4}, {3}}, + {"ME-4660is", 0x4663, {0, 0}, {32, 8, 16, 0}, {4}, {3}}, + + {"ME-4670", 0x4670, {4, 0}, {32, 0, 16, 1}, {4}, {3}}, + {"ME-4670i", 0x4671, {4, 0}, {32, 0, 16, 1}, {4}, {3}}, + {"ME-4670s", 0x4672, {4, 0}, {32, 8, 16, 1}, {4}, {3}}, + {"ME-4670is", 0x4673, {4, 0}, {32, 8, 16, 1}, {4}, {3}}, + + {"ME-4680", 0x4680, {4, 4}, {32, 0, 16, 1}, {4}, {3}}, + {"ME-4680i", 0x4681, {4, 4}, {32, 0, 16, 1}, {4}, {3}}, + {"ME-4680s", 0x4682, {4, 4}, {32, 8, 16, 1}, {4}, {3}}, + {"ME-4680is", 0x4683, {4, 4}, {32, 8, 16, 1}, {4}, {3}}, + + {0}, +}; + +#define ME4000_BOARD_VERSIONS (sizeof(me4000_boards) / sizeof(me4000_board_t) - 1) + +/*----------------------------------------------------------------------------- + Comedi function prototypes + ---------------------------------------------------------------------------*/ +static int me4000_attach(comedi_device * dev, comedi_devconfig * it); +static int me4000_detach(comedi_device * dev); +static comedi_driver driver_me4000 = { + driver_name:"me4000", + module:THIS_MODULE, + attach:me4000_attach, + detach:me4000_detach, +}; + +/*----------------------------------------------------------------------------- + Meilhaus function prototypes + ---------------------------------------------------------------------------*/ +static int me4000_probe(comedi_device * dev, comedi_devconfig * it); +static int get_registers(comedi_device * dev, struct pci_dev *pci_dev_p); +static int init_board_info(comedi_device * dev, struct pci_dev *pci_dev_p); +static int init_ao_context(comedi_device * dev); +static int init_ai_context(comedi_device * dev); +static int init_dio_context(comedi_device * dev); +static int init_cnt_context(comedi_device * dev); +static int xilinx_download(comedi_device * dev); +static int reset_board(comedi_device * dev); + +static int me4000_dio_insn_bits(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int me4000_dio_insn_config(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int cnt_reset(comedi_device * dev, unsigned int channel); + +static int cnt_config(comedi_device * dev, + unsigned int channel, unsigned int mode); + +static int me4000_cnt_insn_config(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int me4000_cnt_insn_write(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int me4000_cnt_insn_read(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int me4000_ai_insn_read(comedi_device * dev, + comedi_subdevice * subdevice, comedi_insn * insn, lsampl_t * data); + +static int me4000_ai_cancel(comedi_device * dev, comedi_subdevice * s); + +static int ai_check_chanlist(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd); + +static int ai_round_cmd_args(comedi_device * dev, + comedi_subdevice * s, + comedi_cmd * cmd, + unsigned int *init_ticks, + unsigned int *scan_ticks, unsigned int *chan_ticks); + +static int ai_prepare(comedi_device * dev, + comedi_subdevice * s, + comedi_cmd * cmd, + unsigned int init_ticks, + unsigned int scan_ticks, unsigned int chan_ticks); + +static int ai_write_chanlist(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd); + +static irqreturn_t me4000_ai_isr(int irq, void *dev_id PT_REGS_ARG); + +static int me4000_ai_do_cmd_test(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd); + +static int me4000_ai_do_cmd(comedi_device * dev, comedi_subdevice * s); + +static int me4000_ao_insn_write(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +static int me4000_ao_insn_read(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data); + +/*----------------------------------------------------------------------------- + Meilhaus inline functions + ---------------------------------------------------------------------------*/ + +static inline void me4000_outb(comedi_device * dev, unsigned char value, + unsigned long port) +{ + PORT_PDEBUG("--> 0x%02X port 0x%04lX\n", value, port); + outb(value, port); +} + +static inline void me4000_outl(comedi_device * dev, unsigned long value, + unsigned long port) +{ + PORT_PDEBUG("--> 0x%08lX port 0x%04lX\n", value, port); + outl(value, port); +} + +static inline unsigned long me4000_inl(comedi_device * dev, unsigned long port) +{ + unsigned long value; + value = inl(port); + PORT_PDEBUG("<-- 0x%08lX port 0x%04lX\n", value, port); + return value; +} + +static inline unsigned char me4000_inb(comedi_device * dev, unsigned long port) +{ + unsigned char value; + value = inb(port); + PORT_PDEBUG("<-- 0x%08X port 0x%04lX\n", value, port); + return value; +} + +static const comedi_lrange me4000_ai_range = { + 4, + { + UNI_RANGE(2.5), + UNI_RANGE(10), + BIP_RANGE(2.5), + BIP_RANGE(10), + } +}; + +static const comedi_lrange me4000_ao_range = { + 1, + { + BIP_RANGE(10), + } +}; + +static int me4000_attach(comedi_device * dev, comedi_devconfig * it) +{ + comedi_subdevice *s; + int result; + + CALL_PDEBUG("In me4000_attach()\n"); + + result = me4000_probe(dev, it); + if (result) + return result; + + /* + * Allocate the subdevice structures. alloc_subdevice() is a + * convenient macro defined in comedidev.h. It relies on + * n_subdevices being set correctly. + */ + if (alloc_subdevices(dev, 4) < 0) + return -ENOMEM; + + /*========================================================================= + Analog input subdevice + ========================================================================*/ + + s = dev->subdevices + 0; + + if (thisboard->ai.count) { + s->type = COMEDI_SUBD_AI; + s->subdev_flags = + SDF_READABLE | SDF_COMMON | SDF_GROUND | SDF_DIFF; + s->n_chan = thisboard->ai.count; + s->maxdata = 0xFFFF; // 16 bit ADC + s->len_chanlist = ME4000_AI_CHANNEL_LIST_COUNT; + s->range_table = &me4000_ai_range; + s->insn_read = me4000_ai_insn_read; + + if (info->irq > 0) { + if (comedi_request_irq(info->irq, me4000_ai_isr, + IRQF_SHARED, "ME-4000", dev)) { + printk("comedi%d: me4000: me4000_attach(): Unable to allocate irq\n", dev->minor); + } else { + dev->read_subdev = s; + s->subdev_flags |= SDF_CMD_READ; + s->cancel = me4000_ai_cancel; + s->do_cmdtest = me4000_ai_do_cmd_test; + s->do_cmd = me4000_ai_do_cmd; + } + } else { + printk(KERN_WARNING + "comedi%d: me4000: me4000_attach(): No interrupt available\n", + dev->minor); + } + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + /*========================================================================= + Analog output subdevice + ========================================================================*/ + + s = dev->subdevices + 1; + + if (thisboard->ao.count) { + s->type = COMEDI_SUBD_AO; + s->subdev_flags = SDF_WRITEABLE | SDF_COMMON | SDF_GROUND; + s->n_chan = thisboard->ao.count; + s->maxdata = 0xFFFF; // 16 bit DAC + s->range_table = &me4000_ao_range; + s->insn_write = me4000_ao_insn_write; + s->insn_read = me4000_ao_insn_read; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + /*========================================================================= + Digital I/O subdevice + ========================================================================*/ + + s = dev->subdevices + 2; + + if (thisboard->dio.count) { + s->type = COMEDI_SUBD_DIO; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = thisboard->dio.count * 8; + s->maxdata = 1; + s->range_table = &range_digital; + s->insn_bits = me4000_dio_insn_bits; + s->insn_config = me4000_dio_insn_config; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + /* + * Check for optoisolated ME-4000 version. If one the first + * port is a fixed output port and the second is a fixed input port. + */ + if (!me4000_inl(dev, info->dio_context.dir_reg)) { + s->io_bits |= 0xFF; + me4000_outl(dev, ME4000_DIO_CTRL_BIT_MODE_0, + info->dio_context.dir_reg); + } + + /*========================================================================= + Counter subdevice + ========================================================================*/ + + s = dev->subdevices + 3; + + if (thisboard->cnt.count) { + s->type = COMEDI_SUBD_COUNTER; + s->subdev_flags = SDF_READABLE | SDF_WRITABLE; + s->n_chan = thisboard->cnt.count; + s->maxdata = 0xFFFF; // 16 bit counters + s->insn_read = me4000_cnt_insn_read; + s->insn_write = me4000_cnt_insn_write; + s->insn_config = me4000_cnt_insn_config; + } else { + s->type = COMEDI_SUBD_UNUSED; + } + + return 0; +} + +static int me4000_probe(comedi_device * dev, comedi_devconfig * it) +{ + struct pci_dev *pci_device; + int result, i; + me4000_board_t *board; + + CALL_PDEBUG("In me4000_probe()\n"); + + /* Allocate private memory */ + if (alloc_private(dev, sizeof(me4000_info_t)) < 0) { + return -ENOMEM; + } + /* + * Probe the device to determine what device in the series it is. + */ + for (pci_device = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, NULL); + pci_device != NULL; + pci_device = + pci_get_device(PCI_ANY_ID, PCI_ANY_ID, pci_device)) { + if (pci_device->vendor == PCI_VENDOR_ID_MEILHAUS) { + for (i = 0; i < ME4000_BOARD_VERSIONS; i++) { + if (me4000_boards[i].device_id == + pci_device->device) { + /* Was a particular bus/slot requested? */ + if ((it->options[0] != 0) + || (it->options[1] != 0)) { + /* Are we on the wrong bus/slot? */ + if (pci_device->bus->number != + it->options[0] + || PCI_SLOT(pci_device-> + devfn) != + it->options[1]) { + continue; + } + } + dev->board_ptr = me4000_boards + i; + board = (me4000_board_t *) dev-> + board_ptr; + info->pci_dev_p = pci_device; + goto found; + } + } + } + } + + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): No supported board found (req. bus/slot : %d/%d)\n", + dev->minor, it->options[0], it->options[1]); + return -ENODEV; + + found: + + printk(KERN_INFO + "comedi%d: me4000: me4000_probe(): Found %s at PCI bus %d, slot %d\n", + dev->minor, me4000_boards[i].name, pci_device->bus->number, + PCI_SLOT(pci_device->devfn)); + + /* Set data in device structure */ + dev->board_name = board->name; + + /* Enable PCI device and request regions */ + result = comedi_pci_enable(pci_device, dev->board_name); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot enable PCI device and request I/O regions\n", + dev->minor); + return result; + } + + /* Get the PCI base registers */ + result = get_registers(dev, pci_device); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot get registers\n", + dev->minor); + return result; + } + /* Initialize board info */ + result = init_board_info(dev, pci_device); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot init baord info\n", + dev->minor); + return result; + } + + /* Init analog output context */ + result = init_ao_context(dev); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot init ao context\n", + dev->minor); + return result; + } + + /* Init analog input context */ + result = init_ai_context(dev); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot init ai context\n", + dev->minor); + return result; + } + + /* Init digital I/O context */ + result = init_dio_context(dev); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot init dio context\n", + dev->minor); + return result; + } + + /* Init counter context */ + result = init_cnt_context(dev); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Cannot init cnt context\n", + dev->minor); + return result; + } + + /* Download the xilinx firmware */ + result = xilinx_download(dev); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Can't download firmware\n", + dev->minor); + return result; + } + + /* Make a hardware reset */ + result = reset_board(dev); + if (result) { + printk(KERN_ERR + "comedi%d: me4000: me4000_probe(): Can't reset board\n", + dev->minor); + return result; + } + + return 0; +} + +static int get_registers(comedi_device * dev, struct pci_dev *pci_dev_p) +{ + + CALL_PDEBUG("In get_registers()\n"); + + /*--------------------------- plx regbase ---------------------------------*/ + + info->plx_regbase = pci_resource_start(pci_dev_p, 1); + if (info->plx_regbase == 0) { + printk(KERN_ERR + "comedi%d: me4000: get_registers(): PCI base address 1 is not available\n", + dev->minor); + return -ENODEV; + } + info->plx_regbase_size = pci_resource_len(pci_dev_p, 1); + + /*--------------------------- me4000 regbase ------------------------------*/ + + info->me4000_regbase = pci_resource_start(pci_dev_p, 2); + if (info->me4000_regbase == 0) { + printk(KERN_ERR + "comedi%d: me4000: get_registers(): PCI base address 2 is not available\n", + dev->minor); + return -ENODEV; + } + info->me4000_regbase_size = pci_resource_len(pci_dev_p, 2); + + /*--------------------------- timer regbase ------------------------------*/ + + info->timer_regbase = pci_resource_start(pci_dev_p, 3); + if (info->timer_regbase == 0) { + printk(KERN_ERR + "comedi%d: me4000: get_registers(): PCI base address 3 is not available\n", + dev->minor); + return -ENODEV; + } + info->timer_regbase_size = pci_resource_len(pci_dev_p, 3); + + /*--------------------------- program regbase ------------------------------*/ + + info->program_regbase = pci_resource_start(pci_dev_p, 5); + if (info->program_regbase == 0) { + printk(KERN_ERR + "comedi%d: me4000: get_registers(): PCI base address 5 is not available\n", + dev->minor); + return -ENODEV; + } + info->program_regbase_size = pci_resource_len(pci_dev_p, 5); + + return 0; +} + +static int init_board_info(comedi_device * dev, struct pci_dev *pci_dev_p) +{ + int result; + + CALL_PDEBUG("In init_board_info()\n"); + + /* Init spin locks */ + //spin_lock_init(&info->preload_lock); + //spin_lock_init(&info->ai_ctrl_lock); + + /* Get the serial number */ + result = pci_read_config_dword(pci_dev_p, 0x2C, &info->serial_no); + if (result != PCIBIOS_SUCCESSFUL) { + return result; + } + + /* Get the hardware revision */ + result = pci_read_config_byte(pci_dev_p, 0x08, &info->hw_revision); + if (result != PCIBIOS_SUCCESSFUL) { + return result; + } + + /* Get the vendor id */ + info->vendor_id = pci_dev_p->vendor; + + /* Get the device id */ + info->device_id = pci_dev_p->device; + + /* Get the irq assigned to the board */ + info->irq = pci_dev_p->irq; + + return 0; +} + +static int init_ao_context(comedi_device * dev) +{ + int i; + + CALL_PDEBUG("In init_ao_context()\n"); + + for (i = 0; i < thisboard->ao.count; i++) { + //spin_lock_init(&info->ao_context[i].use_lock); + info->ao_context[i].irq = info->irq; + + switch (i) { + case 0: + info->ao_context[i].ctrl_reg = + info->me4000_regbase + ME4000_AO_00_CTRL_REG; + info->ao_context[i].status_reg = + info->me4000_regbase + ME4000_AO_00_STATUS_REG; + info->ao_context[i].fifo_reg = + info->me4000_regbase + ME4000_AO_00_FIFO_REG; + info->ao_context[i].single_reg = + info->me4000_regbase + ME4000_AO_00_SINGLE_REG; + info->ao_context[i].timer_reg = + info->me4000_regbase + ME4000_AO_00_TIMER_REG; + info->ao_context[i].irq_status_reg = + info->me4000_regbase + ME4000_IRQ_STATUS_REG; + info->ao_context[i].preload_reg = + info->me4000_regbase + ME4000_AO_LOADSETREG_XX; + break; + case 1: + info->ao_context[i].ctrl_reg = + info->me4000_regbase + ME4000_AO_01_CTRL_REG; + info->ao_context[i].status_reg = + info->me4000_regbase + ME4000_AO_01_STATUS_REG; + info->ao_context[i].fifo_reg = + info->me4000_regbase + ME4000_AO_01_FIFO_REG; + info->ao_context[i].single_reg = + info->me4000_regbase + ME4000_AO_01_SINGLE_REG; + info->ao_context[i].timer_reg = + info->me4000_regbase + ME4000_AO_01_TIMER_REG; + info->ao_context[i].irq_status_reg = + info->me4000_regbase + ME4000_IRQ_STATUS_REG; + info->ao_context[i].preload_reg = + info->me4000_regbase + ME4000_AO_LOADSETREG_XX; + break; + case 2: + info->ao_context[i].ctrl_reg = + info->me4000_regbase + ME4000_AO_02_CTRL_REG; + info->ao_context[i].status_reg = + info->me4000_regbase + ME4000_AO_02_STATUS_REG; + info->ao_context[i].fifo_reg = + info->me4000_regbase + ME4000_AO_02_FIFO_REG; + info->ao_context[i].single_reg = + info->me4000_regbase + ME4000_AO_02_SINGLE_REG; + info->ao_context[i].timer_reg = + info->me4000_regbase + ME4000_AO_02_TIMER_REG; + info->ao_context[i].irq_status_reg = + info->me4000_regbase + ME4000_IRQ_STATUS_REG; + info->ao_context[i].preload_reg = + info->me4000_regbase + ME4000_AO_LOADSETREG_XX; + break; + case 3: + info->ao_context[i].ctrl_reg = + info->me4000_regbase + ME4000_AO_03_CTRL_REG; + info->ao_context[i].status_reg = + info->me4000_regbase + ME4000_AO_03_STATUS_REG; + info->ao_context[i].fifo_reg = + info->me4000_regbase + ME4000_AO_03_FIFO_REG; + info->ao_context[i].single_reg = + info->me4000_regbase + ME4000_AO_03_SINGLE_REG; + info->ao_context[i].timer_reg = + info->me4000_regbase + ME4000_AO_03_TIMER_REG; + info->ao_context[i].irq_status_reg = + info->me4000_regbase + ME4000_IRQ_STATUS_REG; + info->ao_context[i].preload_reg = + info->me4000_regbase + ME4000_AO_LOADSETREG_XX; + break; + default: + break; + } + } + + return 0; +} + +static int init_ai_context(comedi_device * dev) +{ + + CALL_PDEBUG("In init_ai_context()\n"); + + info->ai_context.irq = info->irq; + + info->ai_context.ctrl_reg = info->me4000_regbase + ME4000_AI_CTRL_REG; + info->ai_context.status_reg = + info->me4000_regbase + ME4000_AI_STATUS_REG; + info->ai_context.channel_list_reg = + info->me4000_regbase + ME4000_AI_CHANNEL_LIST_REG; + info->ai_context.data_reg = info->me4000_regbase + ME4000_AI_DATA_REG; + info->ai_context.chan_timer_reg = + info->me4000_regbase + ME4000_AI_CHAN_TIMER_REG; + info->ai_context.chan_pre_timer_reg = + info->me4000_regbase + ME4000_AI_CHAN_PRE_TIMER_REG; + info->ai_context.scan_timer_low_reg = + info->me4000_regbase + ME4000_AI_SCAN_TIMER_LOW_REG; + info->ai_context.scan_timer_high_reg = + info->me4000_regbase + ME4000_AI_SCAN_TIMER_HIGH_REG; + info->ai_context.scan_pre_timer_low_reg = + info->me4000_regbase + ME4000_AI_SCAN_PRE_TIMER_LOW_REG; + info->ai_context.scan_pre_timer_high_reg = + info->me4000_regbase + ME4000_AI_SCAN_PRE_TIMER_HIGH_REG; + info->ai_context.start_reg = info->me4000_regbase + ME4000_AI_START_REG; + info->ai_context.irq_status_reg = + info->me4000_regbase + ME4000_IRQ_STATUS_REG; + info->ai_context.sample_counter_reg = + info->me4000_regbase + ME4000_AI_SAMPLE_COUNTER_REG; + + return 0; +} + +static int init_dio_context(comedi_device * dev) +{ + + CALL_PDEBUG("In init_dio_context()\n"); + + info->dio_context.dir_reg = info->me4000_regbase + ME4000_DIO_DIR_REG; + info->dio_context.ctrl_reg = info->me4000_regbase + ME4000_DIO_CTRL_REG; + info->dio_context.port_0_reg = + info->me4000_regbase + ME4000_DIO_PORT_0_REG; + info->dio_context.port_1_reg = + info->me4000_regbase + ME4000_DIO_PORT_1_REG; + info->dio_context.port_2_reg = + info->me4000_regbase + ME4000_DIO_PORT_2_REG; + info->dio_context.port_3_reg = + info->me4000_regbase + ME4000_DIO_PORT_3_REG; + + return 0; +} + +static int init_cnt_context(comedi_device * dev) +{ + + CALL_PDEBUG("In init_cnt_context()\n"); + + info->cnt_context.ctrl_reg = info->timer_regbase + ME4000_CNT_CTRL_REG; + info->cnt_context.counter_0_reg = + info->timer_regbase + ME4000_CNT_COUNTER_0_REG; + info->cnt_context.counter_1_reg = + info->timer_regbase + ME4000_CNT_COUNTER_1_REG; + info->cnt_context.counter_2_reg = + info->timer_regbase + ME4000_CNT_COUNTER_2_REG; + + return 0; +} + +#define FIRMWARE_NOT_AVAILABLE 1 +#if FIRMWARE_NOT_AVAILABLE +extern unsigned char *xilinx_firm; +#endif + +static int xilinx_download(comedi_device * dev) +{ + u32 value = 0; + wait_queue_head_t queue; + int idx = 0; + int size = 0; + + CALL_PDEBUG("In xilinx_download()\n"); + + init_waitqueue_head(&queue); + + /* + * Set PLX local interrupt 2 polarity to high. + * Interrupt is thrown by init pin of xilinx. + */ + outl(0x10, info->plx_regbase + PLX_INTCSR); + + /* Set /CS and /WRITE of the Xilinx */ + value = inl(info->plx_regbase + PLX_ICR); + value |= 0x100; + outl(value, info->plx_regbase + PLX_ICR); + + /* Init Xilinx with CS1 */ + inb(info->program_regbase + 0xC8); + + /* Wait until /INIT pin is set */ + udelay(20); + if (!inl(info->plx_regbase + PLX_INTCSR) & 0x20) { + printk(KERN_ERR + "comedi%d: me4000: xilinx_download(): Can't init Xilinx\n", + dev->minor); + return -EIO; + } + + /* Reset /CS and /WRITE of the Xilinx */ + value = inl(info->plx_regbase + PLX_ICR); + value &= ~0x100; + outl(value, info->plx_regbase + PLX_ICR); + if (FIRMWARE_NOT_AVAILABLE) { + comedi_error(dev, + "xilinx firmware unavailable due to licensing, aborting"); + return -EIO; + } else { + /* Download Xilinx firmware */ + size = (xilinx_firm[0] << 24) + (xilinx_firm[1] << 16) + + (xilinx_firm[2] << 8) + xilinx_firm[3]; + udelay(10); + + for (idx = 0; idx < size; idx++) { + outb(xilinx_firm[16 + idx], info->program_regbase); + udelay(10); + + /* Check if BUSY flag is low */ + if (inl(info->plx_regbase + PLX_ICR) & 0x20) { + printk(KERN_ERR + "comedi%d: me4000: xilinx_download(): Xilinx is still busy (idx = %d)\n", + dev->minor, idx); + return -EIO; + } + } + } + + /* If done flag is high download was successful */ + if (inl(info->plx_regbase + PLX_ICR) & 0x4) { + } else { + printk(KERN_ERR + "comedi%d: me4000: xilinx_download(): DONE flag is not set\n", + dev->minor); + printk(KERN_ERR + "comedi%d: me4000: xilinx_download(): Download not succesful\n", + dev->minor); + return -EIO; + } + + /* Set /CS and /WRITE */ + value = inl(info->plx_regbase + PLX_ICR); + value |= 0x100; + outl(value, info->plx_regbase + PLX_ICR); + + return 0; +} + +static int reset_board(comedi_device * dev) +{ + unsigned long icr; + + CALL_PDEBUG("In reset_board()\n"); + + /* Make a hardware reset */ + icr = me4000_inl(dev, info->plx_regbase + PLX_ICR); + icr |= 0x40000000; + me4000_outl(dev, icr, info->plx_regbase + PLX_ICR); + icr &= ~0x40000000; + me4000_outl(dev, icr, info->plx_regbase + PLX_ICR); + + /* 0x8000 to the DACs means an output voltage of 0V */ + me4000_outl(dev, 0x8000, + info->me4000_regbase + ME4000_AO_00_SINGLE_REG); + me4000_outl(dev, 0x8000, + info->me4000_regbase + ME4000_AO_01_SINGLE_REG); + me4000_outl(dev, 0x8000, + info->me4000_regbase + ME4000_AO_02_SINGLE_REG); + me4000_outl(dev, 0x8000, + info->me4000_regbase + ME4000_AO_03_SINGLE_REG); + + /* Set both stop bits in the analog input control register */ + me4000_outl(dev, + ME4000_AI_CTRL_BIT_IMMEDIATE_STOP | ME4000_AI_CTRL_BIT_STOP, + info->me4000_regbase + ME4000_AI_CTRL_REG); + + /* Set both stop bits in the analog output control register */ + me4000_outl(dev, + ME4000_AO_CTRL_BIT_IMMEDIATE_STOP | ME4000_AO_CTRL_BIT_STOP, + info->me4000_regbase + ME4000_AO_00_CTRL_REG); + me4000_outl(dev, + ME4000_AO_CTRL_BIT_IMMEDIATE_STOP | ME4000_AO_CTRL_BIT_STOP, + info->me4000_regbase + ME4000_AO_01_CTRL_REG); + me4000_outl(dev, + ME4000_AO_CTRL_BIT_IMMEDIATE_STOP | ME4000_AO_CTRL_BIT_STOP, + info->me4000_regbase + ME4000_AO_02_CTRL_REG); + me4000_outl(dev, + ME4000_AO_CTRL_BIT_IMMEDIATE_STOP | ME4000_AO_CTRL_BIT_STOP, + info->me4000_regbase + ME4000_AO_03_CTRL_REG); + + /* Enable interrupts on the PLX */ + me4000_outl(dev, 0x43, info->plx_regbase + PLX_INTCSR); + + /* Set the adustment register for AO demux */ + me4000_outl(dev, ME4000_AO_DEMUX_ADJUST_VALUE, + info->me4000_regbase + ME4000_AO_DEMUX_ADJUST_REG); + + /* Set digital I/O direction for port 0 to output on isolated versions */ + if (!(me4000_inl(dev, info->me4000_regbase + ME4000_DIO_DIR_REG) & 0x1)) { + me4000_outl(dev, 0x1, + info->me4000_regbase + ME4000_DIO_CTRL_REG); + } + + return 0; +} + +static int me4000_detach(comedi_device * dev) +{ + CALL_PDEBUG("In me4000_detach()\n"); + + if (info) { + if (info->pci_dev_p) { + reset_board(dev); + if (info->plx_regbase) { + comedi_pci_disable(info->pci_dev_p); + } + pci_dev_put(info->pci_dev_p); + } + } + + return 0; +} + +/*============================================================================= + Analog input section + ===========================================================================*/ + +static int me4000_ai_insn_read(comedi_device * dev, + comedi_subdevice * subdevice, comedi_insn * insn, lsampl_t * data) +{ + + int chan = CR_CHAN(insn->chanspec); + int rang = CR_RANGE(insn->chanspec); + int aref = CR_AREF(insn->chanspec); + + unsigned long entry = 0; + unsigned long tmp; + long lval; + + CALL_PDEBUG("In me4000_ai_insn_read()\n"); + + if (insn->n == 0) { + return 0; + } else if (insn->n > 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Invalid instruction length %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + switch (rang) { + case 0: + entry |= ME4000_AI_LIST_RANGE_UNIPOLAR_2_5; + break; + case 1: + entry |= ME4000_AI_LIST_RANGE_UNIPOLAR_10; + break; + case 2: + entry |= ME4000_AI_LIST_RANGE_BIPOLAR_2_5; + break; + case 3: + entry |= ME4000_AI_LIST_RANGE_BIPOLAR_10; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Invalid range specified\n", + dev->minor); + return -EINVAL; + } + + switch (aref) { + case AREF_GROUND: + case AREF_COMMON: + if (chan >= thisboard->ai.count) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Analog input is not available\n", + dev->minor); + return -EINVAL; + } + entry |= ME4000_AI_LIST_INPUT_SINGLE_ENDED | chan; + break; + + case AREF_DIFF: + if (rang == 0 || rang == 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Range must be bipolar when aref = diff\n", + dev->minor); + return -EINVAL; + } + + if (chan >= thisboard->ai.diff_count) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Analog input is not available\n", + dev->minor); + return -EINVAL; + } + entry |= ME4000_AI_LIST_INPUT_DIFFERENTIAL | chan; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Invalid aref specified\n", + dev->minor); + return -EINVAL; + } + + entry |= ME4000_AI_LIST_LAST_ENTRY; + + /* Clear channel list, data fifo and both stop bits */ + tmp = me4000_inl(dev, info->ai_context.ctrl_reg); + tmp &= ~(ME4000_AI_CTRL_BIT_CHANNEL_FIFO | + ME4000_AI_CTRL_BIT_DATA_FIFO | + ME4000_AI_CTRL_BIT_STOP | ME4000_AI_CTRL_BIT_IMMEDIATE_STOP); + me4000_outl(dev, tmp, info->ai_context.ctrl_reg); + + /* Set the acquisition mode to single */ + tmp &= ~(ME4000_AI_CTRL_BIT_MODE_0 | ME4000_AI_CTRL_BIT_MODE_1 | + ME4000_AI_CTRL_BIT_MODE_2); + me4000_outl(dev, tmp, info->ai_context.ctrl_reg); + + /* Enable channel list and data fifo */ + tmp |= ME4000_AI_CTRL_BIT_CHANNEL_FIFO | ME4000_AI_CTRL_BIT_DATA_FIFO; + me4000_outl(dev, tmp, info->ai_context.ctrl_reg); + + /* Generate channel list entry */ + me4000_outl(dev, entry, info->ai_context.channel_list_reg); + + /* Set the timer to maximum sample rate */ + me4000_outl(dev, ME4000_AI_MIN_TICKS, info->ai_context.chan_timer_reg); + me4000_outl(dev, ME4000_AI_MIN_TICKS, + info->ai_context.chan_pre_timer_reg); + + /* Start conversion by dummy read */ + me4000_inl(dev, info->ai_context.start_reg); + + /* Wait until ready */ + udelay(10); + if (!(me4000_inl(dev, info->ai_context. + status_reg) & ME4000_AI_STATUS_BIT_EF_DATA)) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_insn_read(): Value not available after wait\n", + dev->minor); + return -EIO; + } + + /* Read value from data fifo */ + lval = me4000_inl(dev, info->ai_context.data_reg) & 0xFFFF; + data[0] = lval ^ 0x8000; + + return 1; +} + +static int me4000_ai_cancel(comedi_device * dev, comedi_subdevice * s) +{ + unsigned long tmp; + + CALL_PDEBUG("In me4000_ai_cancel()\n"); + + /* Stop any running conversion */ + tmp = me4000_inl(dev, info->ai_context.ctrl_reg); + tmp &= ~(ME4000_AI_CTRL_BIT_STOP | ME4000_AI_CTRL_BIT_IMMEDIATE_STOP); + me4000_outl(dev, tmp, info->ai_context.ctrl_reg); + + /* Clear the control register */ + me4000_outl(dev, 0x0, info->ai_context.ctrl_reg); + + return 0; +} + +static int ai_check_chanlist(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd) +{ + int aref; + int i; + + CALL_PDEBUG("In ai_check_chanlist()\n"); + + /* Check whether a channel list is available */ + if (!cmd->chanlist_len) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): No channel list available\n", + dev->minor); + return -EINVAL; + } + + /* Check the channel list size */ + if (cmd->chanlist_len > ME4000_AI_CHANNEL_LIST_COUNT) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): Channel list is to large\n", + dev->minor); + return -EINVAL; + } + + /* Check the pointer */ + if (!cmd->chanlist) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): NULL pointer to channel list\n", + dev->minor); + return -EFAULT; + } + + /* Check whether aref is equal for all entries */ + aref = CR_AREF(cmd->chanlist[0]); + for (i = 0; i < cmd->chanlist_len; i++) { + if (CR_AREF(cmd->chanlist[i]) != aref) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): Mode is not equal for all entries\n", + dev->minor); + return -EINVAL; + } + } + + /* Check whether channels are available for this ending */ + if (aref == SDF_DIFF) { + for (i = 0; i < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i]) >= + thisboard->ai.diff_count) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): Channel number to high\n", + dev->minor); + return -EINVAL; + } + } + } else { + for (i = 0; i < cmd->chanlist_len; i++) { + if (CR_CHAN(cmd->chanlist[i]) >= thisboard->ai.count) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): Channel number to high\n", + dev->minor); + return -EINVAL; + } + } + } + + /* Check if bipolar is set for all entries when in differential mode */ + if (aref == SDF_DIFF) { + for (i = 0; i < cmd->chanlist_len; i++) { + if (CR_RANGE(cmd->chanlist[i]) != 1 && + CR_RANGE(cmd->chanlist[i]) != 2) { + printk(KERN_ERR + "comedi%d: me4000: ai_check_chanlist(): Bipolar is not selected in differential mode\n", + dev->minor); + return -EINVAL; + } + } + } + + return 0; +} + +static int ai_round_cmd_args(comedi_device * dev, + comedi_subdevice * s, + comedi_cmd * cmd, + unsigned int *init_ticks, + unsigned int *scan_ticks, unsigned int *chan_ticks) +{ + + int rest; + + CALL_PDEBUG("In ai_round_cmd_args()\n"); + + *init_ticks = 0; + *scan_ticks = 0; + *chan_ticks = 0; + + PDEBUG("ai_round_cmd_arg(): start_arg = %d\n", cmd->start_arg); + PDEBUG("ai_round_cmd_arg(): scan_begin_arg = %d\n", + cmd->scan_begin_arg); + PDEBUG("ai_round_cmd_arg(): convert_arg = %d\n", cmd->convert_arg); + + if (cmd->start_arg) { + *init_ticks = (cmd->start_arg * 33) / 1000; + rest = (cmd->start_arg * 33) % 1000; + + if (cmd->flags & TRIG_ROUND_NEAREST) { + if (rest > 33) { + (*init_ticks)++; + } + } else if (cmd->flags & TRIG_ROUND_UP) { + if (rest) + (*init_ticks)++; + } + } + + if (cmd->scan_begin_arg) { + *scan_ticks = (cmd->scan_begin_arg * 33) / 1000; + rest = (cmd->scan_begin_arg * 33) % 1000; + + if (cmd->flags & TRIG_ROUND_NEAREST) { + if (rest > 33) { + (*scan_ticks)++; + } + } else if (cmd->flags & TRIG_ROUND_UP) { + if (rest) + (*scan_ticks)++; + } + } + + if (cmd->convert_arg) { + *chan_ticks = (cmd->convert_arg * 33) / 1000; + rest = (cmd->convert_arg * 33) % 1000; + + if (cmd->flags & TRIG_ROUND_NEAREST) { + if (rest > 33) { + (*chan_ticks)++; + } + } else if (cmd->flags & TRIG_ROUND_UP) { + if (rest) + (*chan_ticks)++; + } + } + + PDEBUG("ai_round_cmd_args(): init_ticks = %d\n", *init_ticks); + PDEBUG("ai_round_cmd_args(): scan_ticks = %d\n", *scan_ticks); + PDEBUG("ai_round_cmd_args(): chan_ticks = %d\n", *chan_ticks); + + return 0; +} + +static void ai_write_timer(comedi_device * dev, + unsigned int init_ticks, + unsigned int scan_ticks, unsigned int chan_ticks) +{ + + CALL_PDEBUG("In ai_write_timer()\n"); + + me4000_outl(dev, init_ticks - 1, + info->ai_context.scan_pre_timer_low_reg); + me4000_outl(dev, 0x0, info->ai_context.scan_pre_timer_high_reg); + + if (scan_ticks) { + me4000_outl(dev, scan_ticks - 1, + info->ai_context.scan_timer_low_reg); + me4000_outl(dev, 0x0, info->ai_context.scan_timer_high_reg); + } + + me4000_outl(dev, chan_ticks - 1, info->ai_context.chan_pre_timer_reg); + me4000_outl(dev, chan_ticks - 1, info->ai_context.chan_timer_reg); +} + +static int ai_prepare(comedi_device * dev, + comedi_subdevice * s, + comedi_cmd * cmd, + unsigned int init_ticks, + unsigned int scan_ticks, unsigned int chan_ticks) +{ + + unsigned long tmp = 0; + + CALL_PDEBUG("In ai_prepare()\n"); + + /* Write timer arguments */ + ai_write_timer(dev, init_ticks, scan_ticks, chan_ticks); + + /* Reset control register */ + me4000_outl(dev, tmp, info->ai_context.ctrl_reg); + + /* Start sources */ + if ((cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_TIMER && + cmd->convert_src == TRIG_TIMER) || + (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_FOLLOW && + cmd->convert_src == TRIG_TIMER)) { + tmp = ME4000_AI_CTRL_BIT_MODE_1 | + ME4000_AI_CTRL_BIT_CHANNEL_FIFO | + ME4000_AI_CTRL_BIT_DATA_FIFO; + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_EXT && + cmd->convert_src == TRIG_TIMER) { + tmp = ME4000_AI_CTRL_BIT_MODE_2 | + ME4000_AI_CTRL_BIT_CHANNEL_FIFO | + ME4000_AI_CTRL_BIT_DATA_FIFO; + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_EXT && + cmd->convert_src == TRIG_EXT) { + tmp = ME4000_AI_CTRL_BIT_MODE_0 | + ME4000_AI_CTRL_BIT_MODE_1 | + ME4000_AI_CTRL_BIT_CHANNEL_FIFO | + ME4000_AI_CTRL_BIT_DATA_FIFO; + } else { + tmp = ME4000_AI_CTRL_BIT_MODE_0 | + ME4000_AI_CTRL_BIT_CHANNEL_FIFO | + ME4000_AI_CTRL_BIT_DATA_FIFO; + } + + /* Stop triggers */ + if (cmd->stop_src == TRIG_COUNT) { + me4000_outl(dev, cmd->chanlist_len * cmd->stop_arg, + info->ai_context.sample_counter_reg); + tmp |= ME4000_AI_CTRL_BIT_HF_IRQ | ME4000_AI_CTRL_BIT_SC_IRQ; + } else if (cmd->stop_src == TRIG_NONE && + cmd->scan_end_src == TRIG_COUNT) { + me4000_outl(dev, cmd->scan_end_arg, + info->ai_context.sample_counter_reg); + tmp |= ME4000_AI_CTRL_BIT_HF_IRQ | ME4000_AI_CTRL_BIT_SC_IRQ; + } else { + tmp |= ME4000_AI_CTRL_BIT_HF_IRQ; + } + + /* Write the setup to the control register */ + me4000_outl(dev, tmp, info->ai_context.ctrl_reg); + + /* Write the channel list */ + ai_write_chanlist(dev, s, cmd); + + return 0; +} + +static int ai_write_chanlist(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd) +{ + unsigned int entry; + unsigned int chan; + unsigned int rang; + unsigned int aref; + int i; + + CALL_PDEBUG("In ai_write_chanlist()\n"); + + for (i = 0; i < cmd->chanlist_len; i++) { + chan = CR_CHAN(cmd->chanlist[i]); + rang = CR_RANGE(cmd->chanlist[i]); + aref = CR_AREF(cmd->chanlist[i]); + + entry = chan; + + if (rang == 0) { + entry |= ME4000_AI_LIST_RANGE_UNIPOLAR_2_5; + } else if (rang == 1) { + entry |= ME4000_AI_LIST_RANGE_UNIPOLAR_10; + } else if (rang == 2) { + entry |= ME4000_AI_LIST_RANGE_BIPOLAR_2_5; + } else { + entry |= ME4000_AI_LIST_RANGE_BIPOLAR_10; + } + + if (aref == SDF_DIFF) { + entry |= ME4000_AI_LIST_INPUT_DIFFERENTIAL; + } else { + entry |= ME4000_AI_LIST_INPUT_SINGLE_ENDED; + } + + me4000_outl(dev, entry, info->ai_context.channel_list_reg); + } + + return 0; +} + +static int me4000_ai_do_cmd(comedi_device * dev, comedi_subdevice * s) +{ + int err; + unsigned int init_ticks = 0; + unsigned int scan_ticks = 0; + unsigned int chan_ticks = 0; + comedi_cmd *cmd = &s->async->cmd; + + CALL_PDEBUG("In me4000_ai_do_cmd()\n"); + + /* Reset the analog input */ + err = me4000_ai_cancel(dev, s); + if (err) + return err; + + /* Round the timer arguments */ + err = ai_round_cmd_args(dev, + s, cmd, &init_ticks, &scan_ticks, &chan_ticks); + if (err) + return err; + + /* Prepare the AI for acquisition */ + err = ai_prepare(dev, s, cmd, init_ticks, scan_ticks, chan_ticks); + if (err) + return err; + + /* Start acquistion by dummy read */ + me4000_inl(dev, info->ai_context.start_reg); + + return 0; +} + +/* + * me4000_ai_do_cmd_test(): + * + * The demo cmd.c in ./comedilib/demo specifies 6 return values: + * - success + * - invalid source + * - source conflict + * - invalid argument + * - argument conflict + * - invalid chanlist + * So I tried to adopt this scheme. + */ +static int me4000_ai_do_cmd_test(comedi_device * dev, + comedi_subdevice * s, comedi_cmd * cmd) +{ + + unsigned int init_ticks; + unsigned int chan_ticks; + unsigned int scan_ticks; + int err = 0; + + CALL_PDEBUG("In me4000_ai_do_cmd_test()\n"); + + PDEBUG("me4000_ai_do_cmd_test(): subdev = %d\n", cmd->subdev); + PDEBUG("me4000_ai_do_cmd_test(): flags = %08X\n", cmd->flags); + PDEBUG("me4000_ai_do_cmd_test(): start_src = %08X\n", + cmd->start_src); + PDEBUG("me4000_ai_do_cmd_test(): start_arg = %d\n", + cmd->start_arg); + PDEBUG("me4000_ai_do_cmd_test(): scan_begin_src = %08X\n", + cmd->scan_begin_src); + PDEBUG("me4000_ai_do_cmd_test(): scan_begin_arg = %d\n", + cmd->scan_begin_arg); + PDEBUG("me4000_ai_do_cmd_test(): convert_src = %08X\n", + cmd->convert_src); + PDEBUG("me4000_ai_do_cmd_test(): convert_arg = %d\n", + cmd->convert_arg); + PDEBUG("me4000_ai_do_cmd_test(): scan_end_src = %08X\n", + cmd->scan_end_src); + PDEBUG("me4000_ai_do_cmd_test(): scan_end_arg = %d\n", + cmd->scan_end_arg); + PDEBUG("me4000_ai_do_cmd_test(): stop_src = %08X\n", + cmd->stop_src); + PDEBUG("me4000_ai_do_cmd_test(): stop_arg = %d\n", cmd->stop_arg); + PDEBUG("me4000_ai_do_cmd_test(): chanlist = %d\n", + (unsigned int)cmd->chanlist); + PDEBUG("me4000_ai_do_cmd_test(): chanlist_len = %d\n", + cmd->chanlist_len); + + /* Only rounding flags are implemented */ + cmd->flags &= TRIG_ROUND_NEAREST | TRIG_ROUND_UP | TRIG_ROUND_DOWN; + + /* Round the timer arguments */ + ai_round_cmd_args(dev, s, cmd, &init_ticks, &scan_ticks, &chan_ticks); + + /* + * Stage 1. Check if the trigger sources are generally valid. + */ + switch (cmd->start_src) { + case TRIG_NOW: + case TRIG_EXT: + break; + case TRIG_ANY: + cmd->start_src &= TRIG_NOW | TRIG_EXT; + err++; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start source\n", + dev->minor); + cmd->start_src = TRIG_NOW; + err++; + } + switch (cmd->scan_begin_src) { + case TRIG_FOLLOW: + case TRIG_TIMER: + case TRIG_EXT: + break; + case TRIG_ANY: + cmd->scan_begin_src &= TRIG_FOLLOW | TRIG_TIMER | TRIG_EXT; + err++; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan begin source\n", + dev->minor); + cmd->scan_begin_src = TRIG_FOLLOW; + err++; + } + switch (cmd->convert_src) { + case TRIG_TIMER: + case TRIG_EXT: + break; + case TRIG_ANY: + cmd->convert_src &= TRIG_TIMER | TRIG_EXT; + err++; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert source\n", + dev->minor); + cmd->convert_src = TRIG_TIMER; + err++; + } + switch (cmd->scan_end_src) { + case TRIG_NONE: + case TRIG_COUNT: + break; + case TRIG_ANY: + cmd->scan_end_src &= TRIG_NONE | TRIG_COUNT; + err++; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end source\n", + dev->minor); + cmd->scan_end_src = TRIG_NONE; + err++; + } + switch (cmd->stop_src) { + case TRIG_NONE: + case TRIG_COUNT: + break; + case TRIG_ANY: + cmd->stop_src &= TRIG_NONE | TRIG_COUNT; + err++; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid stop source\n", + dev->minor); + cmd->stop_src = TRIG_NONE; + err++; + } + if (err) { + return 1; + } + + /* + * Stage 2. Check for trigger source conflicts. + */ + if (cmd->start_src == TRIG_NOW && + cmd->scan_begin_src == TRIG_TIMER && + cmd->convert_src == TRIG_TIMER) { + } else if (cmd->start_src == TRIG_NOW && + cmd->scan_begin_src == TRIG_FOLLOW && + cmd->convert_src == TRIG_TIMER) { + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_TIMER && + cmd->convert_src == TRIG_TIMER) { + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_FOLLOW && + cmd->convert_src == TRIG_TIMER) { + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_EXT && + cmd->convert_src == TRIG_TIMER) { + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_EXT && + cmd->convert_src == TRIG_EXT) { + } else { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start trigger combination\n", + dev->minor); + cmd->start_src = TRIG_NOW; + cmd->scan_begin_src = TRIG_FOLLOW; + cmd->convert_src = TRIG_TIMER; + err++; + } + + if (cmd->stop_src == TRIG_NONE && cmd->scan_end_src == TRIG_NONE) { + } else if (cmd->stop_src == TRIG_COUNT && + cmd->scan_end_src == TRIG_NONE) { + } else if (cmd->stop_src == TRIG_NONE && + cmd->scan_end_src == TRIG_COUNT) { + } else if (cmd->stop_src == TRIG_COUNT && + cmd->scan_end_src == TRIG_COUNT) { + } else { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid stop trigger combination\n", + dev->minor); + cmd->stop_src = TRIG_NONE; + cmd->scan_end_src = TRIG_NONE; + err++; + } + if (err) { + return 2; + } + + /* + * Stage 3. Check if arguments are generally valid. + */ + if (cmd->chanlist_len < 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): No channel list\n", + dev->minor); + cmd->chanlist_len = 1; + err++; + } + if (init_ticks < 66) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Start arg to low\n", + dev->minor); + cmd->start_arg = 2000; + err++; + } + if (scan_ticks && scan_ticks < 67) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Scan begin arg to low\n", + dev->minor); + cmd->scan_begin_arg = 2031; + err++; + } + if (chan_ticks < 66) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Convert arg to low\n", + dev->minor); + cmd->convert_arg = 2000; + err++; + } + if (err) { + return 3; + } + + /* + * Stage 4. Check for argument conflicts. + */ + if (cmd->start_src == TRIG_NOW && + cmd->scan_begin_src == TRIG_TIMER && + cmd->convert_src == TRIG_TIMER) { + + /* Check timer arguments */ + if (init_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n", + dev->minor); + cmd->start_arg = 2000; // 66 ticks at least + err++; + } + if (chan_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n", + dev->minor); + cmd->convert_arg = 2000; // 66 ticks at least + err++; + } + if (scan_ticks <= cmd->chanlist_len * chan_ticks) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end arg\n", + dev->minor); + cmd->scan_end_arg = 2000 * cmd->chanlist_len + 31; // At least one tick more + err++; + } + } else if (cmd->start_src == TRIG_NOW && + cmd->scan_begin_src == TRIG_FOLLOW && + cmd->convert_src == TRIG_TIMER) { + + /* Check timer arguments */ + if (init_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n", + dev->minor); + cmd->start_arg = 2000; // 66 ticks at least + err++; + } + if (chan_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n", + dev->minor); + cmd->convert_arg = 2000; // 66 ticks at least + err++; + } + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_TIMER && + cmd->convert_src == TRIG_TIMER) { + + /* Check timer arguments */ + if (init_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n", + dev->minor); + cmd->start_arg = 2000; // 66 ticks at least + err++; + } + if (chan_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n", + dev->minor); + cmd->convert_arg = 2000; // 66 ticks at least + err++; + } + if (scan_ticks <= cmd->chanlist_len * chan_ticks) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end arg\n", + dev->minor); + cmd->scan_end_arg = 2000 * cmd->chanlist_len + 31; // At least one tick more + err++; + } + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_FOLLOW && + cmd->convert_src == TRIG_TIMER) { + + /* Check timer arguments */ + if (init_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n", + dev->minor); + cmd->start_arg = 2000; // 66 ticks at least + err++; + } + if (chan_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n", + dev->minor); + cmd->convert_arg = 2000; // 66 ticks at least + err++; + } + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_EXT && + cmd->convert_src == TRIG_TIMER) { + + /* Check timer arguments */ + if (init_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n", + dev->minor); + cmd->start_arg = 2000; // 66 ticks at least + err++; + } + if (chan_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid convert arg\n", + dev->minor); + cmd->convert_arg = 2000; // 66 ticks at least + err++; + } + } else if (cmd->start_src == TRIG_EXT && + cmd->scan_begin_src == TRIG_EXT && + cmd->convert_src == TRIG_EXT) { + + /* Check timer arguments */ + if (init_ticks < ME4000_AI_MIN_TICKS) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid start arg\n", + dev->minor); + cmd->start_arg = 2000; // 66 ticks at least + err++; + } + } + if (cmd->stop_src == TRIG_COUNT) { + if (cmd->stop_arg == 0) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid stop arg\n", + dev->minor); + cmd->stop_arg = 1; + err++; + } + } + if (cmd->scan_end_src == TRIG_COUNT) { + if (cmd->scan_end_arg == 0) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_do_cmd_test(): Invalid scan end arg\n", + dev->minor); + cmd->scan_end_arg = 1; + err++; + } + } + if (err) { + return 4; + } + + /* + * Stage 5. Check the channel list. + */ + if (ai_check_chanlist(dev, s, cmd)) + return 5; + + return 0; +} + +static irqreturn_t me4000_ai_isr(int irq, void *dev_id PT_REGS_ARG) +{ + unsigned int tmp; + comedi_device *dev = dev_id; + comedi_subdevice *s = dev->subdevices; + me4000_ai_context_t *ai_context = &info->ai_context; + int i; + int c = 0; + long lval; + + ISR_PDEBUG("me4000_ai_isr() is executed\n"); + + if (!dev->attached) { + ISR_PDEBUG("me4000_ai_isr() premature interrupt\n"); + return IRQ_NONE; + } + + /* Reset all events */ + s->async->events = 0; + + /* Check if irq number is right */ + if (irq != ai_context->irq) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_isr(): Incorrect interrupt num: %d\n", + dev->minor, irq); + return IRQ_HANDLED; + } + + if (me4000_inl(dev, + ai_context-> + irq_status_reg) & ME4000_IRQ_STATUS_BIT_AI_HF) { + ISR_PDEBUG + ("me4000_ai_isr(): Fifo half full interrupt occured\n"); + + /* Read status register to find out what happened */ + tmp = me4000_inl(dev, ai_context->ctrl_reg); + + if (!(tmp & ME4000_AI_STATUS_BIT_FF_DATA) && + !(tmp & ME4000_AI_STATUS_BIT_HF_DATA) && + (tmp & ME4000_AI_STATUS_BIT_EF_DATA)) { + ISR_PDEBUG("me4000_ai_isr(): Fifo full\n"); + c = ME4000_AI_FIFO_COUNT; + + /* FIFO overflow, so stop conversion and disable all interrupts */ + tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP; + tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ | + ME4000_AI_CTRL_BIT_SC_IRQ); + me4000_outl(dev, tmp, ai_context->ctrl_reg); + + s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; + + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_isr(): FIFO overflow\n", + dev->minor); + } else if ((tmp & ME4000_AI_STATUS_BIT_FF_DATA) + && !(tmp & ME4000_AI_STATUS_BIT_HF_DATA) + && (tmp & ME4000_AI_STATUS_BIT_EF_DATA)) { + ISR_PDEBUG("me4000_ai_isr(): Fifo half full\n"); + + s->async->events |= COMEDI_CB_BLOCK; + + c = ME4000_AI_FIFO_COUNT / 2; + } else { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_isr(): Can't determine state of fifo\n", + dev->minor); + c = 0; + + /* Undefined state, so stop conversion and disable all interrupts */ + tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP; + tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ | + ME4000_AI_CTRL_BIT_SC_IRQ); + me4000_outl(dev, tmp, ai_context->ctrl_reg); + + s->async->events |= COMEDI_CB_ERROR | COMEDI_CB_EOA; + + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_isr(): Undefined FIFO state\n", + dev->minor); + } + + ISR_PDEBUG("me4000_ai_isr(): Try to read %d values\n", c); + + for (i = 0; i < c; i++) { + /* Read value from data fifo */ + lval = inl(ai_context->data_reg) & 0xFFFF; + lval ^= 0x8000; + + if (!comedi_buf_put(s->async, lval)) { + /* Buffer overflow, so stop conversion and disable all interrupts */ + tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP; + tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ | + ME4000_AI_CTRL_BIT_SC_IRQ); + me4000_outl(dev, tmp, ai_context->ctrl_reg); + + s->async->events |= COMEDI_CB_OVERFLOW; + + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_isr(): Buffer overflow\n", + dev->minor); + + break; + } + } + + /* Work is done, so reset the interrupt */ + ISR_PDEBUG("me4000_ai_isr(): Reset fifo half full interrupt\n"); + tmp |= ME4000_AI_CTRL_BIT_HF_IRQ_RESET; + me4000_outl(dev, tmp, ai_context->ctrl_reg); + tmp &= ~ME4000_AI_CTRL_BIT_HF_IRQ_RESET; + me4000_outl(dev, tmp, ai_context->ctrl_reg); + } + + if (me4000_inl(dev, + ai_context-> + irq_status_reg) & ME4000_IRQ_STATUS_BIT_SC) { + ISR_PDEBUG + ("me4000_ai_isr(): Sample counter interrupt occured\n"); + + s->async->events |= COMEDI_CB_BLOCK | COMEDI_CB_EOA; + + /* Acquisition is complete, so stop conversion and disable all interrupts */ + tmp = me4000_inl(dev, ai_context->ctrl_reg); + tmp |= ME4000_AI_CTRL_BIT_IMMEDIATE_STOP; + tmp &= ~(ME4000_AI_CTRL_BIT_HF_IRQ | ME4000_AI_CTRL_BIT_SC_IRQ); + me4000_outl(dev, tmp, ai_context->ctrl_reg); + + /* Poll data until fifo empty */ + while (inl(ai_context->ctrl_reg) & ME4000_AI_STATUS_BIT_EF_DATA) { + /* Read value from data fifo */ + lval = inl(ai_context->data_reg) & 0xFFFF; + lval ^= 0x8000; + + if (!comedi_buf_put(s->async, lval)) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ai_isr(): Buffer overflow\n", + dev->minor); + s->async->events |= COMEDI_CB_OVERFLOW; + break; + } + } + + /* Work is done, so reset the interrupt */ + ISR_PDEBUG + ("me4000_ai_isr(): Reset interrupt from sample counter\n"); + tmp |= ME4000_AI_CTRL_BIT_SC_IRQ_RESET; + me4000_outl(dev, tmp, ai_context->ctrl_reg); + tmp &= ~ME4000_AI_CTRL_BIT_SC_IRQ_RESET; + me4000_outl(dev, tmp, ai_context->ctrl_reg); + } + + ISR_PDEBUG("me4000_ai_isr(): Events = 0x%X\n", s->async->events); + + if (s->async->events) + comedi_event(dev, s); + + return IRQ_HANDLED; +} + +/*============================================================================= + Analog output section + ===========================================================================*/ + +static int me4000_ao_insn_write(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + int chan = CR_CHAN(insn->chanspec); + int rang = CR_RANGE(insn->chanspec); + int aref = CR_AREF(insn->chanspec); + unsigned long tmp; + + CALL_PDEBUG("In me4000_ao_insn_write()\n"); + + if (insn->n == 0) { + return 0; + } else if (insn->n > 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ao_insn_write(): Invalid instruction length %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + if (chan >= thisboard->ao.count) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ao_insn_write(): Invalid channel %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + if (rang != 0) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ao_insn_write(): Invalid range %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + if (aref != AREF_GROUND && aref != AREF_COMMON) { + printk(KERN_ERR + "comedi%d: me4000: me4000_ao_insn_write(): Invalid aref %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + /* Stop any running conversion */ + tmp = me4000_inl(dev, info->ao_context[chan].ctrl_reg); + tmp |= ME4000_AO_CTRL_BIT_IMMEDIATE_STOP; + me4000_outl(dev, tmp, info->ao_context[chan].ctrl_reg); + + /* Clear control register and set to single mode */ + me4000_outl(dev, 0x0, info->ao_context[chan].ctrl_reg); + + /* Write data value */ + me4000_outl(dev, data[0], info->ao_context[chan].single_reg); + + /* Store in the mirror */ + info->ao_context[chan].mirror = data[0]; + + return 1; +} + +static int me4000_ao_insn_read(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + int chan = CR_CHAN(insn->chanspec); + + if (insn->n == 0) { + return 0; + } else if (insn->n > 1) { + printk("comedi%d: me4000: me4000_ao_insn_read(): Invalid instruction length\n", dev->minor); + return -EINVAL; + } + + data[0] = info->ao_context[chan].mirror; + + return 1; +} + +/*============================================================================= + Digital I/O section + ===========================================================================*/ + +static int me4000_dio_insn_bits(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + CALL_PDEBUG("In me4000_dio_insn_bits()\n"); + + /* Length of data must be 2 (mask and new data, see below) */ + if (insn->n == 0) { + return 0; + } + if (insn->n != 2) { + printk("comedi%d: me4000: me4000_dio_insn_bits(): Invalid instruction length\n", dev->minor); + return -EINVAL; + } + + /* + * The insn data consists of a mask in data[0] and the new data + * in data[1]. The mask defines which bits we are concerning about. + * The new data must be anded with the mask. + * Each channel corresponds to a bit. + */ + if (data[0]) { + /* Check if requested ports are configured for output */ + if ((s->io_bits & data[0]) != data[0]) + return -EIO; + + s->state &= ~data[0]; + s->state |= data[0] & data[1]; + + /* Write out the new digital output lines */ + me4000_outl(dev, (s->state >> 0) & 0xFF, + info->dio_context.port_0_reg); + me4000_outl(dev, (s->state >> 8) & 0xFF, + info->dio_context.port_1_reg); + me4000_outl(dev, (s->state >> 16) & 0xFF, + info->dio_context.port_2_reg); + me4000_outl(dev, (s->state >> 24) & 0xFF, + info->dio_context.port_3_reg); + } + + /* On return, data[1] contains the value of + the digital input and output lines. */ + data[1] = + ((me4000_inl(dev, info->dio_context.port_0_reg) & 0xFF) << 0) | + ((me4000_inl(dev, info->dio_context.port_1_reg) & 0xFF) << 8) | + ((me4000_inl(dev, info->dio_context.port_2_reg) & 0xFF) << 16) | + ((me4000_inl(dev, info->dio_context.port_3_reg) & 0xFF) << 24); + + return 2; +} + +static int me4000_dio_insn_config(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + unsigned long tmp; + int chan = CR_CHAN(insn->chanspec); + + CALL_PDEBUG("In me4000_dio_insn_config()\n"); + + if (data[0] == INSN_CONFIG_DIO_QUERY) { + data[1] = + (s-> + io_bits & (1 << chan)) ? COMEDI_OUTPUT : COMEDI_INPUT; + return insn->n; + } + + /* + * The input or output configuration of each digital line is + * configured by a special insn_config instruction. chanspec + * contains the channel to be changed, and data[0] contains the + * value COMEDI_INPUT or COMEDI_OUTPUT. + * On the ME-4000 it is only possible to switch port wise (8 bit) + */ + + tmp = me4000_inl(dev, info->dio_context.ctrl_reg); + + if (data[0] == COMEDI_OUTPUT) { + if (chan < 8) { + s->io_bits |= 0xFF; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_0 | + ME4000_DIO_CTRL_BIT_MODE_1); + tmp |= ME4000_DIO_CTRL_BIT_MODE_0; + } else if (chan < 16) { + /* + * Chech for optoisolated ME-4000 version. If one the first + * port is a fixed output port and the second is a fixed input port. + */ + if (!me4000_inl(dev, info->dio_context.dir_reg)) + return -ENODEV; + + s->io_bits |= 0xFF00; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_2 | + ME4000_DIO_CTRL_BIT_MODE_3); + tmp |= ME4000_DIO_CTRL_BIT_MODE_2; + } else if (chan < 24) { + s->io_bits |= 0xFF0000; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_4 | + ME4000_DIO_CTRL_BIT_MODE_5); + tmp |= ME4000_DIO_CTRL_BIT_MODE_4; + } else if (chan < 32) { + s->io_bits |= 0xFF000000; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_6 | + ME4000_DIO_CTRL_BIT_MODE_7); + tmp |= ME4000_DIO_CTRL_BIT_MODE_6; + } else { + return -EINVAL; + } + } else { + if (chan < 8) { + /* + * Chech for optoisolated ME-4000 version. If one the first + * port is a fixed output port and the second is a fixed input port. + */ + if (!me4000_inl(dev, info->dio_context.dir_reg)) + return -ENODEV; + + s->io_bits &= ~0xFF; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_0 | + ME4000_DIO_CTRL_BIT_MODE_1); + } else if (chan < 16) { + s->io_bits &= ~0xFF00; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_2 | + ME4000_DIO_CTRL_BIT_MODE_3); + } else if (chan < 24) { + s->io_bits &= ~0xFF0000; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_4 | + ME4000_DIO_CTRL_BIT_MODE_5); + } else if (chan < 32) { + s->io_bits &= ~0xFF000000; + tmp &= ~(ME4000_DIO_CTRL_BIT_MODE_6 | + ME4000_DIO_CTRL_BIT_MODE_7); + } else { + return -EINVAL; + } + } + + me4000_outl(dev, tmp, info->dio_context.ctrl_reg); + + return 1; +} + +/*============================================================================= + Counter section + ===========================================================================*/ + +static int cnt_reset(comedi_device * dev, unsigned int channel) +{ + + CALL_PDEBUG("In cnt_reset()\n"); + + switch (channel) { + case 0: + me4000_outb(dev, 0x30, info->cnt_context.ctrl_reg); + me4000_outb(dev, 0x00, info->cnt_context.counter_0_reg); + me4000_outb(dev, 0x00, info->cnt_context.counter_0_reg); + break; + case 1: + me4000_outb(dev, 0x70, info->cnt_context.ctrl_reg); + me4000_outb(dev, 0x00, info->cnt_context.counter_1_reg); + me4000_outb(dev, 0x00, info->cnt_context.counter_1_reg); + break; + case 2: + me4000_outb(dev, 0xB0, info->cnt_context.ctrl_reg); + me4000_outb(dev, 0x00, info->cnt_context.counter_2_reg); + me4000_outb(dev, 0x00, info->cnt_context.counter_2_reg); + break; + default: + printk(KERN_ERR + "comedi%d: me4000: cnt_reset(): Invalid channel\n", + dev->minor); + return -EINVAL; + } + + return 0; +} + +static int cnt_config(comedi_device * dev, unsigned int channel, + unsigned int mode) +{ + int tmp = 0; + + CALL_PDEBUG("In cnt_config()\n"); + + switch (channel) { + case 0: + tmp |= ME4000_CNT_COUNTER_0; + break; + case 1: + tmp |= ME4000_CNT_COUNTER_1; + break; + case 2: + tmp |= ME4000_CNT_COUNTER_2; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: cnt_config(): Invalid channel\n", + dev->minor); + return -EINVAL; + } + + switch (mode) { + case 0: + tmp |= ME4000_CNT_MODE_0; + break; + case 1: + tmp |= ME4000_CNT_MODE_1; + break; + case 2: + tmp |= ME4000_CNT_MODE_2; + break; + case 3: + tmp |= ME4000_CNT_MODE_3; + break; + case 4: + tmp |= ME4000_CNT_MODE_4; + break; + case 5: + tmp |= ME4000_CNT_MODE_5; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: cnt_config(): Invalid counter mode\n", + dev->minor); + return -EINVAL; + } + + /* Write the control word */ + tmp |= 0x30; + me4000_outb(dev, tmp, info->cnt_context.ctrl_reg); + + return 0; +} + +static int me4000_cnt_insn_config(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + int err; + + CALL_PDEBUG("In me4000_cnt_insn_config()\n"); + + switch (data[0]) { + case GPCT_RESET: + if (insn->n != 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_config(): Invalid instruction length%d\n", + dev->minor, insn->n); + return -EINVAL; + } + + err = cnt_reset(dev, insn->chanspec); + if (err) + return err; + break; + case GPCT_SET_OPERATION: + if (insn->n != 2) { + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_config(): Invalid instruction length%d\n", + dev->minor, insn->n); + return -EINVAL; + } + + err = cnt_config(dev, insn->chanspec, data[1]); + if (err) + return err; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_config(): Invalid instruction\n", + dev->minor); + return -EINVAL; + } + + return 2; +} + +static int me4000_cnt_insn_read(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + unsigned short tmp; + + CALL_PDEBUG("In me4000_cnt_insn_read()\n"); + + if (insn->n == 0) { + return 0; + } + if (insn->n > 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_read(): Invalid instruction length %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + switch (insn->chanspec) { + case 0: + tmp = me4000_inb(dev, info->cnt_context.counter_0_reg); + data[0] = tmp; + tmp = me4000_inb(dev, info->cnt_context.counter_0_reg); + data[0] |= tmp << 8; + break; + case 1: + tmp = me4000_inb(dev, info->cnt_context.counter_1_reg); + data[0] = tmp; + tmp = me4000_inb(dev, info->cnt_context.counter_1_reg); + data[0] |= tmp << 8; + break; + case 2: + tmp = me4000_inb(dev, info->cnt_context.counter_2_reg); + data[0] = tmp; + tmp = me4000_inb(dev, info->cnt_context.counter_2_reg); + data[0] |= tmp << 8; + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_read(): Invalid channel %d\n", + dev->minor, insn->chanspec); + return -EINVAL; + } + + return 1; +} + +static int me4000_cnt_insn_write(comedi_device * dev, + comedi_subdevice * s, comedi_insn * insn, lsampl_t * data) +{ + + unsigned short tmp; + + CALL_PDEBUG("In me4000_cnt_insn_write()\n"); + + if (insn->n == 0) { + return 0; + } else if (insn->n > 1) { + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_write(): Invalid instruction length %d\n", + dev->minor, insn->n); + return -EINVAL; + } + + switch (insn->chanspec) { + case 0: + tmp = data[0] & 0xFF; + me4000_outb(dev, tmp, info->cnt_context.counter_0_reg); + tmp = (data[0] >> 8) & 0xFF; + me4000_outb(dev, tmp, info->cnt_context.counter_0_reg); + break; + case 1: + tmp = data[0] & 0xFF; + me4000_outb(dev, tmp, info->cnt_context.counter_1_reg); + tmp = (data[0] >> 8) & 0xFF; + me4000_outb(dev, tmp, info->cnt_context.counter_1_reg); + break; + case 2: + tmp = data[0] & 0xFF; + me4000_outb(dev, tmp, info->cnt_context.counter_2_reg); + tmp = (data[0] >> 8) & 0xFF; + me4000_outb(dev, tmp, info->cnt_context.counter_2_reg); + break; + default: + printk(KERN_ERR + "comedi%d: me4000: me4000_cnt_insn_write(): Invalid channel %d\n", + dev->minor, insn->chanspec); + return -EINVAL; + } + + return 1; +} + +COMEDI_PCI_INITCLEANUP(driver_me4000, me4000_pci_table); diff --git a/drivers/staging/comedi/drivers/me4000.h b/drivers/staging/comedi/drivers/me4000.h new file mode 100644 index 000000000000..f12b8873ec3c --- /dev/null +++ b/drivers/staging/comedi/drivers/me4000.h @@ -0,0 +1,446 @@ +/* + me4000.h + Register descriptions and defines for the ME-4000 board family + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1998-9 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef _ME4000_H_ +#define _ME4000_H_ + +/*============================================================================= + Debug section + ===========================================================================*/ + +#undef ME4000_CALL_DEBUG // Debug function entry and exit +#undef ME4000_PORT_DEBUG // Debug port access +#undef ME4000_ISR_DEBUG // Debug the interrupt service routine +#undef ME4000_DEBUG // General purpose debug masseges + +#ifdef ME4000_CALL_DEBUG +#undef CALL_PDEBUG +#define CALL_PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) +#else +# define CALL_PDEBUG(fmt, args...) // no debugging, do nothing +#endif + +#ifdef ME4000_PORT_DEBUG +#undef PORT_PDEBUG +#define PORT_PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) +#else +#define PORT_PDEBUG(fmt, args...) // no debugging, do nothing +#endif + +#ifdef ME4000_ISR_DEBUG +#undef ISR_PDEBUG +#define ISR_PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) +#else +#define ISR_PDEBUG(fmt, args...) // no debugging, do nothing +#endif + +#ifdef ME4000_DEBUG +#undef PDEBUG +#define PDEBUG(fmt, args...) printk(KERN_DEBUG"comedi%d: me4000: " fmt, dev->minor, ##args) +#else +#define PDEBUG(fmt, args...) // no debugging, do nothing +#endif + +/*============================================================================= + PCI vendor and device IDs + ===========================================================================*/ + +#define PCI_VENDOR_ID_MEILHAUS 0x1402 + +#define PCI_DEVICE_ID_MEILHAUS_ME4650 0x4650 // Low Cost version + +#define PCI_DEVICE_ID_MEILHAUS_ME4660 0x4660 // Standard version +#define PCI_DEVICE_ID_MEILHAUS_ME4660I 0x4661 // Isolated version +#define PCI_DEVICE_ID_MEILHAUS_ME4660S 0x4662 // Standard version with Sample and Hold +#define PCI_DEVICE_ID_MEILHAUS_ME4660IS 0x4663 // Isolated version with Sample and Hold + +#define PCI_DEVICE_ID_MEILHAUS_ME4670 0x4670 // Standard version +#define PCI_DEVICE_ID_MEILHAUS_ME4670I 0x4671 // Isolated version +#define PCI_DEVICE_ID_MEILHAUS_ME4670S 0x4672 // Standard version with Sample and Hold +#define PCI_DEVICE_ID_MEILHAUS_ME4670IS 0x4673 // Isolated version with Sample and Hold + +#define PCI_DEVICE_ID_MEILHAUS_ME4680 0x4680 // Standard version +#define PCI_DEVICE_ID_MEILHAUS_ME4680I 0x4681 // Isolated version +#define PCI_DEVICE_ID_MEILHAUS_ME4680S 0x4682 // Standard version with Sample and Hold +#define PCI_DEVICE_ID_MEILHAUS_ME4680IS 0x4683 // Isolated version with Sample and Hold + +/*============================================================================= + ME-4000 base register offsets + ===========================================================================*/ + +#define ME4000_AO_00_CTRL_REG 0x00 // R/W +#define ME4000_AO_00_STATUS_REG 0x04 // R/_ +#define ME4000_AO_00_FIFO_REG 0x08 // _/W +#define ME4000_AO_00_SINGLE_REG 0x0C // R/W +#define ME4000_AO_00_TIMER_REG 0x10 // _/W + +#define ME4000_AO_01_CTRL_REG 0x18 // R/W +#define ME4000_AO_01_STATUS_REG 0x1C // R/_ +#define ME4000_AO_01_FIFO_REG 0x20 // _/W +#define ME4000_AO_01_SINGLE_REG 0x24 // R/W +#define ME4000_AO_01_TIMER_REG 0x28 // _/W + +#define ME4000_AO_02_CTRL_REG 0x30 // R/W +#define ME4000_AO_02_STATUS_REG 0x34 // R/_ +#define ME4000_AO_02_FIFO_REG 0x38 // _/W +#define ME4000_AO_02_SINGLE_REG 0x3C // R/W +#define ME4000_AO_02_TIMER_REG 0x40 // _/W + +#define ME4000_AO_03_CTRL_REG 0x48 // R/W +#define ME4000_AO_03_STATUS_REG 0x4C // R/_ +#define ME4000_AO_03_FIFO_REG 0x50 // _/W +#define ME4000_AO_03_SINGLE_REG 0x54 // R/W +#define ME4000_AO_03_TIMER_REG 0x58 // _/W + +#define ME4000_AI_CTRL_REG 0x74 // _/W +#define ME4000_AI_STATUS_REG 0x74 // R/_ +#define ME4000_AI_CHANNEL_LIST_REG 0x78 // _/W +#define ME4000_AI_DATA_REG 0x7C // R/_ +#define ME4000_AI_CHAN_TIMER_REG 0x80 // _/W +#define ME4000_AI_CHAN_PRE_TIMER_REG 0x84 // _/W +#define ME4000_AI_SCAN_TIMER_LOW_REG 0x88 // _/W +#define ME4000_AI_SCAN_TIMER_HIGH_REG 0x8C // _/W +#define ME4000_AI_SCAN_PRE_TIMER_LOW_REG 0x90 // _/W +#define ME4000_AI_SCAN_PRE_TIMER_HIGH_REG 0x94 // _/W +#define ME4000_AI_START_REG 0x98 // R/_ + +#define ME4000_IRQ_STATUS_REG 0x9C // R/_ + +#define ME4000_DIO_PORT_0_REG 0xA0 // R/W +#define ME4000_DIO_PORT_1_REG 0xA4 // R/W +#define ME4000_DIO_PORT_2_REG 0xA8 // R/W +#define ME4000_DIO_PORT_3_REG 0xAC // R/W +#define ME4000_DIO_DIR_REG 0xB0 // R/W + +#define ME4000_AO_LOADSETREG_XX 0xB4 // R/W + +#define ME4000_DIO_CTRL_REG 0xB8 // R/W + +#define ME4000_AO_DEMUX_ADJUST_REG 0xBC // -/W + +#define ME4000_AI_SAMPLE_COUNTER_REG 0xC0 // _/W + +/*============================================================================= + Value to adjust Demux + ===========================================================================*/ + +#define ME4000_AO_DEMUX_ADJUST_VALUE 0x4C + +/*============================================================================= + Counter base register offsets + ===========================================================================*/ + +#define ME4000_CNT_COUNTER_0_REG 0x00 +#define ME4000_CNT_COUNTER_1_REG 0x01 +#define ME4000_CNT_COUNTER_2_REG 0x02 +#define ME4000_CNT_CTRL_REG 0x03 + +/*============================================================================= + PLX base register offsets + ===========================================================================*/ + +#define PLX_INTCSR 0x4C // Interrupt control and status register +#define PLX_ICR 0x50 // Initialization control register + +/*============================================================================= + Bits for the PLX_ICSR register + ===========================================================================*/ + +#define PLX_INTCSR_LOCAL_INT1_EN 0x01 // If set, local interrupt 1 is enabled (r/w) +#define PLX_INTCSR_LOCAL_INT1_POL 0x02 // If set, local interrupt 1 polarity is active high (r/w) +#define PLX_INTCSR_LOCAL_INT1_STATE 0x04 // If set, local interrupt 1 is active (r/_) +#define PLX_INTCSR_LOCAL_INT2_EN 0x08 // If set, local interrupt 2 is enabled (r/w) +#define PLX_INTCSR_LOCAL_INT2_POL 0x10 // If set, local interrupt 2 polarity is active high (r/w) +#define PLX_INTCSR_LOCAL_INT2_STATE 0x20 // If set, local interrupt 2 is active (r/_) +#define PLX_INTCSR_PCI_INT_EN 0x40 // If set, PCI interrupt is enabled (r/w) +#define PLX_INTCSR_SOFT_INT 0x80 // If set, a software interrupt is generated (r/w) + +/*============================================================================= + Bits for the PLX_ICR register + ===========================================================================*/ + +#define PLX_ICR_BIT_EEPROM_CLOCK_SET 0x01000000 +#define PLX_ICR_BIT_EEPROM_CHIP_SELECT 0x02000000 +#define PLX_ICR_BIT_EEPROM_WRITE 0x04000000 +#define PLX_ICR_BIT_EEPROM_READ 0x08000000 +#define PLX_ICR_BIT_EEPROM_VALID 0x10000000 + +#define PLX_ICR_MASK_EEPROM 0x1F000000 + +#define EEPROM_DELAY 1 + +/*============================================================================= + Bits for the ME4000_AO_CTRL_REG register + ===========================================================================*/ + +#define ME4000_AO_CTRL_BIT_MODE_0 0x001 +#define ME4000_AO_CTRL_BIT_MODE_1 0x002 +#define ME4000_AO_CTRL_MASK_MODE 0x003 +#define ME4000_AO_CTRL_BIT_STOP 0x004 +#define ME4000_AO_CTRL_BIT_ENABLE_FIFO 0x008 +#define ME4000_AO_CTRL_BIT_ENABLE_EX_TRIG 0x010 +#define ME4000_AO_CTRL_BIT_EX_TRIG_EDGE 0x020 +#define ME4000_AO_CTRL_BIT_IMMEDIATE_STOP 0x080 +#define ME4000_AO_CTRL_BIT_ENABLE_DO 0x100 +#define ME4000_AO_CTRL_BIT_ENABLE_IRQ 0x200 +#define ME4000_AO_CTRL_BIT_RESET_IRQ 0x400 + +/*============================================================================= + Bits for the ME4000_AO_STATUS_REG register + ===========================================================================*/ + +#define ME4000_AO_STATUS_BIT_FSM 0x01 +#define ME4000_AO_STATUS_BIT_FF 0x02 +#define ME4000_AO_STATUS_BIT_HF 0x04 +#define ME4000_AO_STATUS_BIT_EF 0x08 + +/*============================================================================= + Bits for the ME4000_AI_CTRL_REG register + ===========================================================================*/ + +#define ME4000_AI_CTRL_BIT_MODE_0 0x00000001 +#define ME4000_AI_CTRL_BIT_MODE_1 0x00000002 +#define ME4000_AI_CTRL_BIT_MODE_2 0x00000004 +#define ME4000_AI_CTRL_BIT_SAMPLE_HOLD 0x00000008 +#define ME4000_AI_CTRL_BIT_IMMEDIATE_STOP 0x00000010 +#define ME4000_AI_CTRL_BIT_STOP 0x00000020 +#define ME4000_AI_CTRL_BIT_CHANNEL_FIFO 0x00000040 +#define ME4000_AI_CTRL_BIT_DATA_FIFO 0x00000080 +#define ME4000_AI_CTRL_BIT_FULLSCALE 0x00000100 +#define ME4000_AI_CTRL_BIT_OFFSET 0x00000200 +#define ME4000_AI_CTRL_BIT_EX_TRIG_ANALOG 0x00000400 +#define ME4000_AI_CTRL_BIT_EX_TRIG 0x00000800 +#define ME4000_AI_CTRL_BIT_EX_TRIG_FALLING 0x00001000 +#define ME4000_AI_CTRL_BIT_EX_IRQ 0x00002000 +#define ME4000_AI_CTRL_BIT_EX_IRQ_RESET 0x00004000 +#define ME4000_AI_CTRL_BIT_LE_IRQ 0x00008000 +#define ME4000_AI_CTRL_BIT_LE_IRQ_RESET 0x00010000 +#define ME4000_AI_CTRL_BIT_HF_IRQ 0x00020000 +#define ME4000_AI_CTRL_BIT_HF_IRQ_RESET 0x00040000 +#define ME4000_AI_CTRL_BIT_SC_IRQ 0x00080000 +#define ME4000_AI_CTRL_BIT_SC_IRQ_RESET 0x00100000 +#define ME4000_AI_CTRL_BIT_SC_RELOAD 0x00200000 +#define ME4000_AI_CTRL_BIT_EX_TRIG_BOTH 0x80000000 + +/*============================================================================= + Bits for the ME4000_AI_STATUS_REG register + ===========================================================================*/ + +#define ME4000_AI_STATUS_BIT_EF_CHANNEL 0x00400000 +#define ME4000_AI_STATUS_BIT_HF_CHANNEL 0x00800000 +#define ME4000_AI_STATUS_BIT_FF_CHANNEL 0x01000000 +#define ME4000_AI_STATUS_BIT_EF_DATA 0x02000000 +#define ME4000_AI_STATUS_BIT_HF_DATA 0x04000000 +#define ME4000_AI_STATUS_BIT_FF_DATA 0x08000000 +#define ME4000_AI_STATUS_BIT_LE 0x10000000 +#define ME4000_AI_STATUS_BIT_FSM 0x20000000 + +/*============================================================================= + Bits for the ME4000_IRQ_STATUS_REG register + ===========================================================================*/ + +#define ME4000_IRQ_STATUS_BIT_EX 0x01 +#define ME4000_IRQ_STATUS_BIT_LE 0x02 +#define ME4000_IRQ_STATUS_BIT_AI_HF 0x04 +#define ME4000_IRQ_STATUS_BIT_AO_0_HF 0x08 +#define ME4000_IRQ_STATUS_BIT_AO_1_HF 0x10 +#define ME4000_IRQ_STATUS_BIT_AO_2_HF 0x20 +#define ME4000_IRQ_STATUS_BIT_AO_3_HF 0x40 +#define ME4000_IRQ_STATUS_BIT_SC 0x80 + +/*============================================================================= + Bits for the ME4000_DIO_CTRL_REG register + ===========================================================================*/ + +#define ME4000_DIO_CTRL_BIT_MODE_0 0x0001 +#define ME4000_DIO_CTRL_BIT_MODE_1 0x0002 +#define ME4000_DIO_CTRL_BIT_MODE_2 0x0004 +#define ME4000_DIO_CTRL_BIT_MODE_3 0x0008 +#define ME4000_DIO_CTRL_BIT_MODE_4 0x0010 +#define ME4000_DIO_CTRL_BIT_MODE_5 0x0020 +#define ME4000_DIO_CTRL_BIT_MODE_6 0x0040 +#define ME4000_DIO_CTRL_BIT_MODE_7 0x0080 + +#define ME4000_DIO_CTRL_BIT_FUNCTION_0 0x0100 +#define ME4000_DIO_CTRL_BIT_FUNCTION_1 0x0200 + +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_0 0x0400 +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_1 0x0800 +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_2 0x1000 +#define ME4000_DIO_CTRL_BIT_FIFO_HIGH_3 0x2000 + +/*============================================================================= + Information about the hardware capabilities + ===========================================================================*/ + +typedef struct me4000_ao_info { + int count; + int fifo_count; +} me4000_ao_info_t; + +typedef struct me4000_ai_info { + int count; + int sh_count; + int diff_count; + int ex_trig_analog; +} me4000_ai_info_t; + +typedef struct me4000_dio_info { + int count; +} me4000_dio_info_t; + +typedef struct me4000_cnt_info { + int count; +} me4000_cnt_info_t; + +typedef struct me4000_board { + const char *name; + unsigned short device_id; + me4000_ao_info_t ao; + me4000_ai_info_t ai; + me4000_dio_info_t dio; + me4000_cnt_info_t cnt; +} me4000_board_t; + +#define thisboard ((const me4000_board_t *)dev->board_ptr) + +/*============================================================================= + Global board and subdevice information structures + ===========================================================================*/ + +typedef struct me4000_ao_context { + int irq; + + unsigned long mirror; // Store the last written value + + unsigned long ctrl_reg; + unsigned long status_reg; + unsigned long fifo_reg; + unsigned long single_reg; + unsigned long timer_reg; + unsigned long irq_status_reg; + unsigned long preload_reg; +} me4000_ao_context_t; + +typedef struct me4000_ai_context { + int irq; + + unsigned long ctrl_reg; + unsigned long status_reg; + unsigned long channel_list_reg; + unsigned long data_reg; + unsigned long chan_timer_reg; + unsigned long chan_pre_timer_reg; + unsigned long scan_timer_low_reg; + unsigned long scan_timer_high_reg; + unsigned long scan_pre_timer_low_reg; + unsigned long scan_pre_timer_high_reg; + unsigned long start_reg; + unsigned long irq_status_reg; + unsigned long sample_counter_reg; +} me4000_ai_context_t; + +typedef struct me4000_dio_context { + unsigned long dir_reg; + unsigned long ctrl_reg; + unsigned long port_0_reg; + unsigned long port_1_reg; + unsigned long port_2_reg; + unsigned long port_3_reg; +} me4000_dio_context_t; + +typedef struct me4000_cnt_context { + unsigned long ctrl_reg; + unsigned long counter_0_reg; + unsigned long counter_1_reg; + unsigned long counter_2_reg; +} me4000_cnt_context_t; + +typedef struct me4000_info { + unsigned long plx_regbase; // PLX configuration space base address + unsigned long me4000_regbase; // Base address of the ME4000 + unsigned long timer_regbase; // Base address of the timer circuit + unsigned long program_regbase; // Base address to set the program pin for the xilinx + + unsigned long plx_regbase_size; // PLX register set space + unsigned long me4000_regbase_size; // ME4000 register set space + unsigned long timer_regbase_size; // Timer circuit register set space + unsigned long program_regbase_size; // Size of program base address of the ME4000 + + unsigned int serial_no; // Serial number of the board + unsigned char hw_revision; // Hardware revision of the board + unsigned short vendor_id; // Meilhaus vendor id + unsigned short device_id; // Device id + + struct pci_dev *pci_dev_p; // General PCI information + + unsigned int irq; // IRQ assigned from the PCI BIOS + + struct me4000_ai_context ai_context; // Analog input specific context + struct me4000_ao_context ao_context[4]; // Vector with analog output specific context + struct me4000_dio_context dio_context; // Digital I/O specific context + struct me4000_cnt_context cnt_context; // Counter specific context +} me4000_info_t; + +#define info ((me4000_info_t *)dev->private) + +/*----------------------------------------------------------------------------- + Defines for analog input + ----------------------------------------------------------------------------*/ + +/* General stuff */ +#define ME4000_AI_FIFO_COUNT 2048 + +#define ME4000_AI_MIN_TICKS 66 +#define ME4000_AI_MIN_SAMPLE_TIME 2000 // Minimum sample time [ns] +#define ME4000_AI_BASE_FREQUENCY (unsigned int) 33E6 + +/* Channel list defines and masks */ +#define ME4000_AI_CHANNEL_LIST_COUNT 1024 + +#define ME4000_AI_LIST_INPUT_SINGLE_ENDED 0x000 +#define ME4000_AI_LIST_INPUT_DIFFERENTIAL 0x020 + +#define ME4000_AI_LIST_RANGE_BIPOLAR_10 0x000 +#define ME4000_AI_LIST_RANGE_BIPOLAR_2_5 0x040 +#define ME4000_AI_LIST_RANGE_UNIPOLAR_10 0x080 +#define ME4000_AI_LIST_RANGE_UNIPOLAR_2_5 0x0C0 + +#define ME4000_AI_LIST_LAST_ENTRY 0x100 + +/*----------------------------------------------------------------------------- + Defines for counters + ----------------------------------------------------------------------------*/ + +#define ME4000_CNT_COUNTER_0 0x00 +#define ME4000_CNT_COUNTER_1 0x40 +#define ME4000_CNT_COUNTER_2 0x80 + +#define ME4000_CNT_MODE_0 0x00 // Change state if zero crossing +#define ME4000_CNT_MODE_1 0x02 // Retriggerable One-Shot +#define ME4000_CNT_MODE_2 0x04 // Asymmetrical divider +#define ME4000_CNT_MODE_3 0x06 // Symmetrical divider +#define ME4000_CNT_MODE_4 0x08 // Counter start by software trigger +#define ME4000_CNT_MODE_5 0x0A // Counter start by hardware trigger + +#endif