dt-bindings: leds: skyworks,aat1290: convert to dtschema
Convert the Skyworks Solutions, Inc. AAT1290 Current Regulator bindings to DT Schema. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220721160611.250274-1-krzysztof.kozlowski@linaro.org
This commit is contained in:
Krzysztof Kozlowski
Rob Herring
parent
5b967e8eca
commit
e43232c004
|
|
@ -1,77 +0,0 @@
|
|||
* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
|
||||
|
||||
The device is controlled through two pins: FL_EN and EN_SET. The pins when,
|
||||
asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
|
||||
respectively. In order to add a capability of selecting the strobe signal source
|
||||
(e.g. CPU or camera sensor) there is an additional switch required, independent
|
||||
of the flash chip. The switch is controlled with pin control.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : Must be "skyworks,aat1290".
|
||||
- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
|
||||
- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
|
||||
|
||||
Optional properties:
|
||||
- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
|
||||
"default" and "host" must refer to the same pin configuration
|
||||
node, which sets the host as a strobe signal provider. Entry
|
||||
"isp" must refer to the pin configuration node, which sets the
|
||||
ISP as a strobe signal provider.
|
||||
|
||||
A discrete LED element connected to the device must be represented by a child
|
||||
node - see Documentation/devicetree/bindings/leds/common.txt.
|
||||
|
||||
Required properties of the LED child node:
|
||||
- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
|
||||
- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
|
||||
Maximum flash LED supply current can be calculated using
|
||||
following formula: I = 1A * 162kohm / Rset.
|
||||
- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
|
||||
Maximum flash timeout can be calculated using following
|
||||
formula: T = 8.82 * 10^9 * Ct.
|
||||
|
||||
Optional properties of the LED child node:
|
||||
- function : see Documentation/devicetree/bindings/leds/common.txt
|
||||
- color : see Documentation/devicetree/bindings/leds/common.txt
|
||||
- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
|
||||
|
||||
Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
|
||||
a switch that allows for routing strobe signal either from the host or from
|
||||
the camera sensor):
|
||||
|
||||
#include "exynos4412.dtsi"
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
led-controller {
|
||||
compatible = "skyworks,aat1290";
|
||||
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
|
||||
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default", "host", "isp";
|
||||
pinctrl-0 = <&camera_flash_host>;
|
||||
pinctrl-1 = <&camera_flash_host>;
|
||||
pinctrl-2 = <&camera_flash_isp>;
|
||||
|
||||
camera_flash: led {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-max-microamp = <520833>;
|
||||
flash-max-microamp = <1012500>;
|
||||
flash-max-timeout-us = <1940000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl_0 {
|
||||
camera_flash_host: camera-flash-host {
|
||||
samsung,pins = "gpj1-0";
|
||||
samsung,pin-function = <1>;
|
||||
samsung,pin-val = <0>;
|
||||
};
|
||||
|
||||
camera_flash_isp: camera-flash-isp {
|
||||
samsung,pins = "gpj1-0";
|
||||
samsung,pin-function = <1>;
|
||||
samsung,pin-val = <1>;
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,95 @@
|
|||
# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
|
||||
%YAML 1.2
|
||||
---
|
||||
$id: http://devicetree.org/schemas/leds/skyworks,aat1290.yaml#
|
||||
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
||||
|
||||
title: Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
|
||||
|
||||
maintainers:
|
||||
- Jacek Anaszewski <jacek.anaszewski@gmail.com>
|
||||
- Krzysztof Kozlowski <krzk@kernel.org>
|
||||
|
||||
description: |
|
||||
The device is controlled through two pins:: FL_EN and EN_SET. The pins when,
|
||||
asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
|
||||
respectively. In order to add a capability of selecting the strobe signal
|
||||
source (e.g. CPU or camera sensor) there is an additional switch required,
|
||||
independent of the flash chip. The switch is controlled with pin control.
|
||||
|
||||
properties:
|
||||
compatible:
|
||||
const: skyworks,aat1290
|
||||
|
||||
enset-gpios:
|
||||
maxItems: 1
|
||||
description: EN_SET pin
|
||||
|
||||
flen-gpios:
|
||||
maxItems: 1
|
||||
description: FL_EN pin
|
||||
|
||||
led:
|
||||
$ref: common.yaml#
|
||||
unevaluatedProperties: false
|
||||
|
||||
properties:
|
||||
led-max-microamp: true
|
||||
|
||||
flash-max-microamp:
|
||||
description: |
|
||||
Maximum flash LED supply current can be calculated using following
|
||||
formula:: I = 1A * 162 kOhm / Rset.
|
||||
|
||||
flash-max-timeout-us:
|
||||
description: |
|
||||
Maximum flash timeout can be calculated using following formula::
|
||||
T = 8.82 * 10^9 * Ct.
|
||||
|
||||
required:
|
||||
- flash-max-microamp
|
||||
- flash-max-timeout-us
|
||||
- led-max-microamp
|
||||
|
||||
pinctrl-names:
|
||||
items:
|
||||
- const: default
|
||||
- const: host
|
||||
- const: isp
|
||||
|
||||
pinctrl-0: true
|
||||
pinctrl-1: true
|
||||
pinctrl-2: true
|
||||
|
||||
required:
|
||||
- compatible
|
||||
- enset-gpios
|
||||
- flen-gpios
|
||||
- led
|
||||
|
||||
additionalProperties: false
|
||||
|
||||
examples:
|
||||
- |
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
// Ct = 220 nF, Rset = 160 kOhm
|
||||
led-controller {
|
||||
compatible = "skyworks,aat1290";
|
||||
flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
|
||||
enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
pinctrl-names = "default", "host", "isp";
|
||||
pinctrl-0 = <&camera_flash_host>;
|
||||
pinctrl-1 = <&camera_flash_host>;
|
||||
pinctrl-2 = <&camera_flash_isp>;
|
||||
|
||||
led {
|
||||
function = LED_FUNCTION_FLASH;
|
||||
color = <LED_COLOR_ID_WHITE>;
|
||||
led-max-microamp = <520833>;
|
||||
flash-max-microamp = <1012500>;
|
||||
flash-max-timeout-us = <1940000>;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue