cfg80211: AP mode driver offload for FILS association crypto

Add a driver FILS crypto offload extended capability flag to indicate
that the driver running in AP mode is capable of handling encryption
and decryption of (Re)Association request and response frames.
Add a command to set FILS AAD data to driver.

This feature is supported on drivers running in AP mode only.
This extended capability is exchanged with hostapd during cfg80211
init. If the driver indicates this capability, then before sending the
Authentication response frame, hostapd sets FILS AAD data to the
driver. This allows the driver to decrypt (Re)Association Request
frame and encrypt (Re)Association Response frame. FILS Key derivation
will still be done in hostapd.

Signed-off-by: Subrat Mishra <subratm@codeaurora.org>
Link: https://lore.kernel.org/r/1631685143-13530-1-git-send-email-subratm@codeaurora.org
[fix whitespace]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This commit is contained in:
Subrat Mishra 2021-09-15 11:22:23 +05:30 committed by Johannes Berg
parent cd8793f97f
commit e306784a8d
5 changed files with 134 additions and 0 deletions

View File

@ -739,6 +739,22 @@ struct cfg80211_tid_config {
struct cfg80211_tid_cfg tid_conf[];
};
/**
* struct cfg80211_fils_aad - FILS AAD data
* @macaddr: STA MAC address
* @kek: FILS KEK
* @kek_len: FILS KEK length
* @snonce: STA Nonce
* @anonce: AP Nonce
*/
struct cfg80211_fils_aad {
const u8 *macaddr;
const u8 *kek;
u8 kek_len;
const u8 *snonce;
const u8 *anonce;
};
/**
* cfg80211_get_chandef_type - return old channel type from chandef
* @chandef: the channel definition
@ -4018,6 +4034,10 @@ struct mgmt_frame_regs {
* @set_sar_specs: Update the SAR (TX power) settings.
*
* @color_change: Initiate a color change.
*
* @set_fils_aad: Set FILS AAD data to the AP driver so that the driver can use
* those to decrypt (Re)Association Request and encrypt (Re)Association
* Response frame.
*/
struct cfg80211_ops {
int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow);
@ -4348,6 +4368,8 @@ struct cfg80211_ops {
int (*color_change)(struct wiphy *wiphy,
struct net_device *dev,
struct cfg80211_color_change_settings *params);
int (*set_fils_aad)(struct wiphy *wiphy, struct net_device *dev,
struct cfg80211_fils_aad *fils_aad);
};
/*

View File

@ -300,6 +300,29 @@
* the interface goes down.
*/
/**
* DOC: FILS shared key crypto offload
*
* This feature is applicable to drivers running in AP mode.
*
* FILS shared key crypto offload can be advertised by drivers by setting
* @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support
* FILS shared key crypto offload should be able to encrypt and decrypt
* association frames for FILS shared key authentication as per IEEE 802.11ai.
* With this capability, for FILS key derivation, drivers depend on userspace.
*
* After FILS key derivation, userspace shares the FILS AAD details with the
* driver and the driver stores the same to use in decryption of association
* request and in encryption of association response. The below parameters
* should be given to the driver in %NL80211_CMD_SET_FILS_AAD.
* %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA
* %NL80211_ATTR_FILS_KEK - Used for encryption or decryption
* %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption
* (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
*
* Once the association is done, the driver cleans the FILS AAD data.
*/
/**
* enum nl80211_commands - supported nl80211 commands
*
@ -1200,6 +1223,12 @@
* @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change
* has completed
*
* @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using -
* &NL80211_ATTR_MAC - for STA MAC address
* &NL80211_ATTR_FILS_KEK - for KEK
* &NL80211_ATTR_FILS_NONCES - for FILS Nonces
* (STA Nonce 16 bytes followed by AP Nonce 16 bytes)
*
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
@ -1440,6 +1469,8 @@ enum nl80211_commands {
NL80211_CMD_COLOR_CHANGE_ABORTED,
NL80211_CMD_COLOR_CHANGE_COMPLETED,
NL80211_CMD_SET_FILS_AAD,
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
@ -5995,6 +6026,11 @@ enum nl80211_feature_flags {
* @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision
* detection and change announcemnts.
*
* @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports
* FILS encryption and decryption for (Re)Association Request and Response
* frames. Userspace has to share FILS AAD details to the driver by using
* @NL80211_CMD_SET_FILS_AAD.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
*/
@ -6060,6 +6096,7 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_SECURE_RTT,
NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE,
NL80211_EXT_FEATURE_BSS_COLOR,
NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,

View File

@ -14936,6 +14936,29 @@ out:
return err;
}
static int nl80211_set_fils_aad(struct sk_buff *skb,
struct genl_info *info)
{
struct cfg80211_registered_device *rdev = info->user_ptr[0];
struct net_device *dev = info->user_ptr[1];
struct cfg80211_fils_aad fils_aad = {};
u8 *nonces;
if (!info->attrs[NL80211_ATTR_MAC] ||
!info->attrs[NL80211_ATTR_FILS_KEK] ||
!info->attrs[NL80211_ATTR_FILS_NONCES])
return -EINVAL;
fils_aad.macaddr = nla_data(info->attrs[NL80211_ATTR_MAC]);
fils_aad.kek_len = nla_len(info->attrs[NL80211_ATTR_FILS_KEK]);
fils_aad.kek = nla_data(info->attrs[NL80211_ATTR_FILS_KEK]);
nonces = nla_data(info->attrs[NL80211_ATTR_FILS_NONCES]);
fils_aad.snonce = nonces;
fils_aad.anonce = nonces + FILS_NONCE_LEN;
return rdev_set_fils_aad(rdev, dev, &fils_aad);
}
#define NL80211_FLAG_NEED_WIPHY 0x01
#define NL80211_FLAG_NEED_NETDEV 0x02
#define NL80211_FLAG_NEED_RTNL 0x04
@ -15937,6 +15960,13 @@ static const struct genl_small_ops nl80211_small_ops[] = {
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP |
NL80211_FLAG_NEED_RTNL,
},
{
.cmd = NL80211_CMD_SET_FILS_AAD,
.validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
.doit = nl80211_set_fils_aad,
.flags = GENL_UNS_ADMIN_PERM,
.internal_flags = NL80211_FLAG_NEED_NETDEV_UP,
},
};
static struct genl_family nl80211_fam __ro_after_init = {

View File

@ -1381,4 +1381,18 @@ static inline int rdev_color_change(struct cfg80211_registered_device *rdev,
return ret;
}
static inline int
rdev_set_fils_aad(struct cfg80211_registered_device *rdev,
struct net_device *dev, struct cfg80211_fils_aad *fils_aad)
{
int ret = -EOPNOTSUPP;
trace_rdev_set_fils_aad(&rdev->wiphy, dev, fils_aad);
if (rdev->ops->set_fils_aad)
ret = rdev->ops->set_fils_aad(&rdev->wiphy, dev, fils_aad);
trace_rdev_return_int(&rdev->wiphy, ret);
return ret;
}
#endif /* __CFG80211_RDEV_OPS */

View File

@ -167,6 +167,19 @@
__entry->center_freq1, __entry->freq1_offset, \
__entry->center_freq2
#define FILS_AAD_ASSIGN(fa) \
do { \
if (fa) { \
ether_addr_copy(__entry->macaddr, fa->macaddr); \
__entry->kek_len = fa->kek_len; \
} else { \
eth_zero_addr(__entry->macaddr); \
__entry->kek_len = 0; \
} \
} while (0)
#define FILS_AAD_PR_FMT \
"macaddr: %pM, kek_len: %d"
#define SINFO_ENTRY __field(int, generation) \
__field(u32, connected_time) \
__field(u32, inactive_time) \
@ -2614,6 +2627,24 @@ DEFINE_EVENT(wiphy_wdev_cookie_evt, rdev_abort_pmsr,
TP_ARGS(wiphy, wdev, cookie)
);
TRACE_EVENT(rdev_set_fils_aad,
TP_PROTO(struct wiphy *wiphy, struct net_device *netdev,
struct cfg80211_fils_aad *fils_aad),
TP_ARGS(wiphy, netdev, fils_aad),
TP_STRUCT__entry(WIPHY_ENTRY
NETDEV_ENTRY
__array(u8, macaddr, ETH_ALEN)
__field(u8, kek_len)
),
TP_fast_assign(WIPHY_ASSIGN;
NETDEV_ASSIGN;
FILS_AAD_ASSIGN(fils_aad);
),
TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " FILS_AAD_PR_FMT,
WIPHY_PR_ARG, NETDEV_PR_ARG, __entry->macaddr,
__entry->kek_len)
);
/*************************************************************
* cfg80211 exported functions traces *
*************************************************************/