UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: at91/aic: add irq domain and device tree support 

Add an irqdomain for the AIC interrupt controller.
The device tree support is mapping the registers and
is using the irq_domain_add_legacy() to manage hwirq
translation.
The documentation is describing the meaning of the
two cells required for using this "interrupt-controller"
in a device tree node.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This commit is contained in:
Nicolas Ferre 2011-11-22 22:26:09 +01:00
parent 89d4a1753b
commit e261501d05
5 changed files with 117 additions and 30 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

38
Documentation/devicetree/bindings/arm/atmel-aic.txt Normal file
View File

@ -0,0 +1,38 @@
* Advanced Interrupt Controller (AIC)
Required properties:
- compatible: Should be "atmel,<chip>-aic"
- interrupt-controller: Identifies the node as an interrupt controller.
- interrupt-parent: For single AIC system, it is an empty property.
- #interrupt-cells: The number of cells to define the interrupts. It sould be 2.
The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
1 = low-to-high edge triggered.
2 = high-to-low edge triggered.
4 = active high level-sensitive.
8 = active low level-sensitive.
Valid combinations are 1, 2, 3, 4, 8.
Default flag for internal sources should be set to 4 (active high).
- reg: Should contain AIC registers location and length
Examples:
/*
* AIC
*/
aic: interrupt-controller@fffff000 {
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
#interrupt-cells = <2>;
reg = <0xfffff000 0x200>;
};
/*
* An interrupt generating device that is wired to an AIC.
*/
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <21 4>;
};

1
arch/arm/Kconfig
View File

@ -322,6 +322,7 @@ config ARCH_AT91
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select CLKDEV_LOOKUP
select IRQ_DOMAIN
help
This enables support for systems based on the Atmel AT91RM9200,
AT91SAM9 processors.

18
arch/arm/boot/dts/at91sam9g20.dtsi
View File

@ -47,7 +47,7 @@
ranges;
aic: interrupt-controller@fffff000 {
#interrupt-cells = <1>;
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
@ -57,14 +57,14 @@
dbgu: serial@fffff200 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffff200 0x200>;
interrupts = <1>;
interrupts = <1 4>;
status = "disabled";
};
usart0: serial@fffb0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb0000 0x200>;
interrupts = <6>;
interrupts = <6 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -73,7 +73,7 @@
usart1: serial@fffb4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb4000 0x200>;
interrupts = <7>;
interrupts = <7 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -82,7 +82,7 @@
usart2: serial@fffb8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffb8000 0x200>;
interrupts = <8>;
interrupts = <8 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -91,7 +91,7 @@
usart3: serial@fffd0000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd0000 0x200>;
interrupts = <23>;
interrupts = <23 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -100,7 +100,7 @@
usart4: serial@fffd4000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd4000 0x200>;
interrupts = <24>;
interrupts = <24 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -109,7 +109,7 @@
usart5: serial@fffd8000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfffd8000 0x200>;
interrupts = <25>;
interrupts = <25 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -118,7 +118,7 @@
macb0: ethernet@fffc4000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffc4000 0x100>;
interrupts = <21>;
interrupts = <21 4>;
status = "disabled";
};
};

16
arch/arm/boot/dts/at91sam9g45.dtsi
View File

@ -46,7 +46,7 @@
ranges;
aic: interrupt-controller@fffff000 {
#interrupt-cells = <1>;
#interrupt-cells = <2>;
compatible = "atmel,at91rm9200-aic";
interrupt-controller;
interrupt-parent;
@ -56,20 +56,20 @@
dma: dma-controller@ffffec00 {
compatible = "atmel,at91sam9g45-dma";
reg = <0xffffec00 0x200>;
interrupts = <21>;
interrupts = <21 4>;
};
dbgu: serial@ffffee00 {
compatible = "atmel,at91sam9260-usart";
reg = <0xffffee00 0x200>;
interrupts = <1>;
interrupts = <1 4>;
status = "disabled";
};
usart0: serial@fff8c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff8c000 0x200>;
interrupts = <7>;
interrupts = <7 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -78,7 +78,7 @@
usart1: serial@fff90000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff90000 0x200>;
interrupts = <8>;
interrupts = <8 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -87,7 +87,7 @@
usart2: serial@fff94000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff94000 0x200>;
interrupts = <9>;
interrupts = <9 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -96,7 +96,7 @@
usart3: serial@fff98000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xfff98000 0x200>;
interrupts = <10>;
interrupts = <10 4>;
atmel,use-dma-rx;
atmel,use-dma-tx;
status = "disabled";
@ -105,7 +105,7 @@
macb0: ethernet@fffbc000 {
compatible = "cdns,at32ap7000-macb", "cdns,macb";
reg = <0xfffbc000 0x100>;
interrupts = <25>;
interrupts = <25 4>;
status = "disabled";
};
};

74
arch/arm/mach-at91/irq.c
View File

@ -24,6 +24,12 @@
#include <linux/module.h>
#include <linux/mm.h>
#include <linux/types.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/irqdomain.h>
#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/irq.h>
@ -34,22 +40,24 @@
#include <asm/mach/map.h>
void __iomem *at91_aic_base;
static struct irq_domain *at91_aic_domain;
static struct device_node *at91_aic_np;
static void at91_aic_mask_irq(struct irq_data *d)
{
/* Disable interrupt on AIC */
at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
}
static void at91_aic_unmask_irq(struct irq_data *d)
{
/* Enable interrupt on AIC */
at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
}
unsigned int at91_extern_irq;
#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
static int at91_aic_set_type(struct irq_data *d, unsigned type)
{
@ -63,13 +71,13 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
srctype = AT91_AIC_SRCTYPE_RISING;
break;
case IRQ_TYPE_LEVEL_LOW:
if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq)) /* only supported on external interrupts */
if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_LOW;
else
return -EINVAL;
break;
case IRQ_TYPE_EDGE_FALLING:
if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq)) /* only supported on external interrupts */
if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
srctype = AT91_AIC_SRCTYPE_FALLING;
else
return -EINVAL;
@ -78,8 +86,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
return -EINVAL;
}
smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
return 0;
}
@ -90,13 +98,13 @@ static u32 backups;
static int at91_aic_set_wake(struct irq_data *d, unsigned value)
{
if (unlikely(d->irq >= 32))
if (unlikely(d->hwirq >= NR_AIC_IRQS))
return -EINVAL;
if (value)
wakeups |= (1 << d->irq);
wakeups |= (1 << d->hwirq);
else
wakeups &= ~(1 << d->irq);
wakeups &= ~(1 << d->hwirq);
return 0;
}
@ -127,24 +135,64 @@ static struct irq_chip at91_aic_chip = {
.irq_set_wake = at91_aic_set_wake,
};
#if defined(CONFIG_OF)
static int __init __at91_aic_of_init(struct device_node *node,
struct device_node *parent)
{
at91_aic_base = of_iomap(node, 0);
at91_aic_np = node;
return 0;
}
static const struct of_device_id aic_ids[] __initconst = {
{ .compatible = "atmel,at91rm9200-aic", .data = __at91_aic_of_init },
{ /*sentinel*/ }
};
static void __init at91_aic_of_init(void)
{
of_irq_init(aic_ids);
}
#else
static void __init at91_aic_of_init(void) {}
#endif
/*
* Initialize the AIC interrupt controller.
*/
void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
{
unsigned int i;
int irq_base;
at91_aic_base = ioremap(AT91_AIC, 512);
if (of_have_populated_dt())
at91_aic_of_init();
else
at91_aic_base = ioremap(AT91_AIC, 512);
if (!at91_aic_base)
panic("Impossible to ioremap AT91_AIC\n");
panic("Unable to ioremap AIC registers\n");
/* Add irq domain for AIC */
irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0);
if (irq_base < 0) {
WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
irq_base = 0;
}
at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS,
irq_base, 0,
&irq_domain_simple_ops, NULL);
if (!at91_aic_domain)
panic("Unable to add AIC irq domain\n");
/*
* The IVR is used by macro get_irqnr_and_base to read and verify.
* The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
*/
for (i = 0; i < NR_AIC_IRQS; i++) {
/* Put irq number in Source Vector Register: */
/* Put hardware irq number in Source Vector Register: */
at91_aic_write(AT91_AIC_SVR(i), i);
/* Active Low interrupt, with the specified priority */
at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);