clk: imx: Mark dram pll on 8mm and 8mn with CLK_GET_RATE_NOCACHE
DRAM frequency switches are executed in firmware and can change the configuration of the DRAM PLL outside linux. Mark these CLKs with CLK_GET_RATE_NOCACHE so we always read back the PLL config registers and recalculate rates. In current DRAM frequency tables on 8mm/8mn only the maximum frequency uses the PLL so it's always configured in the same way. However reading back the PLL configuration is the correct behavior and allows additional setpoints in the future. Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Acked-by: Stephen Boyd <sboyd@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This commit is contained in:
parent
d9ea9ca2b4
commit
e18f64712e
|
@ -328,7 +328,7 @@ static int imx8mm_clocks_probe(struct platform_device *pdev)
|
|||
clks[IMX8MM_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
|
||||
clks[IMX8MM_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
|
||||
clks[IMX8MM_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
|
||||
clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
|
||||
clks[IMX8MM_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
|
||||
clks[IMX8MM_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
|
||||
clks[IMX8MM_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
|
||||
clks[IMX8MM_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
|
||||
|
|
|
@ -325,7 +325,7 @@ static int imx8mn_clocks_probe(struct platform_device *pdev)
|
|||
clks[IMX8MN_AUDIO_PLL1] = imx_clk_pll14xx("audio_pll1", "audio_pll1_ref_sel", base, &imx_1443x_pll);
|
||||
clks[IMX8MN_AUDIO_PLL2] = imx_clk_pll14xx("audio_pll2", "audio_pll2_ref_sel", base + 0x14, &imx_1443x_pll);
|
||||
clks[IMX8MN_VIDEO_PLL1] = imx_clk_pll14xx("video_pll1", "video_pll1_ref_sel", base + 0x28, &imx_1443x_pll);
|
||||
clks[IMX8MN_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_pll);
|
||||
clks[IMX8MN_DRAM_PLL] = imx_clk_pll14xx("dram_pll", "dram_pll_ref_sel", base + 0x50, &imx_1443x_dram_pll);
|
||||
clks[IMX8MN_GPU_PLL] = imx_clk_pll14xx("gpu_pll", "gpu_pll_ref_sel", base + 0x64, &imx_1416x_pll);
|
||||
clks[IMX8MN_VPU_PLL] = imx_clk_pll14xx("vpu_pll", "vpu_pll_ref_sel", base + 0x74, &imx_1416x_pll);
|
||||
clks[IMX8MN_ARM_PLL] = imx_clk_pll14xx("arm_pll", "arm_pll_ref_sel", base + 0x84, &imx_1416x_pll);
|
||||
|
|
|
@ -67,6 +67,13 @@ struct imx_pll14xx_clk imx_1443x_pll = {
|
|||
.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
|
||||
};
|
||||
|
||||
struct imx_pll14xx_clk imx_1443x_dram_pll = {
|
||||
.type = PLL_1443X,
|
||||
.rate_table = imx_pll1443x_tbl,
|
||||
.rate_count = ARRAY_SIZE(imx_pll1443x_tbl),
|
||||
.flags = CLK_GET_RATE_NOCACHE,
|
||||
};
|
||||
|
||||
struct imx_pll14xx_clk imx_1416x_pll = {
|
||||
.type = PLL_1416X,
|
||||
.rate_table = imx_pll1416x_tbl,
|
||||
|
|
|
@ -52,6 +52,7 @@ struct imx_pll14xx_clk {
|
|||
|
||||
extern struct imx_pll14xx_clk imx_1416x_pll;
|
||||
extern struct imx_pll14xx_clk imx_1443x_pll;
|
||||
extern struct imx_pll14xx_clk imx_1443x_dram_pll;
|
||||
|
||||
#define imx_clk_cpu(name, parent_name, div, mux, pll, step) \
|
||||
imx_clk_hw_cpu(name, parent_name, div, mux, pll, step)->clk
|
||||
|
|
Loading…
Reference in New Issue