From e0f03e87fc6f27a8af9896f430f2945b3b1664c0 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Wed, 16 Dec 2015 07:33:22 +0100 Subject: [PATCH] PNP: respect PNP_DRIVER_RES_DO_NOT_CHANGE when detaching I have a device (Nuvoton 6779D Super-IO IR RC with nuvoton-cir driver) which works after initial boot but not any longer if I unload and re-load the driver module. Digging into the issue I found that unloading the driver calls pnp_disable_dev although the driver has flag PNP_DRIVER_RES_DO_NOT_CHANGE set. IMHO this is not right. Let's have a look at the call chain when probing a device: pnp_device_probe 1. attaches the device 2. if it's not active and PNP_DRIVER_RES_DO_NOT_CHANGE is not set it gets activated 3. probes driver I think pnp_device_remove should do it in reverse order and also respect PNP_DRIVER_RES_DO_NOT_CHANGE. Therefore: 1. call drivers remove callback 2. if device is active and PNP_DRIVER_RES_DO_NOT_CHANGE is not set disable it 3. detach device The change works for me and sounds logical to me. However I don't know the pnp driver in detail so I might be wrong. Signed-off-by: Heiner Kallweit Signed-off-by: Rafael J. Wysocki --- drivers/pnp/driver.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c index 153a493b5413..63452f20e3e9 100644 --- a/drivers/pnp/driver.c +++ b/drivers/pnp/driver.c @@ -74,7 +74,6 @@ void pnp_device_detach(struct pnp_dev *pnp_dev) if (pnp_dev->status == PNP_ATTACHED) pnp_dev->status = PNP_READY; mutex_unlock(&pnp_lock); - pnp_disable_dev(pnp_dev); } static int pnp_device_probe(struct device *dev) @@ -131,6 +130,11 @@ static int pnp_device_remove(struct device *dev) drv->remove(pnp_dev); pnp_dev->driver = NULL; } + + if (pnp_dev->active && + (!drv || !(drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE))) + pnp_disable_dev(pnp_dev); + pnp_device_detach(pnp_dev); return 0; }