mmc: sdhci-pci: Fix SDHCI_RESET_ALL for CQHCI for Intel GLK-based controllers

For Intel controllers, SDHCI_RESET_ALL resets also CQHCI registers.
Normally, SDHCI_RESET_ALL is not used while CQHCI is enabled, but that can
happen on the error path. e.g. if mmc_cqe_recovery() fails, mmc_blk_reset()
is called which, for a eMMC that does not support HW Reset, will cycle the
bus power and the driver will perform SDHCI_RESET_ALL.

So whenever performing SDHCI_RESET_ALL ensure CQHCI is deactivated.
That will force the driver to reinitialize CQHCI when it is next used.

A similar change was done already for sdhci-msm, and other drivers using
CQHCI might benefit from a similar change, if they also have CQHCI reset
by SDHCI_RESET_ALL.

Fixes: 8ee82bda23 ("mmc: sdhci-pci: Add CQHCI support for Intel GLK")
Cc: stable@vger.kernel.org # 5.4.x: 0ffa6cfbd949: mmc: cqhci: Add cqhci_deactivate()
Cc: stable@vger.kernel.org # 5.4+
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20200819121848.16967-1-adrian.hunter@intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
Adrian Hunter 2020-08-19 15:18:48 +03:00 committed by Ulf Hansson
parent 61d7437ed1
commit df57d73276
1 changed files with 9 additions and 1 deletions

View File

@ -232,6 +232,14 @@ static void sdhci_pci_dumpregs(struct mmc_host *mmc)
sdhci_dumpregs(mmc_priv(mmc));
}
static void sdhci_cqhci_reset(struct sdhci_host *host, u8 mask)
{
if ((host->mmc->caps2 & MMC_CAP2_CQE) && (mask & SDHCI_RESET_ALL) &&
host->mmc->cqe_private)
cqhci_deactivate(host->mmc);
sdhci_reset(host, mask);
}
/*****************************************************************************\
* *
* Hardware specific quirk handling *
@ -718,7 +726,7 @@ static const struct sdhci_ops sdhci_intel_glk_ops = {
.set_power = sdhci_intel_set_power,
.enable_dma = sdhci_pci_enable_dma,
.set_bus_width = sdhci_set_bus_width,
.reset = sdhci_reset,
.reset = sdhci_cqhci_reset,
.set_uhs_signaling = sdhci_set_uhs_signaling,
.hw_reset = sdhci_pci_hw_reset,
.irq = sdhci_cqhci_irq,