diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 23968c661415..f9bb1ea14fe4 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -110,17 +110,6 @@ config CPU_S3C2443
 
 # common code
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
 config S3C24XX_SMDK
 	bool
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 9010ebaafff6..2235d0d3b38d 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -44,10 +44,8 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
deleted file mode 100644
index 1edd9b2369c5..000000000000
--- a/arch/arm/mach-s3c24xx/clock-dclk.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
deleted file mode 100644
index d1afcf9252d1..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
deleted file mode 100644
index 5527226fd61f..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
-		return parent_rate;
-
-	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
-	return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.get_rate	= s3c2440_camif_upll_getrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
-	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
-	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
-	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c
deleted file mode 100644
index 6d9b688c442b..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c244x.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index 2d6554140161..ac3ff12a0601 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -67,10 +67,8 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
 extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
-#define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
 #endif
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
index 3415b60082d7..3db6c10de023 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
@@ -42,24 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index c2ef016032ab..c6583cfa5835 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -457,9 +457,6 @@
 
 /* miscellaneous control */
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
 
 /* see clock.h for dclk definitions */
 
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 16281bdc750a..3d8cf3054e7f 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -80,12 +80,6 @@ static struct sleep_save core_save[] = {
 #endif /* CONFIG_SAMSUNG_CLOCK */
 };
 
-#ifdef CONFIG_SAMSUNG_CLOCK
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
-};
-#endif
-
 /* s3c_pm_check_resume_pin
  *
  * check to see if the pin is configured correctly for sleep mode, and
@@ -143,16 +137,10 @@ void s3c_pm_configure_extint(void)
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-#ifdef CONFIG_SAMSUNG_CLOCK
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
-#endif
 }
 
 void s3c_pm_save_core(void)
 {
-#ifdef CONFIG_SAMSUNG_CLOCK
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
-#endif
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
 
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 52801730ab24..7eab88829883 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -83,71 +83,9 @@ void __init s3c2410_map_io(void)
 	iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc));
 }
 
-#ifdef CONFIG_SAMSUNG_CLOCK
-void __init_or_cpufreq s3c2410_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
-}
-#else
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
 }
-#endif
 
 struct bus_type s3c2410_subsys = {
 	.name = "s3c2410-core",
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 564c65037ff2..fb9da2b603a2 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -53,118 +53,6 @@
 
 #include "common.h"
 
-#ifdef CONFIG_SAMSUNG_CLOCK
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-#endif
-
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
 };
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index 1d665d50b034..4a64bcc9eb51 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -78,72 +78,9 @@ void __init s3c244x_map_io(void)
 	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
-#ifdef CONFIG_SAMSUNG_CLOCK
-void __init_or_cpufreq s3c244x_setup_clocks(void)
-{
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
-}
-#else
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
 }
-#endif
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */