fbdev: remove cyblafb driver
A tridentfb driver has all the functionality of the cyblafb driver without the bugs of the latter. Changes to the tridentfb driver: - FBINFO_READS_FAST added to the tridentfb. The cyblafb used a blitter for scrolling which is faster than color expansion on Cyberblade chipsets. The blitter is slower on a discrete Blade3D core. Use the blitter for scrolling in the tridentfb only for integrated Blade3D cores. Now, scrolling speed is about equal for the tridentfb and the cyblafb. - a copyright notice addition is done on request of Jani Monoses (the first author of the tridentfb). Tested on AGP Blade3D card and PCChips M787CLR motherboard: VIA C3 cpu + VT8601 north bridge (aka Cyberblade/i1). Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl> Cc: "Jani Monoses" <jani@ubuntu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Krzysztof Helt
Linus Torvalds
parent
ec549a0fdc
commit
ddb53d48da
|
|
@ -11,8 +11,6 @@ aty128fb.txt
|
|||
- info on the ATI Rage128 frame buffer driver.
|
||||
cirrusfb.txt
|
||||
- info on the driver for Cirrus Logic chipsets.
|
||||
cyblafb/
|
||||
- directory with documentation files related to the cyblafb driver.
|
||||
deferred_io.txt
|
||||
- an introduction to deferred IO.
|
||||
fbcon.txt
|
||||
|
|
|
|||
|
|
@ -1,13 +0,0 @@
|
|||
Bugs
|
||||
====
|
||||
|
||||
I currently don't know of any bug. Please do send reports to:
|
||||
- linux-fbdev-devel@lists.sourceforge.net
|
||||
- Knut_Petersen@t-online.de.
|
||||
|
||||
|
||||
Untested features
|
||||
=================
|
||||
|
||||
All LCD stuff is untested. If it worked in tridentfb, it should work in
|
||||
cyblafb. Please test and report the results to Knut_Petersen@t-online.de.
|
||||
|
|
@ -1,7 +0,0 @@
|
|||
Thanks to
|
||||
=========
|
||||
* Alan Hourihane, for writing the X trident driver
|
||||
* Jani Monoses, for writing the tridentfb driver
|
||||
* Antonino A. Daplas, for review of the first published
|
||||
version of cyblafb and some code
|
||||
* Jochen Hein, for testing and a helpfull bug report
|
||||
|
|
@ -1,17 +0,0 @@
|
|||
Available Documentation
|
||||
=======================
|
||||
|
||||
Apollo PLE 133 Chipset VT8601A North Bridge Datasheet, Rev. 1.82, October 22,
|
||||
2001, available from VIA:
|
||||
|
||||
http://www.viavpsd.com/product/6/15/DS8601A182.pdf
|
||||
|
||||
The datasheet is incomplete, some registers that need to be programmed are not
|
||||
explained at all and important bits are listed as "reserved". But you really
|
||||
need the datasheet to understand the code. "p. xxx" comments refer to page
|
||||
numbers of this document.
|
||||
|
||||
XFree/XOrg drivers are available and of good quality, looking at the code
|
||||
there is a good idea if the datasheet does not provide enough information
|
||||
or if the datasheet seems to be wrong.
|
||||
|
||||
|
|
@ -1,154 +0,0 @@
|
|||
#
|
||||
# Sample fb.modes file
|
||||
#
|
||||
# Provides an incomplete list of working modes for
|
||||
# the cyberblade/i1 graphics core.
|
||||
#
|
||||
# The value 4294967256 is used instead of -40. Of course, -40 is not
|
||||
# a really reasonable value, but chip design does not always follow
|
||||
# logic. Believe me, it's ok, and it's the way the BIOS does it.
|
||||
#
|
||||
# fbset requires 4294967256 in fb.modes and -40 as an argument to
|
||||
# the -t parameter. That's also not too reasonable, and it might change
|
||||
# in the future or might even be differt for your current version.
|
||||
#
|
||||
|
||||
mode "640x480-50"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 47619 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "640x480-60"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 39682 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "640x480-70"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 34013 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "640x480-72"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 33068 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "640x480-75"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 31746 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "640x480-80"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 29761 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "640x480-85"
|
||||
geometry 640 480 2048 4096 8
|
||||
timings 28011 4294967256 24 17 0 216 3
|
||||
endmode
|
||||
|
||||
mode "800x600-50"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 30303 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "800x600-60"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 25252 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "800x600-70"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 21645 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "800x600-72"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 21043 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "800x600-75"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 20202 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "800x600-80"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 18939 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "800x600-85"
|
||||
geometry 800 600 2048 4096 8
|
||||
timings 17825 96 24 14 0 136 11
|
||||
endmode
|
||||
|
||||
mode "1024x768-50"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 19054 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1024x768-60"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 15880 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1024x768-70"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 13610 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1024x768-72"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 13232 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1024x768-75"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 12703 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1024x768-80"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 11910 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1024x768-85"
|
||||
geometry 1024 768 2048 4096 8
|
||||
timings 11209 144 24 29 0 120 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-50"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 11114 232 16 39 0 160 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-60"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 9262 232 16 39 0 160 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-70"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 7939 232 16 39 0 160 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-72"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 7719 232 16 39 0 160 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-75"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 7410 232 16 39 0 160 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-80"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 6946 232 16 39 0 160 3
|
||||
endmode
|
||||
|
||||
mode "1280x1024-85"
|
||||
geometry 1280 1024 2048 4096 8
|
||||
timings 6538 232 16 39 0 160 3
|
||||
endmode
|
||||
|
|
@ -1,79 +0,0 @@
|
|||
Speed
|
||||
=====
|
||||
|
||||
CyBlaFB is much faster than tridentfb and vesafb. Compare the performance data
|
||||
for mode 1280x1024-[8,16,32]@61 Hz.
|
||||
|
||||
Test 1: Cat a file with 2000 lines of 0 characters.
|
||||
Test 2: Cat a file with 2000 lines of 80 characters.
|
||||
Test 3: Cat a file with 2000 lines of 160 characters.
|
||||
|
||||
All values show system time use in seconds, kernel 2.6.12 was used for
|
||||
the measurements. 2.6.13 is a bit slower, 2.6.14 hopefully will include a
|
||||
patch that speeds up kernel bitblitting a lot ( > 20%).
|
||||
|
||||
+-----------+-----------------------------------------------------+
|
||||
| | not accelerated |
|
||||
| TRIDENTFB +-----------------+-----------------+-----------------+
|
||||
| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp |
|
||||
| | noypan | ypan | noypan | ypan | noypan | ypan |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Test 1 | 4.31 | 4.33 | 6.05 | 12.81 | ---- | ---- |
|
||||
| Test 2 | 67.94 | 5.44 | 123.16 | 14.79 | ---- | ---- |
|
||||
| Test 3 | 131.36 | 6.55 | 240.12 | 16.76 | ---- | ---- |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Comments | | | completely bro- |
|
||||
| | | | ken, monitor |
|
||||
| | | | switches off |
|
||||
+-----------+-----------------+-----------------+-----------------+
|
||||
|
||||
|
||||
+-----------+-----------------------------------------------------+
|
||||
| | accelerated |
|
||||
| TRIDENTFB +-----------------+-----------------+-----------------+
|
||||
| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp |
|
||||
| | noypan | ypan | noypan | ypan | noypan | ypan |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Test 1 | ---- | ---- | 20.62 | 1.22 | ---- | ---- |
|
||||
| Test 2 | ---- | ---- | 22.61 | 3.19 | ---- | ---- |
|
||||
| Test 3 | ---- | ---- | 24.59 | 5.16 | ---- | ---- |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Comments | broken, writing | broken, ok only | completely bro- |
|
||||
| | to wrong places | if bgcolor is | ken, monitor |
|
||||
| | on screen + bug | black, bug in | switches off |
|
||||
| | in fillrect() | fillrect() | |
|
||||
+-----------+-----------------+-----------------+-----------------+
|
||||
|
||||
|
||||
+-----------+-----------------------------------------------------+
|
||||
| | not accelerated |
|
||||
| VESAFB +-----------------+-----------------+-----------------+
|
||||
| of 2.6.12 | 8 bpp | 16 bpp | 32 bpp |
|
||||
| | noypan | ypan | noypan | ypan | noypan | ypan |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Test 1 | 4.26 | 3.76 | 5.99 | 7.23 | ---- | ---- |
|
||||
| Test 2 | 65.65 | 4.89 | 120.88 | 9.08 | ---- | ---- |
|
||||
| Test 3 | 126.91 | 5.94 | 235.77 | 11.03 | ---- | ---- |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Comments | vga=0x307 | vga=0x31a | vga=0x31b not |
|
||||
| | fh=80kHz | fh=80kHz | supported by |
|
||||
| | fv=75kHz | fv=75kHz | video BIOS and |
|
||||
| | | | hardware |
|
||||
+-----------+-----------------+-----------------+-----------------+
|
||||
|
||||
|
||||
+-----------+-----------------------------------------------------+
|
||||
| | accelerated |
|
||||
| CYBLAFB +-----------------+-----------------+-----------------+
|
||||
| | 8 bpp | 16 bpp | 32 bpp |
|
||||
| | noypan | ypan | noypan | ypan | noypan | ypan |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Test 1 | 8.02 | 0.23 | 19.04 | 0.61 | 57.12 | 2.74 |
|
||||
| Test 2 | 8.38 | 0.55 | 19.39 | 0.92 | 57.54 | 3.13 |
|
||||
| Test 3 | 8.73 | 0.86 | 19.74 | 1.24 | 57.95 | 3.51 |
|
||||
+-----------+--------+--------+--------+--------+--------+--------+
|
||||
| Comments | | | |
|
||||
| | | | |
|
||||
| | | | |
|
||||
| | | | |
|
||||
+-----------+-----------------+-----------------+-----------------+
|
||||
|
|
@ -1,31 +0,0 @@
|
|||
TODO / Missing features
|
||||
=======================
|
||||
|
||||
Verify LCD stuff "stretch" and "center" options are
|
||||
completely untested ... this code needs to be
|
||||
verified. As I don't have access to such
|
||||
hardware, please contact me if you are
|
||||
willing run some tests.
|
||||
|
||||
Interlaced video modes The reason that interleaved
|
||||
modes are disabled is that I do not know
|
||||
the meaning of the vertical interlace
|
||||
parameter. Also the datasheet mentions a
|
||||
bit d8 of a horizontal interlace parameter,
|
||||
but nowhere the lower 8 bits. Please help
|
||||
if you can.
|
||||
|
||||
low-res double scan modes Who needs it?
|
||||
|
||||
accelerated color blitting Who needs it? The console driver does use color
|
||||
blitting for nothing but drawing the penguine,
|
||||
everything else is done using color expanding
|
||||
blitting of 1bpp character bitmaps.
|
||||
|
||||
ioctls Who needs it?
|
||||
|
||||
TV-out Will be done later. Use "vga= " at boot time
|
||||
to set a suitable video mode.
|
||||
|
||||
??? Feel free to contact me if you have any
|
||||
feature requests
|
||||
|
|
@ -1,217 +0,0 @@
|
|||
CyBlaFB is a framebuffer driver for the Cyberblade/i1 graphics core integrated
|
||||
into the VIA Apollo PLE133 (aka vt8601) south bridge. It is developed and
|
||||
tested using a VIA EPIA 5000 board.
|
||||
|
||||
Cyblafb - compiled into the kernel or as a module?
|
||||
==================================================
|
||||
|
||||
You might compile cyblafb either as a module or compile it permanently into the
|
||||
kernel.
|
||||
|
||||
Unless you have a real reason to do so you should not compile both vesafb and
|
||||
cyblafb permanently into the kernel. It's possible and it helps during the
|
||||
developement cycle, but it's useless and will at least block some otherwise
|
||||
usefull memory for ordinary users.
|
||||
|
||||
Selecting Modes
|
||||
===============
|
||||
|
||||
Startup Mode
|
||||
============
|
||||
|
||||
First of all, you might use the "vga=???" boot parameter as it is
|
||||
documented in vesafb.txt and svga.txt. Cyblafb will detect the video
|
||||
mode selected and will use the geometry and timings found by
|
||||
inspecting the hardware registers.
|
||||
|
||||
video=cyblafb vga=0x317
|
||||
|
||||
Alternatively you might use a combination of the mode, ref and bpp
|
||||
parameters. If you compiled the driver into the kernel, add something
|
||||
like this to the kernel command line:
|
||||
|
||||
video=cyblafb:1280x1024,bpp=16,ref=50 ...
|
||||
|
||||
If you compiled the driver as a module, the same mode would be
|
||||
selected by the following command:
|
||||
|
||||
modprobe cyblafb mode=1280x1024 bpp=16 ref=50 ...
|
||||
|
||||
None of the modes possible to select as startup modes are affected by
|
||||
the problems described at the end of the next subsection.
|
||||
|
||||
For all startup modes cyblafb chooses a virtual x resolution of 2048,
|
||||
the only exception is mode 1280x1024 in combination with 32 bpp. This
|
||||
allows ywrap scrolling for all those modes if rotation is 0 or 2, and
|
||||
also fast scrolling if rotation is 1 or 3. The default virtual y reso-
|
||||
lution is 4096 for bpp == 8, 2048 for bpp==16 and 1024 for bpp == 32,
|
||||
again with the only exception of 1280x1024 at 32 bpp.
|
||||
|
||||
Please do set your video memory size to 8 Mb in the Bios setup. Other
|
||||
values will work, but performace is decreased for a lot of modes.
|
||||
|
||||
Mode changes using fbset
|
||||
========================
|
||||
|
||||
You might use fbset to change the video mode, see "man fbset". Cyblafb
|
||||
generally does assume that you know what you are doing. But it does
|
||||
some checks, especially those that are needed to prevent you from
|
||||
damaging your hardware.
|
||||
|
||||
- only 8, 16, 24 and 32 bpp video modes are accepted
|
||||
- interlaced video modes are not accepted
|
||||
- double scan video modes are not accepted
|
||||
- if a flat panel is found, cyblafb does not allow you
|
||||
to program a resolution higher than the physical
|
||||
resolution of the flat panel monitor
|
||||
- cyblafb does not allow vclk to exceed 230 MHz. As 32 bpp
|
||||
and (currently) 24 bit modes use a doubled vclk internally,
|
||||
the dotclock limit as seen by fbset is 115 MHz for those
|
||||
modes and 230 MHz for 8 and 16 bpp modes.
|
||||
- cyblafb will allow you to select very high resolutions as
|
||||
long as the hardware can be programmed to these modes. The
|
||||
documented limit 1600x1200 is not enforced, but don't expect
|
||||
perfect signal quality.
|
||||
|
||||
Any request that violates the rules given above will be either changed
|
||||
to something the hardware supports or an error value will be returned.
|
||||
|
||||
If you program a virtual y resolution higher than the hardware limit,
|
||||
cyblafb will silently decrease that value to the highest possible
|
||||
value. The same is true for a virtual x resolution that is not
|
||||
supported by the hardware. Cyblafb tries to adapt vyres first because
|
||||
vxres decides if ywrap scrolling is possible or not.
|
||||
|
||||
Attempts to disable acceleration are ignored, I believe that this is
|
||||
safe.
|
||||
|
||||
Some video modes that should work do not work as expected. If you use
|
||||
the standard fb.modes, fbset 640x480-60 will program that mode, but
|
||||
you will see a vertical area, about two characters wide, with only
|
||||
much darker characters than the other characters on the screen.
|
||||
Cyblafb does allow that mode to be set, as it does not violate the
|
||||
official specifications. It would need a lot of code to reliably sort
|
||||
out all invalid modes, playing around with the margin values will
|
||||
give a valid mode quickly. And if cyblafb would detect such an invalid
|
||||
mode, should it silently alter the requested values or should it
|
||||
report an error? Both options have some pros and cons. As stated
|
||||
above, none of the startup modes are affected, and if you set
|
||||
verbosity to 1 or higher, cyblafb will print the fbset command that
|
||||
would be needed to program that mode using fbset.
|
||||
|
||||
|
||||
Other Parameters
|
||||
================
|
||||
|
||||
|
||||
crt don't autodetect, assume monitor connected to
|
||||
standard VGA connector
|
||||
|
||||
fp don't autodetect, assume flat panel display
|
||||
connected to flat panel monitor interface
|
||||
|
||||
nativex inform driver about native x resolution of
|
||||
flat panel monitor connected to special
|
||||
interface (should be autodetected)
|
||||
|
||||
stretch stretch image to adapt low resolution modes to
|
||||
higer resolutions of flat panel monitors
|
||||
connected to special interface
|
||||
|
||||
center center image to adapt low resolution modes to
|
||||
higer resolutions of flat panel monitors
|
||||
connected to special interface
|
||||
|
||||
memsize use if autodetected memsize is wrong ...
|
||||
should never be necessary
|
||||
|
||||
nopcirr disable PCI read retry
|
||||
nopciwr disable PCI write retry
|
||||
nopcirb disable PCI read bursts
|
||||
nopciwb disable PCI write bursts
|
||||
|
||||
bpp bpp for specified modes
|
||||
valid values: 8 || 16 || 24 || 32
|
||||
|
||||
ref refresh rate for specified mode
|
||||
valid values: 50 <= ref <= 85
|
||||
|
||||
mode 640x480 or 800x600 or 1024x768 or 1280x1024
|
||||
if not specified, the startup mode will be detected
|
||||
and used, so you might also use the vga=??? parameter
|
||||
described in vesafb.txt. If you do not specify a mode,
|
||||
bpp and ref parameters are ignored.
|
||||
|
||||
verbosity 0 is the default, increase to at least 2 for every
|
||||
bug report!
|
||||
|
||||
Development hints
|
||||
=================
|
||||
|
||||
It's much faster do compile a module and to load the new version after
|
||||
unloading the old module than to compile a new kernel and to reboot. So if you
|
||||
try to work on cyblafb, it might be a good idea to use cyblafb as a module.
|
||||
In real life, fast often means dangerous, and that's also the case here. If
|
||||
you introduce a serious bug when cyblafb is compiled into the kernel, the
|
||||
kernel will lock or oops with a high probability before the file system is
|
||||
mounted, and the danger for your data is low. If you load a broken own version
|
||||
of cyblafb on a running system, the danger for the integrity of the file
|
||||
system is much higher as you might need a hard reset afterwards. Decide
|
||||
yourself.
|
||||
|
||||
Module unloading, the vfb method
|
||||
================================
|
||||
|
||||
If you want to unload/reload cyblafb using the virtual framebuffer, you need
|
||||
to enable vfb support in the kernel first. After that, load the modules as
|
||||
shown below:
|
||||
|
||||
modprobe vfb vfb_enable=1
|
||||
modprobe fbcon
|
||||
modprobe cyblafb
|
||||
fbset -fb /dev/fb1 1280x1024-60 -vyres 2662
|
||||
con2fb /dev/fb1 /dev/tty1
|
||||
...
|
||||
|
||||
If you now made some changes to cyblafb and want to reload it, you might do it
|
||||
as show below:
|
||||
|
||||
con2fb /dev/fb0 /dev/tty1
|
||||
...
|
||||
rmmod cyblafb
|
||||
modprobe cyblafb
|
||||
con2fb /dev/fb1 /dev/tty1
|
||||
...
|
||||
|
||||
Of course, you might choose another mode, and most certainly you also want to
|
||||
map some other /dev/tty* to the real framebuffer device. You might also choose
|
||||
to compile fbcon as a kernel module or place it permanently in the kernel.
|
||||
|
||||
I do not know of any way to unload fbcon, and fbcon will prevent the
|
||||
framebuffer device loaded first from unloading. [If there is a way, then
|
||||
please add a description here!]
|
||||
|
||||
Module unloading, the vesafb method
|
||||
===================================
|
||||
|
||||
Configure the kernel:
|
||||
|
||||
<*> Support for frame buffer devices
|
||||
[*] VESA VGA graphics support
|
||||
<M> Cyberblade/i1 support
|
||||
|
||||
Add e.g. "video=vesafb:ypan vga=0x307" to the kernel parameters. The ypan
|
||||
parameter is important, choose any vga parameter you like as long as it is
|
||||
a graphics mode.
|
||||
|
||||
After booting, load cyblafb without any mode and bpp parameter and assign
|
||||
cyblafb to individual ttys using con2fb, e.g.:
|
||||
|
||||
modprobe cyblafb
|
||||
con2fb /dev/fb1 /dev/tty1
|
||||
|
||||
Unloading cyblafb works without problems after you assign vesafb to all
|
||||
ttys again, e.g.:
|
||||
|
||||
con2fb /dev/fb0 /dev/tty1
|
||||
rmmod cyblafb
|
||||
|
|
@ -1,29 +0,0 @@
|
|||
0.62
|
||||
====
|
||||
|
||||
- the vesafb parameter has been removed as I decided to allow the
|
||||
feature without any special parameter.
|
||||
|
||||
- Cyblafb does not use the vga style of panning any longer, now the
|
||||
"right view" register in the graphics engine IO space is used. Without
|
||||
that change it was impossible to use all available memory, and without
|
||||
access to all available memory it is impossible to ywrap.
|
||||
|
||||
- The imageblit function now uses hardware acceleration for all font
|
||||
widths. Hardware blitting across pixel column 2048 is broken in the
|
||||
cyberblade/i1 graphics core, but we work around that hardware bug.
|
||||
|
||||
- modes with vxres != xres are supported now.
|
||||
|
||||
- ywrap scrolling is supported now and the default. This is a big
|
||||
performance gain.
|
||||
|
||||
- default video modes use vyres > yres and vxres > xres to allow
|
||||
almost optimal scrolling speed for normal and rotated screens
|
||||
|
||||
- some features mainly usefull for debugging the upper layers of the
|
||||
framebuffer system have been added, have a look at the code
|
||||
|
||||
- fixed: Oops after unloading cyblafb when reading /proc/io*
|
||||
|
||||
- we work around some bugs of the higher framebuffer layers.
|
||||
|
|
@ -1,85 +0,0 @@
|
|||
I tried the following framebuffer drivers:
|
||||
|
||||
- TRIDENTFB is full of bugs. Acceleration is broken for Blade3D
|
||||
graphics cores like the cyberblade/i1. It claims to support a great
|
||||
number of devices, but documentation for most of these devices is
|
||||
unfortunately not available. There is _no_ reason to use tridentfb
|
||||
for cyberblade/i1 + CRT users. VESAFB is faster, and the one
|
||||
advantage, mode switching, is broken in tridentfb.
|
||||
|
||||
- VESAFB is used by many distributions as a standard. Vesafb does
|
||||
not support mode switching. VESAFB is a bit faster than the working
|
||||
configurations of TRIDENTFB, but it is still too slow, even if you
|
||||
use ypan.
|
||||
|
||||
- EPIAFB (you'll find it on sourceforge) supports the Cyberblade/i1
|
||||
graphics core, but it still has serious bugs and developement seems
|
||||
to have stopped. This is the one driver with TV-out support. If you
|
||||
do need this feature, try epiafb.
|
||||
|
||||
None of these drivers was a real option for me.
|
||||
|
||||
I believe that is unreasonable to change code that announces to support 20
|
||||
devices if I only have more or less sufficient documentation for exactly one
|
||||
of these. The risk of breaking device foo while fixing device bar is too high.
|
||||
|
||||
So I decided to start CyBlaFB as a stripped down tridentfb.
|
||||
|
||||
All code specific to other Trident chips has been removed. After that there
|
||||
were a lot of cosmetic changes to increase the readability of the code. All
|
||||
register names were changed to those mnemonics used in the datasheet. Function
|
||||
and macro names were changed if they hindered easy understanding of the code.
|
||||
|
||||
After that I debugged the code and implemented some new features. I'll try to
|
||||
give a little summary of the main changes:
|
||||
|
||||
- calculation of vertical and horizontal timings was fixed
|
||||
|
||||
- video signal quality has been improved dramatically
|
||||
|
||||
- acceleration:
|
||||
|
||||
- fillrect and copyarea were fixed and reenabled
|
||||
|
||||
- color expanding imageblit was newly implemented, color
|
||||
imageblit (only used to draw the penguine) still uses the
|
||||
generic code.
|
||||
|
||||
- init of the acceleration engine was improved and moved to a
|
||||
place where it really works ...
|
||||
|
||||
- sync function has a timeout now and tries to reset and
|
||||
reinit the accel engine if necessary
|
||||
|
||||
- fewer slow copyarea calls when doing ypan scrolling by using
|
||||
undocumented bit d21 of screen start address stored in
|
||||
CR2B[5]. BIOS does use it also, so this should be safe.
|
||||
|
||||
- cyblafb rejects any attempt to set modes that would cause vclk
|
||||
values above reasonable 230 MHz. 32bit modes use a clock
|
||||
multiplicator of 2, so fbset does show the correct values for
|
||||
pixclock but not for vclk in this case. The fbset limit is 115 MHz
|
||||
for 32 bpp modes.
|
||||
|
||||
- cyblafb rejects modes known to be broken or unimplemented (all
|
||||
interlaced modes, all doublescan modes for now)
|
||||
|
||||
- cyblafb now works independant of the video mode in effect at startup
|
||||
time (tridentfb does not init all needed registers to reasonable
|
||||
values)
|
||||
|
||||
- switching between video modes does work reliably now
|
||||
|
||||
- the first video mode now is the one selected on startup using the
|
||||
vga=???? mechanism or any of
|
||||
- 640x480, 800x600, 1024x768, 1280x1024
|
||||
- 8, 16, 24 or 32 bpp
|
||||
- refresh between 50 Hz and 85 Hz, 1 Hz steps (1280x1024-32
|
||||
is limited to 63Hz)
|
||||
|
||||
- pci retry and pci burst mode are settable (try to disable if you
|
||||
experience latency problems)
|
||||
|
||||
- built as a module cyblafb might be unloaded and reloaded using
|
||||
the vfb module and con2vt or might be used together with vesafb
|
||||
|
||||
|
|
@ -1597,30 +1597,6 @@ config FB_VT8623
|
|||
Driver for CastleRock integrated graphics core in the
|
||||
VIA VT8623 [Apollo CLE266] chipset.
|
||||
|
||||
config FB_CYBLA
|
||||
tristate "Cyberblade/i1 support"
|
||||
depends on FB && PCI && X86_32 && !64BIT
|
||||
select FB_CFB_IMAGEBLIT
|
||||
---help---
|
||||
This driver is supposed to support the Trident Cyberblade/i1
|
||||
graphics core integrated in the VIA VT8601A North Bridge,
|
||||
also known as VIA Apollo PLE133.
|
||||
|
||||
Status:
|
||||
- Developed, tested and working on EPIA 5000 and EPIA 800.
|
||||
- Does work reliable on all systems with CRT/LCD connected to
|
||||
normal VGA ports.
|
||||
- Should work on systems that do use the internal LCD port, but
|
||||
this is absolutely not tested.
|
||||
|
||||
Character imageblit, copyarea and rectangle fill are hw accelerated,
|
||||
ypan scrolling is used by default.
|
||||
|
||||
Please do read <file:Documentation/fb/cyblafb/*>.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called cyblafb.
|
||||
|
||||
config FB_TRIDENT
|
||||
tristate "Trident support"
|
||||
depends on FB && PCI
|
||||
|
|
@ -1633,8 +1609,8 @@ config FB_TRIDENT
|
|||
and Blade XP.
|
||||
There are also integrated versions of these chips called CyberXXXX,
|
||||
CyberImage or CyberBlade. These chips are mostly found in laptops
|
||||
but also on some motherboards. For more information, read
|
||||
<file:Documentation/fb/tridentfb.txt>
|
||||
but also on some motherboards including early VIA EPIA motherboards.
|
||||
For more information, read <file:Documentation/fb/tridentfb.txt>
|
||||
|
||||
Say Y if you have such a graphics board.
|
||||
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -2,7 +2,7 @@
|
|||
* Frame buffer driver for Trident TGUI, Blade and Image series
|
||||
*
|
||||
* Copyright 2001, 2002 - Jani Monoses <jani@iv.ro>
|
||||
*
|
||||
* Copyright 2009 Krzysztof Helt <krzysztof.h1@wp.pl>
|
||||
*
|
||||
* CREDITS:(in order of appearance)
|
||||
* skeletonfb.c by Geert Uytterhoeven and other fb code in drivers/video
|
||||
|
|
@ -1490,6 +1490,9 @@ static int __devinit trident_pci_probe(struct pci_dev *dev,
|
|||
} else
|
||||
info->flags |= FBINFO_HWACCEL_DISABLED;
|
||||
|
||||
if (is_blade(chip_id) && chip_id != BLADE3D)
|
||||
info->flags |= FBINFO_READS_FAST;
|
||||
|
||||
info->pixmap.addr = kmalloc(4096, GFP_KERNEL);
|
||||
if (!info->pixmap.addr) {
|
||||
err = -ENOMEM;
|
||||
|
|
@ -1664,4 +1667,5 @@ module_exit(tridentfb_exit);
|
|||
MODULE_AUTHOR("Jani Monoses <jani@iv.ro>");
|
||||
MODULE_DESCRIPTION("Framebuffer driver for Trident cards");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("cyblafb");
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue