staging: fbtft: add fb_ssd1331 driver
This commit adds the fb_ssd1331 driver from the fbtft project at https://github.com/notro/fbtft. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Noralf Tronnes <notro@tronnes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Thomas Petazzoni
Greg Kroah-Hartman
parent
39837b9158
commit
dc74609102
|
|
@ -109,3 +109,9 @@ config FB_TFT_SSD1306
|
|||
depends on FB_TFT
|
||||
help
|
||||
Framebuffer support for SSD1306
|
||||
|
||||
config FB_TFT_SSD1331
|
||||
tristate "FB driver for the SSD1331 LCD Controller"
|
||||
depends on FB_TFT
|
||||
help
|
||||
Framebuffer support for SSD1331
|
||||
|
|
|
|||
|
|
@ -20,3 +20,4 @@ obj-$(CONFIG_FB_TFT_S6D02A1) += fb_s6d02a1.o
|
|||
obj-$(CONFIG_FB_TFT_S6D1121) += fb_s6d1121.o
|
||||
obj-$(CONFIG_FB_TFT_SSD1289) += fb_ssd1289.o
|
||||
obj-$(CONFIG_FB_TFT_SSD1306) += fb_ssd1306.o
|
||||
obj-$(CONFIG_FB_TFT_SSD1331) += fb_ssd1331.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,205 @@
|
|||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include "fbtft.h"
|
||||
|
||||
#define DRVNAME "fb_ssd1331"
|
||||
#define WIDTH 96
|
||||
#define HEIGHT 64
|
||||
#define GAMMA_NUM 1
|
||||
#define GAMMA_LEN 63
|
||||
#define DEFAULT_GAMMA "0 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2 2 " \
|
||||
"2 2 2 2 2 2 2" \
|
||||
|
||||
static int init_display(struct fbtft_par *par)
|
||||
{
|
||||
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
|
||||
|
||||
par->fbtftops.reset(par);
|
||||
|
||||
write_reg(par, 0xae); /* Display Off */
|
||||
write_reg(par, 0xa0, 0x70 | (par->bgr << 2)); /* Set Colour Depth */
|
||||
write_reg(par, 0x72); // RGB colour
|
||||
write_reg(par, 0xa1, 0x00); /* Set Display Start Line */
|
||||
write_reg(par, 0xa2, 0x00); /* Set Display Offset */
|
||||
write_reg(par, 0xa4); /* NORMALDISPLAY */
|
||||
write_reg(par, 0xa8, 0x3f); // Set multiplex
|
||||
write_reg(par, 0xad, 0x8e); // Set master
|
||||
// write_reg(par, 0xb0, 0x0b); // Set power mode
|
||||
write_reg(par, 0xb1, 0x31); // Precharge
|
||||
write_reg(par, 0xb3, 0xf0); // Clock div
|
||||
write_reg(par, 0x8a, 0x64); // Precharge A
|
||||
write_reg(par, 0x8b, 0x78); // Precharge B
|
||||
write_reg(par, 0x8c, 0x64); // Precharge C
|
||||
write_reg(par, 0xbb, 0x3a); // Precharge level
|
||||
write_reg(par, 0xbe, 0x3e); // vcomh
|
||||
write_reg(par, 0x87, 0x06); // Master current
|
||||
write_reg(par, 0x81, 0x91); // Contrast A
|
||||
write_reg(par, 0x82, 0x50); // Contrast B
|
||||
write_reg(par, 0x83, 0x7d); // Contrast C
|
||||
write_reg(par, 0xaf); /* Set Sleep Mode Display On */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye)
|
||||
{
|
||||
fbtft_par_dbg(DEBUG_SET_ADDR_WIN, par,
|
||||
"%s(xs=%d, ys=%d, xe=%d, ye=%d)\n", __func__, xs, ys, xe, ye);
|
||||
|
||||
write_reg(par, 0x15, xs, xe);
|
||||
write_reg(par, 0x75, ys, ye);
|
||||
}
|
||||
|
||||
static void write_reg8_bus8(struct fbtft_par *par, int len, ...)
|
||||
{
|
||||
va_list args;
|
||||
int i, ret;
|
||||
u8 *buf = (u8 *)par->buf;
|
||||
|
||||
if (unlikely(par->debug & DEBUG_WRITE_REGISTER)) {
|
||||
va_start(args, len);
|
||||
for (i = 0; i < len; i++) {
|
||||
buf[i] = (u8)va_arg(args, unsigned int);
|
||||
}
|
||||
va_end(args);
|
||||
fbtft_par_dbg_hex(DEBUG_WRITE_REGISTER, par, par->info->device, u8, buf, len, "%s: ", __func__);
|
||||
}
|
||||
|
||||
va_start(args, len);
|
||||
|
||||
*buf = (u8)va_arg(args, unsigned int);
|
||||
if (par->gpio.dc != -1)
|
||||
gpio_set_value(par->gpio.dc, 0);
|
||||
ret = par->fbtftops.write(par, par->buf, sizeof(u8));
|
||||
if (ret < 0) {
|
||||
va_end(args);
|
||||
dev_err(par->info->device, "%s: write() failed and returned %d\n", __func__, ret);
|
||||
return;
|
||||
}
|
||||
len--;
|
||||
|
||||
if (len) {
|
||||
i = len;
|
||||
while (i--) {
|
||||
*buf++ = (u8)va_arg(args, unsigned int);
|
||||
}
|
||||
ret = par->fbtftops.write(par, par->buf, len * (sizeof(u8)));
|
||||
if (ret < 0) {
|
||||
va_end(args);
|
||||
dev_err(par->info->device, "%s: write() failed and returned %d\n", __func__, ret);
|
||||
return;
|
||||
}
|
||||
}
|
||||
if (par->gpio.dc != -1)
|
||||
gpio_set_value(par->gpio.dc, 1);
|
||||
va_end(args);
|
||||
}
|
||||
|
||||
/*
|
||||
Grayscale Lookup Table
|
||||
GS1 - GS63
|
||||
The driver Gamma curve contains the relative values between the entries
|
||||
in the Lookup table.
|
||||
|
||||
From datasheet:
|
||||
8.8 Gray Scale Decoder
|
||||
|
||||
there are total 180 Gamma Settings (Setting 0 to Setting 180)
|
||||
available for the Gray Scale table.
|
||||
|
||||
The gray scale is defined in incremental way, with reference
|
||||
to the length of previous table entry:
|
||||
Setting of GS1 has to be >= 0
|
||||
Setting of GS2 has to be > Setting of GS1 +1
|
||||
Setting of GS3 has to be > Setting of GS2 +1
|
||||
:
|
||||
Setting of GS63 has to be > Setting of GS62 +1
|
||||
|
||||
|
||||
*/
|
||||
static int set_gamma(struct fbtft_par *par, unsigned long *curves)
|
||||
{
|
||||
unsigned long tmp[GAMMA_NUM * GAMMA_LEN];
|
||||
int i, acc = 0;
|
||||
|
||||
fbtft_par_dbg(DEBUG_INIT_DISPLAY, par, "%s()\n", __func__);
|
||||
|
||||
for (i = 0; i < 63; i++) {
|
||||
if (i > 0 && curves[i] < 2) {
|
||||
dev_err(par->info->device,
|
||||
"Illegal value in Grayscale Lookup Table at index %d. " \
|
||||
"Must be greater than 1\n", i);
|
||||
return -EINVAL;
|
||||
}
|
||||
acc += curves[i];
|
||||
tmp[i] = acc;
|
||||
if (acc > 180) {
|
||||
dev_err(par->info->device,
|
||||
"Illegal value(s) in Grayscale Lookup Table. " \
|
||||
"At index=%d, the accumulated value has exceeded 180\n", i);
|
||||
return -EINVAL;
|
||||
}
|
||||
}
|
||||
|
||||
write_reg(par, 0xB8,
|
||||
tmp[0], tmp[1], tmp[2], tmp[3], tmp[4], tmp[5], tmp[6], tmp[7],
|
||||
tmp[8], tmp[9], tmp[10], tmp[11], tmp[12], tmp[13], tmp[14], tmp[15],
|
||||
tmp[16], tmp[17], tmp[18], tmp[19], tmp[20], tmp[21], tmp[22], tmp[23],
|
||||
tmp[24], tmp[25], tmp[26], tmp[27], tmp[28], tmp[29], tmp[30], tmp[31],
|
||||
tmp[32], tmp[33], tmp[34], tmp[35], tmp[36], tmp[37], tmp[38], tmp[39],
|
||||
tmp[40], tmp[41], tmp[42], tmp[43], tmp[44], tmp[45], tmp[46], tmp[47],
|
||||
tmp[48], tmp[49], tmp[50], tmp[51], tmp[52], tmp[53], tmp[54], tmp[55],
|
||||
tmp[56], tmp[57], tmp[58], tmp[59], tmp[60], tmp[61], tmp[62]);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int blank(struct fbtft_par *par, bool on)
|
||||
{
|
||||
fbtft_par_dbg(DEBUG_BLANK, par, "%s(blank=%s)\n",
|
||||
__func__, on ? "true" : "false");
|
||||
if (on)
|
||||
write_reg(par, 0xAE);
|
||||
else
|
||||
write_reg(par, 0xAF);
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
||||
static struct fbtft_display display = {
|
||||
.regwidth = 8,
|
||||
.width = WIDTH,
|
||||
.height = HEIGHT,
|
||||
.gamma_num = GAMMA_NUM,
|
||||
.gamma_len = GAMMA_LEN,
|
||||
.gamma = DEFAULT_GAMMA,
|
||||
.fbtftops = {
|
||||
.write_register = write_reg8_bus8,
|
||||
.init_display = init_display,
|
||||
.set_addr_win = set_addr_win,
|
||||
.set_gamma = set_gamma,
|
||||
.blank = blank,
|
||||
},
|
||||
};
|
||||
|
||||
FBTFT_REGISTER_DRIVER(DRVNAME, "solomon,ssd1331", &display);
|
||||
|
||||
MODULE_ALIAS("spi:" DRVNAME);
|
||||
MODULE_ALIAS("platform:" DRVNAME);
|
||||
MODULE_ALIAS("spi:ssd1331");
|
||||
MODULE_ALIAS("platform:ssd1331");
|
||||
|
||||
MODULE_DESCRIPTION("SSD1331 OLED Driver");
|
||||
MODULE_AUTHOR("Alec Smecher (adapted from SSD1351 by James Davies)");
|
||||
MODULE_LICENSE("GPL");
|
||||
Loading…
Reference in New Issue