diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index a986e9bbba3d..bcebb9eaedce 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -160,7 +160,7 @@ Description: match the driver to the device. For example: # echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id -What: /sys/bus/usb/device/.../avoid_reset +What: /sys/bus/usb/device/.../avoid_reset_quirk Date: December 2009 Contact: Oliver Neukum Description: diff --git a/Documentation/PCI/PCI-DMA-mapping.txt b/Documentation/DMA-API-HOWTO.txt similarity index 100% rename from Documentation/PCI/PCI-DMA-mapping.txt rename to Documentation/DMA-API-HOWTO.txt diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index ba9975771503..ff3e5bec1c24 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -107,10 +107,6 @@ void (*dev_config) (struct ata_port *, struct ata_device *); issue of SET FEATURES - XFER MODE, and prior to operation. - Called by ata_device_add() after ata_dev_identify() determines - a device is present. - - This entry may be specified as NULL in ata_port_operations. @@ -154,8 +150,8 @@ unsigned int (*mode_filter) (struct ata_port *, struct ata_device *, unsigned in Taskfile read/write -void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); -void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf); @@ -164,36 +160,35 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); hardware registers / DMA buffers, to obtain the current set of taskfile register values. Most drivers for taskfile-based hardware (PIO or MMIO) use - ata_tf_load() and ata_tf_read() for these hooks. + ata_sff_tf_load() and ata_sff_tf_read() for these hooks. PIO data read/write -void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); +void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); All bmdma-style drivers must implement this hook. This is the low-level operation that actually copies the data bytes during a PIO data transfer. -Typically the driver -will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or -ata_mmio_data_xfer(). +Typically the driver will choose one of ata_sff_data_xfer_noirq(), +ata_sff_data_xfer(), or ata_sff_data_xfer32(). ATA command execute -void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf); causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. - Most drivers for taskfile-based hardware use ata_exec_command() + Most drivers for taskfile-based hardware use ata_sff_exec_command() for this hook. @@ -218,8 +213,8 @@ command. Read specific ATA shadow registers -u8 (*check_status)(struct ata_port *ap); -u8 (*check_altstatus)(struct ata_port *ap); +u8 (*sff_check_status)(struct ata_port *ap); +u8 (*sff_check_altstatus)(struct ata_port *ap); @@ -227,20 +222,14 @@ u8 (*check_altstatus)(struct ata_port *ap); hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use - ata_check_status() for this hook. - - - Note that because this is called from ata_device_add(), at - least a dummy function that clears device interrupts must be - provided for all drivers, even if the controller doesn't - actually have a taskfile status register. + ata_sff_check_status() for this hook. Select ATA device on bus -void (*dev_select)(struct ata_port *ap, unsigned int device); +void (*sff_dev_select)(struct ata_port *ap, unsigned int device); @@ -251,9 +240,7 @@ void (*dev_select)(struct ata_port *ap, unsigned int device); Most drivers for taskfile-based hardware use - ata_std_dev_select() for this hook. Controllers which do not - support second drives on a port (such as SATA contollers) will - use ata_noop_dev_select(). + ata_sff_dev_select() for this hook. @@ -441,13 +428,13 @@ void (*irq_clear) (struct ata_port *); to struct ata_host_set. - Most legacy IDE drivers use ata_interrupt() for the + Most legacy IDE drivers use ata_sff_interrupt() for the irq_handler hook, which scans all ports in the host_set, determines which queued command was active (if any), and calls - ata_host_intr(ap,qc). + ata_sff_host_intr(ap,qc). - Most legacy IDE drivers use ata_bmdma_irq_clear() for the + Most legacy IDE drivers use ata_sff_irq_clear() for the irq_clear() hook, which simply clears the interrupt and error flags in the DMA status register. @@ -496,10 +483,6 @@ void (*host_stop) (struct ata_host_set *host_set); data from port at this time. - Many drivers use ata_port_stop() as this hook, which frees the - PRD table. - - ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. diff --git a/Documentation/DocBook/tracepoint.tmpl b/Documentation/DocBook/tracepoint.tmpl index 8bca1d5cec09..e8473eae2a20 100644 --- a/Documentation/DocBook/tracepoint.tmpl +++ b/Documentation/DocBook/tracepoint.tmpl @@ -16,6 +16,15 @@ + + William + Cohen + +
+ wcohen@redhat.com +
+ + @@ -91,4 +100,8 @@ !Iinclude/trace/events/signal.h + + Block IO +!Iinclude/trace/events/block.h + diff --git a/Documentation/HOWTO b/Documentation/HOWTO index f5395af88a41..40ada93b820a 100644 --- a/Documentation/HOWTO +++ b/Documentation/HOWTO @@ -234,7 +234,7 @@ process is as follows: Linus, usually the patches that have already been included in the -next kernel for a few weeks. The preferred way to submit big changes is using git (the kernel's source management tool, more information - can be found at http://git.or.cz/) but plain patches are also just + can be found at http://git-scm.com/) but plain patches are also just fine. - After two weeks a -rc1 kernel is released it is now possible to push only patches that do not include new features that could affect the diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt index a6d32e65d222..a8536cb88091 100644 --- a/Documentation/RCU/NMI-RCU.txt +++ b/Documentation/RCU/NMI-RCU.txt @@ -34,7 +34,7 @@ NMI handler. cpu = smp_processor_id(); ++nmi_count(cpu); - if (!rcu_dereference(nmi_callback)(regs, cpu)) + if (!rcu_dereference_sched(nmi_callback)(regs, cpu)) default_do_nmi(regs); nmi_exit(); @@ -47,12 +47,13 @@ function pointer. If this handler returns zero, do_nmi() invokes the default_do_nmi() function to handle a machine-specific NMI. Finally, preemption is restored. -Strictly speaking, rcu_dereference() is not needed, since this code runs -only on i386, which does not need rcu_dereference() anyway. However, -it is a good documentation aid, particularly for anyone attempting to -do something similar on Alpha. +In theory, rcu_dereference_sched() is not needed, since this code runs +only on i386, which in theory does not need rcu_dereference_sched() +anyway. However, in practice it is a good documentation aid, particularly +for anyone attempting to do something similar on Alpha or on systems +with aggressive optimizing compilers. -Quick Quiz: Why might the rcu_dereference() be necessary on Alpha, +Quick Quiz: Why might the rcu_dereference_sched() be necessary on Alpha, given that the code referenced by the pointer is read-only? @@ -99,17 +100,21 @@ invoke irq_enter() and irq_exit() on NMI entry and exit, respectively. Answer to Quick Quiz - Why might the rcu_dereference() be necessary on Alpha, given + Why might the rcu_dereference_sched() be necessary on Alpha, given that the code referenced by the pointer is read-only? Answer: The caller to set_nmi_callback() might well have - initialized some data that is to be used by the - new NMI handler. In this case, the rcu_dereference() - would be needed, because otherwise a CPU that received - an NMI just after the new handler was set might see - the pointer to the new NMI handler, but the old - pre-initialized version of the handler's data. + initialized some data that is to be used by the new NMI + handler. In this case, the rcu_dereference_sched() would + be needed, because otherwise a CPU that received an NMI + just after the new handler was set might see the pointer + to the new NMI handler, but the old pre-initialized + version of the handler's data. - More important, the rcu_dereference() makes it clear - to someone reading the code that the pointer is being - protected by RCU. + This same sad story can happen on other CPUs when using + a compiler with aggressive pointer-value speculation + optimizations. + + More important, the rcu_dereference_sched() makes it + clear to someone reading the code that the pointer is + being protected by RCU-sched. diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index cbc180f90194..790d1a812376 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -260,7 +260,8 @@ over a rather long period of time, but improvements are always welcome! The reason that it is permissible to use RCU list-traversal primitives when the update-side lock is held is that doing so can be quite helpful in reducing code bloat when common code is - shared between readers and updaters. + shared between readers and updaters. Additional primitives + are provided for this case, as discussed in lockdep.txt. 10. Conversely, if you are in an RCU read-side critical section, and you don't hold the appropriate update-side lock, you -must- @@ -344,8 +345,8 @@ over a rather long period of time, but improvements are always welcome! requiring SRCU's read-side deadlock immunity or low read-side realtime latency. - Note that, rcu_assign_pointer() and rcu_dereference() relate to - SRCU just as they do to other forms of RCU. + Note that, rcu_assign_pointer() relates to SRCU just as they do + to other forms of RCU. 15. The whole point of call_rcu(), synchronize_rcu(), and friends is to wait until all pre-existing readers have finished before diff --git a/Documentation/RCU/lockdep.txt b/Documentation/RCU/lockdep.txt index fe24b58627bd..d7a49b2f6994 100644 --- a/Documentation/RCU/lockdep.txt +++ b/Documentation/RCU/lockdep.txt @@ -32,9 +32,20 @@ checking of rcu_dereference() primitives: srcu_dereference(p, sp): Check for SRCU read-side critical section. rcu_dereference_check(p, c): - Use explicit check expression "c". + Use explicit check expression "c". This is useful in + code that is invoked by both readers and updaters. rcu_dereference_raw(p) Don't check. (Use sparingly, if at all.) + rcu_dereference_protected(p, c): + Use explicit check expression "c", and omit all barriers + and compiler constraints. This is useful when the data + structure cannot change, for example, in code that is + invoked only by updaters. + rcu_access_pointer(p): + Return the value of the pointer and omit all barriers, + but retain the compiler constraints that prevent duplicating + or coalescsing. This is useful when when testing the + value of the pointer itself, for example, against NULL. The rcu_dereference_check() check expression can be any boolean expression, but would normally include one of the rcu_read_lock_held() @@ -59,7 +70,20 @@ In case (1), the pointer is picked up in an RCU-safe manner for vanilla RCU read-side critical sections, in case (2) the ->file_lock prevents any change from taking place, and finally, in case (3) the current task is the only task accessing the file_struct, again preventing any change -from taking place. +from taking place. If the above statement was invoked only from updater +code, it could instead be written as follows: + + file = rcu_dereference_protected(fdt->fd[fd], + lockdep_is_held(&files->file_lock) || + atomic_read(&files->count) == 1); + +This would verify cases #2 and #3 above, and furthermore lockdep would +complain if this was used in an RCU read-side critical section unless one +of these two cases held. Because rcu_dereference_protected() omits all +barriers and compiler constraints, it generates better code than do the +other flavors of rcu_dereference(). On the other hand, it is illegal +to use rcu_dereference_protected() if either the RCU-protected pointer +or the RCU-protected data that it points to can change concurrently. There are currently only "universal" versions of the rcu_assign_pointer() and RCU list-/tree-traversal primitives, which do not (yet) check for diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 1dc00ee97163..cfaac34c4557 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -840,6 +840,12 @@ SRCU: Initialization/cleanup init_srcu_struct cleanup_srcu_struct +All: lockdep-checked RCU-protected pointer access + + rcu_dereference_check + rcu_dereference_protected + rcu_access_pointer + See the comment headers in the source code (or the docbook generated from them) for more information. diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index 6fab97ea7e6b..508b5b2b0289 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -1162,8 +1162,8 @@ where a driver received a request ala this before: As mentioned, there is no virtual mapping of a bio. For DMA, this is not a problem as the driver probably never will need a virtual mapping. -Instead it needs a bus mapping (pci_map_page for a single segment or -use blk_rq_map_sg for scatter gather) to be able to ship it to the driver. For +Instead it needs a bus mapping (dma_map_page for a single segment or +use dma_map_sg for scatter gather) to be able to ship it to the driver. For PIO drivers (or drivers that need to revert to PIO transfer once in a while (IDE for example)), where the CPU is doing the actual data transfer a virtual mapping is needed. If the driver supports highmem I/O, diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index fd588ff0e296..a1ca5924faff 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -235,8 +235,7 @@ containing the following files describing that cgroup: - cgroup.procs: list of tgids in the cgroup. This list is not guaranteed to be sorted or free of duplicate tgids, and userspace should sort/uniquify the list if this property is required. - Writing a tgid into this file moves all threads with that tgid into - this cgroup. + This is a read-only file, for now. - notify_on_release flag: run the release agent on exit? - release_agent: the path to use for release notifications (this file exists in the top cgroup only) diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index f8bc802d70b9..3a6aecd078ba 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -340,7 +340,7 @@ Note: 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. - Following cgroups' swapiness can't be changed. + Following cgroups' swappiness can't be changed. - root cgroup (uses /proc/sys/vm/swappiness). - a cgroup which uses hierarchy and it has child cgroup. - a cgroup which uses hierarchy and not the root of hierarchy. diff --git a/Documentation/circular-buffers.txt b/Documentation/circular-buffers.txt new file mode 100644 index 000000000000..8117e5bf6065 --- /dev/null +++ b/Documentation/circular-buffers.txt @@ -0,0 +1,234 @@ + ================ + CIRCULAR BUFFERS + ================ + +By: David Howells + Paul E. McKenney + + +Linux provides a number of features that can be used to implement circular +buffering. There are two sets of such features: + + (1) Convenience functions for determining information about power-of-2 sized + buffers. + + (2) Memory barriers for when the producer and the consumer of objects in the + buffer don't want to share a lock. + +To use these facilities, as discussed below, there needs to be just one +producer and just one consumer. It is possible to handle multiple producers by +serialising them, and to handle multiple consumers by serialising them. + + +Contents: + + (*) What is a circular buffer? + + (*) Measuring power-of-2 buffers. + + (*) Using memory barriers with circular buffers. + - The producer. + - The consumer. + + +========================== +WHAT IS A CIRCULAR BUFFER? +========================== + +First of all, what is a circular buffer? A circular buffer is a buffer of +fixed, finite size into which there are two indices: + + (1) A 'head' index - the point at which the producer inserts items into the + buffer. + + (2) A 'tail' index - the point at which the consumer finds the next item in + the buffer. + +Typically when the tail pointer is equal to the head pointer, the buffer is +empty; and the buffer is full when the head pointer is one less than the tail +pointer. + +The head index is incremented when items are added, and the tail index when +items are removed. The tail index should never jump the head index, and both +indices should be wrapped to 0 when they reach the end of the buffer, thus +allowing an infinite amount of data to flow through the buffer. + +Typically, items will all be of the same unit size, but this isn't strictly +required to use the techniques below. The indices can be increased by more +than 1 if multiple items or variable-sized items are to be included in the +buffer, provided that neither index overtakes the other. The implementer must +be careful, however, as a region more than one unit in size may wrap the end of +the buffer and be broken into two segments. + + +============================ +MEASURING POWER-OF-2 BUFFERS +============================ + +Calculation of the occupancy or the remaining capacity of an arbitrarily sized +circular buffer would normally be a slow operation, requiring the use of a +modulus (divide) instruction. However, if the buffer is of a power-of-2 size, +then a much quicker bitwise-AND instruction can be used instead. + +Linux provides a set of macros for handling power-of-2 circular buffers. These +can be made use of by: + + #include + +The macros are: + + (*) Measure the remaining capacity of a buffer: + + CIRC_SPACE(head_index, tail_index, buffer_size); + + This returns the amount of space left in the buffer[1] into which items + can be inserted. + + + (*) Measure the maximum consecutive immediate space in a buffer: + + CIRC_SPACE_TO_END(head_index, tail_index, buffer_size); + + This returns the amount of consecutive space left in the buffer[1] into + which items can be immediately inserted without having to wrap back to the + beginning of the buffer. + + + (*) Measure the occupancy of a buffer: + + CIRC_CNT(head_index, tail_index, buffer_size); + + This returns the number of items currently occupying a buffer[2]. + + + (*) Measure the non-wrapping occupancy of a buffer: + + CIRC_CNT_TO_END(head_index, tail_index, buffer_size); + + This returns the number of consecutive items[2] that can be extracted from + the buffer without having to wrap back to the beginning of the buffer. + + +Each of these macros will nominally return a value between 0 and buffer_size-1, +however: + + [1] CIRC_SPACE*() are intended to be used in the producer. To the producer + they will return a lower bound as the producer controls the head index, + but the consumer may still be depleting the buffer on another CPU and + moving the tail index. + + To the consumer it will show an upper bound as the producer may be busy + depleting the space. + + [2] CIRC_CNT*() are intended to be used in the consumer. To the consumer they + will return a lower bound as the consumer controls the tail index, but the + producer may still be filling the buffer on another CPU and moving the + head index. + + To the producer it will show an upper bound as the consumer may be busy + emptying the buffer. + + [3] To a third party, the order in which the writes to the indices by the + producer and consumer become visible cannot be guaranteed as they are + independent and may be made on different CPUs - so the result in such a + situation will merely be a guess, and may even be negative. + + +=========================================== +USING MEMORY BARRIERS WITH CIRCULAR BUFFERS +=========================================== + +By using memory barriers in conjunction with circular buffers, you can avoid +the need to: + + (1) use a single lock to govern access to both ends of the buffer, thus + allowing the buffer to be filled and emptied at the same time; and + + (2) use atomic counter operations. + +There are two sides to this: the producer that fills the buffer, and the +consumer that empties it. Only one thing should be filling a buffer at any one +time, and only one thing should be emptying a buffer at any one time, but the +two sides can operate simultaneously. + + +THE PRODUCER +------------ + +The producer will look something like this: + + spin_lock(&producer_lock); + + unsigned long head = buffer->head; + unsigned long tail = ACCESS_ONCE(buffer->tail); + + if (CIRC_SPACE(head, tail, buffer->size) >= 1) { + /* insert one item into the buffer */ + struct item *item = buffer[head]; + + produce_item(item); + + smp_wmb(); /* commit the item before incrementing the head */ + + buffer->head = (head + 1) & (buffer->size - 1); + + /* wake_up() will make sure that the head is committed before + * waking anyone up */ + wake_up(consumer); + } + + spin_unlock(&producer_lock); + +This will instruct the CPU that the contents of the new item must be written +before the head index makes it available to the consumer and then instructs the +CPU that the revised head index must be written before the consumer is woken. + +Note that wake_up() doesn't have to be the exact mechanism used, but whatever +is used must guarantee a (write) memory barrier between the update of the head +index and the change of state of the consumer, if a change of state occurs. + + +THE CONSUMER +------------ + +The consumer will look something like this: + + spin_lock(&consumer_lock); + + unsigned long head = ACCESS_ONCE(buffer->head); + unsigned long tail = buffer->tail; + + if (CIRC_CNT(head, tail, buffer->size) >= 1) { + /* read index before reading contents at that index */ + smp_read_barrier_depends(); + + /* extract one item from the buffer */ + struct item *item = buffer[tail]; + + consume_item(item); + + smp_mb(); /* finish reading descriptor before incrementing tail */ + + buffer->tail = (tail + 1) & (buffer->size - 1); + } + + spin_unlock(&consumer_lock); + +This will instruct the CPU to make sure the index is up to date before reading +the new item, and then it shall make sure the CPU has finished reading the item +before it writes the new tail pointer, which will erase the item. + + +Note the use of ACCESS_ONCE() in both algorithms to read the opposition index. +This prevents the compiler from discarding and reloading its cached value - +which some compilers will do across smp_read_barrier_depends(). This isn't +strictly needed if you can be sure that the opposition index will _only_ be +used the once. + + +=============== +FURTHER READING +=============== + +See also Documentation/memory-barriers.txt for a description of Linux's memory +barrier facilities. diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index b07add3467f1..7764594778d4 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include diff --git a/Documentation/fb/imacfb.txt b/Documentation/fb/efifb.txt similarity index 66% rename from Documentation/fb/imacfb.txt rename to Documentation/fb/efifb.txt index 316ec9bb7deb..a59916c29b33 100644 --- a/Documentation/fb/imacfb.txt +++ b/Documentation/fb/efifb.txt @@ -1,9 +1,9 @@ -What is imacfb? +What is efifb? =============== This is a generic EFI platform driver for Intel based Apple computers. -Imacfb is only for EFI booted Intel Macs. +efifb is only for EFI booted Intel Macs. Supported Hardware ================== @@ -16,16 +16,16 @@ MacMini How to use it? ============== -Imacfb does not have any kind of autodetection of your machine. +efifb does not have any kind of autodetection of your machine. You have to add the following kernel parameters in your elilo.conf: Macbook : - video=imacfb:macbook + video=efifb:macbook MacMini : - video=imacfb:mini + video=efifb:mini Macbook Pro 15", iMac 17" : - video=imacfb:i17 + video=efifb:i17 Macbook Pro 17", iMac 20" : - video=imacfb:i20 + video=efifb:i20 -- Edgar Hucek diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 8f8e4241bd90..b93b7810c8bd 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -599,3 +599,26 @@ Why: Useful in 2003, implementation is a hack. Generally invoked by accident today. Seen as doing more harm than good. Who: Len Brown + +---------------------------- + +What: video4linux /dev/vtx teletext API support +When: 2.6.35 +Files: drivers/media/video/saa5246a.c drivers/media/video/saa5249.c + include/linux/videotext.h +Why: The vtx device nodes have been superseded by vbi device nodes + for many years. No applications exist that use the vtx support. + Of the two i2c drivers that actually support this API the saa5249 + has been impossible to use for a year now and no known hardware + that supports this device exists. The saa5246a is theoretically + supported by the old mxb boards, but it never actually worked. + + In summary: there is no hardware that can use this API and there + are no applications actually implementing this API. + + The vtx support still reserves minors 192-223 and we would really + like to reuse those for upcoming new functionality. In the unlikely + event that new hardware appears that wants to use the functionality + provided by the vtx API, then that functionality should be build + around the sliced VBI API instead. +Who: Hans Verkuil diff --git a/Documentation/filesystems/00-INDEX b/Documentation/filesystems/00-INDEX index 3bae418c6ad3..4303614b5add 100644 --- a/Documentation/filesystems/00-INDEX +++ b/Documentation/filesystems/00-INDEX @@ -16,6 +16,8 @@ befs.txt - information about the BeOS filesystem for Linux. bfs.txt - info for the SCO UnixWare Boot Filesystem (BFS). +ceph.txt + - info for the Ceph Distributed File System cifs.txt - description of the CIFS filesystem. coda.txt diff --git a/Documentation/filesystems/9p.txt b/Documentation/filesystems/9p.txt index 57e0b80a5274..c0236e753bc8 100644 --- a/Documentation/filesystems/9p.txt +++ b/Documentation/filesystems/9p.txt @@ -37,6 +37,15 @@ For Plan 9 From User Space applications (http://swtch.com/plan9) mount -t 9p `namespace`/acme /mnt/9 -o trans=unix,uname=$USER +For server running on QEMU host with virtio transport: + + mount -t 9p -o trans=virtio /mnt/9 + +where mount_tag is the tag associated by the server to each of the exported +mount points. Each 9P export is seen by the client as a virtio device with an +associated "mount_tag" property. Available mount tags can be +seen by reading /sys/bus/virtio/drivers/9pnet_virtio/virtio/mount_tag files. + OPTIONS ======= @@ -47,7 +56,7 @@ OPTIONS fd - used passed file descriptors for connection (see rfdno and wfdno) virtio - connect to the next virtio channel available - (from lguest or KVM with trans_virtio module) + (from QEMU with trans_virtio module) rdma - connect to a specified RDMA channel uname=name user name to attempt mount as on the remote server. The @@ -85,7 +94,12 @@ OPTIONS port=n port to connect to on the remote server - noextend force legacy mode (no 9p2000.u semantics) + noextend force legacy mode (no 9p2000.u or 9p2000.L semantics) + + version=name Select 9P protocol version. Valid options are: + 9p2000 - Legacy mode (same as noextend) + 9p2000.u - Use 9P2000.u protocol + 9p2000.L - Use 9P2000.L protocol dfltuid attempt to mount as a particular uid diff --git a/Documentation/filesystems/ceph.txt b/Documentation/filesystems/ceph.txt new file mode 100644 index 000000000000..0660c9f5deef --- /dev/null +++ b/Documentation/filesystems/ceph.txt @@ -0,0 +1,140 @@ +Ceph Distributed File System +============================ + +Ceph is a distributed network file system designed to provide good +performance, reliability, and scalability. + +Basic features include: + + * POSIX semantics + * Seamless scaling from 1 to many thousands of nodes + * High availability and reliability. No single point of failure. + * N-way replication of data across storage nodes + * Fast recovery from node failures + * Automatic rebalancing of data on node addition/removal + * Easy deployment: most FS components are userspace daemons + +Also, + * Flexible snapshots (on any directory) + * Recursive accounting (nested files, directories, bytes) + +In contrast to cluster filesystems like GFS, OCFS2, and GPFS that rely +on symmetric access by all clients to shared block devices, Ceph +separates data and metadata management into independent server +clusters, similar to Lustre. Unlike Lustre, however, metadata and +storage nodes run entirely as user space daemons. Storage nodes +utilize btrfs to store data objects, leveraging its advanced features +(checksumming, metadata replication, etc.). File data is striped +across storage nodes in large chunks to distribute workload and +facilitate high throughputs. When storage nodes fail, data is +re-replicated in a distributed fashion by the storage nodes themselves +(with some minimal coordination from a cluster monitor), making the +system extremely efficient and scalable. + +Metadata servers effectively form a large, consistent, distributed +in-memory cache above the file namespace that is extremely scalable, +dynamically redistributes metadata in response to workload changes, +and can tolerate arbitrary (well, non-Byzantine) node failures. The +metadata server takes a somewhat unconventional approach to metadata +storage to significantly improve performance for common workloads. In +particular, inodes with only a single link are embedded in +directories, allowing entire directories of dentries and inodes to be +loaded into its cache with a single I/O operation. The contents of +extremely large directories can be fragmented and managed by +independent metadata servers, allowing scalable concurrent access. + +The system offers automatic data rebalancing/migration when scaling +from a small cluster of just a few nodes to many hundreds, without +requiring an administrator carve the data set into static volumes or +go through the tedious process of migrating data between servers. +When the file system approaches full, new nodes can be easily added +and things will "just work." + +Ceph includes flexible snapshot mechanism that allows a user to create +a snapshot on any subdirectory (and its nested contents) in the +system. Snapshot creation and deletion are as simple as 'mkdir +.snap/foo' and 'rmdir .snap/foo'. + +Ceph also provides some recursive accounting on directories for nested +files and bytes. That is, a 'getfattr -d foo' on any directory in the +system will reveal the total number of nested regular files and +subdirectories, and a summation of all nested file sizes. This makes +the identification of large disk space consumers relatively quick, as +no 'du' or similar recursive scan of the file system is required. + + +Mount Syntax +============ + +The basic mount syntax is: + + # mount -t ceph monip[:port][,monip2[:port]...]:/[subdir] mnt + +You only need to specify a single monitor, as the client will get the +full list when it connects. (However, if the monitor you specify +happens to be down, the mount won't succeed.) The port can be left +off if the monitor is using the default. So if the monitor is at +1.2.3.4, + + # mount -t ceph 1.2.3.4:/ /mnt/ceph + +is sufficient. If /sbin/mount.ceph is installed, a hostname can be +used instead of an IP address. + + + +Mount Options +============= + + ip=A.B.C.D[:N] + Specify the IP and/or port the client should bind to locally. + There is normally not much reason to do this. If the IP is not + specified, the client's IP address is determined by looking at the + address it's connection to the monitor originates from. + + wsize=X + Specify the maximum write size in bytes. By default there is no + maximum. Ceph will normally size writes based on the file stripe + size. + + rsize=X + Specify the maximum readahead. + + mount_timeout=X + Specify the timeout value for mount (in seconds), in the case + of a non-responsive Ceph file system. The default is 30 + seconds. + + rbytes + When stat() is called on a directory, set st_size to 'rbytes', + the summation of file sizes over all files nested beneath that + directory. This is the default. + + norbytes + When stat() is called on a directory, set st_size to the + number of entries in that directory. + + nocrc + Disable CRC32C calculation for data writes. If set, the storage node + must rely on TCP's error correction to detect data corruption + in the data payload. + + noasyncreaddir + Disable client's use its local cache to satisfy readdir + requests. (This does not change correctness; the client uses + cached metadata only when a lease or capability ensures it is + valid.) + + +More Information +================ + +For more information on Ceph, see the home page at + http://ceph.newdream.net/ + +The Linux kernel client source tree is available at + git://ceph.newdream.net/git/ceph-client.git + git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git + +and the source for the full system is at + git://ceph.newdream.net/git/ceph.git diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt index 3015da0c6b2a..fe09a2cb1858 100644 --- a/Documentation/filesystems/tmpfs.txt +++ b/Documentation/filesystems/tmpfs.txt @@ -82,11 +82,13 @@ tmpfs has a mount option to set the NUMA memory allocation policy for all files in that instance (if CONFIG_NUMA is enabled) - which can be adjusted on the fly via 'mount -o remount ...' -mpol=default prefers to allocate memory from the local node +mpol=default use the process allocation policy + (see set_mempolicy(2)) mpol=prefer:Node prefers to allocate memory from the given Node mpol=bind:NodeList allocates memory only from nodes in NodeList mpol=interleave prefers to allocate from each node in turn mpol=interleave:NodeList allocates from each node of NodeList in turn +mpol=local prefers to allocate memory from the local node NodeList format is a comma-separated list of decimal numbers and ranges, a range being two hyphen-separated decimal numbers, the smallest and @@ -134,3 +136,5 @@ Author: Christoph Rohland , 1.12.01 Updated: Hugh Dickins, 4 June 2007 +Updated: + KOSAKI Motohiro, 16 Mar 2010 diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 3219ee0dbfef..5ebf5af1d716 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -74,6 +74,11 @@ structure at all. You should use this to keep device-specific data. /* retrieve the value */ void *i2c_get_clientdata(const struct i2c_client *client); +Note that starting with kernel 2.6.34, you don't have to set the `data' field +to NULL in remove() or if probe() failed anymore. The i2c-core does this +automatically on these occasions. Those are also the only times the core will +touch this field. + Accessing the client ==================== diff --git a/Documentation/input/elantech.txt b/Documentation/input/elantech.txt index a10c3b6ba7c4..56941ae1f5db 100644 --- a/Documentation/input/elantech.txt +++ b/Documentation/input/elantech.txt @@ -333,14 +333,14 @@ byte 0: byte 1: bit 7 6 5 4 3 2 1 0 - x15 x14 x13 x12 x11 x10 x9 x8 + . . . . . x10 x9 x8 byte 2: bit 7 6 5 4 3 2 1 0 x7 x6 x5 x4 x4 x2 x1 x0 - x15..x0 = absolute x value (horizontal) + x10..x0 = absolute x value (horizontal) byte 3: @@ -350,14 +350,14 @@ byte 3: byte 4: bit 7 6 5 4 3 2 1 0 - y15 y14 y13 y12 y11 y10 y8 y8 + . . . . . . y9 y8 byte 5: bit 7 6 5 4 3 2 1 0 y7 y6 y5 y4 y3 y2 y1 y0 - y15..y0 = absolute y value (vertical) + y9..y0 = absolute y value (vertical) 4.2.2 Two finger touch diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt index 8490480ce432..c0fc1c75fd88 100644 --- a/Documentation/input/multi-touch-protocol.txt +++ b/Documentation/input/multi-touch-protocol.txt @@ -68,6 +68,22 @@ like: SYN_MT_REPORT SYN_REPORT +Here is the sequence after lifting one of the fingers: + + ABS_MT_POSITION_X + ABS_MT_POSITION_Y + SYN_MT_REPORT + SYN_REPORT + +And here is the sequence after lifting the remaining finger: + + SYN_MT_REPORT + SYN_REPORT + +If the driver reports one of BTN_TOUCH or ABS_PRESSURE in addition to the +ABS_MT events, the last SYN_MT_REPORT event may be omitted. Otherwise, the +last SYN_REPORT will be dropped by the input core, resulting in no +zero-finger event reaching userland. Event Semantics --------------- @@ -217,11 +233,6 @@ where examples can be found. difference between the contact position and the approaching tool position could be used to derive tilt. [2] The list can of course be extended. -[3] The multi-touch X driver is currently in the prototyping stage. At the -time of writing (April 2009), the MT protocol is not yet merged, and the -prototype implements finger matching, basic mouse support and two-finger -scrolling. The project aims at improving the quality of current multi-touch -functionality available in the Synaptics X driver, and in addition -implement more advanced gestures. +[3] Multitouch X driver project: http://bitmath.org/code/multitouch/. [4] See the section on event computation. [5] See the section on finger tracking. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 35c9b51d20ea..dd5806f4fcc4 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -291,6 +291,7 @@ Code Seq#(hex) Include File Comments 0x92 00-0F drivers/usb/mon/mon_bin.c 0x93 60-7F linux/auto_fs.h 0x94 all fs/btrfs/ioctl.h +0x97 00-7F fs/ceph/ioctl.h Ceph file system 0x99 00-0F 537-Addinboard driver 0xA0 all linux/sdp/sdp.h Industrial Device Project diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e4cbca58536c..839b21b0699a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -320,11 +320,6 @@ and is between 256 and 4096 characters. It is defined in the file amd_iommu= [HW,X86-84] Pass parameters to the AMD IOMMU driver in the system. Possible values are: - isolate - enable device isolation (each device, as far - as possible, will get its own protection - domain) [default] - share - put every device behind one IOMMU into the - same protection domain fullflush - enable flushing of IO/TLB entries when they are unmapped. Otherwise they are flushed before they will be reused, which @@ -1199,7 +1194,7 @@ and is between 256 and 4096 characters. It is defined in the file libata.force= [LIBATA] Force configurations. The format is comma separated list of "[ID:]VAL" where ID is - PORT[:DEVICE]. PORT and DEVICE are decimal numbers + PORT[.DEVICE]. PORT and DEVICE are decimal numbers matching port, link or device. Basically, it matches the ATA ID string printed on console by libata. If the whole ID part is omitted, the last PORT and DEVICE diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index bdb13817e1e9..3ab2472509cb 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -59,37 +59,56 @@ nice to have in other objects. The C language does not allow for the direct expression of inheritance, so other techniques - such as structure embedding - must be used. -So, for example, the UIO code has a structure that defines the memory -region associated with a uio device: +(As an aside, for those familiar with the kernel linked list implementation, +this is analogous as to how "list_head" structs are rarely useful on +their own, but are invariably found embedded in the larger objects of +interest.) -struct uio_mem { +So, for example, the UIO code in drivers/uio/uio.c has a structure that +defines the memory region associated with a uio device: + + struct uio_map { struct kobject kobj; - unsigned long addr; - unsigned long size; - int memtype; - void __iomem *internal_addr; -}; + struct uio_mem *mem; + }; -If you have a struct uio_mem structure, finding its embedded kobject is +If you have a struct uio_map structure, finding its embedded kobject is just a matter of using the kobj member. Code that works with kobjects will often have the opposite problem, however: given a struct kobject pointer, what is the pointer to the containing structure? You must avoid tricks (such as assuming that the kobject is at the beginning of the structure) and, instead, use the container_of() macro, found in : - container_of(pointer, type, member) + container_of(pointer, type, member) -where pointer is the pointer to the embedded kobject, type is the type of -the containing structure, and member is the name of the structure field to -which pointer points. The return value from container_of() is a pointer to -the given type. So, for example, a pointer "kp" to a struct kobject -embedded within a struct uio_mem could be converted to a pointer to the -containing uio_mem structure with: +where: - struct uio_mem *u_mem = container_of(kp, struct uio_mem, kobj); + * "pointer" is the pointer to the embedded kobject, + * "type" is the type of the containing structure, and + * "member" is the name of the structure field to which "pointer" points. -Programmers often define a simple macro for "back-casting" kobject pointers -to the containing type. +The return value from container_of() is a pointer to the corresponding +container type. So, for example, a pointer "kp" to a struct kobject +embedded *within* a struct uio_map could be converted to a pointer to the +*containing* uio_map structure with: + + struct uio_map *u_map = container_of(kp, struct uio_map, kobj); + +For convenience, programmers often define a simple macro for "back-casting" +kobject pointers to the containing type. Exactly this happens in the +earlier drivers/uio/uio.c, as you can see here: + + struct uio_map { + struct kobject kobj; + struct uio_mem *mem; + }; + + #define to_map(map) container_of(map, struct uio_map, kobj) + +where the macro argument "map" is a pointer to the struct kobject in +question. That macro is subsequently invoked with: + + struct uio_map *map = to_map(kobj); Initialization of kobjects @@ -387,4 +406,5 @@ called, and the objects in the former circle release each other. Example code to copy from For a more complete example of using ksets and kobjects properly, see the -sample/kobject/kset-example.c code. +example programs samples/kobject/{kobject-example.c,kset-example.c}, +which will be built as loadable modules if you select CONFIG_SAMPLE_KOBJECT. diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt index 7f5809eddee6..631ad2f1b229 100644 --- a/Documentation/memory-barriers.txt +++ b/Documentation/memory-barriers.txt @@ -3,6 +3,7 @@ ============================ By: David Howells + Paul E. McKenney Contents: @@ -60,6 +61,10 @@ Contents: - And then there's the Alpha. + (*) Example uses. + + - Circular buffers. + (*) References. @@ -2226,6 +2231,21 @@ The Alpha defines the Linux kernel's memory barrier model. See the subsection on "Cache Coherency" above. +============ +EXAMPLE USES +============ + +CIRCULAR BUFFERS +---------------- + +Memory barriers can be used to implement circular buffering without the need +of a lock to serialise the producer with the consumer. See: + + Documentation/circular-buffers.txt + +for details. + + ========== REFERENCES ========== diff --git a/Documentation/networking/Makefile b/Documentation/networking/Makefile index 6d8af1ac56c4..5aba7a33aeeb 100644 --- a/Documentation/networking/Makefile +++ b/Documentation/networking/Makefile @@ -6,3 +6,5 @@ hostprogs-y := ifenslave # Tell kbuild to always build the programs always := $(hostprogs-y) + +obj-m := timestamping/ diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt new file mode 100644 index 000000000000..7ee770b5ef5f --- /dev/null +++ b/Documentation/networking/stmmac.txt @@ -0,0 +1,143 @@ + STMicroelectronics 10/100/1000 Synopsys Ethernet driver + +Copyright (C) 2007-2010 STMicroelectronics Ltd +Author: Giuseppe Cavallaro + +This is the driver for the MAC 10/100/1000 on-chip Ethernet controllers +(Synopsys IP blocks); it has been fully tested on STLinux platforms. + +Currently this network device driver is for all STM embedded MAC/GMAC +(7xxx SoCs). + +DWC Ether MAC 10/100/1000 Universal version 3.41a and DWC Ether MAC 10/100 +Universal version 4.0 have been used for developing the first code +implementation. + +Please, for more information also visit: www.stlinux.com + +1) Kernel Configuration +The kernel configuration option is STMMAC_ETH: + Device Drivers ---> Network device support ---> Ethernet (1000 Mbit) ---> + STMicroelectronics 10/100/1000 Ethernet driver (STMMAC_ETH) + +2) Driver parameters list: + debug: message level (0: no output, 16: all); + phyaddr: to manually provide the physical address to the PHY device; + dma_rxsize: DMA rx ring size; + dma_txsize: DMA tx ring size; + buf_sz: DMA buffer size; + tc: control the HW FIFO threshold; + tx_coe: Enable/Disable Tx Checksum Offload engine; + watchdog: transmit timeout (in milliseconds); + flow_ctrl: Flow control ability [on/off]; + pause: Flow Control Pause Time; + tmrate: timer period (only if timer optimisation is configured). + +3) Command line options +Driver parameters can be also passed in command line by using: + stmmaceth=dma_rxsize:128,dma_txsize:512 + +4) Driver information and notes + +4.1) Transmit process +The xmit method is invoked when the kernel needs to transmit a packet; it sets +the descriptors in the ring and informs the DMA engine that there is a packet +ready to be transmitted. +Once the controller has finished transmitting the packet, an interrupt is +triggered; So the driver will be able to release the socket buffers. +By default, the driver sets the NETIF_F_SG bit in the features field of the +net_device structure enabling the scatter/gather feature. + +4.2) Receive process +When one or more packets are received, an interrupt happens. The interrupts +are not queued so the driver has to scan all the descriptors in the ring during +the receive process. +This is based on NAPI so the interrupt handler signals only if there is work to be +done, and it exits. +Then the poll method will be scheduled at some future point. +The incoming packets are stored, by the DMA, in a list of pre-allocated socket +buffers in order to avoid the memcpy (Zero-copy). + +4.3) Timer-Driver Interrupt +Instead of having the device that asynchronously notifies the frame receptions, the +driver configures a timer to generate an interrupt at regular intervals. +Based on the granularity of the timer, the frames that are received by the device +will experience different levels of latency. Some NICs have dedicated timer +device to perform this task. STMMAC can use either the RTC device or the TMU +channel 2 on STLinux platforms. +The timers frequency can be passed to the driver as parameter; when change it, +take care of both hardware capability and network stability/performance impact. +Several performance tests on STM platforms showed this optimisation allows to spare +the CPU while having the maximum throughput. + +4.4) WOL +Wake up on Lan feature through Magic Frame is only supported for the GMAC +core. + +4.5) DMA descriptors +Driver handles both normal and enhanced descriptors. The latter has been only +tested on DWC Ether MAC 10/100/1000 Universal version 3.41a. + +4.6) Ethtool support +Ethtool is supported. Driver statistics and internal errors can be taken using: +ethtool -S ethX command. It is possible to dump registers etc. + +4.7) Jumbo and Segmentation Offloading +Jumbo frames are supported and tested for the GMAC. +The GSO has been also added but it's performed in software. +LRO is not supported. + +4.8) Physical +The driver is compatible with PAL to work with PHY and GPHY devices. + +4.9) Platform information +Several information came from the platform; please refer to the +driver's Header file in include/linux directory. + +struct plat_stmmacenet_data { + int bus_id; + int pbl; + int has_gmac; + void (*fix_mac_speed)(void *priv, unsigned int speed); + void (*bus_setup)(unsigned long ioaddr); +#ifdef CONFIG_STM_DRIVERS + struct stm_pad_config *pad_config; +#endif + void *bsp_priv; +}; + +Where: +- pbl (Programmable Burst Length) is maximum number of + beats to be transferred in one DMA transaction. + GMAC also enables the 4xPBL by default. +- fix_mac_speed and bus_setup are used to configure internal target + registers (on STM platforms); +- has_gmac: GMAC core is on board (get it at run-time in the next step); +- bus_id: bus identifier. + +struct plat_stmmacphy_data { + int bus_id; + int phy_addr; + unsigned int phy_mask; + int interface; + int (*phy_reset)(void *priv); + void *priv; +}; + +Where: +- bus_id: bus identifier; +- phy_addr: physical address used for the attached phy device; + set it to -1 to get it at run-time; +- interface: physical MII interface mode; +- phy_reset: hook to reset HW function. + +TODO: +- Continue to make the driver more generic and suitable for other Synopsys + Ethernet controllers used on other architectures (i.e. ARM). +- 10G controllers are not supported. +- MAC uses Normal descriptors and GMAC uses enhanced ones. + This is a limit that should be reviewed. MAC could want to + use the enhanced structure. +- Checksumming: Rx/Tx csum is done in HW in case of GMAC only. +- Review the timer optimisation code to use an embedded device that seems to be + available in new chip generations. diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index 0e58b4539176..e8c8f4f06c67 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt @@ -41,11 +41,12 @@ SOF_TIMESTAMPING_SOFTWARE: return system time stamp generated in SOF_TIMESTAMPING_TX/RX determine how time stamps are generated. SOF_TIMESTAMPING_RAW/SYS determine how they are reported in the following control message: - struct scm_timestamping { - struct timespec systime; - struct timespec hwtimetrans; - struct timespec hwtimeraw; - }; + +struct scm_timestamping { + struct timespec systime; + struct timespec hwtimetrans; + struct timespec hwtimeraw; +}; recvmsg() can be used to get this control message for regular incoming packets. For send time stamps the outgoing packet is looped back to @@ -87,12 +88,13 @@ by the network device and will be empty without that support. SIOCSHWTSTAMP: Hardware time stamping must also be initialized for each device driver -that is expected to do hardware time stamping. The parameter is: +that is expected to do hardware time stamping. The parameter is defined in +/include/linux/net_tstamp.h as: struct hwtstamp_config { - int flags; /* no flags defined right now, must be zero */ - int tx_type; /* HWTSTAMP_TX_* */ - int rx_filter; /* HWTSTAMP_FILTER_* */ + int flags; /* no flags defined right now, must be zero */ + int tx_type; /* HWTSTAMP_TX_* */ + int rx_filter; /* HWTSTAMP_FILTER_* */ }; Desired behavior is passed into the kernel and to a specific device by @@ -139,42 +141,56 @@ enum { /* time stamp any incoming packet */ HWTSTAMP_FILTER_ALL, - /* return value: time stamp all packets requested plus some others */ - HWTSTAMP_FILTER_SOME, + /* return value: time stamp all packets requested plus some others */ + HWTSTAMP_FILTER_SOME, /* PTP v1, UDP, any kind of event packet */ HWTSTAMP_FILTER_PTP_V1_L4_EVENT, - ... + /* for the complete list of values, please check + * the include file /include/linux/net_tstamp.h + */ }; DEVICE IMPLEMENTATION A driver which supports hardware time stamping must support the -SIOCSHWTSTAMP ioctl. Time stamps for received packets must be stored -in the skb with skb_hwtstamp_set(). +SIOCSHWTSTAMP ioctl and update the supplied struct hwtstamp_config with +the actual values as described in the section on SIOCSHWTSTAMP. + +Time stamps for received packets must be stored in the skb. To get a pointer +to the shared time stamp structure of the skb call skb_hwtstamps(). Then +set the time stamps in the structure: + +struct skb_shared_hwtstamps { + /* hardware time stamp transformed into duration + * since arbitrary point in time + */ + ktime_t hwtstamp; + ktime_t syststamp; /* hwtstamp transformed to system time base */ +}; Time stamps for outgoing packets are to be generated as follows: -- In hard_start_xmit(), check if skb_hwtstamp_check_tx_hardware() - returns non-zero. If yes, then the driver is expected - to do hardware time stamping. +- In hard_start_xmit(), check if skb_tx(skb)->hardware is set no-zero. + If yes, then the driver is expected to do hardware time stamping. - If this is possible for the skb and requested, then declare - that the driver is doing the time stamping by calling - skb_hwtstamp_tx_in_progress(). A driver not supporting - hardware time stamping doesn't do that. A driver must never - touch sk_buff::tstamp! It is used to store how time stamping - for an outgoing packets is to be done. + that the driver is doing the time stamping by setting the field + skb_tx(skb)->in_progress non-zero. You might want to keep a pointer + to the associated skb for the next step and not free the skb. A driver + not supporting hardware time stamping doesn't do that. A driver must + never touch sk_buff::tstamp! It is used to store software generated + time stamps by the network subsystem. - As soon as the driver has sent the packet and/or obtained a hardware time stamp for it, it passes the time stamp back by calling skb_hwtstamp_tx() with the original skb, the raw - hardware time stamp and a handle to the device (necessary - to convert the hardware time stamp to system time). If obtaining - the hardware time stamp somehow fails, then the driver should - not fall back to software time stamping. The rationale is that - this would occur at a later time in the processing pipeline - than other software time stamping and therefore could lead - to unexpected deltas between time stamps. -- If the driver did not call skb_hwtstamp_tx_in_progress(), then + hardware time stamp. skb_hwtstamp_tx() clones the original skb and + adds the timestamps, therefore the original skb has to be freed now. + If obtaining the hardware time stamp somehow fails, then the driver + should not fall back to software time stamping. The rationale is that + this would occur at a later time in the processing pipeline than other + software time stamping and therefore could lead to unexpected deltas + between time stamps. +- If the driver did not call set skb_tx(skb)->in_progress, then dev_hard_start_xmit() checks whether software time stamping is wanted as fallback and potentially generates the time stamp. diff --git a/Documentation/networking/timestamping/Makefile b/Documentation/networking/timestamping/Makefile index 2a1489fdc036..e79973443e9f 100644 --- a/Documentation/networking/timestamping/Makefile +++ b/Documentation/networking/timestamping/Makefile @@ -1,6 +1,13 @@ -CPPFLAGS = -I../../../include +# kbuild trick to avoid linker error. Can be omitted if a module is built. +obj- := dummy.o -timestamping: timestamping.c +# List of programs to build +hostprogs-y := timestamping + +# Tell kbuild to always build the programs +always := $(hostprogs-y) + +HOSTCFLAGS_timestamping.o += -I$(objtree)/usr/include clean: rm -f timestamping diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c index bab619a48214..8ba82bfe6a33 100644 --- a/Documentation/networking/timestamping/timestamping.c +++ b/Documentation/networking/timestamping/timestamping.c @@ -41,9 +41,9 @@ #include #include -#include "asm/types.h" -#include "linux/net_tstamp.h" -#include "linux/errqueue.h" +#include +#include +#include #ifndef SO_TIMESTAMPING # define SO_TIMESTAMPING 37 @@ -164,7 +164,7 @@ static void printpacket(struct msghdr *msg, int res, gettimeofday(&now, 0); - printf("%ld.%06ld: received %s data, %d bytes from %s, %d bytes control messages\n", + printf("%ld.%06ld: received %s data, %d bytes from %s, %zu bytes control messages\n", (long)now.tv_sec, (long)now.tv_usec, (recvmsg_flags & MSG_ERRQUEUE) ? "error" : "regular", res, @@ -173,7 +173,7 @@ static void printpacket(struct msghdr *msg, int res, for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) { - printf(" cmsg len %d: ", cmsg->cmsg_len); + printf(" cmsg len %zu: ", cmsg->cmsg_len); switch (cmsg->cmsg_level) { case SOL_SOCKET: printf("SOL_SOCKET "); diff --git a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt index 6e37be1eeb2d..4f8930263dd9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt +++ b/Documentation/powerpc/dts-bindings/fsl/cpm_qe/qe.txt @@ -21,6 +21,15 @@ Required properties: - fsl,qe-num-snums: define how many serial number(SNUM) the QE can use for the threads. +Optional properties: +- fsl,firmware-phandle: + Usage: required only if there is no fsl,qe-firmware child node + Value type: + Definition: Points to a firmware node (see "QE Firmware Node" below) + that contains the firmware that should be uploaded for this QE. + The compatible property for the firmware node should say, + "fsl,qe-firmware". + Recommended properties - brg-frequency : the internal clock source frequency for baud-rate generators in Hz. @@ -59,3 +68,48 @@ Example: reg = <0 c000>; }; }; + +* QE Firmware Node + +This node defines a firmware binary that is embedded in the device tree, for +the purpose of passing the firmware from bootloader to the kernel, or from +the hypervisor to the guest. + +The firmware node itself contains the firmware binary contents, a compatible +property, and any firmware-specific properties. The node should be placed +inside a QE node that needs it. Doing so eliminates the need for a +fsl,firmware-phandle property. Other QE nodes that need the same firmware +should define an fsl,firmware-phandle property that points to the firmware node +in the first QE node. + +The fsl,firmware property can be specified in the DTS (possibly using incbin) +or can be inserted by the boot loader at boot time. + +Required properties: + - compatible + Usage: required + Value type: + Definition: A standard property. Specify a string that indicates what + kind of firmware it is. For QE, this should be "fsl,qe-firmware". + + - fsl,firmware + Usage: required + Value type: , encoded as an array of bytes + Definition: A standard property. This property contains the firmware + binary "blob". + +Example: + qe1@e0080000 { + compatible = "fsl,qe"; + qe_firmware:qe-firmware { + compatible = "fsl,qe-firmware"; + fsl,firmware = [0x70 0xcd 0x00 0x00 0x01 0x46 0x45 ...]; + }; + ... + }; + + qe2@e0090000 { + compatible = "fsl,qe"; + fsl,firmware-phandle = <&qe_firmware>; + ... + }; diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt index f4dd3bf99d12..98d14cb8a85d 100644 --- a/Documentation/sound/alsa/HD-Audio.txt +++ b/Documentation/sound/alsa/HD-Audio.txt @@ -119,10 +119,18 @@ the codec slots 0 and 1 no matter what the hardware reports. Interrupt Handling ~~~~~~~~~~~~~~~~~~ -In rare but some cases, the interrupt isn't properly handled as -default. You would notice this by the DMA transfer error reported by -ALSA PCM core, for example. Using MSI might help in such a case. -Pass `enable_msi=1` option for enabling MSI. +HD-audio driver uses MSI as default (if available) since 2.6.33 +kernel as MSI works better on some machines, and in general, it's +better for performance. However, Nvidia controllers showed bad +regressions with MSI (especially in a combination with AMD chipset), +thus we disabled MSI for them. + +There seem also still other devices that don't work with MSI. If you +see a regression wrt the sound quality (stuttering, etc) or a lock-up +in the recent kernel, try to pass `enable_msi=0` option to disable +MSI. If it works, you can add the known bad device to the blacklist +defined in hda_intel.c. In such a case, please report and give the +patch back to the upstream developer. HD-AUDIO CODEC diff --git a/Documentation/spi/spidev_test.c b/Documentation/spi/spidev_test.c index 10abd3773e49..16feda901469 100644 --- a/Documentation/spi/spidev_test.c +++ b/Documentation/spi/spidev_test.c @@ -58,7 +58,7 @@ static void transfer(int fd) }; ret = ioctl(fd, SPI_IOC_MESSAGE(1), &tr); - if (ret == 1) + if (ret < 1) pabort("can't send spi message"); for (ret = 0; ret < ARRAY_SIZE(tx); ret++) { diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index 5effa5bd993b..e213f45cf9d7 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -18,16 +18,15 @@ Rules on what kind of patches are accepted, and which ones are not, into the - It cannot contain any "trivial" fixes in it (spelling changes, whitespace cleanups, etc). - It must follow the Documentation/SubmittingPatches rules. - - It or an equivalent fix must already exist in Linus' tree. Quote the - respective commit ID in Linus' tree in your patch submission to -stable. + - It or an equivalent fix must already exist in Linus' tree (upstream). Procedure for submitting patches to the -stable tree: - Send the patch, after verifying that it follows the above rules, to - stable@kernel.org. - - To have the patch automatically included in the stable tree, add the - the tag + stable@kernel.org. You must note the upstream commit ID in the changelog + of your submission. + - To have the patch automatically included in the stable tree, add the tag Cc: stable@kernel.org in the sign-off area. Once the patch is merged it will be applied to the stable tree without anything else needing to be done by the author diff --git a/Documentation/volatile-considered-harmful.txt b/Documentation/volatile-considered-harmful.txt index 991c26a6ef64..db0cb228d64a 100644 --- a/Documentation/volatile-considered-harmful.txt +++ b/Documentation/volatile-considered-harmful.txt @@ -63,9 +63,9 @@ way to perform a busy wait is: cpu_relax(); The cpu_relax() call can lower CPU power consumption or yield to a -hyperthreaded twin processor; it also happens to serve as a memory barrier, -so, once again, volatile is unnecessary. Of course, busy-waiting is -generally an anti-social act to begin with. +hyperthreaded twin processor; it also happens to serve as a compiler +barrier, so, once again, volatile is unnecessary. Of course, busy- +waiting is generally an anti-social act to begin with. There are still a few rare situations where volatile makes sense in the kernel: diff --git a/Documentation/watchdog/src/watchdog-simple.c b/Documentation/watchdog/src/watchdog-simple.c index 4cf72f3fa8e9..ba45803a2216 100644 --- a/Documentation/watchdog/src/watchdog-simple.c +++ b/Documentation/watchdog/src/watchdog-simple.c @@ -17,9 +17,6 @@ int main(void) ret = -1; break; } - ret = fsync(fd); - if (ret) - break; sleep(10); } close(fd); diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index a750532ffcf8..63fdc34ceb98 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -31,6 +31,8 @@ static void keep_alive(void) */ int main(int argc, char *argv[]) { + int flags; + fd = open("/dev/watchdog", O_WRONLY); if (fd == -1) { @@ -41,12 +43,14 @@ int main(int argc, char *argv[]) if (argc > 1) { if (!strncasecmp(argv[1], "-d", 2)) { - ioctl(fd, WDIOC_SETOPTIONS, WDIOS_DISABLECARD); + flags = WDIOS_DISABLECARD; + ioctl(fd, WDIOC_SETOPTIONS, &flags); fprintf(stderr, "Watchdog card disabled.\n"); fflush(stderr); exit(0); } else if (!strncasecmp(argv[1], "-e", 2)) { - ioctl(fd, WDIOC_SETOPTIONS, WDIOS_ENABLECARD); + flags = WDIOS_ENABLECARD; + ioctl(fd, WDIOC_SETOPTIONS, &flags); fprintf(stderr, "Watchdog card enabled.\n"); fflush(stderr); exit(0); diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt index 4cc4ba9d7150..eb7132ed8bbc 100644 --- a/Documentation/watchdog/watchdog-api.txt +++ b/Documentation/watchdog/watchdog-api.txt @@ -222,11 +222,10 @@ returned value is the temperature in degrees fahrenheit. ioctl(fd, WDIOC_GETTEMP, &temperature); Finally the SETOPTIONS ioctl can be used to control some aspects of -the cards operation; right now the pcwd driver is the only one -supporting this ioctl. +the cards operation. int options = 0; - ioctl(fd, WDIOC_SETOPTIONS, options); + ioctl(fd, WDIOC_SETOPTIONS, &options); The following options are available: diff --git a/MAINTAINERS b/MAINTAINERS index 47cc449d89d8..d5b0b1b6dc52 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -485,8 +485,8 @@ S: Maintained F: drivers/input/mouse/bcm5974.c APPLE SMC DRIVER -M: Nicolas Boichat -L: mactel-linux-devel@lists.sourceforge.net +M: Henrik Rydberg +L: lm-sensors@lm-sensors.org S: Maintained F: drivers/hwmon/applesmc.c @@ -797,12 +797,12 @@ M: Michael Petchkovsky S: Maintained ARM/NOMADIK ARCHITECTURE -M: Alessandro Rubini -M: STEricsson -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-nomadik/ -F: arch/arm/plat-nomadik/ +M: Alessandro Rubini +M: STEricsson +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-nomadik/ +F: arch/arm/plat-nomadik/ ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT M: Nelson Castillo @@ -971,6 +971,16 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.mcuos.com S: Maintained +ARM/U300 MACHINE SUPPORT +M: Linus Walleij +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Supported +F: arch/arm/mach-u300/ +F: drivers/i2c/busses/i2c-stu300.c +F: drivers/rtc/rtc-coh901331.c +F: drivers/watchdog/coh901327_wdt.c +F: drivers/dma/coh901318* + ARM/U8500 ARM ARCHITECTURE M: Srinidhi Kasagar L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1441,6 +1451,15 @@ F: arch/powerpc/include/asm/spu*.h F: arch/powerpc/oprofile/*cell* F: arch/powerpc/platforms/cell/ +CEPH DISTRIBUTED FILE SYSTEM CLIENT +M: Sage Weil +L: ceph-devel@vger.kernel.org +W: http://ceph.newdream.net/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git +S: Supported +F: Documentation/filesystems/ceph.txt +F: fs/ceph + CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: M: David Vrabel L: linux-usb@vger.kernel.org @@ -1917,17 +1936,17 @@ F: drivers/scsi/dpt* F: drivers/scsi/dpt/ DRBD DRIVER -P: Philipp Reisner -P: Lars Ellenberg -M: drbd-dev@lists.linbit.com -L: drbd-user@lists.linbit.com -W: http://www.drbd.org -T: git git://git.drbd.org/linux-2.6-drbd.git drbd -T: git git://git.drbd.org/drbd-8.3.git -S: Supported -F: drivers/block/drbd/ -F: lib/lru_cache.c -F: Documentation/blockdev/drbd/ +P: Philipp Reisner +P: Lars Ellenberg +M: drbd-dev@lists.linbit.com +L: drbd-user@lists.linbit.com +W: http://www.drbd.org +T: git git://git.drbd.org/linux-2.6-drbd.git drbd +T: git git://git.drbd.org/drbd-8.3.git +S: Supported +F: drivers/block/drbd/ +F: lib/lru_cache.c +F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, AND SYSFS M: Greg Kroah-Hartman @@ -1941,7 +1960,7 @@ F: lib/kobj* DRM DRIVERS M: David Airlie -L: dri-devel@lists.sourceforge.net +L: dri-devel@lists.freedesktop.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git S: Maintained F: drivers/gpu/drm/ @@ -2465,12 +2484,6 @@ L: linuxppc-dev@ozlabs.org S: Odd Fixes F: drivers/char/hvc_* -VIRTIO CONSOLE DRIVER -M: Amit Shah -L: virtualization@lists.linux-foundation.org -S: Maintained -F: drivers/char/virtio_console.c - iSCSI BOOT FIRMWARE TABLE (iBFT) DRIVER M: Peter Jones M: Konrad Rzeszutek Wilk @@ -3074,6 +3087,7 @@ F: include/scsi/*iscsi* ISDN SUBSYSTEM M: Karsten Keil L: isdn4linux@listserv.isdn4linux.de (subscribers-only) +L: netdev@vger.kernel.org W: http://www.isdn4linux.de T: git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git S: Maintained @@ -3260,6 +3274,16 @@ S: Maintained F: include/linux/kexec.h F: kernel/kexec.c +KEYS/KEYRINGS: +M: David Howells +L: keyrings@linux-nfs.org +S: Maintained +F: Documentation/keys.txt +F: include/linux/key.h +F: include/linux/key-type.h +F: include/keys/ +F: security/keys/ + KGDB M: Jason Wessel L: kgdb-bugreport@lists.sourceforge.net @@ -3509,8 +3533,8 @@ F: drivers/scsi/sym53c8xx_2/ LTP (Linux Test Project) M: Rishikesh K Rajak M: Garrett Cooper -M: Mike Frysinger -M: Subrata Modak +M: Mike Frysinger +M: Subrata Modak L: ltp-list@lists.sourceforge.net (subscribers-only) W: http://ltp.sourceforge.net/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git @@ -4458,17 +4482,17 @@ S: Maintained F: drivers/ata/sata_promise.* PS3 NETWORK SUPPORT -M: Geoff Levand +M: Geoff Levand L: netdev@vger.kernel.org L: cbe-oss-dev@ozlabs.org -S: Supported +S: Maintained F: drivers/net/ps3_gelic_net.* PS3 PLATFORM SUPPORT -M: Geoff Levand +M: Geoff Levand L: linuxppc-dev@ozlabs.org L: cbe-oss-dev@ozlabs.org -S: Supported +S: Maintained F: arch/powerpc/boot/ps3* F: arch/powerpc/include/asm/lv1call.h F: arch/powerpc/include/asm/ps3*.h @@ -4767,12 +4791,11 @@ F: drivers/s390/crypto/ S390 ZFCP DRIVER M: Christof Schmitt -M: Martin Peschke +M: Swen Schillig M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ S: Supported -F: Documentation/s390/zfcpdump.txt F: drivers/s390/scsi/zfcp_* S390 IUCV NETWORK LAYER @@ -5214,6 +5237,21 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git S: Maintained F: arch/sparc/ +SPARC SERIAL DRIVERS +M: "David S. Miller" +L: sparclinux@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git +S: Maintained +F: drivers/serial/suncore.c +F: drivers/serial/suncore.h +F: drivers/serial/sunhv.c +F: drivers/serial/sunsab.c +F: drivers/serial/sunsab.h +F: drivers/serial/sunsu.c +F: drivers/serial/sunzilog.c +F: drivers/serial/sunzilog.h + SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER M: Roger Wolff S: Supported @@ -5399,7 +5437,6 @@ S: Maintained F: sound/soc/codecs/twl4030* TIPC NETWORK LAYER -M: Per Liden M: Jon Maloy M: Allan Stephens L: tipc-discussion@lists.sourceforge.net @@ -5937,6 +5974,13 @@ S: Maintained F: Documentation/filesystems/vfat.txt F: fs/fat/ +VIRTIO CONSOLE DRIVER +M: Amit Shah +L: virtualization@lists.linux-foundation.org +S: Maintained +F: drivers/char/virtio_console.c +F: include/linux/virtio_console.h + VIRTIO HOST (VHOST) M: "Michael S. Tsirkin" L: kvm@vger.kernel.org @@ -6177,7 +6221,7 @@ F: arch/x86/ X86 PLATFORM DRIVERS M: Matthew Garrett L: platform-driver-x86@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git S: Maintained F: drivers/platform/x86 diff --git a/Makefile b/Makefile index 08ff02da7ce3..701bc65b3952 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 34 -EXTRAVERSION = -rc1 -NAME = Man-Eating Seals of Antiquity +EXTRAVERSION = -rc7 +NAME = Sheep on Meth # *DOCUMENTATION* # To see a list of typical targets execute "make help" diff --git a/arch/alpha/boot/bootp.c b/arch/alpha/boot/bootp.c index 3c8d1b25c661..be61670d4096 100644 --- a/arch/alpha/boot/bootp.c +++ b/arch/alpha/boot/bootp.c @@ -8,6 +8,7 @@ * based significantly on the arch/alpha/boot/main.c of Linus Torvalds */ #include +#include #include #include #include diff --git a/arch/alpha/boot/bootpz.c b/arch/alpha/boot/bootpz.c index ade3f129dc27..c98865f21423 100644 --- a/arch/alpha/boot/bootpz.c +++ b/arch/alpha/boot/bootpz.c @@ -10,6 +10,7 @@ * and the decompression code from MILO. */ #include +#include #include #include #include diff --git a/arch/alpha/boot/main.c b/arch/alpha/boot/main.c index 644b7db55438..ded57d9a80e1 100644 --- a/arch/alpha/boot/main.c +++ b/arch/alpha/boot/main.c @@ -6,6 +6,7 @@ * This file is the bootloader for the Linux/AXP kernel */ #include +#include #include #include #include diff --git a/arch/alpha/boot/misc.c b/arch/alpha/boot/misc.c index 3047a1b3a517..3ff9a957a25c 100644 --- a/arch/alpha/boot/misc.c +++ b/arch/alpha/boot/misc.c @@ -19,6 +19,7 @@ */ #include +#include #include diff --git a/arch/alpha/include/asm/core_marvel.h b/arch/alpha/include/asm/core_marvel.h index 30d55fe7aaf6..dad300fa14ce 100644 --- a/arch/alpha/include/asm/core_marvel.h +++ b/arch/alpha/include/asm/core_marvel.h @@ -12,7 +12,6 @@ #define __ALPHA_MARVEL__H__ #include -#include #include #include diff --git a/arch/alpha/include/asm/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h index acf55b483472..21ac53383b37 100644 --- a/arch/alpha/include/asm/core_mcpcia.h +++ b/arch/alpha/include/asm/core_mcpcia.h @@ -6,7 +6,6 @@ #define MCPCIA_ONE_HAE_WINDOW 1 #include -#include #include /* diff --git a/arch/alpha/include/asm/core_titan.h b/arch/alpha/include/asm/core_titan.h index a17f6f33b68e..8cf79d1219e1 100644 --- a/arch/alpha/include/asm/core_titan.h +++ b/arch/alpha/include/asm/core_titan.h @@ -2,7 +2,6 @@ #define __ALPHA_TITAN__H__ #include -#include #include /* diff --git a/arch/alpha/include/asm/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h index 58d4fe48742c..8e39ecf09419 100644 --- a/arch/alpha/include/asm/core_tsunami.h +++ b/arch/alpha/include/asm/core_tsunami.h @@ -2,7 +2,6 @@ #define __ALPHA_TSUNAMI__H__ #include -#include #include /* diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index 5f2cf23c4648..7f912ba3d9ad 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 53c213f70fcb..de9d39717808 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include @@ -37,6 +36,7 @@ #include #include #include +#include #include #include diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c index 823a540f9f5b..246100ef07c2 100644 --- a/arch/alpha/kernel/pci-noop.c +++ b/arch/alpha/kernel/pci-noop.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c index 6ea822e7f724..d979e7c7bc4b 100644 --- a/arch/alpha/kernel/pci-sysfs.c +++ b/arch/alpha/kernel/pci-sysfs.c @@ -10,6 +10,7 @@ */ #include +#include #include static int hose_mmap_page_range(struct pci_controller *hose, diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c index ce9e54c887fa..d1dbd9acd1df 100644 --- a/arch/alpha/kernel/pci_iommu.c +++ b/arch/alpha/kernel/pci_iommu.c @@ -5,7 +5,7 @@ #include #include #include -#include +#include #include #include #include diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 289039bb6bb2..395a464353b8 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -28,6 +27,7 @@ #include #include #include +#include #include #include diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c index 9acadc6b16a0..baa903602f6a 100644 --- a/arch/alpha/kernel/ptrace.c +++ b/arch/alpha/kernel/ptrace.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include diff --git a/arch/alpha/kernel/smc37c669.c b/arch/alpha/kernel/smc37c669.c index bca5bda90cde..0435921d41c6 100644 --- a/arch/alpha/kernel/smc37c669.c +++ b/arch/alpha/kernel/smc37c669.c @@ -3,7 +3,6 @@ */ #include -#include #include #include #include diff --git a/arch/alpha/kernel/smc37c93x.c b/arch/alpha/kernel/smc37c93x.c index 2636cc028d06..3e6a2893af9f 100644 --- a/arch/alpha/kernel/smc37c93x.c +++ b/arch/alpha/kernel/smc37c93x.c @@ -4,7 +4,6 @@ #include -#include #include #include #include diff --git a/arch/alpha/kernel/srm_env.c b/arch/alpha/kernel/srm_env.c index dbbf04f9230e..4afc1a1e2e5a 100644 --- a/arch/alpha/kernel/srm_env.c +++ b/arch/alpha/kernel/srm_env.c @@ -30,6 +30,7 @@ */ #include +#include #include #include #include diff --git a/arch/alpha/kernel/sys_dp264.c b/arch/alpha/kernel/sys_dp264.c index d64e1e497e76..4026502ab707 100644 --- a/arch/alpha/kernel/sys_dp264.c +++ b/arch/alpha/kernel/sys_dp264.c @@ -224,7 +224,7 @@ static void dp264_device_interrupt(unsigned long vector) { #if 1 - printk("dp264_device_interrupt: NOT IMPLEMENTED YET!! \n"); + printk("dp264_device_interrupt: NOT IMPLEMENTED YET!!\n"); #else unsigned long pld; unsigned int i; diff --git a/arch/alpha/kernel/sys_titan.c b/arch/alpha/kernel/sys_titan.c index 288053342c83..9008d0f20c53 100644 --- a/arch/alpha/kernel/sys_titan.c +++ b/arch/alpha/kernel/sys_titan.c @@ -171,7 +171,7 @@ titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) static void titan_device_interrupt(unsigned long vector) { - printk("titan_device_interrupt: NOT IMPLEMENTED YET!! \n"); + printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n"); } static void diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index 6ee7655b7568..b14f015008ad 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include @@ -771,8 +772,7 @@ asmlinkage void do_entUnaUser(void __user * va, unsigned long opcode, unsigned long reg, struct pt_regs *regs) { - static int cnt = 0; - static unsigned long last_time; + static DEFINE_RATELIMIT_STATE(ratelimit, 5 * HZ, 5); unsigned long tmp1, tmp2, tmp3, tmp4; unsigned long fake_reg, *reg_addr = &fake_reg; @@ -783,15 +783,11 @@ do_entUnaUser(void __user * va, unsigned long opcode, with the unaliged access. */ if (!test_thread_flag (TIF_UAC_NOPRINT)) { - if (cnt >= 5 && time_after(jiffies, last_time + 5 * HZ)) { - cnt = 0; - } - if (++cnt < 5) { + if (__ratelimit(&ratelimit)) { printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n", current->comm, task_pid_nr(current), regs->pc - 4, va, opcode, reg); } - last_time = jiffies; } if (test_thread_flag (TIF_UAC_SIGBUS)) goto give_sigbus; diff --git a/arch/alpha/mm/init.c b/arch/alpha/mm/init.c index a0902c20d677..86425ab53bf5 100644 --- a/arch/alpha/mm/init.c +++ b/arch/alpha/mm/init.c @@ -20,6 +20,7 @@ #include #include /* max_low_pfn */ #include +#include #include #include diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index cadfe2ee66a5..92622eb5cc0d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -218,6 +218,10 @@ config MMU Select if you want MMU-based virtualised addressing space support by paged memory management. If unsure, say 'Y'. +# +# The "ARM system type" choice list is ordered alphabetically by option +# text. Please add new entries in the option alphabetic order. +# choice prompt "ARM system type" default ARCH_VERSATILE @@ -249,6 +253,7 @@ config ARCH_REALVIEW select GENERIC_TIME select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select GPIO_PL061 if GPIOLIB help This enables support for ARM Ltd RealView boards. @@ -274,6 +279,18 @@ config ARCH_AT91 This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. +config ARCH_BCMRING + bool "Broadcom BCMRING" + depends on MMU + select CPU_V6 + select ARM_AMBA + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select ARCH_WANT_OPTIONAL_GPIOLIB + help + Support for Broadcom's BCMRing platform. + config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x-based" select CPU_ARM720T @@ -359,20 +376,6 @@ config ARCH_H720X help This enables support for systems based on the Hynix HMS720x -config ARCH_NOMADIK - bool "STMicroelectronics Nomadik" - select ARM_AMBA - select ARM_VIC - select CPU_ARM926T - select HAVE_CLK - select COMMON_CLKDEV - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB - help - Support for the Nomadik platform by ST-Ericsson - config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU @@ -747,6 +750,30 @@ config ARCH_U300 help Support for ST-Ericsson U300 series mobile platforms. +config ARCH_U8500 + bool "ST-Ericsson U8500 Series" + select CPU_V7 + select ARM_AMBA + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select COMMON_CLKDEV + help + Support for ST-Ericsson's Ux500 architecture + +config ARCH_NOMADIK + bool "STMicroelectronics Nomadik" + select ARM_AMBA + select ARM_VIC + select CPU_ARM926T + select HAVE_CLK + select COMMON_CLKDEV + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select ARCH_REQUIRE_GPIOLIB + help + Support for the Nomadik platform by ST-Ericsson + config ARCH_DAVINCI bool "TI DaVinci" select CPU_ARM926T @@ -775,30 +802,13 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_BCMRING - bool "Broadcom BCMRING" - depends on MMU - select CPU_V6 - select ARM_AMBA - select COMMON_CLKDEV - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - help - Support for Broadcom's BCMRing platform. - -config ARCH_U8500 - bool "ST-Ericsson U8500 Series" - select CPU_V7 - select ARM_AMBA - select GENERIC_TIME - select GENERIC_CLOCKEVENTS - select COMMON_CLKDEV - help - Support for ST-Ericsson's Ux500 architecture - endchoice +# +# This is sorted alphabetically by mach-* pathname. However, plat-* +# Kconfigs may be included either alphabetically (according to the +# plat- suffix) or along side the corresponding mach-* source. +# source "arch/arm/mach-aaec2000/Kconfig" source "arch/arm/mach-at91/Kconfig" diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index 0da382f33157..9c097073ce4c 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -11,6 +11,7 @@ extern unsigned long free_mem_end_ptr; extern void error(char *); #define STATIC static +#define STATIC_RW_DATA /* non-static please */ #define ARCH_HAS_DECOMP_WDOG diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 535a91daaa53..c5191b1532e8 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -172,7 +172,7 @@ not_angel: adr r0, LC0 ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp}) THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} ) - THUMB( ldr sp, [r0, #28] ) + THUMB( ldr sp, [r0, #32] ) subs r0, r0, r1 @ calculate the delta offset @ if delta is zero, we are @@ -685,8 +685,8 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 + .word 0x56056900 + .word 0xffffff00 @ PXA9xx W(b) __armv4_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv4_mmu_cache_flush @@ -697,12 +697,6 @@ proc_types: W(b) __armv4_mmu_cache_off W(b) __armv5tej_mmu_cache_flush - .word 0x56056930 - .word 0xff0ffff0 @ PXA935 - W(b) __armv4_mmu_cache_on - W(b) __armv4_mmu_cache_off - W(b) __armv4_mmu_cache_flush - .word 0x56050000 @ Feroceon .word 0xff0f0000 W(b) __armv4_mmu_cache_on @@ -742,7 +736,7 @@ proc_types: .word 0x000f0000 W(b) __armv4_mmu_cache_on W(b) __armv4_mmu_cache_off - W(b) __armv4_mmu_cache_flush + W(b) __armv5tej_mmu_cache_flush .word 0x0007b000 @ ARMv6 .word 0x000ff000 diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index d32bc71c1f78..d2b2ef41cd4f 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -33,6 +33,7 @@ unsigned int __machine_arch_type; #else static void putstr(const char *ptr); +extern void error(char *x); #include diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 6416d5b5020d..dba4c1da63ed 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index ee1d3b85eb65..7974baacafce 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 90ae00b631c2..9dff07c80ddb 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ - locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ @@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ - locomo_writel(0, lchip->base + LOCOMO_SPIIE); + locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); r = locomo_readl(lchip->base + LOCOMO_ASD); @@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); - return; + goto out; } /* Send Sub address (LSB is channel select) */ @@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); - return; + goto out; } /* Send DAC data */ @@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); - return; } +out: /* stop */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig index 1e12167c89b7..6ac6693299bc 100644 --- a/arch/arm/configs/bcmring_defconfig +++ b/arch/arm/configs/bcmring_defconfig @@ -1,13 +1,13 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.31-rc3 -# Fri Jul 17 12:07:28 2009 +# Linux kernel version: 2.6.34-rc2 +# Mon Mar 29 12:01:41 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -18,6 +18,7 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -32,6 +33,12 @@ CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_HAVE_KERNEL_GZIP=y +CONFIG_HAVE_KERNEL_LZO=y +CONFIG_KERNEL_GZIP=y +# CONFIG_KERNEL_BZIP2 is not set +# CONFIG_KERNEL_LZMA is not set +# CONFIG_KERNEL_LZO is not set # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y @@ -43,21 +50,22 @@ CONFIG_SYSVIPC_SYSCTL=y # # RCU Subsystem # -CONFIG_CLASSIC_RCU=y -# CONFIG_TREE_RCU is not set -# CONFIG_PREEMPT_RCU is not set +CONFIG_TREE_RCU=y +# CONFIG_TREE_PREEMPT_RCU is not set +# CONFIG_TINY_RCU is not set +# CONFIG_RCU_TRACE is not set +CONFIG_RCU_FANOUT=32 +# CONFIG_RCU_FANOUT_EXACT is not set # CONFIG_TREE_RCU_TRACE is not set -# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_GROUP_SCHED is not set -# CONFIG_CGROUPS is not set # CONFIG_SYSFS_DEPRECATED_V2 is not set # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y @@ -75,19 +83,21 @@ CONFIG_FUTEX=y # CONFIG_EVENTFD is not set CONFIG_SHMEM=y # CONFIG_AIO is not set +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # -# Performance Counters +# Kernel Performance Events And Counters # +CONFIG_PERF_EVENTS=y +CONFIG_PERF_COUNTERS=y # CONFIG_VM_EVENT_COUNTERS is not set # CONFIG_SLUB_DEBUG is not set -# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y @@ -115,24 +125,53 @@ CONFIG_LBDAF=y # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_INLINE_SPIN_TRYLOCK is not set +# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK is not set +# CONFIG_INLINE_SPIN_LOCK_BH is not set +# CONFIG_INLINE_SPIN_LOCK_IRQ is not set +# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set +# CONFIG_INLINE_SPIN_UNLOCK is not set +# CONFIG_INLINE_SPIN_UNLOCK_BH is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set +# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_READ_TRYLOCK is not set +# CONFIG_INLINE_READ_LOCK is not set +# CONFIG_INLINE_READ_LOCK_BH is not set +# CONFIG_INLINE_READ_LOCK_IRQ is not set +# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set +# CONFIG_INLINE_READ_UNLOCK is not set +# CONFIG_INLINE_READ_UNLOCK_BH is not set +# CONFIG_INLINE_READ_UNLOCK_IRQ is not set +# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set +# CONFIG_INLINE_WRITE_TRYLOCK is not set +# CONFIG_INLINE_WRITE_LOCK is not set +# CONFIG_INLINE_WRITE_LOCK_BH is not set +# CONFIG_INLINE_WRITE_LOCK_IRQ is not set +# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set +# CONFIG_INLINE_WRITE_UNLOCK is not set +# CONFIG_INLINE_WRITE_UNLOCK_BH is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set +# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set +# CONFIG_MUTEX_SPIN_ON_OWNER is not set # CONFIG_FREEZER is not set # # System Type # +CONFIG_MMU=y # CONFIG_ARCH_AAEC2000 is not set # CONFIG_ARCH_INTEGRATOR is not set # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +CONFIG_ARCH_BCMRING=y # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -149,6 +188,7 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ARCH_IXP2000 is not set # CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_DOVE is not set # CONFIG_ARCH_KIRKWOOD is not set # CONFIG_ARCH_LOKI is not set # CONFIG_ARCH_MV78XX0 is not set @@ -157,19 +197,26 @@ CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set +# CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_ARCH_BCMRING=y # CONFIG_ARCH_FPGA11107 is not set CONFIG_ARCH_BCM11107=y @@ -185,7 +232,7 @@ CONFIG_CPU_V6=y CONFIG_CPU_32v6K=y CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_PABRT_V6=y CONFIG_CPU_CACHE_V6=y CONFIG_CPU_CACHE_VIPT=y CONFIG_CPU_COPY_V6=y @@ -201,6 +248,8 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_ICACHE_DISABLE is not set # CONFIG_CPU_DCACHE_DISABLE is not set # CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_ARM_L1_CACHE_SHIFT=5 +CONFIG_CPU_HAS_PMU=y # CONFIG_ARM_ERRATA_411920 is not set CONFIG_COMMON_CLKDEV=y @@ -222,6 +271,8 @@ CONFIG_VMSPLIT_3G=y # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_1G is not set CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT_NONE is not set +# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y @@ -229,6 +280,7 @@ CONFIG_AEABI=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set # CONFIG_HIGHMEM is not set +CONFIG_HW_PERF_EVENTS=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -240,8 +292,7 @@ CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y -CONFIG_HAVE_MLOCK=y -CONFIG_HAVE_MLOCKED_PAGE_BIT=y +# CONFIG_KSM is not set CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_ALIGNMENT_TRAP=y CONFIG_UACCESS_WITH_MEMCPY=y @@ -335,9 +386,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_TESTS is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -433,6 +484,10 @@ CONFIG_MTD_NAND_BCM_UMI_HWCS=y CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set + +# +# DRBD disabled because PROC_FS, INET or CONNECTOR not selected +# # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set @@ -444,6 +499,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -452,6 +508,7 @@ CONFIG_HAVE_IDE=y # CONFIG_MD is not set # CONFIG_NETDEVICES is not set # CONFIG_ISDN is not set +# CONFIG_PHONE is not set # # Input device support @@ -459,6 +516,7 @@ CONFIG_HAVE_IDE=y CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set # CONFIG_INPUT_POLLDEV is not set +# CONFIG_INPUT_SPARSEKMAP is not set # # Userland interfaces @@ -508,6 +566,7 @@ CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -519,13 +578,17 @@ CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set + +# +# PPS support +# +# CONFIG_PPS is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_GPIOLIB is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set CONFIG_SSB_POSSIBLE=y @@ -541,6 +604,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -566,14 +630,17 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # @@ -589,9 +656,12 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set # CONFIG_FILE_LOCKING is not set # CONFIG_FSNOTIFY is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set +# CONFIG_INOTIFY_USER is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set @@ -647,6 +717,7 @@ CONFIG_JFFS2_ZLIB=y # CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set +# CONFIG_LOGFS is not set # CONFIG_CRAMFS is not set # CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set @@ -657,7 +728,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set # @@ -675,11 +745,12 @@ CONFIG_MSDOS_PARTITION=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y +# CONFIG_STRIP_ASM_SYMS is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -693,6 +764,7 @@ CONFIG_TRACING_SUPPORT=y CONFIG_HAVE_ARCH_KGDB=y # CONFIG_ARM_UNWIND is not set # CONFIG_DEBUG_USER is not set +# CONFIG_OC_ETM is not set # # Security options @@ -700,7 +772,11 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set # CONFIG_SECURITYFS is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_DEFAULT_SECURITY_SELINUX is not set +# CONFIG_DEFAULT_SECURITY_SMACK is not set +# CONFIG_DEFAULT_SECURITY_TOMOYO is not set +CONFIG_DEFAULT_SECURITY_DAC=y +CONFIG_DEFAULT_SECURITY="" # CONFIG_CRYPTO is not set # CONFIG_BINARY_PRINTF is not set diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig index 893cd267e075..032b49bad91f 100644 --- a/arch/arm/configs/cm_t35_defconfig +++ b/arch/arm/configs/cm_t35_defconfig @@ -358,7 +358,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/imote2_defconfig b/arch/arm/configs/imote2_defconfig index 95d2becfc664..21f2bff8a363 100644 --- a/arch/arm/configs/imote2_defconfig +++ b/arch/arm/configs/imote2_defconfig @@ -1,13 +1,14 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.33-rc8 -# Sat Feb 13 21:48:53 2010 +# Linux kernel version: 2.6.34-rc2 +# Thu Apr 8 14:49:08 2010 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_HAVE_PROC_CPU=y CONFIG_GENERIC_HARDIRQS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -19,6 +20,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_ARCH_HAS_CPUFREQ=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_NEED_DMA_MAP_STATE=y CONFIG_ARCH_MTD_XIP=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 @@ -60,11 +62,6 @@ CONFIG_RCU_FANOUT=32 # CONFIG_TREE_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y @@ -97,10 +94,14 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_PERF_USE_VMALLOC=y # # Kernel Performance Events And Counters # +# CONFIG_PERF_EVENTS is not set +# CONFIG_PERF_COUNTERS is not set CONFIG_VM_EVENT_COUNTERS=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -184,6 +185,7 @@ CONFIG_MMU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_BCMRING is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_EBSA110 is not set @@ -193,7 +195,6 @@ CONFIG_MMU=y # CONFIG_ARCH_STMP3XXX is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_IOP13XX is not set # CONFIG_ARCH_IOP32X is not set # CONFIG_ARCH_IOP33X is not set @@ -210,21 +211,26 @@ CONFIG_MMU=y # CONFIG_ARCH_KS8695 is not set # CONFIG_ARCH_NS9XXX is not set # CONFIG_ARCH_W90X900 is not set +# CONFIG_ARCH_NUC93X is not set # CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_SHMOBILE is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_S3C64XX is not set +# CONFIG_ARCH_S5P6440 is not set +# CONFIG_ARCH_S5P6442 is not set # CONFIG_ARCH_S5PC1XX is not set +# CONFIG_ARCH_S5PV210 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_U300 is not set +# CONFIG_ARCH_U8500 is not set +# CONFIG_ARCH_NOMADIK is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_BCMRING is not set -# CONFIG_ARCH_U8500 is not set # # Intel PXA2xx/PXA3xx Implementations @@ -253,6 +259,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_EM_X270 is not set # CONFIG_MACH_EXEDA is not set # CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_CAPC7117 is not set # CONFIG_ARCH_GUMSTIX is not set CONFIG_MACH_INTELMOTE2=y # CONFIG_MACH_STARGATE2 is not set @@ -275,7 +282,11 @@ CONFIG_MACH_INTELMOTE2=y # CONFIG_PXA_EZX is not set # CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_PALM is not set +# CONFIG_MACH_RAUMFELD_RC is not set +# CONFIG_MACH_RAUMFELD_CONNECTOR is not set +# CONFIG_MACH_RAUMFELD_SPEAKER is not set # CONFIG_PXA_SHARPSL is not set +# CONFIG_MACH_ICONTROL is not set # CONFIG_ARCH_PXA_ESERIES is not set CONFIG_PXA27x=y CONFIG_PXA_SSP=y @@ -302,6 +313,7 @@ CONFIG_ARM_THUMB=y CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y +CONFIG_CPU_HAS_PMU=y CONFIG_COMMON_CLKDEV=y # @@ -352,7 +364,7 @@ CONFIG_ALIGNMENT_TRAP=y # CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug" +CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=jffs2 console=ttyS2,115200 mem=32M" # CONFIG_XIP_KERNEL is not set CONFIG_KEXEC=y CONFIG_ATAGS_PROC=y @@ -360,24 +372,8 @@ CONFIG_ATAGS_PROC=y # # CPU Power Management # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -CONFIG_CPU_FREQ_DEBUG=y -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=m -CONFIG_CPU_FREQ_GOV_USERSPACE=m -CONFIG_CPU_FREQ_GOV_ONDEMAND=m -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -409,6 +405,7 @@ CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -416,7 +413,6 @@ CONFIG_NET=y # Networking options # CONFIG_PACKET=y -CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set @@ -506,6 +502,7 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_CT is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m CONFIG_NETFILTER_XT_TARGET_LED=m @@ -622,6 +619,7 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_BRIDGE_IGMP_SNOOPING is not set # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set @@ -646,32 +644,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set -CONFIG_BT=y -CONFIG_BT_L2CAP=y -CONFIG_BT_SCO=y -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=y -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=y - -# -# Bluetooth device drivers -# -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=y -CONFIG_BT_HCIUART_H4=y -# CONFIG_BT_HCIUART_BCSP is not set -# CONFIG_BT_HCIUART_LL is not set -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -# CONFIG_BT_ATH3K is not set +# CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # CONFIG_WIRELESS is not set @@ -687,7 +660,8 @@ CONFIG_FIB_RULES=y # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_DEVTMPFS is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -703,9 +677,9 @@ CONFIG_MTD=y # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_AR7_PARTS=y # # User Modules And Translation Layers @@ -812,6 +786,7 @@ CONFIG_HAVE_IDE=y # # SCSI device support # +CONFIG_SCSI_MOD=y # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_DMA is not set @@ -965,6 +940,7 @@ CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_TIMBERDALE is not set CONFIG_UNIX98_PTYS=y # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y @@ -993,6 +969,7 @@ CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set # CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set # # External I2C/SMBus adapter drivers @@ -1006,15 +983,9 @@ CONFIG_I2C_PXA=y # # CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -1046,10 +1017,12 @@ CONFIG_GPIO_SYSFS=y # # Memory mapped GPIO expanders: # +# CONFIG_GPIO_IT8761E is not set # # I2C GPIO expanders: # +# CONFIG_GPIO_MAX7300 is not set # CONFIG_GPIO_MAX732X is not set # CONFIG_GPIO_PCA953X is not set # CONFIG_GPIO_PCF857X is not set @@ -1093,10 +1066,12 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set # CONFIG_TPS65010 is not set # CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set @@ -1105,22 +1080,25 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TC6393XB is not set CONFIG_PMIC_DA903X=y # CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM831X is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set # CONFIG_MFD_PCF50633 is not set # CONFIG_MFD_MC13783 is not set # CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set -# CONFIG_MFD_88PM8607 is not set # CONFIG_AB4500_CORE is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_DEBUG=y +# CONFIG_REGULATOR_DUMMY is not set # CONFIG_REGULATOR_FIXED_VOLTAGE is not set CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_USERSPACE_CONSUMER=y # CONFIG_REGULATOR_BQ24022 is not set # CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set # CONFIG_REGULATOR_MAX8660 is not set CONFIG_REGULATOR_DA903X=y # CONFIG_REGULATOR_LP3971 is not set @@ -1218,6 +1196,7 @@ CONFIG_VIDEO_IR_I2C=y # CONFIG_VIDEO_SAA7191 is not set # CONFIG_VIDEO_TVP514X is not set # CONFIG_VIDEO_TVP5150 is not set +# CONFIG_VIDEO_TVP7002 is not set # CONFIG_VIDEO_VPX3220 is not set # @@ -1264,15 +1243,7 @@ CONFIG_SOC_CAMERA_MT9M111=y CONFIG_VIDEO_PXA27x=y # CONFIG_VIDEO_SH_MOBILE_CEU is not set # CONFIG_V4L_USB_DRIVERS is not set -CONFIG_RADIO_ADAPTERS=y -# CONFIG_I2C_SI4713 is not set -# CONFIG_RADIO_SI4713 is not set -# CONFIG_USB_DSBR is not set -# CONFIG_RADIO_SI470X is not set -# CONFIG_USB_MR800 is not set -CONFIG_RADIO_TEA5764=y -CONFIG_RADIO_TEA5764_XTAL=y -# CONFIG_RADIO_TEF6862 is not set +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -1398,8 +1369,6 @@ CONFIG_HID=y # # Special HID drivers # -CONFIG_HID_APPLE=m -# CONFIG_HID_WACOM is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1477,7 +1446,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1489,7 +1457,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1529,6 +1496,7 @@ CONFIG_USB_ETH=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set # CONFIG_USB_G_MULTI is not set # @@ -1555,8 +1523,6 @@ CONFIG_SDIO_UART=m # CONFIG_MMC_PXA=y # CONFIG_MMC_SDHCI is not set -# CONFIG_MMC_AT91 is not set -# CONFIG_MMC_ATMELMCI is not set CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1574,11 +1540,11 @@ CONFIG_LEDS_LP3944=y # CONFIG_LEDS_REGULATOR is not set # CONFIG_LEDS_BD2802 is not set # CONFIG_LEDS_LT3593 is not set +CONFIG_LEDS_TRIGGERS=y # # LED Triggers # -CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_LEDS_TRIGGER_BACKLIGHT=y @@ -1656,7 +1622,7 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # # CONFIG_RTC_DRV_SA1100 is not set -# CONFIG_RTC_DRV_PXA is not set +CONFIG_RTC_DRV_PXA=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set @@ -1681,19 +1647,10 @@ CONFIG_EXT3_FS_XATTR=y CONFIG_JBD=m # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y +# CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_XFS_DEBUG is not set +# CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set # CONFIG_NILFS2_FS is not set @@ -1716,9 +1673,7 @@ CONFIG_CUSE=m # # CD-ROM/DVD Filesystems # -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y +# CONFIG_ISO9660_FS is not set # CONFIG_UDF_FS is not set # @@ -1750,12 +1705,14 @@ CONFIG_MISC_FILESYSTEMS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=m +CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set +CONFIG_JFFS2_FS_WBUF_VERIFY=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_FS_XATTR=y +CONFIG_JFFS2_FS_POSIX_ACL=y +CONFIG_JFFS2_FS_SECURITY=y CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_LZO=y @@ -1765,6 +1722,7 @@ CONFIG_JFFS2_RUBIN=y CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set # CONFIG_JFFS2_CMODE_FAVOURLZO is not set +# CONFIG_LOGFS is not set CONFIG_CRAMFS=m CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_EMBEDDED is not set @@ -1802,6 +1760,7 @@ CONFIG_SUNRPC=y # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set +# CONFIG_CEPH_FS is not set CONFIG_CIFS=m CONFIG_CIFS_STATS=y # CONFIG_CIFS_STATS2 is not set @@ -1895,6 +1854,7 @@ CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y +# CONFIG_PROVE_RCU is not set CONFIG_LOCKDEP=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_LOCKDEP is not set @@ -1918,6 +1878,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set @@ -2061,9 +2022,9 @@ CONFIG_CRC32=y CONFIG_CRC7=y CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y CONFIG_DECOMPRESS_GZIP=y CONFIG_DECOMPRESS_BZIP2=y CONFIG_DECOMPRESS_LZMA=y @@ -2075,3 +2036,4 @@ CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_NLATTR=y +CONFIG_GENERIC_ATOMIC64=y diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig index 75cae18fbcb6..de0c28aa43e7 100644 --- a/arch/arm/configs/n770_defconfig +++ b/arch/arm/configs/n770_defconfig @@ -308,6 +308,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND_UP_POSSIBLE=y CONFIG_SUSPEND=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y # # Networking diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig index e6f667c5e58a..9405e32783de 100644 --- a/arch/arm/configs/n8x0_defconfig +++ b/arch/arm/configs/n8x0_defconfig @@ -191,6 +191,7 @@ CONFIG_ARCH_OMAP=y # CONFIG_ARCH_OMAP_OTG=y # CONFIG_ARCH_OMAP1 is not set +CONFIG_ARCH_OMAP2PLUS=y CONFIG_ARCH_OMAP2=y # CONFIG_ARCH_OMAP3 is not set # CONFIG_ARCH_OMAP4 is not set @@ -198,8 +199,6 @@ CONFIG_ARCH_OMAP2=y # # OMAP Feature Selections # -# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set -# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set CONFIG_OMAP_RESET_CLOCKS=y # CONFIG_OMAP_MUX is not set # CONFIG_OMAP_MCBSP is not set @@ -208,15 +207,13 @@ CONFIG_OMAP_MBOX_FWK=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_32K_TIMER_HZ=128 CONFIG_OMAP_DM_TIMER=y -# CONFIG_OMAP_LL_DEBUG_UART1 is not set -# CONFIG_OMAP_LL_DEBUG_UART2 is not set -CONFIG_OMAP_LL_DEBUG_UART3=y +# CONFIG_OMAP_PM_NONE is not set +CONFIG_OMAP_PM_NOOP=y # CONFIG_MACH_OMAP_GENERIC is not set # # OMAP Core Type # -CONFIG_ARCH_OMAP24XX=y CONFIG_ARCH_OMAP2420=y # CONFIG_ARCH_OMAP2430 is not set @@ -227,6 +224,9 @@ CONFIG_MACH_OMAP2_TUSB6010=y # CONFIG_MACH_OMAP_H4 is not set # CONFIG_MACH_OMAP_APOLLON is not set # CONFIG_MACH_OMAP_2430SDP is not set +CONFIG_MACH_NOKIA_N800=y +CONFIG_MACH_NOKIA_N810=y +CONFIG_MACH_NOKIA_N810_WIMAX=y CONFIG_MACH_NOKIA_N8X0=y # @@ -303,7 +303,7 @@ CONFIG_ALIGNMENT_TRAP=y CONFIG_ZBOOT_ROM_TEXT=0x10C08000 CONFIG_ZBOOT_ROM_BSS=0x10200000 # CONFIG_ZBOOT_ROM is not set -CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8" +CONFIG_CMDLINE="root=/dev/mmcblk0p2 console=ttyS2,115200n8 debug earlyprintk rootwait" # CONFIG_XIP_KERNEL is not set # CONFIG_KEXEC is not set @@ -337,7 +337,14 @@ CONFIG_HAVE_AOUT=y # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +# CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y +CONFIG_PM_OPS=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -617,7 +624,55 @@ CONFIG_UNIX98_PTYS=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_COMPAT is not set +# CONFIG_I2C_CHARDEV is not set +# CONFIG_I2C_HELPER_AUTO is not set +# CONFIG_I2C_SMBUS is not set + +# +# I2C Algorithms +# +# CONFIG_I2C_ALGOBIT is not set +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_DESIGNWARE is not set +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_OMAP=y +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_XILINX is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -673,15 +728,44 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_CORE is not set +# CONFIG_MFD_88PM860X is not set # CONFIG_MFD_SM501 is not set # CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_EGPIO is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_HTC_I2CPLD is not set +# CONFIG_TPS65010 is not set +CONFIG_MENELAUS=y +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_T7L66XB is not set # CONFIG_MFD_TC6387XB is not set # CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_PMIC_ADP5520 is not set +# CONFIG_MFD_MAX8925 is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM831X is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_WM8994 is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_MFD_MC13783 is not set +# CONFIG_AB3100_CORE is not set # CONFIG_EZX_PCAP is not set +# CONFIG_AB4500_CORE is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_DUMMY is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_REGULATOR_MAX1586 is not set +# CONFIG_REGULATOR_MAX8649 is not set +# CONFIG_REGULATOR_MAX8660 is not set +# CONFIG_REGULATOR_LP3971 is not set +# CONFIG_REGULATOR_TPS65023 is not set +# CONFIG_REGULATOR_TPS6507X is not set # CONFIG_MEDIA_SUPPORT is not set # @@ -718,7 +802,10 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set +CONFIG_USB_SUSPEND=y +CONFIG_USB_OTG=y +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -737,9 +824,10 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_MUSB_HDRC=y CONFIG_USB_TUSB6010=y # CONFIG_USB_MUSB_HOST is not set -CONFIG_USB_MUSB_PERIPHERAL=y -# CONFIG_USB_MUSB_OTG is not set +# CONFIG_USB_MUSB_PERIPHERAL is not set +CONFIG_USB_MUSB_OTG=y CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_USB_MUSB_HDRC_HCD=y # CONFIG_MUSB_PIO_ONLY is not set # CONFIG_USB_INVENTRA_DMA is not set # CONFIG_USB_TI_CPPI_DMA is not set @@ -824,44 +912,77 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set # CONFIG_USB_AUDIO is not set CONFIG_USB_ETH=y -# CONFIG_USB_ETH_RNDIS is not set +CONFIG_USB_ETH_RNDIS=y +CONFIG_USB_ETH_EEM=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set +# CONFIG_USB_MASS_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set +# CONFIG_USB_G_NOKIA is not set +# CONFIG_USB_G_MULTI is not set # # OTG and related infrastructure # CONFIG_USB_OTG_UTILS=y # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_ISP1301_OMAP is not set +# CONFIG_USB_ULPI is not set CONFIG_NOP_USB_XCEIV=y -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_OMAP=y +# CONFIG_MMC_SPI is not set # CONFIG_MEMSTICK is not set -# CONFIG_ACCESSIBILITY is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set -# CONFIG_REGULATOR is not set # CONFIG_UIO is not set + +# +# TI VLYNQ +# # CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set +CONFIG_EXT3_FS_XATTR=y +# CONFIG_EXT3_FS_POSIX_ACL is not set +# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_BTRFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_FILE_LOCKING=y CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y @@ -886,8 +1007,11 @@ CONFIG_INOTIFY_USER=y # # DOS/FAT/NT Filesystems # +CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_NTFS_FS is not set # @@ -934,7 +1058,6 @@ CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set -# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index c7999f5b1c9a..5a9e95fa728b 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -324,6 +324,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig index 714835e5ebec..d6ad92177324 100644 --- a/arch/arm/configs/omap3_defconfig +++ b/arch/arm/configs/omap3_defconfig @@ -450,7 +450,7 @@ CONFIG_SUSPEND=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig index e2ad859fbec6..a6dd6d1af806 100644 --- a/arch/arm/configs/omap3_evm_defconfig +++ b/arch/arm/configs/omap3_evm_defconfig @@ -340,6 +340,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig index 74fe6be9c5ec..968fbaa8f04d 100644 --- a/arch/arm/configs/omap3_touchbook_defconfig +++ b/arch/arm/configs/omap3_touchbook_defconfig @@ -368,7 +368,7 @@ CONFIG_SUSPEND=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig index bb2917e5cb47..ddde429a7d9b 100644 --- a/arch/arm/configs/omap_3430sdp_defconfig +++ b/arch/arm/configs/omap_3430sdp_defconfig @@ -363,6 +363,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig index d25c3d4424ca..609f348b1055 100644 --- a/arch/arm/configs/omap_3630sdp_defconfig +++ b/arch/arm/configs/omap_3630sdp_defconfig @@ -361,7 +361,7 @@ CONFIG_SUSPEND=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index 523189586a4b..91ef2ed0f80a 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -331,6 +331,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig index a82e81332a03..881faea03d79 100644 --- a/arch/arm/configs/omap_zoom2_defconfig +++ b/arch/arm/configs/omap_zoom2_defconfig @@ -343,6 +343,7 @@ CONFIG_SUSPEND=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -660,7 +661,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig index ff8ac3dcc31d..5e55b550a408 100644 --- a/arch/arm/configs/omap_zoom3_defconfig +++ b/arch/arm/configs/omap_zoom3_defconfig @@ -361,7 +361,7 @@ CONFIG_SUSPEND=y # CONFIG_PM_TEST_SUSPEND is not set CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set -# CONFIG_PM_RUNTIME is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -680,7 +680,7 @@ CONFIG_DEVKMEM=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=32 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=1 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig index 193bd334fbbf..473f9e13f08b 100644 --- a/arch/arm/configs/rx51_defconfig +++ b/arch/arm/configs/rx51_defconfig @@ -59,8 +59,6 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set # CONFIG_CGROUPS is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y @@ -322,6 +320,7 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_APM_EMULATION is not set +CONFIG_PM_RUNTIME=y CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -479,7 +478,6 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIBFUSB is not set # CONFIG_BT_HCIVHCI is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 00f46d9ce299..6e8f05c8a1c8 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -149,10 +149,10 @@ #define USER(x...) \ 9999: x; \ - .section __ex_table,"a"; \ + .pushsection __ex_table,"a"; \ .align 3; \ .long 9999b,9001f; \ - .previous + .popsection /* * SMP data memory barrier @@ -193,10 +193,10 @@ .error "Unsupported inc macro argument" .endif - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 9999b, \abort - .previous + .popsection .endm .macro usracc, instr, reg, ptr, inc, cond, rept, abort @@ -234,10 +234,10 @@ .error "Unsupported inc macro argument" .endif - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 9999b, \abort - .previous + .popsection .endr .endm diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 72da7e045c6b..0d08d4170b64 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -15,6 +15,7 @@ #include #include #include +#include #define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) @@ -219,12 +220,6 @@ struct cpu_cache_fns { void (*dma_flush_range)(const void *, const void *); }; -struct outer_cache_fns { - void (*inv_range)(unsigned long, unsigned long); - void (*clean_range)(unsigned long, unsigned long); - void (*flush_range)(unsigned long, unsigned long); -}; - /* * Select the calling method */ @@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *); #endif -#ifdef CONFIG_OUTER_CACHE - -extern struct outer_cache_fns outer_cache; - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ - if (outer_cache.inv_range) - outer_cache.inv_range(start, end); -} -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ - if (outer_cache.clean_range) - outer_cache.clean_range(start, end); -} -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ - if (outer_cache.flush_range) - outer_cache.flush_range(start, end); -} - -#else - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ } -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ } -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ } - -#endif - /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h index 7a0690da5e63..b56c1389b6fa 100644 --- a/arch/arm/include/asm/clkdev.h +++ b/arch/arm/include/asm/clkdev.h @@ -13,6 +13,7 @@ #define __ASM_CLKDEV_H struct clk; +struct device; struct clk_lookup { struct list_head node; diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index a399bb5730f1..51662feb9f1d 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -9,6 +9,8 @@ #include #include +struct task_struct; + typedef unsigned long elf_greg_t; typedef unsigned long elf_freg_t[3]; @@ -98,6 +100,7 @@ extern int elf_check_arch(const struct elf32_hdr *); extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int); #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk) +struct task_struct; int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs); #define ELF_CORE_COPY_TASK_REGS dump_task_regs diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index bfcc15929a7f..540a044153a5 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -21,14 +21,14 @@ "2: strt %0, [%2]\n" \ " mov %0, #0\n" \ "3:\n" \ - " .section __ex_table,\"a\"\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4f, 2b, 4f\n" \ - " .previous\n" \ - " .section .fixup,\"ax\"\n" \ + " .popsection\n" \ + " .pushsection .fixup,\"ax\"\n" \ "4: mov %0, %4\n" \ " b 3b\n" \ - " .previous" \ + " .popsection" \ : "=&r" (ret), "=&r" (oldval) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -102,14 +102,14 @@ futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval) " it eq @ explicit IT needed for the 2b label\n" "2: streqt %2, [%3]\n" "3:\n" - " .section __ex_table,\"a\"\n" + " .pushsection __ex_table,\"a\"\n" " .align 3\n" " .long 1b, 4f, 2b, 4f\n" - " .previous\n" - " .section .fixup,\"ax\"\n" + " .popsection\n" + " .pushsection .fixup,\"ax\"\n" "4: mov %0, %4\n" " b 3b\n" - " .previous" + " .popsection" : "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) : "cc", "memory"); diff --git a/arch/arm/include/asm/highmem.h b/arch/arm/include/asm/highmem.h index 7f36d00600b4..feb988a7ec37 100644 --- a/arch/arm/include/asm/highmem.h +++ b/arch/arm/include/asm/highmem.h @@ -11,7 +11,11 @@ #define kmap_prot PAGE_KERNEL -#define flush_cache_kmaps() flush_cache_all() +#define flush_cache_kmaps() \ + do { \ + if (cache_is_vivt()) \ + flush_cache_all(); \ + } while (0) extern pte_t *pkmap_page_table; @@ -21,11 +25,20 @@ extern void *kmap_high(struct page *page); extern void *kmap_high_get(struct page *page); extern void kunmap_high(struct page *page); +extern void *kmap_high_l1_vipt(struct page *page, pte_t *saved_pte); +extern void kunmap_high_l1_vipt(struct page *page, pte_t saved_pte); + +/* + * The following functions are already defined by + * when CONFIG_HIGHMEM is not set. + */ +#ifdef CONFIG_HIGHMEM extern void *kmap(struct page *page); extern void kunmap(struct page *page); extern void *kmap_atomic(struct page *page, enum km_type type); extern void kunmap_atomic(void *kvaddr, enum km_type type); extern void *kmap_atomic_pfn(unsigned long pfn, enum km_type type); extern struct page *kmap_atomic_to_page(const void *ptr); +#endif #endif diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 328f14a8b790..237282f7c762 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ struct irqaction; +struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); diff --git a/arch/arm/include/asm/kmap_types.h b/arch/arm/include/asm/kmap_types.h index c019949a5189..c4b2ea3fbe42 100644 --- a/arch/arm/include/asm/kmap_types.h +++ b/arch/arm/include/asm/kmap_types.h @@ -18,6 +18,7 @@ enum km_type { KM_IRQ1, KM_SOFTIRQ0, KM_SOFTIRQ1, + KM_L1_CACHE, KM_L2_CACHE, KM_TYPE_NR }; diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h new file mode 100644 index 000000000000..25f76bae57ab --- /dev/null +++ b/arch/arm/include/asm/outercache.h @@ -0,0 +1,75 @@ +/* + * arch/arm/include/asm/outercache.h + * + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_OUTERCACHE_H +#define __ASM_OUTERCACHE_H + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); +#ifdef CONFIG_OUTER_CACHE_SYNC + void (*sync)(void); +#endif +}; + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } + +#endif + +#ifdef CONFIG_OUTER_CACHE_SYNC +static inline void outer_sync(void) +{ + if (outer_cache.sync) + outer_cache.sync(); +} +#else +static inline void outer_sync(void) +{ } +#endif + +#endif /* __ASM_OUTERCACHE_H */ diff --git a/arch/arm/include/asm/pgtable-nommu.h b/arch/arm/include/asm/pgtable-nommu.h index 013cfcdc4839..ffc0e85775b4 100644 --- a/arch/arm/include/asm/pgtable-nommu.h +++ b/arch/arm/include/asm/pgtable-nommu.h @@ -67,6 +67,7 @@ static inline int pte_file(pte_t pte) { return 0; } */ #define pgprot_noncached(prot) __pgprot(0) #define pgprot_writecombine(prot) __pgprot(0) +#define pgprot_dmacoherent(prot) __pgprot(0) /* diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index ca88e6a84707..4ace45ec3ef8 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -60,6 +60,8 @@ #include #include +#include + #define __exception __attribute__((section(".exception.text"))) struct thread_info; @@ -137,10 +139,12 @@ extern unsigned int user_debug; #define dmb() __asm__ __volatile__ ("" : : : "memory") #endif -#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) -#define mb() dmb() +#ifdef CONFIG_ARCH_HAS_BARRIERS +#include +#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dmb() -#define wmb() dmb() +#define wmb() mb() #else #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) @@ -152,9 +156,9 @@ extern unsigned int user_debug; #define smp_rmb() barrier() #define smp_wmb() barrier() #else -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() #endif #define read_barrier_depends() do { } while(0) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 1d6bd40a4322..33e4a48fe103 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -229,16 +229,16 @@ do { \ __asm__ __volatile__( \ "1: ldrbt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "=&r" (x) \ : "r" (addr), "i" (-EFAULT) \ : "cc") @@ -265,16 +265,16 @@ do { \ __asm__ __volatile__( \ "1: ldrt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " mov %1, #0\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "=&r" (x) \ : "r" (addr), "i" (-EFAULT) \ : "cc") @@ -310,15 +310,15 @@ do { \ __asm__ __volatile__( \ "1: strbt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err) \ : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ : "cc") @@ -343,15 +343,15 @@ do { \ __asm__ __volatile__( \ "1: strt %1,[%2]\n" \ "2:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "3: mov %0, %3\n" \ " b 2b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 3b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err) \ : "r" (x), "r" (__pu_addr), "i" (-EFAULT) \ : "cc") @@ -371,16 +371,16 @@ do { \ THUMB( "1: strt " __reg_oper1 ", [%1]\n" ) \ THUMB( "2: strt " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ - " .section .fixup,\"ax\"\n" \ + " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ "4: mov %0, %3\n" \ " b 3b\n" \ - " .previous\n" \ - " .section __ex_table,\"a\"\n" \ + " .popsection\n" \ + " .pushsection __ex_table,\"a\"\n" \ " .align 3\n" \ " .long 1b, 4b\n" \ " .long 2b, 4b\n" \ - " .previous" \ + " .popsection" \ : "+r" (err), "+r" (__pu_addr) \ : "r" (x), "i" (-EFAULT) \ : "cc") diff --git a/arch/arm/include/asm/ucontext.h b/arch/arm/include/asm/ucontext.h index bf65e9f4525d..47f023aa8495 100644 --- a/arch/arm/include/asm/ucontext.h +++ b/arch/arm/include/asm/ucontext.h @@ -59,23 +59,22 @@ struct iwmmxt_sigframe { #endif /* CONFIG_IWMMXT */ #ifdef CONFIG_VFP -#if __LINUX_ARM_ARCH__ < 6 -/* For ARM pre-v6, we use fstmiax and fldmiax. This adds one extra - * word after the registers, and a word of padding at the end for - * alignment. */ #define VFP_MAGIC 0x56465001 -#define VFP_STORAGE_SIZE 152 -#else -#define VFP_MAGIC 0x56465002 -#define VFP_STORAGE_SIZE 144 -#endif struct vfp_sigframe { unsigned long magic; unsigned long size; - union vfp_state storage; -}; + struct user_vfp ufp; + struct user_vfp_exc ufp_exc; +} __attribute__((__aligned__(8))); + +/* + * 8 byte for magic and size, 264 byte for ufp, 12 bytes for ufp_exc, + * 4 bytes padding. + */ +#define VFP_STORAGE_SIZE sizeof(struct vfp_sigframe) + #endif /* CONFIG_VFP */ /* @@ -91,7 +90,7 @@ struct aux_sigframe { #ifdef CONFIG_IWMMXT struct iwmmxt_sigframe iwmmxt; #endif -#if 0 && defined CONFIG_VFP /* Not yet saved. */ +#ifdef CONFIG_VFP struct vfp_sigframe vfp; #endif /* Something that isn't a valid magic number for any coprocessor. */ diff --git a/arch/arm/include/asm/user.h b/arch/arm/include/asm/user.h index df95e050f9dd..05ac4b06876a 100644 --- a/arch/arm/include/asm/user.h +++ b/arch/arm/include/asm/user.h @@ -83,11 +83,21 @@ struct user{ /* * User specific VFP registers. If only VFPv2 is present, registers 16 to 31 - * are ignored by the ptrace system call. + * are ignored by the ptrace system call and the signal handler. */ struct user_vfp { unsigned long long fpregs[32]; unsigned long fpscr; }; +/* + * VFP exception registers exposed to user space during signal delivery. + * Fields not relavant to the current VFP architecture are ignored. + */ +struct user_vfp_exc { + unsigned long fpexc; + unsigned long fpinst; + unsigned long fpinst2; +}; + #endif /* _ARM_USER_H */ diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 6c5cf369183b..7ee48e7f8f31 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -523,16 +523,16 @@ ENDPROC(__und_usr) /* * The out of line fixup for the ldrt above. */ - .section .fixup, "ax" + .pushsection .fixup, "ax" 4: mov pc, r9 - .previous - .section __ex_table,"a" + .popsection + .pushsection __ex_table,"a" .long 1b, 4b #if __LINUX_ARM_ARCH__ >= 7 .long 2b, 4b .long 3b, 4b #endif - .previous + .popsection /* * Check whether the instruction is a co-processor instruction. @@ -676,10 +676,10 @@ do_fpe: * lr = unrecognised FP instruction return address */ - .data + .pushsection .data ENTRY(fp_enter) .word no_fp - .previous + .popsection ENTRY(no_fp) mov pc, lr diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 7e9ed1eea40a..d93f976fb389 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -102,6 +102,8 @@ .else ldmdb sp, {r0 - lr}^ @ get calling r0 - lr .endif + mov r0, r0 @ ARMv5T and earlier require a nop + @ after ldm {}^ add sp, sp, #S_FRAME_SIZE - S_PC movs pc, lr @ return & move spsr_svc into cpsr .endm diff --git a/arch/arm/kernel/ftrace.c b/arch/arm/kernel/ftrace.c index c63842766229..0298286ad4ad 100644 --- a/arch/arm/kernel/ftrace.c +++ b/arch/arm/kernel/ftrace.c @@ -62,15 +62,15 @@ int ftrace_modify_code(unsigned long pc, unsigned char *old_code, " movne %0, #2 \n" "3:\n" - ".section .fixup, \"ax\"\n" + ".pushsection .fixup, \"ax\"\n" "4: mov %0, #1 \n" " b 3b \n" - ".previous\n" + ".popsection\n" - ".section __ex_table, \"a\"\n" + ".pushsection __ex_table, \"a\"\n" " .long 1b, 4b \n" " .long 2b, 4b \n" - ".previous\n" + ".popsection\n" : "=r"(err), "=r"(replaced) : "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index b7cb45bb91e8..3b3d2c80509c 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/kernel/kgdb.c b/arch/arm/kernel/kgdb.c index ba8ccfede964..a5b846b9895d 100644 --- a/arch/arm/kernel/kgdb.c +++ b/arch/arm/kernel/kgdb.c @@ -9,6 +9,7 @@ * Authors: George Davis * Deepak Saxena */ +#include #include #include @@ -158,6 +159,18 @@ static struct undef_hook kgdb_compiled_brkpt_hook = { .fn = kgdb_compiled_brk_fn }; +static void kgdb_call_nmi_hook(void *ignored) +{ + kgdb_nmicallback(raw_smp_processor_id(), get_irq_regs()); +} + +void kgdb_roundup_cpus(unsigned long flags) +{ + local_irq_enable(); + smp_call_function(kgdb_call_nmi_hook, NULL, 0); + local_irq_disable(); +} + /** * kgdb_arch_init - Perform any architecture specific initalization. * diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 60c62c377fa9..2ba7deb3072e 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include @@ -393,6 +394,14 @@ void __kprobes jprobe_return(void) /* * Setup an empty pt_regs. Fill SP and PC fields as * they're needed by longjmp_break_handler. + * + * We allocate some slack between the original SP and start of + * our fabricated regs. To be precise we want to have worst case + * covered which is STMFD with all 16 regs so we allocate 2 * + * sizeof(struct_pt_regs)). + * + * This is to prevent any simulated instruction from writing + * over the regs when they are accessing the stack. */ "sub sp, %0, %1 \n\t" "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" @@ -410,7 +419,7 @@ void __kprobes jprobe_return(void) "ldmia sp, {r0 - pc} \n\t" : : "r" (kcb->jprobe_saved_regs.ARM_sp), - "I" (sizeof(struct pt_regs)), + "I" (sizeof(struct pt_regs) * 2), "J" (offsetof(struct pt_regs, ARM_sp)), "J" (offsetof(struct pt_regs, ARM_pc)), "J" (offsetof(struct pt_regs, ARM_cpsr)) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index f28c5e9c51ea..c628bdf6c430 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -16,9 +16,9 @@ #include #include #include -#include #include #include +#include #include #include diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 3875d99cc40f..9e70f2053f9a 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -332,7 +332,8 @@ armpmu_reserve_hardware(void) for (i = 0; i < pmu_irqs->num_irqs; ++i) { err = request_irq(pmu_irqs->irqs[i], armpmu->handle_irq, - IRQF_DISABLED, "armpmu", NULL); + IRQF_DISABLED | IRQF_NOBALANCING, + "armpmu", NULL); if (err) { pr_warning("unable to request IRQ%d for ARM " "perf counters\n", pmu_irqs->irqs[i]); @@ -1624,7 +1625,7 @@ enum armv7_counters { /* * EVTSEL: Event selection reg */ -#define ARMV7_EVTSEL_MASK 0x7f /* Mask for writable bits */ +#define ARMV7_EVTSEL_MASK 0xff /* Mask for writable bits */ /* * SELECT: Counter selection reg diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index ba2adefa53f7..acf5e6fdb6dc 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -356,7 +355,7 @@ EXPORT_SYMBOL(dump_fpu); * the thread function, and r3 points to the exit function. */ extern void kernel_thread_helper(void); -asm( ".section .text\n" +asm( ".pushsection .text\n" " .align\n" " .type kernel_thread_helper, #function\n" "kernel_thread_helper:\n" @@ -364,11 +363,11 @@ asm( ".section .text\n" " mov lr, r3\n" " mov pc, r2\n" " .size kernel_thread_helper, . - kernel_thread_helper\n" -" .previous"); +" .popsection"); #ifdef CONFIG_ARM_UNWIND extern void kernel_thread_exit(long code); -asm( ".section .text\n" +asm( ".pushsection .text\n" " .align\n" " .type kernel_thread_exit, #function\n" "kernel_thread_exit:\n" @@ -378,7 +377,7 @@ asm( ".section .text\n" " nop\n" " .fnend\n" " .size kernel_thread_exit, . - kernel_thread_exit\n" -" .previous"); +" .popsection"); #else #define kernel_thread_exit do_exit #endif diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index e7714f367eb8..907d5a620bca 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "ptrace.h" #include "signal.h" @@ -175,6 +176,90 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame) #endif +#ifdef CONFIG_VFP + +static int preserve_vfp_context(struct vfp_sigframe __user *frame) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *h = &thread->vfpstate.hard; + const unsigned long magic = VFP_MAGIC; + const unsigned long size = VFP_STORAGE_SIZE; + int err = 0; + + vfp_sync_hwstate(thread); + __put_user_error(magic, &frame->magic, err); + __put_user_error(size, &frame->size, err); + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs, + sizeof(h->fpregs)); + /* + * Copy the status and control register. + */ + __put_user_error(h->fpscr, &frame->ufp.fpscr, err); + + /* + * Copy the exception registers. + */ + __put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err); + __put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); + __put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + + return err ? -EFAULT : 0; +} + +static int restore_vfp_context(struct vfp_sigframe __user *frame) +{ + struct thread_info *thread = current_thread_info(); + struct vfp_hard_struct *h = &thread->vfpstate.hard; + unsigned long magic; + unsigned long size; + unsigned long fpexc; + int err = 0; + + __get_user_error(magic, &frame->magic, err); + __get_user_error(size, &frame->size, err); + + if (err) + return -EFAULT; + if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE) + return -EINVAL; + + /* + * Copy the floating point registers. There can be unused + * registers see asm/hwcap.h for details. + */ + err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs, + sizeof(h->fpregs)); + /* + * Copy the status and control register. + */ + __get_user_error(h->fpscr, &frame->ufp.fpscr, err); + + /* + * Sanitise and restore the exception registers. + */ + __get_user_error(fpexc, &frame->ufp_exc.fpexc, err); + /* Ensure the VFP is enabled. */ + fpexc |= FPEXC_EN; + /* Ensure FPINST2 is invalid and the exception flag is cleared. */ + fpexc &= ~(FPEXC_EX | FPEXC_FP2V); + h->fpexc = fpexc; + + __get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err); + __get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err); + + if (!err) + vfp_flush_hwstate(thread); + + return err ? -EFAULT : 0; +} + +#endif + /* * Do a signal return; undo the signal stack. These are aligned to 64-bit. */ @@ -233,8 +318,8 @@ static int restore_sigframe(struct pt_regs *regs, struct sigframe __user *sf) err |= restore_iwmmxt_context(&aux->iwmmxt); #endif #ifdef CONFIG_VFP -// if (err == 0) -// err |= vfp_restore_state(&sf->aux.vfp); + if (err == 0) + err |= restore_vfp_context(&aux->vfp); #endif return err; @@ -348,8 +433,8 @@ setup_sigframe(struct sigframe __user *sf, struct pt_regs *regs, sigset_t *set) err |= preserve_iwmmxt_context(&aux->iwmmxt); #endif #ifdef CONFIG_VFP -// if (err == 0) -// err |= vfp_save_state(&sf->aux.vfp); + if (err == 0) + err |= preserve_vfp_context(&aux->vfp); #endif __put_user_error(0, &aux->end_magic, err); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 57162af53dc9..a01194e583ff 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -86,6 +86,12 @@ int __cpuinit __cpu_up(unsigned int cpu) return PTR_ERR(idle); } ci->idle = idle; + } else { + /* + * Since this idle thread is being re-used, call + * init_idle() to reinitialize the thread structure. + */ + init_idle(idle, cpu); } /* @@ -99,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu) *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) | PMD_TYPE_SECT | PMD_SECT_AP_WRITE); flush_pmd_entry(pmd); + outer_clean_range(__pa(pmd), __pa(pmd + 1)); /* * We need to tell the secondary core where to find @@ -106,7 +113,8 @@ int __cpuinit __cpu_up(unsigned int cpu) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); - wmb(); + __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); + outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); /* * Now bring the CPU into our world. diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 4350f75e578c..c23501842b98 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -27,6 +26,7 @@ #include #include #include +#include /* Fork a new task - this creates a new program thread. * This is called indirectly via a small wrapper diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index aaf7220d9e30..a673297b0cf1 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -110,13 +110,13 @@ no_frame: ldmfd sp!, {r4 - r8, pc} ENDPROC(__backtrace) ENDPROC(c_backtrace) - .section __ex_table,"a" + .pushsection __ex_table,"a" .align 3 .long 1001b, 1006b .long 1002b, 1006b .long 1003b, 1006b .long 1004b, 1006b - .previous + .popsection #define instr r4 #define reg r5 diff --git a/arch/arm/lib/clear_user.S b/arch/arm/lib/clear_user.S index 1279abd8b886..5e3f99620c04 100644 --- a/arch/arm/lib/clear_user.S +++ b/arch/arm/lib/clear_user.S @@ -46,8 +46,8 @@ USER( strnebt r2, [r0]) ldmfd sp!, {r1, pc} ENDPROC(__clear_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: ldmfd sp!, {r0, pc} - .previous + .popsection diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S index e4fe124acedc..66a477a3e3cc 100644 --- a/arch/arm/lib/copy_from_user.S +++ b/arch/arm/lib/copy_from_user.S @@ -90,7 +90,7 @@ ENTRY(__copy_from_user) ENDPROC(__copy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2} @@ -100,5 +100,5 @@ ENDPROC(__copy_from_user) bl __memzero ldr r0, [sp], #4 copy_abort_end - .previous + .popsection diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S index 1a71e1584442..027b69bdbad1 100644 --- a/arch/arm/lib/copy_to_user.S +++ b/arch/arm/lib/copy_to_user.S @@ -94,12 +94,12 @@ WEAK(__copy_to_user) ENDPROC(__copy_to_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 copy_abort_preamble ldmfd sp!, {r1, r2, r3} sub r0, r0, r1 rsb r0, r0, r2 copy_abort_end - .previous + .popsection diff --git a/arch/arm/lib/csumpartialcopyuser.S b/arch/arm/lib/csumpartialcopyuser.S index fd0e9dcd9fdc..59ff6fdc1e63 100644 --- a/arch/arm/lib/csumpartialcopyuser.S +++ b/arch/arm/lib/csumpartialcopyuser.S @@ -68,7 +68,7 @@ * so properly, we would have to add in whatever registers were loaded before * the fault, which, with the current asm above is not predictable. */ - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 4 9001: mov r4, #-EFAULT ldr r5, [fp, #4] @ *err_ptr @@ -80,4 +80,4 @@ strneb r0, [r1], #1 bne 9002b load_regs - .previous + .popsection diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index a1814d927122..b1631a7dbe75 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -64,9 +64,9 @@ __get_user_bad: mov pc, lr ENDPROC(__get_user_bad) -.section __ex_table, "a" +.pushsection __ex_table, "a" .long 1b, __get_user_bad .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad -.previous +.popsection diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 5025c863713d..938fc14f962d 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -74,7 +74,7 @@ ENTRY(memmove) rsb ip, ip, #32 addne pc, pc, ip @ C is always clear here b 7f -6: nop +6: W(nop) W(ldr) r3, [r1, #-4]! W(ldr) r4, [r1, #-4]! W(ldr) r5, [r1, #-4]! @@ -85,7 +85,7 @@ ENTRY(memmove) add pc, pc, ip nop - nop + W(nop) W(str) r3, [r0, #-4]! W(str) r4, [r0, #-4]! W(str) r5, [r0, #-4]! diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 02fedbf07c0d..5a01a23c6c06 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -81,11 +81,11 @@ __put_user_bad: mov pc, lr ENDPROC(__put_user_bad) -.section __ex_table, "a" +.pushsection __ex_table, "a" .long 1b, __put_user_bad .long 2b, __put_user_bad .long 3b, __put_user_bad .long 4b, __put_user_bad .long 5b, __put_user_bad .long 6b, __put_user_bad -.previous +.popsection diff --git a/arch/arm/lib/strncpy_from_user.S b/arch/arm/lib/strncpy_from_user.S index 1c9814f346c6..f202d7bd1647 100644 --- a/arch/arm/lib/strncpy_from_user.S +++ b/arch/arm/lib/strncpy_from_user.S @@ -33,11 +33,11 @@ ENTRY(__strncpy_from_user) mov pc, lr ENDPROC(__strncpy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: mov r3, #0 strb r3, [r0, #0] @ null terminate mov r0, #-EFAULT mov pc, lr - .previous + .popsection diff --git a/arch/arm/lib/strnlen_user.S b/arch/arm/lib/strnlen_user.S index 7855b2906659..0ecbb459c4f1 100644 --- a/arch/arm/lib/strnlen_user.S +++ b/arch/arm/lib/strnlen_user.S @@ -33,8 +33,8 @@ ENTRY(__strnlen_user) mov pc, lr ENDPROC(__strnlen_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: mov r0, #0 mov pc, lr - .previous + .popsection diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index ffdd27498cee..fee9f6f88adb 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -279,10 +279,10 @@ USER( strgtbt r3, [r0], #1) @ May fault b .Lc2u_finished ENDPROC(__copy_to_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 9001: ldmfd sp!, {r0, r4 - r7, pc} - .previous + .popsection /* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); * Purpose : copy a block from user memory to kernel memory @@ -545,7 +545,7 @@ USER( ldrgtbt r3, [r1], #1) @ May fault b .Lcfu_finished ENDPROC(__copy_from_user) - .section .fixup,"ax" + .pushsection .fixup,"ax" .align 0 /* * We took an exception. r0 contains a pointer to @@ -559,5 +559,5 @@ ENDPROC(__copy_from_user) blne __memzero mov r0, r4 ldmfd sp!, {r4 - r7, pc} - .previous + .popsection diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 6b967ffb6552..e2d2f2cd0c4f 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -16,6 +16,7 @@ #include #include #include /* for in_atomic() */ +#include #include #include diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b5c5fc6ba3a9..3ef68330452a 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 027dd570dcc3..d4004557532a 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -16,8 +16,8 @@ obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_d obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o - obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 29cf83177484..c11fd47aec5d 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -271,10 +271,12 @@ static void __init ek_add_device_buttons(void) {} static struct i2c_board_info __initdata ek_i2c_devices[] = { - { - I2C_BOARD_INFO("24c512", 0x50), - I2C_BOARD_INFO("wm8731", 0x1b), - }, + { + I2C_BOARD_INFO("24c512", 0x50) + }, + { + I2C_BOARD_INFO("wm8731", 0x1b) + }, }; diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 987fab3d846a..9c5b48e68a71 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -175,8 +175,6 @@ ENTRY(at91_slow_clock) orr r3, r3, #(1 << 29) /* bit 29 always set */ str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] - wait_pllalock - /* Save PLLB setting and disable it */ ldr r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] str r3, .saved_pllbr @@ -184,8 +182,6 @@ ENTRY(at91_slow_clock) mov r3, #AT91_PMC_PLLCOUNT str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] - wait_pllblock - /* Turn off the main oscillator */ ldr r3, [r1, #(AT91_CKGR_MOR - AT91_PMC)] bic r3, r3, #AT91_PMC_MOSCEN @@ -205,13 +201,25 @@ ENTRY(at91_slow_clock) ldr r3, .saved_pllbr str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + tst r3, #(AT91_PMC_MUL & 0xff0000) + bne 1f + tst r3, #(AT91_PMC_MUL & ~0xff0000) + beq 2f +1: wait_pllblock +2: /* Restore PLLA setting */ ldr r3, .saved_pllar str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + tst r3, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst r3, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: wait_pllalock +4: #ifdef SLOWDOWN_MASTER_CLOCK /* diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 7b20fccb9d4e..29c0a911df26 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -28,6 +28,7 @@ #include #include #include +#include #include @@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring); int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ int dirtied /* non-zero if any of the pages were modified */ ) { + + int rc = 0; int regionIdx; int segmentIdx; DMA_Region_t *region; DMA_Segment_t *segment; + down(&memMap->lock); + for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { region = &memMap->region[regionIdx]; @@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ printk(KERN_ERR "%s: vmalloc'd pages are not yet supported\n", __func__); - return -EINVAL; + rc = -EINVAL; + goto out; } case DMA_MEM_TYPE_KMALLOC: @@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ printk(KERN_ERR "%s: Unsupported memory type: %d\n", __func__, region->memType); - return -EINVAL; + rc = -EINVAL; + goto out; } } @@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ memMap->numRegionsUsed = 0; memMap->inUse = 0; +out: up(&memMap->lock); - return 0; + return rc; } EXPORT_SYMBOL(dma_unmap); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index d15beceb632e..df4ab2105869 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 27772e18e45b..0d6ee583f65c 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_MMCINT] = 7, [IRQ_DM365_MMCINT1] = 7, [IRQ_DM365_PWMINT3] = 7, - [IRQ_DDRINT] = 4, [IRQ_AEMIFINT] = 2, [IRQ_DM365_SDIOINT1] = 2, [IRQ_TINT0_TINT12] = 7, diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15dd886df04c..53137387aee1 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -23,6 +23,7 @@ #include #include #include +#include #include @@ -1266,7 +1267,8 @@ int edma_start(unsigned channel) /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending error */ + /* Clear any pending event or error */ + edma_write_array(ctlr, EDMA_ECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ edma_shadow0_write_array(ctlr, SH_SECR, j, mask); diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index cc9be7fee627..03acfd39042b 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -3,7 +3,7 @@ * * Author: Mark A. Greer * - * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -13,7 +13,9 @@ #include