dt-bindings: mmc: sdhci-am654: Document bindings for the host controllers on TI's J7200 devices
Add binding documentation for mmc host controllers present on TI's J7200 SOC Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200802070114.9624-1-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This commit is contained in:
parent
9481b45ca9
commit
d99654f623
|
@ -12,6 +12,8 @@ Required Properties:
|
|||
"ti,am654-sdhci-5.1": SDHCI on AM654 device.
|
||||
"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
|
||||
"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
|
||||
"ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
|
||||
"ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
|
||||
- reg: Must be two entries.
|
||||
- The first should be the sdhci register space
|
||||
- The second should the subsystem/phy register space
|
||||
|
@ -33,7 +35,9 @@ Required Properties:
|
|||
These bindings must be provided otherwise the driver will disable the
|
||||
corresponding speed mode (i.e. all nodes must provide at least -legacy)
|
||||
|
||||
Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
|
||||
Optional Properties (Required for ti,am654-sdhci-5.1,
|
||||
ti,j721e-sdhci-8bit,
|
||||
ti,j7200-sdhci-8bit):
|
||||
- ti,trm-icp: DLL trim select
|
||||
- ti,driver-strength-ohm: driver strength in ohms.
|
||||
Valid values are 33, 40, 50, 66 and 100 ohms.
|
||||
|
|
Loading…
Reference in New Issue