Add Phytium BT BMC driver support
adds a simple device driver to expose the BT interface
on Phytium SoC as a character device. Such SOCs are commonly
used as BMCs (BaseBoard Management Controllers) and this driver
implements the BMC side of the BT interface.
(cherry picked from commit ccb23948d0)
Signed-off-by: Alex Shi <alexsshi@tencent.com>
Conflicts:
drivers/char/ipmi/Kconfig
drivers/char/ipmi/Makefile
This commit is contained in:
LiQian
Jianping Liu
parent
cc9a49e2d6
commit
d978e4cfa4
|
|
@ -121,6 +121,15 @@ config PHYTIUM_KCS_IPMI_BMC
|
|||
The driver implements the BMC side of the KCS contorller, it
|
||||
provides the access of KCS IO space for BMC side.
|
||||
|
||||
config PHYTIUM_BT_IPMI_BMC
|
||||
depends on ARCH_PHYTIUM
|
||||
depends on REGMAP && REGMAP_MMIO && MFD_SYSCON
|
||||
tristate "PHYTIUM BT BMC driver"
|
||||
help
|
||||
Provides a driver for the BT (Block Transfer) interface found
|
||||
on Phytium SOCs. The driver implements the BMC side of
|
||||
the BT interface.
|
||||
|
||||
config NPCM7XX_KCS_IPMI_BMC
|
||||
depends on ARCH_NPCM7XX || COMPILE_TEST
|
||||
select IPMI_KCS_BMC
|
||||
|
|
|
|||
|
|
@ -27,4 +27,5 @@ obj-$(CONFIG_ASPEED_BT_IPMI_BMC) += bt-bmc.o
|
|||
obj-$(CONFIG_ASPEED_KCS_IPMI_BMC) += kcs_bmc_aspeed.o
|
||||
obj-$(CONFIG_NPCM7XX_KCS_IPMI_BMC) += kcs_bmc_npcm7xx.o
|
||||
obj-$(CONFIG_PHYTIUM_KCS_IPMI_BMC) += kcs_bmc_phytium.o
|
||||
obj-$(CONFIG_PHYTIUM_BT_IPMI_BMC) += bt_bmc_phytium.o
|
||||
obj-$(CONFIG_IPMB_DEVICE_INTERFACE) += ipmb_dev_int.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,533 @@
|
|||
// SPDX-License-Identifier: GPL-2.0+
|
||||
/*
|
||||
* Copyright (c) 2021-2023, Phytium Technology, Co., Ltd.
|
||||
*
|
||||
* Derived from drivers/char/ipmi/bt-bmc.c
|
||||
* Copyright (c) 2015-2016, IBM Corporation.
|
||||
*/
|
||||
|
||||
#include <linux/atomic.h>
|
||||
#include <linux/bt-bmc.h>
|
||||
#include <linux/errno.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/mfd/syscon.h>
|
||||
#include <linux/miscdevice.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/poll.h>
|
||||
#include <linux/regmap.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/timer.h>
|
||||
|
||||
/*
|
||||
* This is a BMC device used to communicate to the host
|
||||
*/
|
||||
#define DEVICE_NAME "ipmi-bt-host"
|
||||
|
||||
#define BT_IO_BASE 0xe4
|
||||
#define BT_IRQ 10
|
||||
|
||||
#define LPC_HICR0 0x00
|
||||
#define LPC_HICR0_LPC3E BIT(7)
|
||||
#define LPC_HICR0_LPC2E BIT(6)
|
||||
#define LPC_HICR0_LPC1E BIT(5)
|
||||
#define LPC_HICR0_SDWNE BIT(3) /* 0:disabl,1:enable for HICR1_SDWNB */
|
||||
#define LPC_HICR0_PMEE BIT(2) /* 0:disabl,1:enable for HICR1_PMEB */
|
||||
|
||||
#define LPC_HICR2 0x08
|
||||
#define LPC_HICR2_IBFIF3 BIT(3) /* 0:normal,1:enable irq 3*/
|
||||
|
||||
#define LPC_HICR4 0x10
|
||||
#define LPC_HICR4_LADR12AS BIT(7)
|
||||
#define LPC_HICR4_KCSENBL BIT(2)
|
||||
#define LPC_BTENABLE BIT(0) /* share bt channel enable,0:disable,1:enable */
|
||||
#define LPC_LADR3H_BT 0x014
|
||||
#define LPC_LADR3L_BT 0x018
|
||||
|
||||
#define BT_CR1 0x4C
|
||||
#define BT_CR1_IRQ_H2B 0x04
|
||||
#define BT_CR1_IRQ_HWRST 0x40
|
||||
|
||||
#define BT_CSR1 0x54
|
||||
#define BT_CSR1_IRQ_H2B 0x04
|
||||
#define BT_CSR1_IRQ_HWRST 0x40
|
||||
|
||||
#define BT_CTRL 0x58
|
||||
#define BT_CTRL_B_BUSY 0x80
|
||||
#define BT_CTRL_H_BUSY 0x40
|
||||
#define BT_CTRL_OEM0 0x20
|
||||
#define BT_CTRL_SMS_ATN 0x10
|
||||
#define BT_CTRL_B2H_ATN 0x08
|
||||
#define BT_CTRL_H2B_ATN 0x04
|
||||
#define BT_CTRL_CLR_RD_PTR 0x02
|
||||
#define BT_CTRL_CLR_WR_PTR 0x01
|
||||
#define BT_BMC2HOST 0x5C
|
||||
#define BT_HOST2BMC 0x98
|
||||
#define BT_INTMASK 0x60
|
||||
#define BT_INTMASK_B2H_IRQEN 0x01
|
||||
#define BT_INTMASK_B2H_IRQ 0x02
|
||||
#define BT_INTMASK_BMC_HWRST 0x80
|
||||
|
||||
#define BT_BMC_BUFFER_SIZE 256
|
||||
|
||||
struct bt_bmc {
|
||||
struct device dev;
|
||||
struct miscdevice miscdev;
|
||||
struct regmap *map;
|
||||
int irq;
|
||||
wait_queue_head_t queue;
|
||||
struct timer_list poll_timer;
|
||||
struct mutex mutex;
|
||||
};
|
||||
|
||||
static atomic_t open_count = ATOMIC_INIT(0);
|
||||
|
||||
static const struct regmap_config bt_regmap_cfg = {
|
||||
.reg_bits = 32,
|
||||
.val_bits = 32,
|
||||
.reg_stride = 4,
|
||||
};
|
||||
|
||||
static u8 bt_inb(struct bt_bmc *bt_bmc, int reg)
|
||||
{
|
||||
uint32_t val = 0;
|
||||
int rc;
|
||||
|
||||
rc = regmap_read(bt_bmc->map, reg, &val);
|
||||
WARN(rc != 0, "regmap_read() failed: %d\n", rc);
|
||||
|
||||
return rc == 0 ? (u8) val : 0;
|
||||
}
|
||||
|
||||
static void bt_outb(struct bt_bmc *bt_bmc, u8 data, int reg)
|
||||
{
|
||||
int rc;
|
||||
|
||||
rc = regmap_write(bt_bmc->map, reg, data);
|
||||
WARN(rc != 0, "regmap_write() failed: %d\n", rc);
|
||||
}
|
||||
|
||||
static void clr_rd_ptr(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
bt_outb(bt_bmc, BT_CTRL_CLR_RD_PTR, BT_CTRL);
|
||||
}
|
||||
|
||||
static void clr_wr_ptr(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
bt_outb(bt_bmc, BT_CTRL_CLR_WR_PTR, BT_CTRL);
|
||||
}
|
||||
|
||||
static void clr_h2b_atn(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
bt_outb(bt_bmc, 0, BT_CTRL);
|
||||
}
|
||||
|
||||
static void set_b_busy(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
if (!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY))
|
||||
bt_outb(bt_bmc, BT_CTRL_B_BUSY, BT_CTRL);
|
||||
}
|
||||
|
||||
static void clr_b_busy(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
if (bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_B_BUSY)
|
||||
bt_outb(bt_bmc, 0, BT_CTRL);
|
||||
}
|
||||
|
||||
static void set_b2h_atn(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
bt_outb(bt_bmc, BT_CTRL_B2H_ATN, BT_CTRL);
|
||||
}
|
||||
|
||||
static u8 bt_read(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
return bt_inb(bt_bmc, BT_HOST2BMC);
|
||||
}
|
||||
|
||||
static ssize_t bt_readn(struct bt_bmc *bt_bmc, u8 *buf, size_t n)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < n; i++)
|
||||
buf[i] = bt_read(bt_bmc);
|
||||
return n;
|
||||
}
|
||||
|
||||
static void bt_write(struct bt_bmc *bt_bmc, u8 c)
|
||||
{
|
||||
bt_outb(bt_bmc, c, BT_BMC2HOST);
|
||||
}
|
||||
|
||||
static ssize_t bt_writen(struct bt_bmc *bt_bmc, u8 *buf, size_t n)
|
||||
{
|
||||
int i;
|
||||
|
||||
for (i = 0; i < n; i++)
|
||||
bt_write(bt_bmc, buf[i]);
|
||||
return n;
|
||||
}
|
||||
|
||||
static void set_sms_atn(struct bt_bmc *bt_bmc)
|
||||
{
|
||||
bt_outb(bt_bmc, BT_CTRL_SMS_ATN, BT_CTRL);
|
||||
}
|
||||
|
||||
static struct bt_bmc *file_bt_bmc(struct file *file)
|
||||
{
|
||||
return container_of(file->private_data, struct bt_bmc, miscdev);
|
||||
}
|
||||
|
||||
static int bt_bmc_open(struct inode *inode, struct file *file)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = file_bt_bmc(file);
|
||||
|
||||
if (atomic_inc_return(&open_count) == 1) {
|
||||
clr_b_busy(bt_bmc);
|
||||
return 0;
|
||||
}
|
||||
|
||||
atomic_dec(&open_count);
|
||||
|
||||
return -EBUSY;
|
||||
}
|
||||
|
||||
/*
|
||||
* The BT (Block Transfer) interface means that entire messages are
|
||||
* buffered by the host before a notification is sent to the BMC that
|
||||
* there is data to be read. The first byte is the length and the
|
||||
* message data follows. The read operation just tries to capture the
|
||||
* whole before returning it to userspace.
|
||||
*
|
||||
* BT Message format :
|
||||
*
|
||||
* Byte 1 Byte 2 Byte 3 Byte 4 Byte 5:N
|
||||
* Length NetFn/LUN Seq Cmd Data
|
||||
*
|
||||
*/
|
||||
static ssize_t bt_bmc_read(struct file *file, char __user *buf,
|
||||
size_t count, loff_t *ppos)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = file_bt_bmc(file);
|
||||
u8 len;
|
||||
int len_byte = 1;
|
||||
u8 kbuffer[BT_BMC_BUFFER_SIZE];
|
||||
ssize_t ret = 0;
|
||||
ssize_t nread;
|
||||
|
||||
WARN_ON(*ppos);
|
||||
|
||||
if (wait_event_interruptible(bt_bmc->queue,
|
||||
bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))
|
||||
return -ERESTARTSYS;
|
||||
|
||||
mutex_lock(&bt_bmc->mutex);
|
||||
|
||||
if (unlikely(!(bt_inb(bt_bmc, BT_CTRL) & BT_CTRL_H2B_ATN))) {
|
||||
ret = -EIO;
|
||||
goto out_unlock;
|
||||
}
|
||||
|
||||
set_b_busy(bt_bmc);
|
||||
clr_h2b_atn(bt_bmc);
|
||||
clr_rd_ptr(bt_bmc);
|
||||
|
||||
/*
|
||||
* The BT frames start with the message length, which does not
|
||||
* include the length byte.
|
||||
*/
|
||||
kbuffer[0] = bt_read(bt_bmc);
|
||||
len = kbuffer[0];
|
||||
|
||||
/* We pass the length back to userspace as well */
|
||||
if (len + 1 > count)
|
||||
len = count - 1;
|
||||
|
||||
while (len) {
|
||||
nread = min_t(ssize_t, len, sizeof(kbuffer) - len_byte);
|
||||
|
||||
bt_readn(bt_bmc, kbuffer + len_byte, nread);
|
||||
|
||||
if (copy_to_user(buf, kbuffer, nread + len_byte)) {
|
||||
ret = -EFAULT;
|
||||
break;
|
||||
}
|
||||
len -= nread;
|
||||
buf += nread + len_byte;
|
||||
ret += nread + len_byte;
|
||||
len_byte = 0;
|
||||
}
|
||||
|
||||
clr_b_busy(bt_bmc);
|
||||
|
||||
out_unlock:
|
||||
mutex_unlock(&bt_bmc->mutex);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* BT Message response format :
|
||||
*
|
||||
* Byte 1 Byte 2 Byte 3 Byte 4 Byte 5 Byte 6:N
|
||||
* Length NetFn/LUN Seq Cmd Code Data
|
||||
*/
|
||||
static ssize_t bt_bmc_write(struct file *file, const char __user *buf,
|
||||
size_t count, loff_t *ppos)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = file_bt_bmc(file);
|
||||
u8 kbuffer[BT_BMC_BUFFER_SIZE];
|
||||
ssize_t ret = 0;
|
||||
ssize_t nwritten;
|
||||
|
||||
/*
|
||||
* send a minimum response size
|
||||
*/
|
||||
if (count < 5)
|
||||
return -EINVAL;
|
||||
|
||||
WARN_ON(*ppos);
|
||||
|
||||
/*
|
||||
* There's no interrupt for clearing bmc busy so we have to
|
||||
* poll
|
||||
*/
|
||||
if (wait_event_interruptible(bt_bmc->queue,
|
||||
!(bt_inb(bt_bmc, BT_CTRL) &
|
||||
(BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))))
|
||||
return -ERESTARTSYS;
|
||||
|
||||
mutex_lock(&bt_bmc->mutex);
|
||||
|
||||
if (unlikely(bt_inb(bt_bmc, BT_CTRL) &
|
||||
(BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN))) {
|
||||
ret = -EIO;
|
||||
goto out_unlock;
|
||||
}
|
||||
|
||||
clr_wr_ptr(bt_bmc);
|
||||
|
||||
while (count) {
|
||||
nwritten = min_t(ssize_t, count, sizeof(kbuffer));
|
||||
if (copy_from_user(&kbuffer, buf, nwritten)) {
|
||||
ret = -EFAULT;
|
||||
break;
|
||||
}
|
||||
|
||||
bt_writen(bt_bmc, kbuffer, nwritten);
|
||||
|
||||
count -= nwritten;
|
||||
buf += nwritten;
|
||||
ret += nwritten;
|
||||
}
|
||||
|
||||
set_b2h_atn(bt_bmc);
|
||||
|
||||
out_unlock:
|
||||
mutex_unlock(&bt_bmc->mutex);
|
||||
return ret;
|
||||
}
|
||||
|
||||
static long bt_bmc_ioctl(struct file *file, unsigned int cmd,
|
||||
unsigned long param)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = file_bt_bmc(file);
|
||||
|
||||
switch (cmd) {
|
||||
case BT_BMC_IOCTL_SMS_ATN:
|
||||
set_sms_atn(bt_bmc);
|
||||
return 0;
|
||||
}
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int bt_bmc_release(struct inode *inode, struct file *file)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = file_bt_bmc(file);
|
||||
|
||||
atomic_dec(&open_count);
|
||||
set_b_busy(bt_bmc);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static __poll_t bt_bmc_poll(struct file *file, poll_table *wait)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = file_bt_bmc(file);
|
||||
__poll_t mask = 0;
|
||||
u8 ctrl;
|
||||
|
||||
poll_wait(file, &bt_bmc->queue, wait);
|
||||
|
||||
ctrl = bt_inb(bt_bmc, BT_CTRL);
|
||||
|
||||
if (ctrl & BT_CTRL_H2B_ATN)
|
||||
mask |= EPOLLIN;
|
||||
|
||||
if (!(ctrl & (BT_CTRL_H_BUSY | BT_CTRL_B2H_ATN)))
|
||||
mask |= EPOLLOUT;
|
||||
|
||||
return mask;
|
||||
}
|
||||
|
||||
static const struct file_operations bt_bmc_fops = {
|
||||
.owner = THIS_MODULE,
|
||||
.open = bt_bmc_open,
|
||||
.read = bt_bmc_read,
|
||||
.write = bt_bmc_write,
|
||||
.release = bt_bmc_release,
|
||||
.poll = bt_bmc_poll,
|
||||
.unlocked_ioctl = bt_bmc_ioctl,
|
||||
};
|
||||
|
||||
static void poll_timer(struct timer_list *t)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = from_timer(bt_bmc, t, poll_timer);
|
||||
|
||||
bt_bmc->poll_timer.expires += msecs_to_jiffies(500);
|
||||
wake_up(&bt_bmc->queue);
|
||||
add_timer(&bt_bmc->poll_timer);
|
||||
}
|
||||
|
||||
static irqreturn_t bt_bmc_irq(int irq, void *arg)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = arg;
|
||||
u32 reg, intmsk;
|
||||
int rc;
|
||||
|
||||
rc = regmap_read(bt_bmc->map, BT_CR1, ®);
|
||||
if (rc)
|
||||
return IRQ_NONE;
|
||||
|
||||
reg &= BT_CR1_IRQ_H2B | BT_CR1_IRQ_HWRST;
|
||||
if (!reg)
|
||||
return IRQ_NONE;
|
||||
|
||||
/* ack pending IRQs */
|
||||
regmap_write(bt_bmc->map, BT_CR1, 0);
|
||||
|
||||
if (reg & BT_CR1_IRQ_HWRST) {
|
||||
regmap_read(bt_bmc->map, BT_INTMASK, &intmsk);
|
||||
if (intmsk & BT_INTMASK_BMC_HWRST)
|
||||
regmap_write(bt_bmc->map, BT_INTMASK, 0);
|
||||
}
|
||||
|
||||
wake_up(&bt_bmc->queue);
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int bt_bmc_config_irq(struct bt_bmc *bt_bmc,
|
||||
struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
int rc;
|
||||
|
||||
bt_bmc->irq = platform_get_irq(pdev, 0);
|
||||
if (!bt_bmc->irq)
|
||||
return -ENODEV;
|
||||
|
||||
rc = devm_request_irq(dev, bt_bmc->irq, bt_bmc_irq, IRQF_SHARED,
|
||||
DEVICE_NAME, bt_bmc);
|
||||
if (rc < 0) {
|
||||
dev_warn(dev, "Unable to request IRQ %d\n", bt_bmc->irq);
|
||||
bt_bmc->irq = 0;
|
||||
return rc;
|
||||
}
|
||||
|
||||
/*
|
||||
* Configure IRQs on the bmc clearing the H2B and HBUSY bits;
|
||||
* H2B will be asserted when the bmc has data for us; HBUSY
|
||||
* will be cleared (along with B2H) when we can write the next
|
||||
* message to the BT buffer
|
||||
*/
|
||||
rc = regmap_update_bits(bt_bmc->map, BT_CSR1,
|
||||
BT_CSR1_IRQ_H2B | BT_CSR1_IRQ_HWRST,
|
||||
BT_CSR1_IRQ_H2B | BT_CSR1_IRQ_HWRST);
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
static int bt_bmc_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct bt_bmc *bt_bmc;
|
||||
struct device *dev;
|
||||
int rc;
|
||||
|
||||
if (!pdev || !pdev->dev.of_node)
|
||||
return -ENODEV;
|
||||
|
||||
dev = &pdev->dev;
|
||||
dev_info(dev, "Found bt bmc device\n");
|
||||
|
||||
bt_bmc = devm_kzalloc(dev, sizeof(*bt_bmc), GFP_KERNEL);
|
||||
if (!bt_bmc)
|
||||
return -ENOMEM;
|
||||
|
||||
dev_set_drvdata(&pdev->dev, bt_bmc);
|
||||
|
||||
bt_bmc->map = syscon_node_to_regmap(pdev->dev.parent->of_node);
|
||||
|
||||
mutex_init(&bt_bmc->mutex);
|
||||
init_waitqueue_head(&bt_bmc->queue);
|
||||
|
||||
bt_bmc->miscdev.minor = MISC_DYNAMIC_MINOR,
|
||||
bt_bmc->miscdev.name = DEVICE_NAME,
|
||||
bt_bmc->miscdev.fops = &bt_bmc_fops,
|
||||
bt_bmc->miscdev.parent = dev;
|
||||
rc = misc_register(&bt_bmc->miscdev);
|
||||
if (rc) {
|
||||
dev_err(dev, "Unable to register misc device\n");
|
||||
return rc;
|
||||
}
|
||||
|
||||
bt_bmc_config_irq(bt_bmc, pdev);
|
||||
|
||||
if (bt_bmc->irq) {
|
||||
dev_info(dev, "Using IRQ %d\n", bt_bmc->irq);
|
||||
} else {
|
||||
dev_info(dev, "No IRQ; using timer\n");
|
||||
timer_setup(&bt_bmc->poll_timer, poll_timer, 0);
|
||||
bt_bmc->poll_timer.expires = jiffies + msecs_to_jiffies(10);
|
||||
add_timer(&bt_bmc->poll_timer);
|
||||
}
|
||||
|
||||
regmap_update_bits(bt_bmc->map, LPC_HICR0, LPC_HICR0_LPC3E, LPC_HICR0_LPC3E);
|
||||
regmap_update_bits(bt_bmc->map, LPC_HICR4, LPC_BTENABLE, LPC_BTENABLE);
|
||||
regmap_write(bt_bmc->map, LPC_LADR3H_BT, BT_IO_BASE >> 8);
|
||||
regmap_write(bt_bmc->map, LPC_LADR3L_BT, BT_IO_BASE);
|
||||
regmap_update_bits(bt_bmc->map, LPC_HICR2, LPC_HICR2_IBFIF3, LPC_HICR2_IBFIF3);
|
||||
clr_b_busy(bt_bmc);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int bt_bmc_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct bt_bmc *bt_bmc = dev_get_drvdata(&pdev->dev);
|
||||
|
||||
misc_deregister(&bt_bmc->miscdev);
|
||||
if (!bt_bmc->irq)
|
||||
del_timer_sync(&bt_bmc->poll_timer);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id bt_bmc_match[] = {
|
||||
{ .compatible = "phytium,bt-bmc" },
|
||||
{ },
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, bt_bmc_match);
|
||||
|
||||
static struct platform_driver bt_bmc_driver = {
|
||||
.driver = {
|
||||
.name = DEVICE_NAME,
|
||||
.of_match_table = bt_bmc_match,
|
||||
},
|
||||
.probe = bt_bmc_probe,
|
||||
.remove = bt_bmc_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(bt_bmc_driver);
|
||||
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_AUTHOR("Cheng Quan <chengquan@phytium.com.cn");
|
||||
MODULE_DESCRIPTION("Linux device interface to the BT interface");
|
||||
Loading…
Reference in New Issue