diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index cc776fcea73a..677154184697 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -161,6 +161,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
 	imx25-pdk.dtb \
 	imx27-apf27.dtb \
 	imx27-apf27dev.dtb \
+	imx27-eukrea-mbimxsd27-baseboard.dtb \
 	imx27-pdk.dtb \
 	imx27-phytec-phycore-rdk.dtb \
 	imx27-phytec-phycard-s-rdk.dtb \
diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
new file mode 100644
index 000000000000..e2242638ea0b
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi
@@ -0,0 +1,296 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Eukrea CPUIMX27";
+	compatible = "eukrea,cpuimx27", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x04000000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		clk14745600: clock@0 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <14745600>;
+			reg = <0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire>;
+	status = "okay";
+};
+
+&sdhci2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc2>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	fsl,uart-has-rtscts;
+	status = "okay";
+};
+
+&usbh2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbh2>;
+	dr_mode = "host";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	dr_mode = "otg";
+	phy_type = "ulpi";
+	disable-over-current;
+	status = "okay";
+};
+
+&weim {
+	status = "okay";
+
+	nor: nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0 0x00000000 0x04000000>;
+		bank-width = <2>;
+		linux,mtd-name = "physmap-flash.0";
+		fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>;
+	};
+
+	uart8250@3,200000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_1>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x200000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,400000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_2>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x400000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,800000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_3>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x800000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+
+	uart8250@3,1000000 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_uart8250_4>;
+		compatible = "ns8250";
+		clocks = <&clk14745600>;
+		fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>;
+		interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>;
+		reg = <3 0x1000000 0x1000>;
+		reg-shift = <1>;
+		reg-io-width = <1>;
+		no-loopback-test;
+	};
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27 {
+		pinctrl_fec: fecgrp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0		0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1		0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2		0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3		0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER		0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1		0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2		0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3		0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO		0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC		0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS		0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK		0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0		0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV		0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK		0x0
+				MX27_PAD_ATA_DATA13__FEC_COL		0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER		0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN		0x0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX27_PAD_I2C_DATA__I2C_DATA		0x0
+				MX27_PAD_I2C_CLK__I2C_CLK		0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB			0x0
+				MX27_PAD_NFCLE__NFCLE			0x0
+				MX27_PAD_NFWP_B__NFWP_B			0x0
+				MX27_PAD_NFCE_B__NFCE_B			0x0
+				MX27_PAD_NFALE__NFALE			0x0
+				MX27_PAD_NFRE_B__NFRE_B			0x0
+				MX27_PAD_NFWE_B__NFWE_B			0x0
+			>;
+		};
+
+		pinctrl_owire: owiregrp {
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE			0x0
+			>;
+		};
+
+		pinctrl_sdhc2: sdhc2grp {
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK		0x0
+				MX27_PAD_SD2_CMD__SD2_CMD		0x0
+				MX27_PAD_SD2_D0__SD2_D0			0x0
+				MX27_PAD_SD2_D1__SD2_D1			0x0
+				MX27_PAD_SD2_D2__SD2_D2			0x0
+				MX27_PAD_SD2_D3__SD2_D3			0x0
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_TXDM__UART4_TXD		0x0
+				MX27_PAD_USBH1_RXDP__UART4_RXD		0x0
+				MX27_PAD_USBH1_TXDP__UART4_CTS		0x0
+				MX27_PAD_USBH1_FS__UART4_RTS		0x0
+			>;
+		};
+
+		pinctrl_uart8250_1: uart82501grp {
+			fsl,pins = <
+				MX27_PAD_USB_PWR__GPIO2_23		0x0
+			>;
+		};
+
+		pinctrl_uart8250_2: uart82502grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_SUSP__GPIO2_22		0x0
+			>;
+		};
+
+		pinctrl_uart8250_3: uart82503grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_OE_B__GPIO2_27		0x0
+			>;
+		};
+
+		pinctrl_uart8250_4: uart82504grp {
+			fsl,pins = <
+				MX27_PAD_USBH1_RXDM__GPIO2_30		0x0
+			>;
+		};
+
+		pinctrl_usbh2: usbh2grp {
+			fsl,pins = <
+				MX27_PAD_USBH2_CLK__USBH2_CLK		0x0
+				MX27_PAD_USBH2_DIR__USBH2_DIR		0x0
+				MX27_PAD_USBH2_NXT__USBH2_NXT		0x0
+				MX27_PAD_USBH2_STP__USBH2_STP		0x0
+				MX27_PAD_CSPI2_SCLK__USBH2_DATA0	0x0
+				MX27_PAD_CSPI2_MOSI__USBH2_DATA1	0x0
+				MX27_PAD_CSPI2_MISO__USBH2_DATA2	0x0
+				MX27_PAD_CSPI2_SS1__USBH2_DATA3		0x0
+				MX27_PAD_CSPI2_SS2__USBH2_DATA4		0x0
+				MX27_PAD_CSPI1_SS2__USBH2_DATA5		0x0
+				MX27_PAD_CSPI2_SS0__USBH2_DATA6		0x0
+				MX27_PAD_USBH2_DATA7__USBH2_DATA7	0x0
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX27_PAD_USBOTG_CLK__USBOTG_CLK		0x0
+				MX27_PAD_USBOTG_DIR__USBOTG_DIR		0x0
+				MX27_PAD_USBOTG_NXT__USBOTG_NXT		0x0
+				MX27_PAD_USBOTG_STP__USBOTG_STP		0x0
+				MX27_PAD_USBOTG_DATA0__USBOTG_DATA0	0x0
+				MX27_PAD_USBOTG_DATA1__USBOTG_DATA1	0x0
+				MX27_PAD_USBOTG_DATA2__USBOTG_DATA2	0x0
+				MX27_PAD_USBOTG_DATA3__USBOTG_DATA3	0x0
+				MX27_PAD_USBOTG_DATA4__USBOTG_DATA4	0x0
+				MX27_PAD_USBOTG_DATA5__USBOTG_DATA5	0x0
+				MX27_PAD_USBOTG_DATA6__USBOTG_DATA6	0x0
+				MX27_PAD_USBOTG_DATA7__USBOTG_DATA7	0x0
+			>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
new file mode 100644
index 000000000000..bb64ca1667f4
--- /dev/null
+++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts
@@ -0,0 +1,274 @@
+/*
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-eukrea-cpuimx27.dtsi"
+
+/ {
+	model = "Eukrea MBIMXSD27";
+	compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27";
+
+	display0: CMO-QVGA {
+		model = "CMO-QVGA";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfad08b80>;
+
+		display-timings {
+			timing0: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <20>;
+				hsync-len = <30>;
+				hfront-porch = <38>;
+				vback-porch = <4>;
+				vsync-len = <3>;
+				vfront-porch = <15>;
+			};
+		};
+	};
+
+	backlight {
+		compatible = "gpio-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpioleds>;
+
+		led1 {
+			label = "system::live";
+			gpios = <&gpio6 16 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led2 {
+			label = "system::user";
+			gpios = <&gpio6 19 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	regulators {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "simple-bus";
+
+		reg_lcd: regulator@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_lcdreg>;
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "LCD";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&cspi1 {
+	pinctrl-0 = <&pinctrl_cspi1>;
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	ads7846 {
+		compatible = "ti,ads7846";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		reg = <0>;
+		interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
+		spi-cpol;
+		spi-max-frequency = <1500000>;
+		ti,keep-vref-on;
+	};
+};
+
+&fb {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_imxfb>;
+	display = <&display0>;
+	lcd-supply = <&reg_lcd>;
+	fsl,dmacr = <0x00040060>;
+	fsl,lscr1 = <0x00120300>;
+	fsl,lpccr = <0x00a903ff>;
+	status = "okay";
+};
+
+&i2c1 {
+	codec: codec@1a {
+		compatible = "ti,tlv320aic23";
+		reg = <0x1a>;
+	};
+};
+
+&kpp {
+	linux,keymap = <
+		MATRIX_KEY(0, 0, KEY_UP)
+		MATRIX_KEY(0, 1, KEY_DOWN)
+		MATRIX_KEY(1, 0, KEY_RIGHT)
+		MATRIX_KEY(1, 1, KEY_LEFT)
+	>;
+	status = "okay";
+};
+
+&sdhci1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdhc1>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ssi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ssi1>;
+	fsl,mode = "i2s-slave";
+	codec-handle = <&codec>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-eukrea-cpuimx27-baseboard {
+		pinctrl_cspi1: cspi1grp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_MISO__CSPI1_MISO	0x0
+				MX27_PAD_CSPI1_MOSI__CSPI1_MOSI	0x0
+				MX27_PAD_CSPI1_SCLK__CSPI1_SCLK	0x0
+				MX27_PAD_CSPI1_SS0__GPIO4_28	0x0 /* CS0 */
+			>;
+		};
+
+		pinctrl_backlight: backlightgrp {
+			fsl,pins = <
+				MX27_PAD_PWMO__GPIO5_5		0x0
+			>;
+		};
+
+		pinctrl_gpioleds: gpioledsgrp {
+			fsl,pins = <
+				MX27_PAD_PC_PWRON__GPIO6_16	0x0
+				MX27_PAD_PC_CD2_B__GPIO6_19	0x0
+			>;
+		};
+
+		pinctrl_imxfb: imxfbgrp {
+			fsl,pins = <
+				MX27_PAD_LD0__LD0		0x0
+				MX27_PAD_LD1__LD1		0x0
+				MX27_PAD_LD2__LD2		0x0
+				MX27_PAD_LD3__LD3		0x0
+				MX27_PAD_LD4__LD4		0x0
+				MX27_PAD_LD5__LD5		0x0
+				MX27_PAD_LD6__LD6		0x0
+				MX27_PAD_LD7__LD7		0x0
+				MX27_PAD_LD8__LD8		0x0
+				MX27_PAD_LD9__LD9		0x0
+				MX27_PAD_LD10__LD10		0x0
+				MX27_PAD_LD11__LD11		0x0
+				MX27_PAD_LD12__LD12		0x0
+				MX27_PAD_LD13__LD13		0x0
+				MX27_PAD_LD14__LD14		0x0
+				MX27_PAD_LD15__LD15		0x0
+				MX27_PAD_LD16__LD16		0x0
+				MX27_PAD_LD17__LD17		0x0
+				MX27_PAD_CONTRAST__CONTRAST	0x0
+				MX27_PAD_OE_ACD__OE_ACD		0x0
+				MX27_PAD_HSYNC__HSYNC		0x0
+				MX27_PAD_VSYNC__VSYNC		0x0
+			>;
+		};
+
+		pinctrl_lcdreg: lcdreggrp {
+			fsl,pins = <
+				MX27_PAD_CLS__GPIO1_25		0x0
+			>;
+		};
+
+		pinctrl_sdhc1: sdhc1grp {
+			fsl,pins = <
+				MX27_PAD_SD1_CLK__SD1_CLK	0x0
+				MX27_PAD_SD1_CMD__SD1_CMD	0x0
+				MX27_PAD_SD1_D0__SD1_D0		0x0
+				MX27_PAD_SD1_D1__SD1_D1		0x0
+				MX27_PAD_SD1_D2__SD1_D2		0x0
+				MX27_PAD_SD1_D3__SD1_D3		0x0
+			>;
+		};
+
+		pinctrl_ssi1: ssi1grp {
+			fsl,pins = <
+				MX27_PAD_SSI4_CLK__SSI4_CLK	0x0
+				MX27_PAD_SSI4_FS__SSI4_FS	0x0
+				MX27_PAD_SSI4_RXDAT__SSI4_RXDAT	0x1
+				MX27_PAD_SSI4_TXDAT__SSI4_TXDAT	0x1
+			>;
+		};
+
+		pinctrl_touch: touchgrp {
+			fsl,pins = <
+				MX27_PAD_CSPI1_RDY__GPIO4_25	0x0 /* IRQ */
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_PAD_UART1_TXD__UART1_TXD	0x0
+				MX27_PAD_UART1_RXD__UART1_RXD	0x0
+				MX27_PAD_UART1_CTS__UART1_CTS	0x0
+				MX27_PAD_UART1_RTS__UART1_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_PAD_UART2_TXD__UART2_TXD	0x0
+				MX27_PAD_UART2_RXD__UART2_RXD	0x0
+				MX27_PAD_UART2_CTS__UART2_CTS	0x0
+				MX27_PAD_UART2_RTS__UART2_RTS	0x0
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_PAD_UART3_TXD__UART3_TXD	0x0
+				MX27_PAD_UART3_RXD__UART3_RXD	0x0
+				MX27_PAD_UART3_CTS__UART3_CTS	0x0
+				MX27_PAD_UART3_RTS__UART3_RTS	0x0
+			>;
+		};
+	};
+};