diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index a5ad553da8cd..42bbd99a36ac 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1315,7 +1315,6 @@ static int _regulator_do_enable(struct regulator_dev *rdev);
 /**
  * set_machine_constraints - sets regulator constraints
  * @rdev: regulator source
- * @constraints: constraints to apply
  *
  * Allows platform initialisation code to define and constrain
  * regulator circuits e.g. valid voltage/current ranges, etc.  NOTE:
@@ -1323,21 +1322,11 @@ static int _regulator_do_enable(struct regulator_dev *rdev);
  * regulator operations to proceed i.e. set_voltage, set_current_limit,
  * set_mode.
  */
-static int set_machine_constraints(struct regulator_dev *rdev,
-	const struct regulation_constraints *constraints)
+static int set_machine_constraints(struct regulator_dev *rdev)
 {
 	int ret = 0;
 	const struct regulator_ops *ops = rdev->desc->ops;
 
-	if (constraints)
-		rdev->constraints = kmemdup(constraints, sizeof(*constraints),
-					    GFP_KERNEL);
-	else
-		rdev->constraints = kzalloc(sizeof(*constraints),
-					    GFP_KERNEL);
-	if (!rdev->constraints)
-		return -ENOMEM;
-
 	ret = machine_constraints_voltage(rdev, rdev->constraints);
 	if (ret != 0)
 		return ret;
@@ -1852,6 +1841,15 @@ static int regulator_resolve_supply(struct regulator_dev *rdev)
 		}
 	}
 
+	if (r == rdev) {
+		dev_err(dev, "Supply for %s (%s) resolved to itself\n",
+			rdev->desc->name, rdev->supply_name);
+		if (!have_full_constraints())
+			return -EINVAL;
+		r = dummy_regulator_rdev;
+		get_device(&r->dev);
+	}
+
 	/*
 	 * If the supply's parent device is not the same as the
 	 * regulator's parent device, then ensure the parent device
@@ -5146,7 +5144,6 @@ struct regulator_dev *
 regulator_register(const struct regulator_desc *regulator_desc,
 		   const struct regulator_config *cfg)
 {
-	const struct regulation_constraints *constraints = NULL;
 	const struct regulator_init_data *init_data;
 	struct regulator_config *config = NULL;
 	static atomic_t regulator_no = ATOMIC_INIT(-1);
@@ -5285,14 +5282,23 @@ regulator_register(const struct regulator_desc *regulator_desc,
 
 	/* set regulator constraints */
 	if (init_data)
-		constraints = &init_data->constraints;
+		rdev->constraints = kmemdup(&init_data->constraints,
+					    sizeof(*rdev->constraints),
+					    GFP_KERNEL);
+	else
+		rdev->constraints = kzalloc(sizeof(*rdev->constraints),
+					    GFP_KERNEL);
+	if (!rdev->constraints) {
+		ret = -ENOMEM;
+		goto wash;
+	}
 
 	if (init_data && init_data->supply_regulator)
 		rdev->supply_name = init_data->supply_regulator;
 	else if (regulator_desc->supply_name)
 		rdev->supply_name = regulator_desc->supply_name;
 
-	ret = set_machine_constraints(rdev, constraints);
+	ret = set_machine_constraints(rdev);
 	if (ret == -EPROBE_DEFER) {
 		/* Regulator might be in bypass mode and so needs its supply
 		 * to set the constraints */
@@ -5301,7 +5307,7 @@ regulator_register(const struct regulator_desc *regulator_desc,
 		 * that is just being created */
 		ret = regulator_resolve_supply(rdev);
 		if (!ret)
-			ret = set_machine_constraints(rdev, constraints);
+			ret = set_machine_constraints(rdev);
 		else
 			rdev_dbg(rdev, "unable to resolve supply early: %pe\n",
 				 ERR_PTR(ret));
@@ -5843,13 +5849,14 @@ static int regulator_late_cleanup(struct device *dev, void *data)
 	if (rdev->use_count)
 		goto unlock;
 
-	/* If we can't read the status assume it's on. */
+	/* If we can't read the status assume it's always on. */
 	if (ops->is_enabled)
 		enabled = ops->is_enabled(rdev);
 	else
 		enabled = 1;
 
-	if (!enabled)
+	/* But if reading the status failed, assume that it's off. */
+	if (enabled <= 0)
 		goto unlock;
 
 	if (have_full_constraints()) {
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 7e8ba9246167..01a12cfcea7c 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -836,11 +836,14 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		 * the switched regulator till yet.
 		 */
 		if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) {
-			if (pfuze_chip->regulator_descs[i].sw_reg) {
-				desc->ops = &pfuze100_sw_disable_regulator_ops;
-				desc->enable_val = 0x8;
-				desc->disable_val = 0x0;
-				desc->enable_time = 500;
+			if (pfuze_chip->chip_id == PFUZE100 ||
+				pfuze_chip->chip_id == PFUZE200) {
+				if (pfuze_chip->regulator_descs[i].sw_reg) {
+					desc->ops = &pfuze100_sw_disable_regulator_ops;
+					desc->enable_val = 0x8;
+					desc->disable_val = 0x0;
+					desc->enable_time = 500;
+				}
 			}
 		}
 
diff --git a/drivers/regulator/ti-abb-regulator.c b/drivers/regulator/ti-abb-regulator.c
index 3e60bff76194..9f0a4d50cead 100644
--- a/drivers/regulator/ti-abb-regulator.c
+++ b/drivers/regulator/ti-abb-regulator.c
@@ -342,8 +342,17 @@ static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
 		return ret;
 	}
 
-	/* If data is exactly the same, then just update index, no change */
 	info = &abb->info[sel];
+	/*
+	 * When Linux kernel is starting up, we are'nt sure of the
+	 * Bias configuration that bootloader has configured.
+	 * So, we get to know the actual setting the first time
+	 * we are asked to transition.
+	 */
+	if (abb->current_info_idx == -EINVAL)
+		goto just_set_abb;
+
+	/* If data is exactly the same, then just update index, no change */
 	oinfo = &abb->info[abb->current_info_idx];
 	if (!memcmp(info, oinfo, sizeof(*info))) {
 		dev_dbg(dev, "%s: Same data new idx=%d, old idx=%d\n", __func__,
@@ -351,6 +360,7 @@ static int ti_abb_set_voltage_sel(struct regulator_dev *rdev, unsigned sel)
 		goto out;
 	}
 
+just_set_abb:
 	ret = ti_abb_set_opp(rdev, abb, info);
 
 out: