arm64: dts: qcom: starqltechn: add initial device tree for starqltechn
New device support - Samsung S9 (SM-G9600) phone What works: - simple framebuffer - storage (both main and sdcard) - ramoops Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com> Signed-off-by: Bjorn Andersson <andersson@kernel.org> Link: https://lore.kernel.org/r/20221012185411.1282838-3-dsankouski@gmail.com
This commit is contained in:
Dzmitry Sankouski
Bjorn Andersson
parent
20e88ca296
commit
d711b22eee
|
|
@ -133,6 +133,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb
|
|||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-samsung-starqltechn.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akari.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb
|
||||
dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,460 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* SDM845 Samsung S9 (SM-G9600) (starqltechn / star2qltechn) common device tree source
|
||||
*
|
||||
* Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
|
||||
#include "sdm845.dtsi"
|
||||
|
||||
/ {
|
||||
chassis-type = "handset";
|
||||
model = "Samsung Galaxy S9 SM-G9600";
|
||||
compatible = "samsung,starqltechn", "qcom,sdm845";
|
||||
|
||||
chosen {
|
||||
#address-cells = <2>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
framebuffer: framebuffer@9d400000 {
|
||||
compatible = "simple-framebuffer";
|
||||
reg = <0 0x9d400000 0 (2960 * 1440 * 4)>;//2400000
|
||||
width = <1440>;
|
||||
height = <2960>;
|
||||
stride = <(1440 * 4)>;
|
||||
format = "a8r8g8b8";
|
||||
};
|
||||
};
|
||||
|
||||
vph_pwr: vph-pwr-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vph_pwr";
|
||||
regulator-min-microvolt = <3700000>;
|
||||
regulator-max-microvolt = <3700000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Apparently RPMh does not provide support for PM8998 S4 because it
|
||||
* is always-on; model it as a fixed regulator.
|
||||
*/
|
||||
vreg_s4a_1p8: pm8998-smps4 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vreg_s4a_1p8";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
vin-supply = <&vph_pwr>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
memory@9d400000 {
|
||||
reg = <0x0 0x9d400000 0x0 0x02400000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
memory@a1300000 {
|
||||
compatible = "ramoops";
|
||||
reg = <0x0 0xa1300000 0x0 0x100000>;
|
||||
record-size = <0x40000>;
|
||||
console-size = <0x40000>;
|
||||
ftrace-size = <0x40000>;
|
||||
pmsg-size = <0x40000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&apps_rsc {
|
||||
pm8998-rpmh-regulators {
|
||||
compatible = "qcom,pm8998-rpmh-regulators";
|
||||
qcom,pmic-id = "a";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
vdd-s5-supply = <&vph_pwr>;
|
||||
vdd-s6-supply = <&vph_pwr>;
|
||||
vdd-s7-supply = <&vph_pwr>;
|
||||
vdd-s8-supply = <&vph_pwr>;
|
||||
vdd-s9-supply = <&vph_pwr>;
|
||||
vdd-s10-supply = <&vph_pwr>;
|
||||
vdd-s11-supply = <&vph_pwr>;
|
||||
vdd-s12-supply = <&vph_pwr>;
|
||||
vdd-s13-supply = <&vph_pwr>;
|
||||
vdd-l1-l27-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
|
||||
vdd-l3-l11-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l4-l5-supply = <&vreg_s7a_1p025>;
|
||||
vdd-l6-supply = <&vph_pwr>;
|
||||
vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
|
||||
vdd-l26-supply = <&vreg_s3a_1p35>;
|
||||
vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
|
||||
|
||||
vreg_s2a_1p125: smps2 {
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
};
|
||||
|
||||
vreg_s3a_1p35: smps3 {
|
||||
regulator-min-microvolt = <1352000>;
|
||||
regulator-max-microvolt = <1352000>;
|
||||
};
|
||||
|
||||
vreg_s5a_2p04: smps5 {
|
||||
regulator-min-microvolt = <1904000>;
|
||||
regulator-max-microvolt = <2040000>;
|
||||
};
|
||||
|
||||
vreg_s7a_1p025: smps7 {
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <1028000>;
|
||||
};
|
||||
|
||||
vdd_qusb_hs0:
|
||||
vdda_hp_pcie_core:
|
||||
vdda_mipi_csi0_0p9:
|
||||
vdda_mipi_csi1_0p9:
|
||||
vdda_mipi_csi2_0p9:
|
||||
vdda_mipi_dsi0_pll:
|
||||
vdda_mipi_dsi1_pll:
|
||||
vdda_qlink_lv:
|
||||
vdda_qlink_lv_ck:
|
||||
vdda_qrefs_0p875:
|
||||
vdda_pcie_core:
|
||||
vdda_pll_cc_ebi01:
|
||||
vdda_pll_cc_ebi23:
|
||||
vdda_sp_sensor:
|
||||
vdda_ufs1_core:
|
||||
vdda_ufs2_core:
|
||||
vdda_usb1_ss_core:
|
||||
vdda_usb2_ss_core:
|
||||
vreg_l1a_0p875: ldo1 {
|
||||
regulator-min-microvolt = <880000>;
|
||||
regulator-max-microvolt = <880000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_10:
|
||||
vreg_l2a_1p2: ldo2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vreg_l3a_1p0: ldo3 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1000000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdd_wcss_cx:
|
||||
vdd_wcss_mx:
|
||||
vdda_wcss_pll:
|
||||
vreg_l5a_0p8: ldo5 {
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_13:
|
||||
vreg_l6a_1p8: ldo6 {
|
||||
regulator-min-microvolt = <1856000>;
|
||||
regulator-max-microvolt = <1856000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l7a_1p8: ldo7 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l8a_1p2: ldo8 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1248000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l9a_1p8: ldo9 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l10a_1p8: ldo10 {
|
||||
regulator-min-microvolt = <1704000>;
|
||||
regulator-max-microvolt = <2928000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l11a_1p0: ldo11 {
|
||||
regulator-min-microvolt = <1000000>;
|
||||
regulator-max-microvolt = <1048000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdd_qfprom:
|
||||
vdd_qfprom_sp:
|
||||
vdda_apc1_cs_1p8:
|
||||
vdda_gfx_cs_1p8:
|
||||
vdda_qrefs_1p8:
|
||||
vdda_qusb_hs0_1p8:
|
||||
vddpx_11:
|
||||
vreg_l12a_1p8: ldo12 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vddpx_2:
|
||||
vreg_l13a_2p95: ldo13 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l14a_1p88: ldo14 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l15a_1p8: ldo15 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l16a_2p7: ldo16 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2704000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l17a_1p3: ldo17 {
|
||||
regulator-min-microvolt = <1304000>;
|
||||
regulator-max-microvolt = <1304000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l18a_2p7: ldo18 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l19a_3p0: ldo19 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3104000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l20a_2p95: ldo20 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l21a_2p95: ldo21 {
|
||||
regulator-min-microvolt = <2704000>;
|
||||
regulator-max-microvolt = <2960000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l22a_2p85: ldo22 {
|
||||
regulator-min-microvolt = <2864000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l23a_3p3: ldo23 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_qusb_hs0_3p1:
|
||||
vreg_l24a_3p075: ldo24 {
|
||||
regulator-min-microvolt = <3088000>;
|
||||
regulator-max-microvolt = <3088000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l25a_3p3: ldo25 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3312000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vdda_hp_pcie_1p2:
|
||||
vdda_hv_ebi0:
|
||||
vdda_hv_ebi1:
|
||||
vdda_hv_ebi2:
|
||||
vdda_hv_ebi3:
|
||||
vdda_mipi_csi_1p25:
|
||||
vdda_mipi_dsi0_1p2:
|
||||
vdda_mipi_dsi1_1p2:
|
||||
vdda_pcie_1p2:
|
||||
vdda_ufs1_1p2:
|
||||
vdda_ufs2_1p2:
|
||||
vdda_usb1_ss_1p2:
|
||||
vdda_usb2_ss_1p2:
|
||||
vreg_l26a_1p2: ldo26 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_l28a_3p0: ldo28 {
|
||||
regulator-min-microvolt = <2856000>;
|
||||
regulator-max-microvolt = <3008000>;
|
||||
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
|
||||
};
|
||||
|
||||
vreg_lvs1a_1p8: lvs1 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vreg_lvs2a_1p8: lvs2 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
pm8005-rpmh-regulators {
|
||||
compatible = "qcom,pm8005-rpmh-regulators";
|
||||
qcom,pmic-id = "c";
|
||||
|
||||
vdd-s1-supply = <&vph_pwr>;
|
||||
vdd-s2-supply = <&vph_pwr>;
|
||||
vdd-s3-supply = <&vph_pwr>;
|
||||
vdd-s4-supply = <&vph_pwr>;
|
||||
|
||||
vreg_s3c_0p6: smps3 {
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gcc {
|
||||
protected-clocks = <GCC_QSPI_CORE_CLK>,
|
||||
<GCC_QSPI_CORE_CLK_SRC>,
|
||||
<GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
|
||||
<GCC_LPASS_Q6_AXI_CLK>,
|
||||
<GCC_LPASS_SWAY_CLK>;
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
clock-frequency = <400000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qupv3_id_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_hc {
|
||||
reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
|
||||
vcc-supply = <&vreg_l20a_2p95>;
|
||||
vcc-max-microamp = <600000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ufs_mem_phy {
|
||||
vdda-phy-supply = <&vdda_ufs1_core>;
|
||||
vdda-pll-supply = <&vdda_ufs1_1p2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhc_2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdc2_clk_state &sdc2_cmd_state &sdc2_data_state &sd_card_det_n_state>;
|
||||
cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vreg_l21a_2p95>;
|
||||
vqmmc-supply = <&vddpx_2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_dwc3 {
|
||||
/* Until we have Type C hooked up we'll force this as peripheral. */
|
||||
dr_mode = "peripheral";
|
||||
};
|
||||
|
||||
&usb_1_hsphy {
|
||||
vdd-supply = <&vdda_usb1_ss_core>;
|
||||
vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
|
||||
vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
|
||||
|
||||
qcom,imp-res-offset-value = <8>;
|
||||
qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
|
||||
qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
|
||||
qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1_qmpphy {
|
||||
vdda-phy-supply = <&vdda_usb1_ss_1p2>;
|
||||
vdda-pll-supply = <&vdda_usb1_ss_core>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&wifi {
|
||||
vdd-0.8-cx-mx-supply = <&vreg_l5a_0p8>;
|
||||
vdd-1.8-xo-supply = <&vreg_l7a_1p8>;
|
||||
vdd-1.3-rfa-supply = <&vreg_l17a_1p3>;
|
||||
vdd-3.3-ch0-supply = <&vreg_l25a_3p3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
gpio-reserved-ranges = <0 4>, <27 4>, <81 4>, <85 4>;
|
||||
|
||||
sdc2_clk_state: sdc2-clk-state {
|
||||
pins = "sdc2_clk";
|
||||
bias-disable;
|
||||
|
||||
/*
|
||||
* It seems that mmc_test reports errors if drive
|
||||
* strength is not 16 on clk, cmd, and data pins.
|
||||
*/
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
sdc2_cmd_state: sdc2-cmd-state {
|
||||
pins = "sdc2_cmd";
|
||||
bias-pull-up;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
sdc2_data_state: sdc2-data-state {
|
||||
pins = "sdc2_data";
|
||||
bias-pull-up;
|
||||
drive-strength = <16>;
|
||||
};
|
||||
|
||||
sd_card_det_n_state: sd-card-det-n-state {
|
||||
pins = "gpio126";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
Loading…
Reference in New Issue