net: phy: marvell-88x2222: swap 1G/10G modes on autoneg

Setting 10G without autonegotiation is invalid according to
phy_ethtool_ksettings_set(). Thus, we need to set it during
autonegotiation.

If 1G autonegotiation can't complete for quite a time, but there is
signal in line, switch line interface type to 10GBase-R, if supported,
in hope for link to be established.

And vice versa. If 10GBase-R link can't be established for quite a time,
and autonegotiation is enabled, and there is signal in line, switch line
interface type to appropriate 1G mode, i.e. 1000Base-X or SGMII, if
supported.

Signed-off-by: Ivan Bornyakov <i.bornyakov@metrotek.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/phy/marvell-88x2222.c

@@ -52,6 +52,8 @@
 #define	MV_1GBX_PHY_STAT_SPEED100	BIT(14)
 #define	MV_1GBX_PHY_STAT_SPEED1000	BIT(15)
 
+#define	AUTONEG_TIMEOUT	3
+
 struct mv2222_data {
 	phy_interface_t line_interface;
 	__ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
@@ -173,6 +175,24 @@ static bool mv2222_is_1gbx_capable(struct phy_device *phydev)
 				 priv->supported);
 }
 
+static bool mv2222_is_sgmii_capable(struct phy_device *phydev)
+{
+	struct mv2222_data *priv = phydev->priv;
+
+	return (linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+				  priv->supported) ||
+		linkmode_test_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT,
+				  priv->supported) ||
+		linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+				  priv->supported) ||
+		linkmode_test_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+				  priv->supported) ||
+		linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+				  priv->supported) ||
+		linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+				  priv->supported));
+}
+
 static int mv2222_config_line(struct phy_device *phydev)
 {
 	struct mv2222_data *priv = phydev->priv;
@@ -192,7 +212,8 @@ static int mv2222_config_line(struct phy_device *phydev)
 	}
 }
 
-static int mv2222_setup_forced(struct phy_device *phydev)
+/* Switch between 1G (1000Base-X/SGMII) and 10G (10GBase-R) modes */
+static int mv2222_swap_line_type(struct phy_device *phydev)
 {
 	struct mv2222_data *priv = phydev->priv;
 	bool changed = false;
@@ -200,26 +221,24 @@ static int mv2222_setup_forced(struct phy_device *phydev)
 
 	switch (priv->line_interface) {
 	case PHY_INTERFACE_MODE_10GBASER:
-		if (phydev->speed == SPEED_1000 &&
+		if (mv2222_is_1gbx_capable(phydev)) {
-		    mv2222_is_1gbx_capable(phydev)) {
 			priv->line_interface = PHY_INTERFACE_MODE_1000BASEX;
 			changed = true;
 		}
 
+		if (mv2222_is_sgmii_capable(phydev)) {
+			priv->line_interface = PHY_INTERFACE_MODE_SGMII;
+			changed = true;
+		}
+
 		break;
 	case PHY_INTERFACE_MODE_1000BASEX:
-		if (phydev->speed == SPEED_10000 &&
+	case PHY_INTERFACE_MODE_SGMII:
-		    mv2222_is_10g_capable(phydev)) {
+		if (mv2222_is_10g_capable(phydev)) {
 			priv->line_interface = PHY_INTERFACE_MODE_10GBASER;
 			changed = true;
 		}
 
-		break;
-	case PHY_INTERFACE_MODE_SGMII:
-		ret = mv2222_set_sgmii_speed(phydev);
-		if (ret < 0)
-			return ret;
-
 		break;
 	default:
 		return -EINVAL;
@@ -231,6 +250,29 @@ static int mv2222_setup_forced(struct phy_device *phydev)
 			return ret;
 	}
 
+	return 0;
+}
+
+static int mv2222_setup_forced(struct phy_device *phydev)
+{
+	struct mv2222_data *priv = phydev->priv;
+	int ret;
+
+	if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER) {
+		if (phydev->speed < SPEED_10000 &&
+		    phydev->speed != SPEED_UNKNOWN) {
+			ret = mv2222_swap_line_type(phydev);
+			if (ret < 0)
+				return ret;
+		}
+	}
+
+	if (priv->line_interface == PHY_INTERFACE_MODE_SGMII) {
+		ret = mv2222_set_sgmii_speed(phydev);
+		if (ret < 0)
+			return ret;
+	}
+
 	return mv2222_disable_aneg(phydev);
 }
 
@@ -244,17 +286,9 @@ static int mv2222_config_aneg(struct phy_device *phydev)
 		return 0;
 
 	if (phydev->autoneg == AUTONEG_DISABLE ||
-	    phydev->speed == SPEED_10000)
+	    priv->line_interface == PHY_INTERFACE_MODE_10GBASER)
 		return mv2222_setup_forced(phydev);
 
-	if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER &&
-	    mv2222_is_1gbx_capable(phydev)) {
-		priv->line_interface = PHY_INTERFACE_MODE_1000BASEX;
-		ret = mv2222_config_line(phydev);
-		if (ret < 0)
-			return ret;
-	}
-
 	adv = linkmode_adv_to_mii_adv_x(priv->supported,
 					ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
 
@@ -291,6 +325,7 @@ static int mv2222_aneg_done(struct phy_device *phydev)
 /* Returns negative on error, 0 if link is down, 1 if link is up */
 static int mv2222_read_status_10g(struct phy_device *phydev)
 {
+	static int timeout;
 	int val, link = 0;
 
 	val = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_STAT1);
@@ -304,6 +339,20 @@ static int mv2222_read_status_10g(struct phy_device *phydev)
 		phydev->autoneg = AUTONEG_DISABLE;
 		phydev->speed = SPEED_10000;
 		phydev->duplex = DUPLEX_FULL;
+	} else {
+		if (phydev->autoneg == AUTONEG_ENABLE) {
+			timeout++;
+
+			if (timeout > AUTONEG_TIMEOUT) {
+				timeout = 0;
+
+				val = mv2222_swap_line_type(phydev);
+				if (val < 0)
+					return val;
+
+				return mv2222_config_aneg(phydev);
+			}
+		}
 	}
 
 	return link;
@@ -312,15 +361,31 @@ static int mv2222_read_status_10g(struct phy_device *phydev)
 /* Returns negative on error, 0 if link is down, 1 if link is up */
 static int mv2222_read_status_1g(struct phy_device *phydev)
 {
+	static int timeout;
 	int val, link = 0;
 
 	val = phy_read_mmd(phydev, MDIO_MMD_PCS, MV_1GBX_STAT);
 	if (val < 0)
 		return val;
 
-	if (!(val & BMSR_LSTATUS) ||
+	if (phydev->autoneg == AUTONEG_ENABLE &&
-	    (phydev->autoneg == AUTONEG_ENABLE &&
+	    !(val & BMSR_ANEGCOMPLETE)) {
-	     !(val & BMSR_ANEGCOMPLETE)))
+		timeout++;
+
+		if (timeout > AUTONEG_TIMEOUT) {
+			timeout = 0;
+
+			val = mv2222_swap_line_type(phydev);
+			if (val < 0)
+				return val;
+
+			return mv2222_config_aneg(phydev);
+		}
+
+		return 0;
+	}
+
+	if (!(val & BMSR_LSTATUS))
 		return 0;
 
 	link = 1;
@@ -447,11 +512,7 @@ static int mv2222_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
 		return ret;
 
 	if (mutex_trylock(&phydev->lock)) {
-		if (priv->line_interface == PHY_INTERFACE_MODE_10GBASER)
-			ret = mv2222_setup_forced(phydev);
-		else
 		ret = mv2222_config_aneg(phydev);
-
 		mutex_unlock(&phydev->lock);
 	}