ath10k: Enable the MCS8 and MCS9 at 2.4G band

Enable the MCS8 and MCS9 support for 2.4G band, it will
use these data rate with other devices having the same
capability.

Signed-off-by: Yanbo Li <yanbol@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
This commit is contained in:
Yanbo Li 2015-01-23 08:18:20 +08:00 committed by Kalle Valo
parent 46725b1533
commit d68bb12ab4
2 changed files with 13 additions and 3 deletions

View File

@ -1586,6 +1586,10 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar,
return;
arg->peer_flags |= WMI_PEER_VHT;
if (ar->hw->conf.chandef.chan->band == IEEE80211_BAND_2GHZ)
arg->peer_flags |= WMI_PEER_VHT_2G;
arg->peer_vht_caps = vht_cap->cap;
ampdu_factor = (vht_cap->cap &
@ -1664,7 +1668,12 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar,
switch (ar->hw->conf.chandef.chan->band) {
case IEEE80211_BAND_2GHZ:
if (sta->ht_cap.ht_supported) {
if (sta->vht_cap.vht_supported) {
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
phymode = MODE_11AC_VHT40;
else
phymode = MODE_11AC_VHT20;
} else if (sta->ht_cap.ht_supported) {
if (sta->bandwidth == IEEE80211_STA_RX_BW_40)
phymode = MODE_11NG_HT40;
else
@ -5301,7 +5310,8 @@ int ath10k_mac_register(struct ath10k *ar)
band->bitrates = ath10k_g_rates;
band->ht_cap = ht_cap;
/* vht is not supported in 2.4 GHz */
/* Enable the VHT support at 2.4 GHz */
band->vht_cap = vht_cap;
ar->hw->wiphy->bands[IEEE80211_BAND_2GHZ] = band;
}

View File

@ -4514,7 +4514,7 @@ struct wmi_peer_set_q_empty_callback_cmd {
#define WMI_PEER_SPATIAL_MUX 0x00200000
#define WMI_PEER_VHT 0x02000000
#define WMI_PEER_80MHZ 0x04000000
#define WMI_PEER_PMF 0x08000000
#define WMI_PEER_VHT_2G 0x08000000
/*
* Peer rate capabilities.