From d567206e478f744f90b52f80b85debc3377ea5a0 Mon Sep 17 00:00:00 2001 From: Alexandre Bailon Date: Mon, 30 Jan 2017 18:49:19 +0100 Subject: [PATCH] dt/bindings: da8xx-usb: Add binding for the CPPI 4.1 DMA controller DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx CPPI 4.1 DMA controller. Signed-off-by: Alexandre Bailon Acked-by: Rob Herring Signed-off-by: Vinod Koul --- .../devicetree/bindings/usb/da8xx-usb.txt | 41 ++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt index ccb844aba7d4..717c5f656237 100644 --- a/Documentation/devicetree/bindings/usb/da8xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt @@ -18,10 +18,26 @@ Required properties: - phy-names: Should be "usb-phy" + - dmas: specifies the dma channels + + - dma-names: specifies the names of the channels. Use "rxN" for receive + and "txN" for transmit endpoints. N specifies the endpoint number. + Optional properties: ~~~~~~~~~~~~~~~~~~~~ - vbus-supply: Phandle to a regulator providing the USB bus power. +DMA +~~~ +- compatible: ti,da830-cppi41 +- reg: offset and length of the following register spaces: CPPI DMA Controller, + CPPI DMA Scheduler, Queue Manager +- reg-names: "controller", "scheduler", "queuemgr" +- #dma-cells: should be set to 2. The first number represents the + channel number (0 … 3 for endpoints 1 … 4). + The second number is 0 for RX and 1 for TX transfers. +- #dma-channels: should be set to 4 representing the 4 endpoints. + Example: usb_phy: usb-phy { compatible = "ti,da830-usb-phy"; @@ -30,7 +46,10 @@ Example: }; usb0: usb@200000 { compatible = "ti,da830-musb"; - reg = <0x00200000 0x10000>; + reg = <0x00200000 0x1000>; + ranges; + #address-cells = <1>; + #size-cells = <1>; interrupts = <58>; interrupt-names = "mc"; @@ -39,5 +58,25 @@ Example: phys = <&usb_phy 0>; phy-names = "usb-phy"; + dmas = <&cppi41dma 0 0 &cppi41dma 1 0 + &cppi41dma 2 0 &cppi41dma 3 0 + &cppi41dma 0 1 &cppi41dma 1 1 + &cppi41dma 2 1 &cppi41dma 3 1>; + dma-names = + "rx1", "rx2", "rx3", "rx4", + "tx1", "tx2", "tx3", "tx4"; + status = "okay"; + + cppi41dma: dma-controller@201000 { + compatible = "ti,da830-cppi41"; + reg = <0x201000 0x1000 + 0x202000 0x1000 + 0x204000 0x4000>; + reg-names = "controller", "scheduler", "queuemgr"; + interrupts = <58>; + #dma-cells = <2>; + #dma-channels = <4>; + }; + };