Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Simple overlapping changes to linux/vermagic.h

Signed-off-by: David S. Miller <davem@davemloft.net>

.clang-format

@@ -142,10 +142,13 @@ ForEachMacros:
   - 'for_each_card_auxs'
   - 'for_each_card_auxs_safe'
   - 'for_each_card_components'
+  - 'for_each_card_dapms'
   - 'for_each_card_pre_auxs'
   - 'for_each_card_prelinks'
   - 'for_each_card_rtds'
   - 'for_each_card_rtds_safe'
+  - 'for_each_card_widgets'
+  - 'for_each_card_widgets_safe'
   - 'for_each_cgroup_storage_type'
   - 'for_each_child_of_node'
   - 'for_each_clear_bit'
@@ -160,6 +163,7 @@ ForEachMacros:
   - 'for_each_cpu_and'
   - 'for_each_cpu_not'
   - 'for_each_cpu_wrap'
+  - 'for_each_dapm_widgets'
   - 'for_each_dev_addr'
   - 'for_each_dev_scope'
   - 'for_each_displayid_db'
@@ -170,7 +174,6 @@ ForEachMacros:
   - 'for_each_dpcm_fe'
   - 'for_each_drhd_unit'
   - 'for_each_dss_dev'
-  - 'for_each_efi_handle'
   - 'for_each_efi_memory_desc'
   - 'for_each_efi_memory_desc_in_map'
   - 'for_each_element'
@@ -191,6 +194,7 @@ ForEachMacros:
   - 'for_each_ip_tunnel_rcu'
   - 'for_each_irq_nr'
   - 'for_each_link_codecs'
+  - 'for_each_link_cpus'
   - 'for_each_link_platforms'
   - 'for_each_lru'
   - 'for_each_matching_node'
@@ -250,6 +254,7 @@ ForEachMacros:
   - 'for_each_pci_bridge'
   - 'for_each_pci_dev'
   - 'for_each_pci_msi_entry'
+  - 'for_each_pcm_streams'
   - 'for_each_populated_zone'
   - 'for_each_possible_cpu'
   - 'for_each_present_cpu'
@@ -260,9 +265,12 @@ ForEachMacros:
   - 'for_each_property_of_node'
   - 'for_each_registered_fb'
   - 'for_each_reserved_mem_region'
-  - 'for_each_rtd_codec_dai'
+  - 'for_each_rtd_codec_dais'
-  - 'for_each_rtd_codec_dai_rollback'
+  - 'for_each_rtd_codec_dais_rollback'
   - 'for_each_rtd_components'
+  - 'for_each_rtd_cpu_dais'
+  - 'for_each_rtd_cpu_dais_rollback'
+  - 'for_each_rtd_dais'
   - 'for_each_set_bit'
   - 'for_each_set_bit_from'
   - 'for_each_set_clump8'
@@ -334,6 +342,7 @@ ForEachMacros:
   - 'klp_for_each_object'
   - 'klp_for_each_object_safe'
   - 'klp_for_each_object_static'
+  - 'kunit_suite_for_each_test_case'
   - 'kvm_for_each_memslot'
   - 'kvm_for_each_vcpu'
   - 'list_for_each'
@@ -387,6 +396,7 @@ ForEachMacros:
   - 'of_property_for_each_string'
   - 'of_property_for_each_u32'
   - 'pci_bus_for_each_resource'
+  - 'pcm_for_each_format'
   - 'ping_portaddr_for_each_entry'
   - 'plist_for_each'
   - 'plist_for_each_continue'
@@ -482,7 +492,7 @@ KeepEmptyLinesAtTheStartOfBlocks: false
 MacroBlockBegin: ''
 MacroBlockEnd: ''
 MaxEmptyLinesToKeep: 1
-NamespaceIndentation: Inner
+NamespaceIndentation: None
 #ObjCBinPackProtocolList: Auto # Unknown to clang-format-5.0
 ObjCBlockIndentWidth: 8
 ObjCSpaceAfterProperty: true

Documentation/admin-guide/sysctl/kernel.rst

@@ -390,9 +390,17 @@ When ``kptr_restrict`` is set to 2, kernel pointers printed using
 modprobe
 ========
 
-This gives the full path of the modprobe command which the kernel will
+The full path to the usermode helper for autoloading kernel modules,
-use to load modules. This can be used to debug module loading
+by default "/sbin/modprobe".  This binary is executed when the kernel
-requests::
+requests a module.  For example, if userspace passes an unknown
+filesystem type to mount(), then the kernel will automatically request
+the corresponding filesystem module by executing this usermode helper.
+This usermode helper should insert the needed module into the kernel.
+
+This sysctl only affects module autoloading.  It has no effect on the
+ability to explicitly insert modules.
+
+This sysctl can be used to debug module loading requests::
 
     echo '#! /bin/sh' > /tmp/modprobe
     echo 'echo "$@" >> /tmp/modprobe.log' >> /tmp/modprobe
@@ -400,10 +408,15 @@ requests::
     chmod a+x /tmp/modprobe
     echo /tmp/modprobe > /proc/sys/kernel/modprobe
 
-This only applies when the *kernel* is requesting that the module be
+Alternatively, if this sysctl is set to the empty string, then module
-loaded; it won't have any effect if the module is being loaded
+autoloading is completely disabled.  The kernel will not try to
-explicitly using ``modprobe`` from userspace.
+execute a usermode helper at all, nor will it call the
+kernel_module_request LSM hook.
 
+If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
+then the configured static usermode helper overrides this sysctl,
+except that the empty string is still accepted to completely disable
+module autoloading as described above.
 
 modules_disabled
 ================
@@ -446,28 +459,6 @@ Notes:
      successful IPC object allocation. If an IPC object allocation syscall
      fails, it is undefined if the value remains unmodified or is reset to -1.
 
-modprobe:
-=========
-
-The path to the usermode helper for autoloading kernel modules, by
-default "/sbin/modprobe".  This binary is executed when the kernel
-requests a module.  For example, if userspace passes an unknown
-filesystem type to mount(), then the kernel will automatically request
-the corresponding filesystem module by executing this usermode helper.
-This usermode helper should insert the needed module into the kernel.
-
-This sysctl only affects module autoloading.  It has no effect on the
-ability to explicitly insert modules.
-
-If this sysctl is set to the empty string, then module autoloading is
-completely disabled.  The kernel will not try to execute a usermode
-helper at all, nor will it call the kernel_module_request LSM hook.
-
-If CONFIG_STATIC_USERMODEHELPER=y is set in the kernel configuration,
-then the configured static usermode helper overrides this sysctl,
-except that the empty string is still accepted to completely disable
-module autoloading as described above.
-
 nmi_watchdog
 ============
 

Documentation/arm64/amu.rst

@@ -23,13 +23,14 @@ optional external memory-mapped interface.
 
 Version 1 of the Activity Monitors architecture implements a counter group
 of four fixed and architecturally defined 64-bit event counters.
-  - CPU cycle counter: increments at the frequency of the CPU.
+
-  - Constant counter: increments at the fixed frequency of the system
+- CPU cycle counter: increments at the frequency of the CPU.
-    clock.
+- Constant counter: increments at the fixed frequency of the system
-  - Instructions retired: increments with every architecturally executed
+  clock.
-    instruction.
+- Instructions retired: increments with every architecturally executed
-  - Memory stall cycles: counts instruction dispatch stall cycles caused by
+  instruction.
-    misses in the last level cache within the clock domain.
+- Memory stall cycles: counts instruction dispatch stall cycles caused by
+  misses in the last level cache within the clock domain.
 
 When in WFI or WFE these counters do not increment.
 
@@ -57,11 +58,12 @@ counters, only the presence of the extension.
 
 Firmware (code running at higher exception levels, e.g. arm-tf) support is
 needed to:
- - Enable access for lower exception levels (EL2 and EL1) to the AMU
+
-   registers.
+- Enable access for lower exception levels (EL2 and EL1) to the AMU
- - Enable the counters. If not enabled these will read as 0.
+  registers.
- - Save/restore the counters before/after the CPU is being put/brought up
+- Enable the counters. If not enabled these will read as 0.
-   from the 'off' power state.
+- Save/restore the counters before/after the CPU is being put/brought up
+  from the 'off' power state.
 
 When using kernels that have this feature enabled but boot with broken
 firmware the user may experience panics or lockups when accessing the
@@ -78,10 +80,11 @@ are not trapped in EL2/EL3.
 
 The fixed counters of AMUv1 are accessible though the following system
 register definitions:
- - SYS_AMEVCNTR0_CORE_EL0
+
- - SYS_AMEVCNTR0_CONST_EL0
+- SYS_AMEVCNTR0_CORE_EL0
- - SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_CONST_EL0
- - SYS_AMEVCNTR0_MEM_STALL_EL0
+- SYS_AMEVCNTR0_INST_RET_EL0
+- SYS_AMEVCNTR0_MEM_STALL_EL0
 
 Auxiliary platform specific counters can be accessed using
 SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
@@ -93,9 +96,10 @@ Userspace access
 ----------------
 
 Currently, access from userspace to the AMU registers is disabled due to:
- - Security reasons: they might expose information about code executed in
+
-   secure mode.
+- Security reasons: they might expose information about code executed in
- - Purpose: AMU counters are intended for system management use.
+  secure mode.
+- Purpose: AMU counters are intended for system management use.
 
 Also, the presence of the feature is not visible to userspace.
 
@@ -105,8 +109,9 @@ Virtualization
 
 Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
 guest side is disabled due to:
- - Security reasons: they might expose information about code executed
+
-   by other guests or the host.
+- Security reasons: they might expose information about code executed
+  by other guests or the host.
 
 Any attempt to access the AMU registers will result in an UNDEFINED
 exception being injected into the guest.

Documentation/core-api/timekeeping.rst

@@ -154,9 +154,9 @@ architectures. These are the recommended replacements:
 
 	Use ktime_get() or ktime_get_ts64() instead.
 
-.. c:function:: struct timeval do_gettimeofday( void )
+.. c:function:: void do_gettimeofday( struct timeval * )
-		struct timespec getnstimeofday( void )
+		void getnstimeofday( struct timespec * )
-		struct timespec64 getnstimeofday64( void )
+		void getnstimeofday64( struct timespec64 * )
 		void ktime_get_real_ts( struct timespec * )
 
 	ktime_get_real_ts64() is a direct replacement, but consider using

Documentation/devicetree/bindings/arm/sunxi/allwinner,sun4i-a10-mbus.yaml

@@ -42,6 +42,10 @@ properties:
     description:
       See section 2.3.9 of the DeviceTree Specification.
 
+  '#address-cells': true
+
+  '#size-cells': true
+
 required:
   - "#interconnect-cells"
   - compatible
@@ -59,6 +63,8 @@ examples:
         compatible = "allwinner,sun5i-a13-mbus";
         reg = <0x01c01000 0x1000>;
         clocks = <&ccu CLK_MBUS>;
+        #address-cells = <1>;
+        #size-cells = <1>;
         dma-ranges = <0x00000000 0x40000000 0x20000000>;
         #interconnect-cells = <1>;
     };

Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml

@@ -91,7 +91,7 @@ required:
 
 examples:
   - |
-    vco1: clock@00 {
+    vco1: clock {
       compatible = "arm,impd1-vco1";
       #clock-cells = <0>;
       lock-offset = <0x08>;

Documentation/devicetree/bindings/display/bridge/adi,adv7123.txt

@@ -1,5 +1,5 @@
-Analog Device ADV7123 Video DAC
+Analog Devices ADV7123 Video DAC
--------------------------------
+--------------------------------
 
 The ADV7123 is a digital-to-analog converter that outputs VGA signals from a
 parallel video input.

Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt

@@ -1,5 +1,5 @@
-Analog Device ADV7511(W)/13/33/35 HDMI Encoders
+Analog Devices ADV7511(W)/13/33/35 HDMI Encoders
------------------------------------------
+------------------------------------------------
 
 The ADV7511, ADV7511W, ADV7513, ADV7533 and ADV7535 are HDMI audio and video
 transmitters compatible with HDMI 1.4 and DVI 1.0. They support color space

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.yaml

@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "leadtek,ltk500hd1829";

Documentation/devicetree/bindings/display/panel/lvds.yaml

@@ -96,12 +96,20 @@ properties:
       If set, reverse the bit order described in the data mappings below on all
       data lanes, transmitting bits for slots 6 to 0 instead of 0 to 6.
 
+  port: true
+  ports: true
+
 required:
   - compatible
   - data-mapping
   - width-mm
   - height-mm
   - panel-timing
-  - port
+
+oneOf:
+  - required:
+      - port
+  - required:
+      - ports
 
 ...

Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml

@@ -37,7 +37,6 @@ examples:
     dsi {
         #address-cells = <1>;
         #size-cells = <0>;
-        reg = <0xff450000 0x1000>;
 
         panel@0 {
             compatible = "xinpeng,xpp055c272";

Documentation/devicetree/bindings/dma/adi,axi-dmac.txt

@@ -1,4 +1,4 @@
-Analog Device AXI-DMAC DMA controller
+Analog Devices AXI-DMAC DMA controller
 
 Required properties:
  - compatible: Must be "adi,axi-dmac-1.00.a".

Documentation/devicetree/bindings/hwmon/adi,axi-fan-control.yaml

@@ -2,7 +2,7 @@
 # Copyright 2019 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/hwmon/adi,axi-fan-control.yaml#
+$id: http://devicetree.org/schemas/hwmon/adi,axi-fan-control.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AXI FAN Control Device Tree Bindings
@@ -47,7 +47,7 @@ required:
 
 examples:
   - |
-    fpga_axi: fpga-axi@0 {
+    fpga_axi: fpga-axi {
             #address-cells = <0x2>;
             #size-cells = <0x1>;
 

Documentation/devicetree/bindings/hwmon/adt7475.yaml

@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/adt7475.yaml#
+$id: http://devicetree.org/schemas/hwmon/adt7475.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: ADT7475 hwmon sensor

Documentation/devicetree/bindings/iio/dac/ad5755.txt

@@ -1,4 +1,4 @@
-* Analog Device AD5755 IIO Multi-Channel DAC Linux Driver
+* Analog Devices AD5755 IIO Multi-Channel DAC Linux Driver
 
 Required properties:
  - compatible: Has to contain one of the following:

Documentation/devicetree/bindings/iio/dac/adi,ad5770r.yaml

@@ -2,7 +2,7 @@
 # Copyright 2020 Analog Devices Inc.
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/bindings/iio/dac/adi,ad5770r.yaml#
+$id: http://devicetree.org/schemas/iio/dac/adi,ad5770r.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: Analog Devices AD5770R DAC device driver
@@ -49,93 +49,86 @@ properties:
       asserted during driver probe.
     maxItems: 1
 
-  channel0:
+  channel@0:
     description: Represents an external channel which are
       connected to the DAC. Channel 0 can act both as a current
       source and sink.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
+        const: 0
-          const: 0
 
       adi,range-microamp:
           description: Output range of the channel.
           oneOf:
-            - $ref: /schemas/types.yaml#/definitions/int32-array
             - items:
-                - enum: [0 300000]
+                - const: 0
-                - enum: [-60000 0]
+                - const: 300000
-                - enum: [-60000 300000]
+            - items:
+                - const: -60000
+                - const: 0
+            - items:
+                - const: -60000
+                - const: 300000
 
-  channel1:
+  channel@1:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
+        const: 1
-          const: 1
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
+          items:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
+            - const: 0
-            - items:
+            - enum: [ 140000, 250000 ]
-                - enum: [0 140000]
-                - enum: [0 250000]
 
-  channel2:
+  channel@2:
     description: Represents an external channel which are
       connected to the DAC.
     type: object
 
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
+        const: 2
-          const: 2
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
+          items:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
+            - const: 0
-            - items:
+            - enum: [ 55000, 150000 ]
-                - enum: [0 140000]
-                - enum: [0 250000]
 
 patternProperties:
   "^channel@([3-5])$":
     type: object
     description: Represents the external channels which are connected to the DAC.
     properties:
-      num:
+      reg:
         description: This represents the channel number.
-        items:
+        minimum: 3
-          minimum: 3
+        maximum: 5
-          maximum: 5
 
       adi,range-microamp:
           description: Output range of the channel.
-          oneOf:
+          items:
-            - $ref: /schemas/types.yaml#/definitions/uint32-array
+            - const: 0
-            - items:
+            - enum: [ 45000, 100000 ]
-                - enum: [0 45000]
-                - enum: [0 100000]
 
 required:
 - reg
-- diff-channels
+- channel@0
-- channel0
+- channel@1
-- channel1
+- channel@2
-- channel2
+- channel@3
-- channel3
+- channel@4
-- channel4
+- channel@5
-- channel5
 
 examples:
   - |
@@ -144,40 +137,42 @@ examples:
                 #size-cells = <0>;
 
                 ad5770r@0 {
-                        compatible = "ad5770r";
+                        compatible = "adi,ad5770r";
                         reg = <0>;
                         spi-max-frequency = <1000000>;
                         vref-supply = <&vref>;
                         adi,external-resistor;
                         reset-gpios = <&gpio 22 0>;
+                        #address-cells = <1>;
+                        #size-cells = <0>;
 
                         channel@0 {
-                                num = <0>;
+                                reg = <0>;
-                                adi,range-microamp = <(-60000) 300000>;
+                                adi,range-microamp = <0 300000>;
                         };
 
                         channel@1 {
-                                num = <1>;
+                                reg = <1>;
                                 adi,range-microamp = <0 140000>;
                         };
 
                         channel@2 {
-                                num = <2>;
+                                reg = <2>;
                                 adi,range-microamp = <0 55000>;
                         };
 
                         channel@3 {
-                                num = <3>;
+                                reg = <3>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@4 {
-                                num = <4>;
+                                reg = <4>;
                                 adi,range-microamp = <0 45000>;
                         };
 
                         channel@5 {
-                                num = <5>;
+                                reg = <5>;
                                 adi,range-microamp = <0 45000>;
                         };
                 };

Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml

@@ -109,7 +109,7 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@00000000 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       edt-ft5x06@38 {

Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml

@@ -56,9 +56,8 @@ properties:
       cell with zero.
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32-array
-      - items:
+      - minItems: 4
-          minItems: 4
+        maxItems: 4
-          maxItems: 4
 
 
 required:

Documentation/devicetree/bindings/memory-controllers/nvidia,tegra186-mc.yaml

@@ -97,30 +97,35 @@ examples:
     #include <dt-bindings/clock/tegra186-clock.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    memory-controller@2c00000 {
+    bus {
-        compatible = "nvidia,tegra186-mc";
-        reg = <0x0 0x02c00000 0x0 0xb0000>;
-        interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-
         #address-cells = <2>;
         #size-cells = <2>;
 
-        ranges = <0x0 0x02c00000 0x02c00000 0x0 0xb0000>;
+        memory-controller@2c00000 {
+            compatible = "nvidia,tegra186-mc";
+            reg = <0x0 0x02c00000 0x0 0xb0000>;
+            interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
 
-        /*
+            #address-cells = <2>;
-         * Memory clients have access to all 40 bits that the memory
+            #size-cells = <2>;
-         * controller can address.
-         */
-        dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
 
-        external-memory-controller@2c60000 {
+            ranges = <0x0 0x02c00000 0x0 0x02c00000 0x0 0xb0000>;
-            compatible = "nvidia,tegra186-emc";
-            reg = <0x0 0x02c60000 0x0 0x50000>;
-            interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
-            clocks = <&bpmp TEGRA186_CLK_EMC>;
-            clock-names = "emc";
 
-            nvidia,bpmp = <&bpmp>;
+            /*
+             * Memory clients have access to all 40 bits that the memory
+             * controller can address.
+             */
+            dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x0>;
+
+            external-memory-controller@2c60000 {
+                compatible = "nvidia,tegra186-emc";
+                reg = <0x0 0x02c60000 0x0 0x50000>;
+                interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+                clocks = <&bpmp TEGRA186_CLK_EMC>;
+                clock-names = "emc";
+
+                nvidia,bpmp = <&bpmp>;
+            };
         };
     };
 

Documentation/devicetree/bindings/mfd/rohm,bd71837-pmic.yaml

@@ -123,7 +123,9 @@ examples:
     #include <dt-bindings/leds/common.h>
 
     i2c {
-      pmic: pmic@4b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
             compatible = "rohm,bd71837";
             reg = <0x4b>;
             interrupt-parent = <&gpio1>;

Documentation/devicetree/bindings/mfd/rohm,bd71847-pmic.yaml

@@ -128,7 +128,9 @@ examples:
     #include <dt-bindings/leds/common.h>
 
     i2c {
-      pmic: pmic@4b {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        pmic: pmic@4b {
             compatible = "rohm,bd71847";
             reg = <0x4b>;
             interrupt-parent = <&gpio1>;

Documentation/devicetree/bindings/mfd/st,stpmic1.yaml

@@ -274,7 +274,7 @@ examples:
   - |
     #include <dt-bindings/mfd/st,stpmic1.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-    i2c@0 {
+    i2c {
       #address-cells = <1>;
       #size-cells = <0>;
       pmic@33 {

Documentation/devicetree/bindings/net/qcom,ipq8064-mdio.yaml

@@ -48,6 +48,7 @@ examples:
 
         switch@10 {
             compatible = "qca,qca8337";
+            reg = <0x10>;
             /* ... */
         };
     };

Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt

@@ -30,7 +30,7 @@ Required properties for compatible string qcom,wcn399x-bt:
 
 Optional properties for compatible string qcom,wcn399x-bt:
 
- - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
+ - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
  - firmware-name: specify the name of nvm firmware to load
  - clocks: clock provided to the controller
 

Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml

@@ -146,7 +146,7 @@ patternProperties:
       bindings specified in
       Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt
       Torrent SERDES should follow the bindings specified in
-      Documentation/devicetree/bindings/phy/phy-cadence-dp.txt
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
 
 required:
   - compatible

Documentation/devicetree/bindings/pwm/google,cros-ec-pwm.yaml

@@ -31,10 +31,17 @@ additionalProperties: false
 
 examples:
   - |
-    cros-ec@0 {
+    spi {
-        compatible = "google,cros-ec-spi";
+        #address-cells = <1>;
-        cros_ec_pwm: ec-pwm {
+        #size-cells = <0>;
-            compatible = "google,cros-ec-pwm";
+
-            #pwm-cells = <1>;
+        cros-ec@0 {
+            compatible = "google,cros-ec-spi";
+            reg = <0>;
+
+            cros_ec_pwm: ec-pwm {
+                compatible = "google,cros-ec-pwm";
+                #pwm-cells = <1>;
+            };
         };
     };

Documentation/devicetree/bindings/rng/brcm,bcm2835.yaml

@@ -39,7 +39,7 @@ additionalProperties: false
 
 examples:
   - |
-    rng {
+    rng@7e104000 {
         compatible = "brcm,bcm2835-rng";
         reg = <0x7e104000 0x10>;
         interrupts = <2 29>;

Documentation/devicetree/bindings/sound/rockchip-i2s.yaml

@@ -56,6 +56,9 @@ properties:
       - const: tx
       - const: rx
 
+  power-domains:
+    maxItems: 1
+
   rockchip,capture-channels:
     allOf:
       - $ref: /schemas/types.yaml#/definitions/uint32

Documentation/devicetree/bindings/sound/rockchip-spdif.txt

@@ -1,45 +0,0 @@
-* Rockchip SPDIF transceiver
-
-The S/PDIF audio block is a stereo transceiver that allows the
-processor to receive and transmit digital audio via an coaxial cable or
-a fibre cable.
-
-Required properties:
-
-- compatible: should be one of the following:
-   - "rockchip,rk3066-spdif"
-   - "rockchip,rk3188-spdif"
-   - "rockchip,rk3228-spdif"
-   - "rockchip,rk3288-spdif"
-   - "rockchip,rk3328-spdif"
-   - "rockchip,rk3366-spdif"
-   - "rockchip,rk3368-spdif"
-   - "rockchip,rk3399-spdif"
-- reg: physical base address of the controller and length of memory mapped
-  region.
-- interrupts: should contain the SPDIF interrupt.
-- dmas: DMA specifiers for tx dma. See the DMA client binding,
-  Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: should be "tx"
-- clocks: a list of phandle + clock-specifier pairs, one for each entry
-  in clock-names.
-- clock-names: should contain following:
-   - "hclk": clock for SPDIF controller
-   - "mclk" : clock for SPDIF bus
-
-Required properties on RK3288:
-  - rockchip,grf: the phandle of the syscon node for the general register
-                   file (GRF)
-
-Example for the rk3188 SPDIF controller:
-
-spdif: spdif@1011e000 {
-	compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
-	reg = <0x1011e000 0x2000>;
-	interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-	dmas = <&dmac1_s 8>;
-	dma-names = "tx";
-	clock-names = "hclk", "mclk";
-	clocks = <&cru HCLK_SPDIF>, <&cru SCLK_SPDIF>;
-	#sound-dai-cells = <0>;
-};

Documentation/devicetree/bindings/sound/rockchip-spdif.yaml

@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/rockchip-spdif.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPDIF transceiver
+
+description:
+  The S/PDIF audio block is a stereo transceiver that allows the
+  processor to receive and transmit digital audio via a coaxial or
+  fibre cable.
+
+maintainers:
+  - Heiko Stuebner <heiko@sntech.de>
+
+properties:
+  compatible:
+    oneOf:
+      - const: rockchip,rk3066-spdif
+      - const: rockchip,rk3228-spdif
+      - const: rockchip,rk3328-spdif
+      - const: rockchip,rk3366-spdif
+      - const: rockchip,rk3368-spdif
+      - const: rockchip,rk3399-spdif
+      - items:
+          - enum:
+            - rockchip,rk3188-spdif
+            - rockchip,rk3288-spdif
+          - const: rockchip,rk3066-spdif
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: clock for SPDIF bus
+      - description: clock for SPDIF controller
+
+  clock-names:
+    items:
+      - const: mclk
+      - const: hclk
+
+  dmas:
+    maxItems: 1
+
+  dma-names:
+    const: tx
+
+  power-domains:
+    maxItems: 1
+
+  rockchip,grf:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      The phandle of the syscon node for the GRF register.
+      Required property on RK3288.
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - dmas
+  - dma-names
+  - "#sound-dai-cells"
+
+if:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3288-spdif
+
+then:
+  required:
+    - rockchip,grf
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3188-cru.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    spdif: spdif@1011e000 {
+      compatible = "rockchip,rk3188-spdif", "rockchip,rk3066-spdif";
+      reg = <0x1011e000 0x2000>;
+      interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>;
+      clock-names = "mclk", "hclk";
+      dmas = <&dmac1_s 8>;
+      dma-names = "tx";
+      #sound-dai-cells = <0>;
+    };

Documentation/devicetree/bindings/spi/qcom,spi-qcom-qspi.yaml

@@ -61,7 +61,7 @@ examples:
     #include <dt-bindings/clock/qcom,gcc-sdm845.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    soc: soc@0 {
+    soc: soc {
         #address-cells = <2>;
         #size-cells = <2>;
 

Documentation/devicetree/bindings/usb/ingenic,musb.yaml

@@ -56,7 +56,7 @@ additionalProperties: false
 examples:
   - |
     #include <dt-bindings/clock/jz4740-cgu.h>
-    usb_phy: usb-phy@0 {
+    usb_phy: usb-phy {
       compatible = "usb-nop-xceiv";
       #phy-cells = <0>;
     };

Documentation/devicetree/bindings/usb/qcom,dwc3.txt

@@ -52,8 +52,8 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt   - USB3 QMP PHY
+Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt    - USB3 QMP PHY
-Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt - USB2 QUSB2 PHY
+Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml - USB2 QUSB2 PHY
 
 Example device nodes:
 

Documentation/devicetree/bindings/usb/rockchip,dwc3.txt

@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
 the node is not important. The content of the node is defined in dwc3.txt.
 
 Phy documentation is provided in the following places:
-Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt - USB2.0 PHY
+Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.yaml - USB2.0 PHY
 Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt     - Type-C PHY
 
 Example device nodes:

Documentation/hwmon/isl68137.rst

@@ -16,7 +16,7 @@ Supported chips:
 
   * Renesas ISL68220
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68220'
 
     Addresses scanned: -
 
@@ -26,7 +26,7 @@ Supported chips:
 
   * Renesas ISL68221
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68221'
 
     Addresses scanned: -
 
@@ -36,7 +36,7 @@ Supported chips:
 
   * Renesas ISL68222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68222'
 
     Addresses scanned: -
 
@@ -46,7 +46,7 @@ Supported chips:
 
   * Renesas ISL68223
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68223'
 
     Addresses scanned: -
 
@@ -56,7 +56,7 @@ Supported chips:
 
   * Renesas ISL68224
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68224'
 
     Addresses scanned: -
 
@@ -66,7 +66,7 @@ Supported chips:
 
   * Renesas ISL68225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68225'
 
     Addresses scanned: -
 
@@ -76,7 +76,7 @@ Supported chips:
 
   * Renesas ISL68226
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68226'
 
     Addresses scanned: -
 
@@ -86,7 +86,7 @@ Supported chips:
 
   * Renesas ISL68227
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl68227'
 
     Addresses scanned: -
 
@@ -96,7 +96,7 @@ Supported chips:
 
   * Renesas ISL68229
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68229'
 
     Addresses scanned: -
 
@@ -106,7 +106,7 @@ Supported chips:
 
   * Renesas ISL68233
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl68233'
 
     Addresses scanned: -
 
@@ -116,7 +116,7 @@ Supported chips:
 
   * Renesas ISL68239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl68239'
 
     Addresses scanned: -
 
@@ -126,7 +126,7 @@ Supported chips:
 
   * Renesas ISL69222
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69222'
 
     Addresses scanned: -
 
@@ -136,7 +136,7 @@ Supported chips:
 
   * Renesas ISL69223
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69223'
 
     Addresses scanned: -
 
@@ -146,7 +146,7 @@ Supported chips:
 
   * Renesas ISL69224
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69224'
 
     Addresses scanned: -
 
@@ -156,7 +156,7 @@ Supported chips:
 
   * Renesas ISL69225
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69225'
 
     Addresses scanned: -
 
@@ -166,7 +166,7 @@ Supported chips:
 
   * Renesas ISL69227
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69227'
 
     Addresses scanned: -
 
@@ -176,7 +176,7 @@ Supported chips:
 
   * Renesas ISL69228
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69228'
 
     Addresses scanned: -
 
@@ -186,7 +186,7 @@ Supported chips:
 
   * Renesas ISL69234
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69234'
 
     Addresses scanned: -
 
@@ -196,7 +196,7 @@ Supported chips:
 
   * Renesas ISL69236
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69236'
 
     Addresses scanned: -
 
@@ -206,7 +206,7 @@ Supported chips:
 
   * Renesas ISL69239
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69239'
 
     Addresses scanned: -
 
@@ -216,7 +216,7 @@ Supported chips:
 
   * Renesas ISL69242
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69242'
 
     Addresses scanned: -
 
@@ -226,7 +226,7 @@ Supported chips:
 
   * Renesas ISL69243
 
-    Prefix: 'raa_dmpvr2_1rail'
+    Prefix: 'isl69243'
 
     Addresses scanned: -
 
@@ -236,7 +236,7 @@ Supported chips:
 
   * Renesas ISL69247
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69247'
 
     Addresses scanned: -
 
@@ -246,7 +246,7 @@ Supported chips:
 
   * Renesas ISL69248
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69248'
 
     Addresses scanned: -
 
@@ -256,7 +256,7 @@ Supported chips:
 
   * Renesas ISL69254
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69254'
 
     Addresses scanned: -
 
@@ -266,7 +266,7 @@ Supported chips:
 
   * Renesas ISL69255
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69255'
 
     Addresses scanned: -
 
@@ -276,7 +276,7 @@ Supported chips:
 
   * Renesas ISL69256
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69256'
 
     Addresses scanned: -
 
@@ -286,7 +286,7 @@ Supported chips:
 
   * Renesas ISL69259
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69259'
 
     Addresses scanned: -
 
@@ -296,7 +296,7 @@ Supported chips:
 
   * Renesas ISL69260
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69260'
 
     Addresses scanned: -
 
@@ -306,7 +306,7 @@ Supported chips:
 
   * Renesas ISL69268
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69268'
 
     Addresses scanned: -
 
@@ -316,7 +316,7 @@ Supported chips:
 
   * Renesas ISL69269
 
-    Prefix: 'raa_dmpvr2_3rail'
+    Prefix: 'isl69269'
 
     Addresses scanned: -
 
@@ -326,7 +326,7 @@ Supported chips:
 
   * Renesas ISL69298
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'isl69298'
 
     Addresses scanned: -
 
@@ -336,7 +336,7 @@ Supported chips:
 
   * Renesas RAA228000
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228000'
 
     Addresses scanned: -
 
@@ -346,7 +346,7 @@ Supported chips:
 
   * Renesas RAA228004
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228004'
 
     Addresses scanned: -
 
@@ -356,7 +356,7 @@ Supported chips:
 
   * Renesas RAA228006
 
-    Prefix: 'raa_dmpvr2_hv'
+    Prefix: 'raa228006'
 
     Addresses scanned: -
 
@@ -366,7 +366,7 @@ Supported chips:
 
   * Renesas RAA228228
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa228228'
 
     Addresses scanned: -
 
@@ -376,7 +376,7 @@ Supported chips:
 
   * Renesas RAA229001
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229001'
 
     Addresses scanned: -
 
@@ -386,7 +386,7 @@ Supported chips:
 
   * Renesas RAA229004
 
-    Prefix: 'raa_dmpvr2_2rail'
+    Prefix: 'raa229004'
 
     Addresses scanned: -
 

Documentation/kbuild/makefiles.rst

@@ -1241,7 +1241,8 @@ When kbuild executes, the following steps are followed (roughly):
 	will be displayed with "make KBUILD_VERBOSE=0".
 
 
---- 6.9 Preprocessing linker scripts
+6.9 Preprocessing linker scripts
+--------------------------------
 
 	When the vmlinux image is built, the linker script
 	arch/$(ARCH)/kernel/vmlinux.lds is used.

Documentation/networking/ip-sysctl.txt

@@ -983,6 +983,13 @@ ip_early_demux - BOOLEAN
 	reduces overall throughput, in such case you should disable it.
 	Default: 1
 
+ping_group_range - 2 INTEGERS
+	Restrict ICMP_PROTO datagram sockets to users in the group range.
+	The default is "1 0", meaning, that nobody (not even root) may
+	create ping sockets.  Setting it to "100 100" would grant permissions
+	to the single group. "0 4294967295" would enable it for the world, "100
+	4294967295" would enable it for the users, but not daemons.
+
 tcp_early_demux - BOOLEAN
 	Enable early demux for established TCP sockets.
 	Default: 1

MAINTAINERS

@@ -189,7 +189,7 @@ F:	drivers/net/hamradio/6pack.c
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/driver-api/80211/cfg80211.rst
@@ -505,7 +505,7 @@ F:	drivers/hwmon/adm1029.c
 ADM8211 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 F:	drivers/net/wireless/admtek/adm8211.*
 
 ADP1653 FLASH CONTROLLER DRIVER
@@ -1323,7 +1323,10 @@ ARM INTEGRATOR, VERSATILE AND REALVIEW SUPPORT
 M:	Linus Walleij <linus.walleij@linaro.org>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/arm/arm-boards
+F:	Documentation/devicetree/bindings/arm/arm,integrator.yaml
+F:	Documentation/devicetree/bindings/arm/arm,realview.yaml
+F:	Documentation/devicetree/bindings/arm/arm,versatile.yaml
+F:	Documentation/devicetree/bindings/arm/arm,vexpress-juno.yaml
 F:	Documentation/devicetree/bindings/auxdisplay/arm-charlcd.txt
 F:	Documentation/devicetree/bindings/clock/arm,syscon-icst.yaml
 F:	Documentation/devicetree/bindings/i2c/i2c-versatile.txt
@@ -2847,14 +2850,14 @@ M:	Nick Kossifidis <mickflemm@gmail.com>
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/ath5k
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath5k
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH6KL WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/ath6kl
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath6kl
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath6kl/
 
@@ -3017,7 +3020,7 @@ B43 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
 S:	Odd Fixes
-W:	http://wireless.kernel.org/en/users/Drivers/b43
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43/
 
 B43LEGACY WIRELESS DRIVER
@@ -3025,7 +3028,7 @@ M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 L:	b43-dev@lists.infradead.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/b43
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/b43
 F:	drivers/net/wireless/broadcom/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
@@ -3840,7 +3843,7 @@ CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/carl9170
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/carl9170
 F:	drivers/net/wireless/ath/carl9170/
 
 CAVIUM I2C DRIVER
@@ -5173,6 +5176,7 @@ S:	Maintained
 F:	drivers/soc/fsl/dpio
 
 DPAA2 ETHERNET DRIVER
+M:	Ioana Ciornei <ioana.ciornei@nxp.com>
 M:	Ioana Radulescu <ruxandra.radulescu@nxp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -5552,7 +5556,7 @@ M:	Chen-Yu Tsai <wens@csie.org>
 L:	dri-devel@lists.freedesktop.org
 S:	Supported
 T:	git git://anongit.freedesktop.org/drm/drm-misc
-F:	Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+F:	Documentation/devicetree/bindings/display/allwinner*
 F:	drivers/gpu/drm/sun4i/
 
 DRM DRIVERS FOR AMLOGIC SOCS
@@ -9326,6 +9330,7 @@ M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	Janosch Frank <frankja@linux.ibm.com>
 R:	David Hildenbrand <david@redhat.com>
 R:	Cornelia Huck <cohuck@redhat.com>
+R:	Claudio Imbrenda <imbrenda@linux.ibm.com>
 L:	kvm@vger.kernel.org
 S:	Supported
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -9413,6 +9418,13 @@ F:	include/linux/keyctl.h
 F:	include/uapi/linux/keyctl.h
 F:	security/keys/
 
+KFIFO
+M:	Stefani Seibold <stefani@seibold.net>
+S:	Maintained
+F:	include/linux/kfifo.h
+F:	lib/kfifo.c
+F:	samples/kfifo/
+
 KGDB / KDB /debug_core
 M:	Jason Wessel <jason.wessel@windriver.com>
 M:	Daniel Thompson <daniel.thompson@linaro.org>
@@ -10064,7 +10076,7 @@ MAC80211
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/networking/mac80211-injection.txt
@@ -10694,7 +10706,6 @@ MEDIATEK MT76 WIRELESS LAN DRIVER
 M:	Felix Fietkau <nbd@nbd.name>
 M:	Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
 R:	Ryder Lee <ryder.lee@mediatek.com>
-R:	Roy Luo <royluo@google.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/mediatek/mt76/
@@ -12645,7 +12656,7 @@ F:	fs/orangefs/
 ORINOCO DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/en/users/Drivers/orinoco
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/orinoco
 W:	http://www.nongnu.org/orinoco/
 F:	drivers/net/wireless/intersil/orinoco/
 
@@ -12671,7 +12682,7 @@ P54 WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/en/users/Drivers/p54
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/p54/
 
 PACKING
@@ -13039,7 +13050,7 @@ F:	drivers/pci/controller/pci-xgene-msi.c
 
 PCI NATIVE HOST BRIDGE AND ENDPOINT DRIVERS
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-R:	Andrew Murray <amurray@thegoodpenguin.co.uk>
+R:	Rob Herring <robh@kernel.org>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 Q:	http://patchwork.ozlabs.org/project/linux-pci/list/
@@ -13592,7 +13603,7 @@ PRISM54 WIRELESS DRIVER
 M:	Luis Chamberlain <mcgrof@kernel.org>
 L:	linux-wireless@vger.kernel.org
 S:	Obsolete
-W:	http://wireless.kernel.org/en/users/Drivers/p54
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/p54
 F:	drivers/net/wireless/intersil/prism54/
 
 PROC FILESYSTEM
@@ -13854,7 +13865,8 @@ S:	Maintained
 F:	drivers/scsi/qla1280.[ch]
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-M:	hmadhani@marvell.com
+M:	Nilesh Javali <njavali@marvell.com>
+M:	GR-QLogic-Storage-Upstream@marvell.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	Documentation/scsi/LICENSE.qla2xxx
@@ -13932,7 +13944,7 @@ QUALCOMM ATHEROS ATH10K WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	ath10k@lists.infradead.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/ath10k
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath10k
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.git
 F:	drivers/net/wireless/ath/ath10k/
 
@@ -13947,7 +13959,7 @@ QUALCOMM ATHEROS ATH9K WIRELESS DRIVER
 M:	QCA ath9k Development <ath9k-devel@qca.qualcomm.com>
 L:	linux-wireless@vger.kernel.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/ath9k
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/ath9k
 F:	drivers/net/wireless/ath/ath9k/
 
 QUALCOMM CAMERA SUBSYSTEM DRIVER
@@ -14044,13 +14056,12 @@ QUALCOMM WCN36XX WIRELESS DRIVER
 M:	Kalle Valo <kvalo@codeaurora.org>
 L:	wcn36xx@lists.infradead.org
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/wcn36xx
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wcn36xx
 T:	git git://github.com/KrasnikovEugene/wcn36xx.git
 F:	drivers/net/wireless/ath/wcn36xx/
 
 QUANTENNA QTNFMAC WIRELESS DRIVER
 M:	Igor Mitsyanko <imitsyanko@quantenna.com>
-M:	Avinash Patil <avinashp@quantenna.com>
 M:	Sergey Matyukevich <smatyukevich@quantenna.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
@@ -14272,7 +14283,7 @@ REALTEK WIRELESS DRIVER (rtlwifi family)
 M:	Ping-Ke Shih <pkshih@realtek.com>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtlwifi/
 
@@ -14407,7 +14418,7 @@ RFKILL
 M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git
 F:	Documentation/ABI/stable/sysfs-class-rfkill
@@ -14556,7 +14567,7 @@ F:	drivers/media/dvb-frontends/rtl2832_sdr*
 RTL8180 WIRELESS DRIVER
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtl818x/rtl8180/
 
@@ -14566,7 +14577,7 @@ M:	Hin-Tak Leung <htl10@users.sourceforge.net>
 M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
-W:	http://wireless.kernel.org/
+W:	https://wireless.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 F:	drivers/net/wireless/realtek/rtl818x/rtl8187/
 
@@ -16921,8 +16932,8 @@ F:	drivers/media/platform/ti-vpe/
 TI WILINK WIRELESS DRIVERS
 L:	linux-wireless@vger.kernel.org
 S:	Orphan
-W:	http://wireless.kernel.org/en/users/Drivers/wl12xx
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wl12xx
-W:	http://wireless.kernel.org/en/users/Drivers/wl1251
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wl1251
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx.git
 F:	drivers/net/wireless/ti/
 F:	include/linux/wl12xx.h
@@ -18204,7 +18215,7 @@ M:	Maya Erez <merez@codeaurora.org>
 L:	linux-wireless@vger.kernel.org
 L:	wil6210@qti.qualcomm.com
 S:	Supported
-W:	http://wireless.kernel.org/en/users/Drivers/wil6210
+W:	https://wireless.wiki.kernel.org/en/users/Drivers/wil6210
 F:	drivers/net/wireless/ath/wil6210/
 
 WIMAX STACK

Makefile

@@ -2,7 +2,7 @@
 VERSION = 5
 PATCHLEVEL = 7
 SUBLEVEL = 0
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME = Kleptomaniac Octopus
 
 # *DOCUMENTATION*

arch/arc/include/asm/module.h

@@ -3,7 +3,6 @@
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
  * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
-
  */
 
 #ifndef _ASM_ARC_MODULE_H
@@ -19,8 +18,4 @@ struct mod_arch_specific {
 	const char *secstr;
 };
 
-#define MODULE_PROC_FAMILY "ARC700"
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
 #endif /* _ASM_ARC_MODULE_H */

arch/arc/include/asm/vermagic.h

@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC "ARC700"
+
+#endif /* _ASM_VERMAGIC_H */

arch/arm/boot/dts/bcm2835-rpi.dtsi

@@ -14,6 +14,9 @@
 	soc {
 		firmware: firmware {
 			compatible = "raspberrypi,bcm2835-firmware", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
 			mboxes = <&mailbox>;
 			dma-ranges;
 		};

arch/arm/boot/dts/bcm283x.dtsi

@@ -372,6 +372,7 @@
 					     "dsi0_ddr2",
 					     "dsi0_ddr";
 
+			status = "disabled";
 		};
 
 		aux: aux@7e215000 {

arch/arm/boot/dts/omap3-n950-n9.dtsi

@@ -341,6 +341,11 @@
 	status = "disabled";
 };
 
+/* RNG not directly accessible on N950/N9. */
+&rng_target {
+	status = "disabled";
+};
+
 &usb_otg_hs {
 	interface-type = <0>;
 	usb-phy = <&usb2_phy>;

arch/arm/include/asm/module.h

@@ -37,30 +37,6 @@ struct mod_arch_specific {
 struct module;
 u32 get_module_plt(struct module *mod, unsigned long loc, Elf32_Addr val);
 
-/*
- * Add the ARM architecture version to the version magic string
- */
-#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
-
-/* Add __virt_to_phys patching state as well */
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
-#else
-#define MODULE_ARCH_VERMAGIC_P2V ""
-#endif
-
-/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
-#ifdef CONFIG_THUMB2_KERNEL
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
-#else
-#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
-	MODULE_ARCH_VERMAGIC_ARMVSN \
-	MODULE_ARCH_VERMAGIC_ARMTHUMB \
-	MODULE_ARCH_VERMAGIC_P2V
-
 #ifdef CONFIG_THUMB2_KERNEL
 #define HAVE_ARCH_KALLSYMS_SYMBOL_VALUE
 static inline unsigned long kallsyms_symbol_value(const Elf_Sym *sym)

arch/arm/include/asm/vermagic.h

@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+/*
+ * Add the ARM architecture version to the version magic string
+ */
+#define MODULE_ARCH_VERMAGIC_ARMVSN "ARMv" __stringify(__LINUX_ARM_ARCH__) " "
+
+/* Add __virt_to_phys patching state as well */
+#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
+#define MODULE_ARCH_VERMAGIC_P2V "p2v8 "
+#else
+#define MODULE_ARCH_VERMAGIC_P2V ""
+#endif
+
+/* Add instruction set architecture tag to distinguish ARM/Thumb kernels */
+#ifdef CONFIG_THUMB2_KERNEL
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB "thumb2 "
+#else
+#define MODULE_ARCH_VERMAGIC_ARMTHUMB ""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_ARCH_VERMAGIC_ARMVSN \
+	MODULE_ARCH_VERMAGIC_ARMTHUMB \
+	MODULE_ARCH_VERMAGIC_P2V
+
+#endif /* _ASM_VERMAGIC_H */

arch/arm/mach-imx/Makefile

@@ -91,8 +91,10 @@ AFLAGS_suspend-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += suspend-imx6.o
 obj-$(CONFIG_SOC_IMX53) += suspend-imx53.o
 endif
+ifeq ($(CONFIG_ARM_CPU_SUSPEND),y)
 AFLAGS_resume-imx6.o :=-Wa,-march=armv7-a
 obj-$(CONFIG_SOC_IMX6) += resume-imx6.o
+endif
 obj-$(CONFIG_SOC_IMX6) += pm-imx6.o
 
 obj-$(CONFIG_SOC_IMX1) += mach-imx1.o

arch/arm/xen/enlighten.c

@@ -36,7 +36,7 @@
 
 #include <linux/mm.h>
 
-struct start_info _xen_start_info;
+static struct start_info _xen_start_info;
 struct start_info *xen_start_info = &_xen_start_info;
 EXPORT_SYMBOL(xen_start_info);
 

arch/arm64/include/asm/module.h

@@ -7,8 +7,6 @@
 
 #include <asm-generic/module.h>
 
-#define MODULE_ARCH_VERMAGIC	"aarch64"
-
 #ifdef CONFIG_ARM64_MODULE_PLTS
 struct mod_plt_sec {
 	int			plt_shndx;

arch/arm64/include/asm/pointer_auth.h

@@ -47,7 +47,7 @@ static inline void ptrauth_keys_init_user(struct ptrauth_keys_user *keys)
 		get_random_bytes(&keys->apga, sizeof(keys->apga));
 }
 
-#define __ptrauth_key_install(k, v)				\
+#define __ptrauth_key_install_nosync(k, v)			\
 do {								\
 	struct ptrauth_key __pki_v = (v);			\
 	write_sysreg_s(__pki_v.lo, SYS_ ## k ## KEYLO_EL1);	\
@@ -62,8 +62,11 @@ static __always_inline void ptrauth_keys_init_kernel(struct ptrauth_keys_kernel
 
 static __always_inline void ptrauth_keys_switch_kernel(struct ptrauth_keys_kernel *keys)
 {
-	if (system_supports_address_auth())
+	if (!system_supports_address_auth())
-		__ptrauth_key_install(APIA, keys->apia);
+		return;
+
+	__ptrauth_key_install_nosync(APIA, keys->apia);
+	isb();
 }
 
 extern int ptrauth_prctl_reset_keys(struct task_struct *tsk, unsigned long arg);

arch/arm64/include/asm/sysreg.h

@@ -49,7 +49,9 @@
 #ifndef CONFIG_BROKEN_GAS_INST
 
 #ifdef __ASSEMBLY__
-#define __emit_inst(x)			.inst (x)
+// The space separator is omitted so that __emit_inst(x) can be parsed as
+// either an assembler directive or an assembler macro argument.
+#define __emit_inst(x)			.inst(x)
 #else
 #define __emit_inst(x)			".inst " __stringify((x)) "\n\t"
 #endif

arch/arm64/include/asm/vermagic.h

@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2012 ARM Ltd.
+ */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC	"aarch64"
+
+#endif /* _ASM_VERMAGIC_H */

arch/arm64/kernel/vdso.c

@@ -260,18 +260,7 @@ static int __aarch32_alloc_vdso_pages(void)
 	if (ret)
 		return ret;
 
-	ret = aarch32_alloc_kuser_vdso_page();
+	return aarch32_alloc_kuser_vdso_page();
-	if (ret) {
-		unsigned long c_vvar =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VVAR]);
-		unsigned long c_vdso =
-			(unsigned long)page_to_virt(aarch32_vdso_pages[C_VDSO]);
-
-		free_page(c_vvar);
-		free_page(c_vdso);
-	}
-
-	return ret;
 }
 #else
 static int __aarch32_alloc_vdso_pages(void)

arch/h8300/kernel/.gitignore

@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+vmlinux.lds

arch/hexagon/include/asm/vermagic.h

@@ -3,11 +3,11 @@
  * Copyright (c) 2010-2011, The Linux Foundation. All rights reserved.
  */
 
-#ifndef _ASM_MODULE_H
+#ifndef _ASM_VERMAGIC_H
-#define _ASM_MODULE_H
+#define _ASM_VERMAGIC_H
 
-#include <asm-generic/module.h>
+#include <linux/stringify.h>
 
 #define MODULE_ARCH_VERMAGIC __stringify(PROCESSOR_MODEL_NAME) " "
 
-#endif
+#endif /* _ASM_VERMAGIC_H */

arch/ia64/include/asm/module.h

@@ -26,10 +26,6 @@ struct mod_arch_specific {
 	unsigned int next_got_entry;	/* index of next available got entry */
 };
 
-#define MODULE_PROC_FAMILY	"ia64"
-#define MODULE_ARCH_VERMAGIC	MODULE_PROC_FAMILY \
-	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
-
 #define ARCH_SHF_SMALL	SHF_IA_64_SHORT
 
 #endif /* _ASM_IA64_MODULE_H */

arch/ia64/include/asm/vermagic.h

@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2003 Hewlett-Packard Co
+ *	David Mosberger-Tang <davidm@hpl.hp.com>
+ */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+
+#define MODULE_ARCH_VERMAGIC	"ia64" \
+	"gcc-" __stringify(__GNUC__) "." __stringify(__GNUC_MINOR__)
+
+#endif /* _ASM_VERMAGIC_H */

arch/mips/include/asm/module.h

@@ -83,65 +83,4 @@ search_module_dbetables(unsigned long addr)
 }
 #endif
 
-#ifdef CONFIG_CPU_BMIPS
-#define MODULE_PROC_FAMILY "BMIPS "
-#elif defined CONFIG_CPU_MIPS32_R1
-#define MODULE_PROC_FAMILY "MIPS32_R1 "
-#elif defined CONFIG_CPU_MIPS32_R2
-#define MODULE_PROC_FAMILY "MIPS32_R2 "
-#elif defined CONFIG_CPU_MIPS32_R6
-#define MODULE_PROC_FAMILY "MIPS32_R6 "
-#elif defined CONFIG_CPU_MIPS64_R1
-#define MODULE_PROC_FAMILY "MIPS64_R1 "
-#elif defined CONFIG_CPU_MIPS64_R2
-#define MODULE_PROC_FAMILY "MIPS64_R2 "
-#elif defined CONFIG_CPU_MIPS64_R6
-#define MODULE_PROC_FAMILY "MIPS64_R6 "
-#elif defined CONFIG_CPU_R3000
-#define MODULE_PROC_FAMILY "R3000 "
-#elif defined CONFIG_CPU_TX39XX
-#define MODULE_PROC_FAMILY "TX39XX "
-#elif defined CONFIG_CPU_VR41XX
-#define MODULE_PROC_FAMILY "VR41XX "
-#elif defined CONFIG_CPU_R4X00
-#define MODULE_PROC_FAMILY "R4X00 "
-#elif defined CONFIG_CPU_TX49XX
-#define MODULE_PROC_FAMILY "TX49XX "
-#elif defined CONFIG_CPU_R5000
-#define MODULE_PROC_FAMILY "R5000 "
-#elif defined CONFIG_CPU_R5500
-#define MODULE_PROC_FAMILY "R5500 "
-#elif defined CONFIG_CPU_NEVADA
-#define MODULE_PROC_FAMILY "NEVADA "
-#elif defined CONFIG_CPU_R10000
-#define MODULE_PROC_FAMILY "R10000 "
-#elif defined CONFIG_CPU_RM7000
-#define MODULE_PROC_FAMILY "RM7000 "
-#elif defined CONFIG_CPU_SB1
-#define MODULE_PROC_FAMILY "SB1 "
-#elif defined CONFIG_CPU_LOONGSON32
-#define MODULE_PROC_FAMILY "LOONGSON32 "
-#elif defined CONFIG_CPU_LOONGSON2EF
-#define MODULE_PROC_FAMILY "LOONGSON2EF "
-#elif defined CONFIG_CPU_LOONGSON64
-#define MODULE_PROC_FAMILY "LOONGSON64 "
-#elif defined CONFIG_CPU_CAVIUM_OCTEON
-#define MODULE_PROC_FAMILY "OCTEON "
-#elif defined CONFIG_CPU_XLR
-#define MODULE_PROC_FAMILY "XLR "
-#elif defined CONFIG_CPU_XLP
-#define MODULE_PROC_FAMILY "XLP "
-#else
-#error MODULE_PROC_FAMILY undefined for your processor configuration
-#endif
-
-#ifdef CONFIG_32BIT
-#define MODULE_KERNEL_TYPE "32BIT "
-#elif defined CONFIG_64BIT
-#define MODULE_KERNEL_TYPE "64BIT "
-#endif
-
-#define MODULE_ARCH_VERMAGIC \
-	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
-
 #endif /* _ASM_MODULE_H */

arch/mips/include/asm/vermagic.h

@@ -0,0 +1,66 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_BMIPS
+#define MODULE_PROC_FAMILY "BMIPS "
+#elif defined CONFIG_CPU_MIPS32_R1
+#define MODULE_PROC_FAMILY "MIPS32_R1 "
+#elif defined CONFIG_CPU_MIPS32_R2
+#define MODULE_PROC_FAMILY "MIPS32_R2 "
+#elif defined CONFIG_CPU_MIPS32_R6
+#define MODULE_PROC_FAMILY "MIPS32_R6 "
+#elif defined CONFIG_CPU_MIPS64_R1
+#define MODULE_PROC_FAMILY "MIPS64_R1 "
+#elif defined CONFIG_CPU_MIPS64_R2
+#define MODULE_PROC_FAMILY "MIPS64_R2 "
+#elif defined CONFIG_CPU_MIPS64_R6
+#define MODULE_PROC_FAMILY "MIPS64_R6 "
+#elif defined CONFIG_CPU_R3000
+#define MODULE_PROC_FAMILY "R3000 "
+#elif defined CONFIG_CPU_TX39XX
+#define MODULE_PROC_FAMILY "TX39XX "
+#elif defined CONFIG_CPU_VR41XX
+#define MODULE_PROC_FAMILY "VR41XX "
+#elif defined CONFIG_CPU_R4X00
+#define MODULE_PROC_FAMILY "R4X00 "
+#elif defined CONFIG_CPU_TX49XX
+#define MODULE_PROC_FAMILY "TX49XX "
+#elif defined CONFIG_CPU_R5000
+#define MODULE_PROC_FAMILY "R5000 "
+#elif defined CONFIG_CPU_R5500
+#define MODULE_PROC_FAMILY "R5500 "
+#elif defined CONFIG_CPU_NEVADA
+#define MODULE_PROC_FAMILY "NEVADA "
+#elif defined CONFIG_CPU_R10000
+#define MODULE_PROC_FAMILY "R10000 "
+#elif defined CONFIG_CPU_RM7000
+#define MODULE_PROC_FAMILY "RM7000 "
+#elif defined CONFIG_CPU_SB1
+#define MODULE_PROC_FAMILY "SB1 "
+#elif defined CONFIG_CPU_LOONGSON32
+#define MODULE_PROC_FAMILY "LOONGSON32 "
+#elif defined CONFIG_CPU_LOONGSON2EF
+#define MODULE_PROC_FAMILY "LOONGSON2EF "
+#elif defined CONFIG_CPU_LOONGSON64
+#define MODULE_PROC_FAMILY "LOONGSON64 "
+#elif defined CONFIG_CPU_CAVIUM_OCTEON
+#define MODULE_PROC_FAMILY "OCTEON "
+#elif defined CONFIG_CPU_XLR
+#define MODULE_PROC_FAMILY "XLR "
+#elif defined CONFIG_CPU_XLP
+#define MODULE_PROC_FAMILY "XLP "
+#else
+#error MODULE_PROC_FAMILY undefined for your processor configuration
+#endif
+
+#ifdef CONFIG_32BIT
+#define MODULE_KERNEL_TYPE "32BIT "
+#elif defined CONFIG_64BIT
+#define MODULE_KERNEL_TYPE "64BIT "
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+	MODULE_PROC_FAMILY MODULE_KERNEL_TYPE
+
+#endif /* _ASM_VERMAGIC_H */

arch/nds32/include/asm/vermagic.h

@@ -1,11 +1,9 @@
 /* SPDX-License-Identifier: GPL-2.0 */
 // Copyright (C) 2005-2017 Andes Technology Corporation
 
-#ifndef _ASM_NDS32_MODULE_H
+#ifndef _ASM_VERMAGIC_H
-#define _ASM_NDS32_MODULE_H
+#define _ASM_VERMAGIC_H
-
-#include <asm-generic/module.h>
 
 #define MODULE_ARCH_VERMAGIC	"NDS32v3"
 
-#endif /* _ASM_NDS32_MODULE_H */
+#endif /* _ASM_VERMAGIC_H */

arch/powerpc/include/asm/module.h

@@ -3,28 +3,10 @@
 #define _ASM_POWERPC_MODULE_H
 #ifdef __KERNEL__
 
-/*
- */
-
 #include <linux/list.h>
 #include <asm/bug.h>
 #include <asm-generic/module.h>
 
-
-#ifdef CONFIG_MPROFILE_KERNEL
-#define MODULE_ARCH_VERMAGIC_FTRACE	"mprofile-kernel "
-#else
-#define MODULE_ARCH_VERMAGIC_FTRACE	""
-#endif
-
-#ifdef CONFIG_RELOCATABLE
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE	"relocatable "
-#else
-#define MODULE_ARCH_VERMAGIC_RELOCATABLE	""
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
-
 #ifndef __powerpc64__
 /*
  * Thanks to Paul M for explaining this.

arch/powerpc/include/asm/vermagic.h

@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_MPROFILE_KERNEL
+#define MODULE_ARCH_VERMAGIC_FTRACE	"mprofile-kernel "
+#else
+#define MODULE_ARCH_VERMAGIC_FTRACE	""
+#endif
+
+#ifdef CONFIG_RELOCATABLE
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE	"relocatable "
+#else
+#define MODULE_ARCH_VERMAGIC_RELOCATABLE	""
+#endif
+
+#define MODULE_ARCH_VERMAGIC \
+		MODULE_ARCH_VERMAGIC_FTRACE MODULE_ARCH_VERMAGIC_RELOCATABLE
+
+#endif /* _ASM_VERMAGIC_H */

arch/powerpc/kvm/book3s_64_mmu_hv.c

@@ -604,18 +604,19 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu,
 	 */
 	local_irq_disable();
 	ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+	pte = __pte(0);
+	if (ptep)
+		pte = *ptep;
+	local_irq_enable();
 	/*
 	 * If the PTE disappeared temporarily due to a THP
 	 * collapse, just return and let the guest try again.
 	 */
-	if (!ptep) {
+	if (!pte_present(pte)) {
-		local_irq_enable();
 		if (page)
 			put_page(page);
 		return RESUME_GUEST;
 	}
-	pte = *ptep;
-	local_irq_enable();
 	hpa = pte_pfn(pte) << PAGE_SHIFT;
 	pte_size = PAGE_SIZE;
 	if (shift)

arch/powerpc/kvm/book3s_64_mmu_radix.c

@@ -815,18 +815,19 @@ int kvmppc_book3s_instantiate_page(struct kvm_vcpu *vcpu,
 	 */
 	local_irq_disable();
 	ptep = __find_linux_pte(vcpu->arch.pgdir, hva, NULL, &shift);
+	pte = __pte(0);
+	if (ptep)
+		pte = *ptep;
+	local_irq_enable();
 	/*
 	 * If the PTE disappeared temporarily due to a THP
 	 * collapse, just return and let the guest try again.
 	 */
-	if (!ptep) {
+	if (!pte_present(pte)) {
-		local_irq_enable();
 		if (page)
 			put_page(page);
 		return RESUME_GUEST;
 	}
-	pte = *ptep;
-	local_irq_enable();
 
 	/* If we're logging dirty pages, always map single pages */
 	large_enable = !(memslot->flags & KVM_MEM_LOG_DIRTY_PAGES);

arch/riscv/include/asm/module.h

@@ -6,8 +6,6 @@
 
 #include <asm-generic/module.h>
 
-#define MODULE_ARCH_VERMAGIC    "riscv"
-
 struct module;
 unsigned long module_emit_got_entry(struct module *mod, unsigned long val);
 unsigned long module_emit_plt_entry(struct module *mod, unsigned long val);

arch/riscv/include/asm/vermagic.h

@@ -0,0 +1,9 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2017 Andes Technology Corporation */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#define MODULE_ARCH_VERMAGIC    "riscv"
+
+#endif /* _ASM_VERMAGIC_H */

arch/s390/kvm/interrupt.c

@@ -393,7 +393,7 @@ static unsigned long deliverable_irqs(struct kvm_vcpu *vcpu)
 	if (psw_mchk_disabled(vcpu))
 		active_mask &= ~IRQ_PEND_MCHK_MASK;
 	/* PV guest cpus can have a single interruption injected at a time. */
-	if (kvm_s390_pv_cpu_is_protected(vcpu) &&
+	if (kvm_s390_pv_cpu_get_handle(vcpu) &&
 	    vcpu->arch.sie_block->iictl != IICTL_CODE_NONE)
 		active_mask &= ~(IRQ_PEND_EXT_II_MASK |
 				 IRQ_PEND_IO_MASK |

arch/s390/kvm/kvm-s390.c

@@ -1939,6 +1939,9 @@ static int gfn_to_memslot_approx(struct kvm_memslots *slots, gfn_t gfn)
 			start = slot + 1;
 	}
 
+	if (start >= slots->used_slots)
+		return slots->used_slots - 1;
+
 	if (gfn >= memslots[start].base_gfn &&
 	    gfn < memslots[start].base_gfn + memslots[start].npages) {
 		atomic_set(&slots->lru_slot, start);

arch/sh/include/asm/module.h

@@ -11,32 +11,4 @@ struct mod_arch_specific {
 };
 #endif
 
-#ifdef CONFIG_CPU_LITTLE_ENDIAN
-# ifdef CONFIG_CPU_SH2
-#  define MODULE_PROC_FAMILY "SH2LE "
-# elif defined  CONFIG_CPU_SH3
-#  define MODULE_PROC_FAMILY "SH3LE "
-# elif defined  CONFIG_CPU_SH4
-#  define MODULE_PROC_FAMILY "SH4LE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5LE "
-# else
-#  error unknown processor family
-# endif
-#else
-# ifdef CONFIG_CPU_SH2
-#  define MODULE_PROC_FAMILY "SH2BE "
-# elif defined  CONFIG_CPU_SH3
-#  define MODULE_PROC_FAMILY "SH3BE "
-# elif defined  CONFIG_CPU_SH4
-#  define MODULE_PROC_FAMILY "SH4BE "
-# elif defined  CONFIG_CPU_SH5
-#  define MODULE_PROC_FAMILY "SH5BE "
-# else
-#  error unknown processor family
-# endif
-#endif
-
-#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-
 #endif /* _ASM_SH_MODULE_H */

arch/sh/include/asm/vermagic.h

@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2LE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3LE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4LE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5LE "
+# else
+#  error unknown processor family
+# endif
+#else
+# ifdef CONFIG_CPU_SH2
+#  define MODULE_PROC_FAMILY "SH2BE "
+# elif defined  CONFIG_CPU_SH3
+#  define MODULE_PROC_FAMILY "SH3BE "
+# elif defined  CONFIG_CPU_SH4
+#  define MODULE_PROC_FAMILY "SH4BE "
+# elif defined  CONFIG_CPU_SH5
+#  define MODULE_PROC_FAMILY "SH5BE "
+# else
+#  error unknown processor family
+# endif
+#endif
+
+#define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+
+#endif /* _ASM_VERMAGIC_H */

arch/sh/mm/init.c

@@ -412,7 +412,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 	unsigned long nr_pages = size >> PAGE_SHIFT;
 	int ret;
 
-	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot)
+	if (WARN_ON_ONCE(params->pgprot.pgprot != PAGE_KERNEL.pgprot))
 		return -EINVAL;
 
 	/* We only have ZONE_NORMAL, so this is easy.. */

arch/um/Makefile

@@ -140,6 +140,7 @@ export CFLAGS_vmlinux := $(LINK-y) $(LINK_WRAPS) $(LD_FLAGS_CMDLINE)
 # When cleaning we don't include .config, so we don't include
 # TT or skas makefiles and don't clean skas_ptregs.h.
 CLEAN_FILES += linux x.i gmon.out
+MRPROPER_DIRS += arch/$(SUBARCH)/include/generated
 
 archclean:
 	@find . \( -name '*.bb' -o -name '*.bbg' -o -name '*.da' \

arch/x86/Kconfig

@@ -149,7 +149,7 @@ config X86
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD if X86_64
-	select HAVE_ARCH_USERFAULTFD_WP		if USERFAULTFD
+	select HAVE_ARCH_USERFAULTFD_WP         if X86_64 && USERFAULTFD
 	select HAVE_ARCH_VMAP_STACK		if X86_64
 	select HAVE_ARCH_WITHIN_STACK_FRAMES
 	select HAVE_ASM_MODVERSIONS

arch/x86/events/intel/cstate.c

@@ -643,6 +643,7 @@ static const struct x86_cpu_id intel_cstates_match[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_GOLDMONT_PLUS,	&glm_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	&glm_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	&glm_cstates),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&glm_cstates),
 
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		&icl_cstates),
 	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE,		&icl_cstates),

arch/x86/include/asm/microcode_amd.h

@@ -41,7 +41,7 @@ struct microcode_amd {
 	unsigned int			mpb[0];
 };
 
-#define PATCH_MAX_SIZE PAGE_SIZE
+#define PATCH_MAX_SIZE (3 * PAGE_SIZE)
 
 #ifdef CONFIG_MICROCODE_AMD
 extern void __init load_ucode_amd_bsp(unsigned int family);

arch/x86/include/asm/module.h

@@ -13,64 +13,4 @@ struct mod_arch_specific {
 #endif
 };
 
-#ifdef CONFIG_X86_64
-/* X86_64 does not define MODULE_PROC_FAMILY */
-#elif defined CONFIG_M486SX
-#define MODULE_PROC_FAMILY "486SX "
-#elif defined CONFIG_M486
-#define MODULE_PROC_FAMILY "486 "
-#elif defined CONFIG_M586
-#define MODULE_PROC_FAMILY "586 "
-#elif defined CONFIG_M586TSC
-#define MODULE_PROC_FAMILY "586TSC "
-#elif defined CONFIG_M586MMX
-#define MODULE_PROC_FAMILY "586MMX "
-#elif defined CONFIG_MCORE2
-#define MODULE_PROC_FAMILY "CORE2 "
-#elif defined CONFIG_MATOM
-#define MODULE_PROC_FAMILY "ATOM "
-#elif defined CONFIG_M686
-#define MODULE_PROC_FAMILY "686 "
-#elif defined CONFIG_MPENTIUMII
-#define MODULE_PROC_FAMILY "PENTIUMII "
-#elif defined CONFIG_MPENTIUMIII
-#define MODULE_PROC_FAMILY "PENTIUMIII "
-#elif defined CONFIG_MPENTIUMM
-#define MODULE_PROC_FAMILY "PENTIUMM "
-#elif defined CONFIG_MPENTIUM4
-#define MODULE_PROC_FAMILY "PENTIUM4 "
-#elif defined CONFIG_MK6
-#define MODULE_PROC_FAMILY "K6 "
-#elif defined CONFIG_MK7
-#define MODULE_PROC_FAMILY "K7 "
-#elif defined CONFIG_MK8
-#define MODULE_PROC_FAMILY "K8 "
-#elif defined CONFIG_MELAN
-#define MODULE_PROC_FAMILY "ELAN "
-#elif defined CONFIG_MCRUSOE
-#define MODULE_PROC_FAMILY "CRUSOE "
-#elif defined CONFIG_MEFFICEON
-#define MODULE_PROC_FAMILY "EFFICEON "
-#elif defined CONFIG_MWINCHIPC6
-#define MODULE_PROC_FAMILY "WINCHIPC6 "
-#elif defined CONFIG_MWINCHIP3D
-#define MODULE_PROC_FAMILY "WINCHIP3D "
-#elif defined CONFIG_MCYRIXIII
-#define MODULE_PROC_FAMILY "CYRIXIII "
-#elif defined CONFIG_MVIAC3_2
-#define MODULE_PROC_FAMILY "VIAC3-2 "
-#elif defined CONFIG_MVIAC7
-#define MODULE_PROC_FAMILY "VIAC7 "
-#elif defined CONFIG_MGEODEGX1
-#define MODULE_PROC_FAMILY "GEODEGX1 "
-#elif defined CONFIG_MGEODE_LX
-#define MODULE_PROC_FAMILY "GEODE "
-#else
-#error unknown processor family
-#endif
-
-#ifdef CONFIG_X86_32
-# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
-#endif
-
 #endif /* _ASM_X86_MODULE_H */

arch/x86/include/asm/nospec-branch.h

@@ -237,27 +237,6 @@ enum ssb_mitigation {
 extern char __indirect_thunk_start[];
 extern char __indirect_thunk_end[];
 
-/*
- * On VMEXIT we must ensure that no RSB predictions learned in the guest
- * can be followed in the host, by overwriting the RSB completely. Both
- * retpoline and IBRS mitigations for Spectre v2 need this; only on future
- * CPUs with IBRS_ALL *might* it be avoided.
- */
-static inline void vmexit_fill_RSB(void)
-{
-#ifdef CONFIG_RETPOLINE
-	unsigned long loops;
-
-	asm volatile (ANNOTATE_NOSPEC_ALTERNATIVE
-		      ALTERNATIVE("jmp 910f",
-				  __stringify(__FILL_RETURN_BUFFER(%0, RSB_CLEAR_LOOPS, %1)),
-				  X86_FEATURE_RETPOLINE)
-		      "910:"
-		      : "=r" (loops), ASM_CALL_CONSTRAINT
-		      : : "memory" );
-#endif
-}
-
 static __always_inline
 void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
 {

arch/x86/include/asm/vermagic.h

@@ -0,0 +1,68 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_VERMAGIC_H
+#define _ASM_VERMAGIC_H
+
+#ifdef CONFIG_X86_64
+/* X86_64 does not define MODULE_PROC_FAMILY */
+#elif defined CONFIG_M486SX
+#define MODULE_PROC_FAMILY "486SX "
+#elif defined CONFIG_M486
+#define MODULE_PROC_FAMILY "486 "
+#elif defined CONFIG_M586
+#define MODULE_PROC_FAMILY "586 "
+#elif defined CONFIG_M586TSC
+#define MODULE_PROC_FAMILY "586TSC "
+#elif defined CONFIG_M586MMX
+#define MODULE_PROC_FAMILY "586MMX "
+#elif defined CONFIG_MCORE2
+#define MODULE_PROC_FAMILY "CORE2 "
+#elif defined CONFIG_MATOM
+#define MODULE_PROC_FAMILY "ATOM "
+#elif defined CONFIG_M686
+#define MODULE_PROC_FAMILY "686 "
+#elif defined CONFIG_MPENTIUMII
+#define MODULE_PROC_FAMILY "PENTIUMII "
+#elif defined CONFIG_MPENTIUMIII
+#define MODULE_PROC_FAMILY "PENTIUMIII "
+#elif defined CONFIG_MPENTIUMM
+#define MODULE_PROC_FAMILY "PENTIUMM "
+#elif defined CONFIG_MPENTIUM4
+#define MODULE_PROC_FAMILY "PENTIUM4 "
+#elif defined CONFIG_MK6
+#define MODULE_PROC_FAMILY "K6 "
+#elif defined CONFIG_MK7
+#define MODULE_PROC_FAMILY "K7 "
+#elif defined CONFIG_MK8
+#define MODULE_PROC_FAMILY "K8 "
+#elif defined CONFIG_MELAN
+#define MODULE_PROC_FAMILY "ELAN "
+#elif defined CONFIG_MCRUSOE
+#define MODULE_PROC_FAMILY "CRUSOE "
+#elif defined CONFIG_MEFFICEON
+#define MODULE_PROC_FAMILY "EFFICEON "
+#elif defined CONFIG_MWINCHIPC6
+#define MODULE_PROC_FAMILY "WINCHIPC6 "
+#elif defined CONFIG_MWINCHIP3D
+#define MODULE_PROC_FAMILY "WINCHIP3D "
+#elif defined CONFIG_MCYRIXIII
+#define MODULE_PROC_FAMILY "CYRIXIII "
+#elif defined CONFIG_MVIAC3_2
+#define MODULE_PROC_FAMILY "VIAC3-2 "
+#elif defined CONFIG_MVIAC7
+#define MODULE_PROC_FAMILY "VIAC7 "
+#elif defined CONFIG_MGEODEGX1
+#define MODULE_PROC_FAMILY "GEODEGX1 "
+#elif defined CONFIG_MGEODE_LX
+#define MODULE_PROC_FAMILY "GEODE "
+#else
+#error unknown processor family
+#endif
+
+#ifdef CONFIG_X86_32
+# define MODULE_ARCH_VERMAGIC MODULE_PROC_FAMILY
+#else
+# define MODULE_ARCH_VERMAGIC ""
+#endif
+
+#endif /* _ASM_VERMAGIC_H */

arch/x86/kernel/cpu/intel.c

@@ -1119,35 +1119,53 @@ void switch_to_sld(unsigned long tifn)
 	sld_update_msr(!(tifn & _TIF_SLD));
 }
 
-#define SPLIT_LOCK_CPU(model) {X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY}
-
 /*
- * The following processors have the split lock detection feature. But
+ * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
- * since they don't have the IA32_CORE_CAPABILITIES MSR, the feature cannot
+ * only be trusted if it is confirmed that a CPU model implements a
- * be enumerated. Enable it by family and model matching on these
+ * specific feature at a particular bit position.
- * processors.
+ *
+ * The possible driver data field values:
+ *
+ * - 0: CPU models that are known to have the per-core split-lock detection
+ *	feature even though they do not enumerate IA32_CORE_CAPABILITIES.
+ *
+ * - 1: CPU models which may enumerate IA32_CORE_CAPABILITIES and if so use
+ *      bit 5 to enumerate the per-core split-lock detection feature.
  */
 static const struct x86_cpu_id split_lock_cpu_ids[] __initconst = {
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_X),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_X,		0),
-	SPLIT_LOCK_CPU(INTEL_FAM6_ICELAKE_L),
+	X86_MATCH_INTEL_FAM6_MODEL(ICELAKE_L,		0),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_D,	1),
+	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	1),
 	{}
 };
 
 void __init cpu_set_core_cap_bits(struct cpuinfo_x86 *c)
 {
-	u64 ia32_core_caps = 0;
+	const struct x86_cpu_id *m;
+	u64 ia32_core_caps;
 
-	if (c->x86_vendor != X86_VENDOR_INTEL)
+	if (boot_cpu_has(X86_FEATURE_HYPERVISOR))
 		return;
-	if (cpu_has(c, X86_FEATURE_CORE_CAPABILITIES)) {
+
-		/* Enumerate features reported in IA32_CORE_CAPABILITIES MSR. */
+	m = x86_match_cpu(split_lock_cpu_ids);
+	if (!m)
+		return;
+
+	switch (m->driver_data) {
+	case 0:
+		break;
+	case 1:
+		if (!cpu_has(c, X86_FEATURE_CORE_CAPABILITIES))
+			return;
 		rdmsrl(MSR_IA32_CORE_CAPS, ia32_core_caps);
-	} else if (!boot_cpu_has(X86_FEATURE_HYPERVISOR)) {
+		if (!(ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT))
-		/* Enumerate split lock detection by family and model. */
+			return;
-		if (x86_match_cpu(split_lock_cpu_ids))
+		break;
-			ia32_core_caps |= MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT;
+	default:
+		return;
 	}
 
-	if (ia32_core_caps & MSR_IA32_CORE_CAPS_SPLIT_LOCK_DETECT)
+	split_lock_setup();
-		split_lock_setup();
 }

arch/x86/kernel/cpu/resctrl/core.c

@@ -578,6 +578,8 @@ static void domain_add_cpu(int cpu, struct rdt_resource *r)
 	d->id = id;
 	cpumask_set_cpu(cpu, &d->cpu_mask);
 
+	rdt_domain_reconfigure_cdp(r);
+
 	if (r->alloc_capable && domain_setup_ctrlval(r, d)) {
 		kfree(d);
 		return;

arch/x86/kernel/cpu/resctrl/internal.h

@@ -601,5 +601,6 @@ bool has_busy_rmid(struct rdt_resource *r, struct rdt_domain *d);
 void __check_limbo(struct rdt_domain *d, bool force_free);
 bool cbm_validate_intel(char *buf, u32 *data, struct rdt_resource *r);
 bool cbm_validate_amd(char *buf, u32 *data, struct rdt_resource *r);
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
 
 #endif /* _ASM_X86_RESCTRL_INTERNAL_H */

arch/x86/kernel/cpu/resctrl/rdtgroup.c

@@ -1859,6 +1859,19 @@ static int set_cache_qos_cfg(int level, bool enable)
 	return 0;
 }
 
+/* Restore the qos cfg state when a domain comes online */
+void rdt_domain_reconfigure_cdp(struct rdt_resource *r)
+{
+	if (!r->alloc_capable)
+		return;
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L2DATA])
+		l2_qos_cfg_update(&r->alloc_enabled);
+
+	if (r == &rdt_resources_all[RDT_RESOURCE_L3DATA])
+		l3_qos_cfg_update(&r->alloc_enabled);
+}
+
 /*
  * Enable or disable the MBA software controller
  * which helps user specify bandwidth in MBps.
@@ -3072,7 +3085,8 @@ static int rdtgroup_rmdir(struct kernfs_node *kn)
 	 * If the rdtgroup is a mon group and parent directory
 	 * is a valid "mon_groups" directory, remove the mon group.
 	 */
-	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn) {
+	if (rdtgrp->type == RDTCTRL_GROUP && parent_kn == rdtgroup_default.kn &&
+	    rdtgrp != &rdtgroup_default) {
 		if (rdtgrp->mode == RDT_MODE_PSEUDO_LOCKSETUP ||
 		    rdtgrp->mode == RDT_MODE_PSEUDO_LOCKED) {
 			ret = rdtgroup_ctrl_remove(kn, rdtgrp);

arch/x86/kernel/smpboot.c

@@ -147,7 +147,7 @@ static inline void smpboot_restore_warm_reset_vector(void)
 	*((volatile u32 *)phys_to_virt(TRAMPOLINE_PHYS_LOW)) = 0;
 }
 
-static void init_freq_invariance(void);
+static void init_freq_invariance(bool secondary);
 
 /*
  * Report back to the Boot Processor during boot time or to the caller processor
@@ -185,7 +185,7 @@ static void smp_callin(void)
 	 */
 	set_cpu_sibling_map(raw_smp_processor_id());
 
-	init_freq_invariance();
+	init_freq_invariance(true);
 
 	/*
 	 * Get our bogomips.
@@ -1341,7 +1341,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus)
 	set_sched_topology(x86_topology);
 
 	set_cpu_sibling_map(0);
-	init_freq_invariance();
+	init_freq_invariance(false);
 	smp_sanity_check();
 
 	switch (apic_intr_mode) {
@@ -1877,9 +1877,6 @@ static bool knl_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq,
 	int err, i;
 	u64 msr;
 
-	if (!x86_match_cpu(has_knl_turbo_ratio_limits))
-		return false;
-
 	err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
 	if (err)
 		return false;
@@ -1945,18 +1942,23 @@ static bool skx_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq, int size)
 
 static bool core_set_max_freq_ratio(u64 *base_freq, u64 *turbo_freq)
 {
+	u64 msr;
 	int err;
 
 	err = rdmsrl_safe(MSR_PLATFORM_INFO, base_freq);
 	if (err)
 		return false;
 
-	err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, turbo_freq);
+	err = rdmsrl_safe(MSR_TURBO_RATIO_LIMIT, &msr);
 	if (err)
 		return false;
 
-	*base_freq = (*base_freq >> 8) & 0xFF;      /* max P state */
+	*base_freq = (*base_freq >> 8) & 0xFF;    /* max P state */
-	*turbo_freq = (*turbo_freq >> 24) & 0xFF;   /* 4C turbo    */
+	*turbo_freq = (msr >> 24) & 0xFF;         /* 4C turbo    */
+
+	/* The CPU may have less than 4 cores */
+	if (!*turbo_freq)
+		*turbo_freq = msr & 0xFF;         /* 1C turbo    */
 
 	return true;
 }
@@ -1972,7 +1974,8 @@ static bool intel_set_max_freq_ratio(void)
 	    skx_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
 		goto out;
 
-	if (knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
+	if (x86_match_cpu(has_knl_turbo_ratio_limits) &&
+	    knl_set_max_freq_ratio(&base_freq, &turbo_freq, 1))
 		goto out;
 
 	if (x86_match_cpu(has_skx_turbo_ratio_limits) &&
@@ -1985,13 +1988,22 @@ static bool intel_set_max_freq_ratio(void)
 	return false;
 
 out:
+	/*
+	 * Some hypervisors advertise X86_FEATURE_APERFMPERF
+	 * but then fill all MSR's with zeroes.
+	 */
+	if (!base_freq) {
+		pr_debug("Couldn't determine cpu base frequency, necessary for scale-invariant accounting.\n");
+		return false;
+	}
+
 	arch_turbo_freq_ratio = div_u64(turbo_freq * SCHED_CAPACITY_SCALE,
 					base_freq);
 	arch_set_max_freq_ratio(turbo_disabled());
 	return true;
 }
 
-static void init_counter_refs(void *arg)
+static void init_counter_refs(void)
 {
 	u64 aperf, mperf;
 
@@ -2002,18 +2014,25 @@ static void init_counter_refs(void *arg)
 	this_cpu_write(arch_prev_mperf, mperf);
 }
 
-static void init_freq_invariance(void)
+static void init_freq_invariance(bool secondary)
 {
 	bool ret = false;
 
-	if (smp_processor_id() != 0 || !boot_cpu_has(X86_FEATURE_APERFMPERF))
+	if (!boot_cpu_has(X86_FEATURE_APERFMPERF))
 		return;
 
+	if (secondary) {
+		if (static_branch_likely(&arch_scale_freq_key)) {
+			init_counter_refs();
+		}
+		return;
+	}
+
 	if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
 		ret = intel_set_max_freq_ratio();
 
 	if (ret) {
-		on_each_cpu(init_counter_refs, NULL, 1);
+		init_counter_refs();
 		static_branch_enable(&arch_scale_freq_key);
 	} else {
 		pr_debug("Couldn't determine max cpu frequency, necessary for scale-invariant accounting.\n");

arch/x86/kernel/umip.c

@@ -81,7 +81,7 @@
 #define	UMIP_INST_SLDT  3       /* 0F 00 /0 */
 #define	UMIP_INST_STR   4       /* 0F 00 /1 */
 
-const char * const umip_insns[5] = {
+static const char * const umip_insns[5] = {
 	[UMIP_INST_SGDT] = "SGDT",
 	[UMIP_INST_SIDT] = "SIDT",
 	[UMIP_INST_SMSW] = "SMSW",

arch/x86/kvm/Makefile

@@ -3,6 +3,10 @@
 ccflags-y += -Iarch/x86/kvm
 ccflags-$(CONFIG_KVM_WERROR) += -Werror
 
+ifeq ($(CONFIG_FRAME_POINTER),y)
+OBJECT_FILES_NON_STANDARD_vmenter.o := y
+endif
+
 KVM := ../../../virt/kvm
 
 kvm-y			+= $(KVM)/kvm_main.o $(KVM)/coalesced_mmio.o \

arch/x86/kvm/svm/sev.c

@@ -12,6 +12,7 @@
 #include <linux/kernel.h>
 #include <linux/highmem.h>
 #include <linux/psp-sev.h>
+#include <linux/pagemap.h>
 #include <linux/swap.h>
 
 #include "x86.h"
@@ -1117,7 +1118,7 @@ int __init sev_hardware_setup(void)
 	/* Maximum number of encrypted guests supported simultaneously */
 	max_sev_asid = cpuid_ecx(0x8000001F);
 
-	if (!max_sev_asid)
+	if (!svm_sev_enabled())
 		return 1;
 
 	/* Minimum ASID value that should be used for SEV guest */
@@ -1156,6 +1157,9 @@ err:
 
 void sev_hardware_teardown(void)
 {
+	if (!svm_sev_enabled())
+		return;
+
 	bitmap_free(sev_asid_bitmap);
 	bitmap_free(sev_reclaim_asid_bitmap);
 

arch/x86/kvm/svm/svm.c

@@ -3276,7 +3276,7 @@ static void svm_cancel_injection(struct kvm_vcpu *vcpu)
 	svm_complete_interrupts(svm);
 }
 
-bool __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
+void __svm_vcpu_run(unsigned long vmcb_pa, unsigned long *regs);
 
 static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 {
@@ -3330,13 +3330,8 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 	 */
 	x86_spec_ctrl_set_guest(svm->spec_ctrl, svm->virt_spec_ctrl);
 
-	local_irq_enable();
-
 	__svm_vcpu_run(svm->vmcb_pa, (unsigned long *)&svm->vcpu.arch.regs);
 
-	/* Eliminate branch target predictions from guest mode */
-	vmexit_fill_RSB();
-
 #ifdef CONFIG_X86_64
 	wrmsrl(MSR_GS_BASE, svm->host.gs_base);
 #else
@@ -3366,8 +3361,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 
 	reload_tss(vcpu);
 
-	local_irq_disable();
-
 	x86_spec_ctrl_restore_host(svm->spec_ctrl, svm->virt_spec_ctrl);
 
 	vcpu->arch.cr2 = svm->vmcb->save.cr2;
@@ -3411,7 +3404,6 @@ static void svm_vcpu_run(struct kvm_vcpu *vcpu)
 
 	mark_all_clean(svm->vmcb);
 }
-STACK_FRAME_NON_STANDARD(svm_vcpu_run);
 
 static void svm_load_mmu_pgd(struct kvm_vcpu *vcpu, unsigned long root)
 {

arch/x86/kvm/svm/vmenter.S

@@ -3,6 +3,7 @@
 #include <asm/asm.h>
 #include <asm/bitsperlong.h>
 #include <asm/kvm_vcpu_regs.h>
+#include <asm/nospec-branch.h>
 
 #define WORD_SIZE (BITS_PER_LONG / 8)
 
@@ -35,7 +36,6 @@
  */
 SYM_FUNC_START(__svm_vcpu_run)
 	push %_ASM_BP
-	mov  %_ASM_SP, %_ASM_BP
 #ifdef CONFIG_X86_64
 	push %r15
 	push %r14
@@ -78,6 +78,7 @@ SYM_FUNC_START(__svm_vcpu_run)
 	pop %_ASM_AX
 
 	/* Enter guest mode */
+	sti
 1:	vmload %_ASM_AX
 	jmp 3f
 2:	cmpb $0, kvm_rebooting
@@ -99,6 +100,13 @@ SYM_FUNC_START(__svm_vcpu_run)
 	ud2
 	_ASM_EXTABLE(5b, 6b)
 7:
+	cli
+
+#ifdef CONFIG_RETPOLINE
+	/* IMPORTANT: Stuff the RSB immediately after VM-Exit, before RET! */
+	FILL_RETURN_BUFFER %_ASM_AX, RSB_CLEAR_LOOPS, X86_FEATURE_RETPOLINE
+#endif
+
 	/* "POP" @regs to RAX. */
 	pop %_ASM_AX
 

arch/x86/kvm/vmx/nested.c

@@ -5533,8 +5533,25 @@ static bool nested_vmx_exit_handled_vmcs_access(struct kvm_vcpu *vcpu,
 	return 1 & (b >> (field & 7));
 }
 
+static bool nested_vmx_exit_handled_mtf(struct vmcs12 *vmcs12)
+{
+	u32 entry_intr_info = vmcs12->vm_entry_intr_info_field;
+
+	if (nested_cpu_has_mtf(vmcs12))
+		return true;
+
+	/*
+	 * An MTF VM-exit may be injected into the guest by setting the
+	 * interruption-type to 7 (other event) and the vector field to 0. Such
+	 * is the case regardless of the 'monitor trap flag' VM-execution
+	 * control.
+	 */
+	return entry_intr_info == (INTR_INFO_VALID_MASK
+				   | INTR_TYPE_OTHER_EVENT);
+}
+
 /*
- * Return 1 if we should exit from L2 to L1 to handle an exit, or 0 if we
+ * Return true if we should exit from L2 to L1 to handle an exit, or false if we
  * should handle it ourselves in L0 (and then continue L2). Only call this
  * when in is_guest_mode (L2).
  */
@@ -5633,7 +5650,7 @@ bool nested_vmx_exit_reflected(struct kvm_vcpu *vcpu, u32 exit_reason)
 	case EXIT_REASON_MWAIT_INSTRUCTION:
 		return nested_cpu_has(vmcs12, CPU_BASED_MWAIT_EXITING);
 	case EXIT_REASON_MONITOR_TRAP_FLAG:
-		return nested_cpu_has_mtf(vmcs12);
+		return nested_vmx_exit_handled_mtf(vmcs12);
 	case EXIT_REASON_MONITOR_INSTRUCTION:
 		return nested_cpu_has(vmcs12, CPU_BASED_MONITOR_EXITING);
 	case EXIT_REASON_PAUSE_INSTRUCTION:

arch/x86/kvm/vmx/vmx.c

@@ -4572,7 +4572,7 @@ static int handle_rmode_exception(struct kvm_vcpu *vcpu,
  */
 static void kvm_machine_check(void)
 {
-#if defined(CONFIG_X86_MCE) && defined(CONFIG_X86_64)
+#if defined(CONFIG_X86_MCE)
 	struct pt_regs regs = {
 		.cs = 3, /* Fake ring 3 no matter what the guest ran on */
 		.flags = X86_EFLAGS_IF,

arch/x86/kvm/x86.c

@@ -3060,6 +3060,17 @@ int kvm_get_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 	case MSR_IA32_PERF_CTL:
 	case MSR_AMD64_DC_CFG:
 	case MSR_F15H_EX_CFG:
+	/*
+	 * Intel Sandy Bridge CPUs must support the RAPL (running average power
+	 * limit) MSRs. Just return 0, as we do not want to expose the host
+	 * data here. Do not conditionalize this on CPUID, as KVM does not do
+	 * so for existing CPU-specific MSRs.
+	 */
+	case MSR_RAPL_POWER_UNIT:
+	case MSR_PP0_ENERGY_STATUS:	/* Power plane 0 (core) */
+	case MSR_PP1_ENERGY_STATUS:	/* Power plane 1 (graphics uncore) */
+	case MSR_PKG_ENERGY_STATUS:	/* Total package */
+	case MSR_DRAM_ENERGY_STATUS:	/* DRAM controller */
 		msr_info->data = 0;
 		break;
 	case MSR_F15H_PERF_CTL0 ... MSR_F15H_PERF_CTR5:
@@ -5049,10 +5060,13 @@ set_identity_unlock:
 		r = -EFAULT;
 		if (copy_from_user(&u.ps, argp, sizeof(u.ps)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit_out;
 		r = kvm_vm_ioctl_set_pit(kvm, &u.ps);
+set_pit_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_GET_PIT2: {
@@ -5072,10 +5086,13 @@ set_identity_unlock:
 		r = -EFAULT;
 		if (copy_from_user(&u.ps2, argp, sizeof(u.ps2)))
 			goto out;
+		mutex_lock(&kvm->lock);
 		r = -ENXIO;
 		if (!kvm->arch.vpit)
-			goto out;
+			goto set_pit2_out;
 		r = kvm_vm_ioctl_set_pit2(kvm, &u.ps2);
+set_pit2_out:
+		mutex_unlock(&kvm->lock);
 		break;
 	}
 	case KVM_REINJECT_CONTROL: {

arch/x86/net/bpf_jit_comp.c

@@ -158,6 +158,19 @@ static bool is_ereg(u32 reg)
 			     BIT(BPF_REG_AX));
 }
 
+/*
+ * is_ereg_8l() == true if BPF register 'reg' is mapped to access x86-64
+ * lower 8-bit registers dil,sil,bpl,spl,r8b..r15b, which need extra byte
+ * of encoding. al,cl,dl,bl have simpler encoding.
+ */
+static bool is_ereg_8l(u32 reg)
+{
+	return is_ereg(reg) ||
+	    (1 << reg) & (BIT(BPF_REG_1) |
+			  BIT(BPF_REG_2) |
+			  BIT(BPF_REG_FP));
+}
+
 static bool is_axreg(u32 reg)
 {
 	return reg == BPF_REG_0;
@@ -598,9 +611,8 @@ static void emit_stx(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, int off)
 	switch (size) {
 	case BPF_B:
 		/* Emit 'mov byte ptr [rax + off], al' */
-		if (is_ereg(dst_reg) || is_ereg(src_reg) ||
+		if (is_ereg(dst_reg) || is_ereg_8l(src_reg))
-		    /* We have to add extra byte for x86 SIL, DIL regs */
+			/* Add extra byte for eregs or SIL,DIL,BPL in src_reg */
-		    src_reg == BPF_REG_1 || src_reg == BPF_REG_2)
 			EMIT2(add_2mod(0x40, dst_reg, src_reg), 0x88);
 		else
 			EMIT1(0x88);

arch/x86/net/bpf_jit_comp32.c

@@ -1847,14 +1847,16 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 			case BPF_B:
 			case BPF_H:
 			case BPF_W:
-				if (!bpf_prog->aux->verifier_zext)
+				if (bpf_prog->aux->verifier_zext)
 					break;
 				if (dstk) {
 					EMIT3(0xC7, add_1reg(0x40, IA32_EBP),
 					      STACK_VAR(dst_hi));
 					EMIT(0x0, 4);
 				} else {
-					EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
+					/* xor dst_hi,dst_hi */
+					EMIT2(0x33,
+					      add_2reg(0xC0, dst_hi, dst_hi));
 				}
 				break;
 			case BPF_DW:
@@ -2013,8 +2015,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		case BPF_JMP | BPF_JSET | BPF_X:
 		case BPF_JMP32 | BPF_JSET | BPF_X: {
 			bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
-			u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
+			u8 dreg_lo = IA32_EAX;
-			u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+			u8 dreg_hi = IA32_EDX;
 			u8 sreg_lo = sstk ? IA32_ECX : src_lo;
 			u8 sreg_hi = sstk ? IA32_EBX : src_hi;
 
@@ -2026,6 +2028,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 					      add_2reg(0x40, IA32_EBP,
 						       IA32_EDX),
 					      STACK_VAR(dst_hi));
+			} else {
+				/* mov dreg_lo,dst_lo */
+				EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+				if (is_jmp64)
+					/* mov dreg_hi,dst_hi */
+					EMIT2(0x89,
+					      add_2reg(0xC0, dreg_hi, dst_hi));
 			}
 
 			if (sstk) {
@@ -2050,8 +2059,8 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 		case BPF_JMP | BPF_JSET | BPF_K:
 		case BPF_JMP32 | BPF_JSET | BPF_K: {
 			bool is_jmp64 = BPF_CLASS(insn->code) == BPF_JMP;
-			u8 dreg_lo = dstk ? IA32_EAX : dst_lo;
+			u8 dreg_lo = IA32_EAX;
-			u8 dreg_hi = dstk ? IA32_EDX : dst_hi;
+			u8 dreg_hi = IA32_EDX;
 			u8 sreg_lo = IA32_ECX;
 			u8 sreg_hi = IA32_EBX;
 			u32 hi;
@@ -2064,6 +2073,13 @@ static int do_jit(struct bpf_prog *bpf_prog, int *addrs, u8 *image,
 					      add_2reg(0x40, IA32_EBP,
 						       IA32_EDX),
 					      STACK_VAR(dst_hi));
+			} else {
+				/* mov dreg_lo,dst_lo */
+				EMIT2(0x89, add_2reg(0xC0, dreg_lo, dst_lo));
+				if (is_jmp64)
+					/* mov dreg_hi,dst_hi */
+					EMIT2(0x89,
+					      add_2reg(0xC0, dreg_hi, dst_hi));
 			}
 
 			/* mov ecx,imm32 */

arch/xtensa/include/asm/vermagic.h

@@ -1,8 +1,4 @@
 /*
- * include/asm-xtensa/module.h
- *
- * This file contains the module code specific to the Xtensa architecture.
- *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
@@ -10,11 +6,12 @@
  * Copyright (C) 2001 - 2005 Tensilica Inc.
  */
 
-#ifndef _XTENSA_MODULE_H
+#ifndef _ASM_VERMAGIC_H
-#define _XTENSA_MODULE_H
+#define _ASM_VERMAGIC_H
+
+#include <linux/stringify.h>
+#include <variant/core.h>
 
 #define MODULE_ARCH_VERMAGIC "xtensa-" __stringify(XCHAL_CORE_ID) " "
 
-#include <asm-generic/module.h>
+#endif	/* _ASM_VERMAGIC_H */
-
-#endif	/* _XTENSA_MODULE_H */

block/blk-iocost.c

@@ -1591,7 +1591,7 @@ skip_surplus_transfers:
 				      vrate_min, vrate_max);
 		}
 
-		trace_iocost_ioc_vrate_adj(ioc, vrate, &missed_ppm, rq_wait_pct,
+		trace_iocost_ioc_vrate_adj(ioc, vrate, missed_ppm, rq_wait_pct,
 					   nr_lagging, nr_shortages,
 					   nr_surpluses);
 
@@ -1600,7 +1600,7 @@ skip_surplus_transfers:
 			ioc->period_us * vrate * INUSE_MARGIN_PCT, 100);
 	} else if (ioc->busy_level != prev_busy_level || nr_lagging) {
 		trace_iocost_ioc_vrate_adj(ioc, atomic64_read(&ioc->vtime_rate),
-					   &missed_ppm, rq_wait_pct, nr_lagging,
+					   missed_ppm, rq_wait_pct, nr_lagging,
 					   nr_shortages, nr_surpluses);
 	}
 

block/blk-mq.c

@@ -1222,8 +1222,10 @@ bool blk_mq_dispatch_rq_list(struct request_queue *q, struct list_head *list,
 		rq = list_first_entry(list, struct request, queuelist);
 
 		hctx = rq->mq_hctx;
-		if (!got_budget && !blk_mq_get_dispatch_budget(hctx))
+		if (!got_budget && !blk_mq_get_dispatch_budget(hctx)) {
+			blk_mq_put_driver_tag(rq);
 			break;
+		}
 
 		if (!blk_mq_get_driver_tag(rq)) {
 			/*

block/blk-wbt.c

@@ -313,7 +313,7 @@ static void scale_up(struct rq_wb *rwb)
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
 	rwb_wake_all(rwb);
-	rwb_trace_step(rwb, "scale up");
+	rwb_trace_step(rwb, tracepoint_string("scale up"));
 }
 
 static void scale_down(struct rq_wb *rwb, bool hard_throttle)
@@ -322,7 +322,7 @@ static void scale_down(struct rq_wb *rwb, bool hard_throttle)
 		return;
 	calc_wb_limits(rwb);
 	rwb->unknown_cnt = 0;
-	rwb_trace_step(rwb, "scale down");
+	rwb_trace_step(rwb, tracepoint_string("scale down"));
 }
 
 static void rwb_arm_timer(struct rq_wb *rwb)

drivers/acpi/button.c

@@ -87,18 +87,6 @@ static const struct dmi_system_id dmi_lid_quirks[] = {
 		},
 		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_DISABLED,
 	},
-	{
-		/*
-		 * Asus T200TA, _LID keeps reporting closed after every second
-		 * openening of the lid. Causing immediate re-suspend after
-		 * opening every other open. Using LID_INIT_OPEN fixes this.
-		 */
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
-		},
-		.driver_data = (void *)(long)ACPI_BUTTON_LID_INIT_OPEN,
-	},
 	{
 		/* GP-electronic T701, _LID method points to a floating GPIO */
 		.matches = {

drivers/acpi/pci_link.c

@@ -322,10 +322,10 @@ static int acpi_pci_link_set(struct acpi_pci_link *link, int irq)
 		resource->res.data.extended_irq.polarity =
 		    link->irq.polarity;
 		if (link->irq.triggering == ACPI_EDGE_SENSITIVE)
-			resource->res.data.irq.shareable =
+			resource->res.data.extended_irq.shareable =
 			    ACPI_EXCLUSIVE;
 		else
-			resource->res.data.irq.shareable = ACPI_SHARED;
+			resource->res.data.extended_irq.shareable = ACPI_SHARED;
 		resource->res.data.extended_irq.interrupt_count = 1;
 		resource->res.data.extended_irq.interrupts[0] = irq;
 		/* ignore resource_source, it's optional */

drivers/ata/ahci.c

@@ -410,6 +410,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x22a3), board_ahci_mobile }, /* Cherry Tr. AHCI */
 	{ PCI_VDEVICE(INTEL, 0x5ae3), board_ahci_mobile }, /* ApolloLake AHCI */
 	{ PCI_VDEVICE(INTEL, 0x34d3), board_ahci_mobile }, /* Ice Lake LP AHCI */
+	{ PCI_VDEVICE(INTEL, 0x02d3), board_ahci_mobile }, /* Comet Lake PCH-U AHCI */
 	{ PCI_VDEVICE(INTEL, 0x02d7), board_ahci_mobile }, /* Comet Lake PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */