UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

mtd: rawnand: fix indentation in Kconfig 

Rules about Kconfig are simple but in the raw NAND directory indentation
is somehow archaic. Fix the indentation in the whole file.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This commit is contained in:
Miquel Raynal 2018-07-18 09:04:12 +02:00
parent cc53d5ca38
commit d3691813b0
1 changed files with 45 additions and 45 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

90
drivers/mtd/nand/raw/Kconfig
View File

@ -44,12 +44,12 @@ config MTD_NAND_DENALI
tristate
config MTD_NAND_DENALI_PCI
tristate "Support Denali NAND controller on Intel Moorestown"
tristate "Support Denali NAND controller on Intel Moorestown"
select MTD_NAND_DENALI
depends on PCI
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
help
Enable the driver for NAND flash on Intel Moorestown, using the
Denali NAND controller core.
config MTD_NAND_DENALI_DT
tristate "Support Denali NAND controller as a DT device"
@ -80,7 +80,7 @@ config MTD_NAND_OMAP2
depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST
depends on HAS_IOMEM
help
Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4
and Keystone platforms.
config MTD_NAND_OMAP_BCH
@ -138,7 +138,7 @@ config MTD_NAND_NDFC
depends on 4xx
select MTD_NAND_ECC_SMC
help
NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
config MTD_NAND_S3C2410_CLKSTOP
bool "Samsung S3C NAND IDLE clock stop"
@ -170,40 +170,40 @@ config MTD_NAND_DISKONCHIP
these devices.
config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
bool "Advanced detection options for DiskOnChip"
depends on MTD_NAND_DISKONCHIP
help
This option allows you to specify nonstandard address at which to
probe for a DiskOnChip, or to change the detection options. You
are unlikely to need any of this unless you are using LinuxBIOS.
Say 'N'.
bool "Advanced detection options for DiskOnChip"
depends on MTD_NAND_DISKONCHIP
help
This option allows you to specify nonstandard address at which to
probe for a DiskOnChip, or to change the detection options. You
are unlikely to need any of this unless you are using LinuxBIOS.
Say 'N'.
config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
depends on MTD_NAND_DISKONCHIP
default "0"
---help---
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
This option allows you to specify a single address at which to probe
for the device, which is useful if you have other devices in that
range which get upset when they are probed.
hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
depends on MTD_NAND_DISKONCHIP
default "0"
help
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
This option allows you to specify a single address at which to probe
for the device, which is useful if you have other devices in that
range which get upset when they are probed.
(Note that on PowerPC, the normal probe will only check at
0xE4000000.)
(Note that on PowerPC, the normal probe will only check at
0xE4000000.)
Normally, you should leave this set to zero, to allow the probe at
the normal addresses.
Normally, you should leave this set to zero, to allow the probe at
the normal addresses.
config MTD_NAND_DISKONCHIP_PROBE_HIGH
bool "Probe high addresses"
depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
help
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
This option changes to make it probe between 0xFFFC8000 and
0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
useful to you. Say 'N'.
bool "Probe high addresses"
depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
help
By default, the probe for DiskOnChip devices will look for a
DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
This option changes to make it probe between 0xFFFC8000 and
0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
useful to you. Say 'N'.
config MTD_NAND_DISKONCHIP_BBTWRITE
bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
@ -345,13 +345,13 @@ config MTD_NAND_NANDSIM
MTD nand layer.
config MTD_NAND_GPMI_NAND
tristate "GPMI NAND Flash Controller driver"
depends on MXS_DMA
help
Enables NAND Flash support for IMX23, IMX28 or IMX6.
The GPMI controller is very powerful, with the help of BCH
module, it can do the hardware ECC. The GPMI supports several
NAND flashs at the same time.
tristate "GPMI NAND Flash Controller driver"
depends on MXS_DMA
help
Enables NAND Flash support for IMX23, IMX28 or IMX6.
The GPMI controller is very powerful, with the help of BCH
module, it can do the hardware ECC. The GPMI supports several
NAND flashs at the same time.
config MTD_NAND_BRCMNAND
tristate "Broadcom STB NAND controller"
@ -459,9 +459,9 @@ config MTD_NAND_SH_FLCTL
for NAND Flash using FLCTL.
config MTD_NAND_DAVINCI
tristate "Support NAND on DaVinci/Keystone SoC"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
help
tristate "Support NAND on DaVinci/Keystone SoC"
depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
help
Enable the driver for NAND flash chips on Texas Instruments
DaVinci/Keystone processors.
@ -489,7 +489,7 @@ config MTD_NAND_JZ4740
tristate "Support for JZ4740 SoC NAND controller"
depends on MACH_JZ4740
help
Enables support for NAND Flash on JZ4740 SoC based boards.
Enables support for NAND Flash on JZ4740 SoC based boards.
config MTD_NAND_JZ4780
tristate "Support for NAND on JZ4780 SoC"