diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 814ad0b46232..c3b8a6d63027 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -506,6 +506,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp1_uart2_default>; status = "disabled"; }; @@ -581,6 +583,9 @@ interrupts = ; clocks = <&gcc GCC_BLSP2_UART1_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart1_default>; + pinctrl-1 = <&blsp2_uart1_sleep>; status = "disabled"; }; @@ -599,6 +604,8 @@ interrupts = ; clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default"; + pinctrl-0 = <&blsp2_uart4_default>; status = "disabled"; }; @@ -639,6 +646,9 @@ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c6_default>; + pinctrl-1 = <&blsp2_i2c6_sleep>; #address-cells = <1>; #size-cells = <0>; }; @@ -1256,7 +1266,7 @@ }; }; - blsp1_uart2_active: blsp1-uart2-active { + blsp1_uart2_default: blsp1-uart2-default { rx { pins = "gpio5"; function = "blsp_uart2"; @@ -1272,7 +1282,7 @@ }; }; - blsp2_uart1_active: blsp2-uart1-active { + blsp2_uart1_default: blsp2-uart1-default { tx-rts { pins = "gpio41", "gpio44"; function = "blsp_uart7"; @@ -1295,7 +1305,7 @@ bias-pull-down; }; - blsp2_uart4_active: blsp2-uart4-active { + blsp2_uart4_default: blsp2-uart4-default { tx-rts { pins = "gpio53", "gpio56"; function = "blsp_uart10"; @@ -1406,7 +1416,19 @@ bias-pull-up; }; - /* BLSP2_I2C6 info is missing - nobody uses it though? */ + blsp2_i2c6_default: blsp2-i2c6-default { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-disable; + }; + + blsp2_i2c6_sleep: blsp2-i2c6-sleep { + pins = "gpio87", "gpio88"; + function = "blsp_i2c12"; + drive-strength = <2>; + bias-pull-up; + }; spi8_default: spi8_default { mosi {