[SCSI] 3ware 9000: handle use_sg != 0 for emulated commands

The attached patch updates the driver for the 3ware 9000 series to do
the following:

- Correctly handle single sgl's with use_sg = 1.

This is needed with the latest scsi-block-2.6 merge otherwise the 3w-9xxx
driver will not work.  I tested the patch James sent a few weeks back to fix
this, and it had a bug where the request_buffer was accessed in
twa_scsiop_execute_scsi_complete() when it was invalid.  This is a corrected
variation of that patch.

Signed-off-by: Adam Radford <linuxraid@amcc.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
This commit is contained in:
adam radford 2005-09-09 15:55:13 -07:00 committed by James Bottomley
parent c7ebbbce36
commit d327d08232
1 changed files with 24 additions and 6 deletions

View File

@ -59,6 +59,7 @@
Fix 'handled=1' ISR usage, remove bogus IRQ check.
Remove un-needed eh_abort handler.
Add support for embedded firmware error strings.
2.26.02.003 - Correctly handle single sgl's with use_sg=1.
*/
#include <linux/module.h>
@ -81,7 +82,7 @@
#include "3w-9xxx.h"
/* Globals */
#define TW_DRIVER_VERSION "2.26.02.002"
#define TW_DRIVER_VERSION "2.26.02.003"
static TW_Device_Extension *twa_device_extension_list[TW_MAX_SLOT];
static unsigned int twa_device_extension_count;
static int twa_major = -1;
@ -1805,6 +1806,8 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
if (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH) {
command_packet->sg_list[0].address = tw_dev->generic_buffer_phys[request_id];
command_packet->sg_list[0].length = TW_MIN_SGL_LENGTH;
if (tw_dev->srb[request_id]->sc_data_direction == DMA_TO_DEVICE || tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL)
memcpy(tw_dev->generic_buffer_virt[request_id], tw_dev->srb[request_id]->request_buffer, tw_dev->srb[request_id]->request_bufflen);
} else {
buffaddr = twa_map_scsi_single_data(tw_dev, request_id);
if (buffaddr == 0)
@ -1823,6 +1826,12 @@ static int twa_scsiop_execute_scsi(TW_Device_Extension *tw_dev, int request_id,
if (tw_dev->srb[request_id]->use_sg > 0) {
if ((tw_dev->srb[request_id]->use_sg == 1) && (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH)) {
if (tw_dev->srb[request_id]->sc_data_direction == DMA_TO_DEVICE || tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL) {
struct scatterlist *sg = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
char *buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
memcpy(tw_dev->generic_buffer_virt[request_id], buf, sg->length);
kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
command_packet->sg_list[0].address = tw_dev->generic_buffer_phys[request_id];
command_packet->sg_list[0].length = TW_MIN_SGL_LENGTH;
} else {
@ -1888,11 +1897,20 @@ out:
/* This function completes an execute scsi operation */
static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int request_id)
{
/* Copy the response if too small */
if ((tw_dev->srb[request_id]->request_buffer) && (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH)) {
memcpy(tw_dev->srb[request_id]->request_buffer,
tw_dev->generic_buffer_virt[request_id],
tw_dev->srb[request_id]->request_bufflen);
if (tw_dev->srb[request_id]->request_bufflen < TW_MIN_SGL_LENGTH &&
(tw_dev->srb[request_id]->sc_data_direction == DMA_FROM_DEVICE ||
tw_dev->srb[request_id]->sc_data_direction == DMA_BIDIRECTIONAL)) {
if (tw_dev->srb[request_id]->use_sg == 0) {
memcpy(tw_dev->srb[request_id]->request_buffer,
tw_dev->generic_buffer_virt[request_id],
tw_dev->srb[request_id]->request_bufflen);
}
if (tw_dev->srb[request_id]->use_sg == 1) {
struct scatterlist *sg = (struct scatterlist *)tw_dev->srb[request_id]->request_buffer;
char *buf = kmap_atomic(sg->page, KM_IRQ0) + sg->offset;
memcpy(buf, tw_dev->generic_buffer_virt[request_id], sg->length);
kunmap_atomic(buf - sg->offset, KM_IRQ0);
}
}
} /* End twa_scsiop_execute_scsi_complete() */