[PATCH] ide: restore support for AEC6280M cards in aec62xx.c
This patch adds missing initialization sequence, necessary to get the "Macintosh" version of AEC6280 cards to work in Linux. Without this patch, the driver hangs for several minutes trying to initialize the card and the kernel is left in an unstable state. This patch has been tested fine on ppc and i386. Signed-off-by: Thibaut VARENE <varenet@parisc-linux.org> Acked-by: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This commit is contained in:
parent
75b84e94aa
commit
d237bf4926
|
@ -262,6 +262,21 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
|
|||
else
|
||||
pci_set_drvdata(dev, (void *) aec6xxx_34_base);
|
||||
|
||||
/* These are necessary to get AEC6280 Macintosh cards to work */
|
||||
if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
|
||||
(dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
|
||||
u8 reg49h = 0, reg4ah = 0;
|
||||
/* Clear reset and test bits. */
|
||||
pci_read_config_byte(dev, 0x49, ®49h);
|
||||
pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
|
||||
/* Enable chip interrupt output. */
|
||||
pci_read_config_byte(dev, 0x4a, ®4ah);
|
||||
pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
|
||||
/* Enable burst mode. */
|
||||
pci_read_config_byte(dev, 0x4a, ®4ah);
|
||||
pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
|
||||
}
|
||||
|
||||
return dev->irq;
|
||||
}
|
||||
|
||||
|
|
Loading…
Reference in New Issue