mfd: Add new driver for MAX77650 PMIC
Add the core MFD driver for max77650 PMIC. We define five sub-devices for which the drivers will be added in subsequent patches. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
This commit is contained in:
parent
1946f9967c
commit
d0f6033450
|
@ -733,6 +733,20 @@ config MFD_MAX77620
|
|||
provides common support for accessing the device; additional drivers
|
||||
must be enabled in order to use the functionality of the device.
|
||||
|
||||
config MFD_MAX77650
|
||||
tristate "Maxim MAX77650/77651 PMIC Support"
|
||||
depends on I2C
|
||||
depends on OF || COMPILE_TEST
|
||||
select MFD_CORE
|
||||
select REGMAP_I2C
|
||||
help
|
||||
Say Y here to add support for Maxim Semiconductor MAX77650 and
|
||||
MAX77651 Power Management ICs. This is the core multifunction
|
||||
driver for interacting with the device. The module name is
|
||||
'max77650'. Additional drivers can be enabled in order to use
|
||||
the following functionalities of the device: GPIO, regulator,
|
||||
charger, LED, onkey.
|
||||
|
||||
config MFD_MAX77686
|
||||
tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
|
||||
depends on I2C
|
||||
|
|
|
@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o
|
|||
|
||||
obj-$(CONFIG_MFD_MAX14577) += max14577.o
|
||||
obj-$(CONFIG_MFD_MAX77620) += max77620.o
|
||||
obj-$(CONFIG_MFD_MAX77650) += max77650.o
|
||||
obj-$(CONFIG_MFD_MAX77686) += max77686.o
|
||||
obj-$(CONFIG_MFD_MAX77693) += max77693.o
|
||||
obj-$(CONFIG_MFD_MAX77843) += max77843.o
|
||||
|
|
|
@ -0,0 +1,232 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
//
|
||||
// Copyright (C) 2018 BayLibre SAS
|
||||
// Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||||
//
|
||||
// Core MFD driver for MAXIM 77650/77651 charger/power-supply.
|
||||
// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf
|
||||
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/mfd/max77650.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#define MAX77650_INT_GPI_F_MSK BIT(0)
|
||||
#define MAX77650_INT_GPI_R_MSK BIT(1)
|
||||
#define MAX77650_INT_GPI_MSK \
|
||||
(MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK)
|
||||
#define MAX77650_INT_nEN_F_MSK BIT(2)
|
||||
#define MAX77650_INT_nEN_R_MSK BIT(3)
|
||||
#define MAX77650_INT_TJAL1_R_MSK BIT(4)
|
||||
#define MAX77650_INT_TJAL2_R_MSK BIT(5)
|
||||
#define MAX77650_INT_DOD_R_MSK BIT(6)
|
||||
|
||||
#define MAX77650_INT_THM_MSK BIT(0)
|
||||
#define MAX77650_INT_CHG_MSK BIT(1)
|
||||
#define MAX77650_INT_CHGIN_MSK BIT(2)
|
||||
#define MAX77650_INT_TJ_REG_MSK BIT(3)
|
||||
#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4)
|
||||
#define MAX77650_INT_SYS_CTRL_MSK BIT(5)
|
||||
#define MAX77650_INT_SYS_CNFG_MSK BIT(6)
|
||||
|
||||
#define MAX77650_INT_GLBL_OFFSET 0
|
||||
#define MAX77650_INT_CHG_OFFSET 1
|
||||
|
||||
#define MAX77650_SBIA_LPM_MASK BIT(5)
|
||||
#define MAX77650_SBIA_LPM_DISABLED 0x00
|
||||
|
||||
enum {
|
||||
MAX77650_INT_GPI,
|
||||
MAX77650_INT_nEN_F,
|
||||
MAX77650_INT_nEN_R,
|
||||
MAX77650_INT_TJAL1_R,
|
||||
MAX77650_INT_TJAL2_R,
|
||||
MAX77650_INT_DOD_R,
|
||||
MAX77650_INT_THM,
|
||||
MAX77650_INT_CHG,
|
||||
MAX77650_INT_CHGIN,
|
||||
MAX77650_INT_TJ_REG,
|
||||
MAX77650_INT_CHGIN_CTRL,
|
||||
MAX77650_INT_SYS_CTRL,
|
||||
MAX77650_INT_SYS_CNFG,
|
||||
};
|
||||
|
||||
static const struct resource max77650_charger_resources[] = {
|
||||
DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"),
|
||||
DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"),
|
||||
};
|
||||
|
||||
static const struct resource max77650_gpio_resources[] = {
|
||||
DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"),
|
||||
};
|
||||
|
||||
static const struct resource max77650_onkey_resources[] = {
|
||||
DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"),
|
||||
DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"),
|
||||
};
|
||||
|
||||
static const struct mfd_cell max77650_cells[] = {
|
||||
{
|
||||
.name = "max77650-regulator",
|
||||
.of_compatible = "maxim,max77650-regulator",
|
||||
}, {
|
||||
.name = "max77650-charger",
|
||||
.of_compatible = "maxim,max77650-charger",
|
||||
.resources = max77650_charger_resources,
|
||||
.num_resources = ARRAY_SIZE(max77650_charger_resources),
|
||||
}, {
|
||||
.name = "max77650-gpio",
|
||||
.of_compatible = "maxim,max77650-gpio",
|
||||
.resources = max77650_gpio_resources,
|
||||
.num_resources = ARRAY_SIZE(max77650_gpio_resources),
|
||||
}, {
|
||||
.name = "max77650-led",
|
||||
.of_compatible = "maxim,max77650-led",
|
||||
}, {
|
||||
.name = "max77650-onkey",
|
||||
.of_compatible = "maxim,max77650-onkey",
|
||||
.resources = max77650_onkey_resources,
|
||||
.num_resources = ARRAY_SIZE(max77650_onkey_resources),
|
||||
},
|
||||
};
|
||||
|
||||
static const struct regmap_irq max77650_irqs[] = {
|
||||
[MAX77650_INT_GPI] = {
|
||||
.reg_offset = MAX77650_INT_GLBL_OFFSET,
|
||||
.mask = MAX77650_INT_GPI_MSK,
|
||||
.type = {
|
||||
.type_falling_val = MAX77650_INT_GPI_F_MSK,
|
||||
.type_rising_val = MAX77650_INT_GPI_R_MSK,
|
||||
.types_supported = IRQ_TYPE_EDGE_BOTH,
|
||||
},
|
||||
},
|
||||
REGMAP_IRQ_REG(MAX77650_INT_nEN_F,
|
||||
MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_nEN_R,
|
||||
MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R,
|
||||
MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R,
|
||||
MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_DOD_R,
|
||||
MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_THM,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_CHG,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_CHGIN,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_TJ_REG,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK),
|
||||
REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG,
|
||||
MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK),
|
||||
};
|
||||
|
||||
static const struct regmap_irq_chip max77650_irq_chip = {
|
||||
.name = "max77650-irq",
|
||||
.irqs = max77650_irqs,
|
||||
.num_irqs = ARRAY_SIZE(max77650_irqs),
|
||||
.num_regs = 2,
|
||||
.status_base = MAX77650_REG_INT_GLBL,
|
||||
.mask_base = MAX77650_REG_INTM_GLBL,
|
||||
.type_in_mask = true,
|
||||
.type_invert = true,
|
||||
.init_ack_masked = true,
|
||||
.clear_on_unmask = true,
|
||||
};
|
||||
|
||||
static const struct regmap_config max77650_regmap_config = {
|
||||
.name = "max77650",
|
||||
.reg_bits = 8,
|
||||
.val_bits = 8,
|
||||
};
|
||||
|
||||
static int max77650_i2c_probe(struct i2c_client *i2c)
|
||||
{
|
||||
struct regmap_irq_chip_data *irq_data;
|
||||
struct device *dev = &i2c->dev;
|
||||
struct irq_domain *domain;
|
||||
struct regmap *map;
|
||||
unsigned int val;
|
||||
int rv, id;
|
||||
|
||||
map = devm_regmap_init_i2c(i2c, &max77650_regmap_config);
|
||||
if (IS_ERR(map)) {
|
||||
dev_err(dev, "Unable to initialise I2C Regmap\n");
|
||||
return PTR_ERR(map);
|
||||
}
|
||||
|
||||
rv = regmap_read(map, MAX77650_REG_CID, &val);
|
||||
if (rv) {
|
||||
dev_err(dev, "Unable to read Chip ID\n");
|
||||
return rv;
|
||||
}
|
||||
|
||||
id = MAX77650_CID_BITS(val);
|
||||
switch (id) {
|
||||
case MAX77650_CID_77650A:
|
||||
case MAX77650_CID_77650C:
|
||||
case MAX77650_CID_77651A:
|
||||
case MAX77650_CID_77651B:
|
||||
break;
|
||||
default:
|
||||
dev_err(dev, "Chip not supported - ID: 0x%02x\n", id);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
/*
|
||||
* This IC has a low-power mode which reduces the quiescent current
|
||||
* consumption to ~5.6uA but is only suitable for systems consuming
|
||||
* less than ~2mA. Since this is not likely the case even on
|
||||
* linux-based wearables - keep the chip in normal power mode.
|
||||
*/
|
||||
rv = regmap_update_bits(map,
|
||||
MAX77650_REG_CNFG_GLBL,
|
||||
MAX77650_SBIA_LPM_MASK,
|
||||
MAX77650_SBIA_LPM_DISABLED);
|
||||
if (rv) {
|
||||
dev_err(dev, "Unable to change the power mode\n");
|
||||
return rv;
|
||||
}
|
||||
|
||||
rv = devm_regmap_add_irq_chip(dev, map, i2c->irq,
|
||||
IRQF_ONESHOT | IRQF_SHARED, 0,
|
||||
&max77650_irq_chip, &irq_data);
|
||||
if (rv) {
|
||||
dev_err(dev, "Unable to add Regmap IRQ chip\n");
|
||||
return rv;
|
||||
}
|
||||
|
||||
domain = regmap_irq_get_domain(irq_data);
|
||||
|
||||
return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
|
||||
max77650_cells, ARRAY_SIZE(max77650_cells),
|
||||
NULL, 0, domain);
|
||||
}
|
||||
|
||||
static const struct of_device_id max77650_of_match[] = {
|
||||
{ .compatible = "maxim,max77650" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, max77650_of_match);
|
||||
|
||||
static struct i2c_driver max77650_i2c_driver = {
|
||||
.driver = {
|
||||
.name = "max77650",
|
||||
.of_match_table = of_match_ptr(max77650_of_match),
|
||||
},
|
||||
.probe_new = max77650_i2c_probe,
|
||||
};
|
||||
module_i2c_driver(max77650_i2c_driver);
|
||||
|
||||
MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver");
|
||||
MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@baylibre.com>");
|
||||
MODULE_LICENSE("GPL v2");
|
|
@ -0,0 +1,59 @@
|
|||
/* SPDX-License-Identifier: GPL-2.0 */
|
||||
/*
|
||||
* Copyright (C) 2018 BayLibre SAS
|
||||
* Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
|
||||
*
|
||||
* Common definitions for MAXIM 77650/77651 charger/power-supply.
|
||||
*/
|
||||
|
||||
#ifndef MAX77650_H
|
||||
#define MAX77650_H
|
||||
|
||||
#include <linux/bits.h>
|
||||
|
||||
#define MAX77650_REG_INT_GLBL 0x00
|
||||
#define MAX77650_REG_INT_CHG 0x01
|
||||
#define MAX77650_REG_STAT_CHG_A 0x02
|
||||
#define MAX77650_REG_STAT_CHG_B 0x03
|
||||
#define MAX77650_REG_ERCFLAG 0x04
|
||||
#define MAX77650_REG_STAT_GLBL 0x05
|
||||
#define MAX77650_REG_INTM_GLBL 0x06
|
||||
#define MAX77650_REG_INTM_CHG 0x07
|
||||
#define MAX77650_REG_CNFG_GLBL 0x10
|
||||
#define MAX77650_REG_CID 0x11
|
||||
#define MAX77650_REG_CNFG_GPIO 0x12
|
||||
#define MAX77650_REG_CNFG_CHG_A 0x18
|
||||
#define MAX77650_REG_CNFG_CHG_B 0x19
|
||||
#define MAX77650_REG_CNFG_CHG_C 0x1a
|
||||
#define MAX77650_REG_CNFG_CHG_D 0x1b
|
||||
#define MAX77650_REG_CNFG_CHG_E 0x1c
|
||||
#define MAX77650_REG_CNFG_CHG_F 0x1d
|
||||
#define MAX77650_REG_CNFG_CHG_G 0x1e
|
||||
#define MAX77650_REG_CNFG_CHG_H 0x1f
|
||||
#define MAX77650_REG_CNFG_CHG_I 0x20
|
||||
#define MAX77650_REG_CNFG_SBB_TOP 0x28
|
||||
#define MAX77650_REG_CNFG_SBB0_A 0x29
|
||||
#define MAX77650_REG_CNFG_SBB0_B 0x2a
|
||||
#define MAX77650_REG_CNFG_SBB1_A 0x2b
|
||||
#define MAX77650_REG_CNFG_SBB1_B 0x2c
|
||||
#define MAX77650_REG_CNFG_SBB2_A 0x2d
|
||||
#define MAX77650_REG_CNFG_SBB2_B 0x2e
|
||||
#define MAX77650_REG_CNFG_LDO_A 0x38
|
||||
#define MAX77650_REG_CNFG_LDO_B 0x39
|
||||
#define MAX77650_REG_CNFG_LED0_A 0x40
|
||||
#define MAX77650_REG_CNFG_LED1_A 0x41
|
||||
#define MAX77650_REG_CNFG_LED2_A 0x42
|
||||
#define MAX77650_REG_CNFG_LED0_B 0x43
|
||||
#define MAX77650_REG_CNFG_LED1_B 0x44
|
||||
#define MAX77650_REG_CNFG_LED2_B 0x45
|
||||
#define MAX77650_REG_CNFG_LED_TOP 0x46
|
||||
|
||||
#define MAX77650_CID_MASK GENMASK(3, 0)
|
||||
#define MAX77650_CID_BITS(_reg) (_reg & MAX77650_CID_MASK)
|
||||
|
||||
#define MAX77650_CID_77650A 0x03
|
||||
#define MAX77650_CID_77650C 0x0a
|
||||
#define MAX77650_CID_77651A 0x06
|
||||
#define MAX77650_CID_77651B 0x08
|
||||
|
||||
#endif /* MAX77650_H */
|
Loading…
Reference in New Issue