New boards are
- Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. -----BEGIN PGP SIGNATURE----- iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmSGNgkQHGhlaWtvQHNu dGVjaC5kZQAKCRDzpnnJnNEdgZKNCACYvQvOTfXL9HMlYQ2Fftzm3GEa9IVUVAr2 qgKiGj+cUm9y2O7eQBl/GF+6KyCnBxjh+697lAsZtEz7M6onEi9WVjsISl2dLq7Y 4FOMWRTbzjzdMrEfg3mUUgcoMkvGkuAV8gwMTV6VKBDEegZm2/SFGQv76NpJy8Zy 7HewtUKNggQ2OO1z6/umsreKS5qxqcRsw37fAq+dUGtJb2v71kmvYL8aiGHpy5sK +fNxE1znXqcNu60btk+6iltXQ9tGlqH/lEH/gsCQ3uEgCLX9BId3vXyHPBVm9NiZ qfMO7DJWioTjybZ0rHWh8eSkQ/DCAd+2ZQmoLtC4s/f1EkeK7jve =V9LX -----END PGP SIGNATURE----- gpgsig -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmSSEDYACgkQYKtH/8kJ UifxHRAAw5jJdUvdZc1YkRJ3KvO4eu5fCzUaWFobM7YhztQ+mt4v8KZ1fDsN/oME V9Y1tGhjqL5NSRIhTyPvMzx4+jGor9PtiXMWVd35oqPY2lEeni94p8pXMipuZ6SE 7ifY+bioB5QX4QtmXrzrRNcD/s1mANGZCUaPcUOPyjkIc5qAVq5Eb1n/H2OuP56m V0gWXZB8gMibdq3tkG4shuwFTgbRd3pBNDiI1YR1M42BSOBUoIZoxg/IwP1MPgE0 tpeG9SqANTu6pBIrlgTLozRJdyV29EeCZ+Cp+qbRKtqd4SWLf/+FyxuAEAP7wPi+ r0ty3KaAMpFK+5zIlptDCCfTOnrgO5tweJHWfbem24nL73kFaQicT+l4b4WLh3oW 1YPhxWktsFhzkO+2IcnBUpb2GSHvasObxvzoMep1rZzy9D0W2OfiUroUJjcAEl6b NJuOUSDZaGo0XLv5EuJ8A6S3/4HQIS3HkJS47bD3TxMfj8jejCTF/Q79KCDqe3ub EsWfjKDxBFMoTlanZy2iLnudkKIAiD/mcjHfZAHCpmSq2y0z1JC70YEICDHcp9iT PRmDM0A9j0+csPUQ7YKZGpLHU/+/FNsJlVxAb2GWQ82HHrIULdqyXtbMJGjlv4j9 qCmDnhxOeMeTQcG270CAuf5LRYI9Fp5YlcIXAnk5V4+N8vCNbko= =QogT -----END PGP SIGNATURE----- Merge tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt New boards are - Indiedroid Nova (rk3588) - Add Edgeble Neural Compute Module 6B (rk3588) - FriendlyARM NanoPi R2C Plus (rk3328) - Anbernic RG353PS (rk3566) - Lunzn Fastrhino R66S / R68S (rk3568) The rk3588 got a lot of attention and gained support for the GIC ITS (needed an errata from Rockchip), timers, otp memory, saradc and sdio. The rk356x got support for its RGA block With all the core improvements to rk3588 support, the Rock5b got a lot improvements from that too, namely support for its PMIC, sd-card and saradc, as well as a clock-rate fix for its es8316 codec. Similarly the rk3588-evb1 also got support for its PMIC. The Anberic RGxx3 series got a better bluetooth compatible and updates to its LEDs to make them use the PWM blocks they're connected to. * tag 'v6.5-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits) arm64: dts: rockchip: Add saradc node to rock5b arm64: dts: rockchip: Fix compatible for Bluetooth on rk3566-anbernic arm64: dts: rockchip: Add SD card support to rock-5b arm64: dts: rockchip: add PMIC to rock-5b arm64: dts: rockchip: Assign ES8316 MCLK rate on rk3588-rock-5b arm64: dts: rockchip: Add Indiedroid Nova board dt-bindings: arm: rockchip: Add Indiedroid Nova dt-bindings: vendor-prefixes: add Indiedroid arm64: dts: rockchip: Add sdio node to rk3588 arm64: dts: rockchip: add default pinctrl for rk3588 emmc arm64: dts: rockchip: Add DT node for ADC support in RK3588 arm64: dts: rockchip: add PMIC to rk3588-evb1 arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B IO arm64: dts: rockchip: Add rk3588 Edgeble Neu6 Model B SoM arm64: dts: rockchip: Add Rockchip RK3588J dt-bindings: arm: rockchip: Add Edgeble Neural Compute Module 6B arm64: dts: rockchip: Add RGA2 support to rk356x media: dt-bindings: media: rockchip-rga: add rockchip,rk3568-rga arm64: dts: rockchip: Add rk3588 OTP node arm64: dts: rockchip: Add FriendlyARM NanoPi R2C Plus ... Link: https://lore.kernel.org/r/3239799.44csPzL39Z@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This commit is contained in:
Arnd Bergmann
commit
d0b5886bee
|
|
@ -40,6 +40,11 @@ properties:
|
|||
- const: anbernic,rg353p
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Anbernic RG353PS
|
||||
items:
|
||||
- const: anbernic,rg353ps
|
||||
- const: rockchip,rk3566
|
||||
|
||||
- description: Anbernic RG353V
|
||||
items:
|
||||
- const: anbernic,rg353v
|
||||
|
|
@ -102,6 +107,12 @@ properties:
|
|||
- const: edgeble,neural-compute-module-6a # Edgeble Neural Compute Module 6A SoM
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Edgeble Neural Compute Module 6(Neu6) Model B SoM based boards
|
||||
items:
|
||||
- const: edgeble,neural-compute-module-6b-io # Edgeble Neural Compute Module 6B IO Board
|
||||
- const: edgeble,neural-compute-module-6b # Edgeble Neural Compute Module 6B SoM
|
||||
- const: rockchip,rk3588
|
||||
|
||||
- description: Elgin RV1108 R1
|
||||
items:
|
||||
- const: elgin,rv1108-r1
|
||||
|
|
@ -189,6 +200,7 @@ properties:
|
|||
items:
|
||||
- enum:
|
||||
- friendlyarm,nanopi-r2c
|
||||
- friendlyarm,nanopi-r2c-plus
|
||||
- friendlyarm,nanopi-r2s
|
||||
- const: rockchip,rk3328
|
||||
|
||||
|
|
@ -534,6 +546,11 @@ properties:
|
|||
- const: hugsun,x99
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Indiedroid Nova SBC
|
||||
items:
|
||||
- const: indiedroid,nova
|
||||
- const: rockchip,rk3588s
|
||||
|
||||
- description: Khadas Edge series boards
|
||||
items:
|
||||
- enum:
|
||||
|
|
@ -562,6 +579,13 @@ properties:
|
|||
- const: leez,p710
|
||||
- const: rockchip,rk3399
|
||||
|
||||
- description: Lunzn FastRhino R66S / R68S
|
||||
items:
|
||||
- enum:
|
||||
- lunzn,fastrhino-r66s
|
||||
- lunzn,fastrhino-r68s
|
||||
- const: rockchip,rk3568
|
||||
|
||||
- description: mqmaker MiQi
|
||||
items:
|
||||
- const: mqmaker,miqi
|
||||
|
|
|
|||
|
|
@ -21,7 +21,9 @@ properties:
|
|||
- const: rockchip,rk3288-rga
|
||||
- const: rockchip,rk3399-rga
|
||||
- items:
|
||||
- const: rockchip,rk3228-rga
|
||||
- enum:
|
||||
- rockchip,rk3228-rga
|
||||
- rockchip,rk3568-rga
|
||||
- const: rockchip,rk3288-rga
|
||||
|
||||
reg:
|
||||
|
|
|
|||
|
|
@ -619,6 +619,8 @@ patternProperties:
|
|||
description: Integrated Micro-Electronics Inc.
|
||||
"^incircuit,.*":
|
||||
description: In-Circuit GmbH
|
||||
"^indiedroid,.*":
|
||||
description: Indiedroid
|
||||
"^inet-tek,.*":
|
||||
description: Shenzhen iNet Mobile Internet Technology Co., Ltd
|
||||
"^infineon,.*":
|
||||
|
|
@ -783,6 +785,8 @@ patternProperties:
|
|||
description: Nanjing Loongmasses Ltd.
|
||||
"^lsi,.*":
|
||||
description: LSI Corp. (LSI Logic)
|
||||
"^lunzn,.*":
|
||||
description: Shenzhen Lunzn Technology Co., Ltd.
|
||||
"^lwn,.*":
|
||||
description: Liebherr-Werk Nenzing GmbH
|
||||
"^lxa,.*":
|
||||
|
|
|
|||
|
|
@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2c-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-orangepi-r1-plus-lts.dtb
|
||||
|
|
@ -69,6 +70,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353p.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353ps.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353v.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg353vs.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg503.dtb
|
||||
|
|
@ -85,6 +87,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
|
||||
|
|
@ -92,7 +96,9 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
|
|||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-radxa-e25.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-rock-3a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6a-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-edgeble-neu6b-io.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-evb1-v10.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-indiedroid-nova.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-khadas-edge2.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588s-rock-5a.dtb
|
||||
|
|
|
|||
|
|
@ -0,0 +1,33 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (c) 2021 FriendlyElec Computer Tech. Co., Ltd.
|
||||
* (http://www.friendlyarm.com)
|
||||
*
|
||||
* Copyright (c) 2023 Tianling Shen <cnsztl@gmail.com>
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3328-nanopi-r2c.dts"
|
||||
|
||||
/ {
|
||||
model = "FriendlyElec NanoPi R2C Plus";
|
||||
compatible = "friendlyarm,nanopi-r2c-plus", "rockchip,rk3328";
|
||||
|
||||
aliases {
|
||||
mmc1 = &emmc;
|
||||
};
|
||||
};
|
||||
|
||||
&emmc {
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
max-frequency = <150000000>;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
|
||||
vmmc-supply = <&vcc_io_33>;
|
||||
vqmmc-supply = <&vcc18_emmc>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,116 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include "rk3566-anbernic-rg353x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "RG353PS";
|
||||
compatible = "anbernic,rg353ps", "rockchip,rk3566";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc0;
|
||||
mmc1 = &sdmmc1;
|
||||
mmc2 = &sdmmc2;
|
||||
};
|
||||
|
||||
battery: battery {
|
||||
compatible = "simple-battery";
|
||||
charge-full-design-microamp-hours = <3472000>;
|
||||
charge-term-current-microamp = <300000>;
|
||||
constant-charge-current-max-microamp = <2000000>;
|
||||
constant-charge-voltage-max-microvolt = <4200000>;
|
||||
factory-internal-resistance-micro-ohms = <117000>;
|
||||
voltage-max-design-microvolt = <4172000>;
|
||||
voltage-min-design-microvolt = <3400000>;
|
||||
|
||||
ocv-capacity-celsius = <20>;
|
||||
ocv-capacity-table-0 = <4172000 100>, <4054000 95>, <3984000 90>, <3926000 85>,
|
||||
<3874000 80>, <3826000 75>, <3783000 70>, <3746000 65>,
|
||||
<3714000 60>, <3683000 55>, <3650000 50>, <3628000 45>,
|
||||
<3612000 40>, <3600000 35>, <3587000 30>, <3571000 25>,
|
||||
<3552000 20>, <3525000 15>, <3492000 10>, <3446000 5>,
|
||||
<3400000 0>;
|
||||
};
|
||||
|
||||
/* Channels reversed for both headphones and speakers. */
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "rk817_ext";
|
||||
simple-audio-card,aux-devs = <&spk_amp>;
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,hp-det-gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
simple-audio-card,mclk-fs = <256>;
|
||||
simple-audio-card,widgets =
|
||||
"Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones",
|
||||
"Speaker", "Internal Speakers";
|
||||
simple-audio-card,routing =
|
||||
"MICL", "Mic Jack",
|
||||
"Headphones", "HPOL",
|
||||
"Headphones", "HPOR",
|
||||
"Internal Speakers", "Speaker Amp OUTL",
|
||||
"Internal Speakers", "Speaker Amp OUTR",
|
||||
"Speaker Amp INL", "HPOL",
|
||||
"Speaker Amp INR", "HPOR";
|
||||
simple-audio-card,pin-switches = "Internal Speakers";
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&rk817>;
|
||||
};
|
||||
|
||||
simple-audio-card,cpu {
|
||||
sound-dai = <&i2s1_8ch>;
|
||||
};
|
||||
};
|
||||
|
||||
spk_amp: audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&spk_amp_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
};
|
||||
};
|
||||
|
||||
&gpio_keys_control {
|
||||
button-r1 {
|
||||
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
|
||||
label = "TR";
|
||||
linux,code = <BTN_TR>;
|
||||
};
|
||||
|
||||
button-r2 {
|
||||
gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>;
|
||||
label = "TR2";
|
||||
linux,code = <BTN_TR2>;
|
||||
};
|
||||
};
|
||||
|
||||
&panel {
|
||||
compatible = "anbernic,rg353v-panel-v2";
|
||||
iovcc-supply = <&vcc3v3_lcd0_n>;
|
||||
vcc-supply = <&vcc3v3_lcd0_n>;
|
||||
/delete-property/ vdd-supply;
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
audio-amplifier {
|
||||
spk_amp_enable_h: spk-amp-enable-h {
|
||||
rockchip,pins =
|
||||
<4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rk817 {
|
||||
rk817_charger: charger {
|
||||
monitored-battery = <&battery>;
|
||||
rockchip,resistor-sense-micro-ohms = <10000>;
|
||||
rockchip,sleep-enter-current-microamp = <300000>;
|
||||
rockchip,sleep-filter-current-microamp = <100000>;
|
||||
};
|
||||
};
|
||||
|
|
@ -191,30 +191,30 @@
|
|||
};
|
||||
};
|
||||
|
||||
leds: gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
leds: pwm-leds {
|
||||
compatible = "pwm-leds";
|
||||
|
||||
green_led: led-0 {
|
||||
color = <LED_COLOR_ID_GREEN>;
|
||||
default-state = "on";
|
||||
function = LED_FUNCTION_POWER;
|
||||
gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm6 0 25000 0>;
|
||||
};
|
||||
|
||||
amber_led: led-1 {
|
||||
color = <LED_COLOR_ID_AMBER>;
|
||||
function = LED_FUNCTION_CHARGING;
|
||||
gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
retain-state-suspended;
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm7 0 25000 0>;
|
||||
};
|
||||
|
||||
red_led: led-2 {
|
||||
color = <LED_COLOR_ID_RED>;
|
||||
default-state = "off";
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_HIGH>;
|
||||
max-brightness = <255>;
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -597,15 +597,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
gpio-led {
|
||||
led_pins: led-pins {
|
||||
rockchip,pins =
|
||||
<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>,
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
joy-mux {
|
||||
joy_mux_en: joy-mux-en {
|
||||
rockchip,pins =
|
||||
|
|
@ -654,10 +645,24 @@
|
|||
vccio7-supply = <&vcc_3v3>;
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
pinctrl-0 = <&pwm0m1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcc_1v8>;
|
||||
status = "okay";
|
||||
|
|
@ -716,7 +721,7 @@
|
|||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8822cs-bt";
|
||||
compatible = "realtek,rtl8821cs-bt", "realtek,rtl8723bs-bt";
|
||||
device-wake-gpios = <&gpio4 4 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio4 5 GPIO_ACTIVE_HIGH>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,27 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "rk3568-fastrhino-r66s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Lunzn FastRhino R66S";
|
||||
compatible = "lunzn,fastrhino-r66s", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdmmc0;
|
||||
};
|
||||
};
|
||||
|
||||
&sdmmc0 {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
|
||||
vmmc-supply = <&vcc3v3_sd>;
|
||||
vqmmc-supply = <&vccio_sd>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,484 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/soc/rockchip,vop2.h>
|
||||
#include "rk3568.dtsi"
|
||||
|
||||
/ {
|
||||
chosen: chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&reset_button_pin>;
|
||||
|
||||
button-reset {
|
||||
debounce-interval = <50>;
|
||||
gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
|
||||
label = "reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&status_led_pin>;
|
||||
|
||||
status_led: led-status {
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_STATUS;
|
||||
gpios = <&gpio0 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
dc_12v: dc-12v-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
|
||||
vcc3v3_pcie: vcc3v3-pcie-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_pcie";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_host: vcc5v0-usb-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_usb_host";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_usb_otg_en>;
|
||||
regulator-name = "vcc5v0_usb_otg";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&combphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&combphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vdd_cpu>;
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu: regulator@1c {
|
||||
compatible = "tcs,tcs4525";
|
||||
reg = <0x1c>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_cpu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-ramp-delay = <2300>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
rk809: pmic@20 {
|
||||
compatible = "rockchip,rk809";
|
||||
reg = <0x20>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int>;
|
||||
rockchip,system-power-controller;
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc5-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
wakeup-source;
|
||||
|
||||
regulators {
|
||||
vdd_logic: DCDC_REG1 {
|
||||
regulator-name = "vdd_logic";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: DCDC_REG2 {
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-always-on;
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-initial-mode = <0x2>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu: DCDC_REG4 {
|
||||
regulator-name = "vdd_npu";
|
||||
regulator-init-microvolt = <900000>;
|
||||
regulator-initial-mode = <0x2>;
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG5 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_image: LDO_REG1 {
|
||||
regulator-name = "vdda0v9_image";
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v9: LDO_REG2 {
|
||||
regulator-name = "vdda_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda0v9_pmu: LDO_REG3 {
|
||||
regulator-name = "vdda0v9_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_acodec: LDO_REG4 {
|
||||
regulator-name = "vccio_acodec";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd: LDO_REG5 {
|
||||
regulator-name = "vccio_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_pmu: LDO_REG6 {
|
||||
regulator-name = "vcc3v3_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8: LDO_REG7 {
|
||||
regulator-name = "vcca_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_pmu: LDO_REG8 {
|
||||
regulator-name = "vcca1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_image: LDO_REG9 {
|
||||
regulator-name = "vcca1v8_image";
|
||||
regulator-init-microvolt = <950000>;
|
||||
regulator-min-microvolt = <950000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <950000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3: SWITCH_REG1 {
|
||||
regulator-name = "vcc_3v3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_sd: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_sd";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pcie30phy {
|
||||
data-lanes = <1 2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x1 {
|
||||
num-lanes = <1>;
|
||||
reset-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie3x2 {
|
||||
num-lanes = <1>;
|
||||
reset-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
vpcie3v3-supply = <&vcc3v3_pcie>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gpio-leds {
|
||||
status_led_pin: status-led-pin {
|
||||
rockchip,pins = <0 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int: pmic-int {
|
||||
rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
rockchip-key {
|
||||
reset_button_pin: reset-button-pin {
|
||||
rockchip,pins = <0 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb {
|
||||
vcc5v0_usb_otg_en: vcc5v0-usb-otg-en {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmuio1-supply = <&vcc3v3_pmu>;
|
||||
pmuio2-supply = <&vcc3v3_pmu>;
|
||||
vccio1-supply = <&vccio_acodec>;
|
||||
vccio3-supply = <&vccio_sd>;
|
||||
vccio4-supply = <&vcc_1v8>;
|
||||
vccio5-supply = <&vcc_3v3>;
|
||||
vccio6-supply = <&vcc_1v8>;
|
||||
vccio7-supply = <&vcc_3v3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca_1v8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
rockchip,hw-tshut-polarity = <0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_xhci {
|
||||
dr_mode = "host";
|
||||
extcon = <&usb2phy0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_xhci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_host {
|
||||
phy-supply = <&vcc5v0_usb_host>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2phy0_otg {
|
||||
phy-supply = <&vcc5v0_usb_otg>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop {
|
||||
assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
|
||||
assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vop_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "rk3568-fastrhino-r66s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Lunzn FastRhino R68S";
|
||||
compatible = "lunzn,fastrhino-r68s", "rockchip,rk3568";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &gmac0;
|
||||
ethernet1 = &gmac1;
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 0>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1800000>;
|
||||
|
||||
button-recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <1750>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy0>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac0_miim
|
||||
&gmac0_tx_bus2
|
||||
&gmac0_rx_bus2
|
||||
&gmac0_rgmii_clk
|
||||
&gmac0_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 15ms, 50ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 15000 50000>;
|
||||
tx_delay = <0x3c>;
|
||||
rx_delay = <0x2f>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
|
||||
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
|
||||
assigned-clock-rates = <0>, <125000000>;
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy1>;
|
||||
phy-mode = "rgmii-id";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gmac1m1_miim
|
||||
&gmac1m1_tx_bus2
|
||||
&gmac1m1_rx_bus2
|
||||
&gmac1m1_rgmii_clk
|
||||
&gmac1m1_rgmii_bus>;
|
||||
snps,reset-gpio = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
/* Reset time is 15ms, 50ms for rtl8211f */
|
||||
snps,reset-delays-us = <0 15000 50000>;
|
||||
tx_delay = <0x4f>;
|
||||
rx_delay = <0x26>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mdio0 {
|
||||
rgmii_phy0: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
pinctrl-0 = <ð_phy0_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&mdio1 {
|
||||
rgmii_phy1: ethernet-phy@0 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <0>;
|
||||
pinctrl-0 = <ð_phy1_reset_pin>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
gmac0 {
|
||||
eth_phy0_reset_pin: eth-phy0-reset-pin {
|
||||
rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
gmac1 {
|
||||
eth_phy1_reset_pin: eth-phy1-reset-pin {
|
||||
rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
max-frequency = <200000000>;
|
||||
non-removable;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -613,6 +613,17 @@
|
|||
#iommu-cells = <0>;
|
||||
};
|
||||
|
||||
rga: rga@fdeb0000 {
|
||||
compatible = "rockchip,rk3568-rga", "rockchip,rk3288-rga";
|
||||
reg = <0x0 0xfdeb0000 0x0 0x180>;
|
||||
interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru CLK_RGA_CORE>;
|
||||
clock-names = "aclk", "hclk", "sclk";
|
||||
resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
|
||||
reset-names = "core", "axi", "ahb";
|
||||
power-domains = <&power RK3568_PD_RGA>;
|
||||
};
|
||||
|
||||
vepu: video-codec@fdee0000 {
|
||||
compatible = "rockchip,rk3568-vepu";
|
||||
reg = <0x0 0xfdee0000 0x0 0x800>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,27 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "rk3588j.dtsi"
|
||||
#include "rk3588-edgeble-neu6b.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Edgeble Neu6B IO Board";
|
||||
compatible = "edgeble,neural-compute-module-6b-io",
|
||||
"edgeble,neural-compute-module-6b", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2023 Edgeble AI Technologies Pvt. Ltd.
|
||||
*/
|
||||
|
||||
/ {
|
||||
compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
};
|
||||
|
||||
vcc12v_dcin: vcc12v-dcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc12v_dcin";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
no-sd;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -49,6 +49,38 @@
|
|||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3 {
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
clock_in_out = "output";
|
||||
phy-handle = <&rgmii_phy>;
|
||||
|
|
@ -123,6 +155,611 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <2>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
pinctrl-names = "default";
|
||||
spi-max-frequency = <1000000>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc5v0_sys>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_npu_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
vdd_gpu_mem_s0: dcdc-reg5 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-name = "vdd_gpu_mem_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
vdd_npu_mem_s0: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_npu_mem_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_mem_s0: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_mem_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1100000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd1_1v8_ddr_s3: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd1_1v8_ddr_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_codec_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "avcc_1v8_codec_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_1v8_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_1v8_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2l_0v9_ddr_s3: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-name = "vdd2l_0v9_ddr_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <900000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_hdmi_edp_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_hdmi_edp_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
pmic@1 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x01>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&rk806_slave_dvs1_null>, <&rk806_slave_dvs2_null>,
|
||||
<&rk806_slave_dvs3_null>;
|
||||
pinctrl-names = "default";
|
||||
spi-max-frequency = <1000000>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_slave_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl1";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_slave_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_slave_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_cpu_big1_s0: dcdc-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big0_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_mem_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_big1_mem_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
vdd_cpu_big0_mem_s0: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_big0_mem_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_mem_s0: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_mem_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_cam_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_1v8_cam_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avdd1v8_ddr_pll_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "avdd1v8_ddr_pll_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_1v8_pll_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_1v8_pll_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_sd_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_sd_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v8_cam_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2800000>;
|
||||
regulator-max-microvolt = <2800000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_2v8_cam_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_pll_s0: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_0v75_pll_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v85_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "avdd_0v85_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_cam_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "avdd_1v2_cam_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -51,6 +51,16 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
|
|
@ -69,6 +79,22 @@
|
|||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
|
|
@ -133,6 +159,8 @@
|
|||
reg = <0x11>;
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
clock-names = "mclk";
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
|
|
@ -179,6 +207,11 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&avcc_1v8_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-sdio;
|
||||
|
|
@ -190,6 +223,344 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
|
||||
num-cs = <1>;
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
spi-max-frequency = <1000000>;
|
||||
reg = <0x0>;
|
||||
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_log_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_log_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-init-microvolt = <750000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "avcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-name = "avdd_1v2_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
pldo6_s3: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-name = "pldo6_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_ddr_pll_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdd_0v85_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s0: nldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s0";
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
|
|
|
|||
|
|
@ -0,0 +1,7 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2022 Rockchip Electronics Co., Ltd.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "rk3588.dtsi"
|
||||
|
|
@ -0,0 +1,763 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/pinctrl/rockchip.h>
|
||||
#include <dt-bindings/usb/pd.h>
|
||||
#include "rk3588s.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Indiedroid Nova";
|
||||
compatible = "indiedroid,nova", "rockchip,rk3588s";
|
||||
|
||||
aliases {
|
||||
mmc0 = &sdhci;
|
||||
mmc1 = &sdmmc;
|
||||
mmc2 = &sdio;
|
||||
serial2 = &uart2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clock-names = "ext_clock";
|
||||
clocks = <&rtc_hym8563>;
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
pinctrl-names = "default";
|
||||
post-power-on-delay-ms = <200>;
|
||||
reset-gpios = <&gpio0 RK_PC7 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "audio-graph-card";
|
||||
label = "rockchip,es8388-codec";
|
||||
widgets = "Microphone", "Mic Jack",
|
||||
"Headphone", "Headphones";
|
||||
routing = "LINPUT2", "Mic Jack",
|
||||
"Headphones", "LOUT1",
|
||||
"Headphones", "ROUT1";
|
||||
dais = <&i2s0_8ch_p0>;
|
||||
};
|
||||
|
||||
vbus5v0_typec: vbus5v0-typec-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&typec5v_pwren>;
|
||||
pinctrl-names = "default";
|
||||
regulator-name = "vbus5v0_typec";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&vcc5v0_usb>;
|
||||
};
|
||||
|
||||
vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-name = "vcc_1v1_nldo_s3";
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
/* Regulator is enabled whenever vcc_1v8_s0 is above 1.6v */
|
||||
vcc_3v3_s0: vcc-3v3-s0-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s0";
|
||||
vin-supply = <&vcc_3v3_s3>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_sys";
|
||||
};
|
||||
|
||||
vcc5v0_usb: vcc5v0-usb-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_usb";
|
||||
vin-supply = <&vcc5v0_usbdcin>;
|
||||
};
|
||||
|
||||
vcc5v0_usbdcin: vcc5v0-usbdcin-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-name = "vcc5v0_usbdcin";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_lit_s0>;
|
||||
};
|
||||
|
||||
&cpu_b0{
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b1{
|
||||
cpu-supply = <&vdd_cpu_big0_s0>;
|
||||
};
|
||||
|
||||
&cpu_b2{
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
&cpu_b3{
|
||||
cpu-supply = <&vdd_cpu_big1_s0>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Add labels for each GPIO pin exposed on the 40 pin header. Note that
|
||||
* voltage of each GPIO pin could be either 3.3v or 1.8v (as noted by
|
||||
* label).
|
||||
*/
|
||||
&gpio0 {
|
||||
gpio-line-names = /* GPIO0 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 B0-B7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO0 D0-D7 */
|
||||
"HEADER_12_1v8", "", "", "HEADER_24_1v8",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio1 {
|
||||
gpio-line-names = /* GPIO1 A0-A7 */
|
||||
"HEADER_27_3v3", "HEADER_28_3v3", "", "",
|
||||
"HEADER_29_1v8", "", "HEADER_7_1v8", "",
|
||||
/* GPIO1 B0-B7 */
|
||||
"", "HEADER_31_1v8", "HEADER_33_1v8", "",
|
||||
"HEADER_11_1v8", "HEADER_13_1v8", "", "",
|
||||
/* GPIO1 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO1 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "HEADER_5_3v3", "HEADER_3_3v3";
|
||||
};
|
||||
|
||||
&gpio3 {
|
||||
gpio-line-names = /* GPIO3 A0-A7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO3 B0-B7 */
|
||||
"HEADER_16_1v8", "HEADER_18_1v8", "", "",
|
||||
"", "", "", "HEADER_19_1v8",
|
||||
/* GPIO3 C0-C7 */
|
||||
"HEADER_21_1v8", "HEADER_23_1v8", "", "HEADER_26_1v8",
|
||||
"HEADER_15_1v8", "HEADER_22_1v8", "", "",
|
||||
/* GPIO3 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
gpio-line-names = /* GPIO4 A0-A7 */
|
||||
"", "", "HEADER_37_3v3", "HEADER_32_3v3",
|
||||
"HEADER_36_3v3", "", "HEADER_35_3v3", "HEADER_38_3v3",
|
||||
/* GPIO4 B0-B7 */
|
||||
"", "", "", "HEADER_40_3v3",
|
||||
"HEADER_8_3v3", "HEADER_10_3v3", "", "",
|
||||
/* GPIO4 C0-C7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "",
|
||||
/* GPIO4 D0-D7 */
|
||||
"", "", "", "",
|
||||
"", "", "", "";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-0 = <&i2c0m2_xfer>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
vdd_cpu_big0_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_cpu_big0_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_big1_s0: regulator@43 {
|
||||
compatible = "rockchip,rk8603", "rockchip,rk8602";
|
||||
reg = <0x43>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1050000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_cpu_big1_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
|
||||
vdd_npu_s0: regulator@42 {
|
||||
compatible = "rockchip,rk8602";
|
||||
reg = <0x42>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_npu_s0";
|
||||
regulator-ramp-delay = <2300>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
pinctrl-0 = <&i2c6m3_xfer>;
|
||||
status = "okay";
|
||||
|
||||
fusb302: typec-portc@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PC4 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&usbc0_int>;
|
||||
pinctrl-names = "default";
|
||||
vbus-supply = <&vbus5v0_typec>;
|
||||
|
||||
connector {
|
||||
compatible = "usb-c-connector";
|
||||
data-role = "dual";
|
||||
label = "USB-C";
|
||||
power-role = "dual";
|
||||
try-power-role = "sink";
|
||||
source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
|
||||
sink-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
|
||||
op-sink-microwatt = <1000000>;
|
||||
};
|
||||
};
|
||||
|
||||
rtc_hym8563: rtc@51 {
|
||||
compatible = "haoyu,hym8563";
|
||||
reg = <0x51>;
|
||||
#clock-cells = <0>;
|
||||
clock-output-names = "hym8563";
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&hym8563_int>;
|
||||
pinctrl-names = "default";
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
pinctrl-0 = <&i2c7m0_xfer>;
|
||||
status = "okay";
|
||||
|
||||
es8388: audio-codec@11 {
|
||||
compatible = "everest,es8388";
|
||||
reg = <0x11>;
|
||||
assigned-clock-rates = <12288000>;
|
||||
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
AVDD-supply = <&vcc_3v3_s3>;
|
||||
clock-names = "mclk";
|
||||
clocks = <&cru I2S0_8CH_MCLKOUT>;
|
||||
DVDD-supply = <&vcc_1v8_s3>;
|
||||
HPVDD-supply = <&vcc_3v3_s3>;
|
||||
PVDD-supply = <&vcc_1v8_s3>;
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
port {
|
||||
es8388_p0_0: endpoint {
|
||||
remote-endpoint = <&i2s0_8ch_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0_8ch {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s0_lrck
|
||||
&i2s0_mclk
|
||||
&i2s0_sclk
|
||||
&i2s0_sdi0
|
||||
&i2s0_sdo0>;
|
||||
status = "okay";
|
||||
|
||||
i2s0_8ch_p0: port {
|
||||
i2s0_8ch_p0_0: endpoint {
|
||||
dai-format = "i2s";
|
||||
mclk-fs = <256>;
|
||||
remote-endpoint = <&es8388_p0_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
bluetooth-pins {
|
||||
bt_reset: bt-reset {
|
||||
rockchip,pins =
|
||||
<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_dev: bt-wake-dev {
|
||||
rockchip,pins =
|
||||
<0 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
bt_wake_host: bt-wake-host {
|
||||
rockchip,pins =
|
||||
<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
hym8563 {
|
||||
|
||||
hym8563_int: hym8563-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins =
|
||||
<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
usbc0_int: usbc0-int {
|
||||
rockchip,pins =
|
||||
<0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
typec5v_pwren: typec5v-pwren {
|
||||
rockchip,pins =
|
||||
<4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* HS400 modes seemed to cause io errors. */
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
no-mmc-hs400;
|
||||
no-sd;
|
||||
no-sdio;
|
||||
non-removable;
|
||||
max-frequency = <200000000>;
|
||||
vmmc-supply = <&vcc_3v3_s0>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdio {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cap-sdio-irq;
|
||||
disable-wp;
|
||||
keep-power-in-suspend;
|
||||
max-frequency = <100000000>;
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
no-mmc;
|
||||
no-sd;
|
||||
non-removable;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vcc_1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
disable-wp;
|
||||
max-frequency = <200000000>;
|
||||
no-sdio;
|
||||
no-mmc;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc_3v3_s3>;
|
||||
vqmmc-supply = <&vccio_sd_s0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
#address-cells = <1>;
|
||||
assigned-clocks = <&cru CLK_SPI2>;
|
||||
assigned-clock-rates = <200000000>;
|
||||
num-cs = <1>;
|
||||
pinctrl-0 = <&spi2m2_pins>, <&spi2m2_cs0>;
|
||||
pinctrl-names = "default";
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
pmic@0 {
|
||||
compatible = "rockchip,rk806";
|
||||
reg = <0x0>;
|
||||
#gpio-cells = <2>;
|
||||
gpio-controller;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
|
||||
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
|
||||
pinctrl-names = "default";
|
||||
spi-max-frequency = <1000000>;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc5-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc5v0_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc_2v0_pldo_s3>;
|
||||
vcc12-supply = <&vcc5v0_sys>;
|
||||
vcc13-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcc14-supply = <&vcc_1v1_nldo_s3>;
|
||||
vcca-supply = <&vcc5v0_sys>;
|
||||
|
||||
rk806_dvs1_null: dvs1-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs2_null: dvs2-null-pins {
|
||||
pins = "gpio_pwrctrl2";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
rk806_dvs3_null: dvs3-null-pins {
|
||||
pins = "gpio_pwrctrl3";
|
||||
function = "pin_fun0";
|
||||
};
|
||||
|
||||
regulators {
|
||||
vdd_gpu_s0: dcdc-reg1 {
|
||||
regulator-boot-on;
|
||||
regulator-enable-ramp-delay = <400>;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_gpu_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_lit_s0: dcdc-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_cpu_lit_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_logic_s0: dcdc-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-min-microvolt = <675000>;
|
||||
regulator-name = "vdd_logic_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_vdenc_s0: dcdc-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <950000>;
|
||||
regulator-min-microvolt = <550000>;
|
||||
regulator-name = "vdd_vdenc_s0";
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_ddr_s0: dcdc-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-ramp-delay = <12500>;
|
||||
regulator-name = "vdd_ddr_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd2_ddr_s3: dcdc-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1100000>;
|
||||
regulator-min-microvolt = <1100000>;
|
||||
regulator-name = "vdd2_ddr_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_2v0_pldo_s3: dcdc-reg7 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <2000000>;
|
||||
regulator-min-microvolt = <2000000>;
|
||||
regulator-name = "vdd_2v0_pldo_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <2000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v3_s3: dcdc-reg8 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcc_3v3_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vddq_ddr_s0: dcdc-reg9 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <600000>;
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-name = "vddq_ddr_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3: dcdc-reg10 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s0: pldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_1v8_s0: pldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcca_1v8_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_1v2_s0: pldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-name = "vdda_1v2_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcca_3v3_s0: pldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-name = "vcca_3v3_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vccio_sd_s0: pldo-reg5 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vccio_sd_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8_s3_pldo6: pldo-reg6 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-name = "vcc_1v8_s3_pldo6";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_0v75_s3: nldo-reg1 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-name = "vdd_0v75_s3";
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <750000>;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_ddr_pll_s0: nldo-reg2 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-name = "vdda_ddr_pll_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
regulator-suspend-microvolt = <850000>;
|
||||
};
|
||||
};
|
||||
|
||||
avdd_0v75_s0: nldo-reg3 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-max-microvolt = <750000>;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-name = "avdd_0v75_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdda_0v85_s0: nldo-reg4 {
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <850000>;
|
||||
regulator-max-microvolt = <850000>;
|
||||
regulator-name = "vdda_0v85_s0";
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
/* Schematics show not in use */
|
||||
nldo-reg5 {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-0 = <&uart2m0_xfer>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* DMA seems to interfere with bluetooth device normal operation. */
|
||||
&uart9 {
|
||||
pinctrl-0 = <&uart9m2_xfer>, <&uart9m2_ctsn>, <&uart9m2_rtsn>;
|
||||
pinctrl-names = "default";
|
||||
/delete-property/ dma-names;
|
||||
/delete-property/ dmas;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8821cs-bt",
|
||||
"realtek,rtl8723bs-bt";
|
||||
device-wake-gpios = <&gpio0 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
|
||||
host-wake-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-0 = <&bt_reset>, <&bt_wake_dev>, <&bt_wake_host>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
};
|
||||
|
|
@ -1176,6 +1176,21 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
sdio: mmc@fe2d0000 {
|
||||
compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
|
||||
reg = <0x00 0xfe2d0000 0x00 0x4000>;
|
||||
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru HCLK_SDIO>, <&cru CCLK_SRC_SDIO>,
|
||||
<&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
|
||||
clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
|
||||
fifo-depth = <0x100>;
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdiom1_pins>;
|
||||
power-domains = <&power RK3588_PD_SDIO>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
sdhci: mmc@fe2e0000 {
|
||||
compatible = "rockchip,rk3588-dwcmshc";
|
||||
reg = <0x0 0xfe2e0000 0x0 0x10000>;
|
||||
|
|
@ -1187,6 +1202,9 @@
|
|||
<&cru TMCLK_EMMC>;
|
||||
clock-names = "core", "bus", "axi", "block", "timer";
|
||||
max-frequency = <200000000>;
|
||||
pinctrl-0 = <&emmc_rstnout>, <&emmc_bus8>, <&emmc_clk>,
|
||||
<&emmc_cmd>, <&emmc_data_strobe>;
|
||||
pinctrl-names = "default";
|
||||
resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
|
||||
<&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
|
||||
<&cru SRST_T_EMMC>;
|
||||
|
|
@ -1300,7 +1318,24 @@
|
|||
mbi-alias = <0x0 0xfe610000>;
|
||||
mbi-ranges = <424 56>;
|
||||
msi-controller;
|
||||
ranges;
|
||||
#address-cells = <2>;
|
||||
#interrupt-cells = <4>;
|
||||
#size-cells = <2>;
|
||||
|
||||
its0: msi-controller@fe640000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
reg = <0x0 0xfe640000 0x0 0x20000>;
|
||||
msi-controller;
|
||||
#msi-cells = <1>;
|
||||
};
|
||||
|
||||
its1: msi-controller@fe660000 {
|
||||
compatible = "arm,gic-v3-its";
|
||||
reg = <0x0 0xfe660000 0x0 0x20000>;
|
||||
msi-controller;
|
||||
#msi-cells = <1>;
|
||||
};
|
||||
|
||||
ppi-partitions {
|
||||
ppi_partition0: interrupt-partition-0 {
|
||||
|
|
@ -1400,6 +1435,14 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
timer0: timer@feae0000 {
|
||||
compatible = "rockchip,rk3588-timer", "rockchip,rk3288-timer";
|
||||
reg = <0x0 0xfeae0000 0x0 0x20>;
|
||||
interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
clocks = <&cru PCLK_BUSTIMER0>, <&cru CLK_BUSTIMER0>;
|
||||
clock-names = "pclk", "timer";
|
||||
};
|
||||
|
||||
wdt: watchdog@feaf0000 {
|
||||
compatible = "rockchip,rk3588-wdt", "snps,dw-wdt";
|
||||
reg = <0x0 0xfeaf0000 0x0 0x100>;
|
||||
|
|
@ -1759,6 +1802,18 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
saradc: adc@fec10000 {
|
||||
compatible = "rockchip,rk3588-saradc";
|
||||
reg = <0x0 0xfec10000 0x0 0x10000>;
|
||||
interrupts = <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>;
|
||||
#io-channel-cells = <1>;
|
||||
clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
|
||||
clock-names = "saradc", "apb_pclk";
|
||||
resets = <&cru SRST_P_SARADC>;
|
||||
reset-names = "saradc-apb";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
i2c6: i2c@fec80000 {
|
||||
compatible = "rockchip,rk3588-i2c", "rockchip,rk3399-i2c";
|
||||
reg = <0x0 0xfec80000 0x0 0x1000>;
|
||||
|
|
@ -1814,6 +1869,60 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
otp: efuse@fecc0000 {
|
||||
compatible = "rockchip,rk3588-otp";
|
||||
reg = <0x0 0xfecc0000 0x0 0x400>;
|
||||
clocks = <&cru CLK_OTPC_NS>, <&cru PCLK_OTPC_NS>,
|
||||
<&cru CLK_OTP_PHY_G>, <&cru CLK_OTPC_ARB>;
|
||||
clock-names = "otp", "apb_pclk", "phy", "arb";
|
||||
resets = <&cru SRST_OTPC_NS>, <&cru SRST_P_OTPC_NS>,
|
||||
<&cru SRST_OTPC_ARB>;
|
||||
reset-names = "otp", "apb", "arb";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cpu_code: cpu-code@2 {
|
||||
reg = <0x02 0x2>;
|
||||
};
|
||||
|
||||
otp_id: id@7 {
|
||||
reg = <0x07 0x10>;
|
||||
};
|
||||
|
||||
cpub0_leakage: cpu-leakage@17 {
|
||||
reg = <0x17 0x1>;
|
||||
};
|
||||
|
||||
cpub1_leakage: cpu-leakage@18 {
|
||||
reg = <0x18 0x1>;
|
||||
};
|
||||
|
||||
cpul_leakage: cpu-leakage@19 {
|
||||
reg = <0x19 0x1>;
|
||||
};
|
||||
|
||||
log_leakage: log-leakage@1a {
|
||||
reg = <0x1a 0x1>;
|
||||
};
|
||||
|
||||
gpu_leakage: gpu-leakage@1b {
|
||||
reg = <0x1b 0x1>;
|
||||
};
|
||||
|
||||
otp_cpu_version: cpu-version@1c {
|
||||
reg = <0x1c 0x1>;
|
||||
bits = <3 3>;
|
||||
};
|
||||
|
||||
npu_leakage: npu-leakage@28 {
|
||||
reg = <0x28 0x1>;
|
||||
};
|
||||
|
||||
codec_leakage: codec-leakage@29 {
|
||||
reg = <0x29 0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
dmac2: dma-controller@fed10000 {
|
||||
compatible = "arm,pl330", "arm,primecell";
|
||||
reg = <0x0 0xfed10000 0x0 0x4000>;
|
||||
|
|
|
|||
Loading…
Reference in New Issue