UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

ARM: dts: add core I2C devices to the APQ8060 Dragonboard 

The APQ8060 Dragonboard has an Atmel AT24c128 EEPROM and a
Wolfson Micro WM8903 codec connected to its GSBI8 I2C bus.
Add entries for these to the device tree. The interrupt line
from the WM8903 chip is not routed anywhere on this design
so it can not be used.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This commit is contained in:
Linus Walleij 2017-05-15 09:50:34 +02:00 committed by Andy Gross
parent 5594207294
commit cff94887d5
1 changed files with 49 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

49
arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
View File

@ -180,6 +180,19 @@
};
};
dragon_gsbi8_i2c_pins: gsbi8_i2c {
mux {
pins = "gpio64", "gpio65";
function = "gsbi8";
};
pinconf {
pins = "gpio64", "gpio65";
drive-strength = <16>;
/* These have external pull-up 2.2kOhm to 1.8V */
bias-disable;
};
};
dragon_gsbi12_i2c_pins: gsbi12_i2c {
mux {
pins = "gpio115", "gpio116";
@ -448,6 +461,42 @@
};
};
gsbi@19800000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C>;
i2c@19880000 {
status = "ok";
pinctrl-names = "default";
pinctrl-0 = <&dragon_gsbi8_i2c_pins>;
eeprom@52 {
/* A 16KiB Platform ID EEPROM on the CPU carrier board */
compatible = "atmel,24c128";
reg = <0x52>;
vcc-supply = <&pm8058_s3>;
pagesize = <64>;
};
wm8903: wm8903@1a {
/* This Woolfson Micro device has an unrouted interrupt line */
compatible = "wlf,wm8903";
reg = <0x1a>;
AVDD-supply = <&pm8058_l16>;
CPVDD-supply = <&pm8058_l16>;
DBVDD-supply = <&pm8058_s3>;
DCVDD-supply = <&pm8058_l0>;
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
};
};
};
gsbi@19c00000 {
status = "ok";
qcom,mode = <GSBI_PROT_I2C_UART>;