Second Round of Renesas ARM based SoC Board updates for v3.14

* r8a7791 (R-Car M2) based Koelsch board
   - Let Koelsch multiplatform boot with Koelsch DTB
   - Remove non-multiplatform DT reference support
   - Instantiate clkdevs for SCIF and CMT
   - Remove duplicate CCF initialization
   - Add Ether and DU support
 
 * r8a7790 (R-Car H2) based Lager board
   - Let Lager multiplatform boot with Lager DTB
   - Remove non-multiplatform DT reference support
   - Instantiate clkdevs for SCIF and CMT
   - Enable multiplaform kernel support
 
 * r8a7740 (R-Mobile A1) based Armadillo board
   - Set backlight enable GPIO
 
 * sh7374 (SH-Mobile AP4) based Mackerel board
   - Correct USBHS pinconf entry
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.14 (GNU/Linux)
 
 iQIcBAABAgAGBQJSuYxAAAoJENfPZGlqN0++WXMP/AqZTLlhesmvshRzkUnY8QD9
 4JerjSAq3Bsj0mD0ytbGg0Og4QhXf+121BjL4eV588cXxkN0CbywR+R38WZf+0xf
 xb3Rv3zKdaE5u9k9fZ0OUXHsRmP2VqnAfNb63gKAcfKIincHq+IVm6Easrw1hrFk
 CaXANiZiHw5fsNXbxq8OPd2NZ2i9ZIy8THilRmcj/LMUHhziEnVf5R9rDzKuF5FR
 1VXSK3TSRCRWlKMNTELX4NdeeGOjwElcZAD+jGFsfhoJBwi3wfpDFLuYjE9BYPUh
 hEwMi2eMmP25+cOO5BfXFCZMnSgl0V4OTAUJa434ftrMwim9K1spBxPmlZtu22BP
 lpsq/zj+CcbPbmGfsIU5qa1Ysbmu421B5ATldI4d9n2tkdGKsC+0AK0Mo9WMjGTb
 XenBPPVpwhtx08jeXG/IIKhpGTdpd+BELmFHYaK0ROvz6vJrCxRd+xULL0cVSjt4
 1XJcvkZI45tBeO5ROw87c5bDHSJBhxLduEfWVGNnBkh+OUcaS0ufa/qR/kHpsFIX
 8Kcq6HZmFxIAJqCnR43pxXn+TMKaNTGGLv1avtz9TLwYo1/Y3/+LWf7ab2nLdYbg
 2lHnowBW75Gr8yAdk67IrtZWXH58PEyJxR0HfoNLEH5xqOjbiQt77RgrSoMGXteR
 qpRsTh/yVj6HFgJInObY
 =WXIZ
 -----END PGP SIGNATURE-----

Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Second Round of Renesas ARM based SoC Board updates for v3.14

* r8a7791 (R-Car M2) based Koelsch board
  - Let Koelsch multiplatform boot with Koelsch DTB
  - Remove non-multiplatform DT reference support
  - Instantiate clkdevs for SCIF and CMT
  - Remove duplicate CCF initialization
  - Add Ether and DU support

* r8a7790 (R-Car H2) based Lager board
  - Let Lager multiplatform boot with Lager DTB
  - Remove non-multiplatform DT reference support
  - Instantiate clkdevs for SCIF and CMT
  - Enable multiplaform kernel support

* r8a7740 (R-Mobile A1) based Armadillo board
  - Set backlight enable GPIO

* sh7374 (SH-Mobile AP4) based Mackerel board
  - Correct USBHS pinconf entry

* tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits)
  ARM: shmobile: mackerel: Fix USBHS pinconf entry
  ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB
  ARM: shmobile: Let Lager multiplatform boot with Lager DTB
  ARM: shmobile: Remove non-multiplatform Koelsch reference support
  ARM: shmobile: Remove non-multiplatform Lager reference support
  ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT
  ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT
  ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization
  ARM: shmobile: lager-reference: Enable multiplaform kernel support
  ARM: shmobile: armadillo: Set backlight enable GPIO
  ARM: shmobile: Koelsch: add Ether support
  ARM: shmobile: koelsch: Add DU device
  arm: shmobile: clks: remove duplicated clock from r7s72100
  ARM: shmobile: koelsch: Conditionally select MICREL_PHY
  ARM: shmobile: rcar-gen2: Initialize CCF before clock sources
  ARM: shmobile: r8a7791: Add clock index macros for DT sources
  ARM: shmobile: r8a7790: Add clock index macros for DT sources
  ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
  ARM: shmobile: r8a7778: add USB Func DMAEngine support
  ARM: rcar-gen2: Do not setup timer in non-secure mode
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/Makefile

@@ -233,7 +233,6 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
 	r8a7779-marzen-reference.dtb \
 	r8a7791-koelsch.dtb \
 	r8a7790-lager.dtb \
-	r8a7790-lager-reference.dtb \
 	sh73a0-kzm9g.dtb \
 	sh73a0-kzm9g-reference.dtb \
 	r8a73a4-ape6evm.dtb \
@@ -241,7 +240,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += emev2-kzm9d.dtb \
 	sh7372-mackerel.dtb
 dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
 	r7s72100-genmai-reference.dtb \
-	r8a7791-koelsch-reference.dtb
+	r8a7791-koelsch.dtb \
+	r8a7790-lager.dtb
 dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
 	socfpga_cyclone5_socdk.dtb \
 	socfpga_cyclone5_sockit.dtb \

arch/arm/mach-shmobile/Kconfig

@@ -12,6 +12,7 @@ config ARCH_SHMOBILE_MULTI
 	select HAVE_SMP
 	select ARM_GIC
 	select MIGHT_HAVE_CACHE_L2X0
+	select MIGHT_HAVE_PCI
 	select NO_IOPORT
 	select PINCTRL
 	select ARCH_REQUIRE_GPIOLIB
@@ -27,6 +28,10 @@ config ARCH_EMEV2
 config ARCH_R7S72100
 	bool "RZ/A1H (R7S72100)"
 
+config ARCH_R8A7790
+	bool "R-Car H2 (R8A77900)"
+	select RENESAS_IRQC
+
 config ARCH_R8A7791
 	bool "R-Car M2 (R8A77910)"
 	select RENESAS_IRQC
@@ -46,6 +51,10 @@ config MACH_KZM9D
 	depends on ARCH_EMEV2
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
 
+config MACH_LAGER
+	bool "Lager board"
+	depends on ARCH_R8A7790
+
 comment "Renesas ARM SoCs System Configuration"
 endif
 
@@ -111,6 +120,7 @@ config ARCH_R8A7790
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -119,6 +129,7 @@ config ARCH_R8A7791
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select SH_CLK_CPG
 	select RENESAS_IRQC
 
@@ -127,6 +138,7 @@ config ARCH_EMEV2
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select ARM_GIC
 	select CPU_V7
+	select MIGHT_HAVE_PCI
 	select USE_OF
 	select AUTO_ZRELADDR
 
@@ -250,32 +262,11 @@ config MACH_LAGER
 	depends on ARCH_R8A7790
 	select USE_OF
 
-config MACH_LAGER_REFERENCE
-	bool "Lager board - Reference Device Tree Implementation"
-	depends on ARCH_R8A7790
-	select USE_OF
-	---help---
-	   Use reference implementation of Lager board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
-
 config MACH_KOELSCH
 	bool "Koelsch board"
 	depends on ARCH_R8A7791
 	select USE_OF
-
+	select MICREL_PHY if SH_ETH
-config MACH_KOELSCH_REFERENCE
-	bool "Koelsch board - Reference Device Tree Implementation"
-	depends on ARCH_R8A7791
-	select USE_OF
-	---help---
-	   Use reference implementation of Koelsch board support
-	   which makes use of device tree at the expense
-	   of not supporting a number of devices.
-
-	   This is intended to aid developers
 
 config MACH_KZM9G
 	bool "KZM-A9-GT board"

arch/arm/mach-shmobile/Makefile

@@ -59,6 +59,7 @@ ifdef CONFIG_ARCH_SHMOBILE_MULTI
 obj-$(CONFIG_MACH_GENMAI)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch-reference.o
 obj-$(CONFIG_MACH_KZM9D)	+= board-kzm9d-reference.o
+obj-$(CONFIG_MACH_LAGER)	+= board-lager-reference.o
 else
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_APE6EVM_REFERENCE)	+= board-ape6evm-reference.o
@@ -70,11 +71,9 @@ obj-$(CONFIG_MACH_GENMAI_REFERENCE)	+= board-genmai-reference.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
 obj-$(CONFIG_MACH_MARZEN_REFERENCE)	+= board-marzen-reference.o
 obj-$(CONFIG_MACH_LAGER)	+= board-lager.o
-obj-$(CONFIG_MACH_LAGER_REFERENCE)	+= board-lager-reference.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
 obj-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE)	+= board-armadillo800eva-reference.o
 obj-$(CONFIG_MACH_KOELSCH)	+= board-koelsch.o
-obj-$(CONFIG_MACH_KOELSCH_REFERENCE)	+= board-koelsch-reference.o
 obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 obj-$(CONFIG_MACH_KZM9G_REFERENCE)	+= board-kzm9g-reference.o
 endif

arch/arm/mach-shmobile/Makefile.boot

@@ -9,11 +9,9 @@ loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
 loadaddr-$(CONFIG_MACH_GENMAI) += 0x08008000
 loadaddr-$(CONFIG_MACH_GENMAI_REFERENCE) += 0x08008000
 loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
-loadaddr-$(CONFIG_MACH_KOELSCH_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
 loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
 loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
-loadaddr-$(CONFIG_MACH_LAGER_REFERENCE) += 0x40008000
 loadaddr-$(CONFIG_MACH_MACKEREL) += 0x40008000
 loadaddr-$(CONFIG_MACH_MARZEN) += 0x60008000
 loadaddr-$(CONFIG_MACH_MARZEN_REFERENCE) += 0x60008000

arch/arm/mach-shmobile/board-armadillo800eva.c

@@ -423,7 +423,7 @@ static struct platform_pwm_backlight_data pwm_backlight_data = {
 	.max_brightness = 255,
 	.dft_brightness = 255,
 	.pwm_period_ns = 33333, /* 30kHz */
-	.enable_gpio = -1,
+	.enable_gpio = 61,
 };
 
 static struct platform_device pwm_backlight_device = {
@@ -1203,9 +1203,6 @@ static void __init eva_init(void)
 	r8a7740_pinmux_init();
 	r8a7740_meram_workaround();
 
-	/* LCDC0 */
-	gpio_request_one(61, GPIOF_OUT_INIT_HIGH, NULL); /* LCDDON */
-
 	/* GETHER */
 	gpio_request_one(18, GPIOF_OUT_INIT_HIGH, NULL); /* PHY_RST */
 

arch/arm/mach-shmobile/board-bockw.c

@@ -25,6 +25,7 @@
 #include <linux/mmc/sh_mmcif.h>
 #include <linux/mtd/partitions.h>
 #include <linux/pinctrl/machine.h>
+#include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_data/usb-rcar-phy.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/fixed.h>

arch/arm/mach-shmobile/board-koelsch-reference.c

@@ -19,7 +19,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
-#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/kernel.h>
 #include <linux/of_platform.h>
 #include <mach/common.h>
@@ -30,7 +31,31 @@
 static void __init koelsch_add_standard_devices(void)
 {
 #ifdef CONFIG_COMMON_CLK
-	of_clk_init(NULL);
+	/*
+	 * This is a really crude hack to provide clkdev support to the SCIF
+	 * and CMT devices until they get moved to DT.
+	 */
+	static const char * const scif_names[] = {
+		"scifa0", "scifa1", "scifb0", "scifb1", "scifb2", "scifa2",
+		"scif0", "scif1", "scif2", "scif3", "scif4", "scif5", "scifa3",
+		"scifa4", "scifa5",
+	};
+	struct clk *clk;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
+		clk = clk_get(NULL, scif_names[i]);
+		if (clk) {
+			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+			clk_put(clk);
+		}
+	}
+
+	clk = clk_get(NULL, "cmt0");
+	if (clk) {
+		clk_register_clkdev(clk, NULL, "sh_cmt.0");
+		clk_put(clk);
+	}
 #else
 	r8a7791_clock_init();
 #endif
@@ -39,6 +64,7 @@ static void __init koelsch_add_standard_devices(void)
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {
+	"renesas,koelsch",
 	"renesas,koelsch-reference",
 	NULL,
 };

arch/arm/mach-shmobile/board-koelsch.c

@@ -19,20 +19,89 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/kernel.h>
 #include <linux/leds.h>
+#include <linux/phy.h>
 #include <linux/pinctrl/machine.h>
 #include <linux/platform_data/gpio-rcar.h>
+#include <linux/platform_data/rcar-du.h>
 #include <linux/platform_device.h>
+#include <linux/sh_eth.h>
 #include <mach/common.h>
+#include <mach/irqs.h>
 #include <mach/r8a7791.h>
 #include <mach/rcar-gen2.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
+/* DU */
+static struct rcar_du_encoder_data koelsch_du_encoders[] = {
+	{
+		.type = RCAR_DU_ENCODER_NONE,
+		.output = RCAR_DU_OUTPUT_LVDS0,
+		.connector.lvds.panel = {
+			.width_mm = 210,
+			.height_mm = 158,
+			.mode = {
+				.clock = 65000,
+				.hdisplay = 1024,
+				.hsync_start = 1048,
+				.hsync_end = 1184,
+				.htotal = 1344,
+				.vdisplay = 768,
+				.vsync_start = 771,
+				.vsync_end = 777,
+				.vtotal = 806,
+				.flags = 0,
+			},
+		},
+	},
+};
+
+static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
+	.encoders = koelsch_du_encoders,
+	.num_encoders = ARRAY_SIZE(koelsch_du_encoders),
+};
+
+static const struct resource du_resources[] __initconst = {
+	DEFINE_RES_MEM(0xfeb00000, 0x40000),
+	DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
+	DEFINE_RES_IRQ(gic_spi(256)),
+	DEFINE_RES_IRQ(gic_spi(268)),
+};
+
+static void __init koelsch_add_du_device(void)
+{
+	struct platform_device_info info = {
+		.name = "rcar-du-r8a7791",
+		.id = -1,
+		.res = du_resources,
+		.num_res = ARRAY_SIZE(du_resources),
+		.data = &koelsch_du_pdata,
+		.size_data = sizeof(koelsch_du_pdata),
+		.dma_mask = DMA_BIT_MASK(32),
+	};
+
+	platform_device_register_full(&info);
+}
+
+/* Ether */
+static const struct sh_eth_plat_data ether_pdata __initconst = {
+	.phy			= 0x1,
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.phy_interface		= PHY_INTERFACE_MODE_RMII,
+	.ether_link_active_low	= 1,
+};
+
+static const struct resource ether_resources[] __initconst = {
+	DEFINE_RES_MEM(0xee700000, 0x400),
+	DEFINE_RES_IRQ(gic_spi(162)),
+};
+
 /* LEDS */
 static struct gpio_led koelsch_leds[] = {
 	{
@@ -80,6 +149,22 @@ static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
 };
 
 static const struct pinctrl_map koelsch_pinctrl_map[] = {
+	/* DU */
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+				  "du_rgb666", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+				  "du_sync", "du"),
+	PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
+				  "du_clk_out_0", "du"),
+	/* Ether */
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+				  "eth_link", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+				  "eth_mdio", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+				  "eth_rmii", "eth"),
+	PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
+				  "intc_irq0", "intc"),
 	/* SCIF0 (CN19: DEBUG SERIAL0) */
 	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
 				  "scif0_data_d", "scif0"),
@@ -95,12 +180,44 @@ static void __init koelsch_add_standard_devices(void)
 				  ARRAY_SIZE(koelsch_pinctrl_map));
 	r8a7791_pinmux_init();
 	r8a7791_add_standard_devices();
+	platform_device_register_resndata(&platform_bus, "r8a7791-ether", -1,
+					  ether_resources,
+					  ARRAY_SIZE(ether_resources),
+					  &ether_pdata, sizeof(ether_pdata));
 	platform_device_register_data(&platform_bus, "leds-gpio", -1,
 				      &koelsch_leds_pdata,
 				      sizeof(koelsch_leds_pdata));
 	platform_device_register_data(&platform_bus, "gpio-keys", -1,
 				      &koelsch_keys_pdata,
 				      sizeof(koelsch_keys_pdata));
+
+	koelsch_add_du_device();
+}
+
+/*
+ * Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds
+ * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
+ * 14-15. We have to set them back to 01 from the default 00 value each time
+ * the PHY is reset. It's also important because the PHY's LED0 signal is
+ * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
+ * bounce on and off after each packet, which we apparently want to avoid.
+ */
+static int koelsch_ksz8041_fixup(struct phy_device *phydev)
+{
+	u16 phyctrl1 = phy_read(phydev, 0x1e);
+
+	phyctrl1 &= ~0xc000;
+	phyctrl1 |= 0x4000;
+	return phy_write(phydev, 0x1e, phyctrl1);
+}
+
+static void __init koelsch_init(void)
+{
+	koelsch_add_standard_devices();
+
+	if (IS_ENABLED(CONFIG_PHYLIB))
+		phy_register_fixup_for_id("r8a7791-ether-ff:01",
+					  koelsch_ksz8041_fixup);
 }
 
 static const char * const koelsch_boards_compat_dt[] __initconst = {
@@ -112,7 +229,7 @@ DT_MACHINE_START(KOELSCH_DT, "koelsch")
 	.smp		= smp_ops(r8a7791_smp_ops),
 	.init_early	= r8a7791_init_early,
 	.init_time	= rcar_gen2_timer_init,
-	.init_machine	= koelsch_add_standard_devices,
+	.init_machine	= koelsch_init,
 	.init_late	= shmobile_init_late,
 	.dt_compat	= koelsch_boards_compat_dt,
 MACHINE_END

arch/arm/mach-shmobile/board-lager-reference.c

@@ -18,6 +18,8 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/clk.h>
+#include <linux/clkdev.h>
 #include <linux/init.h>
 #include <linux/of_platform.h>
 #include <mach/common.h>
@@ -27,12 +29,42 @@
 
 static void __init lager_add_standard_devices(void)
 {
+#ifdef CONFIG_COMMON_CLK
+	/*
+	 * This is a really crude hack to provide clkdev support to the SCIF
+	 * and CMT devices until they get moved to DT.
+	 */
+	static const char * const scif_names[] = {
+		"scifa0", "scifa1", "scifb0", "scifb1",
+		"scifb2", "scifa2", "scif0", "scif1",
+		"hscif0", "hscif1",
+	};
+	struct clk *clk;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(scif_names); ++i) {
+		clk = clk_get(NULL, scif_names[i]);
+		if (clk) {
+			clk_register_clkdev(clk, NULL, "sh-sci.%u", i);
+			clk_put(clk);
+		}
+	}
+
+	clk = clk_get(NULL, "cmt0");
+	if (clk) {
+		clk_register_clkdev(clk, NULL, "sh_cmt.0");
+		clk_put(clk);
+	}
+#else
 	r8a7790_clock_init();
+#endif
+
 	r8a7790_add_dt_devices();
 	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 }
 
 static const char *lager_boards_compat_dt[] __initdata = {
+	"renesas,lager",
 	"renesas,lager-reference",
 	NULL,
 };

arch/arm/mach-shmobile/board-mackerel.c

@@ -1406,7 +1406,7 @@ static const struct pinctrl_map mackerel_pinctrl_map[] = {
 	/* USBHS1 */
 	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
 				  "usb1_vbus", "usb1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.&", "pfc-sh7372",
+	PIN_MAP_CONFIGS_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
 				      "usb1_vbus", pin_pulldown_conf),
 	PIN_MAP_MUX_GROUP_DEFAULT("renesas_usbhs.1", "pfc-sh7372",
 				  "usb1_otg_id_0", "usb1"),

arch/arm/mach-shmobile/clock-r7s72100.c

@@ -181,7 +181,6 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.5", &mstp_clks[MSTP42]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.6", &mstp_clks[MSTP41]),
 	CLKDEV_ICK_ID("sci_fck", "sh-sci.7", &mstp_clks[MSTP40]),
-	CLKDEV_CON_ID("mtu2_fck", &mstp_clks[MSTP33]),
 };
 
 void __init r7s72100_clock_init(void)

arch/arm/mach-shmobile/clock-r8a7790.c

@@ -292,9 +292,13 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP717]),
 	CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP716]),
 	CLKDEV_DEV_ID("e6508000.i2c", &mstp_clks[MSTP931]),
+	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP931]),
 	CLKDEV_DEV_ID("e6518000.i2c", &mstp_clks[MSTP930]),
+	CLKDEV_DEV_ID("i2c-rcar.1", &mstp_clks[MSTP930]),
 	CLKDEV_DEV_ID("e6530000.i2c", &mstp_clks[MSTP929]),
+	CLKDEV_DEV_ID("i2c-rcar.2", &mstp_clks[MSTP929]),
 	CLKDEV_DEV_ID("e6540000.i2c", &mstp_clks[MSTP928]),
+	CLKDEV_DEV_ID("i2c-rcar.3", &mstp_clks[MSTP928]),
 	CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]),
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),

arch/arm/mach-shmobile/clock-r8a7791.c

@@ -122,6 +122,7 @@ static struct clk *main_clks[] = {
 
 /* MSTP */
 enum {
+	MSTP813,
 	MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
 	MSTP719, MSTP718, MSTP715, MSTP714,
 	MSTP522,
@@ -132,6 +133,7 @@ enum {
 };
 
 static struct clk mstp_clks[MSTP_NR] = {
+	[MSTP813] = SH_CLK_MSTP32(&p_clk, SMSTPCR8, 13, 0), /* Ether */
 	[MSTP726] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 26, 0), /* LVDS0 */
 	[MSTP724] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 24, 0), /* DU0 */
 	[MSTP723] = SH_CLK_MSTP32(&zx_clk, SMSTPCR7, 23, 0), /* DU1 */
@@ -192,6 +194,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]),
 	CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]),
 	CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
+	CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
 };
 
 #define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31)		\

arch/arm/mach-shmobile/clock-sh73a0.c

@@ -652,6 +652,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP331]), /* SCIFA6 */
 	CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
 	CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI */
+	CLKDEV_DEV_ID("ec230000.sound", &mstp_clks[MSTP328]), /* FSI */
 	CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
 	CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
 	CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */

arch/arm/mach-shmobile/include/mach/r8a7778.h

@@ -20,13 +20,30 @@
 #define __ASM_R8A7778_H__
 
 #include <linux/sh_eth.h>
-#include <linux/platform_data/camera-rcar.h>
 
 /* HPB-DMA slave IDs */
 enum {
 	HPBDMA_SLAVE_DUMMY,
 	HPBDMA_SLAVE_SDHI0_TX,
 	HPBDMA_SLAVE_SDHI0_RX,
+	HPBDMA_SLAVE_SSI0_TX,
+	HPBDMA_SLAVE_SSI0_RX,
+	HPBDMA_SLAVE_SSI1_TX,
+	HPBDMA_SLAVE_SSI1_RX,
+	HPBDMA_SLAVE_SSI2_TX,
+	HPBDMA_SLAVE_SSI2_RX,
+	HPBDMA_SLAVE_SSI3_TX,
+	HPBDMA_SLAVE_SSI3_RX,
+	HPBDMA_SLAVE_SSI4_TX,
+	HPBDMA_SLAVE_SSI4_RX,
+	HPBDMA_SLAVE_SSI5_TX,
+	HPBDMA_SLAVE_SSI5_RX,
+	HPBDMA_SLAVE_SSI6_TX,
+	HPBDMA_SLAVE_SSI6_RX,
+	HPBDMA_SLAVE_SSI7_TX,
+	HPBDMA_SLAVE_SSI7_RX,
+	HPBDMA_SLAVE_SSI8_TX,
+	HPBDMA_SLAVE_SSI8_RX,
 	HPBDMA_SLAVE_HPBIF0_TX,
 	HPBDMA_SLAVE_HPBIF0_RX,
 	HPBDMA_SLAVE_HPBIF1_TX,
@@ -45,6 +62,8 @@ enum {
 	HPBDMA_SLAVE_HPBIF7_RX,
 	HPBDMA_SLAVE_HPBIF8_TX,
 	HPBDMA_SLAVE_HPBIF8_RX,
+	HPBDMA_SLAVE_USBFUNC_TX,
+	HPBDMA_SLAVE_USBFUNC_RX,
 };
 
 extern void r8a7778_add_standard_devices(void);

arch/arm/mach-shmobile/setup-r8a7778.c

@@ -319,6 +319,29 @@ void __init r8a7778_add_dt_devices(void)
 #define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE	BIT(1)	/* SDHI0 */
 #define HPB_DMAE_ASYNCMDR_ASMD21_MULTI	0	/* SDHI0 */
 
+#define HPBDMA_SSI(_id)				\
+{						\
+	.id	= HPBDMA_SLAVE_SSI## _id ##_TX,	\
+	.addr	= 0xffd91008 + (_id * 0x40),	\
+	.dcr	= HPB_DMAE_DCR_CT |		\
+		  HPB_DMAE_DCR_DIP |		\
+		  HPB_DMAE_DCR_SPDS_32BIT |	\
+		  HPB_DMAE_DCR_DMDL |		\
+		  HPB_DMAE_DCR_DPDS_32BIT,	\
+	.port   = _id + (_id << 8),		\
+	.dma_ch = (28 + _id),			\
+}, {						\
+	.id	= HPBDMA_SLAVE_SSI## _id ##_RX,	\
+	.addr	= 0xffd9100c + (_id * 0x40),	\
+	.dcr	= HPB_DMAE_DCR_CT |		\
+		  HPB_DMAE_DCR_DIP |		\
+		  HPB_DMAE_DCR_SMDL |		\
+		  HPB_DMAE_DCR_SPDS_32BIT |	\
+		  HPB_DMAE_DCR_DPDS_32BIT,	\
+	.port   = _id + (_id << 8),		\
+	.dma_ch = (28 + _id),			\
+}
+
 #define HPBDMA_HPBIF(_id)				\
 {							\
 	.id	= HPBDMA_SLAVE_HPBIF## _id ##_TX,	\
@@ -371,8 +394,34 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 		.port	= 0x0D0C,
 		.flags	= HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
 		.dma_ch	= 22,
+	}, {
+		.id	= HPBDMA_SLAVE_USBFUNC_TX, /* for D0 */
+		.addr	= 0xffe60018,
+		.dcr	= HPB_DMAE_DCR_SPDS_32BIT |
+			  HPB_DMAE_DCR_DMDL |
+			  HPB_DMAE_DCR_DPDS_32BIT,
+		.port	= 0x0000,
+		.dma_ch	= 14,
+	}, {
+		.id	= HPBDMA_SLAVE_USBFUNC_RX, /* for D1 */
+		.addr	= 0xffe6001c,
+		.dcr	= HPB_DMAE_DCR_SMDL |
+			  HPB_DMAE_DCR_SPDS_32BIT |
+			  HPB_DMAE_DCR_DPDS_32BIT,
+		.port	= 0x0101,
+		.dma_ch	= 15,
 	},
 
+	HPBDMA_SSI(0),
+	HPBDMA_SSI(1),
+	HPBDMA_SSI(2),
+	HPBDMA_SSI(3),
+	HPBDMA_SSI(4),
+	HPBDMA_SSI(5),
+	HPBDMA_SSI(6),
+	HPBDMA_SSI(7),
+	HPBDMA_SSI(8),
+
 	HPBDMA_HPBIF(0),
 	HPBDMA_HPBIF(1),
 	HPBDMA_HPBIF(2),
@@ -385,24 +434,44 @@ static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
 };
 
 static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_TX), /* ch. 14 */
+	HPB_DMAE_CHANNEL(0x7c, HPBDMA_SLAVE_USBFUNC_RX), /* ch. 15 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
 	HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_TX),   /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI0_RX),   /* ch. 28 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_TX), /* ch. 28 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF0_RX), /* ch. 28 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_TX),   /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI1_RX),   /* ch. 29 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_TX), /* ch. 29 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF1_RX), /* ch. 29 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_TX),   /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI2_RX),   /* ch. 30 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_TX), /* ch. 30 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF2_RX), /* ch. 30 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_TX),   /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI3_RX),   /* ch. 31 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_TX), /* ch. 31 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF3_RX), /* ch. 31 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_TX),   /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI4_RX),   /* ch. 32 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_TX), /* ch. 32 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF4_RX), /* ch. 32 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_TX),   /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI5_RX),   /* ch. 33 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_TX), /* ch. 33 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF5_RX), /* ch. 33 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_TX),   /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI6_RX),   /* ch. 34 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_TX), /* ch. 34 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF6_RX), /* ch. 34 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_TX),   /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI7_RX),   /* ch. 35 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_TX), /* ch. 35 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF7_RX), /* ch. 35 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_TX),   /* ch. 36 */
+	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_SSI8_RX),   /* ch. 36 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_TX), /* ch. 36 */
 	HPB_DMAE_CHANNEL(0x7f, HPBDMA_SLAVE_HPBIF8_RX), /* ch. 36 */
 };

arch/arm/mach-shmobile/setup-r8a7790.c

@@ -67,6 +67,27 @@ R8A7790_GPIO(5);
 		&r8a7790_gpio##idx##_platform_data,			\
 		sizeof(r8a7790_gpio##idx##_platform_data))
 
+static struct resource i2c_resources[] __initdata = {
+	/* I2C0 */
+	DEFINE_RES_MEM(0xE6508000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(287)),
+	/* I2C1 */
+	DEFINE_RES_MEM(0xE6518000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(288)),
+	/* I2C2 */
+	DEFINE_RES_MEM(0xE6530000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(286)),
+	/* I2C3 */
+	DEFINE_RES_MEM(0xE6540000, 0x40),
+	DEFINE_RES_IRQ(gic_spi(290)),
+
+};
+
+#define r8a7790_register_i2c(idx)		\
+	platform_device_register_simple(	\
+		"i2c-rcar", idx,		\
+		i2c_resources + (2 * idx), 2);	\
+
 void __init r8a7790_pinmux_init(void)
 {
 	r8a7790_register_pfc();
@@ -76,6 +97,10 @@ void __init r8a7790_pinmux_init(void)
 	r8a7790_register_gpio(3);
 	r8a7790_register_gpio(4);
 	r8a7790_register_gpio(5);
+	r8a7790_register_i2c(0);
+	r8a7790_register_i2c(1);
+	r8a7790_register_i2c(2);
+	r8a7790_register_i2c(3);
 }
 
 #define SCIF_COMMON(scif_type, baseaddr, irq)			\

arch/arm/mach-shmobile/setup-rcar-gen2.c

@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 
+#include <linux/clk/shmobile.h>
 #include <linux/clocksource.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
@@ -44,8 +45,10 @@ u32 __init rcar_gen2_read_mode_pins(void)
 
 void __init rcar_gen2_timer_init(void)
 {
-#ifdef CONFIG_ARM_ARCH_TIMER
+#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
 	u32 mode = rcar_gen2_read_mode_pins();
+#endif
+#ifdef CONFIG_ARM_ARCH_TIMER
 	void __iomem *base;
 	int extal_mhz = 0;
 	u32 freq;
@@ -78,14 +81,28 @@ void __init rcar_gen2_timer_init(void)
 	/* Remap "armgcnt address map" space */
 	base = ioremap(0xe6080000, PAGE_SIZE);
 
-	/* Update registers with correct frequency */
+	/*
-	iowrite32(freq, base + CNTFID0);
+	 * Update the timer if it is either not running, or is not at the
-	asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+	 * right frequency. The timer is only configurable in secure mode
+	 * so this avoids an abort if the loader started the timer and
+	 * entered the kernel in non-secure mode.
+	 */
+
+	if ((ioread32(base + CNTCR) & 1) == 0 ||
+	    ioread32(base + CNTFID0) != freq) {
+		/* Update registers with correct frequency */
+		iowrite32(freq, base + CNTFID0);
+		asm volatile("mcr p15, 0, %0, c14, c0, 0" : : "r" (freq));
+
+		/* make sure arch timer is started by setting bit 0 of CNTCR */
+		iowrite32(1, base + CNTCR);
+	}
 
-	/* make sure arch timer is started by setting bit 0 of CNTCR */
-	iowrite32(1, base + CNTCR);
 	iounmap(base);
 #endif /* CONFIG_ARM_ARCH_TIMER */
 
+#ifdef CONFIG_COMMON_CLK
+	rcar_gen2_clocks_init(mode);
+#endif
 	clocksource_of_init();
 }

include/dt-bindings/clock/r8a7790-clock.h

@@ -0,0 +1,100 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7790_H__
+#define __DT_BINDINGS_CLOCK_R8A7790_H__
+
+/* CPG */
+#define R8A7790_CLK_MAIN		0
+#define R8A7790_CLK_PLL0		1
+#define R8A7790_CLK_PLL1		2
+#define R8A7790_CLK_PLL3		3
+#define R8A7790_CLK_LB			4
+#define R8A7790_CLK_QSPI		5
+#define R8A7790_CLK_SDH			6
+#define R8A7790_CLK_SD0			7
+#define R8A7790_CLK_SD1			8
+#define R8A7790_CLK_Z			9
+
+/* MSTP1 */
+#define R8A7790_CLK_TMU1		11
+#define R8A7790_CLK_TMU3		21
+#define R8A7790_CLK_TMU2		22
+#define R8A7790_CLK_CMT0		24
+#define R8A7790_CLK_TMU0		25
+#define R8A7790_CLK_VSP1_DU1		27
+#define R8A7790_CLK_VSP1_DU0		28
+#define R8A7790_CLK_VSP1_RT		30
+#define R8A7790_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7790_CLK_SCIFA2		2
+#define R8A7790_CLK_SCIFA1		3
+#define R8A7790_CLK_SCIFA0		4
+#define R8A7790_CLK_SCIFB0		6
+#define R8A7790_CLK_SCIFB1		7
+#define R8A7790_CLK_SCIFB2		16
+#define R8A7790_CLK_SYS_DMAC0		18
+#define R8A7790_CLK_SYS_DMAC1		19
+
+/* MSTP3 */
+#define R8A7790_CLK_TPU0		4
+#define R8A7790_CLK_MMCIF1		5
+#define R8A7790_CLK_SDHI3		11
+#define R8A7790_CLK_SDHI2		12
+#define R8A7790_CLK_SDHI1		13
+#define R8A7790_CLK_SDHI0		14
+#define R8A7790_CLK_MMCIF0		15
+#define R8A7790_CLK_SSUSB		28
+#define R8A7790_CLK_CMT1		29
+#define R8A7790_CLK_USBDMAC0		30
+#define R8A7790_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7790_CLK_THERMAL		22
+#define R8A7790_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7790_CLK_EHCI		3
+#define R8A7790_CLK_HSUSB		4
+#define R8A7790_CLK_HSCIF1		16
+#define R8A7790_CLK_HSCIF0		17
+#define R8A7790_CLK_SCIF1		20
+#define R8A7790_CLK_SCIF0		21
+#define R8A7790_CLK_DU2			22
+#define R8A7790_CLK_DU1			23
+#define R8A7790_CLK_DU0			24
+#define R8A7790_CLK_LVDS1		25
+#define R8A7790_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7790_CLK_VIN3		8
+#define R8A7790_CLK_VIN2		9
+#define R8A7790_CLK_VIN1		10
+#define R8A7790_CLK_VIN0		11
+#define R8A7790_CLK_ETHER		13
+#define R8A7790_CLK_SATA1		14
+#define R8A7790_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7790_CLK_GPIO5		7
+#define R8A7790_CLK_GPIO4		8
+#define R8A7790_CLK_GPIO3		9
+#define R8A7790_CLK_GPIO2		10
+#define R8A7790_CLK_GPIO1		11
+#define R8A7790_CLK_GPIO0		12
+#define R8A7790_CLK_RCAN1		15
+#define R8A7790_CLK_RCAN0		16
+#define R8A7790_CLK_IICDVFS		26
+#define R8A7790_CLK_I2C3		28
+#define R8A7790_CLK_I2C2		29
+#define R8A7790_CLK_I2C1		30
+#define R8A7790_CLK_I2C0		31
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7790_H__ */

include/dt-bindings/clock/r8a7791-clock.h

@@ -0,0 +1,105 @@
+/*
+ * Copyright 2013 Ideas On Board SPRL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R8A7791_H__
+#define __DT_BINDINGS_CLOCK_R8A7791_H__
+
+/* CPG */
+#define R8A7791_CLK_MAIN		0
+#define R8A7791_CLK_PLL0		1
+#define R8A7791_CLK_PLL1		2
+#define R8A7791_CLK_PLL3		3
+#define R8A7791_CLK_LB			4
+#define R8A7791_CLK_QSPI		5
+#define R8A7791_CLK_SDH			6
+#define R8A7791_CLK_SD0			7
+#define R8A7791_CLK_Z			8
+
+/* MSTP1 */
+#define R8A7791_CLK_TMU1		11
+#define R8A7791_CLK_TMU3		21
+#define R8A7791_CLK_TMU2		22
+#define R8A7791_CLK_CMT0		24
+#define R8A7791_CLK_TMU0		25
+#define R8A7791_CLK_VSP1_DU1		27
+#define R8A7791_CLK_VSP1_DU0		28
+#define R8A7791_CLK_VSP1_SY		31
+
+/* MSTP2 */
+#define R8A7791_CLK_SCIFA2		2
+#define R8A7791_CLK_SCIFA1		3
+#define R8A7791_CLK_SCIFA0		4
+#define R8A7791_CLK_SCIFB0		6
+#define R8A7791_CLK_SCIFB1		7
+#define R8A7791_CLK_SCIFB2		16
+#define R8A7791_CLK_DMAC		18
+
+/* MSTP3 */
+#define R8A7791_CLK_TPU0		4
+#define R8A7791_CLK_SDHI2		11
+#define R8A7791_CLK_SDHI1		12
+#define R8A7791_CLK_SDHI0		14
+#define R8A7791_CLK_MMCIF0		15
+#define R8A7791_CLK_SSUSB		28
+#define R8A7791_CLK_CMT1		29
+#define R8A7791_CLK_USBDMAC0		30
+#define R8A7791_CLK_USBDMAC1		31
+
+/* MSTP5 */
+#define R8A7791_CLK_THERMAL		22
+#define R8A7791_CLK_PWM			23
+
+/* MSTP7 */
+#define R8A7791_CLK_HSUSB		4
+#define R8A7791_CLK_HSCIF2		13
+#define R8A7791_CLK_SCIF5		14
+#define R8A7791_CLK_SCIF4		15
+#define R8A7791_CLK_HSCIF1		16
+#define R8A7791_CLK_HSCIF0		17
+#define R8A7791_CLK_SCIF3		18
+#define R8A7791_CLK_SCIF2		19
+#define R8A7791_CLK_SCIF1		20
+#define R8A7791_CLK_SCIF0		21
+#define R8A7791_CLK_DU1			23
+#define R8A7791_CLK_DU0			24
+#define R8A7791_CLK_LVDS0		26
+
+/* MSTP8 */
+#define R8A7791_CLK_VIN2		9
+#define R8A7791_CLK_VIN1		10
+#define R8A7791_CLK_VIN0		11
+#define R8A7791_CLK_ETHER		13
+#define R8A7791_CLK_SATA1		14
+#define R8A7791_CLK_SATA0		15
+
+/* MSTP9 */
+#define R8A7791_CLK_GPIO7		4
+#define R8A7791_CLK_GPIO6		5
+#define R8A7791_CLK_GPIO5		7
+#define R8A7791_CLK_GPIO4		8
+#define R8A7791_CLK_GPIO3		9
+#define R8A7791_CLK_GPIO2		10
+#define R8A7791_CLK_GPIO1		11
+#define R8A7791_CLK_GPIO0		12
+#define R8A7791_CLK_RCAN1		15
+#define R8A7791_CLK_RCAN0		16
+#define R8A7791_CLK_I2C5		25
+#define R8A7791_CLK_IICDVFS		26
+#define R8A7791_CLK_I2C4		27
+#define R8A7791_CLK_I2C3		28
+#define R8A7791_CLK_I2C2		29
+#define R8A7791_CLK_I2C1		30
+#define R8A7791_CLK_I2C0		31
+
+/* MSTP11 */
+#define R8A7791_CLK_SCIFA3		6
+#define R8A7791_CLK_SCIFA4		7
+#define R8A7791_CLK_SCIFA5		8
+
+#endif /* __DT_BINDINGS_CLOCK_R8A7791_H__ */