e1000e: initialize manageability (IPMI) pass-through in 82574/82583

82574/82583 uses different registers/bits to setup manageability filters
than all other parts supported by e1000e; set them accordingly for IPMI
pass-through.  Rename the function to better reflect what it does.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Bruce Allan 2010-05-10 14:59:51 +00:00 committed by David S. Miller
parent 11b08be830
commit cd791618c2
3 changed files with 55 additions and 9 deletions

View File

@ -138,6 +138,11 @@
/* Enable MNG packets to host memory */
#define E1000_MANC_EN_MNG2HOST 0x00200000
#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */
#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */
#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */
#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */
/* Receive Control */
#define E1000_RCTL_EN 0x00000002 /* enable */
#define E1000_RCTL_SBP 0x00000004 /* store bad packet */

View File

@ -208,6 +208,8 @@ enum e1e_registers {
E1000_KMRNCTRLSTA = 0x00034, /* MAC-PHY interface - RW */
E1000_MANC2H = 0x05860, /* Management Control To Host - RW */
E1000_MDEF_BASE = 0x05890, /* Management Decision Filters */
#define E1000_MDEF(_n) (E1000_MDEF_BASE + ((_n) * 4))
E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */
E1000_GCR = 0x05B00, /* PCI-Ex Control */
E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */

View File

@ -2526,10 +2526,10 @@ static void e1000_restore_vlan(struct e1000_adapter *adapter)
}
}
static void e1000_init_manageability(struct e1000_adapter *adapter)
static void e1000_init_manageability_pt(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
u32 manc, manc2h;
u32 manc, manc2h, mdef, i, j;
if (!(adapter->flags & FLAG_MNG_PT_ENABLED))
return;
@ -2543,10 +2543,49 @@ static void e1000_init_manageability(struct e1000_adapter *adapter)
*/
manc |= E1000_MANC_EN_MNG2HOST;
manc2h = er32(MANC2H);
#define E1000_MNG2HOST_PORT_623 (1 << 5)
#define E1000_MNG2HOST_PORT_664 (1 << 6)
manc2h |= E1000_MNG2HOST_PORT_623;
manc2h |= E1000_MNG2HOST_PORT_664;
switch (hw->mac.type) {
default:
manc2h |= (E1000_MANC2H_PORT_623 | E1000_MANC2H_PORT_664);
break;
case e1000_82574:
case e1000_82583:
/*
* Check if IPMI pass-through decision filter already exists;
* if so, enable it.
*/
for (i = 0, j = 0; i < 8; i++) {
mdef = er32(MDEF(i));
/* Ignore filters with anything other than IPMI ports */
if (mdef & !(E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
continue;
/* Enable this decision filter in MANC2H */
if (mdef)
manc2h |= (1 << i);
j |= mdef;
}
if (j == (E1000_MDEF_PORT_623 | E1000_MDEF_PORT_664))
break;
/* Create new decision filter in an empty filter */
for (i = 0, j = 0; i < 8; i++)
if (er32(MDEF(i)) == 0) {
ew32(MDEF(i), (E1000_MDEF_PORT_623 |
E1000_MDEF_PORT_664));
manc2h |= (1 << 1);
j++;
break;
}
if (!j)
e_warn("Unable to create IPMI pass-through filter\n");
break;
}
ew32(MANC2H, manc2h);
ew32(MANC, manc);
}
@ -2961,7 +3000,7 @@ static void e1000_configure(struct e1000_adapter *adapter)
e1000_set_multi(adapter->netdev);
e1000_restore_vlan(adapter);
e1000_init_manageability(adapter);
e1000_init_manageability_pt(adapter);
e1000_configure_tx(adapter);
e1000_setup_rctl(adapter);
@ -5104,7 +5143,7 @@ static int __e1000_resume(struct pci_dev *pdev)
e1000e_reset(adapter);
e1000_init_manageability(adapter);
e1000_init_manageability_pt(adapter);
if (netif_running(netdev))
e1000e_up(adapter);
@ -5305,7 +5344,7 @@ static void e1000_io_resume(struct pci_dev *pdev)
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
e1000_init_manageability(adapter);
e1000_init_manageability_pt(adapter);
if (netif_running(netdev)) {
if (e1000e_up(adapter)) {