From cd10c74aeea76e60ec5ab15357266b76d8e50df1 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Mon, 5 Nov 2012 17:53:38 +0530 Subject: [PATCH] i2c: omap: remove the dtrev The dtrev is used only for the comments. Remove the same and use the scheme instead to know if it is version2. Signed-off-by: Shubhrajyoti D Reviewed-by: Felipe Balbi Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 7c409606f20c..0ca50e71731b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -192,7 +192,6 @@ struct omap_i2c_dev { void (*set_mpu_wkup_lat)(struct device *dev, long latency); u32 speed; /* Speed of bus in kHz */ - u32 dtrev; /* extra revision from DT */ u32 flags; u16 cmd_err; u8 *buf; @@ -1075,7 +1074,7 @@ omap_i2c_probe(struct platform_device *pdev) int irq; int r; u32 rev; - u16 minor, major; + u16 minor, major, scheme; /* NOTE: driver uses the static register mapping */ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1107,7 +1106,6 @@ omap_i2c_probe(struct platform_device *pdev) u32 freq = 100000; /* default to 100000 Hz */ pdata = match->data; - dev->dtrev = pdata->rev; dev->flags = pdata->flags; of_property_read_u32(node, "clock-frequency", &freq); @@ -1117,7 +1115,6 @@ omap_i2c_probe(struct platform_device *pdev) dev->speed = pdata->clkrate; dev->flags = pdata->flags; dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat; - dev->dtrev = pdata->rev; } dev->pins = devm_pinctrl_get_select_default(&pdev->dev); @@ -1156,7 +1153,8 @@ omap_i2c_probe(struct platform_device *pdev) */ rev = __raw_readw(dev->base + 0x04); - switch (OMAP_I2C_SCHEME(rev)) { + scheme = OMAP_I2C_SCHEME(rev); + switch (scheme) { case OMAP_I2C_SCHEME_0: dev->regs = (u8 *)reg_map_ip_v1; dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG); @@ -1241,8 +1239,8 @@ omap_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } - dev_info(dev->dev, "bus %d rev%d.%d.%d at %d kHz\n", adap->nr, - dev->dtrev, major, minor, dev->speed); + dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr, + major, minor, dev->speed); of_i2c_register_devices(adap);