From ccd3517faf18330c051068f07dd8ef79853238c7 Mon Sep 17 00:00:00 2001 From: Bjorn Andersson Date: Tue, 28 Jun 2022 21:14:37 -0700 Subject: [PATCH] arm64: dts: qcom: sc8280xp: Add reference device Add basic support for the SC8280XP reference device, which allows it to boot to a shell (using EFIFB) with functional storage (UFS), USB, keyboard, touchpad, touchscreen, backlight and remoteprocs. The PMICs are, per socinfo, reused from other platforms. But given that the address of the PMICs doesn't match other cases and that it's desirable to label things according to the schematics a new dtsi file is created to represent the reference combination of PMICs. Signed-off-by: Bjorn Andersson Reviewed-by: Johan Hovold Link: https://lore.kernel.org/r/20220629041438.1352536-5-bjorn.andersson@linaro.org --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 427 +++++++++++++++++++ arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi | 109 +++++ 3 files changed, 537 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index ca3fdfb74580..83ac313fc86d 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-villager-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-idp2.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7280-crd-r3.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-ganges-kirin.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts new file mode 100644 index 000000000000..45058ad0a1c8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Qualcomm SC8280XP CRD"; + compatible = "qcom,sc8280xp-crd", "qcom,sc8280xp"; + + aliases { + serial0 = &qup2_uart17; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pmc8280c_lpg 3 1000000>; + enable-gpios = <&pmc8280_1_gpios 8 GPIO_ACTIVE_HIGH>; + power-supply = <&vreg_edp_bl>; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vreg_edp_bl: regulator-edp-bl { + compatible = "regulator-fixed"; + + regulator-name = "VREG_EDP_BL"; + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + gpio = <&pmc8280_1_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&edp_bl_reg_en>; + + regulator-boot-on; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VREG_MISC_3P3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; +}; + +&apps_rsc { + pmc8280-1-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-l3-l5-supply = <&vreg_s11b>; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = ; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-boot-on; + regulator-always-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-boot-on; + }; + }; + + pmc8280c-rpmh-regulators { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + }; + + pmc8280-2-rpmh-regulators { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + }; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&qup0 { + status = "okay"; +}; + +&qup0_i2c4 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup0_i2c4_default>, <&ts0_default>; + + status = "okay"; + + touchscreen@10 { + compatible = "hid-over-i2c"; + reg = <0x10>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 175 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_i2c5 { + clock-frequency = <400000>; + + pinctrl-names = "default"; + pinctrl-0 = <&qup2_i2c5_default>, <&kybd_default>, <&tpad_default>; + + status = "okay"; + + touchpad@15 { + compatible = "hid-over-i2c"; + reg = <0x15>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 182 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; + + keyboard@68 { + compatible = "hid-over-i2c"; + reg = <0x68>; + hid-descr-addr = <0x1>; + interrupts-extended = <&tlmm 104 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&vreg_misc_3p3>; + }; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/qccdsp8280.mbn"; + + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l7c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3d>; + vccq-max-microamp = <900000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l6b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l9d>; + vdda-pll-supply = <&vreg_l4d>; + + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l4b>; + vdda-pll-supply = <&vreg_l3b>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL - additions to nodes defined in sc8280xp.dtsi */ + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <74 6>, <83 4>, <125 2>, <128 2>, <154 7>; + + kybd_default: kybd-default-state { + disable { + pins = "gpio102"; + function = "gpio"; + output-low; + }; + + int-n { + pins = "gpio104"; + function = "gpio"; + bias-disable; + }; + + reset { + pins = "gpio105"; + function = "gpio"; + bias-disable; + }; + }; + + qup0_i2c4_default: qup0-i2c4-default-state { + pins = "gpio171", "gpio172"; + function = "qup4"; + + bias-disable; + drive-strength = <16>; + }; + + qup2_i2c5_default: qup2-i2c5-default-state { + pins = "gpio81", "gpio82"; + function = "qup21"; + + bias-disable; + drive-strength = <16>; + }; + + tpad_default: tpad-default-state { + int-n { + pins = "gpio182"; + function = "gpio"; + bias-disable; + }; + }; + + ts0_default: ts0-default-state { + int-n { + pins = "gpio175"; + function = "gpio"; + bias-pull-up; + }; + + reset-n { + pins = "gpio99"; + function = "gpio"; + output-high; + drive-strength = <16>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi new file mode 100644 index 000000000000..ae90b97aecb8 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-pmics.dtsi @@ -0,0 +1,109 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Linaro Limited + */ + +#include +#include +#include + +&spmi_bus { + pmk8280: pmic@0 { + compatible = "qcom,pmk8350", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmk8280_pon: pon@1300 { + compatible = "qcom,pm8998-pon"; + reg = <0x1300>; + + pmk8280_pon_pwrkey: pwrkey { + compatible = "qcom,pmk8350-pwrkey"; + interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>; + linux,code = ; + status = "disabled"; + }; + }; + }; + + pmc8280_1: pmic@1 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x1 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_1_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_1_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmc8280c: pmic@2 { + compatible = "qcom,pm8350c", "qcom,spmi-pmic"; + reg = <0x2 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280c_gpios: gpio@8800 { + compatible = "qcom,pm8350c-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280c_gpios 0 0 9>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pmc8280c_lpg: lpg@e800 { + compatible = "qcom,pm8350c-pwm"; + reg = <0xe800>; + + #address-cells = <1>; + #size-cells = <0>; + + #pwm-cells = <2>; + + status = "disabled"; + }; + }; + + pmc8280_2: pmic@3 { + compatible = "qcom,pm8350", "qcom,spmi-pmic"; + reg = <0x3 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmc8280_2_gpios: gpio@8800 { + compatible = "qcom,pm8350-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmc8280_2_gpios 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pmr735a: pmic@4 { + compatible = "qcom,pmr735a", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pmr735a_gpios: gpio@8800 { + compatible = "qcom,pmr735a-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmr735a_gpios 0 0 4>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +};