UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity

Merge branch 'next' into resolution 

Conflicts:
	drivers/extcon/extcon-adc-jack.c
	drivers/extcon/extcon-arizona.c
	drivers/extcon/extcon-gpio.c
	include/linux/extcon.h
This commit is contained in:
Kishon Vijay Abraham I 2016-09-15 15:46:11 +05:30
parent 8152263748 b78ea84a7d
commit cb9850d092
28 changed files with 2877 additions and 148 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

23
Documentation/devicetree/bindings/phy/bcm-ns-usb3-phy.txt Normal file
View File

@ -0,0 +1,23 @@
Driver for Broadcom Northstar USB 3.0 PHY
Required properties:
- compatible: one of: "brcm,ns-ax-usb3-phy", "brcm,ns-bx-usb3-phy".
- reg: register mappings for DMP (Device Management Plugin) and ChipCommon B
MMI.
- reg-names: "dmp" and "ccb-mii"
Initialization of USB 3.0 PHY depends on Northstar version. There are currently
three known series: Ax, Bx and Cx.
Known A0: BCM4707 rev 0
Known B0: BCM4707 rev 4, BCM53573 rev 2
Known B1: BCM4707 rev 6
Known C0: BCM47094 rev 0
Example:
usb3-phy {
compatible = "brcm,ns-ax-usb3-phy";
reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
reg-names = "dmp", "ccb-mii";
#phy-cells = <0>;
};

64
Documentation/devicetree/bindings/phy/phy-rockchip-inno-usb2.txt Normal file
View File

@ -0,0 +1,64 @@
ROCKCHIP USB2.0 PHY WITH INNO IP BLOCK
Required properties (phy (parent) node):
- compatible : should be one of the listed compatibles:
* "rockchip,rk3366-usb2phy"
* "rockchip,rk3399-usb2phy"
- reg : the address offset of grf for usb-phy configuration.
- #clock-cells : should be 0.
- clock-output-names : specify the 480m output clock name.
Optional properties:
- clocks : phandle + phy specifier pair, for the input clock of phy.
- clock-names : input clock name of phy, must be "phyclk".
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify host or otg port,
and shall be the following entries:
* "otg-port" : the name of otg port.
* "host-port" : the name of host port.
Required properties (port (child) node):
- #phy-cells : must be 0. See ./phy-bindings.txt for details.
- interrupts : specify an interrupt for each entry in interrupt-names.
- interrupt-names : a list which shall be the following entries:
* "otg-id" : for the otg id interrupt.
* "otg-bvalid" : for the otg vbus interrupt.
* "linestate" : for the host/otg linestate interrupt.
Optional properties:
- phy-supply : phandle to a regulator that provides power to VBUS.
See ./phy-bindings.txt for details.
Example:
grf: syscon@ff770000 {
compatible = "rockchip,rk3366-grf", "syscon", "simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
...
u2phy: usb2-phy@700 {
compatible = "rockchip,rk3366-usb2phy";
reg = <0x700 0x2c>;
#clock-cells = <0>;
clock-output-names = "sclk_otgphy0_480m";
u2phy_otg: otg-port {
#phy-cells = <0>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "otg-id", "otg-bvalid", "linestate";
status = "okay";
};
u2phy_host: host-port {
#phy-cells = <0>;
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "linestate";
status = "okay";
};
};
};

101
Documentation/devicetree/bindings/phy/phy-rockchip-typec.txt Normal file
View File

@ -0,0 +1,101 @@
* ROCKCHIP type-c PHY
---------------------
Required properties:
- compatible : must be "rockchip,rk3399-typec-phy"
- reg: Address and length of the usb phy control register set
- rockchip,grf : phandle to the syscon managing the "general
register files"
- clocks : phandle + clock specifier for the phy clocks
- clock-names : string, clock name, must be "tcpdcore", "tcpdphy-ref";
- assigned-clocks: main clock, should be <&cru SCLK_UPHY0_TCPDCORE> or
<&cru SCLK_UPHY1_TCPDCORE>;
- assigned-clock-rates : the phy core clk frequency, shall be: 50000000
- resets : a list of phandle + reset specifier pairs
- reset-names : string reset name, must be:
"uphy", "uphy-pipe", "uphy-tcphy"
- extcon : extcon specifier for the Power Delivery
Note, there are 2 type-c phys for RK3399, and they are almost identical, except
these registers(description below), every register node contains 3 sections:
offset, enable bit, write mask bit.
- rockchip,typec-conn-dir : the register of type-c connector direction,
for type-c phy0, it must be <0xe580 0 16>;
for type-c phy1, it must be <0xe58c 0 16>;
- rockchip,usb3tousb2-en : the register of type-c force usb3 to usb2 enable
control.
for type-c phy0, it must be <0xe580 3 19>;
for type-c phy1, it must be <0xe58c 3 19>;
- rockchip,external-psm : the register of type-c phy external psm clock
selection.
for type-c phy0, it must be <0xe588 14 30>;
for type-c phy1, it must be <0xe594 14 30>;
- rockchip,pipe-status : the register of type-c phy pipe status.
for type-c phy0, it must be <0xe5c0 0 0>;
for type-c phy1, it must be <0xe5c0 16 16>;
Required nodes : a sub-node is required for each port the phy provides.
The sub-node name is used to identify dp or usb3 port,
and shall be the following entries:
* "dp-port" : the name of DP port.
* "usb3-port" : the name of USB3 port.
Required properties (port (child) node):
- #phy-cells : must be 0, See ./phy-bindings.txt for details.
Example:
tcphy0: phy@ff7c0000 {
compatible = "rockchip,rk3399-typec-phy";
reg = <0x0 0xff7c0000 0x0 0x40000>;
rockchip,grf = <&grf>;
extcon = <&fusb0>;
clocks = <&cru SCLK_UPHY0_TCPDCORE>,
<&cru SCLK_UPHY0_TCPDPHY_REF>;
clock-names = "tcpdcore", "tcpdphy-ref";
assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
assigned-clock-rates = <50000000>;
resets = <&cru SRST_UPHY0>,
<&cru SRST_UPHY0_PIPE_L00>,
<&cru SRST_P_UPHY0_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
rockchip,typec-conn-dir = <0xe580 0 16>;
rockchip,usb3tousb2-en = <0xe580 3 19>;
rockchip,external-psm = <0xe588 14 30>;
rockchip,pipe-status = <0xe5c0 0 0>;
tcphy0_dp: dp-port {
#phy-cells = <0>;
};
tcphy0_usb3: usb3-port {
#phy-cells = <0>;
};
};
tcphy1: phy@ff800000 {
compatible = "rockchip,rk3399-typec-phy";
reg = <0x0 0xff800000 0x0 0x40000>;
rockchip,grf = <&grf>;
extcon = <&fusb1>;
clocks = <&cru SCLK_UPHY1_TCPDCORE>,
<&cru SCLK_UPHY1_TCPDPHY_REF>;
clock-names = "tcpdcore", "tcpdphy-ref";
assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
assigned-clock-rates = <50000000>;
resets = <&cru SRST_UPHY1>,
<&cru SRST_UPHY1_PIPE_L00>,
<&cru SRST_P_UPHY1_TCPHY>;
reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
rockchip,typec-conn-dir = <0xe58c 0 16>;
rockchip,usb3tousb2-en = <0xe58c 3 19>;
rockchip,external-psm = <0xe594 14 30>;
rockchip,pipe-status = <0xe5c0 16 16>;
tcphy1_dp: dp-port {
#phy-cells = <0>;
};
tcphy1_usb3: usb3-port {
#phy-cells = <0>;
};
};

6
Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt
View File

@ -5,6 +5,8 @@ This file provides information on what the device node for the R-Car generation
Required properties:
- compatible: "renesas,usb2-phy-r8a7795" if the device is a part of an R8A7795
SoC.
"renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796
SoC.
"renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device.
@ -30,11 +32,11 @@ Example (R-Car H3):
compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee080200 0 0x700>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
clocks = <&cpg CPG_MOD 703>;
};
usb-phy@ee0a0200 {
compatible = "renesas,usb2-phy-r8a7795", "renesas,rcar-gen3-usb2-phy";
reg = <0 0xee0a0200 0 0x700>;
clocks = <&mstp7_clks R8A7795_CLK_EHCI0>;
clocks = <&cpg CPG_MOD 702>;
};

31
Documentation/devicetree/bindings/phy/rockchip-pcie-phy.txt Normal file
View File

@ -0,0 +1,31 @@
Rockchip PCIE PHY
-----------------------
Required properties:
- compatible: rockchip,rk3399-pcie-phy
- #phy-cells: must be 0
- clocks: Must contain an entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names: Must be "refclk"
- resets: Must contain an entry in reset-names.
See ../reset/reset.txt for details.
- reset-names: Must be "phy"
Example:
grf: syscon@ff770000 {
compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
#address-cells = <1>;
#size-cells = <1>;
...
pcie_phy: pcie-phy {
compatible = "rockchip,rk3399-pcie-phy";
#phy-cells = <0>;
clocks = <&cru SCLK_PCIEPHY_REF>;
clock-names = "refclk";
resets = <&cru SRST_PCIEPHY>;
reset-names = "phy";
};
};

3
Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt
View File

@ -27,6 +27,9 @@ Optional Properties:
- clocks : phandle + clock specifier for the phy clocks
- clock-names: string, clock name, must be "phyclk"
- #clock-cells: for users of the phy-pll, should be 0
- reset-names: Only allow the following entries:
- phy-reset
- resets: Must contain an entry for each entry in reset-names.
Example:

1
Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt
View File

@ -10,6 +10,7 @@ Required properties:
* allwinner,sun8i-a23-usb-phy
* allwinner,sun8i-a33-usb-phy
* allwinner,sun8i-h3-usb-phy
* allwinner,sun50i-a64-usb-phy
- reg : a list of offset + length pairs
- reg-names :
* "phy_ctrl"

2
Documentation/devicetree/bindings/phy/ti-phy.txt
View File

@ -31,6 +31,8 @@ OMAP USB2 PHY
Required properties:
- compatible: Should be "ti,omap-usb2"
Should be "ti,dra7x-usb2" for the 1st instance of USB2 PHY on
DRA7x
Should be "ti,dra7x-usb2-phy2" for the 2nd instance of USB2 PHY
in DRA7x
- reg : Address and length of the register set for the device.

1
drivers/extcon/extcon-gpio.c
View File

@ -49,6 +49,7 @@ static void gpio_extcon_work(struct work_struct *work)
state = gpiod_get_value_cansleep(data->id_gpiod);
if (data->pdata->gpio_active_low)
state = !state;
extcon_set_state_sync(data->edev, data->pdata->extcon_id, state);
}

36
drivers/phy/Kconfig
View File

@ -24,6 +24,15 @@ config PHY_BCM_NS_USB2
Enable this to support Broadcom USB 2.0 PHY connected to the USB
controller on Northstar family.
config PHY_BCM_NS_USB3
tristate "Broadcom Northstar USB 3.0 PHY Driver"
depends on ARCH_BCM_IPROC || COMPILE_TEST
depends on HAS_IOMEM && OF
select GENERIC_PHY
help
Enable this to support Broadcom USB 3.0 PHY connected to the USB
controller on Northstar family.
config PHY_BERLIN_USB
tristate "Marvell Berlin USB PHY Driver"
depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF
@ -258,7 +267,9 @@ config PHY_SUN4I_USB
depends on RESET_CONTROLLER
depends on EXTCON
depends on POWER_SUPPLY
depends on USB_SUPPORT
select GENERIC_PHY
select USB_COMMON
help
Enable this to support the transceiver that is part of Allwinner
sunxi SoCs.
@ -358,6 +369,14 @@ config PHY_ROCKCHIP_USB
help
Enable this to support the Rockchip USB 2.0 PHY.
config PHY_ROCKCHIP_INNO_USB2
tristate "Rockchip INNO USB2PHY Driver"
depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF
depends on COMMON_CLK
select GENERIC_PHY
help
Support for Rockchip USB2.0 PHY with Innosilicon IP block.
config PHY_ROCKCHIP_EMMC
tristate "Rockchip EMMC PHY Driver"
depends on ARCH_ROCKCHIP && OF
@ -372,6 +391,23 @@ config PHY_ROCKCHIP_DP
help
Enable this to support the Rockchip Display Port PHY.
config PHY_ROCKCHIP_PCIE
tristate "Rockchip PCIe PHY Driver"
depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
select GENERIC_PHY
select MFD_SYSCON
help
Enable this to support the Rockchip PCIe PHY.
config PHY_ROCKCHIP_TYPEC
tristate "Rockchip TYPEC PHY Driver"
depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
select EXTCON
select GENERIC_PHY
select RESET_CONTROLLER
help
Enable this to support the Rockchip USB TYPEC PHY.
config PHY_ST_SPEAR1310_MIPHY
tristate "ST SPEAR1310-MIPHY driver"
select GENERIC_PHY

4
drivers/phy/Makefile
View File

@ -4,6 +4,7 @@
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o
obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o
obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
@ -39,8 +40,11 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o
obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o
obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o

274
drivers/phy/phy-bcm-ns-usb3.c Normal file
View File

@ -0,0 +1,274 @@
/*
* Broadcom Northstar USB 3.0 PHY Driver
*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
*
* All magic values used for initialization (and related comments) were obtained
* from Broadcom's SDK:
* Copyright (c) Broadcom Corp, 2012
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/slab.h>
#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
enum bcm_ns_family {
BCM_NS_UNKNOWN,
BCM_NS_AX,
BCM_NS_BX,
};
struct bcm_ns_usb3 {
struct device *dev;
enum bcm_ns_family family;
void __iomem *dmp;
void __iomem *ccb_mii;
struct phy *phy;
};
static const struct of_device_id bcm_ns_usb3_id_table[] = {
{
.compatible = "brcm,ns-ax-usb3-phy",
.data = (int *)BCM_NS_AX,
},
{
.compatible = "brcm,ns-bx-usb3-phy",
.data = (int *)BCM_NS_BX,
},
{},
};
MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);
static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr,
u32 mask, u32 value, unsigned long timeout)
{
unsigned long deadline = jiffies + timeout;
u32 val;
do {
val = readl(addr);
if ((val & mask) == value)
return 0;
cpu_relax();
udelay(10);
} while (!time_after_eq(jiffies, deadline));
dev_err(usb3->dev, "Timeout waiting for register %p\n", addr);
return -EBUSY;
}
static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3)
{
return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL,
0x0100, 0x0000,
usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
}
static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
{
int err;
err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
if (err < 0) {
dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value);
return err;
}
writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
return 0;
}
static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
{
int err;
/* Enable MDIO. Setting MDCDIV as 26 */
writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
/* Wait for MDIO? */
udelay(2);
/* USB3 PLL Block */
err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
if (err < 0)
return err;
/* Assert Ana_Pllseq start */
bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
/* Assert CML Divider ratio to 26 */
bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
/* Asserting PLL Reset */
bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
/* Deaaserting PLL Reset */
bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
/* Waiting MII Mgt interface idle */
bcm_ns_usb3_mii_mng_wait_idle(usb3);
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
/* PLL frequency monitor enable */
bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
/* PIPE Block */
bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
/* CMPMAX & CMPMINTH setting */
bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
/* DEGLITCH MIN & MAX setting */
bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
/* TXPMD block */
bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
/* Enabling SSC */
bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
/* Waiting MII Mgt interface idle */
bcm_ns_usb3_mii_mng_wait_idle(usb3);
return 0;
}
static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
{
int err;
/* Enable MDIO. Setting MDCDIV as 26 */
writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL);
/* Wait for MDIO? */
udelay(2);
/* PLL30 block */
err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
if (err < 0)
return err;
bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
/* Enable SSC */
bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
/* Waiting MII Mgt interface idle */
bcm_ns_usb3_mii_mng_wait_idle(usb3);
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
return 0;
}
static int bcm_ns_usb3_phy_init(struct phy *phy)
{
struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
int err;
/* Perform USB3 system soft reset */
writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
switch (usb3->family) {
case BCM_NS_AX:
err = bcm_ns_usb3_phy_init_ns_ax(usb3);
break;
case BCM_NS_BX:
err = bcm_ns_usb3_phy_init_ns_bx(usb3);
break;
default:
WARN_ON(1);
err = -ENOTSUPP;
}
return err;
}
static const struct phy_ops ops = {
.init = bcm_ns_usb3_phy_init,
.owner = THIS_MODULE,
};
static int bcm_ns_usb3_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *of_id;
struct bcm_ns_usb3 *usb3;
struct resource *res;
struct phy_provider *phy_provider;
usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return -ENOMEM;
usb3->dev = dev;
of_id = of_match_device(bcm_ns_usb3_id_table, dev);
if (!of_id)
return -EINVAL;
usb3->family = (enum bcm_ns_family)of_id->data;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp");
usb3->dmp = devm_ioremap_resource(dev, res);
if (IS_ERR(usb3->dmp)) {
dev_err(dev, "Failed to map DMP regs\n");
return PTR_ERR(usb3->dmp);
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii");
usb3->ccb_mii = devm_ioremap_resource(dev, res);
if (IS_ERR(usb3->ccb_mii)) {
dev_err(dev, "Failed to map ChipCommon B MII regs\n");
return PTR_ERR(usb3->ccb_mii);
}
usb3->phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(usb3->phy)) {
dev_err(dev, "Failed to create PHY\n");
return PTR_ERR(usb3->phy);
}
phy_set_drvdata(usb3->phy, usb3);
platform_set_drvdata(pdev, usb3);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (!IS_ERR(phy_provider))
dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n");
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver bcm_ns_usb3_driver = {
.probe = bcm_ns_usb3_probe,
.driver = {
.name = "bcm_ns_usb3",
.of_match_table = bcm_ns_usb3_id_table,
},
};
module_platform_driver(bcm_ns_usb3_driver);
MODULE_LICENSE("GPL v2");

28
drivers/phy/phy-bcm-ns2-pcie.c
View File

@ -18,11 +18,6 @@
#include <linux/phy.h>
#include <linux/phy/phy.h>
struct ns2_pci_phy {
struct mdio_device *mdiodev;
struct phy *phy;
};
#define BLK_ADDR_REG_OFFSET 0x1f
#define PLL_AFE1_100MHZ_BLK 0x2100
#define PLL_CLK_AMP_OFFSET 0x03
@ -30,17 +25,17 @@ struct ns2_pci_phy {
static int ns2_pci_phy_init(struct phy *p)
{
struct ns2_pci_phy *phy = phy_get_drvdata(p);
struct mdio_device *mdiodev = phy_get_drvdata(p);
int rc;
/* select the AFE 100MHz block page */
rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
BLK_ADDR_REG_OFFSET, PLL_AFE1_100MHZ_BLK);
if (rc)
goto err;
/* set the 100 MHz reference clock amplitude to 2.05 v */
rc = mdiobus_write(phy->mdiodev->bus, phy->mdiodev->addr,
rc = mdiobus_write(mdiodev->bus, mdiodev->addr,
PLL_CLK_AMP_OFFSET, PLL_CLK_AMP_2P05V);
if (rc)
goto err;
@ -48,19 +43,19 @@ static int ns2_pci_phy_init(struct phy *p)
return 0;
err:
dev_err(&phy->mdiodev->dev, "Error %d writing to phy\n", rc);
dev_err(&mdiodev->dev, "Error %d writing to phy\n", rc);
return rc;
}
static struct phy_ops ns2_pci_phy_ops = {
static const struct phy_ops ns2_pci_phy_ops = {
.init = ns2_pci_phy_init,
.owner = THIS_MODULE,
};
static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
struct phy_provider *provider;
struct ns2_pci_phy *p;
struct phy *phy;
phy = devm_phy_create(dev, dev->of_node, &ns2_pci_phy_ops);
@ -69,16 +64,7 @@ static int ns2_pci_phy_probe(struct mdio_device *mdiodev)
return PTR_ERR(phy);
}
p = devm_kmalloc(dev, sizeof(struct ns2_pci_phy),
GFP_KERNEL);
if (!p)
return -ENOMEM;
p->mdiodev = mdiodev;
dev_set_drvdata(dev, p);
p->phy = phy;
phy_set_drvdata(phy, p);
phy_set_drvdata(phy, mdiodev);
provider = devm_of_phy_provider_register(&phy->dev,
of_phy_simple_xlate);

15
drivers/phy/phy-core.c
View File

@ -357,6 +357,21 @@ int phy_set_mode(struct phy *phy, enum phy_mode mode)
}
EXPORT_SYMBOL_GPL(phy_set_mode);
int phy_reset(struct phy *phy)
{
int ret;
if (!phy || !phy->ops->reset)
return 0;
mutex_lock(&phy->mutex);
ret = phy->ops->reset(phy);
mutex_unlock(&phy->mutex);
return ret;
}
EXPORT_SYMBOL_GPL(phy_reset);
/**
* _of_phy_get() - lookup and obtain a reference to a phy by phandle
* @np: device_node for which to get the phy

2
drivers/phy/phy-da8xx-usb.c
View File

@ -154,7 +154,7 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
d_phy->regmap = syscon_regmap_lookup_by_compatible(
"ti,da830-cfgchip");
else
d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon.0");
d_phy->regmap = syscon_regmap_lookup_by_pdevname("syscon");
if (IS_ERR(d_phy->regmap)) {
dev_err(dev, "Failed to get syscon\n");
return PTR_ERR(d_phy->regmap);

4
drivers/phy/phy-exynos5-usbdrd.c
View File

@ -249,7 +249,7 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
static unsigned int
exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
{
static u32 reg;
u32 reg;
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
/* restore any previous reference clock settings */
@ -295,7 +295,7 @@ exynos5_usbdrd_pipe3_set_refclk(struct phy_usb_instance *inst)
static unsigned int
exynos5_usbdrd_utmi_set_refclk(struct phy_usb_instance *inst)
{
static u32 reg;
u32 reg;
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
/* restore any previous reference clock settings */

100
drivers/phy/phy-omap-usb2.c
View File

@ -133,11 +133,49 @@ static int omap_usb_power_on(struct phy *x)
return omap_usb_phy_power(phy, true);
}
static int omap_usb2_disable_clocks(struct omap_usb *phy)
{
clk_disable(phy->wkupclk);
if (!IS_ERR(phy->optclk))
clk_disable(phy->optclk);
return 0;
}
static int omap_usb2_enable_clocks(struct omap_usb *phy)
{
int ret;
ret = clk_enable(phy->wkupclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err0;
}
if (!IS_ERR(phy->optclk)) {
ret = clk_enable(phy->optclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
goto err1;
}
}
return 0;
err1:
clk_disable(phy->wkupclk);
err0:
return ret;
}
static int omap_usb_init(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
u32 val;
omap_usb2_enable_clocks(phy);
if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) {
/*
*
@ -155,8 +193,16 @@ static int omap_usb_init(struct phy *x)
return 0;
}
static int omap_usb_exit(struct phy *x)
{
struct omap_usb *phy = phy_get_drvdata(x);
return omap_usb2_disable_clocks(phy);
}
static const struct phy_ops ops = {
.init = omap_usb_init,
.exit = omap_usb_exit,
.power_on = omap_usb_power_on,
.power_off = omap_usb_power_off,
.owner = THIS_MODULE,
@ -376,65 +422,11 @@ static int omap_usb2_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
static int omap_usb2_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_usb *phy = platform_get_drvdata(pdev);
clk_disable(phy->wkupclk);
if (!IS_ERR(phy->optclk))
clk_disable(phy->optclk);
return 0;
}
static int omap_usb2_runtime_resume(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_usb *phy = platform_get_drvdata(pdev);
int ret;
ret = clk_enable(phy->wkupclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret);
goto err0;
}
if (!IS_ERR(phy->optclk)) {
ret = clk_enable(phy->optclk);
if (ret < 0) {
dev_err(phy->dev, "Failed to enable optclk %d\n", ret);
goto err1;
}
}
return 0;
err1:
clk_disable(phy->wkupclk);
err0:
return ret;
}
static const struct dev_pm_ops omap_usb2_pm_ops = {
SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume,
NULL)
};
#define DEV_PM_OPS (&omap_usb2_pm_ops)
#else
#define DEV_PM_OPS NULL
#endif
static struct platform_driver omap_usb2_driver = {
.probe = omap_usb2_probe,
.remove = omap_usb2_remove,
.driver = {
.name = "omap-usb2",
.pm = DEV_PM_OPS,
.of_match_table = omap_usb2_id_table,
},
};

6
drivers/phy/phy-qcom-ufs.c
View File

@ -283,10 +283,8 @@ static int __ufs_qcom_phy_init_vreg(struct phy *phy,
err = 0;
}
snprintf(prop_name, MAX_PROP_NAME, "%s-always-on", name);
if (of_get_property(dev->of_node, prop_name, NULL))
vreg->is_always_on = true;
else
vreg->is_always_on = false;
vreg->is_always_on = of_property_read_bool(dev->of_node,
prop_name);
}
if (!strcmp(name, "vdda-pll")) {

1
drivers/phy/phy-rcar-gen3-usb2.c
View File

@ -280,6 +280,7 @@ static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{ .compatible = "renesas,usb2-phy-r8a7795" },
{ .compatible = "renesas,usb2-phy-r8a7796" },
{ .compatible = "renesas,rcar-gen3-usb2-phy" },
{ }
};

707
drivers/phy/phy-rockchip-inno-usb2.c Normal file
View File

@ -0,0 +1,707 @@
/*
* Rockchip USB2.0 PHY with Innosilicon IP block driver
*
* Copyright (C) 2016 Fuzhou Rockchip Electronics Co., Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/gpio/consumer.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#define BIT_WRITEABLE_SHIFT 16
#define SCHEDULE_DELAY (60 * HZ)
enum rockchip_usb2phy_port_id {
USB2PHY_PORT_OTG,
USB2PHY_PORT_HOST,
USB2PHY_NUM_PORTS,
};
enum rockchip_usb2phy_host_state {
PHY_STATE_HS_ONLINE = 0,
PHY_STATE_DISCONNECT = 1,
PHY_STATE_CONNECT = 2,
PHY_STATE_FS_LS_ONLINE = 4,
};
struct usb2phy_reg {
unsigned int offset;
unsigned int bitend;
unsigned int bitstart;
unsigned int disable;
unsigned int enable;
};
/**
* struct rockchip_usb2phy_port_cfg: usb-phy port configuration.
* @phy_sus: phy suspend register.
* @ls_det_en: linestate detection enable register.
* @ls_det_st: linestate detection state register.
* @ls_det_clr: linestate detection clear register.
* @utmi_ls: utmi linestate state register.
* @utmi_hstdet: utmi host disconnect register.
*/
struct rockchip_usb2phy_port_cfg {
struct usb2phy_reg phy_sus;
struct usb2phy_reg ls_det_en;
struct usb2phy_reg ls_det_st;
struct usb2phy_reg ls_det_clr;
struct usb2phy_reg utmi_ls;
struct usb2phy_reg utmi_hstdet;
};
/**
* struct rockchip_usb2phy_cfg: usb-phy configuration.
* @reg: the address offset of grf for usb-phy config.
* @num_ports: specify how many ports that the phy has.
* @clkout_ctl: keep on/turn off output clk of phy.
*/
struct rockchip_usb2phy_cfg {
unsigned int reg;
unsigned int num_ports;
struct usb2phy_reg clkout_ctl;
const struct rockchip_usb2phy_port_cfg port_cfgs[USB2PHY_NUM_PORTS];
};
/**
* struct rockchip_usb2phy_port: usb-phy port data.
* @port_id: flag for otg port or host port.
* @suspended: phy suspended flag.
* @ls_irq: IRQ number assigned for linestate detection.
* @mutex: for register updating in sm_work.
* @sm_work: OTG state machine work.
* @phy_cfg: port register configuration, assigned by driver data.
*/
struct rockchip_usb2phy_port {
struct phy *phy;
unsigned int port_id;
bool suspended;
int ls_irq;
struct mutex mutex;
struct delayed_work sm_work;
const struct rockchip_usb2phy_port_cfg *port_cfg;
};
/**
* struct rockchip_usb2phy: usb2.0 phy driver data.
* @grf: General Register Files regmap.
* @clk: clock struct of phy input clk.
* @clk480m: clock struct of phy output clk.
* @clk_hw: clock struct of phy output clk management.
* @phy_cfg: phy register configuration, assigned by driver data.
* @ports: phy port instance.
*/
struct rockchip_usb2phy {
struct device *dev;
struct regmap *grf;
struct clk *clk;
struct clk *clk480m;
struct clk_hw clk480m_hw;
const struct rockchip_usb2phy_cfg *phy_cfg;
struct rockchip_usb2phy_port ports[USB2PHY_NUM_PORTS];
};
static inline int property_enable(struct rockchip_usb2phy *rphy,
const struct usb2phy_reg *reg, bool en)
{
unsigned int val, mask, tmp;
tmp = en ? reg->enable : reg->disable;
mask = GENMASK(reg->bitend, reg->bitstart);
val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT);
return regmap_write(rphy->grf, reg->offset, val);
}
static inline bool property_enabled(struct rockchip_usb2phy *rphy,
const struct usb2phy_reg *reg)
{
int ret;
unsigned int tmp, orig;
unsigned int mask = GENMASK(reg->bitend, reg->bitstart);
ret = regmap_read(rphy->grf, reg->offset, &orig);
if (ret)
return false;
tmp = (orig & mask) >> reg->bitstart;
return tmp == reg->enable;
}
static int rockchip_usb2phy_clk480m_enable(struct clk_hw *hw)
{
struct rockchip_usb2phy *rphy =
container_of(hw, struct rockchip_usb2phy, clk480m_hw);
int ret;
/* turn on 480m clk output if it is off */
if (!property_enabled(rphy, &rphy->phy_cfg->clkout_ctl)) {
ret = property_enable(rphy, &rphy->phy_cfg->clkout_ctl, true);
if (ret)
return ret;
/* waitting for the clk become stable */
mdelay(1);
}
return 0;
}
static void rockchip_usb2phy_clk480m_disable(struct clk_hw *hw)
{
struct rockchip_usb2phy *rphy =
container_of(hw, struct rockchip_usb2phy, clk480m_hw);
/* turn off 480m clk output */
property_enable(rphy, &rphy->phy_cfg->clkout_ctl, false);
}
static int rockchip_usb2phy_clk480m_enabled(struct clk_hw *hw)
{
struct rockchip_usb2phy *rphy =
container_of(hw, struct rockchip_usb2phy, clk480m_hw);
return property_enabled(rphy, &rphy->phy_cfg->clkout_ctl);
}
static unsigned long
rockchip_usb2phy_clk480m_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
return 480000000;
}
static const struct clk_ops rockchip_usb2phy_clkout_ops = {
.enable = rockchip_usb2phy_clk480m_enable,
.disable = rockchip_usb2phy_clk480m_disable,
.is_enabled = rockchip_usb2phy_clk480m_enabled,
.recalc_rate = rockchip_usb2phy_clk480m_recalc_rate,
};
static void rockchip_usb2phy_clk480m_unregister(void *data)
{
struct rockchip_usb2phy *rphy = data;
of_clk_del_provider(rphy->dev->of_node);
clk_unregister(rphy->clk480m);
}
static int
rockchip_usb2phy_clk480m_register(struct rockchip_usb2phy *rphy)
{
struct device_node *node = rphy->dev->of_node;
struct clk_init_data init;
const char *clk_name;
int ret;
init.flags = 0;
init.name = "clk_usbphy_480m";
init.ops = &rockchip_usb2phy_clkout_ops;
/* optional override of the clockname */
of_property_read_string(node, "clock-output-names", &init.name);
if (rphy->clk) {
clk_name = __clk_get_name(rphy->clk);
init.parent_names = &clk_name;
init.num_parents = 1;
} else {
init.parent_names = NULL;
init.num_parents = 0;
}
rphy->clk480m_hw.init = &init;
/* register the clock */
rphy->clk480m = clk_register(rphy->dev, &rphy->clk480m_hw);
if (IS_ERR(rphy->clk480m)) {
ret = PTR_ERR(rphy->clk480m);
goto err_ret;
}
ret = of_clk_add_provider(node, of_clk_src_simple_get, rphy->clk480m);
if (ret < 0)
goto err_clk_provider;
ret = devm_add_action(rphy->dev, rockchip_usb2phy_clk480m_unregister,
rphy);
if (ret < 0)
goto err_unreg_action;
return 0;
err_unreg_action:
of_clk_del_provider(node);
err_clk_provider:
clk_unregister(rphy->clk480m);
err_ret:
return ret;
}
static int rockchip_usb2phy_init(struct phy *phy)
{
struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
int ret;
if (rport->port_id == USB2PHY_PORT_HOST) {
/* clear linestate and enable linestate detect irq */
mutex_lock(&rport->mutex);
ret = property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
if (ret) {
mutex_unlock(&rport->mutex);
return ret;
}
ret = property_enable(rphy, &rport->port_cfg->ls_det_en, true);
if (ret) {
mutex_unlock(&rport->mutex);
return ret;
}
mutex_unlock(&rport->mutex);
schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
}
return 0;
}
static int rockchip_usb2phy_power_on(struct phy *phy)
{
struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
int ret;
dev_dbg(&rport->phy->dev, "port power on\n");
if (!rport->suspended)
return 0;
ret = clk_prepare_enable(rphy->clk480m);
if (ret)
return ret;
ret = property_enable(rphy, &rport->port_cfg->phy_sus, false);
if (ret)
return ret;
rport->suspended = false;
return 0;
}
static int rockchip_usb2phy_power_off(struct phy *phy)
{
struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
struct rockchip_usb2phy *rphy = dev_get_drvdata(phy->dev.parent);
int ret;
dev_dbg(&rport->phy->dev, "port power off\n");
if (rport->suspended)
return 0;
ret = property_enable(rphy, &rport->port_cfg->phy_sus, true);
if (ret)
return ret;
rport->suspended = true;
clk_disable_unprepare(rphy->clk480m);
return 0;
}
static int rockchip_usb2phy_exit(struct phy *phy)
{
struct rockchip_usb2phy_port *rport = phy_get_drvdata(phy);
if (rport->port_id == USB2PHY_PORT_HOST)
cancel_delayed_work_sync(&rport->sm_work);
return 0;
}
static const struct phy_ops rockchip_usb2phy_ops = {
.init = rockchip_usb2phy_init,
.exit = rockchip_usb2phy_exit,
.power_on = rockchip_usb2phy_power_on,
.power_off = rockchip_usb2phy_power_off,
.owner = THIS_MODULE,
};
/*
* The function manage host-phy port state and suspend/resume phy port
* to save power.
*
* we rely on utmi_linestate and utmi_hostdisconnect to identify whether
* devices is disconnect or not. Besides, we do not need care it is FS/LS
* disconnected or HS disconnected, actually, we just only need get the
* device is disconnected at last through rearm the delayed work,
* to suspend the phy port in _PHY_STATE_DISCONNECT_ case.
*
* NOTE: It may invoke *phy_powr_off or *phy_power_on which will invoke
* some clk related APIs, so do not invoke it from interrupt context directly.
*/
static void rockchip_usb2phy_sm_work(struct work_struct *work)
{
struct rockchip_usb2phy_port *rport =
container_of(work, struct rockchip_usb2phy_port, sm_work.work);
struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
unsigned int sh = rport->port_cfg->utmi_hstdet.bitend -
rport->port_cfg->utmi_hstdet.bitstart + 1;
unsigned int ul, uhd, state;
unsigned int ul_mask, uhd_mask;
int ret;
mutex_lock(&rport->mutex);
ret = regmap_read(rphy->grf, rport->port_cfg->utmi_ls.offset, &ul);
if (ret < 0)
goto next_schedule;
ret = regmap_read(rphy->grf, rport->port_cfg->utmi_hstdet.offset,
&uhd);
if (ret < 0)
goto next_schedule;
uhd_mask = GENMASK(rport->port_cfg->utmi_hstdet.bitend,
rport->port_cfg->utmi_hstdet.bitstart);
ul_mask = GENMASK(rport->port_cfg->utmi_ls.bitend,
rport->port_cfg->utmi_ls.bitstart);
/* stitch on utmi_ls and utmi_hstdet as phy state */
state = ((uhd & uhd_mask) >> rport->port_cfg->utmi_hstdet.bitstart) |
(((ul & ul_mask) >> rport->port_cfg->utmi_ls.bitstart) << sh);
switch (state) {
case PHY_STATE_HS_ONLINE:
dev_dbg(&rport->phy->dev, "HS online\n");
break;
case PHY_STATE_FS_LS_ONLINE:
/*
* For FS/LS device, the online state share with connect state
* from utmi_ls and utmi_hstdet register, so we distinguish
* them via suspended flag.
*
* Plus, there are two cases, one is D- Line pull-up, and D+
* line pull-down, the state is 4; another is D+ line pull-up,
* and D- line pull-down, the state is 2.
*/
if (!rport->suspended) {
/* D- line pull-up, D+ line pull-down */
dev_dbg(&rport->phy->dev, "FS/LS online\n");
break;
}
/* fall through */
case PHY_STATE_CONNECT:
if (rport->suspended) {
dev_dbg(&rport->phy->dev, "Connected\n");
rockchip_usb2phy_power_on(rport->phy);
rport->suspended = false;
} else {
/* D+ line pull-up, D- line pull-down */
dev_dbg(&rport->phy->dev, "FS/LS online\n");
}
break;
case PHY_STATE_DISCONNECT:
if (!rport->suspended) {
dev_dbg(&rport->phy->dev, "Disconnected\n");
rockchip_usb2phy_power_off(rport->phy);
rport->suspended = true;
}
/*
* activate the linestate detection to get the next device
* plug-in irq.
*/
property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
property_enable(rphy, &rport->port_cfg->ls_det_en, true);
/*
* we don't need to rearm the delayed work when the phy port
* is suspended.
*/
mutex_unlock(&rport->mutex);
return;
default:
dev_dbg(&rport->phy->dev, "unknown phy state\n");
break;
}
next_schedule:
mutex_unlock(&rport->mutex);
schedule_delayed_work(&rport->sm_work, SCHEDULE_DELAY);
}
static irqreturn_t rockchip_usb2phy_linestate_irq(int irq, void *data)
{
struct rockchip_usb2phy_port *rport = data;
struct rockchip_usb2phy *rphy = dev_get_drvdata(rport->phy->dev.parent);
if (!property_enabled(rphy, &rport->port_cfg->ls_det_st))
return IRQ_NONE;
mutex_lock(&rport->mutex);
/* disable linestate detect irq and clear its status */
property_enable(rphy, &rport->port_cfg->ls_det_en, false);
property_enable(rphy, &rport->port_cfg->ls_det_clr, true);
mutex_unlock(&rport->mutex);
/*
* In this case for host phy port, a new device is plugged in,
* meanwhile, if the phy port is suspended, we need rearm the work to
* resume it and mange its states; otherwise, we do nothing about that.
*/
if (rport->suspended && rport->port_id == USB2PHY_PORT_HOST)
rockchip_usb2phy_sm_work(&rport->sm_work.work);
return IRQ_HANDLED;
}
static int rockchip_usb2phy_host_port_init(struct rockchip_usb2phy *rphy,
struct rockchip_usb2phy_port *rport,
struct device_node *child_np)
{
int ret;
rport->port_id = USB2PHY_PORT_HOST;
rport->port_cfg = &rphy->phy_cfg->port_cfgs[USB2PHY_PORT_HOST];
rport->suspended = true;
mutex_init(&rport->mutex);
INIT_DELAYED_WORK(&rport->sm_work, rockchip_usb2phy_sm_work);
rport->ls_irq = of_irq_get_byname(child_np, "linestate");
if (rport->ls_irq < 0) {
dev_err(rphy->dev, "no linestate irq provided\n");
return rport->ls_irq;
}
ret = devm_request_threaded_irq(rphy->dev, rport->ls_irq, NULL,
rockchip_usb2phy_linestate_irq,
IRQF_ONESHOT,
"rockchip_usb2phy", rport);
if (ret) {
dev_err(rphy->dev, "failed to request irq handle\n");
return ret;
}
return 0;
}
static int rockchip_usb2phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
struct device_node *child_np;
struct phy_provider *provider;
struct rockchip_usb2phy *rphy;
const struct rockchip_usb2phy_cfg *phy_cfgs;
const struct of_device_id *match;
unsigned int reg;
int index, ret;
rphy = devm_kzalloc(dev, sizeof(*rphy), GFP_KERNEL);
if (!rphy)
return -ENOMEM;
match = of_match_device(dev->driver->of_match_table, dev);
if (!match || !match->data) {
dev_err(dev, "phy configs are not assigned!\n");
return -EINVAL;
}
if (!dev->parent || !dev->parent->of_node)
return -EINVAL;
rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
if (IS_ERR(rphy->grf))
return PTR_ERR(rphy->grf);
if (of_property_read_u32(np, "reg", &reg)) {
dev_err(dev, "the reg property is not assigned in %s node\n",
np->name);
return -EINVAL;
}
rphy->dev = dev;
phy_cfgs = match->data;
platform_set_drvdata(pdev, rphy);
/* find out a proper config which can be matched with dt. */
index = 0;
while (phy_cfgs[index].reg) {
if (phy_cfgs[index].reg == reg) {
rphy->phy_cfg = &phy_cfgs[index];
break;
}
++index;
}
if (!rphy->phy_cfg) {
dev_err(dev, "no phy-config can be matched with %s node\n",
np->name);
return -EINVAL;
}
rphy->clk = of_clk_get_by_name(np, "phyclk");
if (!IS_ERR(rphy->clk)) {
clk_prepare_enable(rphy->clk);
} else {
dev_info(&pdev->dev, "no phyclk specified\n");
rphy->clk = NULL;
}
ret = rockchip_usb2phy_clk480m_register(rphy);
if (ret) {
dev_err(dev, "failed to register 480m output clock\n");
goto disable_clks;
}
index = 0;
for_each_available_child_of_node(np, child_np) {
struct rockchip_usb2phy_port *rport = &rphy->ports[index];
struct phy *phy;
/*
* This driver aim to support both otg-port and host-port,
* but unfortunately, the otg part is not ready in current,
* so this comments and below codes are interim, which should
* be changed after otg-port is supplied soon.
*/
if (of_node_cmp(child_np->name, "host-port"))
goto next_child;
phy = devm_phy_create(dev, child_np, &rockchip_usb2phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create phy\n");
ret = PTR_ERR(phy);
goto put_child;
}
rport->phy = phy;
phy_set_drvdata(rport->phy, rport);
ret = rockchip_usb2phy_host_port_init(rphy, rport, child_np);
if (ret)
goto put_child;
next_child:
/* to prevent out of boundary */
if (++index >= rphy->phy_cfg->num_ports)
break;
}
provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(provider);
put_child:
of_node_put(child_np);
disable_clks:
if (rphy->clk) {
clk_disable_unprepare(rphy->clk);
clk_put(rphy->clk);
}
return ret;
}
static const struct rockchip_usb2phy_cfg rk3366_phy_cfgs[] = {
{
.reg = 0x700,
.num_ports = 2,
.clkout_ctl = { 0x0724, 15, 15, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0x0728, 15, 0, 0, 0x1d1 },
.ls_det_en = { 0x0680, 4, 4, 0, 1 },
.ls_det_st = { 0x0690, 4, 4, 0, 1 },
.ls_det_clr = { 0x06a0, 4, 4, 0, 1 },
.utmi_ls = { 0x049c, 14, 13, 0, 1 },
.utmi_hstdet = { 0x049c, 12, 12, 0, 1 }
}
},
},
{ /* sentinel */ }
};
static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{
.reg = 0xe450,
.num_ports = 2,
.clkout_ctl = { 0xe450, 4, 4, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0xe458, 1, 0, 0x2, 0x1 },
.ls_det_en = { 0xe3c0, 6, 6, 0, 1 },
.ls_det_st = { 0xe3e0, 6, 6, 0, 1 },
.ls_det_clr = { 0xe3d0, 6, 6, 0, 1 },
.utmi_ls = { 0xe2ac, 22, 21, 0, 1 },
.utmi_hstdet = { 0xe2ac, 23, 23, 0, 1 }
}
},
},
{
.reg = 0xe460,
.num_ports = 2,
.clkout_ctl = { 0xe460, 4, 4, 1, 0 },
.port_cfgs = {
[USB2PHY_PORT_HOST] = {
.phy_sus = { 0xe468, 1, 0, 0x2, 0x1 },
.ls_det_en = { 0xe3c0, 11, 11, 0, 1 },
.ls_det_st = { 0xe3e0, 11, 11, 0, 1 },
.ls_det_clr = { 0xe3d0, 11, 11, 0, 1 },
.utmi_ls = { 0xe2ac, 26, 25, 0, 1 },
.utmi_hstdet = { 0xe2ac, 27, 27, 0, 1 }
}
},
},
{ /* sentinel */ }
};
static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
{}
};
MODULE_DEVICE_TABLE(of, rockchip_usb2phy_dt_match);
static struct platform_driver rockchip_usb2phy_driver = {
.probe = rockchip_usb2phy_probe,
.driver = {
.name = "rockchip-usb2phy",
.of_match_table = rockchip_usb2phy_dt_match,
},
};
module_platform_driver(rockchip_usb2phy_driver);
MODULE_AUTHOR("Frank Wang <frank.wang@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip USB2.0 PHY driver");
MODULE_LICENSE("GPL v2");

357
drivers/phy/phy-rockchip-pcie.c Normal file
View File

@ -0,0 +1,357 @@
/*
* Rockchip PCIe PHY driver
*
* Copyright (C) 2016 Shawn Lin <shawn.lin@rock-chips.com>
* Copyright (C) 2016 ROCKCHIP, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/reset.h>
/*
* The higher 16-bit of this register is used for write protection
* only if BIT(x + 16) set to 1 the BIT(x) can be written.
*/
#define HIWORD_UPDATE(val, mask, shift) \
((val) << (shift) | (mask) << ((shift) + 16))
#define PHY_MAX_LANE_NUM 4
#define PHY_CFG_DATA_SHIFT 7
#define PHY_CFG_ADDR_SHIFT 1
#define PHY_CFG_DATA_MASK 0xf
#define PHY_CFG_ADDR_MASK 0x3f
#define PHY_CFG_RD_MASK 0x3ff
#define PHY_CFG_WR_ENABLE 1
#define PHY_CFG_WR_DISABLE 1
#define PHY_CFG_WR_SHIFT 0
#define PHY_CFG_WR_MASK 1
#define PHY_CFG_PLL_LOCK 0x10
#define PHY_CFG_CLK_TEST 0x10
#define PHY_CFG_CLK_SCC 0x12
#define PHY_CFG_SEPE_RATE BIT(3)
#define PHY_CFG_PLL_100M BIT(3)
#define PHY_PLL_LOCKED BIT(9)
#define PHY_PLL_OUTPUT BIT(10)
#define PHY_LANE_A_STATUS 0x30
#define PHY_LANE_B_STATUS 0x31
#define PHY_LANE_C_STATUS 0x32
#define PHY_LANE_D_STATUS 0x33
#define PHY_LANE_RX_DET_SHIFT 11
#define PHY_LANE_RX_DET_TH 0x1
#define PHY_LANE_IDLE_OFF 0x1
#define PHY_LANE_IDLE_MASK 0x1
#define PHY_LANE_IDLE_A_SHIFT 3
#define PHY_LANE_IDLE_B_SHIFT 4
#define PHY_LANE_IDLE_C_SHIFT 5
#define PHY_LANE_IDLE_D_SHIFT 6
struct rockchip_pcie_data {
unsigned int pcie_conf;
unsigned int pcie_status;
unsigned int pcie_laneoff;
};
struct rockchip_pcie_phy {
struct rockchip_pcie_data *phy_data;
struct regmap *reg_base;
struct reset_control *phy_rst;
struct clk *clk_pciephy_ref;
};
static inline void phy_wr_cfg(struct rockchip_pcie_phy *rk_phy,
u32 addr, u32 data)
{
regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
HIWORD_UPDATE(data,
PHY_CFG_DATA_MASK,
PHY_CFG_DATA_SHIFT) |
HIWORD_UPDATE(addr,
PHY_CFG_ADDR_MASK,
PHY_CFG_ADDR_SHIFT));
udelay(1);
regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
HIWORD_UPDATE(PHY_CFG_WR_ENABLE,
PHY_CFG_WR_MASK,
PHY_CFG_WR_SHIFT));
udelay(1);
regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
HIWORD_UPDATE(PHY_CFG_WR_DISABLE,
PHY_CFG_WR_MASK,
PHY_CFG_WR_SHIFT));
}
static inline u32 phy_rd_cfg(struct rockchip_pcie_phy *rk_phy,
u32 addr)
{
u32 val;
regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
HIWORD_UPDATE(addr,
PHY_CFG_RD_MASK,
PHY_CFG_ADDR_SHIFT));
regmap_read(rk_phy->reg_base,
rk_phy->phy_data->pcie_status,
&val);
return val;
}
static int rockchip_pcie_phy_power_off(struct phy *phy)
{
struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
int err = 0;
err = reset_control_assert(rk_phy->phy_rst);
if (err) {
dev_err(&phy->dev, "assert phy_rst err %d\n", err);
return err;
}
return 0;
}
static int rockchip_pcie_phy_power_on(struct phy *phy)
{
struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
int err = 0;
u32 status;
unsigned long timeout;
err = reset_control_deassert(rk_phy->phy_rst);
if (err) {
dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
return err;
}
regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
PHY_CFG_ADDR_MASK,
PHY_CFG_ADDR_SHIFT));
/*
* No documented timeout value for phy operation below,
* so we make it large enough here. And we use loop-break
* method which should not be harmful.
*/
timeout = jiffies + msecs_to_jiffies(1000);
err = -EINVAL;
while (time_before(jiffies, timeout)) {
regmap_read(rk_phy->reg_base,
rk_phy->phy_data->pcie_status,
&status);
if (status & PHY_PLL_LOCKED) {
dev_dbg(&phy->dev, "pll locked!\n");
err = 0;
break;
}
msleep(20);
}
if (err) {
dev_err(&phy->dev, "pll lock timeout!\n");
goto err_pll_lock;
}
phy_wr_cfg(rk_phy, PHY_CFG_CLK_TEST, PHY_CFG_SEPE_RATE);
phy_wr_cfg(rk_phy, PHY_CFG_CLK_SCC, PHY_CFG_PLL_100M);
err = -ETIMEDOUT;
while (time_before(jiffies, timeout)) {
regmap_read(rk_phy->reg_base,
rk_phy->phy_data->pcie_status,
&status);
if (!(status & PHY_PLL_OUTPUT)) {
dev_dbg(&phy->dev, "pll output enable done!\n");
err = 0;
break;
}
msleep(20);
}
if (err) {
dev_err(&phy->dev, "pll output enable timeout!\n");
goto err_pll_lock;
}
regmap_write(rk_phy->reg_base, rk_phy->phy_data->pcie_conf,
HIWORD_UPDATE(PHY_CFG_PLL_LOCK,
PHY_CFG_ADDR_MASK,
PHY_CFG_ADDR_SHIFT));
err = -EINVAL;
while (time_before(jiffies, timeout)) {
regmap_read(rk_phy->reg_base,
rk_phy->phy_data->pcie_status,
&status);
if (status & PHY_PLL_LOCKED) {
dev_dbg(&phy->dev, "pll relocked!\n");
err = 0;
break;
}
msleep(20);
}
if (err) {
dev_err(&phy->dev, "pll relock timeout!\n");
goto err_pll_lock;
}
return 0;
err_pll_lock:
reset_control_assert(rk_phy->phy_rst);
return err;
}
static int rockchip_pcie_phy_init(struct phy *phy)
{
struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
int err = 0;
err = clk_prepare_enable(rk_phy->clk_pciephy_ref);
if (err) {
dev_err(&phy->dev, "Fail to enable pcie ref clock.\n");
goto err_refclk;
}
err = reset_control_assert(rk_phy->phy_rst);
if (err) {
dev_err(&phy->dev, "assert phy_rst err %d\n", err);
goto err_reset;
}
return err;
err_reset:
clk_disable_unprepare(rk_phy->clk_pciephy_ref);
err_refclk:
return err;
}
static int rockchip_pcie_phy_exit(struct phy *phy)
{
struct rockchip_pcie_phy *rk_phy = phy_get_drvdata(phy);
int err = 0;
clk_disable_unprepare(rk_phy->clk_pciephy_ref);
err = reset_control_deassert(rk_phy->phy_rst);
if (err) {
dev_err(&phy->dev, "deassert phy_rst err %d\n", err);
goto err_reset;
}
return err;
err_reset:
clk_prepare_enable(rk_phy->clk_pciephy_ref);
return err;
}
static const struct phy_ops ops = {
.init = rockchip_pcie_phy_init,
.exit = rockchip_pcie_phy_exit,
.power_on = rockchip_pcie_phy_power_on,
.power_off = rockchip_pcie_phy_power_off,
.owner = THIS_MODULE,
};
static const struct rockchip_pcie_data rk3399_pcie_data = {
.pcie_conf = 0xe220,
.pcie_status = 0xe2a4,
.pcie_laneoff = 0xe214,
};
static const struct of_device_id rockchip_pcie_phy_dt_ids[] = {
{
.compatible = "rockchip,rk3399-pcie-phy",
.data = &rk3399_pcie_data,
},
{}
};
MODULE_DEVICE_TABLE(of, rockchip_pcie_phy_dt_ids);
static int rockchip_pcie_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rockchip_pcie_phy *rk_phy;
struct phy *generic_phy;
struct phy_provider *phy_provider;
struct regmap *grf;
const struct of_device_id *of_id;
grf = syscon_node_to_regmap(dev->parent->of_node);
if (IS_ERR(grf)) {
dev_err(dev, "Cannot find GRF syscon\n");
return PTR_ERR(grf);
}
rk_phy = devm_kzalloc(dev, sizeof(*rk_phy), GFP_KERNEL);
if (!rk_phy)
return -ENOMEM;
of_id = of_match_device(rockchip_pcie_phy_dt_ids, &pdev->dev);
if (!of_id)
return -EINVAL;
rk_phy->phy_data = (struct rockchip_pcie_data *)of_id->data;
rk_phy->reg_base = grf;
rk_phy->phy_rst = devm_reset_control_get(dev, "phy");
if (IS_ERR(rk_phy->phy_rst)) {
if (PTR_ERR(rk_phy->phy_rst) != -EPROBE_DEFER)
dev_err(dev,
"missing phy property for reset controller\n");
return PTR_ERR(rk_phy->phy_rst);
}
rk_phy->clk_pciephy_ref = devm_clk_get(dev, "refclk");
if (IS_ERR(rk_phy->clk_pciephy_ref)) {
dev_err(dev, "refclk not found.\n");
return PTR_ERR(rk_phy->clk_pciephy_ref);
}
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
if (IS_ERR(generic_phy)) {
dev_err(dev, "failed to create PHY\n");
return PTR_ERR(generic_phy);
}
phy_set_drvdata(generic_phy, rk_phy);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct platform_driver rockchip_pcie_driver = {
.probe = rockchip_pcie_phy_probe,
.driver = {
.name = "rockchip-pcie-phy",
.of_match_table = rockchip_pcie_phy_dt_ids,
},
};
module_platform_driver(rockchip_pcie_driver);
MODULE_AUTHOR("Shawn Lin <shawn.lin@rock-chips.com>");
MODULE_DESCRIPTION("Rockchip PCIe PHY driver");
MODULE_LICENSE("GPL v2");

1023
drivers/phy/phy-rockchip-typec.c Normal file
View File

File diff suppressed because it is too large Load Diff

20
drivers/phy/phy-rockchip-usb.c
View File

@ -29,6 +29,7 @@
#include <linux/reset.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/delay.h>
static int enable_usb_uart;
@ -64,6 +65,7 @@ struct rockchip_usb_phy {
struct clk_hw clk480m_hw;
struct phy *phy;
bool uart_enabled;
struct reset_control *reset;
};
static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy,
@ -144,9 +146,23 @@ static int rockchip_usb_phy_power_on(struct phy *_phy)
return clk_prepare_enable(phy->clk480m);
}
static int rockchip_usb_phy_reset(struct phy *_phy)
{
struct rockchip_usb_phy *phy = phy_get_drvdata(_phy);
if (phy->reset) {
reset_control_assert(phy->reset);
udelay(10);
reset_control_deassert(phy->reset);
}
return 0;
}
static const struct phy_ops ops = {
.power_on = rockchip_usb_phy_power_on,
.power_off = rockchip_usb_phy_power_off,
.reset = rockchip_usb_phy_reset,
.owner = THIS_MODULE,
};
@ -185,6 +201,10 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base,
return -EINVAL;
}
rk_phy->reset = of_reset_control_get(child, "phy-reset");
if (IS_ERR(rk_phy->reset))
rk_phy->reset = NULL;
rk_phy->reg_offset = reg_offset;
rk_phy->clk = of_clk_get_by_name(child, "phyclk");

154
drivers/phy/phy-sun4i-usb.c
View File

@ -40,6 +40,7 @@
#include <linux/power_supply.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
#include <linux/spinlock.h>
#include <linux/usb/of.h>
#include <linux/workqueue.h>
@ -50,7 +51,7 @@
#define REG_PHYCTL_A33 0x10
#define REG_PHY_UNK_H3 0x20
#define REG_PMU_UNK_H3 0x10
#define REG_PMU_UNK1 0x10
#define PHYCTL_DATA BIT(7)
@ -98,6 +99,7 @@ enum sun4i_usb_phy_type {
sun6i_a31_phy,
sun8i_a33_phy,
sun8i_h3_phy,
sun50i_a64_phy,
};
struct sun4i_usb_phy_cfg {
@ -106,13 +108,14 @@ struct sun4i_usb_phy_cfg {
u32 disc_thresh;
u8 phyctl_offset;
bool dedicated_clocks;
bool enable_pmu_unk1;
};
struct sun4i_usb_phy_data {
void __iomem *base;
const struct sun4i_usb_phy_cfg *cfg;
enum usb_dr_mode dr_mode;
struct mutex mutex;
spinlock_t reg_lock; /* guard access to phyctl reg */
struct sun4i_usb_phy {
struct phy *phy;
void __iomem *pmu;
@ -122,7 +125,6 @@ struct sun4i_usb_phy_data {
bool regulator_on;
int index;
} phys[MAX_PHYS];
int first_phy;
/* phy0 / otg related variables */
struct extcon_dev *extcon;
bool phy0_init;
@ -131,6 +133,7 @@ struct sun4i_usb_phy_data {
struct power_supply *vbus_power_supply;
struct notifier_block vbus_power_nb;
bool vbus_power_nb_registered;
bool force_session_end;
int id_det_irq;
int vbus_det_irq;
int id_det;
@ -179,12 +182,14 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy);
u32 temp, usbc_bit = BIT(phy->index * 2);
void __iomem *phyctl = phy_data->base + phy_data->cfg->phyctl_offset;
unsigned long flags;
int i;
mutex_lock(&phy_data->mutex);
spin_lock_irqsave(&phy_data->reg_lock, flags);
if (phy_data->cfg->type == sun8i_a33_phy) {
/* A33 needs us to set phyctl to 0 explicitly */
if (phy_data->cfg->type == sun8i_a33_phy ||
phy_data->cfg->type == sun50i_a64_phy) {
/* A33 or A64 needs us to set phyctl to 0 explicitly */
writel(0, phyctl);
}
@ -218,7 +223,8 @@ static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data,
data >>= 1;
}
mutex_unlock(&phy_data->mutex);
spin_unlock_irqrestore(&phy_data->reg_lock, flags);
}
static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable)
@ -258,14 +264,16 @@ static int sun4i_usb_phy_init(struct phy *_phy)
return ret;
}
if (data->cfg->enable_pmu_unk1) {
val = readl(phy->pmu + REG_PMU_UNK1);
writel(val & ~2, phy->pmu + REG_PMU_UNK1);
}
if (data->cfg->type == sun8i_h3_phy) {
if (phy->index == 0) {
val = readl(data->base + REG_PHY_UNK_H3);
writel(val & ~1, data->base + REG_PHY_UNK_H3);
}
val = readl(phy->pmu + REG_PMU_UNK_H3);
writel(val & ~2, phy->pmu + REG_PMU_UNK_H3);
} else {
/* Enable USB 45 Ohm resistor calibration */
if (phy->index == 0)
@ -320,7 +328,10 @@ static int sun4i_usb_phy0_get_id_det(struct sun4i_usb_phy_data *data)
{
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
return gpiod_get_value_cansleep(data->id_det_gpio);
if (data->id_det_gpio)
return gpiod_get_value_cansleep(data->id_det_gpio);
else
return 1; /* Fallback to peripheral mode */
case USB_DR_MODE_HOST:
return 0;
case USB_DR_MODE_PERIPHERAL:
@ -382,8 +393,10 @@ static int sun4i_usb_phy_power_on(struct phy *_phy)
/* For phy0 only turn on Vbus if we don't have an ext. Vbus */
if (phy->index == 0 && sun4i_usb_phy0_have_vbus_det(data) &&
data->vbus_det)
data->vbus_det) {
dev_warn(&_phy->dev, "External vbus detected, not enabling our own vbus\n");
return 0;
}
ret = regulator_enable(phy->vbus);
if (ret)
@ -419,6 +432,35 @@ static int sun4i_usb_phy_power_off(struct phy *_phy)
return 0;
}
static int sun4i_usb_phy_set_mode(struct phy *_phy, enum phy_mode mode)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy);
if (phy->index != 0)
return -EINVAL;
switch (mode) {
case PHY_MODE_USB_HOST:
data->dr_mode = USB_DR_MODE_HOST;
break;
case PHY_MODE_USB_DEVICE:
data->dr_mode = USB_DR_MODE_PERIPHERAL;
break;
case PHY_MODE_USB_OTG:
data->dr_mode = USB_DR_MODE_OTG;
break;
default:
return -EINVAL;
}
dev_info(&_phy->dev, "Changing dr_mode to %d\n", (int)data->dr_mode);
data->force_session_end = true;
queue_delayed_work(system_wq, &data->detect, 0);
return 0;
}
void sun4i_usb_phy_set_squelch_detect(struct phy *_phy, bool enabled)
{
struct sun4i_usb_phy *phy = phy_get_drvdata(_phy);
@ -432,6 +474,7 @@ static const struct phy_ops sun4i_usb_phy_ops = {
.exit = sun4i_usb_phy_exit,
.power_on = sun4i_usb_phy_power_on,
.power_off = sun4i_usb_phy_power_off,
.set_mode = sun4i_usb_phy_set_mode,
.owner = THIS_MODULE,
};
@ -440,7 +483,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
struct sun4i_usb_phy_data *data =
container_of(work, struct sun4i_usb_phy_data, detect.work);
struct phy *phy0 = data->phys[0].phy;
int id_det, vbus_det, id_notify = 0, vbus_notify = 0;
bool force_session_end, id_notify = false, vbus_notify = false;
int id_det, vbus_det;
if (phy0 == NULL)
return;
@ -455,27 +499,30 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
return;
}
force_session_end = data->force_session_end;
data->force_session_end = false;
if (id_det != data->id_det) {
/*
* When a host cable (id == 0) gets plugged in on systems
* without vbus detection report vbus low for long enough for
* the musb-ip to end the current device session.
*/
/* id-change, force session end if we've no vbus detection */
if (data->dr_mode == USB_DR_MODE_OTG &&
!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) {
!sun4i_usb_phy0_have_vbus_det(data))
force_session_end = true;
/* When entering host mode (id = 0) force end the session now */
if (force_session_end && id_det == 0) {
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(200);
sun4i_usb_phy0_set_vbus_detect(phy0, 1);
}
sun4i_usb_phy0_set_id_detect(phy0, id_det);
data->id_det = id_det;
id_notify = 1;
id_notify = true;
}
if (vbus_det != data->vbus_det) {
sun4i_usb_phy0_set_vbus_detect(phy0, vbus_det);
data->vbus_det = vbus_det;
vbus_notify = 1;
vbus_notify = true;
}
mutex_unlock(&phy0->mutex);
@ -483,13 +530,8 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work)
if (id_notify) {
extcon_set_cable_state_(data->extcon, EXTCON_USB_HOST,
!id_det);
/*
* When a host cable gets unplugged (id == 1) on systems
* without vbus detection report vbus low for long enough to
* the musb-ip to end the current host session.
*/
if (data->dr_mode == USB_DR_MODE_OTG &&
!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) {
/* When leaving host mode force end the session here */
if (force_session_end && id_det == 1) {
mutex_lock(&phy0->mutex);
sun4i_usb_phy0_set_vbus_detect(phy0, 0);
msleep(1000);
@ -534,8 +576,7 @@ static struct phy *sun4i_usb_phy_xlate(struct device *dev,
{
struct sun4i_usb_phy_data *data = dev_get_drvdata(dev);
if (args->args[0] < data->first_phy ||
args->args[0] >= data->cfg->num_phys)
if (args->args[0] >= data->cfg->num_phys)
return ERR_PTR(-ENODEV);
return data->phys[args->args[0]].phy;
@ -577,7 +618,7 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
if (!data)
return -ENOMEM;
mutex_init(&data->mutex);
spin_lock_init(&data->reg_lock);
INIT_DELAYED_WORK(&data->detect, sun4i_usb_phy0_id_vbus_det_scan);
dev_set_drvdata(dev, data);
data->cfg = of_device_get_match_data(dev);
@ -610,33 +651,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
}
data->dr_mode = of_usb_get_dr_mode_by_phy(np, 0);
switch (data->dr_mode) {
case USB_DR_MODE_OTG:
/* otg without id_det makes no sense, and is not supported */
if (!data->id_det_gpio) {
dev_err(dev, "usb0_id_det missing or invalid\n");
return -ENODEV;
}
/* fall through */
case USB_DR_MODE_HOST:
case USB_DR_MODE_PERIPHERAL:
data->extcon = devm_extcon_dev_allocate(dev,
sun4i_usb_phy0_cable);
if (IS_ERR(data->extcon))
return PTR_ERR(data->extcon);
ret = devm_extcon_dev_register(dev, data->extcon);
if (ret) {
dev_err(dev, "failed to register extcon: %d\n", ret);
return ret;
}
break;
default:
dev_info(dev, "dr_mode unknown, not registering usb phy0\n");
data->first_phy = 1;
data->extcon = devm_extcon_dev_allocate(dev, sun4i_usb_phy0_cable);
if (IS_ERR(data->extcon))
return PTR_ERR(data->extcon);
ret = devm_extcon_dev_register(dev, data->extcon);
if (ret) {
dev_err(dev, "failed to register extcon: %d\n", ret);
return ret;
}
for (i = data->first_phy; i < data->cfg->num_phys; i++) {
for (i = 0; i < data->cfg->num_phys; i++) {
struct sun4i_usb_phy *phy = data->phys + i;
char name[16];
@ -737,6 +763,7 @@ static const struct sun4i_usb_phy_cfg sun4i_a10_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
@ -745,6 +772,7 @@ static const struct sun4i_usb_phy_cfg sun5i_a13_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
@ -753,6 +781,7 @@ static const struct sun4i_usb_phy_cfg sun6i_a31_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
@ -761,6 +790,7 @@ static const struct sun4i_usb_phy_cfg sun7i_a20_cfg = {
.disc_thresh = 2,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = false,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
@ -769,6 +799,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a23_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A10,
.dedicated_clocks = true,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
@ -777,6 +808,7 @@ static const struct sun4i_usb_phy_cfg sun8i_a33_cfg = {
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = false,
};
static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
@ -784,6 +816,16 @@ static const struct sun4i_usb_phy_cfg sun8i_h3_cfg = {
.type = sun8i_h3_phy,
.disc_thresh = 3,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
};
static const struct sun4i_usb_phy_cfg sun50i_a64_cfg = {
.num_phys = 2,
.type = sun50i_a64_phy,
.disc_thresh = 3,
.phyctl_offset = REG_PHYCTL_A33,
.dedicated_clocks = true,
.enable_pmu_unk1 = true,
};
static const struct of_device_id sun4i_usb_phy_of_match[] = {
@ -794,6 +836,8 @@ static const struct of_device_id sun4i_usb_phy_of_match[] = {
{ .compatible = "allwinner,sun8i-a23-usb-phy", .data = &sun8i_a23_cfg },
{ .compatible = "allwinner,sun8i-a33-usb-phy", .data = &sun8i_a33_cfg },
{ .compatible = "allwinner,sun8i-h3-usb-phy", .data = &sun8i_h3_cfg },
{ .compatible = "allwinner,sun50i-a64-usb-phy",
.data = &sun50i_a64_cfg},
{ },
};
MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match);

25
drivers/phy/phy-twl4030-usb.c
View File

@ -172,6 +172,7 @@ struct twl4030_usb {
int irq;
enum musb_vbus_id_status linkstat;
bool vbus_supplied;
bool musb_mailbox_pending;
struct delayed_work id_workaround_work;
};
@ -439,6 +440,17 @@ static int __maybe_unused twl4030_usb_runtime_resume(struct device *dev)
(PHY_CLK_CTRL_CLOCKGATING_EN |
PHY_CLK_CTRL_CLK32K_EN));
twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
twl4030_i2c_access(twl, 0);
/*
* According to the TPS65950 TRM, there has to be at least 50ms
* delay between setting POWER_CTRL_OTG_ENAB and enabling charging
* so wait here so that a fully enabled phy can be expected after
* resume
*/
msleep(50);
return 0;
}
@ -459,11 +471,6 @@ static int twl4030_phy_power_on(struct phy *phy)
dev_dbg(twl->dev, "%s\n", __func__);
pm_runtime_get_sync(twl->dev);
twl4030_i2c_access(twl, 1);
twl4030_usb_set_mode(twl, twl->usb_mode);
if (twl->usb_mode == T2_USB_MODE_ULPI)
twl4030_i2c_access(twl, 0);
twl->linkstat = MUSB_UNKNOWN;
schedule_delayed_work(&twl->id_workaround_work, HZ);
return 0;
@ -569,9 +576,12 @@ static irqreturn_t twl4030_usb_irq(int irq, void *_twl)
pm_runtime_mark_last_busy(twl->dev);
pm_runtime_put_autosuspend(twl->dev);
}
twl->musb_mailbox_pending = true;
}
if (twl->musb_mailbox_pending) {
err = musb_mailbox(status);
if (err)
twl->linkstat = MUSB_UNKNOWN;
if (!err)
twl->musb_mailbox_pending = false;
}
/* don't schedule during sleep - irq works right then */
@ -676,6 +686,7 @@ static int twl4030_usb_probe(struct platform_device *pdev)
twl->irq = platform_get_irq(pdev, 0);
twl->vbus_supplied = false;
twl->linkstat = MUSB_UNKNOWN;
twl->musb_mailbox_pending = false;
twl->phy.dev = twl->dev;
twl->phy.label = "twl4030";

4
drivers/phy/tegra/xusb.c
View File

@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/phy/tegra/xusb.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/reset.h>
@ -101,7 +102,8 @@ tegra_xusb_pad_find_phy_node(struct tegra_xusb_pad *pad, unsigned int index)
return of_find_node_by_name(np, pad->soc->lanes[index].name);
}
int tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
static int
tegra_xusb_lane_lookup_function(struct tegra_xusb_lane *lane,
const char *function)
{
unsigned int i;

30
include/linux/extcon.h
View File

@ -249,7 +249,6 @@ extern int extcon_set_state(struct extcon_dev *edev, unsigned int id,
bool cable_state);
extern int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id,
bool cable_state);
/*
* Synchronize the state and property data for a specific external connector.
*/
@ -359,6 +358,8 @@ static inline int extcon_set_state_sync(struct extcon_dev *edev, unsigned int id
}
static inline int extcon_sync(struct extcon_dev *edev, unsigned int id)
<<<<<<< HEAD
=======
{
return 0;
}
@ -372,23 +373,50 @@ static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value prop_val)
>>>>>>> next
{
return 0;
}
<<<<<<< HEAD
static inline int extcon_get_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
union extcon_property_value *prop_val)
{
return 0;
}
static inline int extcon_set_property(struct extcon_dev *edev, unsigned int id,
unsigned int prop,
=======
static inline int extcon_set_property_sync(struct extcon_dev *edev,
unsigned int id, unsigned int prop,
>>>>>>> next
union extcon_property_value prop_val)
{
return 0;
}
<<<<<<< HEAD
static inline int extcon_set_property_sync(struct extcon_dev *edev,
unsigned int id, unsigned int prop,
union extcon_property_value prop_val)
=======
static inline int extcon_get_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop)
>>>>>>> next
{
return 0;
}
<<<<<<< HEAD
static inline int extcon_get_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop)
{
return 0;
}
=======
>>>>>>> next
static inline int extcon_set_property_capability(struct extcon_dev *edev,
unsigned int id, unsigned int prop)
{

3
include/linux/phy/phy.h
View File

@ -36,6 +36,7 @@ enum phy_mode {
* @power_on: powering on the phy
* @power_off: powering off the phy
* @set_mode: set the mode of the phy
* @reset: resetting the phy
* @owner: the module owner containing the ops
*/
struct phy_ops {
@ -44,6 +45,7 @@ struct phy_ops {
int (*power_on)(struct phy *phy);
int (*power_off)(struct phy *phy);
int (*set_mode)(struct phy *phy, enum phy_mode mode);
int (*reset)(struct phy *phy);
struct module *owner;
};
@ -136,6 +138,7 @@ int phy_exit(struct phy *phy);
int phy_power_on(struct phy *phy);
int phy_power_off(struct phy *phy);
int phy_set_mode(struct phy *phy, enum phy_mode mode);
int phy_reset(struct phy *phy);
static inline int phy_get_bus_width(struct phy *phy)
{
return phy->attrs.bus_width;