x86: Fix APIC ID sizing bug on larger systems, clean up MAX_APICS confusion

Found one x2apic pre-enabled system, x2apic_mode suddenly get
corrupted after register some cpus, when compiled
CONFIG_NR_CPUS=255 instead of 512.

It turns out that generic_processor_info() ==> phyid_set(apicid,
phys_cpu_present_map) causes the problem.

phys_cpu_present_map is sized by MAX_APICS bits, and pre-enabled
system some cpus have an apic id > 255.

The variable after phys_cpu_present_map may get corrupted
silently:

 ffffffff828e8420 B phys_cpu_present_map
 ffffffff828e8440 B apic_verbosity
 ffffffff828e8444 B local_apic_timer_c2_ok
 ffffffff828e8448 B disable_apic
 ffffffff828e844c B x2apic_mode
 ffffffff828e8450 B x2apic_disabled
 ffffffff828e8454 B num_processors
 ...

Actually phys_cpu_present_map is referenced via apic id, instead
index. We should use MAX_LOCAL_APIC instead MAX_APICS.

For 64-bit it will be 32768 in all cases. BSS will increase by 4k bytes
on 64-bit:

	text		data		bss		dec		filename
	21696943	4193748		12787712	38678403	vmlinux.before
	21696943	4193748		12791808	38682499	vmlinux.after

No change on 32bit.

Finally we can remove MAX_APCIS that was rather confusing.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: H. Peter Anvin <hpa@linux.intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
LKML-Reference: <4D23BD9C.3070102@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

arch/x86/include/asm/mpspec.h

@@ -5,6 +5,7 @@
 
 #include <asm/mpspec_def.h>
 #include <asm/x86_init.h>
+#include <asm/apicdef.h>
 
 extern int apic_version[];
 extern int pic_mode;
@@ -107,7 +108,7 @@ extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
 				 int active_high_low);
 #endif /* CONFIG_ACPI */
 
-#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_APICS)
+#define PHYSID_ARRAY_SIZE	BITS_TO_LONGS(MAX_LOCAL_APIC)
 
 struct physid_mask {
 	unsigned long mask[PHYSID_ARRAY_SIZE];
@@ -122,31 +123,31 @@ typedef struct physid_mask physid_mask_t;
 	test_and_set_bit(physid, (map).mask)
 
 #define physids_and(dst, src1, src2)					\
-	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+	bitmap_and((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC)
 
 #define physids_or(dst, src1, src2)					\
-	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_APICS)
+	bitmap_or((dst).mask, (src1).mask, (src2).mask, MAX_LOCAL_APIC)
 
 #define physids_clear(map)					\
-	bitmap_zero((map).mask, MAX_APICS)
+	bitmap_zero((map).mask, MAX_LOCAL_APIC)
 
 #define physids_complement(dst, src)				\
-	bitmap_complement((dst).mask, (src).mask, MAX_APICS)
+	bitmap_complement((dst).mask, (src).mask, MAX_LOCAL_APIC)
 
 #define physids_empty(map)					\
-	bitmap_empty((map).mask, MAX_APICS)
+	bitmap_empty((map).mask, MAX_LOCAL_APIC)
 
 #define physids_equal(map1, map2)				\
-	bitmap_equal((map1).mask, (map2).mask, MAX_APICS)
+	bitmap_equal((map1).mask, (map2).mask, MAX_LOCAL_APIC)
 
 #define physids_weight(map)					\
-	bitmap_weight((map).mask, MAX_APICS)
+	bitmap_weight((map).mask, MAX_LOCAL_APIC)
 
 #define physids_shift_right(d, s, n)				\
-	bitmap_shift_right((d).mask, (s).mask, n, MAX_APICS)
+	bitmap_shift_right((d).mask, (s).mask, n, MAX_LOCAL_APIC)
 
 #define physids_shift_left(d, s, n)				\
-	bitmap_shift_left((d).mask, (s).mask, n, MAX_APICS)
+	bitmap_shift_left((d).mask, (s).mask, n, MAX_LOCAL_APIC)
 
 static inline unsigned long physids_coerce(physid_mask_t *map)
 {
@@ -159,14 +160,6 @@ static inline void physids_promote(unsigned long physids, physid_mask_t *map)
 	map->mask[0] = physids;
 }
 
-/* Note: will create very large stack frames if physid_mask_t is big */
-#define physid_mask_of_physid(physid)					\
-	({								\
-		physid_mask_t __physid_mask = PHYSID_MASK_NONE;		\
-		physid_set(physid, __physid_mask);			\
-		__physid_mask;						\
-	})
-
 static inline void physid_set_mask_of_physid(int physid, physid_mask_t *map)
 {
 	physids_clear(*map);

arch/x86/include/asm/mpspec_def.h

@@ -15,13 +15,6 @@
 
 #ifdef CONFIG_X86_32
 # define MAX_MPC_ENTRY 1024
-# define MAX_APICS      256
-#else
-# if NR_CPUS <= 255
-#  define MAX_APICS     255
-# else
-#  define MAX_APICS   32768
-# endif
 #endif
 
 /* Intel MP Floating Pointer Structure */

arch/x86/kernel/acpi/boot.c

@@ -915,13 +915,13 @@ static int __init acpi_parse_madt_lapic_entries(void)
 	acpi_register_lapic_address(acpi_lapic_addr);
 
 	count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
-				      acpi_parse_sapic, MAX_APICS);
+				      acpi_parse_sapic, MAX_LOCAL_APIC);
 
 	if (!count) {
 		x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC,
-						acpi_parse_x2apic, MAX_APICS);
+					acpi_parse_x2apic, MAX_LOCAL_APIC);
 		count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC,
-					      acpi_parse_lapic, MAX_APICS);
+					acpi_parse_lapic, MAX_LOCAL_APIC);
 	}
 	if (!count && !x2count) {
 		printk(KERN_ERR PREFIX "No LAPIC entries present\n");

arch/x86/kernel/apic/io_apic.c

@@ -4109,7 +4109,8 @@ void __init pre_init_apic_IRQ0(void)
 
 	printk(KERN_INFO "Early APIC setup for system timer0\n");
 #ifndef CONFIG_SMP
-	phys_cpu_present_map = physid_mask_of_physid(boot_cpu_physical_apicid);
+	physid_set_mask_of_physid(boot_cpu_physical_apicid,
+					 &phys_cpu_present_map);
 #endif
 	/* Make sure the irq descriptor is set up */
 	cfg = alloc_irq_and_cfg_at(0, 0);

arch/x86/platform/sfi/sfi.c

@@ -48,9 +48,9 @@ static void __init mp_sfi_register_lapic_address(unsigned long address)
 /* All CPUs enumerated by SFI must be present and enabled */
 static void __cpuinit mp_sfi_register_lapic(u8 id)
 {
-	if (MAX_APICS - id <= 0) {
+	if (MAX_LOCAL_APIC - id <= 0) {
 		pr_warning("Processor #%d invalid (max %d)\n",
-			id, MAX_APICS);
+			id, MAX_LOCAL_APIC);
 		return;
 	}
 

arch/x86/platform/visws/visws_quirks.c

@@ -171,7 +171,7 @@ static void __init MP_processor_info(struct mpc_cpu *m)
 	ver = m->apicver;
 	if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
 		printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
-			m->apicid, MAX_APICS);
+			m->apicid, MAX_LOCAL_APIC);
 		return;
 	}