spi: atmel-quadspi: Fix AHB memory accesses
Following error was seen when mounting a 16MByte ubifs:
UBIFS error (ubi0:0 pid 1893): check_lpt_type.constprop.6: invalid type (15) in LPT node type
QSPI_IFR.TFRTYP was not set correctly. When data transfer is enabled
and one wants to access the serial memory through AHB in order to:
- read in the serial memory, but not a memory data, for example
a JEDEC-ID, QSPI_IFR.TFRTYP must be written to '0' (both sama5d2
and sam9x60).
- read in the serial memory, and particularly a memory data,
TFRTYP must be written to '1' (both sama5d2 and sam9x60).
- write in the serial memory, but not a memory data, for example
writing the configuration or the QSPI_SR, TFRTYP must be written
to '2' for sama5d2 and to '0' for sam9x60.
- write in the serial memory in particular to program a memory data,
TFRTYP must be written to '3' for sama5d2 and to '1' for sam9x60.
Fix the setting of the QSPI_IFR.TFRTYP field.
Fixes: 2d30ac5ed6
("mtd: spi-nor: atmel-quadspi: Use spi-mem interface for atmel-quadspi driver")
Cc: <stable@vger.kernel.org> # v5.0+
Reported-by: Tom Burkart <tom@aussec.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201207135959.154124-2-tudor.ambarus@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
parent
3650b228f8
commit
cac8c82105
|
@ -365,10 +365,14 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
|
|||
if (dummy_cycles)
|
||||
ifr |= QSPI_IFR_NBDUM(dummy_cycles);
|
||||
|
||||
/* Set data enable */
|
||||
if (op->data.nbytes)
|
||||
/* Set data enable and data transfer type. */
|
||||
if (op->data.nbytes) {
|
||||
ifr |= QSPI_IFR_DATAEN;
|
||||
|
||||
if (op->addr.nbytes)
|
||||
ifr |= QSPI_IFR_TFRTYP_MEM;
|
||||
}
|
||||
|
||||
/*
|
||||
* If the QSPI controller is set in regular SPI mode, set it in
|
||||
* Serial Memory Mode (SMM).
|
||||
|
@ -393,7 +397,7 @@ static int atmel_qspi_set_cfg(struct atmel_qspi *aq,
|
|||
atmel_qspi_write(icr, aq, QSPI_WICR);
|
||||
atmel_qspi_write(ifr, aq, QSPI_IFR);
|
||||
} else {
|
||||
if (op->data.dir == SPI_MEM_DATA_OUT)
|
||||
if (op->data.nbytes && op->data.dir == SPI_MEM_DATA_OUT)
|
||||
ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
|
||||
|
||||
/* Set QSPI Instruction Frame registers */
|
||||
|
|
Loading…
Reference in New Issue