From c77fd0a42b24acc2d6cc466e73dcb67d50177df6 Mon Sep 17 00:00:00 2001 From: Matt Ranostay Date: Fri, 31 Oct 2014 20:00:13 -0700 Subject: [PATCH] Input: rename cap1106 driver to cap11xx There are several devices in cap11xx family besides cap1106. The driver can be made to support all of them, so let's give it more generic name. Signed-off-by: Matt Ranostay Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov --- .../input/{cap1106.txt => cap11xx.txt} | 19 +- drivers/input/keyboard/Kconfig | 8 +- drivers/input/keyboard/Makefile | 2 +- drivers/input/keyboard/cap1106.c | 341 ------------------ drivers/input/keyboard/cap11xx.c | 340 +++++++++++++++++ 5 files changed, 355 insertions(+), 355 deletions(-) rename Documentation/devicetree/bindings/input/{cap1106.txt => cap11xx.txt} (74%) delete mode 100644 drivers/input/keyboard/cap1106.c create mode 100644 drivers/input/keyboard/cap11xx.c diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap11xx.txt similarity index 74% rename from Documentation/devicetree/bindings/input/cap1106.txt rename to Documentation/devicetree/bindings/input/cap11xx.txt index 4b463904cba0..51649203658a 100644 --- a/Documentation/devicetree/bindings/input/cap1106.txt +++ b/Documentation/devicetree/bindings/input/cap11xx.txt @@ -1,11 +1,12 @@ -Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor +Device tree bindings for Microchip CAP11xx based capacitive touch sensors -The node for this driver must be a child of a I2C controller node, as the +The node for this device must be a child of a I2C controller node, as the device communication via I2C only. Required properties: - compatible: Must be "microchip,cap1106" + compatible: Must contain one of: + "microchip,cap1106" reg: The I2C slave address of the device. Only 0x28 is valid. @@ -43,11 +44,11 @@ i2c_controller { autorepeat; microchip,sensor-gain = <2>; - linux,keycodes = <103 /* KEY_UP */ - 106 /* KEY_RIGHT */ - 108 /* KEY_DOWN */ - 105 /* KEY_LEFT */ - 109 /* KEY_PAGEDOWN */ - 104>; /* KEY_PAGEUP */ + linux,keycodes = <103>, /* KEY_UP */ + <106>, /* KEY_RIGHT */ + <108>, /* KEY_DOWN */ + <105>, /* KEY_LEFT */ + <109>, /* KEY_PAGEDOWN */ + <104>; /* KEY_PAGEUP */ }; } diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a3958c63d7d5..96ee26c555e0 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -665,14 +665,14 @@ config KEYBOARD_CROS_EC To compile this driver as a module, choose M here: the module will be called cros_ec_keyb. -config KEYBOARD_CAP1106 - tristate "Microchip CAP1106 touch sensor" +config KEYBOARD_CAP11XX + tristate "Microchip CAP11XX based touch sensors" depends on OF && I2C select REGMAP_I2C help - Say Y here to enable the CAP1106 touch sensor driver. + Say Y here to enable the CAP11XX touch sensor driver. To compile this driver as a module, choose M here: the - module will be called cap1106. + module will be called cap11xx. endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 0a3345634d79..febafa527eb6 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -11,7 +11,7 @@ obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o -obj-$(CONFIG_KEYBOARD_CAP1106) += cap1106.o +obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o diff --git a/drivers/input/keyboard/cap1106.c b/drivers/input/keyboard/cap1106.c deleted file mode 100644 index d70b65a14ced..000000000000 --- a/drivers/input/keyboard/cap1106.c +++ /dev/null @@ -1,341 +0,0 @@ -/* - * Input driver for Microchip CAP1106, 6 channel capacitive touch sensor - * - * http://www.microchip.com/wwwproducts/Devices.aspx?product=CAP1106 - * - * (c) 2014 Daniel Mack - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#define CAP1106_REG_MAIN_CONTROL 0x00 -#define CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT (6) -#define CAP1106_REG_MAIN_CONTROL_GAIN_MASK (0xc0) -#define CAP1106_REG_MAIN_CONTROL_DLSEEP BIT(4) -#define CAP1106_REG_GENERAL_STATUS 0x02 -#define CAP1106_REG_SENSOR_INPUT 0x03 -#define CAP1106_REG_NOISE_FLAG_STATUS 0x0a -#define CAP1106_REG_SENOR_DELTA(X) (0x10 + (X)) -#define CAP1106_REG_SENSITIVITY_CONTROL 0x1f -#define CAP1106_REG_CONFIG 0x20 -#define CAP1106_REG_SENSOR_ENABLE 0x21 -#define CAP1106_REG_SENSOR_CONFIG 0x22 -#define CAP1106_REG_SENSOR_CONFIG2 0x23 -#define CAP1106_REG_SAMPLING_CONFIG 0x24 -#define CAP1106_REG_CALIBRATION 0x26 -#define CAP1106_REG_INT_ENABLE 0x27 -#define CAP1106_REG_REPEAT_RATE 0x28 -#define CAP1106_REG_MT_CONFIG 0x2a -#define CAP1106_REG_MT_PATTERN_CONFIG 0x2b -#define CAP1106_REG_MT_PATTERN 0x2d -#define CAP1106_REG_RECALIB_CONFIG 0x2f -#define CAP1106_REG_SENSOR_THRESH(X) (0x30 + (X)) -#define CAP1106_REG_SENSOR_NOISE_THRESH 0x38 -#define CAP1106_REG_STANDBY_CHANNEL 0x40 -#define CAP1106_REG_STANDBY_CONFIG 0x41 -#define CAP1106_REG_STANDBY_SENSITIVITY 0x42 -#define CAP1106_REG_STANDBY_THRESH 0x43 -#define CAP1106_REG_CONFIG2 0x44 -#define CAP1106_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) -#define CAP1106_REG_SENSOR_CALIB (0xb1 + (X)) -#define CAP1106_REG_SENSOR_CALIB_LSB1 0xb9 -#define CAP1106_REG_SENSOR_CALIB_LSB2 0xba -#define CAP1106_REG_PRODUCT_ID 0xfd -#define CAP1106_REG_MANUFACTURER_ID 0xfe -#define CAP1106_REG_REVISION 0xff - -#define CAP1106_NUM_CHN 6 -#define CAP1106_PRODUCT_ID 0x55 -#define CAP1106_MANUFACTURER_ID 0x5d - -struct cap1106_priv { - struct regmap *regmap; - struct input_dev *idev; - - /* config */ - unsigned short keycodes[CAP1106_NUM_CHN]; -}; - -static const struct reg_default cap1106_reg_defaults[] = { - { CAP1106_REG_MAIN_CONTROL, 0x00 }, - { CAP1106_REG_GENERAL_STATUS, 0x00 }, - { CAP1106_REG_SENSOR_INPUT, 0x00 }, - { CAP1106_REG_NOISE_FLAG_STATUS, 0x00 }, - { CAP1106_REG_SENSITIVITY_CONTROL, 0x2f }, - { CAP1106_REG_CONFIG, 0x20 }, - { CAP1106_REG_SENSOR_ENABLE, 0x3f }, - { CAP1106_REG_SENSOR_CONFIG, 0xa4 }, - { CAP1106_REG_SENSOR_CONFIG2, 0x07 }, - { CAP1106_REG_SAMPLING_CONFIG, 0x39 }, - { CAP1106_REG_CALIBRATION, 0x00 }, - { CAP1106_REG_INT_ENABLE, 0x3f }, - { CAP1106_REG_REPEAT_RATE, 0x3f }, - { CAP1106_REG_MT_CONFIG, 0x80 }, - { CAP1106_REG_MT_PATTERN_CONFIG, 0x00 }, - { CAP1106_REG_MT_PATTERN, 0x3f }, - { CAP1106_REG_RECALIB_CONFIG, 0x8a }, - { CAP1106_REG_SENSOR_THRESH(0), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(1), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(2), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(3), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(4), 0x40 }, - { CAP1106_REG_SENSOR_THRESH(5), 0x40 }, - { CAP1106_REG_SENSOR_NOISE_THRESH, 0x01 }, - { CAP1106_REG_STANDBY_CHANNEL, 0x00 }, - { CAP1106_REG_STANDBY_CONFIG, 0x39 }, - { CAP1106_REG_STANDBY_SENSITIVITY, 0x02 }, - { CAP1106_REG_STANDBY_THRESH, 0x40 }, - { CAP1106_REG_CONFIG2, 0x40 }, - { CAP1106_REG_SENSOR_CALIB_LSB1, 0x00 }, - { CAP1106_REG_SENSOR_CALIB_LSB2, 0x00 }, -}; - -static bool cap1106_volatile_reg(struct device *dev, unsigned int reg) -{ - switch (reg) { - case CAP1106_REG_MAIN_CONTROL: - case CAP1106_REG_SENSOR_INPUT: - case CAP1106_REG_SENOR_DELTA(0): - case CAP1106_REG_SENOR_DELTA(1): - case CAP1106_REG_SENOR_DELTA(2): - case CAP1106_REG_SENOR_DELTA(3): - case CAP1106_REG_SENOR_DELTA(4): - case CAP1106_REG_SENOR_DELTA(5): - case CAP1106_REG_PRODUCT_ID: - case CAP1106_REG_MANUFACTURER_ID: - case CAP1106_REG_REVISION: - return true; - } - - return false; -} - -static const struct regmap_config cap1106_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - - .max_register = CAP1106_REG_REVISION, - .reg_defaults = cap1106_reg_defaults, - - .num_reg_defaults = ARRAY_SIZE(cap1106_reg_defaults), - .cache_type = REGCACHE_RBTREE, - .volatile_reg = cap1106_volatile_reg, -}; - -static irqreturn_t cap1106_thread_func(int irq_num, void *data) -{ - struct cap1106_priv *priv = data; - unsigned int status; - int ret, i; - - /* - * Deassert interrupt. This needs to be done before reading the status - * registers, which will not carry valid values otherwise. - */ - ret = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, 1, 0); - if (ret < 0) - goto out; - - ret = regmap_read(priv->regmap, CAP1106_REG_SENSOR_INPUT, &status); - if (ret < 0) - goto out; - - for (i = 0; i < CAP1106_NUM_CHN; i++) - input_report_key(priv->idev, priv->keycodes[i], - status & (1 << i)); - - input_sync(priv->idev); - -out: - return IRQ_HANDLED; -} - -static int cap1106_set_sleep(struct cap1106_priv *priv, bool sleep) -{ - return regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, - CAP1106_REG_MAIN_CONTROL_DLSEEP, - sleep ? CAP1106_REG_MAIN_CONTROL_DLSEEP : 0); -} - -static int cap1106_input_open(struct input_dev *idev) -{ - struct cap1106_priv *priv = input_get_drvdata(idev); - - return cap1106_set_sleep(priv, false); -} - -static void cap1106_input_close(struct input_dev *idev) -{ - struct cap1106_priv *priv = input_get_drvdata(idev); - - cap1106_set_sleep(priv, true); -} - -static int cap1106_i2c_probe(struct i2c_client *i2c_client, - const struct i2c_device_id *id) -{ - struct device *dev = &i2c_client->dev; - struct cap1106_priv *priv; - struct device_node *node; - int i, error, irq, gain = 0; - unsigned int val, rev; - u32 gain32, keycodes[CAP1106_NUM_CHN]; - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->regmap = devm_regmap_init_i2c(i2c_client, &cap1106_regmap_config); - if (IS_ERR(priv->regmap)) - return PTR_ERR(priv->regmap); - - error = regmap_read(priv->regmap, CAP1106_REG_PRODUCT_ID, &val); - if (error) - return error; - - if (val != CAP1106_PRODUCT_ID) { - dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", - val, CAP1106_PRODUCT_ID); - return -ENODEV; - } - - error = regmap_read(priv->regmap, CAP1106_REG_MANUFACTURER_ID, &val); - if (error) - return error; - - if (val != CAP1106_MANUFACTURER_ID) { - dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", - val, CAP1106_MANUFACTURER_ID); - return -ENODEV; - } - - error = regmap_read(priv->regmap, CAP1106_REG_REVISION, &rev); - if (error < 0) - return error; - - dev_info(dev, "CAP1106 detected, revision 0x%02x\n", rev); - i2c_set_clientdata(i2c_client, priv); - node = dev->of_node; - - if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { - if (is_power_of_2(gain32) && gain32 <= 8) - gain = ilog2(gain32); - else - dev_err(dev, "Invalid sensor-gain value %d\n", gain32); - } - - BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); - - /* Provide some useful defaults */ - for (i = 0; i < ARRAY_SIZE(keycodes); i++) - keycodes[i] = KEY_A + i; - - of_property_read_u32_array(node, "linux,keycodes", - keycodes, ARRAY_SIZE(keycodes)); - - for (i = 0; i < ARRAY_SIZE(keycodes); i++) - priv->keycodes[i] = keycodes[i]; - - error = regmap_update_bits(priv->regmap, CAP1106_REG_MAIN_CONTROL, - CAP1106_REG_MAIN_CONTROL_GAIN_MASK, - gain << CAP1106_REG_MAIN_CONTROL_GAIN_SHIFT); - if (error) - return error; - - /* Disable autorepeat. The Linux input system has its own handling. */ - error = regmap_write(priv->regmap, CAP1106_REG_REPEAT_RATE, 0); - if (error) - return error; - - priv->idev = devm_input_allocate_device(dev); - if (!priv->idev) - return -ENOMEM; - - priv->idev->name = "CAP1106 capacitive touch sensor"; - priv->idev->id.bustype = BUS_I2C; - priv->idev->evbit[0] = BIT_MASK(EV_KEY); - - if (of_property_read_bool(node, "autorepeat")) - __set_bit(EV_REP, priv->idev->evbit); - - for (i = 0; i < CAP1106_NUM_CHN; i++) - __set_bit(priv->keycodes[i], priv->idev->keybit); - - __clear_bit(KEY_RESERVED, priv->idev->keybit); - - priv->idev->keycode = priv->keycodes; - priv->idev->keycodesize = sizeof(priv->keycodes[0]); - priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes); - - priv->idev->id.vendor = CAP1106_MANUFACTURER_ID; - priv->idev->id.product = CAP1106_PRODUCT_ID; - priv->idev->id.version = rev; - - priv->idev->open = cap1106_input_open; - priv->idev->close = cap1106_input_close; - - input_set_drvdata(priv->idev, priv); - - /* - * Put the device in deep sleep mode for now. - * ->open() will bring it back once the it is actually needed. - */ - cap1106_set_sleep(priv, true); - - error = input_register_device(priv->idev); - if (error) - return error; - - irq = irq_of_parse_and_map(node, 0); - if (!irq) { - dev_err(dev, "Unable to parse or map IRQ\n"); - return -ENXIO; - } - - error = devm_request_threaded_irq(dev, irq, NULL, cap1106_thread_func, - IRQF_ONESHOT, dev_name(dev), priv); - if (error) - return error; - - return 0; -} - -static const struct of_device_id cap1106_dt_ids[] = { - { .compatible = "microchip,cap1106", }, - {} -}; -MODULE_DEVICE_TABLE(of, cap1106_dt_ids); - -static const struct i2c_device_id cap1106_i2c_ids[] = { - { "cap1106", 0 }, - {} -}; -MODULE_DEVICE_TABLE(i2c, cap1106_i2c_ids); - -static struct i2c_driver cap1106_i2c_driver = { - .driver = { - .name = "cap1106", - .owner = THIS_MODULE, - .of_match_table = cap1106_dt_ids, - }, - .id_table = cap1106_i2c_ids, - .probe = cap1106_i2c_probe, -}; - -module_i2c_driver(cap1106_i2c_driver); - -MODULE_ALIAS("platform:cap1106"); -MODULE_DESCRIPTION("Microchip CAP1106 driver"); -MODULE_AUTHOR("Daniel Mack "); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c new file mode 100644 index 000000000000..0da2e838e788 --- /dev/null +++ b/drivers/input/keyboard/cap11xx.c @@ -0,0 +1,340 @@ +/* + * Input driver for Microchip CAP11xx based capacitive touch sensors + * + * + * (c) 2014 Daniel Mack + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#define CAP11XX_REG_MAIN_CONTROL 0x00 +#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6) +#define CAP11XX_REG_MAIN_CONTROL_GAIN_MASK (0xc0) +#define CAP11XX_REG_MAIN_CONTROL_DLSEEP BIT(4) +#define CAP11XX_REG_GENERAL_STATUS 0x02 +#define CAP11XX_REG_SENSOR_INPUT 0x03 +#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a +#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X)) +#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f +#define CAP11XX_REG_CONFIG 0x20 +#define CAP11XX_REG_SENSOR_ENABLE 0x21 +#define CAP11XX_REG_SENSOR_CONFIG 0x22 +#define CAP11XX_REG_SENSOR_CONFIG2 0x23 +#define CAP11XX_REG_SAMPLING_CONFIG 0x24 +#define CAP11XX_REG_CALIBRATION 0x26 +#define CAP11XX_REG_INT_ENABLE 0x27 +#define CAP11XX_REG_REPEAT_RATE 0x28 +#define CAP11XX_REG_MT_CONFIG 0x2a +#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b +#define CAP11XX_REG_MT_PATTERN 0x2d +#define CAP11XX_REG_RECALIB_CONFIG 0x2f +#define CAP11XX_REG_SENSOR_THRESH(X) (0x30 + (X)) +#define CAP11XX_REG_SENSOR_NOISE_THRESH 0x38 +#define CAP11XX_REG_STANDBY_CHANNEL 0x40 +#define CAP11XX_REG_STANDBY_CONFIG 0x41 +#define CAP11XX_REG_STANDBY_SENSITIVITY 0x42 +#define CAP11XX_REG_STANDBY_THRESH 0x43 +#define CAP11XX_REG_CONFIG2 0x44 +#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X)) +#define CAP11XX_REG_SENSOR_CALIB (0xb1 + (X)) +#define CAP11XX_REG_SENSOR_CALIB_LSB1 0xb9 +#define CAP11XX_REG_SENSOR_CALIB_LSB2 0xba +#define CAP11XX_REG_PRODUCT_ID 0xfd +#define CAP11XX_REG_MANUFACTURER_ID 0xfe +#define CAP11XX_REG_REVISION 0xff + +#define CAP11XX_NUM_CHN 6 +#define CAP11XX_PRODUCT_ID 0x55 +#define CAP11XX_MANUFACTURER_ID 0x5d + +struct cap11xx_priv { + struct regmap *regmap; + struct input_dev *idev; + + /* config */ + unsigned short keycodes[CAP11XX_NUM_CHN]; +}; + +static const struct reg_default cap11xx_reg_defaults[] = { + { CAP11XX_REG_MAIN_CONTROL, 0x00 }, + { CAP11XX_REG_GENERAL_STATUS, 0x00 }, + { CAP11XX_REG_SENSOR_INPUT, 0x00 }, + { CAP11XX_REG_NOISE_FLAG_STATUS, 0x00 }, + { CAP11XX_REG_SENSITIVITY_CONTROL, 0x2f }, + { CAP11XX_REG_CONFIG, 0x20 }, + { CAP11XX_REG_SENSOR_ENABLE, 0x3f }, + { CAP11XX_REG_SENSOR_CONFIG, 0xa4 }, + { CAP11XX_REG_SENSOR_CONFIG2, 0x07 }, + { CAP11XX_REG_SAMPLING_CONFIG, 0x39 }, + { CAP11XX_REG_CALIBRATION, 0x00 }, + { CAP11XX_REG_INT_ENABLE, 0x3f }, + { CAP11XX_REG_REPEAT_RATE, 0x3f }, + { CAP11XX_REG_MT_CONFIG, 0x80 }, + { CAP11XX_REG_MT_PATTERN_CONFIG, 0x00 }, + { CAP11XX_REG_MT_PATTERN, 0x3f }, + { CAP11XX_REG_RECALIB_CONFIG, 0x8a }, + { CAP11XX_REG_SENSOR_THRESH(0), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(1), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(2), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(3), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(4), 0x40 }, + { CAP11XX_REG_SENSOR_THRESH(5), 0x40 }, + { CAP11XX_REG_SENSOR_NOISE_THRESH, 0x01 }, + { CAP11XX_REG_STANDBY_CHANNEL, 0x00 }, + { CAP11XX_REG_STANDBY_CONFIG, 0x39 }, + { CAP11XX_REG_STANDBY_SENSITIVITY, 0x02 }, + { CAP11XX_REG_STANDBY_THRESH, 0x40 }, + { CAP11XX_REG_CONFIG2, 0x40 }, + { CAP11XX_REG_SENSOR_CALIB_LSB1, 0x00 }, + { CAP11XX_REG_SENSOR_CALIB_LSB2, 0x00 }, +}; + +static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case CAP11XX_REG_MAIN_CONTROL: + case CAP11XX_REG_SENSOR_INPUT: + case CAP11XX_REG_SENOR_DELTA(0): + case CAP11XX_REG_SENOR_DELTA(1): + case CAP11XX_REG_SENOR_DELTA(2): + case CAP11XX_REG_SENOR_DELTA(3): + case CAP11XX_REG_SENOR_DELTA(4): + case CAP11XX_REG_SENOR_DELTA(5): + case CAP11XX_REG_PRODUCT_ID: + case CAP11XX_REG_MANUFACTURER_ID: + case CAP11XX_REG_REVISION: + return true; + } + + return false; +} + +static const struct regmap_config cap11xx_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = CAP11XX_REG_REVISION, + .reg_defaults = cap11xx_reg_defaults, + + .num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults), + .cache_type = REGCACHE_RBTREE, + .volatile_reg = cap11xx_volatile_reg, +}; + +static irqreturn_t cap11xx_thread_func(int irq_num, void *data) +{ + struct cap11xx_priv *priv = data; + unsigned int status; + int ret, i; + + /* + * Deassert interrupt. This needs to be done before reading the status + * registers, which will not carry valid values otherwise. + */ + ret = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, 1, 0); + if (ret < 0) + goto out; + + ret = regmap_read(priv->regmap, CAP11XX_REG_SENSOR_INPUT, &status); + if (ret < 0) + goto out; + + for (i = 0; i < CAP11XX_NUM_CHN; i++) + input_report_key(priv->idev, priv->keycodes[i], + status & (1 << i)); + + input_sync(priv->idev); + +out: + return IRQ_HANDLED; +} + +static int cap11xx_set_sleep(struct cap11xx_priv *priv, bool sleep) +{ + return regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_DLSEEP, + sleep ? CAP11XX_REG_MAIN_CONTROL_DLSEEP : 0); +} + +static int cap11xx_input_open(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + return cap11xx_set_sleep(priv, false); +} + +static void cap11xx_input_close(struct input_dev *idev) +{ + struct cap11xx_priv *priv = input_get_drvdata(idev); + + cap11xx_set_sleep(priv, true); +} + +static int cap11xx_i2c_probe(struct i2c_client *i2c_client, + const struct i2c_device_id *id) +{ + struct device *dev = &i2c_client->dev; + struct cap11xx_priv *priv; + struct device_node *node; + int i, error, irq, gain = 0; + unsigned int val, rev; + u32 gain32, keycodes[CAP11XX_NUM_CHN]; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config); + if (IS_ERR(priv->regmap)) + return PTR_ERR(priv->regmap); + + error = regmap_read(priv->regmap, CAP11XX_REG_PRODUCT_ID, &val); + if (error) + return error; + + if (val != CAP11XX_PRODUCT_ID) { + dev_err(dev, "Product ID: Got 0x%02x, expected 0x%02x\n", + val, CAP11XX_PRODUCT_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_MANUFACTURER_ID, &val); + if (error) + return error; + + if (val != CAP11XX_MANUFACTURER_ID) { + dev_err(dev, "Manufacturer ID: Got 0x%02x, expected 0x%02x\n", + val, CAP11XX_MANUFACTURER_ID); + return -ENODEV; + } + + error = regmap_read(priv->regmap, CAP11XX_REG_REVISION, &rev); + if (error < 0) + return error; + + dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev); + i2c_set_clientdata(i2c_client, priv); + node = dev->of_node; + + if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) { + if (is_power_of_2(gain32) && gain32 <= 8) + gain = ilog2(gain32); + else + dev_err(dev, "Invalid sensor-gain value %d\n", gain32); + } + + BUILD_BUG_ON(ARRAY_SIZE(keycodes) != ARRAY_SIZE(priv->keycodes)); + + /* Provide some useful defaults */ + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + keycodes[i] = KEY_A + i; + + of_property_read_u32_array(node, "linux,keycodes", + keycodes, ARRAY_SIZE(keycodes)); + + for (i = 0; i < ARRAY_SIZE(keycodes); i++) + priv->keycodes[i] = keycodes[i]; + + error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL, + CAP11XX_REG_MAIN_CONTROL_GAIN_MASK, + gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT); + if (error) + return error; + + /* Disable autorepeat. The Linux input system has its own handling. */ + error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0); + if (error) + return error; + + priv->idev = devm_input_allocate_device(dev); + if (!priv->idev) + return -ENOMEM; + + priv->idev->name = "CAP11XX capacitive touch sensor"; + priv->idev->id.bustype = BUS_I2C; + priv->idev->evbit[0] = BIT_MASK(EV_KEY); + + if (of_property_read_bool(node, "autorepeat")) + __set_bit(EV_REP, priv->idev->evbit); + + for (i = 0; i < CAP11XX_NUM_CHN; i++) + __set_bit(priv->keycodes[i], priv->idev->keybit); + + __clear_bit(KEY_RESERVED, priv->idev->keybit); + + priv->idev->keycode = priv->keycodes; + priv->idev->keycodesize = sizeof(priv->keycodes[0]); + priv->idev->keycodemax = ARRAY_SIZE(priv->keycodes); + + priv->idev->id.vendor = CAP11XX_MANUFACTURER_ID; + priv->idev->id.product = CAP11XX_PRODUCT_ID; + priv->idev->id.version = rev; + + priv->idev->open = cap11xx_input_open; + priv->idev->close = cap11xx_input_close; + + input_set_drvdata(priv->idev, priv); + + /* + * Put the device in deep sleep mode for now. + * ->open() will bring it back once the it is actually needed. + */ + cap11xx_set_sleep(priv, true); + + error = input_register_device(priv->idev); + if (error) + return error; + + irq = irq_of_parse_and_map(node, 0); + if (!irq) { + dev_err(dev, "Unable to parse or map IRQ\n"); + return -ENXIO; + } + + error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func, + IRQF_ONESHOT, dev_name(dev), priv); + if (error) + return error; + + return 0; +} + +static const struct of_device_id cap11xx_dt_ids[] = { + { .compatible = "microchip,cap1106", }, + {} +}; +MODULE_DEVICE_TABLE(of, cap11xx_dt_ids); + +static const struct i2c_device_id cap11xx_i2c_ids[] = { + { "cap1106", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids); + +static struct i2c_driver cap11xx_i2c_driver = { + .driver = { + .name = "cap11xx", + .owner = THIS_MODULE, + .of_match_table = cap11xx_dt_ids, + }, + .id_table = cap11xx_i2c_ids, + .probe = cap11xx_i2c_probe, +}; + +module_i2c_driver(cap11xx_i2c_driver); + +MODULE_ALIAS("platform:cap11xx"); +MODULE_DESCRIPTION("Microchip CAP11XX driver"); +MODULE_AUTHOR("Daniel Mack "); +MODULE_LICENSE("GPL v2");