diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 9a2432a88074..897eec887e5a 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -171,6 +171,7 @@ properties: - qcom,kryo385 - qcom,kryo468 - qcom,kryo485 + - qcom,kryo560 - qcom,kryo685 - qcom,scorpion diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 70516508be56..8398c0a2150f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -33,12 +33,18 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8996-pmi8996-sony-xperia-tone-keyaki.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-gemini.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8996-xiaomi-scorpio.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-fxtec-pro1.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-lenovo-miix-630.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-mtp.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-cheeseburger.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8998-oneplus-dumpling.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-lilac.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-maple.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8998-sony-xperia-yoshino-poplar.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb @@ -48,6 +54,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r3-lte.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r2.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-homestar-r3.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r0.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-lazor-r1-kb.dtb @@ -84,6 +92,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index f8d8f3e3664e..351c68d29afb 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -305,6 +305,12 @@ status = "okay"; }; +&mpss { + status = "okay"; + + firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn"; +}; + &pm8916_resin { status = "okay"; linux,code = ; @@ -312,6 +318,8 @@ &pronto { status = "okay"; + + firmware-name = "qcom/msm8916/wcnss.mbn"; }; &sdhc_1 { @@ -394,6 +402,10 @@ qcom,mbhc-vthreshold-high = <75 150 237 450 500>; }; +&wcnss_ctrl { + firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin"; +}; + /* Enable CoreSight */ &cti0 { status = "okay"; }; &cti1 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi index 51e17094d7b1..eca428ab2517 100644 --- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi @@ -148,9 +148,6 @@ &blsp1_uart2 { label = "BT-UART"; status = "okay"; - pinctrl-names = "default", "sleep"; - pinctrl-0 = <&blsp1_uart2_default>; - pinctrl-1 = <&blsp1_uart2_sleep>; bluetooth { compatible = "qcom,qca6174-bt"; @@ -437,32 +434,6 @@ }; }; - blsp1_uart2_default: blsp1_uart2_default { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "blsp_uart2"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <16>; - bias-disable; - }; - }; - - blsp1_uart2_sleep: blsp1_uart2_sleep { - mux { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - function = "gpio"; - }; - - config { - pins = "gpio41", "gpio42", "gpio43", "gpio44"; - drive-strength = <2>; - bias-disable; - }; - }; - hdmi_hpd_active: hdmi_hpd_active { mux { pins = "gpio34"; diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi index d2fe58e0eb7a..c79ba072e88f 100644 --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi @@ -200,7 +200,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; qcom,config-pipe-trust-reg = <0>; }; @@ -671,6 +671,89 @@ }; }; + ssphy_0: ssphy@78000 { + compatible = "qcom,ipq6018-qmp-usb3-phy"; + reg = <0x0 0x78000 0x0 0x1C4>; + #address-cells = <2>; + #size-cells = <2>; + #clock-cells = <1>; + ranges; + + clocks = <&gcc GCC_USB0_AUX_CLK>, + <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; + clock-names = "aux", "cfg_ahb", "ref"; + + resets = <&gcc GCC_USB0_PHY_BCR>, + <&gcc GCC_USB3PHY_0_PHY_BCR>; + reset-names = "phy","common"; + status = "disabled"; + + usb0_ssphy: lane@78200 { + reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ + <0x0 0x00078400 0x0 0x200>, /* Rx */ + <0x0 0x00078800 0x0 0x1F8>, /* PCS */ + <0x0 0x00078600 0x0 0x044>; /* PCS misc */ + #phy-cells = <0>; + clocks = <&gcc GCC_USB0_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "gcc_usb0_pipe_clk_src"; + }; + }; + + qusb_phy_0: qusb@79000 { + compatible = "qcom,ipq6018-qusb2-phy"; + reg = <0x0 0x079000 0x0 0x180>; + #phy-cells = <0>; + + clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, + <&xo>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2_0_PHY_BCR>; + status = "disabled"; + }; + + usb3: usb3@8A00000 { + compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; + reg = <0x0 0x8AF8800 0x0 0x400>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_SLEEP_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + clock-names = "sys_noc_axi", + "master", + "sleep", + "mock_utmi"; + + assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, + <&gcc GCC_USB0_MASTER_CLK>, + <&gcc GCC_USB0_MOCK_UTMI_CLK>; + assigned-clock-rates = <133330000>, + <133330000>, + <20000000>; + + resets = <&gcc GCC_USB0_BCR>; + status = "disabled"; + + dwc_0: usb@8A00000 { + compatible = "snps,dwc3"; + reg = <0x0 0x8A00000 0x0 0xcd00>; + interrupts = ; + phys = <&qusb_phy_0>, <&usb0_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + tx-fifo-resize; + snps,is-utmi-l1-suspend; + snps,hird-threshold = /bits/ 8 <0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_u3_susphy_quirk; + snps,ref-clock-period-ns = <0x32>; + dr_mode = "host"; + }; + }; }; wcss: wcss-smp2p { diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi index db333001df4d..aebd0949ac81 100644 --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -212,7 +212,7 @@ status = "disabled"; }; - cryptobam: dma@704000 { + cryptobam: dma-controller@704000 { compatible = "qcom,bam-v1.7.0"; reg = <0x00704000 0x20000>; interrupts = ; @@ -220,7 +220,7 @@ clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <1>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; status = "disabled"; }; @@ -293,6 +293,25 @@ #reset-cells = <0x1>; }; + spmi_bus: spmi@200f000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0x0200f000 0x001000>, + <0x02400000 0x800000>, + <0x02c00000 0x800000>, + <0x03800000 0x200000>, + <0x0200a000 0x000700>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupts = ; + interrupt-names = "periph_irq"; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + cell-index = <0>; + }; + sdhc_1: sdhci@7824900 { compatible = "qcom,sdhci-msm-v4"; reg = <0x7824900 0x500>, <0x7824000 0x800>; diff --git a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts index 1e893c0b6fbc..285102f0e04f 100644 --- a/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts +++ b/arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dts @@ -30,14 +30,6 @@ }; }; - // FIXME: Use extcon device provided by charger driver when available - usb_vbus: usb-vbus { - compatible = "linux,extcon-usb-gpio"; - vbus-gpio = <&msmgpio 62 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&usb_vbus_default>; - }; - gpio-keys { compatible = "gpio-keys"; @@ -121,9 +113,21 @@ status = "okay"; accelerometer@10 { - compatible = "bosch,bmc150_accel"; + compatible = "bosch,bmc156_accel"; reg = <0x10>; + /* + * For some reason the interrupt line is usually not connected + * to the BMC156. However, there are two pads next to the chip + * that can be shorted to make it work if needed. + * + * interrupt-parent = <&msmgpio>; + * interrupts = <116 IRQ_TYPE_EDGE_RISING>; + */ + + pinctrl-names = "default"; + pinctrl-0 = <&accel_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; @@ -133,9 +137,15 @@ }; magnetometer@12 { - compatible = "bosch,bmc150_magn"; + compatible = "bosch,bmc156_magn"; reg = <0x12>; + interrupt-parent = <&msmgpio>; + interrupts = <113 IRQ_TYPE_EDGE_RISING>; + + pinctrl-names = "default"; + pinctrl-0 = <&magn_int_default>; + vdd-supply = <&pm8916_l17>; vddio-supply = <&pm8916_l6>; }; @@ -145,7 +155,8 @@ reg = <0x68>; interrupt-parent = <&msmgpio>; - interrupts = <23 IRQ_TYPE_EDGE_RISING>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>, + <22 IRQ_TYPE_EDGE_RISING>; pinctrl-names = "default"; pinctrl-0 = <&gyro_int_default>; @@ -196,6 +207,10 @@ linux,code = ; }; +&pm8916_usbin { + status = "okay"; +}; + &pm8916_vib { status = "okay"; }; @@ -225,11 +240,11 @@ &usb { status = "okay"; dr_mode = "peripheral"; - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &usb_hs_phy { - extcon = <&usb_vbus>; + extcon = <&pm8916_usbin>; }; &smd_rpm_regulators { @@ -336,6 +351,14 @@ }; &msmgpio { + accel_int_default: accel-int-default { + pins = "gpio116"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + camera_flash_default: camera-flash-default { pins = "gpio31", "gpio32"; function = "gpio"; @@ -361,7 +384,15 @@ }; gyro_int_default: gyro-int-default { - pins = "gpio23"; + pins = "gpio22", "gpio23"; + function = "gpio"; + + drive-strength = <2>; + bias-disable; + }; + + magn_int_default: magn-int-default { + pins = "gpio113"; function = "gpio"; drive-strength = <2>; @@ -375,11 +406,4 @@ drive-strength = <2>; bias-disable; }; - - usb_vbus_default: usb-vbus-default { - pins = "gpio62"; - function = "gpio"; - - bias-pull-up; - }; }; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 3f85e34a8ce6..6b06b387b021 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -414,7 +414,7 @@ }; }; - soc: soc { + soc: soc@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0 0 0 0xffffffff>; @@ -1384,11 +1384,17 @@ lpass: audio-controller@7708000 { status = "disabled"; compatible = "qcom,lpass-cpu-apq8016"; + + /* + * Note: Unlike the name would suggest, the SEC_I2S_CLK + * is actually only used by Tertiary MI2S while + * Primary/Secondary MI2S both use the PRI_I2S_CLK. + */ clocks = <&gcc GCC_ULTAUDIO_AHBFABRIC_IXFABRIC_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_MPORT_CLK>, <&gcc GCC_ULTAUDIO_PCNOC_SWAY_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, - <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, + <&gcc GCC_ULTAUDIO_LPAIF_PRI_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_SEC_I2S_CLK>, <&gcc GCC_ULTAUDIO_LPAIF_AUX_I2S_CLK>; @@ -1420,7 +1426,7 @@ }; sdhc_1: sdhci@7824000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07824900 0x11c>, <0x07824000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1438,7 +1444,7 @@ }; sdhc_2: sdhci@7864000 { - compatible = "qcom,sdhci-msm-v4"; + compatible = "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"; reg = <0x07864900 0x11c>, <0x07864000 0x800>; reg-names = "hc_mem", "core_mem"; @@ -1765,7 +1771,7 @@ label = "pronto"; - wcnss { + wcnss_ctrl: wcnss { compatible = "qcom,wcnss"; qcom,smd-channels = "WCNSS_CTRL"; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi new file mode 100644 index 000000000000..d239b01b8505 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi @@ -0,0 +1,673 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +/dts-v1/; + +#include "msm8996.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include +#include +#include +#include + +/ { + clocks { + compatible = "simple-bus"; + + divclk1_cdc: divclk1 { + compatible = "gpio-gate-clock"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk1_default>; + }; + + divclk4: divclk4 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk4"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk4_pin_a>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + vol_up { + label = "Volume Up"; + gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + + dome { + label = "Home"; + gpios = <&tlmm 34 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; + + reserved-memory { + memory@88800000 { + reg = <0x0 0x88800000 0x0 0x1400000>; + no-map; + }; + + /* This platform has all PIL regions offset by 0x1400000 */ + /delete-node/ mpss@88800000; + mpss_region: mpss@89c00000 { + reg = <0x0 0x89c00000 0x0 0x6200000>; + no-map; + }; + + /delete-node/ adsp@8ea00000; + adsp_region: adsp@8ea00000 { + reg = <0x0 0x8fe00000 0x0 0x1b00000>; + no-map; + }; + + /delete-node/ slpi@90b00000; + slpi_region: slpi@91900000 { + reg = <0x0 0x91900000 0x0 0xa00000>; + no-map; + }; + + /delete-node/ gpu@8f200000; + zap_shader_region: gpu@92300000 { + compatible = "shared-dma-pool"; + reg = <0x0 0x92300000 0x0 0x2000>; + no-map; + }; + + /delete-node/ venus@91000000; + venus_region: venus@90400000 { + reg = <0x0 0x92400000 0x0 0x500000>; + no-map; + }; + + ramoops@92900000 { + compatible = "ramoops"; + reg = <0x0 0x92900000 0x0 0x100000>; + no-map; + + record-size = <0x8000>; + console-size = <0x80000>; + ftrace-size = <0x20000>; + pmsg-size = <0x40000>; + }; + + /delete-node/ rmtfs@86700000; + rmtfs@f6c00000 { + compatible = "qcom,rmtfs-mem"; + reg = <0 0xf6c00000 0 0x200000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; + + /delete-node/ mba@91500000; + mba_region: mba@f6f00000 { + reg = <0x0 0xf6f00000 0x0 0x100000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v2_tp: vdd-3v2-tp { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v2_tp"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr>; + + gpio = <&tlmm 73 0>; + enable-active-high; + }; + + vdd_3v3: rome-vreg { + compatible = "regulator-fixed"; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <4000>; + vin-supply = <&vph_pwr_bbyp>; + + gpio = <&pm8994_gpios 9 0>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&rome_enable_default>; + + /* Required by QCA6174a - vddpe-3v3 */ + regulator-always-on; + }; + + /* WL_EN pin defined as a fixed regulator */ + wlan_en: wlan-en-1-8v { + compatible = "regulator-fixed"; + regulator-name = "wlan-en-regulator"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&pm8994_gpios 8 0>; + /* WLAN card specific delay */ + startup-delay-us = <70000>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_en_default>; + }; +}; + +&adsp_pil { + status = "okay"; +}; + +&blsp2_i2c2 { + status = "okay"; + label = "NFC_I2C"; + + nfc: pn548@28 { + compatible = "nxp,nxp-nci-i2c"; + + reg = <0x28>; + clock-frequency = <400000>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 21 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&nfc_default>; + }; +}; + +&blsp2_i2c3 { + status = "okay"; + label = "TYPEC_I2C"; + + typec: tusb320@47 { + compatible = "ti,tusb320"; + reg = <0x47>; + interrupt-parent = <&tlmm>; + interrupts = <63 IRQ_TYPE_EDGE_RISING>; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + label = "MSM_TS_I2C"; +}; + +&blsp1_uart2 { + status = "okay"; + label = "QCA_UART"; + + bluetooth: qca6174a { + compatible = "qcom,qca6174-bt"; + + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>; + clocks = <&divclk4>; + }; +}; + +&dsi0 { + status = "okay"; + + vdd-supply = <&vreg_l2a_1p25>; + vddio-supply = <&vreg_l14a_1p8>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mdss_dsi_default &mdss_te_default>; + pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>; +}; + +&dsi0_out { + status = "okay"; + + data-lanes = <0 1 2 3>; +}; + +&dsi0_phy { + status = "okay"; + + vcca-supply = <&vreg_l28a_0p925>; +}; + +&gpu { + status = "okay"; +}; + +&mdss { + status = "okay"; +}; + +&mmcc { + vdd-gfx-supply = <&vdd_gfx>; +}; + +&pcie0 { + status = "okay"; + + /* Supplied by vdd_3v3, but choose wlan_en to drive enable pin high */ + vddpe-3v3-supply = <&wlan_en>; + vdda-supply = <&vreg_l28a_0p925>; + + perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>; +}; + +&pcie_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; +}; + +&pm8994_resin { + status = "okay"; + + linux,code = ; +}; + +&usb3 { + status = "okay"; + extcon = <&typec>; + + qcom,select-utmi-as-pipe-clk; + + dwc3@6a00000 { + extcon = <&typec>; + + /* usb3-phy is not used on this device */ + phys = <&hsusb_phy1>; + phy-names = "usb2-phy"; + + maximum-speed = "high-speed"; + snps,is-utmi-l1-suspend; + snps,usb2-gadget-lpm-disable; + snps,hird-threshold = /bits/ 8 <0>; + }; +}; + +&hsusb_phy1 { + status = "okay"; + extcon = <&typec>; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&ufshc { + status = "okay"; + + vcc-supply = <&vreg_l20a_2p95>; + vccq-supply = <&vreg_l25a_1p2>; + vccq2-supply = <&vreg_s4a_1p8>; + + vcc-max-microamp = <600000>; + vccq-max-microamp = <450000>; + vccq2-max-microamp = <450000>; +}; + +&ufsphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l28a_0p925>; + vdda-pll-supply = <&vreg_l12a_1p8>; + + vdda-phy-max-microamp = <18380>; + vdda-pll-max-microamp = <9440>; + + vddp-ref-clk-supply = <&vreg_l25a_1p2>; + vddp-ref-clk-max-microamp = <100>; + vddp-ref-clk-always-on; +}; + +&venus { + status = "okay"; +}; + +&wcd9335 { + clock-names = "mclk", "slimbus"; + clocks = <&divclk1_cdc>, + <&rpmcc RPM_SMD_BB_CLK1>; + + vdd-buck-supply = <&vreg_s4a_1p8>; + vdd-buck-sido-supply = <&vreg_s4a_1p8>; + vdd-rx-supply = <&vreg_s4a_1p8>; + vdd-tx-supply = <&vreg_s4a_1p8>; + vdd-vbat-supply = <&vph_pwr>; + vdd-micbias-supply = <&vph_pwr_bbyp>; + vdd-io-supply = <&vreg_s4a_1p8>; +}; + +&rpm_requests { + pm8994-regulators { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_l1-supply = <&vreg_s1b_1p025>; + vdd_l2_l26_l28-supply = <&vreg_s3a_1p3>; + vdd_l3_l11-supply = <&vreg_s3a_1p3>; + vdd_l4_l27_l31-supply = <&vreg_s3a_1p3>; + vdd_l5_l7-supply = <&vreg_s5a_2p15>; + vdd_l6_l12_l32-supply = <&vreg_s5a_2p15>; + vdd_l8_l16_l30-supply = <&vph_pwr>; + vdd_l9_l10_l18_l22-supply = <&vph_pwr_bbyp>; + vdd_l13_l19_l23_l24-supply = <&vph_pwr_bbyp>; + vdd_l14_l15-supply = <&vreg_s5a_2p15>; + vdd_l17_l29-supply = <&vph_pwr_bbyp>; + vdd_l20_l21-supply = <&vph_pwr_bbyp>; + vdd_l25-supply = <&vreg_s3a_1p3>; + vdd_lvs1_2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p3: s3 { + regulator-name = "vreg_s3a_1p3"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + + /* Required by QCA6174a - vdd-core */ + regulator-always-on; + }; + vreg_s4a_1p8: s4 { + regulator-name = "vreg_s4a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + + /* Required by QCA6174a - vddio */ + regulator-always-on; + }; + vreg_s5a_2p15: s5 { + regulator-name = "vreg_s5a_2p15"; + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + vreg_s7a_0p8: s7 { + regulator-name = "vreg_s7a_0p8"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l1a_1p0: l1 { + regulator-name = "vreg_l1a_1p0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l2a_1p25: l2 { + regulator-name = "vreg_l2a_1p25"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + }; + vreg_l4a_1p225: l4 { + regulator-name = "vreg_l4a_1p225"; + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + vreg_l6a_1p8: l6 { + regulator-name = "vreg_l6a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p8: l8 { + regulator-name = "vreg_l8a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l9a_1p8: l9 { + regulator-name = "vreg_l9a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l10a_1p8: l10 { + regulator-name = "vreg_l10a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l12a_1p8: l12 { + regulator-name = "vreg_l12a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + }; + vreg_l13a_2p95: l13 { + regulator-name = "vreg_l13a_2p95"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + vreg_l14a_1p8: l14 { + regulator-name = "vreg_l14a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l15a_1p8: l15 { + regulator-name = "vreg_l15a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-name = "vreg_l16a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + vreg_l19a_3p3: l19 { + regulator-name = "vreg_l19a_3p3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_l20a_2p95: l20 { + regulator-name = "vreg_l20a_2p95"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-name = "vreg_l21a_2p95"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vreg_l23a_2p8: l23 { + regulator-name = "vreg_l23a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l24a_3p075: l24 { + regulator-name = "vreg_l24a_3p075"; + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + vreg_l25a_1p2: l25 { + regulator-name = "vreg_l25a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l27a_1p2: l27 { + regulator-name = "vreg_l27a_1p2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l28a_0p925: l28 { + regulator-name = "vreg_l28a_0p925"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + vreg_l30a_1p8: l30 { + regulator-name = "vreg_l30a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* Required by QCA6174a - vddio-xtal */ + regulator-always-on; + }; + vreg_l32a_1p8: l32 { + regulator-name = "vreg_l32a_1p8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs1a_1p8: lvs1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_lvs2a_1p8: lvs2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + + pmi8994-regulators { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + vreg_s1b_1p025: s1 { + regulator-name = "vreg_s1b_1p025"; + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + vph_pwr_bbyp: boost-bypass { + regulator-name = "vph_pwr_bbyp"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&pm8994_spmi_regulators { + qcom,saw-reg = <&saw3>; + s8 { + qcom,saw-slave; + }; + s9 { + qcom,saw-slave; + }; + s10 { + qcom,saw-slave; + }; + vreg_apc_0p8: s11 { + qcom,saw-leader; + regulator-name = "vreg_apc_0p8"; + regulator-min-microvolt = <470000>; + regulator-max-microvolt = <1140000>; + regulator-max-step-microvolt = <150000>; + regulator-always-on; + }; +}; + +&pmi8994_spmi_regulators { + vdd_gfx: s2 { + regulator-name = "vdd_gfx"; + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1015000>; + regulator-enable-ramp-delay = <500>; + }; +}; + +&pm8994_gpios { + wlan_en_default: wlan-en-default { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + output-low; + qcom,drive-strength = ; + power-source = ; + bias-disable; + }; + + rome_enable_default: rome-enable-default { + pins = "gpio9"; + function = PMIC_GPIO_FUNC_NORMAL; + output-high; + qcom,drive-strength = ; + power-source = ; + }; + + divclk1_default: divclk1_default { + pins = "gpio15"; + function = PMIC_GPIO_FUNC_FUNC1; + bias-disable; + power-source = ; + qcom,drive-strength = ; + }; + + divclk4_pin_a: divclk4 { + pins = "gpio18"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&tlmm { + mdss_dsi_default: mdss_dsi_default { + pins = "gpio8"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + mdss_dsi_sleep: mdss_dsi_sleep { + pins = "gpio8"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_default: mdss_te_default { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + mdss_te_sleep: mdss_te_sleep { + pins = "gpio10"; + function = "mdp_vsync"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_default: nfc_default { + pins = "gpio12", "gpio21"; + function = "gpio"; + drive-strength = <16>; + bias-pull-up; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts new file mode 100644 index 000000000000..77d508e5164a --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Raffaele Tranquillini + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include +#include +#include + +/ { + model = "Xiaomi Mi 5"; + compatible = "xiaomi,gemini", "qcom,msm8996"; + qcom,msm-id = <246 0x30001>; + qcom,pmic-id = <0x20009 0x2000a 0x00 0x00>; + qcom,board-id = <31 0>; + + clocks { + divclk2_haptics: divclk2 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "divclk2"; + + pinctrl-names = "default"; + pinctrl-0 = <&divclk2_pin_a>; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/gemini/adsp.mbn"; +}; + +&blsp2_i2c3 { + haptics: drv2604@5a { + compatible = "ti,drv2604"; + reg = <0x5a>; + enable-gpio = <&tlmm 93 0x00>; + mode = ; + library-sel = ; + pinctrl-names = "default","sleep"; + pinctrl-0 = <&vibrator_default>; + pinctrl-1 = <&vibrator_sleep>; + }; + + lp5562@30 { + compatible = "ti,lp5562"; + reg = <0x30>; + #address-cells = <1>; + #size-cells = <0>; + enable-gpio = <&pm8994_gpios 7 1>; + clock-mode = /bits/8 <2>; + label = "button-backlight"; + + led@0 { + reg = <0>; + chan-name = "button-backlight"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + + led@1 { + reg = <0>; + chan-name = "button-backlight1"; + led-cur = /bits/ 8 <0x32>; + max-cur = /bits/ 8 <0xC8>; + }; + }; +}; + +&blsp2_i2c6 { + synaptics@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; + +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/gemini/a530_zap.mbn"; + }; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "gemini"; + audio-routing = "RX_BIAS", "MCLK", + "MM_DL1", "MultiMedia1 Playback", + "MM_DL2", "MultiMedia2 Playback", + "MultiMedia3 Capture", "MM_UL3"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/gemini/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "FP_ID", /* GPIO_10 */ + "NC", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ + + divclk2_pin_a: divclk2 { + pins = "gpio16"; + function = PMIC_GPIO_FUNC_FUNC2; + bias-disable; + power-source = ; + }; +}; + +&pm8994_mpps { + gpio-line-names = + "NC", /* MPP_1 */ + "CCI_TIMER1", /* MPP_2 */ + "PMIC_SLB", /* MPP_3 */ + "EXT_FET_WLED_PWR_EN_N",/* MPP_4 */ + "NC", /* MPP_5 */ + "NC", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "ERR_INT_N", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "LCD0_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "LCD_TE", /* GPIO_10 */ + "LCD_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "NC", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "NC", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "FM_INT_N", /* GPIO_38 */ + "FM_RESET_N", /* GPIO_39 */ + "NC", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "HIFI_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "FM_I2S_CLK", /* GPIO_75 */ + "FM_I2S_SYNC", /* GPIO_76 */ + "FM_I2S_DATA", /* GPIO_77 */ + "FM_STATUS", /* GPIO_78 */ + "NC", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "NC", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "TS_RESOUT_N", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "HAPTICS_EN", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "NC", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACCEL_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "NC", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "NC", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "NC", /* GPIO_135 */ + "NC", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio89", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + vibrator_default: vibrator_default { + pins = "gpio93"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + vibrator_sleep: vibrator_sleep { + pins = "gpio93"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts new file mode 100644 index 000000000000..ea2ca271fe7d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-scorpio.dts @@ -0,0 +1,431 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2020, Yassine Oudjana + */ + +/dts-v1/; + +#include "msm8996-xiaomi-common.dtsi" +#include "pmi8996.dtsi" +#include +#include + +/ { + model = "Xiaomi Mi Note 2"; + compatible = "xiaomi,scorpio", "qcom,msm8996"; + qcom,msm-id = <305 0x10000>; + qcom,board-id = <34 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer0: framebuffer@83401000 { + compatible = "simple-framebuffer"; + reg = <0x00 0x83401000 0x00 (1080 * 1920 * 3)>; + width = <1080>; + height = <1920>; + stride = <(1080 * 3)>; + format = "r8g8b8"; + + /* DSI0 and MDP SMMU clocks */ + clocks = <&mmcc MDSS_MDP_CLK>, + <&mmcc MMSS_MMAGIC_AHB_CLK>, + <&mmcc MDSS_AHB_CLK>, + <&mmcc MDSS_AXI_CLK>, + <&mmcc MMSS_MISC_AHB_CLK>, + <&mmcc MDSS_BYTE0_CLK>, + <&mmcc MDSS_PCLK0_CLK>, + <&mmcc MDSS_ESC0_CLK>, + <&mmcc SMMU_MDP_AHB_CLK>, + <&mmcc SMMU_MDP_AXI_CLK>; + + /* MDSS power domain */ + power-domains = <&mmcc MDSS_GDSC>; + }; + }; + + reserved-memory { + cont_splash_mem: memory@83401000 { + reg = <0x0 0x83401000 0x0 (1080 * 1920 * 3)>; + no-map; + }; + }; +}; + +&adsp_pil { + firmware-name = "qcom/msm8996/scorpio/adsp.mbn"; +}; + +&blsp2_i2c6 { + touchscreen: atmel-mxt-ts@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + vdda-supply = <&vreg_l6a_1p8>; + vdd-supply = <&vdd_3v2_tp>; + reset-gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&touchscreen_default>; + pinctrl-1 = <&touchscreen_sleep>; + }; +}; + +&gpu { + zap-shader { + firmware-name = "qcom/msm8996/scorpio/a530_zap.mbn"; + }; +}; + +&mdp_smmu { + /* + * Probing this SMMU causes a crash due to writing to some secure + * registers. Disable it for now. + */ + status = "disabled"; +}; + +&mdss { + /* + * MDSS depends on the MDP SMMU, and probing it alters the bootloader + * configured framebuffer used by simplefb. Disable it for now. + */ + status = "disabled"; +}; + +&q6asmdai { + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; +}; + +&sound { + compatible = "qcom,apq8096-sndcard"; + model = "scorpio"; + audio-routing = "RX_BIAS", "MCLK"; + + mm1-dai-link { + link-name = "MultiMedia1"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>; + }; + }; + + mm2-dai-link { + link-name = "MultiMedia2"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>; + }; + }; + + mm3-dai-link { + link-name = "MultiMedia3"; + cpu { + sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>; + }; + }; + + slim-dai-link { + link-name = "SLIM Playback"; + cpu { + sound-dai = <&q6afedai SLIMBUS_6_RX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 6>; + }; + }; + + slimcap-dai-link { + link-name = "SLIM Capture"; + cpu { + sound-dai = <&q6afedai SLIMBUS_0_TX>; + }; + + platform { + sound-dai = <&q6routing>; + }; + + codec { + sound-dai = <&wcd9335 1>; + }; + }; +}; + +&venus { + firmware-name = "qcom/msm8996/scorpio/venus.mbn"; +}; + +&rpm_requests { + pm8994-regulators { + vreg_l3a_0p875: l3 { + regulator-name = "vreg_l3a_0p875"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + }; + vreg_l11a_1p1: l11 { + regulator-name = "vreg_l11a_1p1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + vreg_l17a_2p8: l17 { + regulator-name = "vreg_l17a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l18a_2p8: l18 { + regulator-name = "vreg_l18a_2p8"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + vreg_l22a_3p0: l22 { + regulator-name = "vreg_l22a_3p0"; + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <3500000>; + }; + vreg_l29a_2p7: l29 { + regulator-name = "vreg_l29a_2p7"; + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + }; +}; + +&vdd_gfx { + regulator-max-microvolt = <1065000>; +}; + +&pm8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "VOL_UP_N", /* GPIO_2 */ + "SPKR_ID", /* GPIO_3 */ + "PWM_HAPTICS", /* GPIO_4 */ + "INFARED_DRV", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "KEYPAD_LED_EN_A", /* GPIO_7 */ + "WL_EN", /* GPIO_8 */ + "3P3_ENABLE", /* GPIO_9 */ + "KEYPAD_LED_EN_B", /* GPIO_10 */ + "FP_ID", /* GPIO_11 */ + "NC", /* GPIO_12 */ + "NC", /* GPIO_13 */ + "NC", /* GPIO_14 */ + "DIVCLK1_CDC", /* GPIO_15 */ + "DIVCLK2_HAPTICS", /* GPIO_16 */ + "NC", /* GPIO_17 */ + "32KHz_CLK_IN", /* GPIO_18 */ + "BT_EN", /* GPIO_19 */ + "PMIC_SLB", /* GPIO_20 */ + "UIM_BATT_ALARM", /* GPIO_21 */ + "NC"; /* GPIO_22 */ +}; + +&pm8994_mpps { + gpio-line-names = + "VREF_SDC_UIM_APC", /* MPP_1 */ + "NC", /* MPP_2 */ + "VREF_DACX", /* MPP_3 */ + "NC", /* MPP_4 */ + "NC", /* MPP_5 */ + "STAT_SMB1351", /* MPP_6 */ + "NC", /* MPP_7 */ + "NC"; /* MPP_8 */ +}; + +&pmi8994_gpios { + gpio-line-names = + "NC", /* GPIO_1 */ + "SPKR_PA_RST", /* GPIO_2 */ + "NC", /* GPIO_3 */ + "NC", /* GPIO_4 */ + "NC", /* GPIO_5 */ + "NC", /* GPIO_6 */ + "NC", /* GPIO_7 */ + "NC", /* GPIO_8 */ + "NC", /* GPIO_9 */ + "NC"; /* GPIO_10 */ +}; + +&tlmm { + gpio-line-names = + "ESE_SPI_MOSI", /* GPIO_0 */ + "ESE_SPI_MISO", /* GPIO_1 */ + "NC", /* GPIO_2 */ + "ESE_SPI_CLK", /* GPIO_3 */ + "MSM_UART_TX", /* GPIO_4 */ + "MSM_UART_RX", /* GPIO_5 */ + "NFC_I2C_SDA", /* GPIO_6 */ + "NFC_I2C_SCL", /* GPIO_7 */ + "OLED_RESET_N", /* GPIO_8 */ + "NFC_IRQ", /* GPIO_9 */ + "OLED_TE", /* GPIO_10 */ + "OLED_ID_DET1", /* GPIO_11 */ + "NFC_DISABLE", /* GPIO_12 */ + "CAM_MCLK0", /* GPIO_13 */ + "OLED_ID_DET2", /* GPIO_14 */ + "CAM_MCLK2", /* GPIO_15 */ + "ESE_PWR_REQ", /* GPIO_16 */ + "CCI_I2C_SDA0", /* GPIO_17 */ + "CCI_I2C_SCL0", /* GPIO_18 */ + "CCI_I2C_SDA1", /* GPIO_19 */ + "CCI_I2C_SCL1", /* GPIO_20 */ + "NFC_DWL_REQ", /* GPIO_21 */ + "CCI_TIMER1", /* GPIO_22 */ + "WEBCAM1_RESET_N", /* GPIO_23 */ + "ESE_IRQ", /* GPIO_24 */ + "NC", /* GPIO_25 */ + "WEBCAM1_STANDBY", /* GPIO_26 */ + "NC", /* GPIO_27 */ + "NC", /* GPIO_28 */ + "OLED_ERR_FG", /* GPIO_29 */ + "CAM1_RST_N", /* GPIO_30 */ + "HIFI_SW_MUTE", /* GPIO_31 */ + "NC", /* GPIO_32 */ + "NC", /* GPIO_33 */ + "FP_DOME_SW", /* GPIO_34 */ + "PCI_E0_RST_N", /* GPIO_35 */ + "PCI_E0_CLKREQ_N", /* GPIO_36 */ + "PCI_E0_WAKE", /* GPIO_37 */ + "OV_PWDN", /* GPIO_38 */ + "NC", /* GPIO_39 */ + "VDDR_1P6_EN", /* GPIO_40 */ + "QCA_UART_TXD", /* GPIO_41 */ + "QCA_UART_RXD", /* GPIO_42 */ + "QCA_UART_CTS", /* GPIO_43 */ + "QCA_UART_RTS", /* GPIO_44 */ + "MAWC_UART_TX", /* GPIO_45 */ + "MAWC_UART_RX", /* GPIO_46 */ + "NC", /* GPIO_47 */ + "NC", /* GPIO_48 */ + "AUDIO_SWITCH_EN", /* GPIO_49 */ + "FP_SPI_RST", /* GPIO_50 */ + "TYPEC_I2C_SDA", /* GPIO_51 */ + "TYPEC_I2C_SCL", /* GPIO_52 */ + "CODEC_INT2_N", /* GPIO_53 */ + "CODEC_INT1_N", /* GPIO_54 */ + "APPS_I2C7_SDA", /* GPIO_55 */ + "APPS_I2C7_SCL", /* GPIO_56 */ + "FORCE_USB_BOOT", /* GPIO_57 */ + "SPKR_I2S_BCK", /* GPIO_58 */ + "SPKR_I2S_WS", /* GPIO_59 */ + "SPKR_I2S_DOUT", /* GPIO_60 */ + "SPKR_I2S_DIN", /* GPIO_61 */ + "ESE_RSTN", /* GPIO_62 */ + "TYPEC_INT", /* GPIO_63 */ + "CODEC_RESET_N", /* GPIO_64 */ + "PCM_CLK", /* GPIO_65 */ + "PCM_SYNC", /* GPIO_66 */ + "PCM_DIN", /* GPIO_67 */ + "PCM_DOUT", /* GPIO_68 */ + "CDC_44K1_CLK", /* GPIO_69 */ + "SLIMBUS_CLK", /* GPIO_70 */ + "SLIMBUS_DATA0", /* GPIO_71 */ + "SLIMBUS_DATA1", /* GPIO_72 */ + "LDO_5V_IN_EN", /* GPIO_73 */ + "NC", /* GPIO_74 */ + "TSP_RST_N", /* GPIO_75 */ + "NC", /* GPIO_76 */ + "TOUCHKEY_INT", /* GPIO_77 */ + "SPKR_I2S_MCLK", /* GPIO_78 */ + "SPKR_PA_INT", /* GPIO_79 */ + "SENSOR_RESET_N", /* GPIO_80 */ + "FP_SPI_MOSI", /* GPIO_81 */ + "FP_SPI_MISO", /* GPIO_82 */ + "FP_SPI_CS_N", /* GPIO_83 */ + "FP_SPI_CLK", /* GPIO_84 */ + "HIFI_SD", /* GPIO_85 */ + "CAM_VDD_1P05_EN", /* GPIO_86 */ + "MSM_TS_I2C_SDA", /* GPIO_87 */ + "MSM_TS_I2C_SCL", /* GPIO_88 */ + "NC", /* GPIO_89 */ + "ESE_SPI_CS_N", /* GPIO_90 */ + "NC", /* GPIO_91 */ + "NC", /* GPIO_92 */ + "NC", /* GPIO_93 */ + "NC", /* GPIO_94 */ + "NC", /* GPIO_95 */ + "NC", /* GPIO_96 */ + "GRFC_0", /* GPIO_97 */ + "GRFC_1", /* GPIO_98 */ + "NC", /* GPIO_99 */ + "GRFC_3", /* GPIO_100 */ + "GRFC_4", /* GPIO_101 */ + "NC", /* GPIO_102 */ + "NC", /* GPIO_103 */ + "GRFC_7", /* GPIO_104 */ + "UIM2_DATA", /* GPIO_105 */ + "UIM2_CLK", /* GPIO_106 */ + "UIM2_RESET", /* GPIO_107 */ + "UIM2_PRESENT", /* GPIO_108 */ + "UIM1_DATA", /* GPIO_109 */ + "UIM1_CLK", /* GPIO_110 */ + "UIM1_RESET", /* GPIO_111 */ + "UIM1_PRESENT", /* GPIO_112 */ + "UIM_BATT_ALARM", /* GPIO_113 */ + "GRFC_8", /* GPIO_114 */ + "GRFC_9", /* GPIO_115 */ + "TX_GTR_THRES", /* GPIO_116 */ + "ACC_INT", /* GPIO_117 */ + "GYRO_INT", /* GPIO_118 */ + "COMPASS_INT", /* GPIO_119 */ + "PROXIMITY_INT_N", /* GPIO_120 */ + "FP_IRQ", /* GPIO_121 */ + "TSP_TA", /* GPIO_122 */ + "HALL_INTR2", /* GPIO_123 */ + "HALL_INTR1", /* GPIO_124 */ + "TS_INT_N", /* GPIO_125 */ + "NC", /* GPIO_126 */ + "GRFC_11", /* GPIO_127 */ + "HIFI_PWR_EN", /* GPIO_128 */ + "EXT_GPS_LNA_EN", /* GPIO_129 */ + "NC", /* GPIO_130 */ + "NC", /* GPIO_131 */ + "NC", /* GPIO_132 */ + "GRFC_14", /* GPIO_133 */ + "GSM_TX2_PHASE_D", /* GPIO_134 */ + "HIFI_SW_SEL", /* GPIO_135 */ + "GRFC_15", /* GPIO_136 */ + "RFFE3_DATA", /* GPIO_137 */ + "RFFE3_CLK", /* GPIO_138 */ + "NC", /* GPIO_139 */ + "NC", /* GPIO_140 */ + "RFFE5_DATA", /* GPIO_141 */ + "RFFE5_CLK", /* GPIO_142 */ + "NC", /* GPIO_143 */ + "COEX_UART_TX", /* GPIO_144 */ + "COEX_UART_RX", /* GPIO_145 */ + "RFFE2_DATA", /* GPIO_146 */ + "RFFE2_CLK", /* GPIO_147 */ + "RFFE1_DATA", /* GPIO_148 */ + "RFFE1_CLK"; /* GPIO_149 */ + + touchscreen_default: touchscreen_default { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; + + touchscreen_sleep: touchscreen_sleep { + pins = "gpio75", "gpio125"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index 52df22ab3f6a..eb3ec5ff46eb 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -1211,6 +1211,20 @@ }; }; + blsp1_uart2_default: blsp1-uart2-default { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "blsp_uart2"; + drive-strength = <16>; + bias-disable; + }; + + blsp1_uart2_sleep: blsp1-uart2-sleep { + pins = "gpio41", "gpio42", "gpio43", "gpio44"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + blsp1_i2c3_default: blsp1-i2c2-default { pins = "gpio47", "gpio48"; function = "blsp_i2c3"; @@ -1239,6 +1253,20 @@ bias-disable; }; + blsp2_i2c3_default: blsp2-i2c3 { + pins = "gpio51", "gpio52"; + function = "blsp_i2c9"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_i2c3_sleep: blsp2-i2c3-sleep { + pins = "gpio51", "gpio52"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcd_intr_default: wcd-intr-default{ pins = "gpio54"; function = "gpio"; @@ -2686,7 +2714,7 @@ status = "disabled"; }; - blsp1_dma: dma@7544000 { + blsp1_dma: dma-controller@7544000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07544000 0x2b000>; interrupts = ; @@ -2704,6 +2732,9 @@ clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; dmas = <&blsp1_dma 2>, <&blsp1_dma 3>; dma-names = "tx", "rx"; status = "disabled"; @@ -2743,7 +2774,7 @@ status = "disabled"; }; - blsp2_dma: dma@7584000 { + blsp2_dma: dma-controller@7584000 { compatible = "qcom,bam-v1.7.0"; reg = <0x07584000 0x2b000>; interrupts = ; @@ -2808,6 +2839,24 @@ status = "disabled"; }; + blsp2_i2c3: i2c@75b7000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0x075b7000 0x1000>; + interrupts = ; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP3_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_i2c3_default>; + pinctrl-1 = <&blsp2_i2c3_sleep>; + dmas = <&blsp2_dma 16>, <&blsp2_dma 17>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + blsp2_i2c5: i2c@75b9000 { compatible = "qcom,i2c-qup-v2.2.1"; reg = <0x75b9000 0x1000>; diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts new file mode 100644 index 000000000000..49705fe655ee --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts @@ -0,0 +1,319 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-mtp.dtsi" + +#include +#include +#include + +/ { + model = "F(x)tec Pro1 (QX1000)"; + compatible = "fxtec,pro1", "qcom,msm8998"; + qcom,board-id = <0x02000b 0x10>; + + /* + * Until we hook up type-c detection, we + * have to stick with this. But it works. + */ + extcon_usb: extcon-usb { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&tlmm 38 GPIO_ACTIVE_HIGH>; + }; + + gpio-hall-sensors { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor1_default>; + + hall-sensor1 { + label = "Keyboard Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_HIGH>; + debounce-interval = <15>; + gpio-key,wakeup; + linux,input-type = ; + linux,code = ; + }; + }; + + gpio-kb-extra-keys { + compatible = "gpio-keys"; + input-name = "extra-kb-keys"; + label = "Keyboard extra keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_kb_pins_extra>; + + home { + label = "Home"; + gpios = <&tlmm 21 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + super-l { + label = "Super Left"; + gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + super-r { + label = "Super Right"; + gpios = <&tlmm 33 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + shift { + label = "Shift"; + gpios = <&tlmm 114 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + ctrl { + label = "Ctrl"; + gpios = <&tlmm 128 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + + alt { + label = "Alt"; + gpios = <&tlmm 129 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <15>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "side-buttons"; + label = "Side buttons"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&vol_up_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-up { + label = "Volume Up"; + gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + }; + + keyboard-leds { + compatible = "gpio-leds"; + + backlight { + color = ; + default-state = "off"; + function = LED_FUNCTION_KBD_BACKLIGHT; + gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + label = "white:kbd_backlight"; + retain-state-suspended; + }; + + caps-lock { + color = ; + default-state = "off"; + function = LED_FUNCTION_CAPSLOCK; + gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>; + label = "yellow:capslock"; + linux,default-trigger = "kbd-capslock"; + }; + }; + + reserved-memory { + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2000000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + console-size = <0x60000>; + ecc-size = <16>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + }; + }; + + ts_vio_vreg: ts-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "ts_vio_reg"; + startup-delay-us = <2>; + enable-active-high; + gpio = <&tlmm 81 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vio_default>; + regulator-always-on; + }; +}; + +&blsp2_i2c1 { + status = "ok"; + + touchscreen@14 { + compatible = "goodix,gt9286"; + reg = <0x14>; + interrupt-parent = <&tlmm>; + interrupts = <125 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>; + AVDD28-supply = <&vreg_l28_3p0>; + VDDIO-supply = <&ts_vio_vreg>; + pinctrl-names = "active"; + pinctrl-0 = <&ts_rst_n>, <&ts_int_n>; + }; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8998_gpio { + vol_up_pin_a: vol-up-active { + pins = "gpio6"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = "normal"; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = ; + bias-pull-up; + debounce = <15625>; + linux,code = ; + }; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + bias-pull-down; + drive-strength = <2>; + }; + + gpio_kb_pins_extra: gpio-kb-pins-extra { + pins = "gpio21", "gpio32", "gpio33", "gpio114", + "gpio128", "gpio129"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_vio_default: ts-vio-def { + pins = "gpio81"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + ts_rst_n: ts-rst-n { + pins = "gpio89"; + function = "gpio"; + bias-pull-up; + drive-strength = <8>; + }; + + hall_sensor1_default: hall-sensor1-def { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + bias-disable; + drive-strength = <8>; + }; +}; + +&ufshc { + status = "ok"; +}; + +&ufsphy { + status = "ok"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; + extcon = <&extcon_usb>; +}; + +/* GT9286 analog supply */ +&vreg_l28_3p0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts new file mode 100644 index 000000000000..0de919357de4 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-lilac.dts @@ -0,0 +1,30 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1 Compact"; + compatible = "sony,xperia-lilac", "qcom,msm8998"; +}; + +&ibb { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; +}; + +&lab { + regulator-min-microvolt = <5500000>; + regulator-max-microvolt = <5500000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts new file mode 100644 index 000000000000..87115d648cef --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-maple.dts @@ -0,0 +1,54 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ Premium"; + compatible = "sony,xperia-maple", "qcom,msm8998"; + + disp_dvdd_vreg: disp-dvdd-vreg { + compatible = "regulator-fixed"; + regulator-name = "disp_dvdd_en"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&disp_dvdd_en>; + }; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5800000>; + regulator-max-microvolt = <5800000>; + qcom,soft-start-us = <200>; +}; + +&pmi8998_gpio { + disp_dvdd_en: disp-dvdd-en-active { + pins = "gpio10"; + function = "normal"; + bias-disable; + drive-push-pull; + output-high; + power-source = <0>; + qcom,drive-strength = <1>; + }; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts new file mode 100644 index 000000000000..9fa3583c951b --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dts @@ -0,0 +1,35 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + */ + +/dts-v1/; + +#include "msm8998-sony-xperia-yoshino.dtsi" + +/ { + model = "Sony Xperia XZ1"; + compatible = "sony,xperia-poplar", "qcom,msm8998"; +}; + +&ibb { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; +}; + +&lab { + regulator-min-microvolt = <5600000>; + regulator-max-microvolt = <5600000>; + qcom,soft-start-us = <800>; +}; + +&vreg_l18a_2p85 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; +}; + +&vreg_l22a_2p85 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi new file mode 100644 index 000000000000..91e391282181 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi @@ -0,0 +1,670 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, AngeloGioacchino Del Regno + * + * Copyright (c) 2021, Konrad Dybcio + */ + +#include "msm8998.dtsi" +#include "pm8005.dtsi" +#include "pm8998.dtsi" +#include "pmi8998.dtsi" +#include +#include +#include +#include +#include + +/ { + /* required for bootloader to select correct board */ + qcom,msm-id = <0x124 0x20000>, <0x124 0x20001>; /* 8998v2, v2.1 */ + qcom,board-id = <8 0>; + + clocks { + compatible = "simple-bus"; + + div1_mclk: divclk1 { + compatible = "gpio-gate-clock"; + pinctrl-0 = <&audio_mclk_pin>; + pinctrl-names = "default"; + clocks = <&rpmcc RPM_SMD_DIV_CLK1>; + #clock-cells = <0>; + enable-gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; + }; + }; + + board_vbat: vbat-regulator { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <4000000>; + regulator-always-on; + regulator-boot-on; + }; + + cam0_vdig_vreg: cam0-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam0_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 21 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam0_vdig_default>; + }; + + cam1_vdig_vreg: cam1-vdig { + compatible = "regulator-fixed"; + regulator-name = "cam1_vdig"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&tlmm 25 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam1_vdig_default>; + vin-supply = <&vreg_s3a_1p35>; + }; + + cam_vio_vreg: cam-vio-vreg { + compatible = "regulator-fixed"; + regulator-name = "cam_vio_vreg"; + startup-delay-us = <0>; + enable-active-high; + gpio = <&pmi8998_gpio 1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&cam_vio_default>; + vin-supply = <&vreg_lvs1a_1p8>; + }; + + touch_vddio_vreg: touch-vddio-vreg { + compatible = "regulator-fixed"; + regulator-name = "touch_vddio_vreg"; + startup-delay-us = <10000>; + gpio = <&tlmm 133 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_vddio_en>; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + input-name = "gpio-keys"; + label = "Side buttons"; + pinctrl-names = "default"; + pinctrl-0 = <&vol_down_pin_a>, <&cam_focus_pin_a>, + <&cam_snapshot_pin_a>; + vol-down { + label = "Volume Down"; + gpios = <&pm8998_gpio 5 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + }; + + camera-snapshot { + label = "Camera Snapshot"; + gpios = <&pm8998_gpio 7 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + + camera-focus { + label = "Camera Focus"; + gpios = <&pm8998_gpio 8 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + debounce-interval = <15>; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + input-name = "hall-sensors"; + label = "Hall sensors"; + pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor0_default>; + + hall-sensor0 { + label = "Cover Hall Sensor"; + gpios = <&tlmm 124 GPIO_ACTIVE_LOW>; + linux,input-type = ; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <30>; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@85800000 { + reg = <0x0 0x85800000 0x0 0x3700000>; + no-map; + }; + + cont_splash_mem: memory@9d400000 { + reg = <0x0 0x9d400000 0x0 0x2400000>; + no-map; + }; + + zap_shader_region: memory@f6400000 { + compatible = "shared-dma-pool"; + reg = <0x0 0xf6400000 0x0 0x2000>; + no-map; + }; + + adsp_region: memory@fe000000 { + reg = <0x0 0xfe000000 0x0 0x800000>; + no-map; + }; + + qseecom_region: memory@fe800000 { + reg = <0x0 0xfe800000 0x0 0x1400000>; + no-map; + }; + + ramoops@ffc00000 { + compatible = "ramoops"; + reg = <0x0 0xffc00000 0x0 0x100000>; + record-size = <0x10000>; + console-size = <0x60000>; + ftrace-size = <0x10000>; + pmsg-size = <0x20000>; + ecc-size = <16>; + }; + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pmi8998_gpio 5 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vib_default>; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + clock-frequency = <355000>; + + touchscreen@2c { + compatible = "syna,rmi4-i2c"; + reg = <0x2c>; + #address-cells = <1>; + #size-cells = <0>; + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_n>; + + vdd-supply = <&vreg_l28_3p0>; + vio-supply = <&touch_vddio_vreg>; + + syna,reset-delay-ms = <220>; + syna,startup-delay-ms = <1000>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp1_i2c5_sleep { + bias-disable; +}; + +&blsp1_uart3 { + status = "okay"; + + bluetooth { + compatible = "qcom,wcn3990-bt"; + + vddio-supply = <&vreg_s4a_1p8>; + vddxo-supply = <&vreg_l7a_1p8>; + vddrf-supply = <&vreg_l17a_1p3>; + vddch0-supply = <&vreg_l25a_3p3>; + max-speed = <3200000>; + + clocks = <&rpmcc RPM_SMD_RF_CLK2_PIN>; + }; +}; + +&blsp2_uart1 { + status = "okay"; +}; + +&ibb { + regulator-min-microamp = <800000>; + regulator-max-microamp = <800000>; + regulator-enable-ramp-delay = <200>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <600>; + regulator-settling-time-down-us = <1000>; + regulator-soft-start; + qcom,discharge-resistor-kohms = <300>; +}; + +&lab { + regulator-min-microamp = <200000>; + regulator-max-microamp = <200000>; + regulator-enable-ramp-delay = <500>; + regulator-over-current-protection; + regulator-pull-down; + regulator-ramp-delay = <1>; + regulator-settling-time-up-us = <50000>; + regulator-settling-time-down-us = <3000>; + regulator-soft-start; +}; + +&mmcc { + status = "ok"; +}; + +&mmss_smmu { + status = "ok"; +}; + +&pm8005_lsid1 { + pm8005-regulators { + compatible = "qcom,pm8005-regulators"; + + vdd_s1-supply = <&vph_pwr>; + + /* VDD_GFX supply */ + pm8005_s1: s1 { + regulator-min-microvolt = <524000>; + regulator-max-microvolt = <1088000>; + regulator-enable-ramp-delay = <500>; + regulator-always-on; + }; + }; +}; + +&pm8998_gpio { + vol_down_pin_a: vol-down-active { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_focus_pin_a: cam-focus-btn-active { + pins = "gpio7"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + cam_snapshot_pin_a: cam-snapshot-btn-active { + pins = "gpio8"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-pull-up; + input-enable; + qcom,drive-strength = ; + }; + + audio_mclk_pin: audio-mclk-pin-active { + pins = "gpio13"; + function = "func2"; + power-source = <0>; + }; +}; + +&pmi8998_gpio { + cam_vio_default: cam-vio-active { + pins = "gpio1"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <1>; + }; + + vib_default: vib-en { + pins = "gpio5"; + function = PMIC_GPIO_FUNC_NORMAL; + bias-disable; + drive-push-pull; + output-low; + qcom,drive-strength = ; + power-source = <0>; + }; +}; + +&pm8998_pon { + resin { + compatible = "qcom,pm8941-resin"; + interrupts = ; + debounce = <15625>; + bias-pull-up; + linux,code = ; + }; +}; + +&qusb2phy { + status = "okay"; + + vdda-pll-supply = <&vreg_l12a_1p8>; + vdda-phy-dpdm-supply = <&vreg_l24a_3p075>; +}; + +&rpm_requests { + pm8998-regulators { + compatible = "qcom,rpm-pm8998-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_s8-supply = <&vph_pwr>; + vdd_s9-supply = <&vph_pwr>; + vdd_s10-supply = <&vph_pwr>; + vdd_s11-supply = <&vph_pwr>; + vdd_s12-supply = <&vph_pwr>; + vdd_s13-supply = <&vph_pwr>; + vdd_l1_l27-supply = <&vreg_s7a_1p025>; + vdd_l2_l8_l17-supply = <&vreg_s3a_1p35>; + vdd_l3_l11-supply = <&vreg_s7a_1p025>; + vdd_l4_l5-supply = <&vreg_s7a_1p025>; + vdd_l6-supply = <&vreg_s5a_2p04>; + vdd_l7_l12_l14_l15-supply = <&vreg_s5a_2p04>; + vdd_l9-supply = <&vreg_bob>; + vdd_l10_l23_l25-supply = <&vreg_bob>; + vdd_l13_l19_l21-supply = <&vreg_bob>; + vdd_l16_l28-supply = <&vreg_bob>; + vdd_l18_l22-supply = <&vreg_bob>; + vdd_l20_l24-supply = <&vreg_bob>; + vdd_l26-supply = <&vreg_s3a_1p35>; + vdd_lvs1_lvs2-supply = <&vreg_s4a_1p8>; + + vreg_s3a_1p35: s3 { + regulator-min-microvolt = <1352000>; + regulator-max-microvolt = <1352000>; + }; + vreg_s4a_1p8: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <100000>; + regulator-allow-set-load; + }; + vreg_s5a_2p04: s5 { + regulator-min-microvolt = <1904000>; + regulator-max-microvolt = <2032000>; + }; + vreg_s7a_1p025: s7 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1028000>; + }; + vreg_l1a_0p875: l1 { + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-system-load = <73400>; + regulator-allow-set-load; + }; + vreg_l2a_1p2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-system-load = <12560>; + regulator-allow-set-load; + }; + vreg_l3a_1p0: l3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l5a_0p8: l5 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <800000>; + }; + vreg_l6a_1p8: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l7a_1p8: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l8a_1p2: l8 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + vreg_l9a_1p8: l9 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l10a_1p8: l10 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + }; + vreg_l11a_1p0: l11 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + vreg_l12a_1p8: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l13a_2p95: l13 { + regulator-min-microvolt = <1808000>; + regulator-max-microvolt = <2960000>; + regulator-allow-set-load; + }; + vreg_l14a_1p85: l14 { + regulator-min-microvolt = <1848000>; + regulator-max-microvolt = <1856000>; + regulator-system-load = <32000>; + regulator-allow-set-load; + }; + vreg_l15a_1p8: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + vreg_l16a_2p7: l16 { + regulator-min-microvolt = <2704000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l17a_1p3: l17 { + regulator-min-microvolt = <1304000>; + regulator-max-microvolt = <1304000>; + }; + vreg_l18a_2p85: l18 {}; + vreg_l19a_2p7: l19 { + regulator-min-microvolt = <2696000>; + regulator-max-microvolt = <2704000>; + }; + vreg_l20a_2p95: l20 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <10000>; + regulator-allow-set-load; + }; + vreg_l21a_2p95: l21 { + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + vreg_l22a_2p85: l22 { }; + vreg_l23a_3p3: l23 { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l24a_3p075: l24 { + regulator-min-microvolt = <3088000>; + regulator-max-microvolt = <3088000>; + }; + vreg_l25a_3p3: l25 { + regulator-min-microvolt = <3104000>; + regulator-max-microvolt = <3312000>; + }; + vreg_l26a_1p2: l26 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-allow-set-load; + }; + vreg_l28_3p0: l28 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + vreg_lvs1a_1p8: lvs1 { }; + vreg_lvs2a_1p8: lvs2 { }; + }; + + pmi8998-regulators { + compatible = "qcom,rpm-pmi8998-regulators"; + + vdd_bob-supply = <&vph_pwr>; + + vreg_bob: bob { + regulator-min-microvolt = <3312000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc2 { + status = "okay"; + cd-gpios = <&tlmm 95 GPIO_ACTIVE_HIGH>; + + vmmc-supply = <&vreg_l21a_2p95>; + vqmmc-supply = <&vreg_l13a_2p95>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; + + mdp_vsync_n: mdp-vsync-n { + pins = "gpio10"; + function = "mdp_vsync_a"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_ven: nfc-ven { + pins = "gpio12"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; + + msm_mclk0_default: msm-mclk0-active { + pins = "gpio13"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + msm_mclk1_default: msm-mclk1-active { + pins = "gpio14"; + function = "cam_mclk"; + drive-strength = <2>; + bias-disable; + }; + + cci0_default: cci0-default { + pins = "gpio18", "gpio19"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cci1_default: cci1-default { + pins = "gpio19", "gpio20"; + function = "cci_i2c"; + bias-disable; + drive-strength = <2>; + }; + + cam0_vdig_default: cam0-vdig-default { + pins = "gpio21"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + cam1_vdig_default: cam1-vdig-default { + pins = "gpio25"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + }; + + hall_sensor0_default: acc-cover-open { + pins = "gpio124"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + input-enable; + }; + + ts_int_n: ts-int-n { + pins = "gpio125"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_vddio_en: ts-vddio-en-default { + pins = "gpio133"; + function = "gpio"; + bias-disable; + drive-strength = <2>; + output-low; + }; +}; + +/* + * WARNING: + * Disable UFS until card quirks are in to avoid unrecoverable hard-brick + * that would happen as soon as the UFS card gets probed as, without the + * required quirks, the bootloader will be erased right after card probe. + */ +&ufshc { + status = "disabled"; +}; + +&ufsphy { + status = "disabled"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + /* Force to peripheral until we have Type-C hooked up */ + dr_mode = "peripheral"; +}; + +&usb3phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l1a_0p875>; + vdda-pll-supply = <&vreg_l2a_1p2>; +}; diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi index 34039b5c8017..3c1f13385dd7 100644 --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi @@ -4,6 +4,7 @@ #include #include #include +#include #include #include #include @@ -117,7 +118,7 @@ clock-output-names = "xo_board"; }; - sleep_clk { + sleep_clk: sleep-clk { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32764>; @@ -308,38 +309,42 @@ LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 { compatible = "arm,idle-state"; idle-state-name = "little-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <81>; exit-latency-us = <86>; - min-residency-us = <200>; + min-residency-us = <504>; }; LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 { compatible = "arm,idle-state"; idle-state-name = "little-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <273>; - exit-latency-us = <612>; - min-residency-us = <1000>; + entry-latency-us = <814>; + exit-latency-us = <4562>; + min-residency-us = <9183>; local-timer-stop; }; BIG_CPU_SLEEP_0: cpu-sleep-1-0 { compatible = "arm,idle-state"; idle-state-name = "big-retention"; + /* CPU Retention (C2D), L2 Active */ arm,psci-suspend-param = <0x00000002>; entry-latency-us = <79>; exit-latency-us = <82>; - min-residency-us = <200>; + min-residency-us = <1302>; }; BIG_CPU_SLEEP_1: cpu-sleep-1-1 { compatible = "arm,idle-state"; idle-state-name = "big-power-collapse"; + /* CPU + L2 Power Collapse (C3, D4) */ arm,psci-suspend-param = <0x40000003>; - entry-latency-us = <336>; - exit-latency-us = <525>; - min-residency-us = <1000>; + entry-latency-us = <724>; + exit-latency-us = <2027>; + min-residency-us = <9419>; local-timer-stop; }; }; @@ -855,6 +860,9 @@ #reset-cells = <1>; #power-domain-cells = <1>; reg = <0x00100000 0xb0000>; + + clock-names = "xo", "sleep_clk"; + clocks = <&xo>, <&sleep_clk>; }; rpm_msg_ram: memory@778000 { @@ -862,14 +870,14 @@ reg = <0x00778000 0x7000>; }; - qfprom: qfprom@780000 { + qfprom: qfprom@784000 { compatible = "qcom,qfprom"; - reg = <0x00780000 0x621c>; + reg = <0x00784000 0x621c>; #address-cells = <1>; #size-cells = <1>; - qusb2_hstx_trim: hstx-trim@423a { - reg = <0x423a 0x1>; + qusb2_hstx_trim: hstx-trim@23a { + reg = <0x23a 0x1>; bits = <0 4>; }; }; @@ -1416,6 +1424,103 @@ }; }; + adreno_gpu: gpu@5000000 { + compatible = "qcom,adreno-540.1", "qcom,adreno"; + reg = <0x05000000 0x40000>; + reg-names = "kgsl_3d0_reg_memory"; + + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gpucc RBBMTIMER_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>, + <&gpucc RBCPR_CLK>, + <&gpucc GFX3D_CLK>; + clock-names = "iface", + "rbbmtimer", + "mem", + "mem_iface", + "rbcpr", + "core"; + + interrupts = <0 300 IRQ_TYPE_LEVEL_HIGH>; + iommus = <&adreno_smmu 0>; + operating-points-v2 = <&gpu_opp_table>; + power-domains = <&rpmpd MSM8998_VDDMX>; + #stream-id-cells = <16>; + status = "disabled"; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + opp-710000097 { + opp-hz = /bits/ 64 <710000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-670000048 { + opp-hz = /bits/ 64 <670000048>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-596000097 { + opp-hz = /bits/ 64 <596000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-515000097 { + opp-hz = /bits/ 64 <515000097>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-414000000 { + opp-hz = /bits/ 64 <414000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-342000000 { + opp-hz = /bits/ 64 <342000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + + opp-257000000 { + opp-hz = /bits/ 64 <257000000>; + opp-level = ; + opp-supported-hw = <0xFF>; + }; + }; + }; + + adreno_smmu: iommu@5040000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x05040000 0x10000>; + clocks = <&gcc GCC_GPU_CFG_AHB_CLK>, + <&gcc GCC_BIMC_GFX_CLK>, + <&gcc GCC_GPU_BIMC_GFX_CLK>; + clock-names = "iface", "mem", "mem_iface"; + + #global-interrupts = <0>; + #iommu-cells = <1>; + interrupts = + , + , + ; + /* + * GPU-GX GDSC's parent is GPU-CX. We need to bring up the + * GPU-CX for SMMU but we need both of them up for Adreno. + * Contemporarily, we also need to manage the VDDMX rpmpd + * domain in the Adreno driver. + * Enable GPU CX/GX GDSCs here so that we can manage the + * SoC VDDMX RPM Power Domain in the Adreno driver. + */ + power-domains = <&gpucc GPU_GX_GDSC>; + status = "disabled"; + }; + gpucc: clock-controller@5065000 { compatible = "qcom,msm8998-gpucc"; #clock-cells = <1>; @@ -2187,7 +2292,7 @@ #size-cells = <0>; }; - blsp2_dma: dma@c184000 { + blsp2_dma: dma-controller@c184000 { compatible = "qcom,bam-v1.7.0"; reg = <0x0c184000 0x25000>; interrupts = ; @@ -2330,6 +2435,73 @@ #size-cells = <0>; }; + mmcc: clock-controller@c8c0000 { + compatible = "qcom,mmcc-msm8998"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xc8c0000 0x40000>; + status = "disabled"; + + clock-names = "xo", + "gpll0", + "dsi0dsi", + "dsi0byte", + "dsi1dsi", + "dsi1byte", + "hdmipll", + "dplink", + "dpvco", + "core_bi_pll_test_se"; + clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>, + <&gcc GCC_MMSS_GPLL0_CLK>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>, + <0>; + }; + + mmss_smmu: iommu@cd00000 { + compatible = "qcom,msm8998-smmu-v2", "qcom,smmu-v2"; + reg = <0x0cd00000 0x40000>; + #iommu-cells = <1>; + + clocks = <&mmcc MNOC_AHB_CLK>, + <&mmcc BIMC_SMMU_AHB_CLK>, + <&rpmcc RPM_SMD_MMAXI_CLK>, + <&mmcc BIMC_SMMU_AXI_CLK>; + clock-names = "iface-mm", "iface-smmu", + "bus-mm", "bus-smmu"; + status = "disabled"; + + #global-interrupts = <0>; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + remoteproc_adsp: remoteproc@17300000 { compatible = "qcom,msm8998-adsp-pas"; reg = <0x17300000 0x4040>; diff --git a/arch/arm64/boot/dts/qcom/pm6150l.dtsi b/arch/arm64/boot/dts/qcom/pm6150l.dtsi index b49860cd1387..3ca2860bb0cf 100644 --- a/arch/arm64/boot/dts/qcom/pm6150l.dtsi +++ b/arch/arm64/boot/dts/qcom/pm6150l.dtsi @@ -1,6 +1,7 @@ // SPDX-License-Identifier: BSD-3-Clause // Copyright (c) 2019, The Linux Foundation. All rights reserved. +#include #include #include diff --git a/arch/arm64/boot/dts/qcom/pm660.dtsi b/arch/arm64/boot/dts/qcom/pm660.dtsi index e847d7209afc..d0ef8a1675e2 100644 --- a/arch/arm64/boot/dts/qcom/pm660.dtsi +++ b/arch/arm64/boot/dts/qcom/pm660.dtsi @@ -49,9 +49,10 @@ }; pon: pon@800 { - compatible = "qcom,pm8916-pon"; - + compatible = "qcom,pm8998-pon"; reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; pwrkey { compatible = "qcom,pm8941-pwrkey"; diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi index c566a64b1373..0df76f7b1cc1 100644 --- a/arch/arm64/boot/dts/qcom/pm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi @@ -48,8 +48,10 @@ #size-cells = <0>; pon: power-on@800 { - compatible = "qcom,pm8916-pon"; + compatible = "qcom,pm8998-pon"; reg = <0x0800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; pon_pwrkey: pwrkey { compatible = "qcom,pm8941-pwrkey"; diff --git a/arch/arm64/boot/dts/qcom/pm8916.dtsi b/arch/arm64/boot/dts/qcom/pm8916.dtsi index f931cb0de231..48c6c9cca53b 100644 --- a/arch/arm64/boot/dts/qcom/pm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8916.dtsi @@ -41,6 +41,14 @@ }; }; + pm8916_usbin: extcon@1300 { + compatible = "qcom,pm8941-misc"; + reg = <0x1300>; + interrupts = <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>; + interrupt-names = "usb_vbus"; + status = "disabled"; + }; + pm8916_temp: temp-alarm@2400 { compatible = "qcom,spmi-temp-alarm"; reg = <0x2400>; @@ -86,7 +94,6 @@ rtc@6000 { compatible = "qcom,pm8941-rtc"; reg = <0x6000>; - reg-names = "rtc", "alarm"; interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; }; diff --git a/arch/arm64/boot/dts/qcom/pmi8998.dtsi b/arch/arm64/boot/dts/qcom/pmi8998.dtsi index d230c510d4b7..0fef5f113f05 100644 --- a/arch/arm64/boot/dts/qcom/pmi8998.dtsi +++ b/arch/arm64/boot/dts/qcom/pmi8998.dtsi @@ -41,5 +41,17 @@ interrupt-names = "sc-err", "ocp"; }; }; + + pmi8998_wled: leds@d800 { + compatible = "qcom,pmi8998-wled"; + reg = <0xd800 0xd900>; + interrupts = <0x3 0xd8 0x1 IRQ_TYPE_EDGE_RISING>, + <0x3 0xd8 0x2 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ovp", "short"; + label = "backlight"; + + status = "disabled"; + }; + }; }; diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 8ac96f8e79d4..28d5b5528516 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -804,6 +804,16 @@ }; }; +&pon_pwrkey { + status = "okay"; +}; + +&pon_resin { + status = "okay"; + + linux,code = ; +}; + &qupv3_id_0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts index 21b516e0694a..8290d036044a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz-r1.dts @@ -23,6 +23,20 @@ status = "disabled"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ skin-temp-thermistor@4e; + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; + /delete-node/ skin-temp-thermistor@1; +}; + /* * CoachZ rev1 is stuffed with a 47k NTC as thermistor for skin temperature, * which currently is not supported by the PM6150 ADC driver. Disable the diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi index a758e4d22612..81098aa9687b 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-coachz.dtsi @@ -33,7 +33,7 @@ ap_h1_spi: &spi0 {}; polling-delay = <0>; thermal-sensors = <&pm6150_adc_tm 1>; - sustainable-power = <814>; + sustainable-power = <965>; trips { skin_temp_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts new file mode 100644 index 000000000000..db6c2da67cea --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r2.dts @@ -0,0 +1,20 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev2)"; + compatible = "google,homestar-rev2","google,homestar-rev23", "qcom,sc7180"; +}; + +&panel { + /delete-property/hpd-gpios; + no-hpd; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts new file mode 100644 index 000000000000..3fd8aa5bb7a6 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar-r3.dts @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +/dts-v1/; + +#include "sc7180-trogdor-homestar.dtsi" + +/ { + model = "Google Homestar (rev3+)"; + compatible = "google,homestar", "qcom,sc7180"; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi new file mode 100644 index 000000000000..382f8c6f1576 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-homestar.dtsi @@ -0,0 +1,335 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Google Homestar board device tree source + * + * Copyright 2021 Google LLC. + */ + +#include "sc7180.dtsi" + +ap_ec_spi: &spi6 {}; +ap_h1_spi: &spi0 {}; + +#include "sc7180-trogdor.dtsi" + +/ { + /* BOARD-SPECIFIC TOP LEVEL NODES */ + + max98360a_1: max98360a_1 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_2: max98360a_2 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + max98360a_3: max98360a_3 { + compatible = "maxim,max98360a"; + #sound-dai-cells = <0>; + }; + + pp3300_touch: pp3300-touch { + compatible = "regulator-fixed"; + regulator-name = "pp3300_touch"; + + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 87 GPIO_ACTIVE_HIGH>; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&en_pp3300_touch>; + + vin-supply = <&pp3300_a>; + }; + + thermal-zones { + skin_temp_thermal: skin-temp-thermal { + polling-delay-passive = <250>; + polling-delay = <0>; + + thermal-sensors = <&pm6150_adc_tm 1>; + sustainable-power = <965>; + + trips { + skin_temp_alert0: trip-point0 { + temperature = <55000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin_temp_alert1: trip-point1 { + temperature = <58000>; + hysteresis = <1000>; + type = "passive"; + }; + + skin-temp-crit { + temperature = <73000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&skin_temp_alert0>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&skin_temp_alert1>; + cooling-device = <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; +}; + +&ap_tp_i2c { + status = "disabled"; +}; + +ap_ts_pen_1v8: &i2c4 { + status = "okay"; + clock-frequency = <400000>; + + ap_ts: touchscreen@14 { + compatible = "goodix,gt7375p"; + reg = <0x14>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; + + interrupt-parent = <&tlmm>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; + + vdd-supply = <&pp3300_touch>; + }; +}; + +/* Panel controls backlight over aux channel */ + +&backlight { + status = "disabled"; +}; + +&camcc { + status = "okay"; +}; + +&panel { + compatible = "samsung,atna33xc20"; + enable-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>; + /delete-property/ backlight; +}; + +&pm6150_adc { + skin-temp-thermistor@4d { + reg = ; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; +}; + +&pm6150_adc_tm { + status = "okay"; + + skin-temp-thermistor@1 { + reg = <1>; + io-channels = <&pm6150_adc ADC5_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; +}; + +&pp3300_dx_edp { + gpio = <&tlmm 67 GPIO_ACTIVE_HIGH>; +}; + +&secondary_mi2s { + qcom,playback-sd-lines = <0 1>; +}; + +&sound_multimedia1_codec { + sound-dai = <&max98360a>, <&max98360a_1>, <&max98360a_2>, <&max98360a_3> ; +}; + +&wifi { + qcom,ath10k-calibration-variant = "GO_HOMESTAR"; +}; + +/* PINCTRL - modifications to sc7180-trogdor.dtsi */ + +&en_pp3300_dx_edp { + pinmux { + pins = "gpio67"; + }; + + pinconf { + pins = "gpio67"; + }; +}; + +&sec_mi2s_active{ + pinmux { + pins = "gpio49", "gpio50", "gpio51", "gpio52"; + function = "mi2s_1"; + }; +}; + +&ts_reset_l { + pinconf { + /* + * We want reset state by default and it will be up to the + * driver to disable this when it's ready. + */ + output-low; + }; +}; + +/* PINCTRL - board-specific pinctrl */ + +&tlmm { + gpio-line-names = "HUB_RST_L", + "AP_RAM_ID0", + "AP_SKU_ID2", + "AP_RAM_ID1", + "", + "AP_RAM_ID2", + "UF_CAM_EN", + "WF_CAM_EN", + "TS_RESET_L", + "TS_INT_L", + "", + "EDP_BRIJ_IRQ", + "AP_EDP_BKLTEN", + "UF_CAM_MCLK", + "WF_CAM_CLK", + "EDP_BRIJ_I2C_SDA", + "EDP_BRIJ_I2C_SCL", + "UF_CAM_SDA", + "UF_CAM_SCL", + "WF_CAM_SDA", + "WF_CAM_SCL", + "AVEE_LCD_EN", + "", + "AMP_EN", + "AMP_EN2", + "AP_SAR_SENSOR_SDA", + "AP_SAR_SENSOR_SCL", + "SEL_LCM", + "HP_IRQ", + "WF_CAM_RST_L", + "UF_CAM_RST_L", + "AP_BRD_ID2", + "BRIJ_SUSPEND", + "AP_BRD_ID0", + "AP_H1_SPI_MISO", + "AP_H1_SPI_MOSI", + "AP_H1_SPI_CLK", + "AP_H1_SPI_CS_L", + "BT_UART_CTS", + "BT_UART_RTS", + "BT_UART_TXD", + "BT_UART_RXD", + "H1_AP_INT_ODL", + "", + "UART_AP_TX_DBG_RX", + "UART_DBG_TX_AP_RX", + "HP_I2C_SDA", + "HP_I2C_SCL", + "FORCED_USB_BOOT", + "AMP_BCLK", + "AMP_LRCLK", + "AMP_DIN", + "AMP_DIN_2", + "HP_BCLK", + "HP_LRCLK", + "HP_DOUT", + "HP_DIN", + "HP_MCLK", + "AP_SKU_ID0", + "AP_EC_SPI_MISO", + "AP_EC_SPI_MOSI", + "AP_EC_SPI_CLK", + "AP_EC_SPI_CS_L", + "AP_SPI_CLK", + "AP_SPI_MOSI", + "AP_SPI_MISO", + /* + * AP_FLASH_WP_L is crossystem ABI. Schematics + * call it BIOS_FLASH_WP_L. + */ + "AP_FLASH_WP_L", + "EN_PP3300_DX_EDP", + "AP_SPI_CS0_L", + "SD_CD_ODL", + "", + "", + "", + "WLAN_SW_CTRL", + "", + "REPORT_E", + "VDD_RESET_1.8V", + "ID0", + "", + "ID1", + "AVDD_LCD_EN", + "MIPI_1.8V_EN", + "", + "CODEC_PWR_EN", + "HUB_EN", + "", + "PP1800_MIPI_SW_EN", + "EN_PP3300_TOUCH", + "", + "", + "AP_SKU_ID1", + "AP_RST_REQ", + "", + "AP_BRD_ID1", + "AP_EC_INT_L", + "SDM_GRFC_3", + "", + "", + "BOOT_CONFIG_4", + "BOOT_CONFIG_2", + "", + "", + "", + "", + "EDP_BRIJ_EN", + "", + "", + "BOOT_CONFIG_3", + "WCI2_LTE_COEX_TXD", + "WCI2_LTE_COEX_RXD", + "", + "", + "", + "", + "FORCED_USB_BOOT_POL", + "AP_TS_PEN_I2C_SDA", + "AP_TS_PEN_I2C_SCL", + "DP_HOT_PLUG_DET", + "EC_IN_RW_ODL"; + + en_pp3300_touch: en-pp3300-touch { + pinmux { + pins = "gpio87"; + function = "gpio"; + }; + + pinconf { + pins = "gpio87"; + drive-strength = <2>; + bias-disable; + }; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi index 00535aaa43c9..86c9e750995f 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lazor.dtsi @@ -54,6 +54,18 @@ ap_ts_pen_1v8: &i2c4 { compatible = "boe,nv133fhm-n62"; }; +&pm6150_adc { + status = "disabled"; + + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + status = "disabled"; + + /delete-node/ charger-thermistor@0; +}; + &trackpad { interrupts = <58 IRQ_TYPE_EDGE_FALLING>; }; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi index 469aad4e5948..fd4b71203754 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-lte-sku.dtsi @@ -17,3 +17,14 @@ firmware-name = "qcom/sc7180-trogdor/modem/mba.mbn", "qcom/sc7180-trogdor/modem/qdsp6sw.mbn"; }; + +&ipa { + status = "okay"; + + /* + * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the + * modem needs to cover certain init steps (GSI init), and + * the AP needs to wait for it. + */ + modem-init; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts index e122a6b481ff..76a130bad60a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r1.dts @@ -26,6 +26,14 @@ status = "disabled"; }; +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; + &pp3300_hub { /* pp3300_l7c is used to power the USB hub */ /delete-property/regulator-always-on; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts index 4f32e6733f4c..88cf2246c18a 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom-r2.dts @@ -22,3 +22,11 @@ &charger_thermal { status = "disabled"; }; + +&pm6150_adc { + /delete-node/ charger-thermistor@4f; +}; + +&pm6150_adc_tm { + /delete-node/ charger-thermistor@0; +}; diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi index a246dbd74cc1..b7b5264888b7 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-pompom.dtsi @@ -44,7 +44,7 @@ ap_h1_spi: &spi0 {}; }; &cpu6_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu7_alert0 { @@ -56,7 +56,7 @@ ap_h1_spi: &spi0 {}; }; &cpu7_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu8_alert0 { @@ -68,7 +68,7 @@ ap_h1_spi: &spi0 {}; }; &cpu8_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &cpu9_alert0 { @@ -80,7 +80,7 @@ ap_h1_spi: &spi0 {}; }; &cpu9_thermal { - sustainable-power = <948>; + sustainable-power = <1124>; }; &gpio_keys { diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi index 0f2b3c00e434..8685931553b3 100644 --- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi @@ -751,17 +751,6 @@ hp_i2c: &i2c9 { }; }; -&ipa { - status = "okay"; - - /* - * Trogdor doesn't have QHEE (Qualcomm's EL2 blob), so the - * modem needs to cover certain init steps (GSI init), and - * the AP needs to wait for it. - */ - modem-init; -}; - &lpass_cpu { status = "okay"; @@ -1524,13 +1513,13 @@ ap_spi_fp: &spi10 { pinconf-cmd { pins = "sdc1_cmd"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-data { pins = "sdc1_data"; bias-pull-up; - drive-strength = <10>; + drive-strength = <16>; }; pinconf-rclk { diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi index c8921e2d6480..f10217c0e70c 100644 --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -137,8 +136,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, <&osm_l3 MASTER_OSM_L3_APPS &osm_l3 SLAVE_OSM_L3>; @@ -162,8 +161,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_100>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -184,8 +183,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_200>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -206,8 +205,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_300>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -228,8 +227,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_400>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -250,8 +249,8 @@ cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1024>; - dynamic-power-coefficient = <100>; + capacity-dmips-mhz = <415>; + dynamic-power-coefficient = <137>; next-level-cache = <&L2_500>; operating-points-v2 = <&cpu0_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -272,8 +271,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_600>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -294,8 +293,8 @@ cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1 &CLUSTER_SLEEP_0>; - capacity-dmips-mhz = <1740>; - dynamic-power-coefficient = <405>; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <480>; next-level-cache = <&L2_700>; operating-points-v2 = <&cpu6_opp_table>; interconnects = <&gem_noc MASTER_APPSS_PROC 3 &mc_virt SLAVE_EBI1 3>, @@ -1922,14 +1921,15 @@ clock-names = "iface", "bus", "nav", "snoc_axi", "mnoc_axi", "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd SC7180_CX>, + power-domains = <&rpmhpd SC7180_CX>, <&rpmhpd SC7180_MX>, <&rpmhpd SC7180_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -3224,7 +3224,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; }; spmi_bus: spmi@c440000 { @@ -3246,6 +3245,21 @@ cell-index = <0>; }; + imem@146aa000 { + compatible = "simple-mfd"; + reg = <0 0x146aa000 0 0x2000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146aa000 0x2000>; + + pil-reloc@94c { + compatible = "qcom,pil-reloc-info"; + reg = <0x94c 0xc8>; + }; + }; + apps_smmu: iommu@15000000 { compatible = "qcom,sc7180-smmu-500", "arm,mmu-500"; reg = <0 0x15000000 0 0x100000>; @@ -3616,7 +3630,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 1>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu0_alert0: trip-point0 { @@ -3665,7 +3679,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 2>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu1_alert0: trip-point0 { @@ -3714,7 +3728,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 3>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu2_alert0: trip-point0 { @@ -3763,7 +3777,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 4>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu3_alert0: trip-point0 { @@ -3812,7 +3826,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 5>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu4_alert0: trip-point0 { @@ -3861,7 +3875,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 6>; - sustainable-power = <768>; + sustainable-power = <1052>; trips { cpu5_alert0: trip-point0 { @@ -3910,7 +3924,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 9>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu6_alert0: trip-point0 { @@ -3951,7 +3965,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 10>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu7_alert0: trip-point0 { @@ -3992,7 +4006,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 11>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu8_alert0: trip-point0 { @@ -4033,7 +4047,7 @@ polling-delay = <0>; thermal-sensors = <&tsens0 12>; - sustainable-power = <1202>; + sustainable-power = <1425>; trips { cpu9_alert0: trip-point0 { diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi index 371a2a9dcf7a..272d5ca957dc 100644 --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi @@ -7,11 +7,84 @@ #include #include +#include #include "sc7280.dtsi" #include "pm7325.dtsi" #include "pm8350c.dtsi" #include "pmk8350.dtsi" +/ { + gpio-keys { + compatible = "gpio-keys"; + label = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&key_vol_up_default>; + + volume-up { + label = "volume_up"; + gpios = <&pm7325_gpios 6 GPIO_ACTIVE_LOW>; + linux,input-type = <1>; + linux,code = ; + gpio-key,wakeup; + debounce-interval = <15>; + linux,can-disable; + }; + }; +}; + +/* + * Reserved memory changes + * + * Delete all unused memory nodes and define the peripheral memory regions + * required by the board dts. + * + */ + +/delete-node/ &hyp_mem; +/delete-node/ &xbl_mem; +/delete-node/ &reserved_xbl_uefi_log; +/delete-node/ &sec_apps_mem; + +/* Increase the size from 2.5MB to 8MB */ +&rmtfs_mem { + reg = <0x0 0x9c900000 0x0 0x800000>; +}; + +/ { + reserved-memory { + adsp_mem: memory@86700000 { + reg = <0x0 0x86700000 0x0 0x2800000>; + no-map; + }; + + camera_mem: memory@8ad00000 { + reg = <0x0 0x8ad00000 0x0 0x500000>; + no-map; + }; + + venus_mem: memory@8b200000 { + reg = <0x0 0x8b200000 0x0 0x500000>; + no-map; + }; + + mpss_mem: memory@8b800000 { + reg = <0x0 0x8b800000 0x0 0xf600000>; + no-map; + }; + + wpss_mem: memory@9ae00000 { + reg = <0x0 0x9ae00000 0x0 0x1900000>; + no-map; + }; + + mba_mem: memory@9c700000 { + reg = <0x0 0x9c700000 0x0 0x200000>; + no-map; + }; + }; +}; + &apps_rsc { pm7325-regulators { compatible = "qcom,pm7325-rpmh-regulators"; @@ -207,10 +280,39 @@ }; }; +&qfprom { + vcc-supply = <&vreg_l1c_1p8>; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data01>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <37500000>; + spi-tx-bus-width = <2>; + spi-rx-bus-width = <2>; + }; +}; + &qupv3_id_0 { status = "okay"; }; +&qupv3_id_1 { + status = "okay"; +}; + +&remoteproc_mpss { + status = "okay"; + compatible = "qcom,sc7280-mss-pil"; + iommus = <&apps_smmu 0x124 0x0>, <&apps_smmu 0x488 0x7>; + memory-region = <&mba_mem &mpss_mem>; +}; + &sdhc_1 { status = "okay"; @@ -240,6 +342,7 @@ }; &uart5 { + compatible = "qcom,geni-debug-uart"; status = "okay"; }; @@ -282,18 +385,123 @@ vdda18-supply = <&vreg_l1c_1p8>; }; +&uart7 { + status = "okay"; + + /delete-property/interrupts; + interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>, + <&tlmm 31 IRQ_TYPE_EDGE_FALLING>; + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&qup_uart7_sleep_cts>, <&qup_uart7_sleep_rts>, <&qup_uart7_sleep_tx>, <&qup_uart7_sleep_rx>; +}; + /* PINCTRL - additions to nodes defined in sc7280.dtsi */ -&qup_uart5_default { - tx { - pins = "gpio46"; - drive-strength = <2>; - bias-disable; +&pm7325_gpios { + key_vol_up_default: key-vol-up-default { + pins = "gpio6"; + function = "normal"; + input-enable; + bias-pull-up; + power-source = <0>; + qcom,drive-strength = <3>; + }; +}; + +&qspi_cs0 { + bias-disable; +}; + +&qspi_clk { + bias-disable; +}; + +&qspi_data01 { + /* High-Z when no transfers; nice to park the lines */ + bias-pull-up; +}; + +&qup_uart5_tx { + drive-strength = <2>; + bias-disable; +}; + +&qup_uart5_rx { + drive-strength = <2>; + bias-pull-up; +}; + +&qup_uart7_cts { + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; +}; + +&qup_uart7_rts { + /* We'll drive RTS, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_tx { + /* We'll drive TX, so no pull */ + drive-strength = <2>; + bias-disable; +}; + +&qup_uart7_rx { + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module is + * in tri-state (module powered off or not driving the + * signal yet). + */ + bias-pull-up; +}; + +&tlmm { + qup_uart7_sleep_cts: qup-uart7-sleep-cts { + pins = "gpio28"; + function = "gpio"; + /* + * Configure a pull-down on CTS to match the pull of + * the Bluetooth module. + */ + bias-pull-down; }; - rx { - pins = "gpio47"; - drive-strength = <2>; + qup_uart7_sleep_rts: qup-uart7-sleep-rts { + pins = "gpio29"; + function = "gpio"; + /* + * Configure pull-down on RTS. As RTS is active low + * signal, pull it low to indicate the BT SoC that it + * can wakeup the system anytime from suspend state by + * pulling RX low (by sending wakeup bytes). + */ + bias-pull-down; + }; + + qup_uart7_sleep_tx: qup-uart7-sleep-tx { + pins = "gpio30"; + function = "gpio"; + /* + * Configure pull-up on TX when it isn't actively driven + * to prevent BT SoC from receiving garbage during sleep. + */ + bias-pull-up; + }; + + qup_uart7_sleep_rx: qup-uart7-sleep-rx { + pins = "gpio31"; + function = "gpio"; + /* + * Configure a pull-up on RX. This is needed to avoid + * garbage data when the TX pin of the Bluetooth module + * is floating which may cause spurious wakeups. + */ bias-pull-up; }; }; @@ -336,6 +544,7 @@ }; sd-cd { + pins = "gpio91"; bias-pull-up; }; }; diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi index 53a21d086178..24956570eb8e 100644 --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi @@ -5,12 +5,14 @@ * Copyright (c) 2020-2021, The Linux Foundation. All rights reserved. */ +#include #include +#include #include +#include #include #include #include -#include #include #include #include @@ -26,8 +28,40 @@ chosen { }; aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + i2c6 = &i2c6; + i2c7 = &i2c7; + i2c8 = &i2c8; + i2c9 = &i2c9; + i2c10 = &i2c10; + i2c11 = &i2c11; + i2c12 = &i2c12; + i2c13 = &i2c13; + i2c14 = &i2c14; + i2c15 = &i2c15; mmc1 = &sdhc_1; mmc2 = &sdhc_2; + spi0 = &spi0; + spi1 = &spi1; + spi2 = &spi2; + spi3 = &spi3; + spi4 = &spi4; + spi5 = &spi5; + spi6 = &spi6; + spi7 = &spi7; + spi8 = &spi8; + spi9 = &spi9; + spi10 = &spi10; + spi11 = &spi11; + spi12 = &spi12; + spi13 = &spi13; + spi14 = &spi14; + spi15 = &spi15; }; clocks { @@ -49,6 +83,16 @@ #size-cells = <2>; ranges; + hyp_mem: memory@80000000 { + reg = <0x0 0x80000000 0x0 0x600000>; + no-map; + }; + + xbl_mem: memory@80600000 { + reg = <0x0 0x80600000 0x0 0x200000>; + no-map; + }; + aop_mem: memory@80800000 { reg = <0x0 0x80800000 0x0 0x60000>; no-map; @@ -60,6 +104,16 @@ no-map; }; + reserved_xbl_uefi_log: memory@80880000 { + reg = <0x0 0x80884000 0x0 0x10000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0x0 0x808ff000 0x0 0x1000>; + no-map; + }; + smem_mem: memory@80900000 { reg = <0x0 0x80900000 0x0 0x200000>; no-map; @@ -70,10 +124,24 @@ reg = <0x0 0x80b00000 0x0 0x100000>; }; + wlan_fw_mem: memory@80c00000 { + reg = <0x0 0x80c00000 0x0 0xc00000>; + no-map; + }; + ipa_fw_mem: memory@8b700000 { reg = <0 0x8b700000 0 0x10000>; no-map; }; + + rmtfs_mem: memory@9c900000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x9c900000 0x0 0x280000>; + no-map; + + qcom,client-id = <1>; + qcom,vmid = <15>; + }; }; cpus { @@ -219,6 +287,42 @@ }; }; + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + idle-states { entry-method = "psci"; @@ -415,6 +519,44 @@ method = "smc"; }; + qspi_opp_table: qspi-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-150000000 { + opp-hz = /bits/ 64 <150000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + + qup_opp_table: qup-opp-table { + compatible = "operating-points-v2"; + + opp-75000000 { + opp-hz = /bits/ 64 <75000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs>; + }; + + opp-128000000 { + opp-hz = /bits/ 64 <128000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + soc: soc@0 { #address-cells = <2>; #size-cells = <2>; @@ -517,22 +659,857 @@ qupv3_id_0: geniqup@9c0000 { compatible = "qcom,geni-se-qup"; reg = <0 0x009c0000 0 0x2000>; - clock-names = "m-ahb", "s-ahb"; clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>, <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; #address-cells = <2>; #size-cells = <2>; ranges; + iommus = <&apps_smmu 0x123 0x0>; status = "disabled"; - uart5: serial@994000 { - compatible = "qcom,geni-debug-uart"; - reg = <0 0x00994000 0 0x4000>; + i2c0: i2c@980000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; clock-names = "se"; - clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; pinctrl-names = "default"; - pinctrl-0 = <&qup_uart5_default>; + pinctrl-0 = <&qup_i2c0_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi0: spi@980000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart0: serial@980000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00980000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart0_cts>, <&qup_uart0_rts>, <&qup_uart0_tx>, <&qup_uart0_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c1: i2c@984000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c1_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi1: spi@984000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart1: serial@984000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00984000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart1_cts>, <&qup_uart1_rts>, <&qup_uart1_tx>, <&qup_uart1_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c2: i2c@988000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c2_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi2: spi@988000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart2: serial@988000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00988000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart2_cts>, <&qup_uart2_rts>, <&qup_uart2_tx>, <&qup_uart2_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c3: i2c@98c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c3_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi3: spi@98c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart3: serial@98c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0098c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart3_cts>, <&qup_uart3_rts>, <&qup_uart3_tx>, <&qup_uart3_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c4: i2c@990000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c4_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi4: spi@990000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart4: serial@990000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00990000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart4_cts>, <&qup_uart4_rts>, <&qup_uart4_tx>, <&qup_uart4_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c5: i2c@994000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c5_data_clk>; interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi5: spi@994000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart5: serial@994000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00994000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart5_cts>, <&qup_uart5_rts>, <&qup_uart5_tx>, <&qup_uart5_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c6: i2c@998000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c6_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi6: spi@998000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart6: serial@998000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00998000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart6_cts>, <&qup_uart6_rts>, <&qup_uart6_tx>, <&qup_uart6_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c7: i2c@99c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c7_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>, + <&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi7: spi@99c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi7_data_clk>, <&qup_spi7_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart7: serial@99c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x0099c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart7_cts>, <&qup_uart7_rts>, <&qup_uart7_tx>, <&qup_uart7_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_0 0 &clk_virt SLAVE_QUP_CORE_0 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_0 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + }; + + qupv3_id_1: geniqup@ac0000 { + compatible = "qcom,geni-se-qup"; + reg = <0 0x00ac0000 0 0x2000>; + clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>, + <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>; + clock-names = "m-ahb", "s-ahb"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + iommus = <&apps_smmu 0x43 0x0>; + status = "disabled"; + + i2c8: i2c@a80000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c8_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi8: spi@a80000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart8: serial@a80000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a80000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart8_cts>, <&qup_uart8_rts>, <&qup_uart8_tx>, <&qup_uart8_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c9: i2c@a84000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c9_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi9: spi@a84000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart9: serial@a84000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a84000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart9_cts>, <&qup_uart9_rts>, <&qup_uart9_tx>, <&qup_uart9_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c10: i2c@a88000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c10_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi10: spi@a88000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart10: serial@a88000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a88000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart10_cts>, <&qup_uart10_rts>, <&qup_uart10_tx>, <&qup_uart10_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c11: i2c@a8c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c11_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi11: spi@a8c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart11: serial@a8c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a8c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart11_cts>, <&qup_uart11_rts>, <&qup_uart11_tx>, <&qup_uart11_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c12: i2c@a90000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c12_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi12: spi@a90000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart12: serial@a90000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a90000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart12_cts>, <&qup_uart12_rts>, <&qup_uart12_tx>, <&qup_uart12_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c13: i2c@a94000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c13_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi13: spi@a94000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart13: serial@a94000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a94000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart13_cts>, <&qup_uart13_rts>, <&qup_uart13_tx>, <&qup_uart13_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c14: i2c@a98000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c14_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi14: spi@a98000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi14_data_clk>, <&qup_spi14_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart14: serial@a98000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a98000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart14_cts>, <&qup_uart14_rts>, <&qup_uart14_tx>, <&qup_uart14_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + i2c15: i2c@a9c000 { + compatible = "qcom,geni-i2c"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_i2c15_data_clk>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>, + <&aggre2_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "qup-core", "qup-config", + "qup-memory"; + status = "disabled"; + }; + + spi15: spi@a9c000 { + compatible = "qcom,geni-spi"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; + status = "disabled"; + }; + + uart15: serial@a9c000 { + compatible = "qcom,geni-uart"; + reg = <0 0x00a9c000 0 0x4000>; + clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>; + clock-names = "se"; + pinctrl-names = "default"; + pinctrl-0 = <&qup_uart15_cts>, <&qup_uart15_rts>, <&qup_uart15_tx>, <&qup_uart15_rx>; + interrupts = ; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qup_opp_table>; + interconnects = <&clk_virt MASTER_QUP_CORE_1 0 &clk_virt SLAVE_QUP_CORE_1 0>, + <&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_QUP_1 0>; + interconnect-names = "qup-core", "qup-config"; status = "disabled"; }; }; @@ -598,8 +1575,8 @@ "ipa-shared", "gsi"; - interrupts-extended = <&intc 0 654 IRQ_TYPE_EDGE_RISING>, - <&intc 0 432 IRQ_TYPE_LEVEL_HIGH>, + interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>, <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ipa", @@ -629,6 +1606,11 @@ #hwlock-cells = <1>; }; + tcsr: syscon@1fc0000 { + compatible = "qcom,sc7280-tcsr", "syscon"; + reg = <0 0x01fc0000 0 0x30000>; + }; + lpasscc: lpasscc@3000000 { compatible = "qcom,sc7280-lpasscc"; reg = <0 0x03000000 0 0x40>, @@ -647,6 +1629,86 @@ qcom,bcm-voters = <&apps_bcm_voter>; }; + gpu: gpu@3d00000 { + compatible = "qcom,adreno-635.0", "qcom,adreno"; + #stream-id-cells = <16>; + reg = <0 0x03d00000 0 0x40000>, + <0 0x03d9e000 0 0x1000>, + <0 0x03d61000 0 0x800>; + reg-names = "kgsl_3d0_reg_memory", + "cx_mem", + "cx_dbgc"; + interrupts = ; + iommus = <&adreno_smmu 0 0x401>; + operating-points-v2 = <&gpu_opp_table>; + qcom,gmu = <&gmu>; + interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>; + interconnect-names = "gfx-mem"; + #cooling-cells = <2>; + + gpu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-315000000 { + opp-hz = /bits/ 64 <315000000>; + opp-level = ; + opp-peak-kBps = <1804000>; + }; + + opp-450000000 { + opp-hz = /bits/ 64 <450000000>; + opp-level = ; + opp-peak-kBps = <4068000>; + }; + + opp-550000000 { + opp-hz = /bits/ 64 <550000000>; + opp-level = ; + opp-peak-kBps = <6832000>; + }; + }; + }; + + gmu: gmu@3d69000 { + compatible="qcom,adreno-gmu-635.0", "qcom,adreno-gmu"; + reg = <0 0x03d6a000 0 0x34000>, + <0 0x3de0000 0 0x10000>, + <0 0x0b290000 0 0x10000>; + reg-names = "gmu", "rscc", "gmu_pdc"; + interrupts = , + ; + interrupt-names = "hfi", "gmu"; + clocks = <&gpucc 5>, + <&gpucc 8>, + <&gcc GCC_DDRSS_GPU_AXI_CLK>, + <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gpucc 2>, + <&gpucc 15>, + <&gpucc 11>; + clock-names = "gmu", + "cxo", + "axi", + "memnoc", + "ahb", + "hub", + "smmu_vote"; + power-domains = <&gpucc 0>, + <&gpucc 1>; + power-domain-names = "cx", + "gx"; + iommus = <&adreno_smmu 5 0x400>; + operating-points-v2 = <&gmu_opp_table>; + + gmu_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-level = ; + }; + }; + }; + gpucc: clock-controller@3d90000 { compatible = "qcom,sc7280-gpucc"; reg = <0 0x03d90000 0 0x9000>; @@ -661,6 +1723,95 @@ #power-domain-cells = <1>; }; + adreno_smmu: iommu@3da0000 { + compatible = "qcom,sc7280-smmu-500", "qcom,adreno-smmu", "arm,mmu-500"; + reg = <0 0x03da0000 0 0x20000>; + #iommu-cells = <2>; + #global-interrupts = <2>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + ; + + clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>, + <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>, + <&gpucc 2>, + <&gpucc 11>, + <&gpucc 5>, + <&gpucc 15>, + <&gpucc 13>; + clock-names = "gcc_gpu_memnoc_gfx_clk", + "gcc_gpu_snoc_dvm_gfx_clk", + "gpu_cc_ahb_clk", + "gpu_cc_hlos1_vote_gpu_smmu_clk", + "gpu_cc_cx_gmu_clk", + "gpu_cc_hub_cx_int_clk", + "gpu_cc_hub_aon_clk"; + + power-domains = <&gpucc 0>; + }; + + remoteproc_mpss: remoteproc@4080000 { + compatible = "qcom,sc7280-mpss-pas"; + reg = <0 0x04080000 0 0x10000>, <0 0x04180000 0 0x48>; + reg-names = "qdsp6", "rmb"; + + interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", "handover", + "stop-ack", "shutdown-ack"; + + clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, + <&gcc GCC_MSS_OFFLINE_AXI_CLK>, + <&gcc GCC_MSS_SNOC_AXI_CLK>, + <&rpmhcc RPMH_PKA_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "offline", "snoc_axi", "pka", "xo"; + + power-domains = <&rpmhpd SC7280_CX>, + <&rpmhpd SC7280_MSS>; + power-domain-names = "cx", "mss"; + + memory-region = <&mpss_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&modem_smp2p_out 0>; + qcom,smem-state-names = "stop"; + + resets = <&aoss_reset AOSS_CC_MSS_RESTART>, + <&pdc_reset PDC_MODEM_SYNC_RESET>; + reset-names = "mss_restart", "pdc_reset"; + + qcom,halt-regs = <&tcsr_mutex 0x23000 0x25000 0x28000 0x33000>; + qcom,ext-regs = <&tcsr 0x10000 0x10004 &tcsr_mutex 0x26004 0x26008>; + qcom,qaccept-regs = <&tcsr_mutex 0x23030 0x23040 0x23020>; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "modem"; + qcom,remote-pid = <1>; + }; + }; + stm@6002000 { compatible = "arm,coresight-stm", "arm,primecell"; reg = <0 0x06002000 0 0x1000>, @@ -1258,15 +2409,11 @@ dp_phy: dp-phy@88ea200 { reg = <0 0x088ea200 0 0x200>, <0 0x088ea400 0 0x200>, - <0 0x088eac00 0 0x400>, + <0 0x088eaa00 0 0x200>, <0 0x088ea600 0 0x200>, - <0 0x088ea800 0 0x200>, - <0 0x088eaa00 0 0x100>; + <0 0x088ea800 0 0x200>; #phy-cells = <0>; #clock-cells = <1>; - clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; - clock-names = "pipe0"; - clock-output-names = "usb3_phy_pipe_clk_src"; }; }; @@ -1318,6 +2465,23 @@ }; }; + qspi: spi@88dc000 { + compatible = "qcom,sc7280-qspi", "qcom,qspi-v1"; + reg = <0 0x088dc000 0 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&gcc GCC_QSPI_CNOC_PERIPH_AHB_CLK>, + <&gcc GCC_QSPI_CORE_CLK>; + clock-names = "iface", "core"; + interconnects = <&gem_noc MASTER_APPSS_PROC 0 + &cnoc2 SLAVE_QSPI_0 0>; + interconnect-names = "qspi-config"; + power-domains = <&rpmhpd SC7280_CX>; + operating-points-v2 = <&qspi_opp_table>; + status = "disabled"; + }; + dc_noc: interconnect@90e0000 { reg = <0 0x090e0000 0 0x5080>; compatible = "qcom,sc7280-dc-noc"; @@ -1481,7 +2645,6 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; }; spmi_bus: spmi@c440000 { @@ -1513,11 +2676,511 @@ gpio-ranges = <&tlmm 0 0 175>; wakeup-parent = <&pdc>; - qup_uart5_default: qup-uart5-default { - pins = "gpio46", "gpio47"; + qspi_clk: qspi-clk { + pins = "gpio14"; + function = "qspi_clk"; + }; + + qspi_cs0: qspi-cs0 { + pins = "gpio15"; + function = "qspi_cs"; + }; + + qspi_cs1: qspi-cs1 { + pins = "gpio19"; + function = "qspi_cs"; + }; + + qspi_data01: qspi-data01 { + pins = "gpio12", "gpio13"; + function = "qspi_data"; + }; + + qspi_data12: qspi-data12 { + pins = "gpio16", "gpio17"; + function = "qspi_data"; + }; + + qup_i2c0_data_clk: qup-i2c0-data-clk { + pins = "gpio0", "gpio1"; + function = "qup00"; + }; + + qup_i2c1_data_clk: qup-i2c1-data-clk { + pins = "gpio4", "gpio5"; + function = "qup01"; + }; + + qup_i2c2_data_clk: qup-i2c2-data-clk { + pins = "gpio8", "gpio9"; + function = "qup02"; + }; + + qup_i2c3_data_clk: qup-i2c3-data-clk { + pins = "gpio12", "gpio13"; + function = "qup03"; + }; + + qup_i2c4_data_clk: qup-i2c4-data-clk { + pins = "gpio16", "gpio17"; + function = "qup04"; + }; + + qup_i2c5_data_clk: qup-i2c5-data-clk { + pins = "gpio20", "gpio21"; + function = "qup05"; + }; + + qup_i2c6_data_clk: qup-i2c6-data-clk { + pins = "gpio24", "gpio25"; + function = "qup06"; + }; + + qup_i2c7_data_clk: qup-i2c7-data-clk { + pins = "gpio28", "gpio29"; + function = "qup07"; + }; + + qup_i2c8_data_clk: qup-i2c8-data-clk { + pins = "gpio32", "gpio33"; + function = "qup10"; + }; + + qup_i2c9_data_clk: qup-i2c9-data-clk { + pins = "gpio36", "gpio37"; + function = "qup11"; + }; + + qup_i2c10_data_clk: qup-i2c10-data-clk { + pins = "gpio40", "gpio41"; + function = "qup12"; + }; + + qup_i2c11_data_clk: qup-i2c11-data-clk { + pins = "gpio44", "gpio45"; function = "qup13"; }; + qup_i2c12_data_clk: qup-i2c12-data-clk { + pins = "gpio48", "gpio49"; + function = "qup14"; + }; + + qup_i2c13_data_clk: qup-i2c13-data-clk { + pins = "gpio52", "gpio53"; + function = "qup15"; + }; + + qup_i2c14_data_clk: qup-i2c14-data-clk { + pins = "gpio56", "gpio57"; + function = "qup16"; + }; + + qup_i2c15_data_clk: qup-i2c15-data-clk { + pins = "gpio60", "gpio61"; + function = "qup17"; + }; + + qup_spi0_data_clk: qup-spi0-data-clk { + pins = "gpio0", "gpio1", "gpio2"; + function = "qup00"; + }; + + qup_spi0_cs: qup-spi0-cs { + pins = "gpio3"; + function = "qup00"; + }; + + qup_spi0_cs_gpio: qup-spi0-cs-gpio { + pins = "gpio3"; + function = "gpio"; + }; + + qup_spi1_data_clk: qup-spi1-data-clk { + pins = "gpio4", "gpio5", "gpio6"; + function = "qup01"; + }; + + qup_spi1_cs: qup-spi1-cs { + pins = "gpio7"; + function = "qup01"; + }; + + qup_spi1_cs_gpio: qup-spi1-cs-gpio { + pins = "gpio7"; + function = "gpio"; + }; + + qup_spi2_data_clk: qup-spi2-data-clk { + pins = "gpio8", "gpio9", "gpio10"; + function = "qup02"; + }; + + qup_spi2_cs: qup-spi2-cs { + pins = "gpio11"; + function = "qup02"; + }; + + qup_spi2_cs_gpio: qup-spi2-cs-gpio { + pins = "gpio11"; + function = "gpio"; + }; + + qup_spi3_data_clk: qup-spi3-data-clk { + pins = "gpio12", "gpio13", "gpio14"; + function = "qup03"; + }; + + qup_spi3_cs: qup-spi3-cs { + pins = "gpio15"; + function = "qup03"; + }; + + qup_spi3_cs_gpio: qup-spi3-cs-gpio { + pins = "gpio15"; + function = "gpio"; + }; + + qup_spi4_data_clk: qup-spi4-data-clk { + pins = "gpio16", "gpio17", "gpio18"; + function = "qup04"; + }; + + qup_spi4_cs: qup-spi4-cs { + pins = "gpio19"; + function = "qup04"; + }; + + qup_spi4_cs_gpio: qup-spi4-cs-gpio { + pins = "gpio19"; + function = "gpio"; + }; + + qup_spi5_data_clk: qup-spi5-data-clk { + pins = "gpio20", "gpio21", "gpio22"; + function = "qup05"; + }; + + qup_spi5_cs: qup-spi5-cs { + pins = "gpio23"; + function = "qup05"; + }; + + qup_spi5_cs_gpio: qup-spi5-cs-gpio { + pins = "gpio23"; + function = "gpio"; + }; + + qup_spi6_data_clk: qup-spi6-data-clk { + pins = "gpio24", "gpio25", "gpio26"; + function = "qup06"; + }; + + qup_spi6_cs: qup-spi6-cs { + pins = "gpio27"; + function = "qup06"; + }; + + qup_spi6_cs_gpio: qup-spi6-cs-gpio { + pins = "gpio27"; + function = "gpio"; + }; + + qup_spi7_data_clk: qup-spi7-data-clk { + pins = "gpio28", "gpio29", "gpio30"; + function = "qup07"; + }; + + qup_spi7_cs: qup-spi7-cs { + pins = "gpio31"; + function = "qup07"; + }; + + qup_spi7_cs_gpio: qup-spi7-cs-gpio { + pins = "gpio31"; + function = "gpio"; + }; + + qup_spi8_data_clk: qup-spi8-data-clk { + pins = "gpio32", "gpio33", "gpio34"; + function = "qup10"; + }; + + qup_spi8_cs: qup-spi8-cs { + pins = "gpio35"; + function = "qup10"; + }; + + qup_spi8_cs_gpio: qup-spi8-cs-gpio { + pins = "gpio35"; + function = "gpio"; + }; + + qup_spi9_data_clk: qup-spi9-data-clk { + pins = "gpio36", "gpio37", "gpio38"; + function = "qup11"; + }; + + qup_spi9_cs: qup-spi9-cs { + pins = "gpio39"; + function = "qup11"; + }; + + qup_spi9_cs_gpio: qup-spi9-cs-gpio { + pins = "gpio39"; + function = "gpio"; + }; + + qup_spi10_data_clk: qup-spi10-data-clk { + pins = "gpio40", "gpio41", "gpio42"; + function = "qup12"; + }; + + qup_spi10_cs: qup-spi10-cs { + pins = "gpio43"; + function = "qup12"; + }; + + qup_spi10_cs_gpio: qup-spi10-cs-gpio { + pins = "gpio43"; + function = "gpio"; + }; + + qup_spi11_data_clk: qup-spi11-data-clk { + pins = "gpio44", "gpio45", "gpio46"; + function = "qup13"; + }; + + qup_spi11_cs: qup-spi11-cs { + pins = "gpio47"; + function = "qup13"; + }; + + qup_spi11_cs_gpio: qup-spi11-cs-gpio { + pins = "gpio47"; + function = "gpio"; + }; + + qup_spi12_data_clk: qup-spi12-data-clk { + pins = "gpio48", "gpio49", "gpio50"; + function = "qup14"; + }; + + qup_spi12_cs: qup-spi12-cs { + pins = "gpio51"; + function = "qup14"; + }; + + qup_spi12_cs_gpio: qup-spi12-cs-gpio { + pins = "gpio51"; + function = "gpio"; + }; + + qup_spi13_data_clk: qup-spi13-data-clk { + pins = "gpio52", "gpio53", "gpio54"; + function = "qup15"; + }; + + qup_spi13_cs: qup-spi13-cs { + pins = "gpio55"; + function = "qup15"; + }; + + qup_spi13_cs_gpio: qup-spi13-cs-gpio { + pins = "gpio55"; + function = "gpio"; + }; + + qup_spi14_data_clk: qup-spi14-data-clk { + pins = "gpio56", "gpio57", "gpio58"; + function = "qup16"; + }; + + qup_spi14_cs: qup-spi14-cs { + pins = "gpio59"; + function = "qup16"; + }; + + qup_spi14_cs_gpio: qup-spi14-cs-gpio { + pins = "gpio59"; + function = "gpio"; + }; + + qup_spi15_data_clk: qup-spi15-data-clk { + pins = "gpio60", "gpio61", "gpio62"; + function = "qup17"; + }; + + qup_spi15_cs: qup-spi15-cs { + pins = "gpio63"; + function = "qup17"; + }; + + qup_spi15_cs_gpio: qup-spi15-cs-gpio { + pins = "gpio63"; + function = "gpio"; + }; + + qup_uart0_cts: qup-uart0-cts { + pins = "gpio0"; + function = "qup00"; + }; + + qup_uart0_rts: qup-uart0-rts { + pins = "gpio1"; + function = "qup00"; + }; + + qup_uart0_tx: qup-uart0-tx { + pins = "gpio2"; + function = "qup00"; + }; + + qup_uart0_rx: qup-uart0-rx { + pins = "gpio3"; + function = "qup00"; + }; + + qup_uart1_cts: qup-uart1-cts { + pins = "gpio4"; + function = "qup01"; + }; + + qup_uart1_rts: qup-uart1-rts { + pins = "gpio5"; + function = "qup01"; + }; + + qup_uart1_tx: qup-uart1-tx { + pins = "gpio6"; + function = "qup01"; + }; + + qup_uart1_rx: qup-uart1-rx { + pins = "gpio7"; + function = "qup01"; + }; + + qup_uart2_cts: qup-uart2-cts { + pins = "gpio8"; + function = "qup02"; + }; + + qup_uart2_rts: qup-uart2-rts { + pins = "gpio9"; + function = "qup02"; + }; + + qup_uart2_tx: qup-uart2-tx { + pins = "gpio10"; + function = "qup02"; + }; + + qup_uart2_rx: qup-uart2-rx { + pins = "gpio11"; + function = "qup02"; + }; + + qup_uart3_cts: qup-uart3-cts { + pins = "gpio12"; + function = "qup03"; + }; + + qup_uart3_rts: qup-uart3-rts { + pins = "gpio13"; + function = "qup03"; + }; + + qup_uart3_tx: qup-uart3-tx { + pins = "gpio14"; + function = "qup03"; + }; + + qup_uart3_rx: qup-uart3-rx { + pins = "gpio15"; + function = "qup03"; + }; + + qup_uart4_cts: qup-uart4-cts { + pins = "gpio16"; + function = "qup04"; + }; + + qup_uart4_rts: qup-uart4-rts { + pins = "gpio17"; + function = "qup04"; + }; + + qup_uart4_tx: qup-uart4-tx { + pins = "gpio18"; + function = "qup04"; + }; + + qup_uart4_rx: qup-uart4-rx { + pins = "gpio19"; + function = "qup04"; + }; + + qup_uart5_cts: qup-uart5-cts { + pins = "gpio20"; + function = "qup05"; + }; + + qup_uart5_rts: qup-uart5-rts { + pins = "gpio21"; + function = "qup05"; + }; + + qup_uart5_tx: qup-uart5-tx { + pins = "gpio22"; + function = "qup05"; + }; + + qup_uart5_rx: qup-uart5-rx { + pins = "gpio23"; + function = "qup05"; + }; + + qup_uart6_cts: qup-uart6-cts { + pins = "gpio24"; + function = "qup06"; + }; + + qup_uart6_rts: qup-uart6-rts { + pins = "gpio25"; + function = "qup06"; + }; + + qup_uart6_tx: qup-uart6-tx { + pins = "gpio26"; + function = "qup06"; + }; + + qup_uart6_rx: qup-uart6-rx { + pins = "gpio27"; + function = "qup06"; + }; + + qup_uart7_cts: qup-uart7-cts { + pins = "gpio28"; + function = "qup07"; + }; + + qup_uart7_rts: qup-uart7-rts { + pins = "gpio29"; + function = "qup07"; + }; + + qup_uart7_tx: qup-uart7-tx { + pins = "gpio30"; + function = "qup07"; + }; + + qup_uart7_rx: qup-uart7-rx { + pins = "gpio31"; + function = "qup07"; + }; + sdc1_on: sdc1-on { clk { pins = "sdc1_clk"; @@ -1573,10 +3236,6 @@ data { pins = "sdc2_data"; }; - - sd-cd { - pins = "gpio91"; - }; }; sdc2_off: sdc2-off { @@ -1598,6 +3257,181 @@ bias-bus-hold; }; }; + + qup_uart8_cts: qup-uart8-cts { + pins = "gpio32"; + function = "qup10"; + }; + + qup_uart8_rts: qup-uart8-rts { + pins = "gpio33"; + function = "qup10"; + }; + + qup_uart8_tx: qup-uart8-tx { + pins = "gpio34"; + function = "qup10"; + }; + + qup_uart8_rx: qup-uart8-rx { + pins = "gpio35"; + function = "qup10"; + }; + + qup_uart9_cts: qup-uart9-cts { + pins = "gpio36"; + function = "qup11"; + }; + + qup_uart9_rts: qup-uart9-rts { + pins = "gpio37"; + function = "qup11"; + }; + + qup_uart9_tx: qup-uart9-tx { + pins = "gpio38"; + function = "qup11"; + }; + + qup_uart9_rx: qup-uart9-rx { + pins = "gpio39"; + function = "qup11"; + }; + + qup_uart10_cts: qup-uart10-cts { + pins = "gpio40"; + function = "qup12"; + }; + + qup_uart10_rts: qup-uart10-rts { + pins = "gpio41"; + function = "qup12"; + }; + + qup_uart10_tx: qup-uart10-tx { + pins = "gpio42"; + function = "qup12"; + }; + + qup_uart10_rx: qup-uart10-rx { + pins = "gpio43"; + function = "qup12"; + }; + + qup_uart11_cts: qup-uart11-cts { + pins = "gpio44"; + function = "qup13"; + }; + + qup_uart11_rts: qup-uart11-rts { + pins = "gpio45"; + function = "qup13"; + }; + + qup_uart11_tx: qup-uart11-tx { + pins = "gpio46"; + function = "qup13"; + }; + + qup_uart11_rx: qup-uart11-rx { + pins = "gpio47"; + function = "qup13"; + }; + + qup_uart12_cts: qup-uart12-cts { + pins = "gpio48"; + function = "qup14"; + }; + + qup_uart12_rts: qup-uart12-rts { + pins = "gpio49"; + function = "qup14"; + }; + + qup_uart12_tx: qup-uart12-tx { + pins = "gpio50"; + function = "qup14"; + }; + + qup_uart12_rx: qup-uart12-rx { + pins = "gpio51"; + function = "qup14"; + }; + + qup_uart13_cts: qup-uart13-cts { + pins = "gpio52"; + function = "qup15"; + }; + + qup_uart13_rts: qup-uart13-rts { + pins = "gpio53"; + function = "qup15"; + }; + + qup_uart13_tx: qup-uart13-tx { + pins = "gpio54"; + function = "qup15"; + }; + + qup_uart13_rx: qup-uart13-rx { + pins = "gpio55"; + function = "qup15"; + }; + + qup_uart14_cts: qup-uart14-cts { + pins = "gpio56"; + function = "qup16"; + }; + + qup_uart14_rts: qup-uart14-rts { + pins = "gpio57"; + function = "qup16"; + }; + + qup_uart14_tx: qup-uart14-tx { + pins = "gpio58"; + function = "qup16"; + }; + + qup_uart14_rx: qup-uart14-rx { + pins = "gpio59"; + function = "qup16"; + }; + + qup_uart15_cts: qup-uart15-cts { + pins = "gpio60"; + function = "qup17"; + }; + + qup_uart15_rts: qup-uart15-rts { + pins = "gpio61"; + function = "qup17"; + }; + + qup_uart15_tx: qup-uart15-tx { + pins = "gpio62"; + function = "qup17"; + }; + + qup_uart15_rx: qup-uart15-rx { + pins = "gpio63"; + function = "qup17"; + }; + }; + + imem@146a5000 { + compatible = "qcom,sc7280-imem", "syscon"; + reg = <0 0x146a5000 0 0x6000>; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0 0 0x146a5000 0x6000>; + + pil-reloc@594c { + compatible = "qcom,pil-reloc-info"; + reg = <0x594c 0xc8>; + }; }; apps_smmu: iommu@15000000 { @@ -2471,16 +4305,16 @@ }; gpuss0-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 1>; trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss0_crit: gpuss0-crit { @@ -2489,19 +4323,26 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss0_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; gpuss1-thermal { - polling-delay-passive = <0>; + polling-delay-passive = <100>; polling-delay = <0>; thermal-sensors = <&tsens1 2>; trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <95000>; hysteresis = <2000>; - type = "hot"; + type = "passive"; }; gpuss1_crit: gpuss1-crit { @@ -2510,6 +4351,13 @@ type = "critical"; }; }; + + cooling-maps { + map0 { + trip = <&gpuss1_alert0>; + cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; }; nspss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi index 849900e8b80e..11d0a8c1cf35 100644 --- a/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm630-sony-xperia-nile.dtsi @@ -308,7 +308,7 @@ regulator-allow-set-load; }; - vreg_l4b_29p5: l4 { + vreg_l4b_2p95: l4 { regulator-min-microvolt = <2944000>; regulator-max-microvolt = <2952000>; regulator-enable-ramp-delay = <250>; @@ -327,7 +327,7 @@ * Tighten the range to 1.8-3.328 (closest to 3.3) to * make the mmc driver happy. */ - vreg_l5b_29p5: l5 { + vreg_l5b_2p95: l5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3328000>; regulator-enable-ramp-delay = <250>; @@ -559,14 +559,14 @@ mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; - vmmc-supply = <&vreg_l4b_29p5>; + vmmc-supply = <&vreg_l4b_2p95>; vqmmc-supply = <&vreg_l8a_1p8>; }; &sdhc_2 { status = "okay"; - vmmc-supply = <&vreg_l5b_29p5>; + vmmc-supply = <&vreg_l5b_2p95>; vqmmc-supply = <&vreg_l2b_2p95>; }; diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 6d7172e6f4c3..35736b372e53 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -763,6 +763,8 @@ memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -862,6 +864,8 @@ memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2307,15 +2311,15 @@ }; }; - cryptobam: dma@1dc4000 { + cryptobam: dma-controller@1dc4000 { compatible = "qcom,bam-v1.7.0"; reg = <0 0x01dc4000 0 0x24000>; interrupts = ; - clocks = <&rpmhcc 15>; + clocks = <&rpmhcc RPMH_CE_CLK>; clock-names = "bam_clk"; #dma-cells = <1>; qcom,ee = <0>; - qcom,controlled-remotely = <1>; + qcom,controlled-remotely; iommus = <&apps_smmu 0x704 0x1>, <&apps_smmu 0x706 0x1>, <&apps_smmu 0x714 0x1>, @@ -2327,7 +2331,7 @@ reg = <0 0x01dfa000 0 0x6000>; clocks = <&gcc GCC_CE1_AHB_CLK>, <&gcc GCC_CE1_AHB_CLK>, - <&rpmhcc 15>; + <&rpmhcc RPMH_CE_CLK>; clock-names = "iface", "bus", "core"; dmas = <&cryptobam 6>, <&cryptobam 7>; dma-names = "rx", "tx"; @@ -2979,6 +2983,8 @@ clock-names = "iface", "bus", "mem", "gpll0_mss", "snoc_axi", "mnoc_axi", "prng", "xo"; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2988,11 +2994,10 @@ qcom,halt-regs = <&tcsr_mutex_regs 0x23000 0x25000 0x24000>; - power-domains = <&aoss_qmp 2>, - <&rpmhpd SDM845_CX>, + power-domains = <&rpmhpd SDM845_CX>, <&rpmhpd SDM845_MX>, <&rpmhpd SDM845_MSS>; - power-domain-names = "load_state", "cx", "mx", "mss"; + power-domain-names = "cx", "mx", "mss"; mba { memory-region = <&mba_region>; @@ -3641,6 +3646,30 @@ }; }; + lmh_cluster1: lmh@17d70800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d70800 0 0x400>; + interrupts = ; + cpus = <&CPU4>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + lmh_cluster0: lmh@17d78800 { + compatible = "qcom,sdm845-lmh"; + reg = <0 0x17d78800 0 0x400>; + interrupts = ; + cpus = <&CPU0>; + qcom,lmh-temp-arm-millicelsius = <65000>; + qcom,lmh-temp-low-millicelsius = <94500>; + qcom,lmh-temp-high-millicelsius = <95000>; + interrupt-controller; + #interrupt-cells = <1>; + }; + sound: sound { }; @@ -4583,7 +4612,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; cx_cdev: cx { #cooling-cells = <2>; @@ -4912,6 +4940,8 @@ reg = <0 0x17d43000 0 0x1400>, <0 0x17d45800 0 0x1400>; reg-names = "freq-domain0", "freq-domain1"; + interrupts-extended = <&lmh_cluster0 0>, <&lmh_cluster1 0>; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; clock-names = "xo", "alternate"; @@ -4969,23 +4999,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu0_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu0_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu1-thermal { @@ -5013,23 +5026,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu1_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu1_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu2-thermal { @@ -5057,23 +5053,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu2_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu2_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu3-thermal { @@ -5101,23 +5080,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu3_alert0>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu3_alert1>; - cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu4-thermal { @@ -5145,23 +5107,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu4_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu4_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu5-thermal { @@ -5189,23 +5134,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu5_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu5_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu6-thermal { @@ -5233,23 +5161,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu6_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu6_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; cpu7-thermal { @@ -5277,23 +5188,6 @@ type = "critical"; }; }; - - cooling-maps { - map0 { - trip = <&cpu7_alert0>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu7_alert1>; - cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, - <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; - }; - }; }; aoss0-thermal { diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts index 385e5029437d..cb11b963d68a 100644 --- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts +++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts @@ -230,6 +230,9 @@ }; vreg_l23a_3p3: ldo23 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3312000>; + regulator-initial-mode = ; }; vdda_qusb_hs0_3p1: @@ -615,6 +618,7 @@ vddxo-supply = <&vreg_l7a_1p8>; vddrf-supply = <&vreg_l17a_1p3>; vddch0-supply = <&vreg_l25a_3p3>; + vddch1-supply = <&vreg_l23a_3p3>; max-speed = <3200000>; }; }; @@ -729,6 +733,7 @@ vdd-1.8-xo-supply = <&vreg_l7a_1p8>; vdd-1.3-rfa-supply = <&vreg_l17a_1p3>; vdd-3.3-ch0-supply = <&vreg_l25a_3p3>; + vdd-3.3-ch1-supply = <&vreg_l23a_3p3>; qcom,snoc-host-cap-8bit-quirk; }; diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi index 2b37ce6a9f9c..c2317dd29896 100644 --- a/arch/arm64/boot/dts/qcom/sm6125.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi @@ -326,8 +326,8 @@ tlmm: pinctrl@500000 { compatible = "qcom,sm6125-tlmm"; reg = <0x00500000 0x400000>, - <0x00900000 0x400000>, - <0x00d00000 0x400000>; + <0x00900000 0x400000>, + <0x00d00000 0x400000>; reg-names = "west", "south", "east"; interrupts = ; gpio-controller; @@ -391,12 +391,12 @@ reg-names = "hc", "core"; interrupts = , - ; + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC1_AHB_CLK>, - <&gcc GCC_SDCC1_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC1_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; bus-width = <8>; non-removable; @@ -409,12 +409,12 @@ reg-names = "hc"; interrupts = , - ; + ; interrupt-names = "hc_irq", "pwr_irq"; clocks = <&gcc GCC_SDCC2_AHB_CLK>, - <&gcc GCC_SDCC2_APPS_CLK>, - <&xo_board>; + <&gcc GCC_SDCC2_APPS_CLK>, + <&xo_board>; clock-names = "iface", "core", "xo"; pinctrl-0 = <&sdc2_state_on>; @@ -433,11 +433,11 @@ ranges; clocks = <&gcc GCC_USB30_PRIM_MASTER_CLK>, - <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, - <&gcc GCC_USB3_PRIM_CLKREF_CLK>, - <&gcc GCC_USB30_PRIM_SLEEP_CLK>, - <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; + <&gcc GCC_SYS_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB3_PRIM_CLKREF_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>; assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, <&gcc GCC_USB30_PRIM_MASTER_CLK>; @@ -462,11 +462,11 @@ spmi_bus: spmi@1c40000 { compatible = "qcom,spmi-pmic-arb"; - reg = <0x01c40000 0x1100>, - <0x01e00000 0x2000000>, - <0x03e00000 0x100000>, - <0x03f00000 0xa0000>, - <0x01c0a000 0x26000>; + reg = <0x01c40000 0x1100>, + <0x01e00000 0x2000000>, + <0x03e00000 0x100000>, + <0x03f00000 0xa0000>, + <0x01c0a000 0x26000>; reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; interrupt-names = "periph_irq"; interrupts = ; @@ -494,22 +494,22 @@ reg = <0x0f120000 0x1000>; clock-frequency = <19200000>; - frame@0f121000 { + frame@f121000 { frame-number = <0>; interrupts = , - ; + ; reg = <0x0f121000 0x1000>, <0x0f122000 0x1000>; }; - frame@0f123000 { + frame@f123000 { frame-number = <1>; interrupts = ; reg = <0x0f123000 0x1000>; status = "disabled"; }; - frame@0f124000 { + frame@f124000 { frame-number = <2>; interrupts = ; reg = <0x0f124000 0x1000>; @@ -548,7 +548,7 @@ intc: interrupt-controller@f200000 { compatible = "arm,gic-v3"; reg = <0x0f200000 0x20000>, - <0x0f300000 0x100000>; + <0x0f300000 0x100000>; #interrupt-cells = <3>; interrupt-controller; interrupts = ; @@ -558,9 +558,9 @@ timer { compatible = "arm,armv8-timer"; interrupts = ; + GIC_PPI 2 0xf08 + GIC_PPI 3 0xf08 + GIC_PPI 0 0xf08>; clock-frequency = <19200000>; }; }; diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts new file mode 100644 index 000000000000..a26c23754f5d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts @@ -0,0 +1,57 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ +/dts-v1/; + +#include "sm6350.dtsi" + +/ { + model = "Sony Xperia 10 III"; + compatible = "sony,pdx213", "qcom,sm6350"; + qcom,msm-id = <434 0x10000>, <459 0x10000>; + qcom,board-id = <0x1000B 0>; + + chosen { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + framebuffer: framebuffer@a0000000 { + compatible = "simple-framebuffer"; + reg = <0 0xa0000000 0 0x2300000>; + width = <1080>; + height = <2520>; + stride = <(1080 * 4)>; + format = "a8r8g8b8"; + clocks = <&gcc GCC_DISP_AXI_CLK>; + }; + }; +}; + +&sdhc_2 { + status = "okay"; + + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>; +}; + +&tlmm { + gpio-reserved-ranges = <13 4>, <45 2>, <56 2>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + maximum-speed = "super-speed"; + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; +}; + +&usb_1_qmpphy { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi new file mode 100644 index 000000000000..926d30c57add --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -0,0 +1,934 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, Konrad Dybcio + */ + +#include +#include +#include +#include +#include +#include +#include + +/ { + interrupt-parent = <&intc>; + #address-cells = <2>; + #size-cells = <2>; + + clocks { + xo_board: xo-board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <76800000>; + clock-output-names = "xo_board"; + }; + + sleep_clk: sleep-clk { + compatible = "fixed-clock"; + clock-frequency = <32764>; + #clock-cells = <0>; + }; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + CPU0: cpu@0 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x0>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_0>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_0: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + L3_0: l3-cache { + compatible = "cache"; + }; + }; + }; + + CPU1: cpu@100 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x100>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_100>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_100: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU2: cpu@200 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x200>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_200>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_200: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU3: cpu@300 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x300>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_300>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_300: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU4: cpu@400 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x400>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_400>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_400: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU5: cpu@500 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x500>; + enable-method = "psci"; + capacity-dmips-mhz = <1024>; + dynamic-power-coefficient = <100>; + next-level-cache = <&L2_500>; + qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; + L2_500: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + + }; + + CPU6: cpu@600 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x600>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_600>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_600: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + CPU7: cpu@700 { + device_type = "cpu"; + compatible = "qcom,kryo560"; + reg = <0x0 0x700>; + enable-method = "psci"; + capacity-dmips-mhz = <1894>; + dynamic-power-coefficient = <703>; + next-level-cache = <&L2_700>; + qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; + L2_700: l2-cache { + compatible = "cache"; + next-level-cache = <&L3_0>; + }; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + + core4 { + cpu = <&CPU4>; + }; + + core5 { + cpu = <&CPU5>; + }; + + core6 { + cpu = <&CPU6>; + }; + + core7 { + cpu = <&CPU7>; + }; + }; + }; + }; + + firmware { + scm: scm { + compatible = "qcom,scm-sm6350", "qcom,scm"; + #reset-cells = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* We expect the bootloader to fill in the size */ + reg = <0x0 0x80000000 0x0 0x0>; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = ; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + reserved_memory: reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + hyp_mem: memory@80000000 { + reg = <0 0x80000000 0 0x600000>; + no-map; + }; + + xbl_aop_mem: memory@80700000 { + reg = <0 0x80700000 0 0x160000>; + no-map; + }; + + cmd_db: memory@80860000 { + compatible = "qcom,cmd-db"; + reg = <0 0x80860000 0 0x20000>; + no-map; + }; + + sec_apps_mem: memory@808ff000 { + reg = <0 0x808ff000 0 0x1000>; + no-map; + }; + + smem_mem: memory@80900000 { + reg = <0 0x80900000 0 0x200000>; + no-map; + }; + + cdsp_sec_mem: memory@80b00000 { + reg = <0 0x80b00000 0 0x1e00000>; + no-map; + }; + + pil_camera_mem: memory@86000000 { + reg = <0 0x86000000 0 0x500000>; + no-map; + }; + + pil_npu_mem: memory@86500000 { + reg = <0 0x86500000 0 0x500000>; + no-map; + }; + + pil_video_mem: memory@86a00000 { + reg = <0 0x86a00000 0 0x500000>; + no-map; + }; + + pil_cdsp_mem: memory@86f00000 { + reg = <0 0x86f00000 0 0x1e00000>; + no-map; + }; + + pil_adsp_mem: memory@88d00000 { + reg = <0 0x88d00000 0 0x2800000>; + no-map; + }; + + wlan_fw_mem: memory@8b500000 { + reg = <0 0x8b500000 0 0x200000>; + no-map; + }; + + pil_ipa_fw_mem: memory@8b700000 { + reg = <0 0x8b700000 0 0x10000>; + no-map; + }; + + pil_ipa_gsi_mem: memory@8b710000 { + reg = <0 0x8b710000 0 0x5400>; + no-map; + }; + + pil_gpu_mem: memory@8b715400 { + reg = <0 0x8b715400 0 0x2000>; + no-map; + }; + + pil_modem_mem: memory@8b800000 { + reg = <0 0x8b800000 0 0xf800000>; + no-map; + }; + + cont_splash_memory: memory@a0000000 { + reg = <0 0xa0000000 0 0x2300000>; + no-map; + }; + + dfps_data_memory: memory@a2300000 { + reg = <0 0xa2300000 0 0x100000>; + no-map; + }; + + removed_region: memory@c0000000 { + reg = <0 0xc0000000 0 0x3900000>; + no-map; + }; + + debug_region: memory@ffb00000 { + reg = <0 0xffb00000 0 0xc0000>; + no-map; + }; + + last_log_region: memory@ffbc0000 { + reg = <0 0xffbc0000 0 0x40000>; + no-map; + }; + + ramoops: ramoops@ffc00000 { + compatible = "removed-dma-pool", "ramoops"; + reg = <0 0xffc00000 0 0x00100000>; + record-size = <0x1000>; + console-size = <0x40000>; + ftrace-size = <0x0>; + msg-size = <0x20000 0x20000>; + cc-size = <0x0>; + no-map; + }; + + cmdline_region: memory@ffd00000 { + reg = <0 0xffd00000 0 0x1000>; + no-map; + }; + }; + + smem { + compatible = "qcom,smem"; + memory-region = <&smem_mem>; + hwlocks = <&tcsr_mutex 3>; + }; + + soc: soc@0 { + #address-cells = <2>; + #size-cells = <2>; + ranges = <0 0 0 0 0x10 0>; + dma-ranges = <0 0 0 0 0x10 0>; + compatible = "simple-bus"; + + gcc: clock-controller@100000 { + compatible = "qcom,gcc-sm6350"; + reg = <0 0x00100000 0 0x1f0000>; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + }; + + ipcc: mailbox@408000 { + compatible = "qcom,sm6350-ipcc", "qcom,ipcc"; + reg = <0 0x00408000 0 0x1000>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + rng: rng@793000 { + compatible = "qcom,prng-ee"; + reg = <0 0x00793000 0 0x1000>; + clocks = <&gcc GCC_PRNG_AHB_CLK>; + clock-names = "core"; + }; + + sdhc_1: sdhci@7c4000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x007c4000 0 0x1000>, + <0 0x007c5000 0 0x1000>, + <0 0x007c8000 0 0x8000>; + reg-names = "hc", "cqhci", "ice"; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_AHB_CLK>, + <&gcc GCC_SDCC1_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc1_opp_table>; + bus-width = <8>; + non-removable; + supports-cqe; + + status = "disabled"; + + sdhc1_opp_table: sdhc1-opp-table { + compatible = "operating-points-v2"; + + opp-19200000 { + opp-hz = /bits/ 64 <19200000>; + required-opps = <&rpmhpd_opp_min_svs>; + }; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_low_svs>; + }; + + opp-384000000 { + opp-hz = /bits/ 64 <384000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + }; + }; + + tcsr_mutex: hwlock@1f40000 { + compatible = "qcom,tcsr-mutex"; + reg = <0x0 0x01f40000 0x0 0x40000>; + #hwlock-cells = <1>; + }; + + sdhc_2: sdhci@8804000 { + compatible = "qcom,sm6350-sdhci", "qcom,sdhci-msm-v5"; + reg = <0 0x08804000 0 0x1000>; + + interrupts = , + ; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC2_AHB_CLK>, + <&gcc GCC_SDCC2_APPS_CLK>, + <&rpmhcc RPMH_CXO_CLK>; + clock-names = "iface", "core", "xo"; + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + power-domains = <&rpmhpd 0>; + operating-points-v2 = <&sdhc2_opp_table>; + bus-width = <4>; + + status = "disabled"; + + sdhc2_opp_table: sdhc2-opp-table { + compatible = "operating-points-v2"; + + opp-100000000 { + opp-hz = /bits/ 64 <100000000>; + required-opps = <&rpmhpd_opp_svs_l1>; + }; + + opp-202000000 { + opp-hz = /bits/ 64 <202000000>; + required-opps = <&rpmhpd_opp_nom>; + }; + }; + }; + + usb_1_hsphy: phy@88e3000 { + compatible = "qcom,sm6350-qusb2-phy", "qcom,qusb2-v2-phy"; + reg = <0 0x088e3000 0 0x400>; + status = "disabled"; + #phy-cells = <0>; + + clocks = <&xo_board>, <&rpmhcc RPMH_CXO_CLK>; + clock-names = "cfg_ahb", "ref"; + + resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>; + }; + + usb_1_qmpphy: phy@88e9000 { + compatible = "qcom,sc7180-qmp-usb3-dp-phy"; + reg = <0 0x088e9000 0 0x200>, + <0 0x088e8000 0 0x40>, + <0 0x088ea000 0 0x200>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>, + <&rpmhcc RPMH_QLINK_CLK>, + <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>, + <&xo_board>; + clock-names = "aux", "ref", "com_aux", "cfg_ahb"; + + resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>, + <&gcc GCC_USB3_PHY_PRIM_BCR>; + reset-names = "phy", "common"; + + usb_1_ssphy: usb3-phy@88e9200 { + reg = <0 0x088e9200 0 0x200>, + <0 0x088e9400 0 0x200>, + <0 0x088e9c00 0 0x400>, + <0 0x088e9600 0 0x200>, + <0 0x088e9800 0 0x200>, + <0 0x088e9a00 0 0x100>; + #clock-cells = <0>; + #phy-cells = <0>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + + dp_phy: dp-phy@88ea200 { + reg = <0 0x088ea200 0 0x200>, + <0 0x088ea400 0 0x200>, + <0 0x088eac00 0 0x400>, + <0 0x088ea600 0 0x200>, + <0 0x088ea800 0 0x200>, + <0 0x088eaa00 0 0x100>; + #phy-cells = <0>; + #clock-cells = <1>; + clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; + clock-names = "pipe0"; + clock-output-names = "usb3_phy_pipe_clk_src"; + }; + }; + + system-cache-controller@9200000 { + compatible = "qcom,sm6350-llcc"; + reg = <0 0x09200000 0 0x50000>, <0 0x09600000 0 0x50000>; + reg-names = "llcc_base", "llcc_broadcast_base"; + }; + + usb_1: usb@a6f8800 { + compatible = "qcom,sm6350-dwc3", "qcom,dwc3"; + reg = <0 0x0a6f8800 0 0x400>; + status = "disabled"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MASTER_CLK>, + <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>, + <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>, + <&gcc GCC_USB30_PRIM_SLEEP_CLK>; + clock-names = "cfg_noc", "core", "iface", "mock_utmi", + "sleep"; + + interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 14 IRQ_TYPE_EDGE_BOTH>, + <&pdc 15 IRQ_TYPE_EDGE_BOTH>, + <&pdc 17 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hs_phy_irq", "dp_hs_phy_irq", + "dm_hs_phy_irq", "ss_phy_irq"; + + power-domains = <&gcc USB30_PRIM_GDSC>; + + resets = <&gcc GCC_USB30_PRIM_BCR>; + + usb_1_dwc3: usb@a600000 { + compatible = "snps,dwc3"; + reg = <0 0x0a600000 0 0xcd00>; + interrupts = ; + iommus = <&apps_smmu 0x540 0x0>; + snps,dis_u2_susphy_quirk; + snps,dis_enblslpm_quirk; + snps,has-lpm-erratum; + snps,hird-threshold = /bits/ 8 <0x10>; + phys = <&usb_1_hsphy>, <&usb_1_ssphy>; + phy-names = "usb2-phy", "usb3-phy"; + }; + }; + + pdc: interrupt-controller@b220000 { + compatible = "qcom,sm6350-pdc", "qcom,pdc"; + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x64>; + qcom,pdc-ranges = <0 480 94>, <94 609 31>, + <125 63 1>, <126 655 12>, <138 139 15>; + #interrupt-cells = <2>; + interrupt-parent = <&intc>; + interrupt-controller; + }; + + tsens0: thermal-sensor@c263000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c263000 0 0x1ff>, /* TM */ + <0 0x0c222000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c265000 { + compatible = "qcom,sm6350-tsens", "qcom,tsens-v2"; + reg = <0 0x0c265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <16>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + aoss_qmp: power-controller@c300000 { + compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp"; + reg = <0 0x0c300000 0 0x1000>; + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; + + #clock-cells = <0>; + #power-domain-cells = <1>; + }; + + spmi_bus: spmi@c440000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0 0xc440000 0 0x1100>, + <0 0xc600000 0 0x2000000>, + <0 0xe600000 0 0x100000>, + <0 0xe700000 0 0xa0000>, + <0 0xc40a000 0 0x26000>; + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + + tlmm: pinctrl@f100000 { + compatible = "qcom,sm6350-tlmm"; + reg = <0 0x0f100000 0 0x300000>; + interrupts = , + , + , + , + , + , + , + , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&tlmm 0 0 157>; + }; + + apps_smmu: iommu@15000000 { + compatible = "qcom,sm6350-smmu-500", "arm,mmu-500"; + reg = <0 0x15000000 0 0x100000>; + #iommu-cells = <2>; + #global-interrupts = <1>; + interrupts = , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + , + ; + }; + + intc: interrupt-controller@17a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */ + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */ + interrupts = ; + }; + + watchdog@17c10000 { + compatible = "qcom,apss-wdt-sm6350", "qcom,kpss-wdt"; + reg = <0 0x17c10000 0 0x1000>; + clocks = <&sleep_clk>; + interrupts = ; + }; + + timer@17c20000 { + compatible = "arm,armv7-timer-mem"; + reg = <0x0 0x17c20000 0x0 0x1000>; + clock-frequency = <19200000>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + frame@17c21000 { + frame-number = <0>; + interrupts = , + ; + reg = <0x0 0x17c21000 0x0 0x1000>, + <0x0 0x17c22000 0x0 0x1000>; + }; + + frame@17c23000 { + frame-number = <1>; + interrupts = ; + reg = <0x0 0x17c23000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c25000 { + frame-number = <2>; + interrupts = ; + reg = <0x0 0x17c25000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c27000 { + frame-number = <3>; + interrupts = ; + reg = <0x0 0x17c27000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c29000 { + frame-number = <4>; + interrupts = ; + reg = <0x0 0x17c29000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2b000 { + frame-number = <5>; + interrupts = ; + reg = <0x0 0x17c2b000 0x0 0x1000>; + status = "disabled"; + }; + + frame@17c2d000 { + frame-number = <6>; + interrupts = ; + reg = <0x0 0x17c2d000 0x0 0x1000>; + status = "disabled"; + }; + }; + + apps_rsc: rsc@18200000 { + compatible = "qcom,rpmh-rsc"; + label = "apps_rsc"; + reg = <0x0 0x18200000 0x0 0x10000>, + <0x0 0x18210000 0x0 0x10000>, + <0x0 0x18220000 0x0 0x10000>; + reg-names = "drv-0", "drv-1", "drv-2"; + interrupts = , + , + ; + qcom,tcs-offset = <0xd00>; + qcom,drv-id = <2>; + qcom,tcs-config = , , + , ; + + rpmhcc: clock-controller { + compatible = "qcom,sm6350-rpmh-clk"; + #clock-cells = <1>; + clock-names = "xo"; + clocks = <&xo_board>; + }; + + rpmhpd: power-controller { + compatible = "qcom,sm6350-rpmhpd"; + #power-domain-cells = <1>; + operating-points-v2 = <&rpmhpd_opp_table>; + + rpmhpd_opp_table: opp-table { + compatible = "operating-points-v2"; + + rpmhpd_opp_ret: opp1 { + opp-level = ; + }; + + rpmhpd_opp_min_svs: opp2 { + opp-level = ; + }; + + rpmhpd_opp_low_svs: opp3 { + opp-level = ; + }; + + rpmhpd_opp_svs: opp4 { + opp-level = ; + }; + + rpmhpd_opp_svs_l1: opp5 { + opp-level = ; + }; + + rpmhpd_opp_nom: opp6 { + opp-level = ; + }; + + rpmhpd_opp_nom_l1: opp7 { + opp-level = ; + }; + + rpmhpd_opp_nom_l2: opp8 { + opp-level = ; + }; + + rpmhpd_opp_turbo: opp9 { + opp-level = ; + }; + + rpmhpd_opp_turbo_l1: opp10 { + opp-level = ; + }; + }; + }; + + apps_bcm_voter: bcm_voter { + compatible = "qcom,bcm-voter"; + }; + }; + + cpufreq_hw: cpufreq@18323000 { + compatible = "qcom,cpufreq-hw"; + reg = <0 0x18323000 0 0x1000>, <0 0x18325800 0 0x1000>; + reg-names = "freq-domain0", "freq-domain1"; + clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>; + clock-names = "xo", "alternate"; + + #freq-domain-cells = <1>; + }; + }; + + timer { + compatible = "arm,armv8-timer"; + clock-frequency = <19200000>; + interrupts = , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index ef0232c2cf45..8a035693b7a3 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -6,7 +6,6 @@ #include #include -#include #include #include #include @@ -1729,13 +1728,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 3>, + power-domains = <&rpmhpd 3>, <&rpmhpd 2>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&slpi_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2319,13 +2319,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 7>, + power-domains = <&rpmhpd 7>, <&rpmhpd 0>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; memory-region = <&mpss_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&modem_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -2945,12 +2946,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&cdsp_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -3174,7 +3175,6 @@ mboxes = <&apss_shared 0>; #clock-cells = <0>; - #power-domain-cells = <1>; }; tsens0: thermal-sensor@c263000 { @@ -3321,12 +3321,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 7>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd 7>; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&adsp_smp2p_out 0>; qcom,smem-state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 8c15d9fed08f..2796b27f7c04 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -2088,13 +2087,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -2154,12 +2154,12 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd SM8250_CX>; - power-domain-names = "load_state", "cx"; + power-domains = <&rpmhpd SM8250_CX>; memory-region = <&cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -2907,7 +2907,6 @@ IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; }; spmi_bus: spmi@c440000 { @@ -3824,13 +3823,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd SM8250_LCX>, + power-domains = <&rpmhpd SM8250_LCX>, <&rpmhpd SM8250_LMX>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop"; diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index e91cd8a5e535..6c83cd52a279 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -726,15 +725,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_MODEM>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 12>; - power-domain-names = "load_state", "cx", "mss"; + power-domain-names = "cx", "mss"; interconnects = <&mc_virt MASTER_LLCC &mc_virt SLAVE_EBI1>; memory-region = <&pil_modem_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_modem_out 0>; qcom,smem-state-names = "stop"; @@ -794,7 +794,6 @@ mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>; #clock-cells = <0>; - #power-domain-cells = <1>; }; spmi_bus: spmi@c440000 { @@ -1107,13 +1106,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_SLPI>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_slpi_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_slpi_out 0>; qcom,smem-state-names = "stop"; @@ -1147,15 +1147,16 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_CDSP>, - <&rpmhpd 0>, + power-domains = <&rpmhpd 0>, <&rpmhpd 10>; - power-domain-names = "load_state", "cx", "mxc"; + power-domain-names = "cx", "mxc"; interconnects = <&compute_noc MASTER_CDSP_PROC &mc_virt SLAVE_EBI1>; memory-region = <&pil_cdsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_cdsp_out 0>; qcom,smem-state-names = "stop"; @@ -1381,13 +1382,14 @@ clocks = <&rpmhcc RPMH_CXO_CLK>; clock-names = "xo"; - power-domains = <&aoss_qmp AOSS_QMP_LS_LPASS>, - <&rpmhpd 4>, + power-domains = <&rpmhpd 4>, <&rpmhpd 5>; - power-domain-names = "load_state", "lcx", "lmx"; + power-domain-names = "lcx", "lmx"; memory-region = <&pil_adsp_mem>; + qcom,qmp = <&aoss_qmp>; + qcom,smem-states = <&smp2p_adsp_out 0>; qcom,smem-state-names = "stop";