From 3d2504663c41104b4359a15f35670cfa82de1bbf Mon Sep 17 00:00:00 2001 From: Jedrzej Jagielski Date: Tue, 14 Dec 2021 10:08:22 +0000 Subject: [PATCH 1/2] i40e: Fix reset bw limit when DCB enabled with 1 TC There was an AQ error I40E_AQ_RC_EINVAL when trying to reset bw limit as part of bw allocation setup. This was caused by trying to reset bw limit with DCB enabled. Bw limit should not be reset when DCB is enabled. The code was relying on the pf->flags to check if DCB is enabled but if only 1 TC is available this flag will not be set even though DCB is enabled. Add a check for number of TC and if it is 1 don't try to reset bw limit even if pf->flags shows DCB as disabled. Fixes: fa38e30ac73f ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled") Suggested-by: Alexander Lobakin # Flatten the condition Signed-off-by: Sylwester Dziedziuch Signed-off-by: Jedrzej Jagielski Reviewed-by: Alexander Lobakin Tested-by: Imam Hassan Reza Biswas Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e_main.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index f70c478dafdb..5cb4dc69fe87 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5372,7 +5372,15 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc, /* There is no need to reset BW when mqprio mode is on. */ if (pf->flags & I40E_FLAG_TC_MQPRIO) return 0; - if (!vsi->mqprio_qopt.qopt.hw && !(pf->flags & I40E_FLAG_DCB_ENABLED)) { + + if (!vsi->mqprio_qopt.qopt.hw) { + if (pf->flags & I40E_FLAG_DCB_ENABLED) + goto skip_reset; + + if (IS_ENABLED(CONFIG_I40E_DCB) && + i40e_dcb_hw_get_num_tc(&pf->hw) == 1) + goto skip_reset; + ret = i40e_set_bw_limit(vsi, vsi->seid, 0); if (ret) dev_info(&pf->pdev->dev, @@ -5380,6 +5388,8 @@ static int i40e_vsi_configure_bw_alloc(struct i40e_vsi *vsi, u8 enabled_tc, vsi->seid); return ret; } + +skip_reset: memset(&bw_data, 0, sizeof(bw_data)); bw_data.tc_valid_bits = enabled_tc; for (i = 0; i < I40E_MAX_TRAFFIC_CLASS; i++) From 6533e558c6505e94c3e0ed4281ed5e31ec985f4d Mon Sep 17 00:00:00 2001 From: Karen Sornek Date: Wed, 12 Jan 2022 10:19:47 +0100 Subject: [PATCH 2/2] i40e: Fix reset path while removing the driver Fix the crash in kernel while dereferencing the NULL pointer, when the driver is unloaded and simultaneously the VSI rings are being stopped. The hardware requires 50msec in order to finish RX queues disable. For this purpose the driver spins in mdelay function for the operation to be completed. For example changing number of queues which requires reset would fail in the following call stack: 1) i40e_prep_for_reset 2) i40e_pf_quiesce_all_vsi 3) i40e_quiesce_vsi 4) i40e_vsi_close 5) i40e_down 6) i40e_vsi_stop_rings 7) i40e_vsi_control_rx -> disable requires the delay of 50msecs 8) continue back in i40e_down function where i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash When the driver was spinning vsi_release called i40e_vsi_free_arrays where the vsi->tx_rings resources were freed and the pointer was set to NULL. Fixes: 5b6d4a7f20b0 ("i40e: Fix crash during removing i40e driver") Signed-off-by: Slawomir Laba Signed-off-by: Sylwester Dziedziuch Signed-off-by: Karen Sornek Tested-by: Gurucharan G Signed-off-by: Tony Nguyen --- drivers/net/ethernet/intel/i40e/i40e.h | 1 + drivers/net/ethernet/intel/i40e/i40e_main.c | 19 ++++++++++++++++++- 2 files changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h index 2e02cc68cd3f..80c5cecaf2b5 100644 --- a/drivers/net/ethernet/intel/i40e/i40e.h +++ b/drivers/net/ethernet/intel/i40e/i40e.h @@ -144,6 +144,7 @@ enum i40e_state_t { __I40E_VIRTCHNL_OP_PENDING, __I40E_RECOVERY_MODE, __I40E_VF_RESETS_DISABLED, /* disable resets during i40e_remove */ + __I40E_IN_REMOVE, __I40E_VFS_RELEASING, /* This must be last as it determines the size of the BITMAP */ __I40E_STATE_SIZE__, diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index 5cb4dc69fe87..0c4b7dfb3b35 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -10863,6 +10863,9 @@ static void i40e_reset_and_rebuild(struct i40e_pf *pf, bool reinit, bool lock_acquired) { int ret; + + if (test_bit(__I40E_IN_REMOVE, pf->state)) + return; /* Now we wait for GRST to settle out. * We don't have to delete the VEBs or VSIs from the hw switch * because the reset will make them disappear. @@ -12222,6 +12225,8 @@ int i40e_reconfig_rss_queues(struct i40e_pf *pf, int queue_count) vsi->req_queue_pairs = queue_count; i40e_prep_for_reset(pf); + if (test_bit(__I40E_IN_REMOVE, pf->state)) + return pf->alloc_rss_size; pf->alloc_rss_size = new_rss_size; @@ -13048,6 +13053,10 @@ static int i40e_xdp_setup(struct i40e_vsi *vsi, struct bpf_prog *prog, if (need_reset) i40e_prep_for_reset(pf); + /* VSI shall be deleted in a moment, just return EINVAL */ + if (test_bit(__I40E_IN_REMOVE, pf->state)) + return -EINVAL; + old_prog = xchg(&vsi->xdp_prog, prog); if (need_reset) { @@ -15938,8 +15947,13 @@ static void i40e_remove(struct pci_dev *pdev) i40e_write_rx_ctl(hw, I40E_PFQF_HENA(0), 0); i40e_write_rx_ctl(hw, I40E_PFQF_HENA(1), 0); - while (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) + /* Grab __I40E_RESET_RECOVERY_PENDING and set __I40E_IN_REMOVE + * flags, once they are set, i40e_rebuild should not be called as + * i40e_prep_for_reset always returns early. + */ + while (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING, pf->state)) usleep_range(1000, 2000); + set_bit(__I40E_IN_REMOVE, pf->state); if (pf->flags & I40E_FLAG_SRIOV_ENABLED) { set_bit(__I40E_VF_RESETS_DISABLED, pf->state); @@ -16138,6 +16152,9 @@ static void i40e_pci_error_reset_done(struct pci_dev *pdev) { struct i40e_pf *pf = pci_get_drvdata(pdev); + if (test_bit(__I40E_IN_REMOVE, pf->state)) + return; + i40e_reset_and_rebuild(pf, false, false); }