diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c
index e8307f0737f2..4224b4b3cae6 100644
--- a/sound/soc/codecs/tlv320aic31xx.c
+++ b/sound/soc/codecs/tlv320aic31xx.c
@@ -15,6 +15,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/init.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/pm.h>
 #include <linux/i2c.h>
@@ -169,6 +170,7 @@ struct aic31xx_priv {
 	struct regulator_bulk_data supplies[AIC31XX_NUM_SUPPLIES];
 	struct aic31xx_disable_nb disable_nb[AIC31XX_NUM_SUPPLIES];
 	struct snd_soc_jack *jack;
+	u32 sysclk_id;
 	unsigned int sysclk;
 	u8 p_div;
 	int rate_div_line;
@@ -962,6 +964,7 @@ static int aic31xx_hw_params(struct snd_pcm_substream *substream,
 			     struct snd_soc_dai *dai)
 {
 	struct snd_soc_component *component = dai->component;
+	struct aic31xx_priv *aic31xx = snd_soc_component_get_drvdata(component);
 	u8 data = 0;
 
 	dev_dbg(component->dev, "## %s: width %d rate %d\n",
@@ -993,6 +996,16 @@ static int aic31xx_hw_params(struct snd_pcm_substream *substream,
 			    AIC31XX_IFACE1_DATALEN_MASK,
 			    data);
 
+	/*
+	 * If BCLK is used as PLL input, the sysclk is determined by the hw
+	 * params. So it must be updated here to match the input frequency.
+	 */
+	if (aic31xx->sysclk_id == AIC31XX_PLL_CLKIN_BCLK) {
+		aic31xx->sysclk = params_rate(params) * params_width(params) *
+				  params_channels(params);
+		aic31xx->p_div = 1;
+	}
+
 	return aic31xx_setup_pll(component, params);
 }
 
@@ -1177,6 +1190,7 @@ static int aic31xx_set_dai_sysclk(struct snd_soc_dai *codec_dai,
 	snd_soc_component_update_bits(component, AIC31XX_CLKMUX, AIC31XX_PLL_CLKIN_MASK,
 			    clk_id << AIC31XX_PLL_CLKIN_SHIFT);
 
+	aic31xx->sysclk_id = clk_id;
 	aic31xx->sysclk = freq;
 
 	return 0;