diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h index ef193750e3c2..6386f6b2b891 100644 --- a/drivers/video/omap2/dss/dss.h +++ b/drivers/video/omap2/dss/dss.h @@ -515,13 +515,6 @@ void hdmi_panel_exit(void); int rfbi_init_platform_driver(void); void rfbi_uninit_platform_driver(void); void rfbi_dump_regs(struct seq_file *s); - -int rfbi_configure(int rfbi_module, int bpp, int lines); -void rfbi_enable_rfbi(bool enable); -void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width, - u16 height, void (callback)(void *data), void *data); -void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t); -unsigned long rfbi_get_max_tx_rate(void); int rfbi_init_display(struct omap_dss_device *display); #else static inline int rfbi_init_platform_driver(void) diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index 155caf02bcad..c06fbe0bc678 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -66,9 +66,6 @@ struct rfbi_reg { u16 idx; }; #define REG_FLD_MOD(idx, val, start, end) \ rfbi_write_reg(idx, FLD_MOD(rfbi_read_reg(idx), val, start, end)) -/* To work around an RFBI transfer rate limitation */ -#define OMAP_RFBI_RATE_LIMIT 1 - enum omap_rfbi_cycleformat { OMAP_DSS_RFBI_CYCLEFORMAT_1_1 = 0, OMAP_DSS_RFBI_CYCLEFORMAT_2_1 = 1, @@ -90,11 +87,6 @@ enum omap_rfbi_parallelmode { OMAP_DSS_RFBI_PARALLELMODE_16 = 3, }; -enum update_cmd { - RFBI_CMD_UPDATE = 0, - RFBI_CMD_SYNC = 1, -}; - static int rfbi_convert_timings(struct rfbi_timings *t); static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div); @@ -115,22 +107,9 @@ static struct { struct omap_dss_device *dssdev[2]; - struct kfifo cmd_fifo; - spinlock_t cmd_lock; - struct completion cmd_done; - atomic_t cmd_fifo_full; - atomic_t cmd_pending; - struct semaphore bus_lock; } rfbi; -struct update_region { - u16 x; - u16 y; - u16 w; - u16 h; -}; - static inline void rfbi_write_reg(const struct rfbi_reg idx, u32 val) { __raw_writel(val, rfbi.base + idx.idx); @@ -305,7 +284,7 @@ void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width, } EXPORT_SYMBOL(omap_rfbi_write_pixels); -void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width, +static void rfbi_transfer_area(struct omap_dss_device *dssdev, u16 width, u16 height, void (*callback)(void *data), void *data) { u32 l; @@ -345,8 +324,6 @@ static void framedone_callback(void *data, u32 mask) if (callback != NULL) callback(rfbi.framedone_callback_data); - - atomic_set(&rfbi.cmd_pending, 0); } #if 1 /* VERBOSE */ @@ -436,7 +413,7 @@ static int calc_extif_timings(struct rfbi_timings *t) } -void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) +static void rfbi_set_timings(int rfbi_module, struct rfbi_timings *t) { int r; @@ -471,59 +448,6 @@ static int ps_to_rfbi_ticks(int time, int div) return ret; } -#ifdef OMAP_RFBI_RATE_LIMIT -unsigned long rfbi_get_max_tx_rate(void) -{ - unsigned long l4_rate, dss1_rate; - int min_l4_ticks = 0; - int i; - - /* According to TI this can't be calculated so make the - * adjustments for a couple of known frequencies and warn for - * others. - */ - static const struct { - unsigned long l4_clk; /* HZ */ - unsigned long dss1_clk; /* HZ */ - unsigned long min_l4_ticks; - } ftab[] = { - { 55, 132, 7, }, /* 7.86 MPix/s */ - { 110, 110, 12, }, /* 9.16 MPix/s */ - { 110, 132, 10, }, /* 11 Mpix/s */ - { 120, 120, 10, }, /* 12 Mpix/s */ - { 133, 133, 10, }, /* 13.3 Mpix/s */ - }; - - l4_rate = rfbi.l4_khz / 1000; - dss1_rate = dss_clk_get_rate(DSS_CLK_FCK) / 1000000; - - for (i = 0; i < ARRAY_SIZE(ftab); i++) { - /* Use a window instead of an exact match, to account - * for different DPLL multiplier / divider pairs. - */ - if (abs(ftab[i].l4_clk - l4_rate) < 3 && - abs(ftab[i].dss1_clk - dss1_rate) < 3) { - min_l4_ticks = ftab[i].min_l4_ticks; - break; - } - } - if (i == ARRAY_SIZE(ftab)) { - /* Can't be sure, return anyway the maximum not - * rate-limited. This might cause a problem only for the - * tearing synchronisation. - */ - DSSERR("can't determine maximum RFBI transfer rate\n"); - return rfbi.l4_khz * 1000; - } - return rfbi.l4_khz * 1000 / min_l4_ticks; -} -#else -int rfbi_get_max_tx_rate(void) -{ - return rfbi.l4_khz * 1000; -} -#endif - static void rfbi_get_clk_info(u32 *clk_period, u32 *max_clk_div) { *clk_period = 1000000000 / rfbi.l4_khz; @@ -683,44 +607,7 @@ int omap_rfbi_enable_te(bool enable, unsigned line) } EXPORT_SYMBOL(omap_rfbi_enable_te); -#if 0 -static void rfbi_enable_config(int enable1, int enable2) -{ - u32 l; - int cs = 0; - - if (enable1) - cs |= 1<<0; - if (enable2) - cs |= 1<<1; - - rfbi_enable_clocks(1); - - l = rfbi_read_reg(RFBI_CONTROL); - - l = FLD_MOD(l, cs, 3, 2); - l = FLD_MOD(l, 0, 1, 1); - - rfbi_write_reg(RFBI_CONTROL, l); - - - l = rfbi_read_reg(RFBI_CONFIG(0)); - l = FLD_MOD(l, 0, 3, 2); /* TRIGGERMODE: ITE */ - /*l |= FLD_VAL(2, 8, 7); */ /* L4FORMAT, 2pix/L4 */ - /*l |= FLD_VAL(0, 8, 7); */ /* L4FORMAT, 1pix/L4 */ - - l = FLD_MOD(l, 0, 16, 16); /* A0POLARITY */ - l = FLD_MOD(l, 1, 20, 20); /* TE_VSYNC_POLARITY */ - l = FLD_MOD(l, 1, 21, 21); /* HSYNCPOLARITY */ - - l = FLD_MOD(l, OMAP_DSS_RFBI_PARALLELMODE_8, 1, 0); - rfbi_write_reg(RFBI_CONFIG(0), l); - - rfbi_enable_clocks(0); -} -#endif - -int rfbi_configure(int rfbi_module, int bpp, int lines) +static int rfbi_configure(int rfbi_module, int bpp, int lines) { u32 l; int cycle1 = 0, cycle2 = 0, cycle3 = 0; @@ -1022,13 +909,8 @@ static int omap_rfbihw_probe(struct platform_device *pdev) rfbi.pdev = pdev; - spin_lock_init(&rfbi.cmd_lock); sema_init(&rfbi.bus_lock, 1); - init_completion(&rfbi.cmd_done); - atomic_set(&rfbi.cmd_fifo_full, 0); - atomic_set(&rfbi.cmd_pending, 0); - rfbi_mem = platform_get_resource(rfbi.pdev, IORESOURCE_MEM, 0); if (!rfbi_mem) { DSSERR("can't get IORESOURCE_MEM RFBI\n");