From 8bf62ecee58360749c5f0e68bc97d5e02a6816b1 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Thu, 12 May 2005 15:29:42 -0400 Subject: [PATCH 001/101] [libata] C/H/S support, for older devices --- drivers/scsi/libata-core.c | 140 ++++++++++++++---- drivers/scsi/libata-scsi.c | 292 +++++++++++++++++++++++-------------- include/linux/ata.h | 14 ++ include/linux/libata.h | 6 + 4 files changed, 318 insertions(+), 134 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 0b5d3a5b7eda..96355b05fe5c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -52,6 +52,7 @@ static unsigned int ata_busy_sleep (struct ata_port *ap, unsigned long tmout_pat, unsigned long tmout); +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev); static void ata_set_mode(struct ata_port *ap); static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev); static unsigned int ata_get_mode_mask(struct ata_port *ap, int shift); @@ -1008,7 +1009,7 @@ static inline void ata_dump_id(struct ata_device *dev) static void ata_dev_identify(struct ata_port *ap, unsigned int device) { struct ata_device *dev = &ap->device[device]; - unsigned int i; + unsigned int major_version; u16 tmp; unsigned long xfer_modes; u8 status; @@ -1106,9 +1107,9 @@ retry: * common ATA, ATAPI feature tests */ - /* we require LBA and DMA support (bits 8 & 9 of word 49) */ - if (!ata_id_has_dma(dev->id) || !ata_id_has_lba(dev->id)) { - printk(KERN_DEBUG "ata%u: no dma/lba\n", ap->id); + /* we require DMA support (bits 8 of word 49) */ + if (!ata_id_has_dma(dev->id)) { + printk(KERN_DEBUG "ata%u: no dma\n", ap->id); goto err_out_nosup; } @@ -1128,32 +1129,69 @@ retry: if (!ata_id_is_ata(dev->id)) /* sanity check */ goto err_out_nosup; + /* get major version */ tmp = dev->id[ATA_ID_MAJOR_VER]; - for (i = 14; i >= 1; i--) - if (tmp & (1 << i)) + for (major_version = 14; major_version >= 1; major_version--) + if (tmp & (1 << major_version)) break; - /* we require at least ATA-3 */ - if (i < 3) { - printk(KERN_DEBUG "ata%u: no ATA-3\n", ap->id); - goto err_out_nosup; - } + /* + * The exact sequence expected by certain pre-ATA4 drives is: + * SRST RESET + * IDENTIFY + * INITIALIZE DEVICE PARAMETERS + * anything else.. + * Some drives were very specific about that exact sequence. + */ + if (major_version < 4 || (!ata_id_has_lba(dev->id))) + ata_dev_init_params(ap, dev); + + if (ata_id_has_lba(dev->id)) { + dev->flags |= ATA_DFLAG_LBA; + + if (ata_id_has_lba48(dev->id)) { + dev->flags |= ATA_DFLAG_LBA48; + dev->n_sectors = ata_id_u64(dev->id, 100); + } else { + dev->n_sectors = ata_id_u32(dev->id, 60); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors:%s\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + dev->flags & ATA_DFLAG_LBA48 ? " LBA48" : " LBA"); + } else { + /* CHS */ + + /* Default translation */ + dev->cylinders = dev->id[1]; + dev->heads = dev->id[3]; + dev->sectors = dev->id[6]; + dev->n_sectors = dev->cylinders * dev->heads * dev->sectors; + + if (ata_id_current_chs_valid(dev->id)) { + /* Current CHS translation is valid. */ + dev->cylinders = dev->id[54]; + dev->heads = dev->id[55]; + dev->sectors = dev->id[56]; + + dev->n_sectors = ata_id_u32(dev->id, 57); + } + + /* print device info to dmesg */ + printk(KERN_INFO "ata%u: dev %u ATA-%d, max %s, %Lu sectors: CHS %d/%d/%d\n", + ap->id, device, + major_version, + ata_mode_string(xfer_modes), + (unsigned long long)dev->n_sectors, + (int)dev->cylinders, (int)dev->heads, (int)dev->sectors); - if (ata_id_has_lba48(dev->id)) { - dev->flags |= ATA_DFLAG_LBA48; - dev->n_sectors = ata_id_u64(dev->id, 100); - } else { - dev->n_sectors = ata_id_u32(dev->id, 60); } ap->host->max_cmd_len = 16; - - /* print device info to dmesg */ - printk(KERN_INFO "ata%u: dev %u ATA, max %s, %Lu sectors:%s\n", - ap->id, device, - ata_mode_string(xfer_modes), - (unsigned long long)dev->n_sectors, - dev->flags & ATA_DFLAG_LBA48 ? " lba48" : ""); } /* ATAPI-specific feature tests */ @@ -1946,6 +1984,54 @@ static void ata_dev_set_xfermode(struct ata_port *ap, struct ata_device *dev) DPRINTK("EXIT\n"); } +/** + * ata_dev_init_params - Issue INIT DEV PARAMS command + * @ap: Port associated with device @dev + * @dev: Device to which command will be sent + * + * LOCKING: + */ + +static void ata_dev_init_params(struct ata_port *ap, struct ata_device *dev) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + int rc; + unsigned long flags; + u16 sectors = dev->id[6]; + u16 heads = dev->id[3]; + + /* Number of sectors per track 1-255. Number of heads 1-16 */ + if (sectors < 1 || sectors > 255 || heads < 1 || heads > 16) + return; + + /* set up init dev params taskfile */ + DPRINTK("init dev params \n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + qc->tf.command = ATA_CMD_INIT_DEV_PARAMS; + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.protocol = ATA_PROT_NODATA; + qc->tf.nsect = sectors; + qc->tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + /** * ata_sg_clean - * @qc: @@ -2736,8 +2822,12 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, ata_tf_init(ap, &qc->tf, dev->devno); - if (dev->flags & ATA_DFLAG_LBA48) - qc->tf.flags |= ATA_TFLAG_LBA48; + if (dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + if (dev->flags & ATA_DFLAG_LBA48) + qc->tf.flags |= ATA_TFLAG_LBA48; + } } return qc; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4c96df060c3b..8b065ef0e39a 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -435,78 +435,108 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 sect = 0; - u32 n_sect = 0; + u64 block = 0; + u32 n_block = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - tf->device |= ATA_LBA; if (scsicmd[0] == VERIFY) { - sect |= ((u64)scsicmd[2]) << 24; - sect |= ((u64)scsicmd[3]) << 16; - sect |= ((u64)scsicmd[4]) << 8; - sect |= ((u64)scsicmd[5]); + block |= ((u64)scsicmd[2]) << 24; + block |= ((u64)scsicmd[3]) << 16; + block |= ((u64)scsicmd[4]) << 8; + block |= ((u64)scsicmd[5]); - n_sect |= ((u32)scsicmd[7]) << 8; - n_sect |= ((u32)scsicmd[8]); + n_block |= ((u32)scsicmd[7]) << 8; + n_block |= ((u32)scsicmd[8]); } else if (scsicmd[0] == VERIFY_16) { - sect |= ((u64)scsicmd[2]) << 56; - sect |= ((u64)scsicmd[3]) << 48; - sect |= ((u64)scsicmd[4]) << 40; - sect |= ((u64)scsicmd[5]) << 32; - sect |= ((u64)scsicmd[6]) << 24; - sect |= ((u64)scsicmd[7]) << 16; - sect |= ((u64)scsicmd[8]) << 8; - sect |= ((u64)scsicmd[9]); + block |= ((u64)scsicmd[2]) << 56; + block |= ((u64)scsicmd[3]) << 48; + block |= ((u64)scsicmd[4]) << 40; + block |= ((u64)scsicmd[5]) << 32; + block |= ((u64)scsicmd[6]) << 24; + block |= ((u64)scsicmd[7]) << 16; + block |= ((u64)scsicmd[8]) << 8; + block |= ((u64)scsicmd[9]); - n_sect |= ((u32)scsicmd[10]) << 24; - n_sect |= ((u32)scsicmd[11]) << 16; - n_sect |= ((u32)scsicmd[12]) << 8; - n_sect |= ((u32)scsicmd[13]); + n_block |= ((u32)scsicmd[10]) << 24; + n_block |= ((u32)scsicmd[11]) << 16; + n_block |= ((u32)scsicmd[12]) << 8; + n_block |= ((u32)scsicmd[13]); } else return 1; - if (!n_sect) + if (!n_block) return 1; - if (sect >= dev_sectors) + if (block >= dev_sectors) return 1; - if ((sect + n_sect) > dev_sectors) + if ((block + n_block) > dev_sectors) return 1; if (lba48) { - if (n_sect > (64 * 1024)) + if (n_block > (64 * 1024)) return 1; } else { - if (n_sect > 256) + if (n_block > 256) return 1; } - if (lba48) { - tf->command = ATA_CMD_VERIFY_EXT; + if (lba) { + if (lba48) { + tf->command = ATA_CMD_VERIFY_EXT; - tf->hob_nsect = (n_sect >> 8) & 0xff; + tf->hob_nsect = (n_block >> 8) & 0xff; - tf->hob_lbah = (sect >> 40) & 0xff; - tf->hob_lbam = (sect >> 32) & 0xff; - tf->hob_lbal = (sect >> 24) & 0xff; + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + tf->command = ATA_CMD_VERIFY; + + tf->device |= (block >> 24) & 0xf; + } + + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return 1; + tf->command = ATA_CMD_VERIFY; - - tf->device |= (sect >> 24) & 0xf; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; } - tf->nsect = n_sect & 0xff; - - tf->lbah = (sect >> 16) & 0xff; - tf->lbam = (sect >> 8) & 0xff; - tf->lbal = sect & 0xff; - return 0; } @@ -533,11 +563,14 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) { struct ata_taskfile *tf = &qc->tf; + struct ata_device *dev = qc->dev; + unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; + u64 block = 0; + u32 n_block = 0; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; - tf->device |= ATA_LBA; if (scsicmd[0] == READ_10 || scsicmd[0] == READ_6 || scsicmd[0] == READ_16) { @@ -547,80 +580,111 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->flags |= ATA_TFLAG_WRITE; } + /* Calculate the SCSI LBA and transfer length. */ if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - if (lba48) { - tf->hob_nsect = scsicmd[7]; - tf->hob_lbal = scsicmd[2]; + block |= ((u64)scsicmd[2]) << 24; + block |= ((u64)scsicmd[3]) << 16; + block |= ((u64)scsicmd[4]) << 8; + block |= ((u64)scsicmd[5]); - qc->nsect = ((unsigned int)scsicmd[7] << 8) | - scsicmd[8]; - } else { - /* if we don't support LBA48 addressing, the request - * -may- be too large. */ - if ((scsicmd[2] & 0xf0) || scsicmd[7]) - return 1; - - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[2]; - - qc->nsect = scsicmd[8]; - } - - tf->nsect = scsicmd[8]; - tf->lbal = scsicmd[5]; - tf->lbam = scsicmd[4]; - tf->lbah = scsicmd[3]; + n_block |= ((u32)scsicmd[7]) << 8; + n_block |= ((u32)scsicmd[8]); VPRINTK("ten-byte command\n"); - return 0; - } - - if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - qc->nsect = tf->nsect = scsicmd[4]; - tf->lbal = scsicmd[3]; - tf->lbam = scsicmd[2]; - tf->lbah = scsicmd[1] & 0x1f; /* mask out reserved bits */ - + } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { + block |= ((u64)scsicmd[2]) << 8; + block |= ((u64)scsicmd[3]); + n_block |= ((u32)scsicmd[4]); + VPRINTK("six-byte command\n"); - return 0; - } + } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { + block |= ((u64)scsicmd[2]) << 56; + block |= ((u64)scsicmd[3]) << 48; + block |= ((u64)scsicmd[4]) << 40; + block |= ((u64)scsicmd[5]) << 32; + block |= ((u64)scsicmd[6]) << 24; + block |= ((u64)scsicmd[7]) << 16; + block |= ((u64)scsicmd[8]) << 8; + block |= ((u64)scsicmd[9]); - if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - /* rule out impossible LBAs and sector counts */ - if (scsicmd[2] || scsicmd[3] || scsicmd[10] || scsicmd[11]) - return 1; - - if (lba48) { - tf->hob_nsect = scsicmd[12]; - tf->hob_lbal = scsicmd[6]; - tf->hob_lbam = scsicmd[5]; - tf->hob_lbah = scsicmd[4]; - - qc->nsect = ((unsigned int)scsicmd[12] << 8) | - scsicmd[13]; - } else { - /* once again, filter out impossible non-zero values */ - if (scsicmd[4] || scsicmd[5] || scsicmd[12] || - (scsicmd[6] & 0xf0)) - return 1; - - /* stores LBA27:24 in lower 4 bits of device reg */ - tf->device |= scsicmd[6]; - - qc->nsect = scsicmd[13]; - } - - tf->nsect = scsicmd[13]; - tf->lbal = scsicmd[9]; - tf->lbam = scsicmd[8]; - tf->lbah = scsicmd[7]; + n_block |= ((u32)scsicmd[10]) << 24; + n_block |= ((u32)scsicmd[11]) << 16; + n_block |= ((u32)scsicmd[12]) << 8; + n_block |= ((u32)scsicmd[13]); VPRINTK("sixteen-byte command\n"); - return 0; + } else { + DPRINTK("no-byte command\n"); + return 1; } - DPRINTK("no-byte command\n"); - return 1; + /* Check and compose ATA command */ + if (!n_block) + /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */ + return 1; + + if (lba) { + if (lba48) { + /* The request -may- be too large for LBA48. */ + if ((block >> 48) || (n_block > 65536)) + return 1; + + tf->hob_nsect = (n_block >> 8) & 0xff; + + tf->hob_lbah = (block >> 40) & 0xff; + tf->hob_lbam = (block >> 32) & 0xff; + tf->hob_lbal = (block >> 24) & 0xff; + } else { + /* LBA28 */ + + /* The request -may- be too large for LBA28. */ + if ((block >> 28) || (n_block > 256)) + return 1; + + tf->device |= (block >> 24) & 0xf; + } + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; + + tf->lbah = (block >> 16) & 0xff; + tf->lbam = (block >> 8) & 0xff; + tf->lbal = block & 0xff; + + tf->device |= ATA_LBA; + } else { + /* CHS */ + u32 sect, head, cyl, track; + + /* The request -may- be too large for CHS addressing. */ + if ((block >> 28) || (n_block > 256)) + return 1; + + /* Convert LBA to CHS */ + track = (u32)block / dev->sectors; + cyl = track / dev->heads; + head = track % dev->heads; + sect = (u32)block % dev->sectors + 1; + + DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", + (u32)block, track, cyl, head, sect); + + /* Check whether the converted CHS can fit. + Cylinder: 0-65535 + Head: 0-15 + Sector: 1-255*/ + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + return 1; + + qc->nsect = n_block; + tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ + tf->lbal = sect; + tf->lbam = cyl; + tf->lbah = cyl >> 8; + tf->device |= head; + } + + return 0; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -1167,10 +1231,20 @@ unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf, VPRINTK("ENTER\n"); - if (ata_id_has_lba48(args->id)) - n_sectors = ata_id_u64(args->id, 100); - else - n_sectors = ata_id_u32(args->id, 60); + if (ata_id_has_lba(args->id)) { + if (ata_id_has_lba48(args->id)) + n_sectors = ata_id_u64(args->id, 100); + else + n_sectors = ata_id_u32(args->id, 60); + } else { + /* CHS default translation */ + n_sectors = args->id[1] * args->id[3] * args->id[6]; + + if (ata_id_current_chs_valid(args->id)) + /* CHS current translation */ + n_sectors = ata_id_u32(args->id, 57); + } + n_sectors--; /* ATA TotalUserSectors - 1 */ tmp = n_sectors; /* note: truncates, if lba48 */ diff --git a/include/linux/ata.h b/include/linux/ata.h index f178894edd04..d8981402cd5b 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -125,6 +125,7 @@ enum { ATA_CMD_PACKET = 0xA0, ATA_CMD_VERIFY = 0x40, ATA_CMD_VERIFY_EXT = 0x42, + ATA_CMD_INIT_DEV_PARAMS = 0x91, /* SETFEATURES stuff */ SETFEATURES_XFER = 0x03, @@ -174,6 +175,7 @@ enum { ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */ ATA_TFLAG_DEVICE = (1 << 2), /* enable r/w to device reg */ ATA_TFLAG_WRITE = (1 << 3), /* data dir: host->dev==1 (write) */ + ATA_TFLAG_LBA = (1 << 4), /* enable LBA */ }; enum ata_tf_protocols { @@ -242,6 +244,18 @@ struct ata_taskfile { ((u64) (id)[(n) + 1] << 16) | \ ((u64) (id)[(n) + 0]) ) +static inline int ata_id_current_chs_valid(u16 *id) +{ + /* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command + has not been issued to the device then the values of + id[54] to id[56] are vendor specific. */ + return (id[53] & 0x01) && /* Current translation valid */ + id[54] && /* cylinders in current translation */ + id[55] && /* heads in current translation */ + id[55] <= 16 && + id[56]; /* sectors in current translation */ +} + static inline int atapi_cdb_len(u16 *dev_id) { u16 tmp = dev_id[0] & 0x3; diff --git a/include/linux/libata.h b/include/linux/libata.h index 505160ab472b..bd0df84cfd87 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -95,6 +95,7 @@ enum { ATA_DFLAG_LBA48 = (1 << 0), /* device supports LBA48 */ ATA_DFLAG_PIO = (1 << 1), /* device currently in PIO mode */ ATA_DFLAG_LOCK_SECTORS = (1 << 2), /* don't adjust max_sectors */ + ATA_DFLAG_LBA = (1 << 3), /* device supports LBA */ ATA_DEV_UNKNOWN = 0, /* unknown device */ ATA_DEV_ATA = 1, /* ATA device */ @@ -278,6 +279,11 @@ struct ata_device { u8 xfer_protocol; /* taskfile xfer protocol */ u8 read_cmd; /* opcode to use on read */ u8 write_cmd; /* opcode to use on write */ + + /* for CHS addressing */ + u16 cylinders; /* Number of cylinders */ + u16 heads; /* Number of heads */ + u16 sectors; /* Number of sectors per track */ }; struct ata_port { From edb3366703224d5d8df573ae698ccd6b488dc743 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 28 Jul 2005 10:36:22 +0900 Subject: [PATCH 002/101] [PATCH] SATA: rewritten sil24 driver This is rewritten sil24 driver against v2.6.13-rc3. Rewritten based on driver originally submitted by Silicon Image. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/Kconfig | 8 + drivers/scsi/Makefile | 1 + drivers/scsi/sata_sil24.c | 786 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 795 insertions(+) create mode 100644 drivers/scsi/sata_sil24.c diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 96df148ed969..939d3442c13a 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -499,6 +499,14 @@ config SCSI_SATA_SIL If unsure, say N. +config SCSI_SATA_SIL24 + tristate "Silicon Image 3124/3132 SATA support" + depends on SCSI_SATA && PCI && EXPERIMENTAL + help + This option enables support for Silicon Image 3124/3132 Serial ATA. + + If unsure, say N. + config SCSI_SATA_SIS tristate "SiS 964/180 SATA support" depends on SCSI_SATA && PCI && EXPERIMENTAL diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 3746fb9fa2f5..64aaab64aeb6 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -126,6 +126,7 @@ obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o +obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c new file mode 100644 index 000000000000..9958bc10a258 --- /dev/null +++ b/drivers/scsi/sata_sil24.c @@ -0,0 +1,786 @@ +/* + * sata_sil24.c - Driver for Silicon Image 3124/3132 SATA-2 controllers + * + * Copyright 2005 Tejun Heo + * + * Based on preview driver from Silicon Image. + * + * NOTE: No NCQ/ATAPI support yet. The preview driver didn't support + * NCQ nor ATAPI, and, unfortunately, I couldn't find out how to make + * those work. Enabling those shouldn't be difficult. Basic + * structure is all there (in libata-dev tree). If you have any + * information about this hardware, please contact me or linux-ide. + * Info is needed on... + * + * - How to issue tagged commands and turn on sactive on issue accordingly. + * - Where to put an ATAPI command and how to tell the device to send it. + * - How to enable/use 64bit. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "scsi.h" +#include +#include + +#define DRV_NAME "sata_sil24" +#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */ + +#define NR_PORTS 4 + +/* + * Port request block (PRB) 32 bytes + */ +struct sil24_prb { + u16 ctrl; + u16 prot; + u32 rx_cnt; + u8 fis[6 * 4]; +}; + +/* + * Scatter gather entry (SGE) 16 bytes + */ +struct sil24_sge { + u64 addr; + u32 cnt; + u32 flags; +}; + +/* + * Port multiplier + */ +struct sil24_port_multiplier { + u32 diag; + u32 sactive; +}; + +enum { + /* + * Global controller registers (128 bytes @ BAR0) + */ + /* 32 bit regs */ + HOST_SLOT_STAT = 0x00, /* 32 bit slot stat * 4 */ + HOST_CTRL = 0x40, + HOST_IRQ_STAT = 0x44, + HOST_PHY_CFG = 0x48, + HOST_BIST_CTRL = 0x50, + HOST_BIST_PTRN = 0x54, + HOST_BIST_STAT = 0x58, + HOST_MEM_BIST_STAT = 0x5c, + HOST_FLASH_CMD = 0x70, + /* 8 bit regs */ + HOST_FLASH_DATA = 0x74, + HOST_TRANSITION_DETECT = 0x75, + HOST_GPIO_CTRL = 0x76, + HOST_I2C_ADDR = 0x78, /* 32 bit */ + HOST_I2C_DATA = 0x7c, + HOST_I2C_XFER_CNT = 0x7e, + HOST_I2C_CTRL = 0x7f, + + /* HOST_SLOT_STAT bits */ + HOST_SSTAT_ATTN = (1 << 31), + + /* + * Port registers + * (8192 bytes @ +0x0000, +0x2000, +0x4000 and +0x6000 @ BAR2) + */ + PORT_REGS_SIZE = 0x2000, + PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ + /* TF is overlayed w/ PRB regs in the preview driver, + * but it doesn't seem to work. */ + PORT_TF = 0x0000, + + PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ + /* 32 bit regs */ + PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */ + PORT_CTRL_CLR = 0x1004, + PORT_IRQ_STAT = 0x1008, + PORT_IRQ_ENABLE_SET = 0x1010, + PORT_IRQ_ENABLE_CLR = 0x1014, + PORT_ACTIVATE_UPPER_ADDR= 0x101c, + PORT_EXEC_FIFO = 0x1020, + PORT_CMD_ERR = 0x1024, + PORT_FIS_CFG = 0x1028, + PORT_FIFO_THRES = 0x102c, + /* 16 bit regs */ + PORT_DECODE_ERR_CNT = 0x1040, + PORT_DECODE_ERR_THRESH = 0x1042, + PORT_CRC_ERR_CNT = 0x1044, + PORT_CRC_ERR_THRESH = 0x1046, + PORT_HSHK_ERR_CNT = 0x1048, + PORT_HSHK_ERR_THRESH = 0x104a, + /* 32 bit regs */ + PORT_PHY_CFG = 0x1050, + PORT_SLOT_STAT = 0x1800, + PORT_CMD_ACTIVATE = 0x1c00, /* 64 bit cmd activate * 31 (248 bytes) */ + PORT_EXEC_DIAG = 0x1e00, /* 32bit exec diag * 16 (64 bytes, 0-10 used on 3124) */ + PORT_PSD_DIAG = 0x1e40, /* 32bit psd diag * 16 (64 bytes, 0-8 used on 3124) */ + PORT_SCONTROL = 0x1f00, + PORT_SSTATUS = 0x1f04, + PORT_SERROR = 0x1f08, + PORT_SACTIVE = 0x1f0c, + + /* PORT_CTRL_STAT bits */ + PORT_CS_PORT_RST = (1 << 0), /* port reset */ + PORT_CS_DEV_RST = (1 << 1), /* device reset */ + PORT_CS_INIT = (1 << 2), /* port initialize */ + PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ + PORT_CS_RESUME = (1 << 4), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 5), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 6), /* port multiplier enable */ + PORT_CS_RDY = (1 << 7), /* port ready to accept commands */ + + /* PORT_IRQ_STAT/ENABLE_SET/CLR */ + /* bits[11:0] are masked */ + PORT_IRQ_COMPLETE = (1 << 0), /* command(s) completed */ + PORT_IRQ_ERROR = (1 << 1), /* command execution error */ + PORT_IRQ_PORTRDY_CHG = (1 << 2), /* port ready change */ + PORT_IRQ_PWR_CHG = (1 << 3), /* power management change */ + PORT_IRQ_PHYRDY_CHG = (1 << 4), /* PHY ready change */ + PORT_IRQ_COMWAKE = (1 << 5), /* COMWAKE received */ + PORT_IRQ_UNK_FIS = (1 << 6), /* Unknown FIS received */ + PORT_IRQ_SDB_FIS = (1 << 11), /* SDB FIS received */ + + /* bits[27:16] are unmasked (raw) */ + PORT_IRQ_RAW_SHIFT = 16, + PORT_IRQ_MASKED_MASK = 0x7ff, + PORT_IRQ_RAW_MASK = (0x7ff << PORT_IRQ_RAW_SHIFT), + + /* ENABLE_SET/CLR specific, intr steering - 2 bit field */ + PORT_IRQ_STEER_SHIFT = 30, + PORT_IRQ_STEER_MASK = (3 << PORT_IRQ_STEER_SHIFT), + + /* PORT_CMD_ERR constants */ + PORT_CERR_DEV = 1, /* Error bit in D2H Register FIS */ + PORT_CERR_SDB = 2, /* Error bit in SDB FIS */ + PORT_CERR_DATA = 3, /* Error in data FIS not detected by dev */ + PORT_CERR_SEND = 4, /* Initial cmd FIS transmission failure */ + PORT_CERR_INCONSISTENT = 5, /* Protocol mismatch */ + PORT_CERR_DIRECTION = 6, /* Data direction mismatch */ + PORT_CERR_UNDERRUN = 7, /* Ran out of SGEs while writing */ + PORT_CERR_OVERRUN = 8, /* Ran out of SGEs while reading */ + PORT_CERR_PKT_PROT = 11, /* DIR invalid in 1st PIO setup of ATAPI */ + PORT_CERR_SGT_BOUNDARY = 16, /* PLD ecode 00 - SGT not on qword boundary */ + PORT_CERR_SGT_TGTABRT = 17, /* PLD ecode 01 - target abort */ + PORT_CERR_SGT_MSTABRT = 18, /* PLD ecode 10 - master abort */ + PORT_CERR_SGT_PCIPERR = 19, /* PLD ecode 11 - PCI parity err while fetching SGT */ + PORT_CERR_CMD_BOUNDARY = 24, /* ctrl[15:13] 001 - PRB not on qword boundary */ + PORT_CERR_CMD_TGTABRT = 25, /* ctrl[15:13] 010 - target abort */ + PORT_CERR_CMD_MSTABRT = 26, /* ctrl[15:13] 100 - master abort */ + PORT_CERR_CMD_PCIPERR = 27, /* ctrl[15:13] 110 - PCI parity err while fetching PRB */ + PORT_CERR_XFR_UNDEF = 32, /* PSD ecode 00 - undefined */ + PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ + PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ + PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ + PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */ + + /* + * Other constants + */ + SGE_TRM = (1 << 31), /* Last SGE in chain */ + PRB_SOFT_RST = (1 << 7), /* Soft reset request (ign BSY?) */ + + /* board id */ + BID_SIL3124 = 0, + BID_SIL3132 = 1, + + IRQ_STAT_4PORTS = 0xf, +}; + +struct sil24_cmd_block { + struct sil24_prb prb; + struct sil24_sge sge[LIBATA_MAX_PRD]; +}; + +/* + * ap->private_data + * + * The preview driver always returned 0 for status. We emulate it + * here from the previous interrupt. + */ +struct sil24_port_priv { + void *port; + struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ + dma_addr_t cmd_block_dma; /* DMA base addr for them */ +}; + +/* ap->host_set->private_data */ +struct sil24_host_priv { + void *host_base; /* global controller control (128 bytes @BAR0) */ + void *port_base; /* port registers (4 * 8192 bytes @BAR2) */ +}; + +static u8 sil24_check_status(struct ata_port *ap); +static u8 sil24_check_err(struct ata_port *ap); +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_phy_reset(struct ata_port *ap); +static void sil24_qc_prep(struct ata_queued_cmd *qc); +static int sil24_qc_issue(struct ata_queued_cmd *qc); +static void sil24_irq_clear(struct ata_port *ap); +static void sil24_eng_timeout(struct ata_port *ap); +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static int sil24_port_start(struct ata_port *ap); +static void sil24_port_stop(struct ata_port *ap); +static void sil24_host_stop(struct ata_host_set *host_set); +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static struct pci_device_id sil24_pci_tbl[] = { + { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, + { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, +}; + +static struct pci_driver sil24_pci_driver = { + .name = DRV_NAME, + .id_table = sil24_pci_tbl, + .probe = sil24_init_one, + .remove = ata_pci_remove_one, /* safe? */ +}; + +static Scsi_Host_Template sil24_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .eh_strategy_handler = ata_scsi_error, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, + .ordered_flush = 1, /* NCQ not supported yet */ +}; + +static struct ata_port_operations sil24_ops = { + .port_disable = ata_port_disable, + + .check_status = sil24_check_status, + .check_altstatus = sil24_check_status, + .check_err = sil24_check_err, + .dev_select = ata_noop_dev_select, + + .phy_reset = sil24_phy_reset, + + .qc_prep = sil24_qc_prep, + .qc_issue = sil24_qc_issue, + + .eng_timeout = sil24_eng_timeout, + + .irq_handler = sil24_interrupt, + .irq_clear = sil24_irq_clear, + + .scr_read = sil24_scr_read, + .scr_write = sil24_scr_write, + + .port_start = sil24_port_start, + .port_stop = sil24_port_stop, + .host_stop = sil24_host_stop, +}; + +static struct ata_port_info sil24_port_info[] = { + /* sil_3124 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3132 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, +}; + +static u8 sil24_check_status(struct ata_port *ap) +{ + return ATA_DRDY; +} + +static u8 sil24_check_err(struct ata_port *ap) +{ + return 0; +} + +static int sil24_scr_map[] = { + [SCR_CONTROL] = 0, + [SCR_STATUS] = 1, + [SCR_ERROR] = 2, + [SCR_ACTIVE] = 3, +}; + +static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + return readl(scr_addr + sil24_scr_map[sc_reg] * 4); + } + return 0xffffffffU; +} + +static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) +{ + void *scr_addr = (void *)ap->ioaddr.scr_addr; + if (sc_reg < ARRAY_SIZE(sil24_scr_map)) { + void *addr; + addr = scr_addr + sil24_scr_map[sc_reg] * 4; + writel(val, scr_addr + sil24_scr_map[sc_reg] * 4); + } +} + +static void sil24_phy_reset(struct ata_port *ap) +{ + __sata_phy_reset(ap); + /* + * No ATAPI yet. Just unconditionally indicate ATA device. + * If ATAPI device is attached, it will fail ATA_CMD_ID_ATA + * and libata core will ignore the device. + */ + if (!(ap->flags & ATA_FLAG_PORT_DISABLED)) + ap->device[0].class = ATA_DEV_ATA; +} + +static inline void sil24_fill_sg(struct ata_queued_cmd *qc, + struct sil24_cmd_block *cb) +{ + struct scatterlist *sg = qc->sg; + struct sil24_sge *sge = cb->sge; + unsigned i; + + for (i = 0; i < qc->n_elem; i++, sg++, sge++) { + sge->addr = cpu_to_le64(sg_dma_address(sg)); + sge->cnt = cpu_to_le32(sg_dma_len(sg)); + sge->flags = 0; + sge->flags = i < qc->n_elem - 1 ? 0 : cpu_to_le32(SGE_TRM); + } +} + +static void sil24_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + struct sil24_cmd_block *cb = pp->cmd_block + qc->tag; + struct sil24_prb *prb = &cb->prb; + + switch (qc->tf.protocol) { + case ATA_PROT_PIO: + case ATA_PROT_DMA: + case ATA_PROT_NODATA: + break; + default: + /* ATAPI isn't supported yet */ + BUG(); + } + + ata_tf_to_fis(&qc->tf, prb->fis, 0); + + if (qc->flags & ATA_QCFLAG_DMAMAP) + sil24_fill_sg(qc, cb); +} + +static int sil24_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct sil24_port_priv *pp = ap->private_data; + dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); + + writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE); + return 0; +} + +static void sil24_irq_clear(struct ata_port *ap) +{ + /* unused */ +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + int cnt; + u32 tmp; + + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + + /* Reset controller state. Is this correct? */ + writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); + readl(port + PORT_CTRL_STAT); /* sync */ + + /* Max ~100ms */ + for (cnt = 0; cnt < 1000; cnt++) { + udelay(100); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_DEV_RST)) + break; + } + if (tmp & PORT_CS_DEV_RST) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); +} + +static void sil24_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + + qc = ata_qc_from_tag(ap, ap->active_tag); + if (!qc) { + printk(KERN_ERR "ata%u: BUG: tiemout without command\n", + ap->id); + return; + } + + /* + * hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + printk(KERN_ERR "ata%u: command timeout\n", ap->id); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + +static inline void sil24_host_intr(struct ata_port *ap) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + u32 slot_stat; + + slot_stat = readl(port + PORT_SLOT_STAT); + if (!(slot_stat & HOST_SSTAT_ATTN)) { + if (qc) + ata_qc_complete(qc, 0); + } else { + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + + /* Clear IRQ/errors */ + writel(irq_stat, port + PORT_IRQ_STAT); + if (cmd_err) + writel(cmd_err, port + PORT_CMD_ERR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (qc) + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); + } +} + +static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct ata_host_set *host_set = dev_instance; + struct sil24_host_priv *hpriv = host_set->private_data; + unsigned handled = 0; + u32 status; + int i; + + status = readl(hpriv->host_base + HOST_IRQ_STAT); + + if (!(status & IRQ_STAT_4PORTS)) + goto out; + + spin_lock(&host_set->lock); + + for (i = 0; i < host_set->n_ports; i++) + if (status & (1 << i)) { + struct ata_port *ap = host_set->ports[i]; + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) + sil24_host_intr(host_set->ports[i]); + else { + u32 tmp; + printk(KERN_WARNING DRV_NAME + ": spurious interrupt from port %d\n", i); + tmp = readl(hpriv->host_base + HOST_CTRL); + tmp &= ~(1 << i); + writel(tmp, hpriv->host_base + HOST_CTRL); + } + handled++; + } + + spin_unlock(&host_set->lock); + out: + return IRQ_RETVAL(handled); +} + +static int sil24_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_host_priv *hpriv = ap->host_set->private_data; + struct sil24_port_priv *pp; + struct sil24_cmd_block *cb; + size_t cb_size = sizeof(*cb); + dma_addr_t cb_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + memset(pp, 0, sizeof(*pp)); + + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); + if (!cb) { + kfree(pp); + return -ENOMEM; + } + memset(cb, 0, cb_size); + + pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE; + pp->cmd_block = cb; + pp->cmd_block_dma = cb_dma; + + ap->private_data = pp; + + return 0; +} + +static void sil24_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct sil24_port_priv *pp = ap->private_data; + size_t cb_size = sizeof(*pp->cmd_block); + + dma_free_coherent(dev, cb_size, pp->cmd_block, pp->cmd_block_dma); + kfree(pp); +} + +static void sil24_host_stop(struct ata_host_set *host_set) +{ + struct sil24_host_priv *hpriv = host_set->private_data; + + iounmap(hpriv->host_base); + iounmap(hpriv->port_base); + kfree(hpriv); +} + +static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version = 0; + unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_probe_ent *probe_ent = NULL; + struct sil24_host_priv *hpriv = NULL; + void *host_base = NULL, *port_base = NULL; + int i, rc; + + if (!printed_version++) + printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + + rc = pci_enable_device(pdev); + if (rc) + return rc; + + rc = pci_request_regions(pdev, DRV_NAME); + if (rc) + goto out_disable; + + rc = -ENOMEM; + /* ioremap mmio registers */ + host_base = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!host_base) + goto out_free; + port_base = ioremap(pci_resource_start(pdev, 2), + pci_resource_len(pdev, 2)); + if (!port_base) + goto out_free; + + /* allocate & init probe_ent and hpriv */ + probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); + if (!probe_ent) + goto out_free; + + hpriv = kmalloc(sizeof(*hpriv), GFP_KERNEL); + if (!hpriv) + goto out_free; + + memset(probe_ent, 0, sizeof(*probe_ent)); + probe_ent->dev = pci_dev_to_dev(pdev); + INIT_LIST_HEAD(&probe_ent->node); + + probe_ent->sht = sil24_port_info[board_id].sht; + probe_ent->host_flags = sil24_port_info[board_id].host_flags; + probe_ent->pio_mask = sil24_port_info[board_id].pio_mask; + probe_ent->udma_mask = sil24_port_info[board_id].udma_mask; + probe_ent->port_ops = sil24_port_info[board_id].port_ops; + probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2; + + probe_ent->irq = pdev->irq; + probe_ent->irq_flags = SA_SHIRQ; + probe_ent->mmio_base = port_base; + probe_ent->private_data = hpriv; + + memset(hpriv, 0, sizeof(*hpriv)); + hpriv->host_base = host_base; + hpriv->port_base = port_base; + + /* + * Configure the device + */ + /* + * FIXME: This device is certainly 64-bit capable. We just + * don't know how to use it. After fixing 32bit activation in + * this function, enable 64bit masks here. + */ + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + printk(KERN_ERR DRV_NAME "(%s): 32-bit consistent DMA enable failed\n", + pci_name(pdev)); + goto out_free; + } + + /* GPIO off */ + writel(0, host_base + HOST_FLASH_CMD); + + /* Mask interrupts during initialization */ + writel(0, host_base + HOST_CTRL); + + for (i = 0; i < probe_ent->n_ports; i++) { + void *port = port_base + i * PORT_REGS_SIZE; + unsigned long portu = (unsigned long)port; + u32 tmp; + int cnt; + + probe_ent->port[i].cmd_addr = portu + PORT_TF; + probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; + + ata_std_ports(&probe_ent->port[i]); + + /* Initial PHY setting */ + writel(0x20c, port + PORT_PHY_CFG); + + /* Clear port RST */ + tmp = readl(port + PORT_CTRL_STAT); + if (tmp & PORT_CS_PORT_RST) { + writel(PORT_CS_PORT_RST, port + PORT_CTRL_CLR); + readl(port + PORT_CTRL_STAT); /* sync */ + for (cnt = 0; cnt < 10; cnt++) { + msleep(10); + tmp = readl(port + PORT_CTRL_STAT); + if (!(tmp & PORT_CS_PORT_RST)) + break; + } + if (tmp & PORT_CS_PORT_RST) + printk(KERN_ERR DRV_NAME + "(%s): failed to clear port RST\n", + pci_name(pdev)); + } + + /* Zero error counters. */ + writel(0x8000, port + PORT_DECODE_ERR_THRESH); + writel(0x8000, port + PORT_CRC_ERR_THRESH); + writel(0x8000, port + PORT_HSHK_ERR_THRESH); + writel(0x0000, port + PORT_DECODE_ERR_CNT); + writel(0x0000, port + PORT_CRC_ERR_CNT); + writel(0x0000, port + PORT_HSHK_ERR_CNT); + + /* FIXME: 32bit activation? */ + writel(0, port + PORT_ACTIVATE_UPPER_ADDR); + writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_STAT); + + /* Configure interrupts */ + writel(0xffff, port + PORT_IRQ_ENABLE_CLR); + writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR | PORT_IRQ_SDB_FIS, + port + PORT_IRQ_ENABLE_SET); + + /* Clear interrupts */ + writel(0x0fff0fff, port + PORT_IRQ_STAT); + writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + } + + /* Turn on interrupts */ + writel(IRQ_STAT_4PORTS, host_base + HOST_CTRL); + + pci_set_master(pdev); + + ata_device_add(probe_ent); + + kfree(probe_ent); + return 0; + + out_free: + if (host_base) + iounmap(host_base); + if (port_base) + iounmap(port_base); + kfree(probe_ent); + kfree(hpriv); + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + return rc; +} + +static int __init sil24_init(void) +{ + return pci_module_init(&sil24_pci_driver); +} + +static void __exit sil24_exit(void) +{ + pci_unregister_driver(&sil24_pci_driver); +} + +MODULE_AUTHOR("Tejun Heo"); +MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, sil24_pci_tbl); + +module_init(sil24_init); +module_exit(sil24_exit); From 1483467faa0170cf401955b3d8d3486ea0fe802d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:42 +0900 Subject: [PATCH 003/101] [PATCH] sil24: add FIXME comment above ata_device_add 01_sil24_add-FIXME-comment.patch Add FIXME comment above ata_device_add. Signed-off-by: Tejun Heo sata_sil24.c | 1 + 1 files changed, 1 insertion(+) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 9958bc10a258..4868ad79b92e 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -749,6 +749,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) pci_set_master(pdev); + /* FIXME: check ata_device_add return value */ ata_device_add(probe_ent); kfree(probe_ent); From 3cc4571c4106735665e048850ff6656de9558d60 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:47 +0900 Subject: [PATCH 004/101] [PATCH] sil24: remove irq disable code on spurious interrupt 02_sil24_remove-irq-disable-on-spurious-intr.patch If interrupt occurs on a disabled port, the driver used to mask the port's interrupt, but we don't know if such action is necessary yet and that's not what other drives do. So, just do nothing and tell IRQ subsystem that it's not our interrupt. Signed-off-by: Tejun Heo sata_sil24.c | 15 +++++---------- 1 files changed, 5 insertions(+), 10 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 15 +++++---------- 1 file changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 4868ad79b92e..0f810cdd3cc2 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -535,17 +535,12 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) if (status & (1 << i)) { struct ata_port *ap = host_set->ports[i]; - if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) + if (ap && !(ap->flags & ATA_FLAG_PORT_DISABLED)) { sil24_host_intr(host_set->ports[i]); - else { - u32 tmp; - printk(KERN_WARNING DRV_NAME - ": spurious interrupt from port %d\n", i); - tmp = readl(hpriv->host_base + HOST_CTRL); - tmp &= ~(1 << i); - writel(tmp, hpriv->host_base + HOST_CTRL); - } - handled++; + handled++; + } else + printk(KERN_ERR DRV_NAME + ": interrupt from disabled port %d\n", i); } spin_unlock(&host_set->lock); From 06460aeaa26ed4a86b92c8451365d3f48abd3786 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:52 +0900 Subject: [PATCH 005/101] [PATCH] sil24: add testing for PCI fault 03_sil24_add-pci-fault-check.patch On entry to interrupt handler, PORT_SLOT_STAT register is read first. Check if PCI fault or device removal has occurred by testing the value for 0xffffffff. Signed-off-by: Tejun Heo sata_sil24.c | 6 ++++++ 1 files changed, 6 insertions(+) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 0f810cdd3cc2..c9318bda46a3 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -527,6 +527,12 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * status = readl(hpriv->host_base + HOST_IRQ_STAT); + if (status == 0xffffffff) { + printk(KERN_ERR DRV_NAME ": IRQ status == 0xffffffff, " + "PCI fault or device removal?\n"); + goto out; + } + if (!(status & IRQ_STAT_4PORTS)) goto out; From 8746618d4f18fab25916686b0d8a6be2c2912de1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:08:57 +0900 Subject: [PATCH 006/101] [PATCH] sil24: move error handling out of hot interrupt path 04_sil24_add-error_intr-function.patch Move error handling from sil24_host_intr into separate function - sil24_error_intr. Signed-off-by: Tejun Heo sata_sil24.c | 55 +++++++++++++++++++++++++++++++------------------------ 1 files changed, 31 insertions(+), 24 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 55 ++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 24 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index c9318bda46a3..6544226c1b28 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -480,6 +480,35 @@ static void sil24_eng_timeout(struct ata_port *ap) sil24_reset_controller(ap); } +static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) +{ + struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; + void *port = pp->port; + u32 irq_stat, cmd_err, sstatus, serror; + + irq_stat = readl(port + PORT_IRQ_STAT); + cmd_err = readl(port + PORT_CMD_ERR); + sstatus = readl(port + PORT_SSTATUS); + serror = readl(port + PORT_SERROR); + + /* Clear IRQ/errors */ + writel(irq_stat, port + PORT_IRQ_STAT); + if (cmd_err) + writel(cmd_err, port + PORT_CMD_ERR); + if (serror) + writel(serror, port + PORT_SERROR); + + printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" + " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", + ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + + if (qc) + ata_qc_complete(qc, ATA_ERR); + + sil24_reset_controller(ap); +} + static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); @@ -491,30 +520,8 @@ static inline void sil24_host_intr(struct ata_port *ap) if (!(slot_stat & HOST_SSTAT_ATTN)) { if (qc) ata_qc_complete(qc, 0); - } else { - u32 irq_stat, cmd_err, sstatus, serror; - - irq_stat = readl(port + PORT_IRQ_STAT); - cmd_err = readl(port + PORT_CMD_ERR); - sstatus = readl(port + PORT_SSTATUS); - serror = readl(port + PORT_SERROR); - - /* Clear IRQ/errors */ - writel(irq_stat, port + PORT_IRQ_STAT); - if (cmd_err) - writel(cmd_err, port + PORT_CMD_ERR); - if (serror) - writel(serror, port + PORT_SERROR); - - printk(KERN_ERR DRV_NAME " ata%u: error interrupt on port%d\n" - " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", - ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); - - if (qc) - ata_qc_complete(qc, ATA_ERR); - - sil24_reset_controller(ap); - } + } else + sil24_error_intr(ap, slot_stat); } static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs) From 33d015b9f24d143859bb40dbe7bbb4c7805cee7d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:02 +0900 Subject: [PATCH 007/101] [PATCH] sil24: remove PORT_TF 05_sil24_remove-PORT_TF.patch Remove PORT_TF, as taskfile isn't located at PORT_TF. Signed-off-by: Tejun Heo sata_sil24.c | 7 +------ 1 files changed, 1 insertion(+), 6 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 6544226c1b28..47a7bfc4a6d8 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -104,9 +104,6 @@ enum { */ PORT_REGS_SIZE = 0x2000, PORT_PRB = 0x0000, /* (32 bytes PRB + 16 bytes SGEs * 6) * 31 (3968 bytes) */ - /* TF is overlayed w/ PRB regs in the preview driver, - * but it doesn't seem to work. */ - PORT_TF = 0x0000, PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ @@ -703,9 +700,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 tmp; int cnt; - probe_ent->port[i].cmd_addr = portu + PORT_TF; - probe_ent->port[i].ctl_addr = portu + PORT_TF + 0xa; - probe_ent->port[i].altstatus_addr = portu + PORT_TF + 0xa; + probe_ent->port[i].cmd_addr = portu; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); From 4f50c3cbb4b608ae4d8ee73ce273d819d901a83f Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:07 +0900 Subject: [PATCH 008/101] [PATCH] sil24: replace pp->port w/ ap->ioaddr.cmd_addr 06_sil24_remove-pp-port.patch As ap->ioaddr.cmd_addr isn't used for PORT_TF anymore, replace pp->port w/ it as AHCI does. Signed-off-by: Tejun Heo sata_sil24.c | 17 ++++++----------- 1 files changed, 6 insertions(+), 11 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 47a7bfc4a6d8..547c29a5613b 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -214,7 +214,6 @@ struct sil24_cmd_block { * here from the previous interrupt. */ struct sil24_port_priv { - void *port; struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ }; @@ -414,10 +413,11 @@ static void sil24_qc_prep(struct ata_queued_cmd *qc) static int sil24_qc_issue(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; + void *port = (void *)ap->ioaddr.cmd_addr; struct sil24_port_priv *pp = ap->private_data; dma_addr_t paddr = pp->cmd_block_dma + qc->tag * sizeof(*pp->cmd_block); - writel((u32)paddr, pp->port + PORT_CMD_ACTIVATE); + writel((u32)paddr, port + PORT_CMD_ACTIVATE); return 0; } @@ -428,8 +428,7 @@ static void sil24_irq_clear(struct ata_port *ap) static void sil24_reset_controller(struct ata_port *ap) { - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; int cnt; u32 tmp; @@ -480,8 +479,7 @@ static void sil24_eng_timeout(struct ata_port *ap) static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); @@ -509,8 +507,7 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) static inline void sil24_host_intr(struct ata_port *ap) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); - struct sil24_port_priv *pp = ap->private_data; - void *port = pp->port; + void *port = (void *)ap->ioaddr.cmd_addr; u32 slot_stat; slot_stat = readl(port + PORT_SLOT_STAT); @@ -561,7 +558,6 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs * static int sil24_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; - struct sil24_host_priv *hpriv = ap->host_set->private_data; struct sil24_port_priv *pp; struct sil24_cmd_block *cb; size_t cb_size = sizeof(*cb); @@ -579,7 +575,6 @@ static int sil24_port_start(struct ata_port *ap) } memset(cb, 0, cb_size); - pp->port = hpriv->port_base + ap->port_no * PORT_REGS_SIZE; pp->cmd_block = cb; pp->cmd_block_dma = cb_dma; @@ -700,7 +695,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) u32 tmp; int cnt; - probe_ent->port[i].cmd_addr = portu; + probe_ent->port[i].cmd_addr = portu + PORT_PRB; probe_ent->port[i].scr_addr = portu + PORT_SCONTROL; ata_std_ports(&probe_ent->port[i]); From e382eb1dbdb2dec69806a72551bcb4a736142f6d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:13 +0900 Subject: [PATCH 009/101] [PATCH] sil24: fix PORT_CTRL_STAT constants 07_sil24_fix-PORT_CTRL_STAT-constants.patch PORT_CTRL_STAT constants were copied incorrectly from the preview driver. Signed-off-by: Edward Falk sata_sil24.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 547c29a5613b..7a3d50dcd938 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -140,10 +140,10 @@ enum { PORT_CS_DEV_RST = (1 << 1), /* device reset */ PORT_CS_INIT = (1 << 2), /* port initialize */ PORT_CS_IRQ_WOC = (1 << 3), /* interrupt write one to clear */ - PORT_CS_RESUME = (1 << 4), /* port resume */ - PORT_CS_32BIT_ACTV = (1 << 5), /* 32-bit activation */ - PORT_CS_PM_EN = (1 << 6), /* port multiplier enable */ - PORT_CS_RDY = (1 << 7), /* port ready to accept commands */ + PORT_CS_RESUME = (1 << 6), /* port resume */ + PORT_CS_32BIT_ACTV = (1 << 10), /* 32-bit activation */ + PORT_CS_PM_EN = (1 << 13), /* port multiplier enable */ + PORT_CS_RDY = (1 << 31), /* port ready to accept commands */ /* PORT_IRQ_STAT/ENABLE_SET/CLR */ /* bits[11:0] are masked */ From 83bbecc905b3431c60fe282830e09aaaab97b26a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 17 Aug 2005 13:09:18 +0900 Subject: [PATCH 010/101] [PATCH] sil24: add more comments for constants 08_sil24_add-comments-for-constants.patch Add more comments to constants. Signed-off-by: Edward Falk sata_sil24.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 7a3d50dcd938..cb91894471f2 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -107,14 +107,14 @@ enum { PORT_PM = 0x0f80, /* 8 bytes PM * 16 (128 bytes) */ /* 32 bit regs */ - PORT_CTRL_STAT = 0x1000, /* write:ctrl, read:stat */ - PORT_CTRL_CLR = 0x1004, - PORT_IRQ_STAT = 0x1008, - PORT_IRQ_ENABLE_SET = 0x1010, - PORT_IRQ_ENABLE_CLR = 0x1014, + PORT_CTRL_STAT = 0x1000, /* write: ctrl-set, read: stat */ + PORT_CTRL_CLR = 0x1004, /* write: ctrl-clear */ + PORT_IRQ_STAT = 0x1008, /* high: status, low: interrupt */ + PORT_IRQ_ENABLE_SET = 0x1010, /* write: enable-set */ + PORT_IRQ_ENABLE_CLR = 0x1014, /* write: enable-clear */ PORT_ACTIVATE_UPPER_ADDR= 0x101c, - PORT_EXEC_FIFO = 0x1020, - PORT_CMD_ERR = 0x1024, + PORT_EXEC_FIFO = 0x1020, /* command execution fifo */ + PORT_CMD_ERR = 0x1024, /* command error number */ PORT_FIS_CFG = 0x1028, PORT_FIFO_THRES = 0x102c, /* 16 bit regs */ @@ -187,7 +187,7 @@ enum { PORT_CERR_XFR_TGTABRT = 33, /* PSD ecode 01 - target abort */ PORT_CERR_XFR_MSGABRT = 34, /* PSD ecode 10 - master abort */ PORT_CERR_XFR_PCIPERR = 35, /* PSD ecode 11 - PCI prity err during transfer */ - PORT_CERR_SENDSERVICE = 36, /* FIS received whiel sending service */ + PORT_CERR_SENDSERVICE = 36, /* FIS received while sending service */ /* * Other constants From 923f122573851d18a3832ca808269fa2d5046fb1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 13 Sep 2005 13:21:29 +0900 Subject: [PATCH 011/101] [PATCH] sil24: initialization fix sil24 0.20 didn't use to perform (what seems to be) port multiplier initialization and controller reset 0.10 driver does. This makes some sil24 controllers malfunction. This patch adds PM initialization and controller resetting to initilization and bumps version to 0.21. Please refer to the following thread for more information. http://marc.theaimsgroup.com/?l=linux-ide&m=112582819830324&w=2 http://marc.theaimsgroup.com/?l=linux-ide&m=112636045531060&w=2 Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 31 +++++++++++++++++++++++-------- 1 file changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index cb91894471f2..d8a2f5f04e82 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.20" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.21" /* Silicon Image's preview driver was 0.10 */ #define NR_PORTS 4 @@ -426,15 +426,11 @@ static void sil24_irq_clear(struct ata_port *ap) /* unused */ } -static void sil24_reset_controller(struct ata_port *ap) +static int __sil24_reset_controller(void *port) { - void *port = (void *)ap->ioaddr.cmd_addr; int cnt; u32 tmp; - printk(KERN_NOTICE DRV_NAME - " ata%u: resetting controller...\n", ap->id); - /* Reset controller state. Is this correct? */ writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT); readl(port + PORT_CTRL_STAT); /* sync */ @@ -446,9 +442,19 @@ static void sil24_reset_controller(struct ata_port *ap) if (!(tmp & PORT_CS_DEV_RST)) break; } + if (tmp & PORT_CS_DEV_RST) - printk(KERN_ERR DRV_NAME - " ata%u: failed to reset controller\n", ap->id); + return -1; + return 0; +} + +static void sil24_reset_controller(struct ata_port *ap) +{ + printk(KERN_NOTICE DRV_NAME + " ata%u: resetting controller...\n", ap->id); + if (__sil24_reset_controller((void *)ap->ioaddr.cmd_addr)) + printk(KERN_ERR DRV_NAME + " ata%u: failed to reset controller\n", ap->id); } static void sil24_eng_timeout(struct ata_port *ap) @@ -740,6 +746,15 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) /* Clear interrupts */ writel(0x0fff0fff, port + PORT_IRQ_STAT); writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR); + + /* Clear port multiplier enable and resume bits */ + writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR); + + /* Reset itself */ + if (__sil24_reset_controller(port)) + printk(KERN_ERR DRV_NAME + "(%s): failed to reset controller\n", + pci_name(pdev)); } /* Turn on interrupts */ From ee500aabf10323a7e313731b8c0be7c2c6dd27c7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:34:38 +0800 Subject: [PATCH 012/101] [PATCH] libata: indent and whitespace change Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/sata_promise.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..cc68f5706acf 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3586,7 +3586,7 @@ u8 ata_bmdma_status(struct ata_port *ap) void __iomem *mmio = (void __iomem *) ap->ioaddr.bmdma_addr; host_stat = readb(mmio + ATA_DMA_STATUS); } else - host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); + host_stat = inb(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); return host_stat; } diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c index 538ad727bd2e..def7e0d9dacb 100644 --- a/drivers/scsi/sata_promise.c +++ b/drivers/scsi/sata_promise.c @@ -438,11 +438,11 @@ static inline unsigned int pdc_host_intr( struct ata_port *ap, break; default: - ap->stats.idle_irq++; - break; + ap->stats.idle_irq++; + break; } - return handled; + return handled; } static void pdc_irq_clear(struct ata_port *ap) From 14be71f4c5c5ad1e222c5202ee6d234e9c8828b7 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 27 Sep 2005 17:36:35 +0800 Subject: [PATCH 013/101] [PATCH] libata: rename host states Changes: s/PIO_ST_/HSM_ST_/ and s/pio_task_state/hsm_task_state/. Signed-off-by: Albert Lee Signed-off-by: Jeff Garzik --- drivers/scsi/libata-core.c | 76 +++++++++++++++++++------------------- include/linux/libata.h | 20 +++++----- 2 files changed, 48 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index cc68f5706acf..c4fcdc30f18c 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -2425,20 +2425,20 @@ void ata_poll_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) static unsigned long ata_pio_poll(struct ata_port *ap) { u8 status; - unsigned int poll_state = PIO_ST_UNKNOWN; - unsigned int reg_state = PIO_ST_UNKNOWN; - const unsigned int tmout_state = PIO_ST_TMOUT; + unsigned int poll_state = HSM_ST_UNKNOWN; + unsigned int reg_state = HSM_ST_UNKNOWN; + const unsigned int tmout_state = HSM_ST_TMOUT; - switch (ap->pio_task_state) { - case PIO_ST: - case PIO_ST_POLL: - poll_state = PIO_ST_POLL; - reg_state = PIO_ST; + switch (ap->hsm_task_state) { + case HSM_ST: + case HSM_ST_POLL: + poll_state = HSM_ST_POLL; + reg_state = HSM_ST; break; - case PIO_ST_LAST: - case PIO_ST_LAST_POLL: - poll_state = PIO_ST_LAST_POLL; - reg_state = PIO_ST_LAST; + case HSM_ST_LAST: + case HSM_ST_LAST_POLL: + poll_state = HSM_ST_LAST_POLL; + reg_state = HSM_ST_LAST; break; default: BUG(); @@ -2448,14 +2448,14 @@ static unsigned long ata_pio_poll(struct ata_port *ap) status = ata_chk_status(ap); if (status & ATA_BUSY) { if (time_after(jiffies, ap->pio_task_timeout)) { - ap->pio_task_state = tmout_state; + ap->hsm_task_state = tmout_state; return 0; } - ap->pio_task_state = poll_state; + ap->hsm_task_state = poll_state; return ATA_SHORT_PAUSE; } - ap->pio_task_state = reg_state; + ap->hsm_task_state = reg_state; return 0; } @@ -2480,14 +2480,14 @@ static int ata_pio_complete (struct ata_port *ap) * we enter, BSY will be cleared in a chk-status or two. If not, * the drive is probably seeking or something. Snooze for a couple * msecs, then chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { msleep(2); drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 10); if (drv_stat & (ATA_BUSY | ATA_DRQ)) { - ap->pio_task_state = PIO_ST_LAST_POLL; + ap->hsm_task_state = HSM_ST_LAST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return 0; } @@ -2495,14 +2495,14 @@ static int ata_pio_complete (struct ata_port *ap) drv_stat = ata_wait_idle(ap); if (!ata_ok(drv_stat)) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return 0; } qc = ata_qc_from_tag(ap, ap->active_tag); assert(qc != NULL); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat); @@ -2662,7 +2662,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) unsigned char *buf; if (qc->cursect == (qc->nsect - 1)) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; page = sg[qc->cursg].page; offset = sg[qc->cursg].offset + qc->cursg_ofs * ATA_SECT_SIZE; @@ -2712,7 +2712,7 @@ static void __atapi_pio_bytes(struct ata_queued_cmd *qc, unsigned int bytes) unsigned int offset, count; if (qc->curbytes + bytes >= qc->nbytes) - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; next_sg: if (unlikely(qc->cursg >= qc->n_elem)) { @@ -2734,7 +2734,7 @@ next_sg: for (i = 0; i < words; i++) ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write); - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2815,7 +2815,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) err_out: printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n", ap->id, dev->devno); - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; } /** @@ -2837,14 +2837,14 @@ static void ata_pio_block(struct ata_port *ap) * a chk-status or two. If not, the drive is probably seeking * or something. Snooze for a couple msecs, then * chk-status again. If still busy, fall back to - * PIO_ST_POLL state. + * HSM_ST_POLL state. */ status = ata_busy_wait(ap, ATA_BUSY, 5); if (status & ATA_BUSY) { msleep(2); status = ata_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ap->pio_task_state = PIO_ST_POLL; + ap->hsm_task_state = HSM_ST_POLL; ap->pio_task_timeout = jiffies + ATA_TMOUT_PIO; return; } @@ -2856,7 +2856,7 @@ static void ata_pio_block(struct ata_port *ap) if (is_atapi_taskfile(&qc->tf)) { /* no more data to transfer or unsupported ATAPI command */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_LAST; + ap->hsm_task_state = HSM_ST_LAST; return; } @@ -2864,7 +2864,7 @@ static void ata_pio_block(struct ata_port *ap) } else { /* handle BSY=0, DRQ=0 as error */ if ((status & ATA_DRQ) == 0) { - ap->pio_task_state = PIO_ST_ERR; + ap->hsm_task_state = HSM_ST_ERR; return; } @@ -2884,7 +2884,7 @@ static void ata_pio_error(struct ata_port *ap) printk(KERN_WARNING "ata%u: PIO error, drv_stat 0x%x\n", ap->id, drv_stat); - ap->pio_task_state = PIO_ST_IDLE; + ap->hsm_task_state = HSM_ST_IDLE; ata_poll_qc_complete(qc, drv_stat | ATA_ERR); } @@ -2899,25 +2899,25 @@ fsm_start: timeout = 0; qc_completed = 0; - switch (ap->pio_task_state) { - case PIO_ST_IDLE: + switch (ap->hsm_task_state) { + case HSM_ST_IDLE: return; - case PIO_ST: + case HSM_ST: ata_pio_block(ap); break; - case PIO_ST_LAST: + case HSM_ST_LAST: qc_completed = ata_pio_complete(ap); break; - case PIO_ST_POLL: - case PIO_ST_LAST_POLL: + case HSM_ST_POLL: + case HSM_ST_LAST_POLL: timeout = ata_pio_poll(ap); break; - case PIO_ST_TMOUT: - case PIO_ST_ERR: + case HSM_ST_TMOUT: + case HSM_ST_ERR: ata_pio_error(ap); return; } @@ -3360,7 +3360,7 @@ int ata_qc_issue_prot(struct ata_queued_cmd *qc) case ATA_PROT_PIO: /* load tf registers, initiate polling pio */ ata_qc_set_polling(qc); ata_tf_to_host_nolock(ap, &qc->tf); - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); break; @@ -3806,7 +3806,7 @@ static void atapi_packet_task(void *_data) ata_data_xfer(ap, qc->cdb, ap->cdb_len, 1); /* PIO commands are handled by polling */ - ap->pio_task_state = PIO_ST; + ap->hsm_task_state = HSM_ST; queue_work(ata_wq, &ap->pio_task); } diff --git a/include/linux/libata.h b/include/linux/libata.h index ceee1fc42c60..bb2d916bce44 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -156,15 +156,15 @@ enum { ATA_SHIFT_PIO = 11, }; -enum pio_task_states { - PIO_ST_UNKNOWN, - PIO_ST_IDLE, - PIO_ST_POLL, - PIO_ST_TMOUT, - PIO_ST, - PIO_ST_LAST, - PIO_ST_LAST_POLL, - PIO_ST_ERR, +enum hsm_task_states { + HSM_ST_UNKNOWN, + HSM_ST_IDLE, + HSM_ST_POLL, + HSM_ST_TMOUT, + HSM_ST, + HSM_ST_LAST, + HSM_ST_LAST_POLL, + HSM_ST_ERR, }; /* forward declarations */ @@ -319,7 +319,7 @@ struct ata_port { struct work_struct packet_task; struct work_struct pio_task; - unsigned int pio_task_state; + unsigned int hsm_task_state; unsigned long pio_task_timeout; void *private_data; From bfd00722ac230a39bc5234c5f7a514ea6a77996d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Mon, 26 Sep 2005 11:28:47 +0900 Subject: [PATCH 014/101] [PATCH] libata EH document update Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- Documentation/DocBook/libata.tmpl | 356 ++++++++++++++++++++++++++++++ 1 file changed, 356 insertions(+) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index 375ae760dc1e..fcbb58fc0fee 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -413,6 +413,362 @@ and other resources, etc. + + Error handling + + + This chapter describes how errors are handled under libata. + Readers are advised to read SCSI EH + (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first. + + + Origins of commands + + In libata, a command is represented with struct ata_queued_cmd + or qc. qc's are preallocated during port initialization and + repetitively used for command executions. Currently only one + qc is allocated per port but yet-to-be-merged NCQ branch + allocates one for each tag and maps each qc to NCQ tag 1-to-1. + + + libata commands can originate from two sources - libata itself + and SCSI midlayer. libata internal commands are used for + initialization and error handling. All normal blk requests + and commands for SCSI emulation are passed as SCSI commands + through queuecommand callback of SCSI host template. + + + + How commands are issued + + + + Internal commands + + + First, qc is allocated and initialized using + ata_qc_new_init(). Although ata_qc_new_init() doesn't + implement any wait or retry mechanism when qc is not + available, internal commands are currently issued only during + initialization and error recovery, so no other command is + active and allocation is guaranteed to succeed. + + + Once allocated qc's taskfile is initialized for the command to + be executed. qc currently has two mechanisms to notify + completion. One is via qc->complete_fn() callback and the + other is completion qc->waiting. qc->complete_fn() callback + is the asynchronous path used by normal SCSI translated + commands and qc->waiting is the synchronous (issuer sleeps in + process context) path used by internal commands. + + + Once initialization is complete, host_set lock is acquired + and the qc is issued. + + + + + SCSI commands + + + All libata drivers use ata_scsi_queuecmd() as + hostt->queuecommand callback. scmds can either be simulated + or translated. No qc is involved in processing a simulated + scmd. The result is computed right away and the scmd is + completed. + + + For a translated scmd, ata_qc_new_init() is invoked to + allocate a qc and the scmd is translated into the qc. SCSI + midlayer's completion notification function pointer is stored + into qc->scsidone. + + + qc->complete_fn() callback is used for completion + notification. ATA commands use ata_scsi_qc_complete() while + ATAPI commands use atapi_qc_complete(). Both functions end up + calling qc->scsidone to notify upper layer when the qc is + finished. After translation is completed, the qc is issued + with ata_qc_issue(). + + + Note that SCSI midlayer invokes hostt->queuecommand while + holding host_set lock, so all above occur while holding + host_set lock. + + + + + + + + How commands are processed + + Depending on which protocol and which controller are used, + commands are processed differently. For the purpose of + discussion, a controller which uses taskfile interface and all + standard callbacks is assumed. + + + Currently 6 ATA command protocols are used. They can be + sorted into the following four categories according to how + they are processed. + + + + ATA NO DATA or DMA + + + ATA_PROT_NODATA and ATA_PROT_DMA fall into this category. + These types of commands don't require any software + intervention once issued. Device will raise interrupt on + completion. + + + + + ATA PIO + + + ATA_PROT_PIO is in this category. libata currently + implements PIO with polling. ATA_NIEN bit is set to turn + off interrupt and pio_task on ata_wq performs polling and + IO. + + + + + ATAPI NODATA or DMA + + + ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this + category. packet_task is used to poll BSY bit after + issuing PACKET command. Once BSY is turned off by the + device, packet_task transfers CDB and hands off processing + to interrupt handler. + + + + + ATAPI PIO + + + ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set + and, as in ATAPI NODATA or DMA, packet_task submits cdb. + However, after submitting cdb, further processing (data + transfer) is handed off to pio_task. + + + + + + + How commands are completed + + Once issued, all qc's are either completed with + ata_qc_complete() or time out. For commands which are handled + by interrupts, ata_host_intr() invokes ata_qc_complete(), and, + for PIO tasks, pio_task invokes ata_qc_complete(). In error + cases, packet_task may also complete commands. + + + ata_qc_complete() does the following. + + + + + + + DMA memory is unmapped. + + + + + + ATA_QCFLAG_ACTIVE is clared from qc->flags. + + + + + + qc->complete_fn() callback is invoked. If the return value of + the callback is not zero. Completion is short circuited and + ata_qc_complete() returns. + + + + + + __ata_qc_complete() is called, which does + + + + + qc->flags is cleared to zero. + + + + + + ap->active_tag and qc->tag are poisoned. + + + + + + qc->waiting is claread & completed (in that order). + + + + + + qc is deallocated by clearing appropriate bit in ap->qactive. + + + + + + + + + + + So, it basically notifies upper layer and deallocates qc. One + exception is short-circuit path in #3 which is used by + atapi_qc_complete(). + + + For all non-ATAPI commands, whether it fails or not, almost + the same code path is taken and very little error handling + takes place. A qc is completed with success status if it + succeeded, with failed status otherwise. + + + However, failed ATAPI commands require more handling as + REQUEST SENSE is needed to acquire sense data. If an ATAPI + command fails, ata_qc_complete() is invoked with error status, + which in turn invokes atapi_qc_complete() via + qc->complete_fn() callback. + + + This makes atapi_qc_complete() set scmd->result to + SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As + the sense data is empty but scmd->result is CHECK CONDITION, + SCSI midlayer will invoke EH for the scmd, and returning 1 + makes ata_qc_complete() to return without deallocating the qc. + This leads us to ata_scsi_error() with partially completed qc. + + + + + ata_scsi_error() + + ata_scsi_error() is the current hostt->eh_strategy_handler() + for libata. As discussed above, this will be entered in two + cases - timeout and ATAPI error completion. This function + calls low level libata driver's eng_timeout() callback, the + standard callback for which is ata_eng_timeout(). It checks + if a qc is active and calls ata_qc_timeout() on the qc if so. + Actual error handling occurs in ata_qc_timeout(). + + + If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and + completes the qc. Note that as we're currently in EH, we + cannot call scsi_done. As described in SCSI EH doc, a + recovered scmd should be either retried with + scsi_queue_insert() or finished with scsi_finish_command(). + Here, we override qc->scsidone with scsi_finish_command() and + calls ata_qc_complete(). + + + If EH is invoked due to a failed ATAPI qc, the qc here is + completed but not deallocated. The purpose of this + half-completion is to use the qc as place holder to make EH + code reach this place. This is a bit hackish, but it works. + + + Once control reaches here, the qc is deallocated by invoking + __ata_qc_complete() explicitly. Then, internal qc for REQUEST + SENSE is issued. Once sense data is acquired, scmd is + finished by directly invoking scsi_finish_command() on the + scmd. Note that as we already have completed and deallocated + the qc which was associated with the scmd, we don't need + to/cannot call ata_qc_complete() again. + + + + + Problems with the current EH + + + + + + Error representation is too crude. Currently any and all + error conditions are represented with ATA STATUS and ERROR + registers. Errors which aren't ATA device errors are treated + as ATA device errors by setting ATA_ERR bit. Better error + descriptor which can properly represent ATA and other + errors/exceptions is needed. + + + + + + When handling timeouts, no action is taken to make device + forget about the timed out command and ready for new commands. + + + + + + EH handling via ata_scsi_error() is not properly protected + from usual command processing. On EH entrance, the device is + not in quiescent state. Timed out commands may succeed or + fail any time. pio_task and atapi_task may still be running. + + + + + + Too weak error recovery. Devices / controllers causing HSM + mismatch errors and other errors quite often require reset to + return to known state. Also, advanced error handling is + necessary to support features like NCQ and hotplug. + + + + + + ATA errors are directly handled in the interrupt handler and + PIO errors in pio_task. This is problematic for advanced + error handling for the following reasons. + + + First, advanced error handling often requires context and + internal qc execution. + + + Second, even a simple failure (say, CRC error) needs + information gathering and could trigger complex error handling + (say, resetting & reconfiguring). Having multiple code + paths to gather information, enter EH and trigger actions + makes life painful. + + + Third, scattered EH code makes implementing low level drivers + difficult. Low level drivers override libata callbacks. If + EH is scattered over several places, each affected callbacks + should perform its part of error handling. This can be error + prone and painful. + + + + + + + From a1213499b0ef75d8c627b461047805a235c9dd00 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 28 Sep 2005 13:26:47 -0400 Subject: [PATCH 015/101] libata: move EH docs to separate DocBook chapter --- Documentation/DocBook/libata.tmpl | 30 +++++++++++++++--------------- 1 file changed, 15 insertions(+), 15 deletions(-) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index fcbb58fc0fee..b2ec780bcda1 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -413,7 +413,9 @@ and other resources, etc. - + + + Error handling @@ -422,7 +424,7 @@ and other resources, etc. (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first. - Origins of commands + Origins of commands In libata, a command is represented with struct ata_queued_cmd or qc. qc's are preallocated during port initialization and @@ -437,9 +439,9 @@ and other resources, etc. and commands for SCSI emulation are passed as SCSI commands through queuecommand callback of SCSI host template. - + - How commands are issued + How commands are issued @@ -501,9 +503,9 @@ and other resources, etc. - + - How commands are processed + How commands are processed Depending on which protocol and which controller are used, commands are processed differently. For the purpose of @@ -562,9 +564,9 @@ and other resources, etc. - + - How commands are completed + How commands are completed Once issued, all qc's are either completed with ata_qc_complete() or time out. For commands which are handled @@ -660,9 +662,9 @@ and other resources, etc. This leads us to ata_scsi_error() with partially completed qc. - + - ata_scsi_error() + ata_scsi_error() ata_scsi_error() is the current hostt->eh_strategy_handler() for libata. As discussed above, this will be entered in two @@ -697,9 +699,9 @@ and other resources, etc. to/cannot call ata_qc_complete() again. - + - Problems with the current EH + Problems with the current EH @@ -766,9 +768,7 @@ and other resources, etc. - - - + From b4b52db71529bbe46da914eda772fb574914c94d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 26 Sep 2005 12:48:41 +0100 Subject: [PATCH 016/101] [PATCH] ata: re-order speeds sensibly. Signed-off-by: Jeff Garzik --- include/linux/ata.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/include/linux/ata.h b/include/linux/ata.h index 85169ea9eb01..ecb7346d0c16 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -147,14 +147,14 @@ enum { XFER_MW_DMA_2 = 0x22, XFER_MW_DMA_1 = 0x21, XFER_MW_DMA_0 = 0x20, + XFER_SW_DMA_2 = 0x12, + XFER_SW_DMA_1 = 0x11, + XFER_SW_DMA_0 = 0x10, XFER_PIO_4 = 0x0C, XFER_PIO_3 = 0x0B, XFER_PIO_2 = 0x0A, XFER_PIO_1 = 0x09, XFER_PIO_0 = 0x08, - XFER_SW_DMA_2 = 0x12, - XFER_SW_DMA_1 = 0x11, - XFER_SW_DMA_0 = 0x10, XFER_PIO_SLOW = 0x00, /* ATAPI stuff */ From d70ed6075f15bdbb0548d162394bf10332769c88 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Wed, 28 Sep 2005 19:56:57 -0700 Subject: [PATCH 017/101] [IPoIB] Rename IPoIB's path_lookup() to avoid name clashes Rename IPoIB driver's path_lookup() to ipoib_path_lookup() to avoid a clashes with the kernel global path_lookup(). We don't hit this with the current kernel source, but some external patches seem to trigger this, and it's cleaner to avoid clashing with global names anyway. Signed-off-by: Roland Dreier refs/heads/for-linus --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 704f48e0b6a7..6c5bf07489f4 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -474,7 +474,7 @@ err: spin_unlock(&priv->lock); } -static void path_lookup(struct sk_buff *skb, struct net_device *dev) +static void ipoib_path_lookup(struct sk_buff *skb, struct net_device *dev) { struct ipoib_dev_priv *priv = netdev_priv(skb->dev); @@ -569,7 +569,7 @@ static int ipoib_start_xmit(struct sk_buff *skb, struct net_device *dev) if (skb->dst && skb->dst->neighbour) { if (unlikely(!*to_ipoib_neigh(skb->dst->neighbour))) { - path_lookup(skb, dev); + ipoib_path_lookup(skb, dev); goto out; } From aba7a22f291c13448177b28e0e3d01260ed04fbe Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Fri, 30 Sep 2005 13:55:50 -0700 Subject: [PATCH 018/101] [IB] mthca: Fix memory leak on device close Remember to free the multicast group context memory table. Signed-off-by: Michael S. Tsirkin Signed-off-by: Roland Dreier --- drivers/infiniband/hw/mthca/mthca_main.c | 45 +++++++++++------------- 1 file changed, 21 insertions(+), 24 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index ffbcd40418d5..23a3f56c7899 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -503,6 +503,25 @@ err_free_aux: return err; } +static void mthca_free_icms(struct mthca_dev *mdev) +{ + u8 status; + + mthca_free_icm_table(mdev, mdev->mcg_table.table); + if (mdev->mthca_flags & MTHCA_FLAG_SRQ) + mthca_free_icm_table(mdev, mdev->srq_table.table); + mthca_free_icm_table(mdev, mdev->cq_table.table); + mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); + mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); + mthca_free_icm_table(mdev, mdev->qp_table.qp_table); + mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); + mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); + mthca_unmap_eq_icm(mdev); + + mthca_UNMAP_ICM_AUX(mdev, &status); + mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); +} + static int __devinit mthca_init_arbel(struct mthca_dev *mdev) { struct mthca_dev_lim dev_lim; @@ -580,18 +599,7 @@ static int __devinit mthca_init_arbel(struct mthca_dev *mdev) return 0; err_free_icm: - if (mdev->mthca_flags & MTHCA_FLAG_SRQ) - mthca_free_icm_table(mdev, mdev->srq_table.table); - mthca_free_icm_table(mdev, mdev->cq_table.table); - mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); - mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); - mthca_free_icm_table(mdev, mdev->qp_table.qp_table); - mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); - mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); - mthca_unmap_eq_icm(mdev); - - mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icms(mdev); err_stop_fw: mthca_UNMAP_FA(mdev, &status); @@ -611,18 +619,7 @@ static void mthca_close_hca(struct mthca_dev *mdev) mthca_CLOSE_HCA(mdev, 0, &status); if (mthca_is_memfree(mdev)) { - if (mdev->mthca_flags & MTHCA_FLAG_SRQ) - mthca_free_icm_table(mdev, mdev->srq_table.table); - mthca_free_icm_table(mdev, mdev->cq_table.table); - mthca_free_icm_table(mdev, mdev->qp_table.rdb_table); - mthca_free_icm_table(mdev, mdev->qp_table.eqp_table); - mthca_free_icm_table(mdev, mdev->qp_table.qp_table); - mthca_free_icm_table(mdev, mdev->mr_table.mpt_table); - mthca_free_icm_table(mdev, mdev->mr_table.mtt_table); - mthca_unmap_eq_icm(mdev); - - mthca_UNMAP_ICM_AUX(mdev, &status); - mthca_free_icm(mdev, mdev->fw.arbel.aux_icm); + mthca_free_icms(mdev); mthca_UNMAP_FA(mdev, &status); mthca_free_icm(mdev, mdev->fw.arbel.fw_icm); From 644dd0cc494702ecd0698f467de113ace9593888 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 3 Oct 2005 15:55:19 -0400 Subject: [PATCH 019/101] [libata] improve device scan Replace SCSI's legacy "bang at the door" method of probing with one directly controlled by the underlying ATA transport layer. We now only call scsi_scan_target() for devices we find, rather than probing every possible channel/id within a certain range. --- drivers/scsi/libata-core.c | 2 +- drivers/scsi/libata-scsi.c | 12 ++++++++++++ drivers/scsi/libata.h | 1 + 3 files changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index e5b01997117a..902c76364af7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4113,7 +4113,7 @@ int ata_device_add(struct ata_probe_ent *ent) for (i = 0; i < count; i++) { struct ata_port *ap = host_set->ports[i]; - scsi_scan_host(ap->host); + ata_scsi_scan_host(ap); } dev_set_drvdata(dev, host_set); diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 104fd9a63e73..4fc0134d4272 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1678,3 +1678,15 @@ void ata_scsi_simulate(u16 *id, } } +void ata_scsi_scan_host(struct ata_port *ap) +{ + unsigned int i; + + if (ap->flags & ATA_FLAG_PORT_DISABLED) + return; + + for (i = 0; i < ATA_MAX_DEVICES; i++) + if (ata_dev_present(&ap->device[i])) + scsi_scan_target(&ap->host->shost_gendev, 0, i, ~0, 0); +} + diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index d608b3a0f6fe..c7a1fa1c9abc 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -51,6 +51,7 @@ extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); extern unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf, From 3115624eda34d0f4e673fc6bcea36b7ad701ee33 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 3 Oct 2005 17:37:02 -0700 Subject: [PATCH 020/101] [SPARC]: "extern inline" doesn't make much sense. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- arch/sparc/kernel/time.c | 2 +- arch/sparc/mm/srmmu.c | 2 +- include/asm-sparc/btfixup.h | 12 ++++++------ include/asm-sparc/cache.h | 18 +++++++++--------- include/asm-sparc/cypress.h | 8 ++++---- include/asm-sparc/delay.h | 2 +- include/asm-sparc/dma.h | 2 +- include/asm-sparc/iommu.h | 4 ++-- include/asm-sparc/kdebug.h | 2 +- include/asm-sparc/mbus.h | 4 ++-- include/asm-sparc/msi.h | 2 +- include/asm-sparc/mxcc.h | 8 ++++---- include/asm-sparc/obio.h | 30 +++++++++++++++--------------- include/asm-sparc/pci.h | 6 +++--- include/asm-sparc/pgtable.h | 28 ++++++++++++++-------------- include/asm-sparc/pgtsrmmu.h | 30 +++++++++++++++--------------- include/asm-sparc/processor.h | 2 +- include/asm-sparc/psr.h | 6 +++--- include/asm-sparc/sbi.h | 10 +++++----- include/asm-sparc/sbus.h | 6 +++--- include/asm-sparc/smp.h | 26 +++++++++++++------------- include/asm-sparc/smpprim.h | 8 ++++---- include/asm-sparc/spinlock.h | 10 +++++----- include/asm-sparc/system.h | 2 +- include/asm-sparc/traps.h | 2 +- 25 files changed, 116 insertions(+), 116 deletions(-) diff --git a/arch/sparc/kernel/time.c b/arch/sparc/kernel/time.c index bc015e980341..279a62627c10 100644 --- a/arch/sparc/kernel/time.c +++ b/arch/sparc/kernel/time.c @@ -457,7 +457,7 @@ void __init time_init(void) sbus_time_init(); } -extern __inline__ unsigned long do_gettimeoffset(void) +static inline unsigned long do_gettimeoffset(void) { return (*master_l10_counter >> 10) & 0x1fffff; } diff --git a/arch/sparc/mm/srmmu.c b/arch/sparc/mm/srmmu.c index c89a803cbc20..c664b962987c 100644 --- a/arch/sparc/mm/srmmu.c +++ b/arch/sparc/mm/srmmu.c @@ -260,7 +260,7 @@ static inline pte_t srmmu_pte_modify(pte_t pte, pgprot_t newprot) { return __pte((pte_val(pte) & SRMMU_CHG_MASK) | pgprot_val(newprot)); } /* to find an entry in a top-level page table... */ -extern inline pgd_t *srmmu_pgd_offset(struct mm_struct * mm, unsigned long address) +static inline pgd_t *srmmu_pgd_offset(struct mm_struct * mm, unsigned long address) { return mm->pgd + (address >> SRMMU_PGDIR_SHIFT); } /* Find an entry in the second-level page table.. */ diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h index b84c96c89581..6b29503256fd 100644 --- a/include/asm-sparc/btfixup.h +++ b/include/asm-sparc/btfixup.h @@ -51,7 +51,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); #define BTFIXUPDEF_SIMM13(__name) \ extern unsigned int ___sf_##__name(void) __attribute_const__; \ extern unsigned ___ss_##__name[2]; \ - extern __inline__ unsigned int ___sf_##__name(void) { \ + static inline unsigned int ___sf_##__name(void) { \ unsigned int ret; \ __asm__ ("or %%g0, ___s_" #__name ", %0" : "=r"(ret)); \ return ret; \ @@ -59,7 +59,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); #define BTFIXUPDEF_SIMM13_INIT(__name,__val) \ extern unsigned int ___sf_##__name(void) __attribute_const__; \ extern unsigned ___ss_##__name[2]; \ - extern __inline__ unsigned int ___sf_##__name(void) { \ + static inline unsigned int ___sf_##__name(void) { \ unsigned int ret; \ __asm__ ("or %%g0, ___s_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ return ret; \ @@ -73,7 +73,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); #define BTFIXUPDEF_HALF(__name) \ extern unsigned int ___af_##__name(void) __attribute_const__; \ extern unsigned ___as_##__name[2]; \ - extern __inline__ unsigned int ___af_##__name(void) { \ + static inline unsigned int ___af_##__name(void) { \ unsigned int ret; \ __asm__ ("or %%g0, ___a_" #__name ", %0" : "=r"(ret)); \ return ret; \ @@ -81,7 +81,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); #define BTFIXUPDEF_HALF_INIT(__name,__val) \ extern unsigned int ___af_##__name(void) __attribute_const__; \ extern unsigned ___as_##__name[2]; \ - extern __inline__ unsigned int ___af_##__name(void) { \ + static inline unsigned int ___af_##__name(void) { \ unsigned int ret; \ __asm__ ("or %%g0, ___a_" #__name "__btset_" #__val ", %0" : "=r"(ret));\ return ret; \ @@ -92,7 +92,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); #define BTFIXUPDEF_SETHI(__name) \ extern unsigned int ___hf_##__name(void) __attribute_const__; \ extern unsigned ___hs_##__name[2]; \ - extern __inline__ unsigned int ___hf_##__name(void) { \ + static inline unsigned int ___hf_##__name(void) { \ unsigned int ret; \ __asm__ ("sethi %%hi(___h_" #__name "), %0" : "=r"(ret)); \ return ret; \ @@ -100,7 +100,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); #define BTFIXUPDEF_SETHI_INIT(__name,__val) \ extern unsigned int ___hf_##__name(void) __attribute_const__; \ extern unsigned ___hs_##__name[2]; \ - extern __inline__ unsigned int ___hf_##__name(void) { \ + static inline unsigned int ___hf_##__name(void) { \ unsigned int ret; \ __asm__ ("sethi %%hi(___h_" #__name "__btset_" #__val "), %0" : \ "=r"(ret)); \ diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h index e6316fd7e1a4..a10522cb21b7 100644 --- a/include/asm-sparc/cache.h +++ b/include/asm-sparc/cache.h @@ -27,7 +27,7 @@ */ /* First, cache-tag access. */ -extern __inline__ unsigned int get_icache_tag(int setnum, int tagnum) +static inline unsigned int get_icache_tag(int setnum, int tagnum) { unsigned int vaddr, retval; @@ -38,7 +38,7 @@ extern __inline__ unsigned int get_icache_tag(int setnum, int tagnum) return retval; } -extern __inline__ void put_icache_tag(int setnum, int tagnum, unsigned int entry) +static inline void put_icache_tag(int setnum, int tagnum, unsigned int entry) { unsigned int vaddr; @@ -51,7 +51,7 @@ extern __inline__ void put_icache_tag(int setnum, int tagnum, unsigned int entry /* Second cache-data access. The data is returned two-32bit quantities * at a time. */ -extern __inline__ void get_icache_data(int setnum, int tagnum, int subblock, +static inline void get_icache_data(int setnum, int tagnum, int subblock, unsigned int *data) { unsigned int value1, value2, vaddr; @@ -67,7 +67,7 @@ extern __inline__ void get_icache_data(int setnum, int tagnum, int subblock, data[0] = value1; data[1] = value2; } -extern __inline__ void put_icache_data(int setnum, int tagnum, int subblock, +static inline void put_icache_data(int setnum, int tagnum, int subblock, unsigned int *data) { unsigned int value1, value2, vaddr; @@ -92,35 +92,35 @@ extern __inline__ void put_icache_data(int setnum, int tagnum, int subblock, */ /* Flushes which clear out both the on-chip and external caches */ -extern __inline__ void flush_ei_page(unsigned int addr) +static inline void flush_ei_page(unsigned int addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_PAGE) : "memory"); } -extern __inline__ void flush_ei_seg(unsigned int addr) +static inline void flush_ei_seg(unsigned int addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_SEG) : "memory"); } -extern __inline__ void flush_ei_region(unsigned int addr) +static inline void flush_ei_region(unsigned int addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_REGION) : "memory"); } -extern __inline__ void flush_ei_ctx(unsigned int addr) +static inline void flush_ei_ctx(unsigned int addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_CTX) : "memory"); } -extern __inline__ void flush_ei_user(unsigned int addr) +static inline void flush_ei_user(unsigned int addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_USER) : diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h index fc92fc839c3f..99599533efbc 100644 --- a/include/asm-sparc/cypress.h +++ b/include/asm-sparc/cypress.h @@ -48,25 +48,25 @@ #define CYPRESS_NFAULT 0x00000002 #define CYPRESS_MENABLE 0x00000001 -extern __inline__ void cypress_flush_page(unsigned long page) +static inline void cypress_flush_page(unsigned long page) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (page), "i" (ASI_M_FLUSH_PAGE)); } -extern __inline__ void cypress_flush_segment(unsigned long addr) +static inline void cypress_flush_segment(unsigned long addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_SEG)); } -extern __inline__ void cypress_flush_region(unsigned long addr) +static inline void cypress_flush_region(unsigned long addr) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : : "r" (addr), "i" (ASI_M_FLUSH_REGION)); } -extern __inline__ void cypress_flush_context(void) +static inline void cypress_flush_context(void) { __asm__ __volatile__("sta %%g0, [%%g0] %0\n\t" : : "i" (ASI_M_FLUSH_CTX)); diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h index 6edf2cbb246b..7ec8e9f7ad4f 100644 --- a/include/asm-sparc/delay.h +++ b/include/asm-sparc/delay.h @@ -10,7 +10,7 @@ #include #include -extern __inline__ void __delay(unsigned long loops) +static inline void __delay(unsigned long loops) { __asm__ __volatile__("cmp %0, 0\n\t" "1: bne 1b\n\t" diff --git a/include/asm-sparc/dma.h b/include/asm-sparc/dma.h index 07e6368a2521..8ec206aa5f2e 100644 --- a/include/asm-sparc/dma.h +++ b/include/asm-sparc/dma.h @@ -198,7 +198,7 @@ extern void dvma_init(struct sbus_bus *); /* Pause until counter runs out or BIT isn't set in the DMA condition * register. */ -extern __inline__ void sparc_dma_pause(struct sparc_dma_registers *regs, +static inline void sparc_dma_pause(struct sparc_dma_registers *regs, unsigned long bit) { int ctr = 50000; /* Let's find some bugs ;) */ diff --git a/include/asm-sparc/iommu.h b/include/asm-sparc/iommu.h index 8171362d56b9..70c589c05a10 100644 --- a/include/asm-sparc/iommu.h +++ b/include/asm-sparc/iommu.h @@ -108,12 +108,12 @@ struct iommu_struct { struct bit_map usemap; }; -extern __inline__ void iommu_invalidate(struct iommu_regs *regs) +static inline void iommu_invalidate(struct iommu_regs *regs) { regs->tlbflush = 0; } -extern __inline__ void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba) +static inline void iommu_invalidate_page(struct iommu_regs *regs, unsigned long ba) { regs->pageflush = (ba & PAGE_MASK); } diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h index 3ea4916635ee..fba92485fdba 100644 --- a/include/asm-sparc/kdebug.h +++ b/include/asm-sparc/kdebug.h @@ -46,7 +46,7 @@ struct kernel_debug { extern struct kernel_debug *linux_dbvec; /* Use this macro in C-code to enter the debugger. */ -extern __inline__ void sp_enter_debugger(void) +static inline void sp_enter_debugger(void) { __asm__ __volatile__("jmpl %0, %%o7\n\t" "nop\n\t" : : diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h index 5f2749015342..ecacdf4075d7 100644 --- a/include/asm-sparc/mbus.h +++ b/include/asm-sparc/mbus.h @@ -83,7 +83,7 @@ extern unsigned int hwbug_bitmask; */ #define TBR_ID_SHIFT 20 -extern __inline__ int get_cpuid(void) +static inline int get_cpuid(void) { register int retval; __asm__ __volatile__("rd %%tbr, %0\n\t" @@ -93,7 +93,7 @@ extern __inline__ int get_cpuid(void) return (retval & 3); } -extern __inline__ int get_modid(void) +static inline int get_modid(void) { return (get_cpuid() | 0x8); } diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h index b69543dd3b46..ff72cbd946a4 100644 --- a/include/asm-sparc/msi.h +++ b/include/asm-sparc/msi.h @@ -19,7 +19,7 @@ #define MSI_ASYNC_MODE 0x80000000 /* Operate the MSI asynchronously */ -extern __inline__ void msi_set_sync(void) +static inline void msi_set_sync(void) { __asm__ __volatile__ ("lda [%0] %1, %%g3\n\t" "andn %%g3, %2, %%g3\n\t" diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h index 60ef9d6fe7bc..128fe9708135 100644 --- a/include/asm-sparc/mxcc.h +++ b/include/asm-sparc/mxcc.h @@ -85,7 +85,7 @@ #ifndef __ASSEMBLY__ -extern __inline__ void mxcc_set_stream_src(unsigned long *paddr) +static inline void mxcc_set_stream_src(unsigned long *paddr) { unsigned long data0 = paddr[0]; unsigned long data1 = paddr[1]; @@ -98,7 +98,7 @@ extern __inline__ void mxcc_set_stream_src(unsigned long *paddr) "i" (ASI_M_MXCC) : "g2", "g3"); } -extern __inline__ void mxcc_set_stream_dst(unsigned long *paddr) +static inline void mxcc_set_stream_dst(unsigned long *paddr) { unsigned long data0 = paddr[0]; unsigned long data1 = paddr[1]; @@ -111,7 +111,7 @@ extern __inline__ void mxcc_set_stream_dst(unsigned long *paddr) "i" (ASI_M_MXCC) : "g2", "g3"); } -extern __inline__ unsigned long mxcc_get_creg(void) +static inline unsigned long mxcc_get_creg(void) { unsigned long mxcc_control; @@ -125,7 +125,7 @@ extern __inline__ unsigned long mxcc_get_creg(void) return mxcc_control; } -extern __inline__ void mxcc_set_creg(unsigned long mxcc_control) +static inline void mxcc_set_creg(unsigned long mxcc_control) { __asm__ __volatile__("sta %0, [%1] %2\n\t" : : "r" (mxcc_control), "r" (MXCC_CREG), diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h index 62e1d77965f3..47854a2a12cf 100644 --- a/include/asm-sparc/obio.h +++ b/include/asm-sparc/obio.h @@ -98,7 +98,7 @@ #ifndef __ASSEMBLY__ -extern __inline__ int bw_get_intr_mask(int sbus_level) +static inline int bw_get_intr_mask(int sbus_level) { int mask; @@ -109,7 +109,7 @@ extern __inline__ int bw_get_intr_mask(int sbus_level) return mask; } -extern __inline__ void bw_clear_intr_mask(int sbus_level, int mask) +static inline void bw_clear_intr_mask(int sbus_level, int mask) { __asm__ __volatile__ ("stha %0, [%1] %2" : : "r" (mask), @@ -117,7 +117,7 @@ extern __inline__ void bw_clear_intr_mask(int sbus_level, int mask) "i" (ASI_M_CTL)); } -extern __inline__ unsigned bw_get_prof_limit(int cpu) +static inline unsigned bw_get_prof_limit(int cpu) { unsigned limit; @@ -128,7 +128,7 @@ extern __inline__ unsigned bw_get_prof_limit(int cpu) return limit; } -extern __inline__ void bw_set_prof_limit(int cpu, unsigned limit) +static inline void bw_set_prof_limit(int cpu, unsigned limit) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (limit), @@ -136,7 +136,7 @@ extern __inline__ void bw_set_prof_limit(int cpu, unsigned limit) "i" (ASI_M_CTL)); } -extern __inline__ unsigned bw_get_ctrl(int cpu) +static inline unsigned bw_get_ctrl(int cpu) { unsigned ctrl; @@ -147,7 +147,7 @@ extern __inline__ unsigned bw_get_ctrl(int cpu) return ctrl; } -extern __inline__ void bw_set_ctrl(int cpu, unsigned ctrl) +static inline void bw_set_ctrl(int cpu, unsigned ctrl) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (ctrl), @@ -157,7 +157,7 @@ extern __inline__ void bw_set_ctrl(int cpu, unsigned ctrl) extern unsigned char cpu_leds[32]; -extern __inline__ void show_leds(int cpuid) +static inline void show_leds(int cpuid) { cpuid &= 0x1e; __asm__ __volatile__ ("stba %0, [%1] %2" : : @@ -166,7 +166,7 @@ extern __inline__ void show_leds(int cpuid) "i" (ASI_M_CTL)); } -extern __inline__ unsigned cc_get_ipen(void) +static inline unsigned cc_get_ipen(void) { unsigned pending; @@ -177,7 +177,7 @@ extern __inline__ unsigned cc_get_ipen(void) return pending; } -extern __inline__ void cc_set_iclr(unsigned clear) +static inline void cc_set_iclr(unsigned clear) { __asm__ __volatile__ ("stha %0, [%1] %2" : : "r" (clear), @@ -185,7 +185,7 @@ extern __inline__ void cc_set_iclr(unsigned clear) "i" (ASI_M_MXCC)); } -extern __inline__ unsigned cc_get_imsk(void) +static inline unsigned cc_get_imsk(void) { unsigned mask; @@ -196,7 +196,7 @@ extern __inline__ unsigned cc_get_imsk(void) return mask; } -extern __inline__ void cc_set_imsk(unsigned mask) +static inline void cc_set_imsk(unsigned mask) { __asm__ __volatile__ ("stha %0, [%1] %2" : : "r" (mask), @@ -204,7 +204,7 @@ extern __inline__ void cc_set_imsk(unsigned mask) "i" (ASI_M_MXCC)); } -extern __inline__ unsigned cc_get_imsk_other(int cpuid) +static inline unsigned cc_get_imsk_other(int cpuid) { unsigned mask; @@ -215,7 +215,7 @@ extern __inline__ unsigned cc_get_imsk_other(int cpuid) return mask; } -extern __inline__ void cc_set_imsk_other(int cpuid, unsigned mask) +static inline void cc_set_imsk_other(int cpuid, unsigned mask) { __asm__ __volatile__ ("stha %0, [%1] %2" : : "r" (mask), @@ -223,7 +223,7 @@ extern __inline__ void cc_set_imsk_other(int cpuid, unsigned mask) "i" (ASI_M_CTL)); } -extern __inline__ void cc_set_igen(unsigned gen) +static inline void cc_set_igen(unsigned gen) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (gen), @@ -239,7 +239,7 @@ extern __inline__ void cc_set_igen(unsigned gen) #define IGEN_MESSAGE(bcast, devid, sid, levels) \ (((bcast) << 31) | ((devid) << 23) | ((sid) << 15) | (levels)) -extern __inline__ void sun4d_send_ipi(int cpu, int level) +static inline void sun4d_send_ipi(int cpu, int level) { cc_set_igen(IGEN_MESSAGE(0, cpu << 3, 6 + ((level >> 1) & 7), 1 << (level - 1))); } diff --git a/include/asm-sparc/pci.h b/include/asm-sparc/pci.h index 97052baf90c1..38644742f011 100644 --- a/include/asm-sparc/pci.h +++ b/include/asm-sparc/pci.h @@ -15,12 +15,12 @@ #define PCI_IRQ_NONE 0xffffffff -extern inline void pcibios_set_master(struct pci_dev *dev) +static inline void pcibios_set_master(struct pci_dev *dev) { /* No special bus mastering setup handling */ } -extern inline void pcibios_penalize_isa_irq(int irq, int active) +static inline void pcibios_penalize_isa_irq(int irq, int active) { /* We don't do dynamic PCI IRQ allocation */ } @@ -137,7 +137,7 @@ extern void pci_dma_sync_sg_for_device(struct pci_dev *hwdev, struct scatterlist * only drive the low 24-bits during PCI bus mastering, then * you would pass 0x00ffffff as the mask to this function. */ -extern inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) +static inline int pci_dma_supported(struct pci_dev *hwdev, u64 mask) { return 1; } diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h index 8395ad2f1c09..ae883f295f1f 100644 --- a/include/asm-sparc/pgtable.h +++ b/include/asm-sparc/pgtable.h @@ -154,7 +154,7 @@ BTFIXUPDEF_CALL_CONST(int, pte_present, pte_t) BTFIXUPDEF_CALL(void, pte_clear, pte_t *) BTFIXUPDEF_CALL(int, pte_read, pte_t) -extern __inline__ int pte_none(pte_t pte) +static inline int pte_none(pte_t pte) { return !(pte_val(pte) & ~BTFIXUP_SETHI(none_mask)); } @@ -167,7 +167,7 @@ BTFIXUPDEF_CALL_CONST(int, pmd_bad, pmd_t) BTFIXUPDEF_CALL_CONST(int, pmd_present, pmd_t) BTFIXUPDEF_CALL(void, pmd_clear, pmd_t *) -extern __inline__ int pmd_none(pmd_t pmd) +static inline int pmd_none(pmd_t pmd) { return !(pmd_val(pmd) & ~BTFIXUP_SETHI(none_mask)); } @@ -195,19 +195,19 @@ BTFIXUPDEF_HALF(pte_dirtyi) BTFIXUPDEF_HALF(pte_youngi) extern int pte_write(pte_t pte) __attribute_const__; -extern __inline__ int pte_write(pte_t pte) +static inline int pte_write(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_writei); } extern int pte_dirty(pte_t pte) __attribute_const__; -extern __inline__ int pte_dirty(pte_t pte) +static inline int pte_dirty(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi); } extern int pte_young(pte_t pte) __attribute_const__; -extern __inline__ int pte_young(pte_t pte) +static inline int pte_young(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_youngi); } @@ -218,7 +218,7 @@ extern __inline__ int pte_young(pte_t pte) BTFIXUPDEF_HALF(pte_filei) extern int pte_file(pte_t pte) __attribute_const__; -extern __inline__ int pte_file(pte_t pte) +static inline int pte_file(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_filei); } @@ -230,19 +230,19 @@ BTFIXUPDEF_HALF(pte_mkcleani) BTFIXUPDEF_HALF(pte_mkoldi) extern pte_t pte_wrprotect(pte_t pte) __attribute_const__; -extern __inline__ pte_t pte_wrprotect(pte_t pte) +static inline pte_t pte_wrprotect(pte_t pte) { return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti)); } extern pte_t pte_mkclean(pte_t pte) __attribute_const__; -extern __inline__ pte_t pte_mkclean(pte_t pte) +static inline pte_t pte_mkclean(pte_t pte) { return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani)); } extern pte_t pte_mkold(pte_t pte) __attribute_const__; -extern __inline__ pte_t pte_mkold(pte_t pte) +static inline pte_t pte_mkold(pte_t pte) { return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi)); } @@ -279,7 +279,7 @@ BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int) BTFIXUPDEF_INT(pte_modify_mask) extern pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__; -extern __inline__ pte_t pte_modify(pte_t pte, pgprot_t newprot) +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) | pgprot_val(newprot)); @@ -386,13 +386,13 @@ extern struct ctx_list ctx_used; /* Head of used contexts list */ #define NO_CONTEXT -1 -extern __inline__ void remove_from_ctx_list(struct ctx_list *entry) +static inline void remove_from_ctx_list(struct ctx_list *entry) { entry->next->prev = entry->prev; entry->prev->next = entry->next; } -extern __inline__ void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry) +static inline void add_to_ctx_list(struct ctx_list *head, struct ctx_list *entry) { entry->next = head; (entry->prev = head->prev)->next = entry; @@ -401,7 +401,7 @@ extern __inline__ void add_to_ctx_list(struct ctx_list *head, struct ctx_list *e #define add_to_free_ctxlist(entry) add_to_ctx_list(&ctx_free, entry) #define add_to_used_ctxlist(entry) add_to_ctx_list(&ctx_used, entry) -extern __inline__ unsigned long +static inline unsigned long __get_phys (unsigned long addr) { switch (sparc_cpu_model){ @@ -416,7 +416,7 @@ __get_phys (unsigned long addr) } } -extern __inline__ int +static inline int __get_iospace (unsigned long addr) { switch (sparc_cpu_model){ diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h index ee3b9d93187c..edeb9811e728 100644 --- a/include/asm-sparc/pgtsrmmu.h +++ b/include/asm-sparc/pgtsrmmu.h @@ -148,7 +148,7 @@ extern void *srmmu_nocache_pool; #define __nocache_fix(VADDR) __va(__nocache_pa(VADDR)) /* Accessing the MMU control register. */ -extern __inline__ unsigned int srmmu_get_mmureg(void) +static inline unsigned int srmmu_get_mmureg(void) { unsigned int retval; __asm__ __volatile__("lda [%%g0] %1, %0\n\t" : @@ -157,14 +157,14 @@ extern __inline__ unsigned int srmmu_get_mmureg(void) return retval; } -extern __inline__ void srmmu_set_mmureg(unsigned long regval) +static inline void srmmu_set_mmureg(unsigned long regval) { __asm__ __volatile__("sta %0, [%%g0] %1\n\t" : : "r" (regval), "i" (ASI_M_MMUREGS) : "memory"); } -extern __inline__ void srmmu_set_ctable_ptr(unsigned long paddr) +static inline void srmmu_set_ctable_ptr(unsigned long paddr) { paddr = ((paddr >> 4) & SRMMU_CTX_PMASK); __asm__ __volatile__("sta %0, [%1] %2\n\t" : : @@ -173,7 +173,7 @@ extern __inline__ void srmmu_set_ctable_ptr(unsigned long paddr) "memory"); } -extern __inline__ unsigned long srmmu_get_ctable_ptr(void) +static inline unsigned long srmmu_get_ctable_ptr(void) { unsigned int retval; @@ -184,14 +184,14 @@ extern __inline__ unsigned long srmmu_get_ctable_ptr(void) return (retval & SRMMU_CTX_PMASK) << 4; } -extern __inline__ void srmmu_set_context(int context) +static inline void srmmu_set_context(int context) { __asm__ __volatile__("sta %0, [%1] %2\n\t" : : "r" (context), "r" (SRMMU_CTX_REG), "i" (ASI_M_MMUREGS) : "memory"); } -extern __inline__ int srmmu_get_context(void) +static inline int srmmu_get_context(void) { register int retval; __asm__ __volatile__("lda [%1] %2, %0\n\t" : @@ -201,7 +201,7 @@ extern __inline__ int srmmu_get_context(void) return retval; } -extern __inline__ unsigned int srmmu_get_fstatus(void) +static inline unsigned int srmmu_get_fstatus(void) { unsigned int retval; @@ -211,7 +211,7 @@ extern __inline__ unsigned int srmmu_get_fstatus(void) return retval; } -extern __inline__ unsigned int srmmu_get_faddr(void) +static inline unsigned int srmmu_get_faddr(void) { unsigned int retval; @@ -222,7 +222,7 @@ extern __inline__ unsigned int srmmu_get_faddr(void) } /* This is guaranteed on all SRMMU's. */ -extern __inline__ void srmmu_flush_whole_tlb(void) +static inline void srmmu_flush_whole_tlb(void) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : "r" (0x400), /* Flush entire TLB!! */ @@ -231,7 +231,7 @@ extern __inline__ void srmmu_flush_whole_tlb(void) } /* These flush types are not available on all chips... */ -extern __inline__ void srmmu_flush_tlb_ctx(void) +static inline void srmmu_flush_tlb_ctx(void) { __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : "r" (0x300), /* Flush TLB ctx.. */ @@ -239,7 +239,7 @@ extern __inline__ void srmmu_flush_tlb_ctx(void) } -extern __inline__ void srmmu_flush_tlb_region(unsigned long addr) +static inline void srmmu_flush_tlb_region(unsigned long addr) { addr &= SRMMU_PGDIR_MASK; __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : @@ -249,7 +249,7 @@ extern __inline__ void srmmu_flush_tlb_region(unsigned long addr) } -extern __inline__ void srmmu_flush_tlb_segment(unsigned long addr) +static inline void srmmu_flush_tlb_segment(unsigned long addr) { addr &= SRMMU_REAL_PMD_MASK; __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : @@ -258,7 +258,7 @@ extern __inline__ void srmmu_flush_tlb_segment(unsigned long addr) } -extern __inline__ void srmmu_flush_tlb_page(unsigned long page) +static inline void srmmu_flush_tlb_page(unsigned long page) { page &= PAGE_MASK; __asm__ __volatile__("sta %%g0, [%0] %1\n\t": : @@ -267,7 +267,7 @@ extern __inline__ void srmmu_flush_tlb_page(unsigned long page) } -extern __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr) +static inline unsigned long srmmu_hwprobe(unsigned long vaddr) { unsigned long retval; @@ -279,7 +279,7 @@ extern __inline__ unsigned long srmmu_hwprobe(unsigned long vaddr) return retval; } -extern __inline__ int +static inline int srmmu_get_pte (unsigned long addr) { register unsigned long entry; diff --git a/include/asm-sparc/processor.h b/include/asm-sparc/processor.h index 5a7a1a8d29ac..6fbb3f0af8d8 100644 --- a/include/asm-sparc/processor.h +++ b/include/asm-sparc/processor.h @@ -79,7 +79,7 @@ struct thread_struct { extern unsigned long thread_saved_pc(struct task_struct *t); /* Do necessary setup to start up a newly executed thread. */ -extern __inline__ void start_thread(struct pt_regs * regs, unsigned long pc, +static inline void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp) { register unsigned long zero asm("g1"); diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h index 9778b8c8b15b..19c978051118 100644 --- a/include/asm-sparc/psr.h +++ b/include/asm-sparc/psr.h @@ -38,7 +38,7 @@ #ifndef __ASSEMBLY__ /* Get the %psr register. */ -extern __inline__ unsigned int get_psr(void) +static inline unsigned int get_psr(void) { unsigned int psr; __asm__ __volatile__( @@ -53,7 +53,7 @@ extern __inline__ unsigned int get_psr(void) return psr; } -extern __inline__ void put_psr(unsigned int new_psr) +static inline void put_psr(unsigned int new_psr) { __asm__ __volatile__( "wr %0, 0x0, %%psr\n\t" @@ -72,7 +72,7 @@ extern __inline__ void put_psr(unsigned int new_psr) extern unsigned int fsr_storage; -extern __inline__ unsigned int get_fsr(void) +static inline unsigned int get_fsr(void) { unsigned int fsr = 0; diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h index 739ccac5dcf2..86a603ac7b20 100644 --- a/include/asm-sparc/sbi.h +++ b/include/asm-sparc/sbi.h @@ -65,7 +65,7 @@ struct sbi_regs { #ifndef __ASSEMBLY__ -extern __inline__ int acquire_sbi(int devid, int mask) +static inline int acquire_sbi(int devid, int mask) { __asm__ __volatile__ ("swapa [%2] %3, %0" : "=r" (mask) : @@ -75,7 +75,7 @@ extern __inline__ int acquire_sbi(int devid, int mask) return mask; } -extern __inline__ void release_sbi(int devid, int mask) +static inline void release_sbi(int devid, int mask) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (mask), @@ -83,7 +83,7 @@ extern __inline__ void release_sbi(int devid, int mask) "i" (ASI_M_CTL)); } -extern __inline__ void set_sbi_tid(int devid, int targetid) +static inline void set_sbi_tid(int devid, int targetid) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (targetid), @@ -91,7 +91,7 @@ extern __inline__ void set_sbi_tid(int devid, int targetid) "i" (ASI_M_CTL)); } -extern __inline__ int get_sbi_ctl(int devid, int cfgno) +static inline int get_sbi_ctl(int devid, int cfgno) { int cfg; @@ -102,7 +102,7 @@ extern __inline__ int get_sbi_ctl(int devid, int cfgno) return cfg; } -extern __inline__ void set_sbi_ctl(int devid, int cfgno, int cfg) +static inline void set_sbi_ctl(int devid, int cfgno, int cfg) { __asm__ __volatile__ ("sta %0, [%1] %2" : : "r" (cfg), diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h index 3a8b3908728a..a13cddcecec5 100644 --- a/include/asm-sparc/sbus.h +++ b/include/asm-sparc/sbus.h @@ -28,12 +28,12 @@ * numbers + offsets, and vice versa. */ -extern __inline__ unsigned long sbus_devaddr(int slotnum, unsigned long offset) +static inline unsigned long sbus_devaddr(int slotnum, unsigned long offset) { return (unsigned long) (SUN_SBUS_BVADDR+((slotnum)<<25)+(offset)); } -extern __inline__ int sbus_dev_slot(unsigned long dev_addr) +static inline int sbus_dev_slot(unsigned long dev_addr) { return (int) (((dev_addr)-SUN_SBUS_BVADDR)>>25); } @@ -80,7 +80,7 @@ struct sbus_bus { extern struct sbus_bus *sbus_root; -extern __inline__ int +static inline int sbus_is_slave(struct sbus_dev *dev) { /* XXX Have to write this for sun4c's */ diff --git a/include/asm-sparc/smp.h b/include/asm-sparc/smp.h index 4f96d8333a12..580c51d011df 100644 --- a/include/asm-sparc/smp.h +++ b/include/asm-sparc/smp.h @@ -60,22 +60,22 @@ BTFIXUPDEF_BLACKBOX(load_current) #define smp_cross_call(func,arg1,arg2,arg3,arg4,arg5) BTFIXUP_CALL(smp_cross_call)(func,arg1,arg2,arg3,arg4,arg5) #define smp_message_pass(target,msg,data,wait) BTFIXUP_CALL(smp_message_pass)(target,msg,data,wait) -extern __inline__ void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); } -extern __inline__ void xc1(smpfunc_t func, unsigned long arg1) +static inline void xc0(smpfunc_t func) { smp_cross_call(func, 0, 0, 0, 0, 0); } +static inline void xc1(smpfunc_t func, unsigned long arg1) { smp_cross_call(func, arg1, 0, 0, 0, 0); } -extern __inline__ void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) +static inline void xc2(smpfunc_t func, unsigned long arg1, unsigned long arg2) { smp_cross_call(func, arg1, arg2, 0, 0, 0); } -extern __inline__ void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, +static inline void xc3(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3) { smp_cross_call(func, arg1, arg2, arg3, 0, 0); } -extern __inline__ void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, +static inline void xc4(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4) { smp_cross_call(func, arg1, arg2, arg3, arg4, 0); } -extern __inline__ void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2, +static inline void xc5(smpfunc_t func, unsigned long arg1, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { smp_cross_call(func, arg1, arg2, arg3, arg4, arg5); } -extern __inline__ int smp_call_function(void (*func)(void *info), void *info, int nonatomic, int wait) +static inline int smp_call_function(void (*func)(void *info), void *info, int nonatomic, int wait) { xc1((smpfunc_t)func, (unsigned long)info); return 0; @@ -84,16 +84,16 @@ extern __inline__ int smp_call_function(void (*func)(void *info), void *info, in extern __volatile__ int __cpu_number_map[NR_CPUS]; extern __volatile__ int __cpu_logical_map[NR_CPUS]; -extern __inline__ int cpu_logical_map(int cpu) +static inline int cpu_logical_map(int cpu) { return __cpu_logical_map[cpu]; } -extern __inline__ int cpu_number_map(int cpu) +static inline int cpu_number_map(int cpu) { return __cpu_number_map[cpu]; } -extern __inline__ int hard_smp4m_processor_id(void) +static inline int hard_smp4m_processor_id(void) { int cpuid; @@ -104,7 +104,7 @@ extern __inline__ int hard_smp4m_processor_id(void) return cpuid; } -extern __inline__ int hard_smp4d_processor_id(void) +static inline int hard_smp4d_processor_id(void) { int cpuid; @@ -114,7 +114,7 @@ extern __inline__ int hard_smp4d_processor_id(void) } #ifndef MODULE -extern __inline__ int hard_smp_processor_id(void) +static inline int hard_smp_processor_id(void) { int cpuid; @@ -136,7 +136,7 @@ extern __inline__ int hard_smp_processor_id(void) return cpuid; } #else -extern __inline__ int hard_smp_processor_id(void) +static inline int hard_smp_processor_id(void) { int cpuid; diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h index 9b9c28ed748e..e7b6d346ae10 100644 --- a/include/asm-sparc/smpprim.h +++ b/include/asm-sparc/smpprim.h @@ -15,7 +15,7 @@ * atomic. */ -extern __inline__ __volatile__ char test_and_set(void *addr) +static inline __volatile__ char test_and_set(void *addr) { char state = 0; @@ -27,7 +27,7 @@ extern __inline__ __volatile__ char test_and_set(void *addr) } /* Initialize a spin-lock. */ -extern __inline__ __volatile__ smp_initlock(void *spinlock) +static inline __volatile__ smp_initlock(void *spinlock) { /* Unset the lock. */ *((unsigned char *) spinlock) = 0; @@ -36,7 +36,7 @@ extern __inline__ __volatile__ smp_initlock(void *spinlock) } /* This routine spins until it acquires the lock at ADDR. */ -extern __inline__ __volatile__ smp_lock(void *addr) +static inline __volatile__ smp_lock(void *addr) { while(test_and_set(addr) == 0xff) ; @@ -46,7 +46,7 @@ extern __inline__ __volatile__ smp_lock(void *addr) } /* This routine releases the lock at ADDR. */ -extern __inline__ __volatile__ smp_unlock(void *addr) +static inline __volatile__ smp_unlock(void *addr) { *((unsigned char *) addr) = 0; } diff --git a/include/asm-sparc/spinlock.h b/include/asm-sparc/spinlock.h index 111727a2bb4e..e344c98a6f5f 100644 --- a/include/asm-sparc/spinlock.h +++ b/include/asm-sparc/spinlock.h @@ -17,7 +17,7 @@ #define __raw_spin_unlock_wait(lock) \ do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0) -extern __inline__ void __raw_spin_lock(raw_spinlock_t *lock) +static inline void __raw_spin_lock(raw_spinlock_t *lock) { __asm__ __volatile__( "\n1:\n\t" @@ -37,7 +37,7 @@ extern __inline__ void __raw_spin_lock(raw_spinlock_t *lock) : "g2", "memory", "cc"); } -extern __inline__ int __raw_spin_trylock(raw_spinlock_t *lock) +static inline int __raw_spin_trylock(raw_spinlock_t *lock) { unsigned int result; __asm__ __volatile__("ldstub [%1], %0" @@ -47,7 +47,7 @@ extern __inline__ int __raw_spin_trylock(raw_spinlock_t *lock) return (result == 0); } -extern __inline__ void __raw_spin_unlock(raw_spinlock_t *lock) +static inline void __raw_spin_unlock(raw_spinlock_t *lock) { __asm__ __volatile__("stb %%g0, [%0]" : : "r" (lock) : "memory"); } @@ -78,7 +78,7 @@ extern __inline__ void __raw_spin_unlock(raw_spinlock_t *lock) * * Unfortunately this scheme limits us to ~16,000,000 cpus. */ -extern __inline__ void __read_lock(raw_rwlock_t *rw) +static inline void __read_lock(raw_rwlock_t *rw) { register raw_rwlock_t *lp asm("g1"); lp = rw; @@ -98,7 +98,7 @@ do { unsigned long flags; \ local_irq_restore(flags); \ } while(0) -extern __inline__ void __read_unlock(raw_rwlock_t *rw) +static inline void __read_unlock(raw_rwlock_t *rw) { register raw_rwlock_t *lp asm("g1"); lp = rw; diff --git a/include/asm-sparc/system.h b/include/asm-sparc/system.h index 3557781a4bfd..1f6b71f9e1b6 100644 --- a/include/asm-sparc/system.h +++ b/include/asm-sparc/system.h @@ -204,7 +204,7 @@ static inline unsigned long getipl(void) BTFIXUPDEF_CALL(void, ___xchg32, void) #endif -extern __inline__ unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) +static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val) { #ifdef CONFIG_SMP __asm__ __volatile__("swap [%2], %0" diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h index 6690ab956ea6..f62c7f878ee1 100644 --- a/include/asm-sparc/traps.h +++ b/include/asm-sparc/traps.h @@ -22,7 +22,7 @@ struct tt_entry { /* We set this to _start in system setup. */ extern struct tt_entry *sparc_ttable; -extern __inline__ unsigned long get_tbr(void) +static inline unsigned long get_tbr(void) { unsigned long tbr; From fdc657c66678551c7987dc23a78ae1a26251276f Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Oct 2005 17:37:27 -0700 Subject: [PATCH 021/101] [SUNSU]: Fix bogus locking in sunsu_change_mouse_baud() The lock is not held when calling this function, so we shouldn't drop then reacquire it. Based upon a report from Jim MacBaine. Signed-off-by: David S. Miller --- drivers/serial/sunsu.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index 5959e6755a81..656c0e8d160e 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -518,11 +518,7 @@ static void sunsu_change_mouse_baud(struct uart_sunsu_port *up) quot = up->port.uartclk / (16 * new_baud); - spin_unlock(&up->port.lock); - sunsu_change_speed(&up->port, up->cflag, 0, quot); - - spin_lock(&up->port.lock); } static void receive_kbd_ms_chars(struct uart_sunsu_port *up, struct pt_regs *regs, int is_break) From 3f19ee8cb3a1003cb5183696bc55934f5865f868 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Mon, 3 Oct 2005 21:36:41 -0400 Subject: [PATCH 022/101] [libata] improve device scan even more Since our max_lun is unconditionally set to 1, we might as well hardcode a LUN 0 probe, rather than a wildcard LUN scan. The ide-scsi driver sets max_lun to a value greater than under certain conditions: if ((drive->id->last_lun & 0x7) != 7) host->max_lun = (drive->id->last_lun & 0x7) + 1; else host->max_lun = 1; last_lun is Word 126 of IDENTIFY PACKET DEVICE, marked as obsolete and undocumented in non-ancient specs. We'll leave it out for now. Should the need arise to support multi-LUN ATAPI devices, we'll probably want to add the above code. Finally, there have been reports of REPORT LUNS commands locking up ATAPI drives. Eliminating the wildcard LUN scan could help reduce the trouble from problematic drives. --- drivers/scsi/libata-scsi.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 4fc0134d4272..8295a656e521 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1680,13 +1680,17 @@ void ata_scsi_simulate(u16 *id, void ata_scsi_scan_host(struct ata_port *ap) { + struct ata_device *dev; unsigned int i; if (ap->flags & ATA_FLAG_PORT_DISABLED) return; - for (i = 0; i < ATA_MAX_DEVICES; i++) - if (ata_dev_present(&ap->device[i])) - scsi_scan_target(&ap->host->shost_gendev, 0, i, ~0, 0); + for (i = 0; i < ATA_MAX_DEVICES; i++) { + dev = &ap->device[i]; + + if (ata_dev_present(dev)) + scsi_scan_target(&ap->host->shost_gendev, 0, i, 0, 0); + } } From c2681dd8c71c8fb4ca530f94536550fcd843aae4 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Mon, 3 Oct 2005 12:03:13 -0700 Subject: [PATCH 023/101] [PATCH] skge: set mac address oops with bonding Skge driver was bringing link up/down when changing mac address. This doesn't work in the bonding environment, and is more effort than needed. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5271 Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- drivers/net/skge.c | 24 ++++++++++++++++-------- 1 file changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/net/skge.c b/drivers/net/skge.c index fd398da4993b..c2e6484ef138 100644 --- a/drivers/net/skge.c +++ b/drivers/net/skge.c @@ -2837,21 +2837,29 @@ static void skge_netpoll(struct net_device *dev) static int skge_set_mac_address(struct net_device *dev, void *p) { struct skge_port *skge = netdev_priv(dev); - struct sockaddr *addr = p; - int err = 0; + struct skge_hw *hw = skge->hw; + unsigned port = skge->port; + const struct sockaddr *addr = p; if (!is_valid_ether_addr(addr->sa_data)) return -EADDRNOTAVAIL; - skge_down(dev); + spin_lock_bh(&hw->phy_lock); memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); - memcpy_toio(skge->hw->regs + B2_MAC_1 + skge->port*8, + memcpy_toio(hw->regs + B2_MAC_1 + port*8, dev->dev_addr, ETH_ALEN); - memcpy_toio(skge->hw->regs + B2_MAC_2 + skge->port*8, + memcpy_toio(hw->regs + B2_MAC_2 + port*8, dev->dev_addr, ETH_ALEN); - if (dev->flags & IFF_UP) - err = skge_up(dev); - return err; + + if (hw->chip_id == CHIP_ID_GENESIS) + xm_outaddr(hw, port, XM_SA, dev->dev_addr); + else { + gma_set_addr(hw, port, GM_SRC_ADDR_1L, dev->dev_addr); + gma_set_addr(hw, port, GM_SRC_ADDR_2L, dev->dev_addr); + } + spin_unlock_bh(&hw->phy_lock); + + return 0; } static const struct { From 0a1c80f1115b9a1aacf00a312a532ceef49dfa1b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 2 Oct 2005 22:42:11 -0700 Subject: [PATCH 024/101] [PATCH] ns83820: fix gfp flags type Fix implicit nocast warnings in ns83820 code: drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/net/ns83820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index e64df4d0800b..1d123d2b53fd 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -584,7 +584,7 @@ static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) return 0; } -static inline int rx_refill(struct net_device *ndev, int gfp) +static inline int rx_refill(struct net_device *ndev, unsigned int gfp) { struct ns83820 *dev = PRIV(ndev); unsigned i; From 8cb6108baee9dcd1dc96f476fe217d6a6b53c994 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 2 Oct 2005 22:41:09 -0700 Subject: [PATCH 025/101] [PATCH] ieee80211: fix gfp flags type Fix implicit nocast warnings in ieee80211 code: net/ieee80211/ieee80211_tx.c:215:9: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index c9aaff3fea1e..f9153671168e 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -207,7 +207,7 @@ void ieee80211_txb_free(struct ieee80211_txb *txb) } static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, - int gfp_mask) + unsigned int gfp_mask) { struct ieee80211_txb *txb; int i; From bb53d6d0e70cd0749a7844efc62cefeb24b134b6 Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 3 Oct 2005 22:03:28 -0400 Subject: [PATCH 026/101] [netdrvr] fix smc91c92_cs multicast bug The smc91c92_cs multicast does not work if the count of multicast address is 1. Signed-off-by: Signed-off-by: Jeff Garzik --- drivers/net/pcmcia/smc91c92_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index d652e1eddb45..c7cca842e5ee 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -1832,7 +1832,7 @@ static void fill_multicast_tbl(int count, struct dev_mc_list *addrs, { struct dev_mc_list *mc_addr; - for (mc_addr = addrs; mc_addr && --count > 0; mc_addr = mc_addr->next) { + for (mc_addr = addrs; mc_addr && count-- > 0; mc_addr = mc_addr->next) { u_int position = ether_crc(6, mc_addr->dmi_addr); #ifndef final_version /* Verify multicast address. */ if ((mc_addr->dmi_addr[0] & 1) == 0) From 9123e0d78990246304fe681167b8d8097f1e02d7 Mon Sep 17 00:00:00 2001 From: Ursula Braun Date: Fri, 30 Sep 2005 10:17:24 +0200 Subject: [PATCH 027/101] [PATCH] s390: qeth driver fixes From: Peter Tiedemann From: Frank Pavlic minor qeth fixes: - free old skb in qeth_realloc_headroom after duplicating skb - disable IPV6 support for Hipersockets devices - call ccw_device_set_offline on every channel regardless of the return value of the prior ccw_device_set_offline calls - allocate qdio structures in DMA-area - schedule recovery of appropriate card when cable has been inserted again. - add missing initialization of card->lock - write sequence number in skb->cb for SNA protocol which requires strictly serialized packets. Signed-off-by: Frank Pavlic diffstat: qeth.h | 2 ++ qeth_main.c | 37 +++++++++++++++++-------------------- 2 files changed, 19 insertions(+), 20 deletions(-) Signed-off-by: Jeff Garzik --- drivers/s390/net/qeth.h | 2 ++ drivers/s390/net/qeth_main.c | 37 +++++++++++++++++------------------- 2 files changed, 19 insertions(+), 20 deletions(-) diff --git a/drivers/s390/net/qeth.h b/drivers/s390/net/qeth.h index 2ad4797ce024..9963479ba89f 100644 --- a/drivers/s390/net/qeth.h +++ b/drivers/s390/net/qeth.h @@ -686,6 +686,7 @@ struct qeth_seqno { __u32 pdu_hdr; __u32 pdu_hdr_ack; __u16 ipa; + __u32 pkt_seqno; }; struct qeth_reply { @@ -848,6 +849,7 @@ qeth_realloc_headroom(struct qeth_card *card, struct sk_buff **skb, int size) "on interface %s", QETH_CARD_IFNAME(card)); return -ENOMEM; } + kfree_skb(*skb); *skb = new_skb; } return 0; diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c index 71de834ece1a..bd28e2438d7f 100644 --- a/drivers/s390/net/qeth_main.c +++ b/drivers/s390/net/qeth_main.c @@ -511,7 +511,7 @@ static int __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) { struct qeth_card *card = (struct qeth_card *) cgdev->dev.driver_data; - int rc = 0; + int rc = 0, rc2 = 0, rc3 = 0; enum qeth_card_states recover_flag; QETH_DBF_TEXT(setup, 3, "setoffl"); @@ -523,11 +523,13 @@ __qeth_set_offline(struct ccwgroup_device *cgdev, int recovery_mode) CARD_BUS_ID(card)); return -ERESTARTSYS; } - if ((rc = ccw_device_set_offline(CARD_DDEV(card))) || - (rc = ccw_device_set_offline(CARD_WDEV(card))) || - (rc = ccw_device_set_offline(CARD_RDEV(card)))) { + rc = ccw_device_set_offline(CARD_DDEV(card)); + rc2 = ccw_device_set_offline(CARD_WDEV(card)); + rc3 = ccw_device_set_offline(CARD_RDEV(card)); + if (!rc) + rc = (rc2) ? rc2 : rc3; + if (rc) QETH_DBF_TEXT_(setup, 2, "1err%d", rc); - } if (recover_flag == CARD_STATE_UP) card->state = CARD_STATE_RECOVER; qeth_notify_processes(); @@ -1046,6 +1048,7 @@ qeth_setup_card(struct qeth_card *card) spin_lock_init(&card->vlanlock); card->vlangrp = NULL; #endif + spin_lock_init(&card->lock); spin_lock_init(&card->ip_lock); spin_lock_init(&card->thread_mask_lock); card->thread_start_mask = 0; @@ -1626,16 +1629,6 @@ qeth_cmd_timeout(unsigned long data) spin_unlock_irqrestore(&reply->card->lock, flags); } -static void -qeth_reset_ip_addresses(struct qeth_card *card) -{ - QETH_DBF_TEXT(trace, 2, "rstipadd"); - - qeth_clear_ip_list(card, 0, 1); - /* this function will also schedule the SET_IP_THREAD */ - qeth_set_multicast_list(card->dev); -} - static struct qeth_ipa_cmd * qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) { @@ -1664,9 +1657,8 @@ qeth_check_ipa_data(struct qeth_card *card, struct qeth_cmd_buffer *iob) "IP address reset.\n", QETH_CARD_IFNAME(card), card->info.chpid); - card->lan_online = 1; netif_carrier_on(card->dev); - qeth_reset_ip_addresses(card); + qeth_schedule_recovery(card); return NULL; case IPA_CMD_REGISTER_LOCAL_ADDR: QETH_DBF_TEXT(trace,3, "irla"); @@ -2387,6 +2379,7 @@ qeth_layer2_rebuild_skb(struct qeth_card *card, struct sk_buff *skb, skb_pull(skb, VLAN_HLEN); } #endif + *((__u32 *)skb->cb) = ++card->seqno.pkt_seqno; return vlan_id; } @@ -3014,7 +3007,7 @@ qeth_alloc_buffer_pool(struct qeth_card *card) return -ENOMEM; } for(j = 0; j < QETH_MAX_BUFFER_ELEMENTS(card); ++j){ - ptr = (void *) __get_free_page(GFP_KERNEL); + ptr = (void *) __get_free_page(GFP_KERNEL|GFP_DMA); if (!ptr) { while (j > 0) free_page((unsigned long) @@ -3058,7 +3051,8 @@ qeth_alloc_qdio_buffers(struct qeth_card *card) if (card->qdio.state == QETH_QDIO_ALLOCATED) return 0; - card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), GFP_KERNEL); + card->qdio.in_q = kmalloc(sizeof(struct qeth_qdio_q), + GFP_KERNEL|GFP_DMA); if (!card->qdio.in_q) return - ENOMEM; QETH_DBF_TEXT(setup, 2, "inq"); @@ -3083,7 +3077,7 @@ qeth_alloc_qdio_buffers(struct qeth_card *card) } for (i = 0; i < card->qdio.no_out_queues; ++i){ card->qdio.out_qs[i] = kmalloc(sizeof(struct qeth_qdio_out_q), - GFP_KERNEL); + GFP_KERNEL|GFP_DMA); if (!card->qdio.out_qs[i]){ while (i > 0) kfree(card->qdio.out_qs[--i]); @@ -6470,6 +6464,9 @@ qeth_query_ipassists_cb(struct qeth_card *card, struct qeth_reply *reply, if (cmd->hdr.prot_version == QETH_PROT_IPV4) { card->options.ipa4.supported_funcs = cmd->hdr.ipa_supported; card->options.ipa4.enabled_funcs = cmd->hdr.ipa_enabled; + /* Disable IPV6 support hard coded for Hipersockets */ + if(card->info.type == QETH_CARD_TYPE_IQD) + card->options.ipa4.supported_funcs &= ~IPA_IPV6; } else { #ifdef CONFIG_QETH_IPV6 card->options.ipa6.supported_funcs = cmd->hdr.ipa_supported; From 31961943e3110c5a1c36b1e0069c29f7c4380e51 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Fri, 30 Sep 2005 01:36:00 -0400 Subject: [PATCH 028/101] [PATCH] libata: Marvell SATA support (DMA mode) (resend: v0.22) This is my libata compatible low level driver for the Marvell SATA family. Currently it runs in DMA mode on a 6081 chip. The 5xxx series parts are not yet DMA capable in this driver because the registers have differences that haven't been accounted for yet. Basically, I'm focused on the 6xxx series right now. I apologize for those seeing problems on the 5xxx series, I've not had a chance to look at those problems yet. For those curious, the previous bug causing the SCSI timeout and subsequent panics was caused by an improper clear of hc_irq_cause in mv_host_intr(). This version is running well in my environment (6081 chips, with/without SW raid1) and is showing equal or better performance compared to the Marvell driver (mv_sata) in my initial tests (timed dd's of reads/writes to/from memory/disk). I still need to look at the causes of occasional problems such as this: ata11: translating stat 0x35 err 0x00 to sense ata11: status=0x35 { DeviceFault SeekComplete CorrectedError Error } SCSI error : <10 0 0 0> return code = 0x8000002 Current sda: sense key Hardware Error end_request: I/O error, dev sda, sector 3155010 and this, seen at init time: ATA: abnormal status 0x80 on port 0xE093911C but they aren't showstoppers. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 946 ++++++++++++++++++++++++++++++++--------- 1 file changed, 753 insertions(+), 193 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ea76fe44585e..ecda7df21142 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.12" +#define DRV_VERSION "0.22" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -55,31 +55,61 @@ enum { MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - MV_Q_CT = 32, - MV_CRQB_SZ = 32, - MV_CRPB_SZ = 8, + MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - MV_DMA_BOUNDARY = 0xffffffffU, - SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)), + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 176, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), + + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */ + /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ MV_PORT_MASK = 3, /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_BDMA = (1 << 28), /* Basic DMA */ + MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ + MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | + MV_FLAG_GLBL_SFT_RST), chip_504x = 0, chip_508x = 1, chip_604x = 2, chip_608x = 3, + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + + EPRD_FLAG_END_OF_TBL = (1 << 31), + /* PCI interface registers */ + PCI_COMMAND_OFS = 0xc00, + PCI_MAIN_CMD_STS_OFS = 0xd30, STOP_PCI_MASTER = (1 << 2), PCI_MASTER_EMPTY = (1 << 3), @@ -111,20 +141,13 @@ enum { HC_CFG_OFS = 0, HC_IRQ_CAUSE_OFS = 0x14, - CRBP_DMA_DONE = (1 << 0), /* shift by port # */ + CRPB_DMA_DONE = (1 << 0), /* shift by port # */ HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ /* Shadow block registers */ - SHD_PIO_DATA_OFS = 0x100, - SHD_FEA_ERR_OFS = 0x104, - SHD_SECT_CNT_OFS = 0x108, - SHD_LBA_L_OFS = 0x10C, - SHD_LBA_M_OFS = 0x110, - SHD_LBA_H_OFS = 0x114, - SHD_DEV_HD_OFS = 0x118, - SHD_CMD_STA_OFS = 0x11C, - SHD_CTL_AST_OFS = 0x120, + SHD_BLK_OFS = 0x100, + SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ @@ -132,6 +155,11 @@ enum { /* Port registers */ EDMA_CFG_OFS = 0, + EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ + EDMA_CFG_NCQ = (1 << 5), + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ EDMA_ERR_IRQ_CAUSE_OFS = 0x8, EDMA_ERR_IRQ_MASK_OFS = 0xc, @@ -161,33 +189,85 @@ enum { EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), + EDMA_REQ_Q_BASE_HI_OFS = 0x10, + EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI_OFS = 0x1c, + EDMA_RSP_Q_IN_PTR_OFS = 0x20, + EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, + EDMA_RSP_Q_PTR_SHIFT = 3, + EDMA_CMD_OFS = 0x28, EDMA_EN = (1 << 0), EDMA_DS = (1 << 1), ATA_RST = (1 << 2), - /* BDMA is 6xxx part only */ - BDMA_CMD_OFS = 0x224, - BDMA_START = (1 << 0), + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), - MV_UNDEF = 0, + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), + MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), +}; + +/* Command ReQuest Block: 32B */ +struct mv_crqb { + u32 sg_addr; + u32 sg_addr_hi; + u16 ctrl_flags; + u16 ata_cmd[11]; +}; + +/* Command ResPonse Block: 8B */ +struct mv_crpb { + u16 id; + u16 flags; + u32 tmstmp; +}; + +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + u32 addr; + u32 flags_size; + u32 addr_hi; + u32 reserved; }; struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl; + dma_addr_t sg_tbl_dma; + unsigned req_producer; /* cp of req_in_ptr */ + unsigned rsp_consumer; /* cp of rsp_out_ptr */ + u32 pp_flags; }; struct mv_host_priv { - + u32 hp_flags; }; static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); +static u8 mv_check_err(struct ata_port *ap); static void mv_phy_reset(struct ata_port *ap); -static int mv_master_reset(void __iomem *mmio_base); +static void mv_host_stop(struct ata_host_set *host_set); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static Scsi_Host_Template mv_sht = { @@ -196,13 +276,13 @@ static Scsi_Host_Template mv_sht = { .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .eh_strategy_handler = ata_scsi_error, - .can_queue = ATA_DEF_QUEUE, + .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_UNDEF, + .sg_tablesize = MV_MAX_SG_CT, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, - .use_clustering = MV_UNDEF, + .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, @@ -216,15 +296,16 @@ static struct ata_port_operations mv_ops = { .tf_load = ata_tf_load, .tf_read = ata_tf_read, .check_status = ata_check_status, + .check_err = mv_check_err, .exec_command = ata_exec_command, .dev_select = ata_std_dev_select, .phy_reset = mv_phy_reset, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, - .eng_timeout = ata_eng_timeout, + .eng_timeout = mv_eng_timeout, .irq_handler = mv_interrupt, .irq_clear = mv_irq_clear, @@ -232,46 +313,39 @@ static struct ata_port_operations mv_ops = { .scr_read = mv_scr_read, .scr_write = mv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, }; static struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = MV_COMMON_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | - MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, }; @@ -306,12 +380,6 @@ static inline void writelfl(unsigned long data, void __iomem *addr) (void) readl(addr); /* flush to avoid PCI posted write */ } -static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio) -{ - return ((void __iomem *)((unsigned long)port_mmio & - (unsigned long)SATAHC_MASK)); -} - static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) { return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); @@ -329,26 +397,143 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long flags) +static inline int mv_get_hc_count(unsigned long hp_flags) { - return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1); -} - -static inline int mv_is_edma_active(struct ata_port *ap) -{ - void __iomem *port_mmio = mv_ap_base(ap); - return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); -} - -static inline int mv_port_bdma_capable(struct ata_port *ap) -{ - return (ap->flags & MV_FLAG_BDMA); + return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } static void mv_irq_clear(struct ata_port *ap) { } +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp, + struct ata_port *ap) +{ + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + + spin_unlock_irqrestore(&ap->host_set->lock, flags); +} + +static void mv_stop_dma(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + u32 reg; + int i; + + spin_lock_irqsave(&ap->host_set->lock, flags); + + if (!(MV_PP_FLAG_EDMA_DS_ACT & pp->pp_flags) && + ((MV_PP_FLAG_EDMA_EN & pp->pp_flags) || + (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)))) { + /* Disable EDMA if we're not already trying to disable it + * and it is currently active. The disable bit auto clears. + */ + pp->pp_flags |= MV_PP_FLAG_EDMA_DS_ACT; + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + /* now properly wait for the eDMA to stop */ + for (i = 1000; i > 0; i--) { + reg = readl(port_mmio + EDMA_CMD_OFS); + if (!(EDMA_EN & reg)) { + break; + } + udelay(100); + } + + spin_lock_irqsave(&ap->host_set->lock, flags); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_DS_ACT; + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (EDMA_EN & reg) { + printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + } +} + +static void mv_dump_mem(void __iomem *start, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ",readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw); + printk("%08x ",dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) +{ +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n",p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n",p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif +} + static unsigned int mv_scr_offset(unsigned int sc_reg_in) { unsigned int ofs; @@ -389,30 +574,29 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -static int mv_master_reset(void __iomem *mmio_base) +/* This routine only applies to 6xxx parts */ +static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; u32 t; - VPRINTK("ENTER\n"); - /* Following procedure defined in PCI "main command and status * register" table. */ t = readl(reg); writel(t | STOP_PCI_MASTER, reg); - for (i = 0; i < 100; i++) { - msleep(10); + for (i = 0; i < 1000; i++) { + udelay(1); t = readl(reg); if (PCI_MASTER_EMPTY & t) { break; } } if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME "PCI master won't flush\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; goto done; } @@ -425,40 +609,312 @@ static int mv_master_reset(void __iomem *mmio_base) } while (!(GLOB_SFT_RST & t) && (i-- > 0)); if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME "can't set global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; goto done; } - /* clear reset */ + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ i = 5; do { - writel(t & ~GLOB_SFT_RST, reg); + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); t = readl(reg); udelay(1); } while ((GLOB_SFT_RST & t) && (i-- > 0)); if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME "can't clear global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; + } +done: + return rc; +} + +static void mv_host_stop(struct ata_host_set *host_set) +{ + struct mv_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + if (hpriv->hp_flags & MV_HP_FLAG_MSI) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } + kfree(hpriv); + ata_host_stop(host_set); +} + +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp; + void __iomem *port_mmio = mv_ap_base(ap); + void *mem; + dma_addr_t mem_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + return -ENOMEM; + } + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, MV_PORT_PRIV_DMA_SZ); + + /* First item in chunk of DMA memory: + * 32-slot command request table (CRQB), 32 bytes each in size + */ + pp->crqb = mem; + pp->crqb_dma = mem_dma; + mem += MV_CRQB_Q_SZ; + mem_dma += MV_CRQB_Q_SZ; + + /* Second item: + * 32-slot command response table (CRPB), 8 bytes each in size + */ + pp->crpb = mem; + pp->crpb_dma = mem_dma; + mem += MV_CRPB_Q_SZ; + mem_dma += MV_CRPB_Q_SZ; + + /* Third item: + * Table of scatter-gather descriptors (ePRD), 16 bytes each + */ + pp->sg_tbl = mem; + pp->sg_tbl_dma = mem_dma; + + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); + + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + pp->req_producer = pp->rsp_consumer = 0; + + /* Don't turn on EDMA here...do it before DMA commands only. Else + * we'll be unable to send non-data, PIO, etc due to restricted access + * to shadow regs. + */ + ap->private_data = pp; + return 0; +} + +static void mv_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp = ap->private_data; + + mv_stop_dma(ap); + + ap->private_data = NULL; + dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); + kfree(pp); +} + +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + unsigned int i; + + for (i = 0; i < qc->n_elem; i++) { + u32 sg_len; + dma_addr_t addr; + + addr = sg_dma_address(&qc->sg[i]); + sg_len = sg_dma_len(&qc->sg[i]); + + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); + pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); + } + if (0 < qc->n_elem) { + pp->sg_tbl[qc->n_elem - 1].flags_size |= EPRD_FLAG_END_OF_TBL; + } +} + +static inline unsigned mv_inc_q_index(unsigned *index) +{ + *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK; + return *index; +} + +static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +{ + *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); +} + +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + u16 *cw; + struct ata_taskfile *tf; + u16 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) { + return; } - done: - VPRINTK("EXIT, rc = %i\n", rc); - return rc; + /* the req producer index should be the same as we remember it */ + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + + /* Fill in command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + flags |= CRQB_FLAG_READ; + } + assert(MV_MAX_Q_DEPTH > qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + pp->crqb[pp->req_producer].sg_addr = + cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + pp->crqb[pp->req_producer].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[pp->req_producer].ata_cmd[0]; + tf = &qc->tf; + + /* Sadly, the CRQB cannot accomodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect. + */ + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; +#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; +#endif /* FIXME: remove this line when NCQ added */ + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + return; + } + mv_fill_sg(qc); +} + +static int mv_qc_issue(struct ata_queued_cmd *qc) +{ + void __iomem *port_mmio = mv_ap_base(qc->ap); + struct mv_port_priv *pp = qc->ap->private_data; + u32 in_ptr; + + if (ATA_PROT_DMA != qc->tf.protocol) { + /* We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_dma(qc->ap); + return ata_qc_issue_prot(qc); + } + + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + /* the req producer index should be the same as we remember it */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + /* until we do queuing, the queue should be empty at this point */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + mv_inc_q_index(&pp->req_producer); /* now incr producer index */ + + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + /* turn on EDMA if not already on */ + mv_start_dma(port_mmio, pp, qc->ap); + } + assert(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + + /* and write the request in pointer to kick the EDMA to life */ + in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; + in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT; + writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + return 0; +} + +static u8 mv_get_crpb_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 out_ptr; + + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* the response consumer index should be the same as we remember it */ + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* increment our consumer index... */ + pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); + + /* and, until we do NCQ, there should only be 1 CRPB waiting */ + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* write out our inc'd consumer index so EDMA knows we're caught up */ + out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; + out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT; + writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Return ATA status register for completed CRPB */ + return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); } static void mv_err_intr(struct ata_port *ap) { - void __iomem *port_mmio; + void __iomem *port_mmio = mv_ap_base(ap); u32 edma_err_cause, serr = 0; - /* bug here b/c we got an err int on a port we don't know about, - * so there's no way to clear it - */ - BUG_ON(NULL == ap); - port_mmio = mv_ap_base(ap); - edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); if (EDMA_ERR_SERR & edma_err_cause) { @@ -477,8 +933,7 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC - */ +/* Handle any outstanding interrupts in a single SATAHC */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) { @@ -487,8 +942,8 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap; struct ata_queued_cmd *qc; u32 hc_irq_cause; - int shift, port, port0, hard_port; - u8 ata_status; + int shift, port, port0, hard_port, handled; + u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -499,7 +954,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); if (hc_irq_cause) { - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); } VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", @@ -508,35 +963,38 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ - ata_status = 0xffU; + handled = 0; /* ensure ata_status is set if handled++ */ - if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) { - BUG_ON(NULL == ap); - /* rcv'd new resp, basic DMA complete, or ATA IRQ */ - /* This is needed to clear the ATA INTRQ. - * FIXME: don't read the status reg in EDMA mode! + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { + /* new CRPB on the queue; just one at a time until NCQ + */ + ata_status = mv_get_crpb_status(ap); + handled++; + } else if ((DEV_IRQ << hard_port) & hc_irq_cause) { + /* received ATA IRQ; read the status reg to clear INTRQ */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr); + handled++; } - shift = port * 2; + shift = port << 1; /* (port * 2) */ if (port >= MV_PORTS_PER_HC) { shift++; /* skip bit 8 in the HC Main IRQ reg */ } if ((PORT0_ERR << shift) & relevant) { mv_err_intr(ap); - /* FIXME: smart to OR in ATA_ERR? */ + /* OR in ATA_ERR to ensure libata knows we took one */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr) | ATA_ERR; + handled++; } - if (ap) { + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); - BUG_ON(0xffU == ata_status); /* mark qc status appropriately */ ata_qc_complete(qc, ata_status); } @@ -550,12 +1008,10 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, { struct ata_host_set *host_set = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio; + void __iomem *mmio = host_set->mmio_base; u32 irq_stat; - mmio = host_set->mmio_base; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); /* check the cases where we either have nothing pending or have read * a bogus register value which can indicate HW removal or PCI fault @@ -564,64 +1020,87 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); spin_lock(&host_set->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { mv_host_intr(host_set, relevant, hc); - handled = 1; + handled++; } } if (PCI_ERR & irq_stat) { - /* FIXME: these are all masked by default, but still need - * to recover from them properly. - */ - } + printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", + readl(mmio + PCI_IRQ_CAUSE_OFS)); + VPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + handled++; + } spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } +static u8 mv_check_err(struct ata_port *ap) +{ + mv_stop_dma(ap); /* can't read shadow regs if DMA on */ + return readb((void __iomem *) ap->ioaddr.error_addr); +} + +/* Part of this is taken from __sata_phy_reset and modified to not sleep + * since this routine gets called from interrupt level. + */ static void mv_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; - u32 edma = 0, bdma; + unsigned long timeout; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - edma = readl(port_mmio + EDMA_CMD_OFS); - if (EDMA_EN & edma) { - /* disable EDMA if active */ - edma &= ~EDMA_EN; - writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS); - udelay(1); - } else if (mv_port_bdma_capable(ap) && - (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) { - /* disable BDMA if active */ - writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS); - } + mv_stop_dma(ap); - writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); udelay(25); /* allow reset propagation */ /* Spec never mentions clearing the bit. Marvell's driver does * clear the bit, however. */ - writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("Done. Now calling __sata_phy_reset()\n"); + VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); /* proceed to init communications via the scr_control reg */ - __sata_phy_reset(ap); + scr_write_flush(ap, SCR_CONTROL, 0x301); + mdelay(1); + scr_write_flush(ap, SCR_CONTROL, 0x300); + timeout = jiffies + (HZ * 1); + do { + mdelay(10); + if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); - if (ap->flags & ATA_FLAG_PORT_DISABLED) { - VPRINTK("Port disabled pre-sig. Exiting.\n"); + VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); + + if (sata_dev_present(ap)) { + ata_port_probe(ap); + } else { + printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", + ap->id, scr_read(ap, SCR_STATUS)); + ata_port_disable(ap); return; } + ap->cbl = ATA_CBL_SATA; tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); @@ -636,28 +1115,76 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } -static void mv_port_init(struct ata_ioports *port, unsigned long base) +static void mv_eng_timeout(struct ata_port *ap) { - /* PIO related setup */ - port->data_addr = base + SHD_PIO_DATA_OFS; - port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS; - port->nsect_addr = base + SHD_SECT_CNT_OFS; - port->lbal_addr = base + SHD_LBA_L_OFS; - port->lbam_addr = base + SHD_LBA_M_OFS; - port->lbah_addr = base + SHD_LBA_H_OFS; - port->device_addr = base + SHD_DEV_HD_OFS; - port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS; - port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS; - /* unused */ + struct ata_queued_cmd *qc; + unsigned long flags; + + printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + DPRINTK("All regs @ start of eng_timeout\n"); + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + to_pci_dev(ap->host_set->dev)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", + ap->host_set->mmio_base, ap, qc, qc->scsicmd, + &qc->scsicmd->cmnd); + + mv_err_intr(ap); + mv_phy_reset(ap); + + if (!qc) { + printk(KERN_ERR "ata%u: BUG: timeout without command\n", + ap->id); + } else { + /* hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, ATA_ERR); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } +} + +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) +{ + unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; + unsigned serr_ofs; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + + /* unused: */ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + /* Clear any currently outstanding port interrupt conditions */ + serr_ofs = mv_scr_offset(SCR_ERROR); + writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + /* unmask all EDMA error interrupts */ - writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS); + writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl((void __iomem *)base + EDMA_CFG_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS)); + readl(port_mmio + EDMA_CFG_OFS), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), + readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } static int mv_host_init(struct ata_probe_ent *probe_ent) @@ -666,7 +1193,8 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; - if (mv_master_reset(probe_ent->mmio_base)) { + if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && + mv_global_soft_reset(probe_ent->mmio_base)) { rc = 1; goto done; } @@ -676,17 +1204,27 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio); + mv_port_init(&probe_ent->port[port], port_mmio); } for (hc = 0; hc < n_hc; hc++) { - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc, - readl(mv_hc_base(mmio, hc) + HC_CFG_OFS), - readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS)); + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG_OFS), + readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + + /* and unmask interrupt generation for host regs */ + writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " "PCI int cause/mask=0x%08x/0x%08x\n", @@ -694,11 +1232,37 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); - - done: +done: return rc; } +/* FIXME: complete this */ +static void mv_print_info(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct mv_host_priv *hpriv = probe_ent->private_data; + u8 rev_id, scc; + const char *scc_s; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "unknown"; + + printk(KERN_INFO DRV_NAME + "(%s) %u slots %u ports %s mode IRQ via %s\n", + pci_name(pdev), (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -706,16 +1270,12 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct mv_host_priv *hpriv; unsigned int board_idx = (unsigned int)ent->driver_data; void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; + int pci_dev_busy = 0, rc; if (!printed_version++) { - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); + printk(KERN_INFO DRV_NAME " version " DRV_VERSION "\n"); } - VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number, - PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); - rc = pci_enable_device(pdev); if (rc) { return rc; @@ -727,8 +1287,6 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out; } - pci_intx(pdev, 1); - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; @@ -739,8 +1297,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR), - pci_resource_len(pdev, MV_PRIMARY_BAR)); + mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -769,37 +1326,40 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_out_hpriv; } -/* mv_print_info(probe_ent); */ - { - int b, w; - u32 dw[4]; /* hold a line of 16b */ - VPRINTK("PCI config space:\n"); - for (b = 0; b < 0x40; ) { - for (w = 0; w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw[w]); - b += sizeof(*dw); - } - VPRINTK("%08x %08x %08x %08x\n", - dw[0],dw[1],dw[2],dw[3]); - } + /* Enable interrupts */ + if (pci_enable_msi(pdev) == 0) { + hpriv->hp_flags |= MV_HP_FLAG_MSI; + } else { + pci_intx(pdev, 1); } - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(probe_ent); + if (ata_device_add(probe_ent) == 0) { + rc = -ENODEV; /* No devices discovered */ + goto err_out_dev_add; + } + + kfree(probe_ent); return 0; - err_out_hpriv: +err_out_dev_add: + if (MV_HP_FLAG_MSI & hpriv->hp_flags) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } +err_out_hpriv: kfree(hpriv); - err_out_iounmap: - iounmap(mmio_base); - err_out_free_ent: +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: kfree(probe_ent); - err_out_regions: +err_out_regions: pci_release_regions(pdev); - err_out: +err_out: if (!pci_dev_busy) { pci_disable_device(pdev); } From fe998aa7e27f125f6768ec6b137b0ce2c9790509 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 2 Oct 2005 11:54:29 +0900 Subject: [PATCH 029/101] [PATCH] libata: add ATA exceptions chapter to doc Hello, Jeff. This patch adds ATA errors & exceptions chapter to Documentation/DocBook/libata.tmpl. As suggested, the chapter is placed before low level driver specific chapters. Contents are unchanged from the last posting. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- Documentation/DocBook/libata.tmpl | 716 ++++++++++++++++++++++++++++++ 1 file changed, 716 insertions(+) diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl index b2ec780bcda1..d260d92089ad 100644 --- a/Documentation/DocBook/libata.tmpl +++ b/Documentation/DocBook/libata.tmpl @@ -787,6 +787,722 @@ and other resources, etc. !Idrivers/scsi/libata-scsi.c + + ATA errors & exceptions + + + This chapter tries to identify what error/exception conditions exist + for ATA/ATAPI devices and describe how they should be handled in + implementation-neutral way. + + + + The term 'error' is used to describe conditions where either an + explicit error condition is reported from device or a command has + timed out. + + + + The term 'exception' is either used to describe exceptional + conditions which are not errors (say, power or hotplug events), or + to describe both errors and non-error exceptional conditions. Where + explicit distinction between error and exception is necessary, the + term 'non-error exception' is used. + + + + Exception categories + + Exceptions are described primarily with respect to legacy + taskfile + bus master IDE interface. If a controller provides + other better mechanism for error reporting, mapping those into + categories described below shouldn't be difficult. + + + + In the following sections, two recovery actions - reset and + reconfiguring transport - are mentioned. These are described + further in . + + + + HSM violation + + This error is indicated when STATUS value doesn't match HSM + requirement during issuing or excution any ATA/ATAPI command. + + + + Examples + + + + ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying + to issue a command. + + + + + + !BSY && !DRQ during PIO data transfer. + + + + + + DRQ on command completion. + + + + + + !BSY && ERR after CDB tranfer starts but before the + last byte of CDB is transferred. ATA/ATAPI standard states + that "The device shall not terminate the PACKET command + with an error before the last byte of the command packet has + been written" in the error outputs description of PACKET + command and the state diagram doesn't include such + transitions. + + + + + + + In these cases, HSM is violated and not much information + regarding the error can be acquired from STATUS or ERROR + register. IOW, this error can be anything - driver bug, + faulty device, controller and/or cable. + + + + As HSM is violated, reset is necessary to restore known state. + Reconfiguring transport for lower speed might be helpful too + as transmission errors sometimes cause this kind of errors. + + + + + ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION) + + + These are errors detected and reported by ATA/ATAPI devices + indicating device problems. For this type of errors, STATUS + and ERROR register values are valid and describe error + condition. Note that some of ATA bus errors are detected by + ATA/ATAPI devices and reported using the same mechanism as + device errors. Those cases are described later in this + section. + + + + For ATA commands, this type of errors are indicated by !BSY + && ERR during command execution and on completion. + + + For ATAPI commands, + + + + + + !BSY && ERR && ABRT right after issuing PACKET + indicates that PACKET command is not supported and falls in + this category. + + + + + + !BSY && ERR(==CHK) && !ABRT after the last + byte of CDB is transferred indicates CHECK CONDITION and + doesn't fall in this category. + + + + + + !BSY && ERR(==CHK) && ABRT after the last byte + of CDB is transferred *probably* indicates CHECK CONDITION and + doesn't fall in this category. + + + + + + + Of errors detected as above, the followings are not ATA/ATAPI + device errors but ATA bus errors and should be handled + according to . + + + + + + CRC error during data transfer + + + This is indicated by ICRC bit in the ERROR register and + means that corruption occurred during data transfer. Upto + ATA/ATAPI-7, the standard specifies that this bit is only + applicable to UDMA transfers but ATA/ATAPI-8 draft revision + 1f says that the bit may be applicable to multiword DMA and + PIO. + + + + + + ABRT error during data transfer or on completion + + + Upto ATA/ATAPI-7, the standard specifies that ABRT could be + set on ICRC errors and on cases where a device is not able + to complete a command. Combined with the fact that MWDMA + and PIO transfer errors aren't allowed to use ICRC bit upto + ATA/ATAPI-7, it seems to imply that ABRT bit alone could + indicate tranfer errors. + + + However, ATA/ATAPI-8 draft revision 1f removes the part + that ICRC errors can turn on ABRT. So, this is kind of + gray area. Some heuristics are needed here. + + + + + + + + ATA/ATAPI device errors can be further categorized as follows. + + + + + + Media errors + + + This is indicated by UNC bit in the ERROR register. ATA + devices reports UNC error only after certain number of + retries cannot recover the data, so there's nothing much + else to do other than notifying upper layer. + + + READ and WRITE commands report CHS or LBA of the first + failed sector but ATA/ATAPI standard specifies that the + amount of transferred data on error completion is + indeterminate, so we cannot assume that sectors preceding + the failed sector have been transferred and thus cannot + complete those sectors successfully as SCSI does. + + + + + + Media changed / media change requested error + + + <<TODO: fill here>> + + + + + Address error + + + This is indicated by IDNF bit in the ERROR register. + Report to upper layer. + + + + + Other errors + + + This can be invalid command or parameter indicated by ABRT + ERROR bit or some other error condition. Note that ABRT + bit can indicate a lot of things including ICRC and Address + errors. Heuristics needed. + + + + + + + + Depending on commands, not all STATUS/ERROR bits are + applicable. These non-applicable bits are marked with + "na" in the output descriptions but upto ATA/ATAPI-7 + no definition of "na" can be found. However, + ATA/ATAPI-8 draft revision 1f describes "N/A" as + follows. + + +
+ + 3.2.3.3a N/A + + + A keyword the indicates a field has no defined value in + this standard and should not be checked by the host or + device. N/A fields should be cleared to zero. + + + + +
+ + + So, it seems reasonable to assume that "na" bits are + cleared to zero by devices and thus need no explicit masking. + + + + + + ATAPI device CHECK CONDITION + + + ATAPI device CHECK CONDITION error is indicated by set CHK bit + (ERR bit) in the STATUS register after the last byte of CDB is + transferred for a PACKET command. For this kind of errors, + sense data should be acquired to gather information regarding + the errors. REQUEST SENSE packet command should be used to + acquire sense data. + + + + Once sense data is acquired, this type of errors can be + handled similary to other SCSI errors. Note that sense data + may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR + && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such + cases, the error should be considered as an ATA bus error and + handled according to . + + + + + + ATA device error (NCQ) + + + NCQ command error is indicated by cleared BSY and set ERR bit + during NCQ command phase (one or more NCQ commands + outstanding). Although STATUS and ERROR registers will + contain valid values describing the error, READ LOG EXT is + required to clear the error condition, determine which command + has failed and acquire more information. + + + + READ LOG EXT Log Page 10h reports which tag has failed and + taskfile register values describing the error. With this + information the failed command can be handled as a normal ATA + command error as in and all + other in-flight commands must be retried. Note that this + retry should not be counted - it's likely that commands + retried this way would have completed normally if it were not + for the failed command. + + + + Note that ATA bus errors can be reported as ATA device NCQ + errors. This should be handled as described in . + + + + If READ LOG EXT Log Page 10h fails or reports NQ, we're + thoroughly screwed. This condition should be treated + according to . + + + + + + ATA bus error + + + ATA bus error means that data corruption occurred during + transmission over ATA bus (SATA or PATA). This type of errors + can be indicated by + + + + + + + ICRC or ABRT error as described in . + + + + + + Controller-specific error completion with error information + indicating transmission error. + + + + + + On some controllers, command timeout. In this case, there may + be a mechanism to determine that the timeout is due to + transmission error. + + + + + + Unknown/random errors, timeouts and all sorts of weirdities. + + + + + + + As described above, transmission errors can cause wide variety + of symptoms ranging from device ICRC error to random device + lockup, and, for many cases, there is no way to tell if an + error condition is due to transmission error or not; + therefore, it's necessary to employ some kind of heuristic + when dealing with errors and timeouts. For example, + encountering repetitive ABRT errors for known supported + command is likely to indicate ATA bus error. + + + + Once it's determined that ATA bus errors have possibly + occurred, lowering ATA bus transmission speed is one of + actions which may alleviate the problem. See for more information. + + + + + + PCI bus error + + + Data corruption or other failures during transmission over PCI + (or other system bus). For standard BMDMA, this is indicated + by Error bit in the BMDMA Status register. This type of + errors must be logged as it indicates something is very wrong + with the system. Resetting host controller is recommended. + + + + + + Late completion + + + This occurs when timeout occurs and the timeout handler finds + out that the timed out command has completed successfully or + with error. This is usually caused by lost interrupts. This + type of errors must be logged. Resetting host controller is + recommended. + + + + + + Unknown error (timeout) + + + This is when timeout occurs and the command is still + processing or the host and device are in unknown state. When + this occurs, HSM could be in any valid or invalid state. To + bring the device to known state and make it forget about the + timed out command, resetting is necessary. The timed out + command may be retried. + + + + Timeouts can also be caused by transmission errors. Refer to + for more details. + + + + + + Hotplug and power management exceptions + + + <<TODO: fill here>> + + + + + + + + EH recovery actions + + + This section discusses several important recovery actions. + + + + Clearing error condition + + + Many controllers require its error registers to be cleared by + error handler. Different controllers may have different + requirements. + + + + For SATA, it's strongly recommended to clear at least SError + register during error handling. + + + + + Reset + + + During EH, resetting is necessary in the following cases. + + + + + + + HSM is in unknown or invalid state + + + + + + HBA is in unknown or invalid state + + + + + + EH needs to make HBA/device forget about in-flight commands + + + + + + HBA/device behaves weirdly + + + + + + + Resetting during EH might be a good idea regardless of error + condition to improve EH robustness. Whether to reset both or + either one of HBA and device depends on situation but the + following scheme is recommended. + + + + + + + When it's known that HBA is in ready state but ATA/ATAPI + device in in unknown state, reset only device. + + + + + + If HBA is in unknown state, reset both HBA and device. + + + + + + + HBA resetting is implementation specific. For a controller + complying to taskfile/BMDMA PCI IDE, stopping active DMA + transaction may be sufficient iff BMDMA state is the only HBA + context. But even mostly taskfile/BMDMA PCI IDE complying + controllers may have implementation specific requirements and + mechanism to reset themselves. This must be addressed by + specific drivers. + + + + OTOH, ATA/ATAPI standard describes in detail ways to reset + ATA/ATAPI devices. + + + + + PATA hardware reset + + + This is hardware initiated device reset signalled with + asserted PATA RESET- signal. There is no standard way to + initiate hardware reset from software although some + hardware provides registers that allow driver to directly + tweak the RESET- signal. + + + + + Software reset + + + This is achieved by turning CONTROL SRST bit on for at + least 5us. Both PATA and SATA support it but, in case of + SATA, this may require controller-specific support as the + second Register FIS to clear SRST should be transmitted + while BSY bit is still set. Note that on PATA, this resets + both master and slave devices on a channel. + + + + + EXECUTE DEVICE DIAGNOSTIC command + + + Although ATA/ATAPI standard doesn't describe exactly, EDD + implies some level of resetting, possibly similar level + with software reset. Host-side EDD protocol can be handled + with normal command processing and most SATA controllers + should be able to handle EDD's just like other commands. + As in software reset, EDD affects both devices on a PATA + bus. + + + Although EDD does reset devices, this doesn't suit error + handling as EDD cannot be issued while BSY is set and it's + unclear how it will act when device is in unknown/weird + state. + + + + + ATAPI DEVICE RESET command + + + This is very similar to software reset except that reset + can be restricted to the selected device without affecting + the other device sharing the cable. + + + + + SATA phy reset + + + This is the preferred way of resetting a SATA device. In + effect, it's identical to PATA hardware reset. Note that + this can be done with the standard SCR Control register. + As such, it's usually easier to implement than software + reset. + + + + + + + + One more thing to consider when resetting devices is that + resetting clears certain configuration parameters and they + need to be set to their previous or newly adjusted values + after reset. + + + + Parameters affected are. + + + + + + + CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used) + + + + + + Parameters set with SET FEATURES including transfer mode setting + + + + + + Block count set with SET MULTIPLE MODE + + + + + + Other parameters (SET MAX, MEDIA LOCK...) + + + + + + + ATA/ATAPI standard specifies that some parameters must be + maintained across hardware or software reset, but doesn't + strictly specify all of them. Always reconfiguring needed + parameters after reset is required for robustness. Note that + this also applies when resuming from deep sleep (power-off). + + + + Also, ATA/ATAPI standard requires that IDENTIFY DEVICE / + IDENTIFY PACKET DEVICE is issued after any configuration + parameter is updated or a hardware reset and the result used + for further operation. OS driver is required to implement + revalidation mechanism to support this. + + + + + + Reconfigure transport + + + For both PATA and SATA, a lot of corners are cut for cheap + connectors, cables or controllers and it's quite common to see + high transmission error rate. This can be mitigated by + lowering transmission speed. + + + + The following is a possible scheme Jeff Garzik suggested. + + +
+ + If more than $N (3?) transmission errors happen in 15 minutes, + + + + + if SATA, decrease SATA PHY speed. if speed cannot be decreased, + + + + + decrease UDMA xfer speed. if at UDMA0, switch to PIO4, + + + + + decrease PIO xfer speed. if at PIO3, complain, but continue + + + +
+ + + + + + + ata_piix Internals !Idrivers/scsi/ata_piix.c From 217df670d9a4da036d68b22500ac06128811d5c8 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Mon, 26 Sep 2005 16:11:50 -0700 Subject: [PATCH 030/101] [PATCH] fix bonding crash, remove old ABI support David S. Miller wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh Signed-off-by: Jeff Garzik --- drivers/net/bonding/bond_main.c | 280 ++++++++------------------------ drivers/net/bonding/bonding.h | 4 +- 2 files changed, 71 insertions(+), 213 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index bf81cd45e4d4..fd62e43a3510 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -487,6 +487,8 @@ * * Added xmit_hash_policy_layer34() * - Modified by Jay Vosburgh to also support mode 4. * Set version to 2.6.3. + * 2005/09/26 - Jay Vosburgh + * - Removed backwards compatibility for old ifenslaves. Version 2.6.4. */ //#define BONDING_DEBUG 1 @@ -595,14 +597,7 @@ static int arp_ip_count = 0; static int bond_mode = BOND_MODE_ROUNDROBIN; static int xmit_hashtype= BOND_XMIT_POLICY_LAYER2; static int lacp_fast = 0; -static int app_abi_ver = 0; -static int orig_app_abi_ver = -1; /* This is used to save the first ABI version - * we receive from the application. Once set, - * it won't be changed, and the module will - * refuse to enslave/release interfaces if the - * command comes from an application using - * another ABI version. - */ + struct bond_parm_tbl { char *modename; int mode; @@ -1702,51 +1697,29 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de } } - if (app_abi_ver >= 1) { - /* The application is using an ABI, which requires the - * slave interface to be closed. - */ - if ((slave_dev->flags & IFF_UP)) { - printk(KERN_ERR DRV_NAME - ": Error: %s is up\n", - slave_dev->name); - res = -EPERM; - goto err_undo_flags; - } + /* + * Old ifenslave binaries are no longer supported. These can + * be identified with moderate accurary by the state of the slave: + * the current ifenslave will set the interface down prior to + * enslaving it; the old ifenslave will not. + */ + if ((slave_dev->flags & IFF_UP)) { + printk(KERN_ERR DRV_NAME ": %s is up. " + "This may be due to an out of date ifenslave.\n", + slave_dev->name); + res = -EPERM; + goto err_undo_flags; + } - if (slave_dev->set_mac_address == NULL) { - printk(KERN_ERR DRV_NAME - ": Error: The slave device you specified does " - "not support setting the MAC address.\n"); - printk(KERN_ERR - "Your kernel likely does not support slave " - "devices.\n"); + if (slave_dev->set_mac_address == NULL) { + printk(KERN_ERR DRV_NAME + ": Error: The slave device you specified does " + "not support setting the MAC address.\n"); + printk(KERN_ERR + "Your kernel likely does not support slave devices.\n"); - res = -EOPNOTSUPP; - goto err_undo_flags; - } - } else { - /* The application is not using an ABI, which requires the - * slave interface to be open. - */ - if (!(slave_dev->flags & IFF_UP)) { - printk(KERN_ERR DRV_NAME - ": Error: %s is not running\n", - slave_dev->name); - res = -EINVAL; - goto err_undo_flags; - } - - if ((bond->params.mode == BOND_MODE_8023AD) || - (bond->params.mode == BOND_MODE_TLB) || - (bond->params.mode == BOND_MODE_ALB)) { - printk(KERN_ERR DRV_NAME - ": Error: to use %s mode, you must upgrade " - "ifenslave.\n", - bond_mode_name(bond->params.mode)); - res = -EOPNOTSUPP; - goto err_undo_flags; - } + res = -EOPNOTSUPP; + goto err_undo_flags; } new_slave = kmalloc(sizeof(struct slave), GFP_KERNEL); @@ -1762,41 +1735,36 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de */ new_slave->original_flags = slave_dev->flags; - if (app_abi_ver >= 1) { - /* save slave's original ("permanent") mac address for - * modes that needs it, and for restoring it upon release, - * and then set it to the master's address - */ - memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); + /* + * Save slave's original ("permanent") mac address for modes + * that need it, and for restoring it upon release, and then + * set it to the master's address + */ + memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); - /* set slave to master's mac address - * The application already set the master's - * mac address to that of the first slave - */ - memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len); - addr.sa_family = slave_dev->type; - res = dev_set_mac_address(slave_dev, &addr); - if (res) { - dprintk("Error %d calling set_mac_address\n", res); - goto err_free; - } + /* + * Set slave to master's mac address. The application already + * set the master's mac address to that of the first slave + */ + memcpy(addr.sa_data, bond_dev->dev_addr, bond_dev->addr_len); + addr.sa_family = slave_dev->type; + res = dev_set_mac_address(slave_dev, &addr); + if (res) { + dprintk("Error %d calling set_mac_address\n", res); + goto err_free; + } - /* open the slave since the application closed it */ - res = dev_open(slave_dev); - if (res) { - dprintk("Openning slave %s failed\n", slave_dev->name); - goto err_restore_mac; - } + /* open the slave since the application closed it */ + res = dev_open(slave_dev); + if (res) { + dprintk("Openning slave %s failed\n", slave_dev->name); + goto err_restore_mac; } res = netdev_set_master(slave_dev, bond_dev); if (res) { dprintk("Error %d calling netdev_set_master\n", res); - if (app_abi_ver < 1) { - goto err_free; - } else { - goto err_close; - } + goto err_close; } new_slave->dev = slave_dev; @@ -1997,39 +1965,6 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de write_unlock_bh(&bond->lock); - if (app_abi_ver < 1) { - /* - * !!! This is to support old versions of ifenslave. - * We can remove this in 2.5 because our ifenslave takes - * care of this for us. - * We check to see if the master has a mac address yet. - * If not, we'll give it the mac address of our slave device. - */ - int ndx = 0; - - for (ndx = 0; ndx < bond_dev->addr_len; ndx++) { - dprintk("Checking ndx=%d of bond_dev->dev_addr\n", - ndx); - if (bond_dev->dev_addr[ndx] != 0) { - dprintk("Found non-zero byte at ndx=%d\n", - ndx); - break; - } - } - - if (ndx == bond_dev->addr_len) { - /* - * We got all the way through the address and it was - * all 0's. - */ - dprintk("%s doesn't have a MAC address yet. \n", - bond_dev->name); - dprintk("Going to give assign it from %s.\n", - slave_dev->name); - bond_sethwaddr(bond_dev, slave_dev); - } - } - printk(KERN_INFO DRV_NAME ": %s: enslaving %s as a%s interface with a%s link.\n", bond_dev->name, slave_dev->name, @@ -2227,12 +2162,10 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de /* close slave before restoring its mac address */ dev_close(slave_dev); - if (app_abi_ver >= 1) { - /* restore original ("permanent") mac address */ - memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); - addr.sa_family = slave_dev->type; - dev_set_mac_address(slave_dev, &addr); - } + /* restore original ("permanent") mac address */ + memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); + addr.sa_family = slave_dev->type; + dev_set_mac_address(slave_dev, &addr); /* restore the original state of the * IFF_NOARP flag that might have been @@ -2320,12 +2253,10 @@ static int bond_release_all(struct net_device *bond_dev) /* close slave before restoring its mac address */ dev_close(slave_dev); - if (app_abi_ver >= 1) { - /* restore original ("permanent") mac address*/ - memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); - addr.sa_family = slave_dev->type; - dev_set_mac_address(slave_dev, &addr); - } + /* restore original ("permanent") mac address*/ + memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); + addr.sa_family = slave_dev->type; + dev_set_mac_address(slave_dev, &addr); /* restore the original state of the IFF_NOARP flag that might have * been set by bond_set_slave_inactive_flags() @@ -2423,57 +2354,6 @@ static int bond_ioctl_change_active(struct net_device *bond_dev, struct net_devi return res; } -static int bond_ethtool_ioctl(struct net_device *bond_dev, struct ifreq *ifr) -{ - struct ethtool_drvinfo info; - void __user *addr = ifr->ifr_data; - uint32_t cmd; - - if (get_user(cmd, (uint32_t __user *)addr)) { - return -EFAULT; - } - - switch (cmd) { - case ETHTOOL_GDRVINFO: - if (copy_from_user(&info, addr, sizeof(info))) { - return -EFAULT; - } - - if (strcmp(info.driver, "ifenslave") == 0) { - int new_abi_ver; - char *endptr; - - new_abi_ver = simple_strtoul(info.fw_version, - &endptr, 0); - if (*endptr) { - printk(KERN_ERR DRV_NAME - ": Error: got invalid ABI " - "version from application\n"); - - return -EINVAL; - } - - if (orig_app_abi_ver == -1) { - orig_app_abi_ver = new_abi_ver; - } - - app_abi_ver = new_abi_ver; - } - - strncpy(info.driver, DRV_NAME, 32); - strncpy(info.version, DRV_VERSION, 32); - snprintf(info.fw_version, 32, "%d", BOND_ABI_VERSION); - - if (copy_to_user(addr, &info, sizeof(info))) { - return -EFAULT; - } - - return 0; - default: - return -EOPNOTSUPP; - } -} - static int bond_info_query(struct net_device *bond_dev, struct ifbond *info) { struct bonding *bond = bond_dev->priv; @@ -3442,16 +3322,11 @@ static void bond_info_show_slave(struct seq_file *seq, const struct slave *slave seq_printf(seq, "Link Failure Count: %d\n", slave->link_failure_count); - if (app_abi_ver >= 1) { - seq_printf(seq, - "Permanent HW addr: %02x:%02x:%02x:%02x:%02x:%02x\n", - slave->perm_hwaddr[0], - slave->perm_hwaddr[1], - slave->perm_hwaddr[2], - slave->perm_hwaddr[3], - slave->perm_hwaddr[4], - slave->perm_hwaddr[5]); - } + seq_printf(seq, + "Permanent HW addr: %02x:%02x:%02x:%02x:%02x:%02x\n", + slave->perm_hwaddr[0], slave->perm_hwaddr[1], + slave->perm_hwaddr[2], slave->perm_hwaddr[3], + slave->perm_hwaddr[4], slave->perm_hwaddr[5]); if (bond->params.mode == BOND_MODE_8023AD) { const struct aggregator *agg @@ -4010,15 +3885,12 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd struct ifslave k_sinfo; struct ifslave __user *u_sinfo = NULL; struct mii_ioctl_data *mii = NULL; - int prev_abi_ver = orig_app_abi_ver; int res = 0; dprintk("bond_ioctl: master=%s, cmd=%d\n", bond_dev->name, cmd); switch (cmd) { - case SIOCETHTOOL: - return bond_ethtool_ioctl(bond_dev, ifr); case SIOCGMIIPHY: mii = if_mii(ifr); if (!mii) { @@ -4090,21 +3962,6 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd return -EPERM; } - if (orig_app_abi_ver == -1) { - /* no orig_app_abi_ver was provided yet, so we'll use the - * current one from now on, even if it's 0 - */ - orig_app_abi_ver = app_abi_ver; - - } else if (orig_app_abi_ver != app_abi_ver) { - printk(KERN_ERR DRV_NAME - ": Error: already using ifenslave ABI version %d; to " - "upgrade ifenslave to version %d, you must first " - "reload bonding.\n", - orig_app_abi_ver, app_abi_ver); - return -EINVAL; - } - slave_dev = dev_get_by_name(ifr->ifr_slave); dprintk("slave_dev=%p: \n", slave_dev); @@ -4137,14 +3994,6 @@ static int bond_do_ioctl(struct net_device *bond_dev, struct ifreq *ifr, int cmd dev_put(slave_dev); } - if (res < 0) { - /* The ioctl failed, so there's no point in changing the - * orig_app_abi_ver. We'll restore it's value just in case - * we've changed it earlier in this function. - */ - orig_app_abi_ver = prev_abi_ver; - } - return res; } @@ -4578,9 +4427,18 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode) } } +static void bond_ethtool_get_drvinfo(struct net_device *bond_dev, + struct ethtool_drvinfo *drvinfo) +{ + strncpy(drvinfo->driver, DRV_NAME, 32); + strncpy(drvinfo->version, DRV_VERSION, 32); + snprintf(drvinfo->fw_version, 32, "%d", BOND_ABI_VERSION); +} + static struct ethtool_ops bond_ethtool_ops = { .get_tx_csum = ethtool_op_get_tx_csum, .get_sg = ethtool_op_get_sg, + .get_drvinfo = bond_ethtool_get_drvinfo, }; /* diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h index 388196980862..bbf9da8af624 100644 --- a/drivers/net/bonding/bonding.h +++ b/drivers/net/bonding/bonding.h @@ -40,8 +40,8 @@ #include "bond_3ad.h" #include "bond_alb.h" -#define DRV_VERSION "2.6.3" -#define DRV_RELDATE "June 8, 2005" +#define DRV_VERSION "2.6.4" +#define DRV_RELDATE "September 26, 2005" #define DRV_NAME "bonding" #define DRV_DESCRIPTION "Ethernet Channel Bonding Driver" From 32b5bfab9a09b19ea9a7d902b249ebf311fd2999 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 22 Sep 2005 11:09:44 +0200 Subject: [PATCH 031/101] [PATCH] tulip DC21143 rev 48 10Mbit HDX fix The patch below is necessary to allow my Digital DS21143 Tulip rev 48 ethernet interface to work in a 10Mbit Half Duplex network. Without it, the driver keeps retrying other modes in an endless loop. It seems like someone already had the same problem with a rev 65 board :) Signed-off-by: Philippe De Muyter Signed-off-by: Jeff Garzik --- drivers/net/tulip/21142.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/tulip/21142.c b/drivers/net/tulip/21142.c index 5db694c4eb02..683f14b01c06 100644 --- a/drivers/net/tulip/21142.c +++ b/drivers/net/tulip/21142.c @@ -172,7 +172,7 @@ void t21142_lnk_change(struct net_device *dev, int csr5) int i; for (i = 0; i < tp->mtable->leafcount; i++) if (tp->mtable->mleaf[i].media == dev->if_port) { - int startup = ! ((tp->chip_id == DC21143 && tp->revision == 65)); + int startup = ! ((tp->chip_id == DC21143 && (tp->revision == 48 || tp->revision == 65))); tp->cur_index = i; tulip_select_media(dev, startup); setup_done = 1; From 49a9db07abd4ac89693dbd4dcd92fcd1f30ece00 Mon Sep 17 00:00:00 2001 From: Wade Farnsworth Date: Mon, 3 Oct 2005 22:21:33 -0400 Subject: [PATCH 032/101] [PATCH] emac: add support for platform-specific unsupported PHY features This patch adds support to the ibm_emac driver for platform-specific unsupported PHY features. The patch attempts to determine the highest speed and duplex when autonegotiation is unsupported. Signed-off-by: Wade Farnsworth Signed-off-by: Jeff Garzik --- drivers/net/ibm_emac/ibm_emac_core.c | 31 ++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index 0de3bb906174..14e9b6315f20 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1875,6 +1875,9 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) rc = -ENODEV; goto bail; } + + /* Disable any PHY features not supported by the platform */ + ep->phy_mii.def->features &= ~emacdata->phy_feat_exc; /* Setup initial PHY config & startup aneg */ if (ep->phy_mii.def->ops->init) @@ -1882,6 +1885,34 @@ static int emac_init_device(struct ocp_device *ocpdev, struct ibm_ocp_mal *mal) netif_carrier_off(ndev); if (ep->phy_mii.def->features & SUPPORTED_Autoneg) ep->want_autoneg = 1; + else { + ep->want_autoneg = 0; + + /* Select highest supported speed/duplex */ + if (ep->phy_mii.def->features & SUPPORTED_1000baseT_Full) { + ep->phy_mii.speed = SPEED_1000; + ep->phy_mii.duplex = DUPLEX_FULL; + } else if (ep->phy_mii.def->features & + SUPPORTED_1000baseT_Half) { + ep->phy_mii.speed = SPEED_1000; + ep->phy_mii.duplex = DUPLEX_HALF; + } else if (ep->phy_mii.def->features & + SUPPORTED_100baseT_Full) { + ep->phy_mii.speed = SPEED_100; + ep->phy_mii.duplex = DUPLEX_FULL; + } else if (ep->phy_mii.def->features & + SUPPORTED_100baseT_Half) { + ep->phy_mii.speed = SPEED_100; + ep->phy_mii.duplex = DUPLEX_HALF; + } else if (ep->phy_mii.def->features & + SUPPORTED_10baseT_Full) { + ep->phy_mii.speed = SPEED_10; + ep->phy_mii.duplex = DUPLEX_FULL; + } else { + ep->phy_mii.speed = SPEED_10; + ep->phy_mii.duplex = DUPLEX_HALF; + } + } emac_start_link(ep, NULL); /* read the MAC Address */ From 32fa2bfcf882f8901ca206e33b0d8975cc8e89a2 Mon Sep 17 00:00:00 2001 From: Grant Coady Date: Sat, 10 Sep 2005 00:14:05 +1000 Subject: [PATCH 033/101] [PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORT This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady Signed-off-by: Jeff Garzik --- drivers/net/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 2a908c4690a7..c748b0e16419 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1655,7 +1655,7 @@ config LAN_SAA9730 config NET_POCKET bool "Pocket and portable adapters" - depends on NET_ETHERNET && ISA + depends on NET_ETHERNET && PARPORT ---help--- Cute little network (Ethernet) devices which attach to the parallel port ("pocket adapters"), commonly used with laptops. If you have @@ -1679,7 +1679,7 @@ config NET_POCKET config ATP tristate "AT-LAN-TEC/RealTek pocket adapter support" - depends on NET_POCKET && ISA && X86 + depends on NET_POCKET && PARPORT && X86 select CRC32 ---help--- This is a network (Ethernet) device which attaches to your parallel @@ -1694,7 +1694,7 @@ config ATP config DE600 tristate "D-Link DE600 pocket adapter support" - depends on NET_POCKET && ISA + depends on NET_POCKET && PARPORT ---help--- This is a network (Ethernet) device which attaches to your parallel port. Read as well as the @@ -1709,7 +1709,7 @@ config DE600 config DE620 tristate "D-Link DE620 pocket adapter support" - depends on NET_POCKET && ISA + depends on NET_POCKET && PARPORT ---help--- This is a network (Ethernet) device which attaches to your parallel port. Read as well as the From 67974231d4354fe26aaa39a3153b5c0945b94858 Mon Sep 17 00:00:00 2001 From: Ion Badulescu Date: Mon, 3 Oct 2005 22:31:36 -0400 Subject: [PATCH 034/101] [netdrvr starfire] fix highmem and broken firmware issues Unfortunately, [your patch] might address the crash but doesn't address the real problem. It turns out that the problem is one of padding (the firmware cksum engine works only on 32-bit chunks, yuck), so the special casing for length == 1 wasn't sufficient anyway. This patch addresses the issue, as well the other issue of i386 + CONFIG_HIGHMEM being broken. It is pretty much the same workaround that Adaptec themselves used in their Windows driver. I have yet to check if it fixes the problem when the skb is non-linear, but this patch _will_ solve the problem for 99% of the users out there (those not using sendfile). Signed-off-by: Ion Badulescu Signed-off-by: Jeff Garzik --- drivers/net/starfire.c | 46 ++++++++++++++++++++++-------------------- 1 file changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 88b89dc95c77..efdb179ecc8c 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -133,14 +133,18 @@ - finally added firmware (GPL'ed by Adaptec) - removed compatibility code for 2.2.x + LK1.4.2.1 (Ion Badulescu) + - fixed 32/64 bit issues on i386 + CONFIG_HIGHMEM + - added 32-bit padding to outgoing skb's, removed previous workaround + TODO: - fix forced speed/duplexing code (broken a long time ago, when somebody converted the driver to use the generic MII code) - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.2" -#define DRV_RELDATE "January 19, 2005" +#define DRV_VERSION "1.03+LK1.4.2.1" +#define DRV_RELDATE "October 3, 2005" #include #include @@ -165,6 +169,14 @@ TODO: - fix forced speed/duplexing code (broken a long time ago, when * of length 1. If and when this is fixed, the #define below can be removed. */ #define HAS_BROKEN_FIRMWARE + +/* + * If using the broken firmware, data must be padded to the next 32-bit boundary. + */ +#ifdef HAS_BROKEN_FIRMWARE +#define PADDING_MASK 3 +#endif + /* * Define this if using the driver with the zero-copy patch */ @@ -257,9 +269,10 @@ static int full_duplex[MAX_UNITS] = {0, }; * This SUCKS. * We need a much better method to determine if dma_addr_t is 64-bit. */ -#if (defined(__i386__) && defined(CONFIG_HIGHMEM) && (LINUX_VERSION_CODE > 0x20500 || defined(CONFIG_HIGHMEM64G))) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) +#if (defined(__i386__) && defined(CONFIG_HIGHMEM64G)) || defined(__x86_64__) || defined (__ia64__) || defined(__mips64__) || (defined(__mips__) && defined(CONFIG_HIGHMEM) && defined(CONFIG_64BIT_PHYS_ADDR)) /* 64-bit dma_addr_t */ #define ADDR_64BITS /* This chip uses 64 bit addresses. */ +#define netdrv_addr_t u64 #define cpu_to_dma(x) cpu_to_le64(x) #define dma_to_cpu(x) le64_to_cpu(x) #define RX_DESC_Q_ADDR_SIZE RxDescQAddr64bit @@ -268,6 +281,7 @@ static int full_duplex[MAX_UNITS] = {0, }; #define TX_COMPL_Q_ADDR_SIZE TxComplQAddr64bit #define RX_DESC_ADDR_SIZE RxDescAddr64bit #else /* 32-bit dma_addr_t */ +#define netdrv_addr_t u32 #define cpu_to_dma(x) cpu_to_le32(x) #define dma_to_cpu(x) le32_to_cpu(x) #define RX_DESC_Q_ADDR_SIZE RxDescQAddr32bit @@ -1333,21 +1347,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) } #if defined(ZEROCOPY) && defined(HAS_BROKEN_FIRMWARE) - { - int has_bad_length = 0; - - if (skb_first_frag_len(skb) == 1) - has_bad_length = 1; - else { - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) - if (skb_shinfo(skb)->frags[i].size == 1) { - has_bad_length = 1; - break; - } - } - - if (has_bad_length) - skb_checksum_help(skb, 0); + if (skb->ip_summed == CHECKSUM_HW) { + skb = skb_padto(skb, (skb->len + PADDING_MASK) & ~PADDING_MASK); + if (skb == NULL) + return NETDEV_TX_OK; } #endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ @@ -2127,13 +2130,12 @@ static int __init starfire_init (void) #endif #endif -#ifndef ADDR_64BITS /* we can do this test only at run-time... sigh */ - if (sizeof(dma_addr_t) == sizeof(u64)) { - printk("This driver has not been ported to this 64-bit architecture yet\n"); + if (sizeof(dma_addr_t) != sizeof(netdrv_addr_t)) { + printk("This driver has dma_addr_t issues, please send email to maintainer\n"); return -ENODEV; } -#endif /* not ADDR_64BITS */ + return pci_module_init (&starfire_driver); } From f36a29d5672c7698ffe55c7c05107ae77fa698cc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 3 Oct 2005 21:24:45 -0700 Subject: [PATCH 035/101] [PATCH] ieee80211: fix gfp flags type Fix implicit nocast warnings in ieee80211 code, including __nocast: net/ieee80211/ieee80211_tx.c:215:9: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- net/ieee80211/ieee80211_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ieee80211/ieee80211_tx.c b/net/ieee80211/ieee80211_tx.c index f9153671168e..ecdf9f7a538f 100644 --- a/net/ieee80211/ieee80211_tx.c +++ b/net/ieee80211/ieee80211_tx.c @@ -207,7 +207,7 @@ void ieee80211_txb_free(struct ieee80211_txb *txb) } static struct ieee80211_txb *ieee80211_alloc_txb(int nr_frags, int txb_size, - unsigned int gfp_mask) + unsigned int __nocast gfp_mask) { struct ieee80211_txb *txb; int i; From 81c58732277654a51bb52832e1bc74234bb977bc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 3 Oct 2005 21:24:36 -0700 Subject: [PATCH 036/101] [PATCH] ns83820: fix gfp flags type Fix implicit nocast warnings in ns83820 code, including __nocast: drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/net/ns83820.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 1d123d2b53fd..83334db2921c 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -584,7 +584,7 @@ static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) return 0; } -static inline int rx_refill(struct net_device *ndev, unsigned int gfp) +static inline int rx_refill(struct net_device *ndev, unsigned int __nocast gfp) { struct ns83820 *dev = PRIV(ndev); unsigned i; From 832f8f0378ff1566f2a222352c7ad5df3f8d0d9d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 00:41:22 -0700 Subject: [PATCH 037/101] [PATCH] sungem: fix gfp flags type Fix nocast sparse warnings in sungen: drivers/net/sungem.h:1040:45: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik --- drivers/net/sungem.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/sungem.h b/drivers/net/sungem.h index ff8ae5f79970..16edbb1a4a7a 100644 --- a/drivers/net/sungem.h +++ b/drivers/net/sungem.h @@ -1035,7 +1035,8 @@ struct gem { #define ALIGNED_RX_SKB_ADDR(addr) \ ((((unsigned long)(addr) + (64UL - 1UL)) & ~(64UL - 1UL)) - (unsigned long)(addr)) -static __inline__ struct sk_buff *gem_alloc_skb(int size, int gfp_flags) +static __inline__ struct sk_buff *gem_alloc_skb(int size, + unsigned int __nocast gfp_flags) { struct sk_buff *skb = alloc_skb(size + 64, gfp_flags); From 18efefa9355119b4f6d9b73b074ebbf9882c37c3 Mon Sep 17 00:00:00 2001 From: Anton Altaparmakov Date: Tue, 4 Oct 2005 13:06:00 +0100 Subject: [PATCH 038/101] NTFS: Fix a stupid bug in __ntfs_bitmap_set_bits_in_run() which caused the count to become negative and hence we had a wild memset() scribbling all over the system's ram. Signed-off-by: Anton Altaparmakov --- fs/ntfs/ChangeLog | 3 +++ fs/ntfs/bitmap.c | 5 +++-- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/ntfs/ChangeLog b/fs/ntfs/ChangeLog index 83f3322765cd..de58579a1d0e 100644 --- a/fs/ntfs/ChangeLog +++ b/fs/ntfs/ChangeLog @@ -102,6 +102,9 @@ ToDo/Notes: inode instead of a vfs inode as parameter. - Fix the definition of the CHKD ntfs record magic. It had an off by two error causing it to be CHKB instead of CHKD. + - Fix a stupid bug in __ntfs_bitmap_set_bits_in_run() which caused the + count to become negative and hence we had a wild memset() scribbling + all over the system's ram. 2.1.23 - Implement extension of resident files and make writing safe as well as many bug fixes, cleanups, and enhancements... diff --git a/fs/ntfs/bitmap.c b/fs/ntfs/bitmap.c index 12cf2e30c7dd..7a190cdc60e2 100644 --- a/fs/ntfs/bitmap.c +++ b/fs/ntfs/bitmap.c @@ -1,7 +1,7 @@ /* * bitmap.c - NTFS kernel bitmap handling. Part of the Linux-NTFS project. * - * Copyright (c) 2004 Anton Altaparmakov + * Copyright (c) 2004-2005 Anton Altaparmakov * * This program/include file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as published @@ -90,7 +90,8 @@ int __ntfs_bitmap_set_bits_in_run(struct inode *vi, const s64 start_bit, /* If the first byte is partial, modify the appropriate bits in it. */ if (bit) { u8 *byte = kaddr + pos; - while ((bit & 7) && cnt--) { + while ((bit & 7) && cnt) { + cnt--; if (value) *byte |= 1 << bit++; else From c394e458b69632902d65f9e2f39df79314f72908 Mon Sep 17 00:00:00 2001 From: Anton Altaparmakov Date: Tue, 4 Oct 2005 13:08:53 +0100 Subject: [PATCH 039/101] NTFS: Fix a 64-bitness bug where a left-shift could overflow a 32-bit variable which we now cast to 64-bit first (fs/ntfs/mft.c::map_mft_record_page(). Signed-off-by: Anton Altaparmakov --- fs/ntfs/layout.h | 2 +- fs/ntfs/mft.c | 3 ++- fs/ntfs/unistr.c | 2 +- 3 files changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/ntfs/layout.h b/fs/ntfs/layout.h index 01f2dfa39cec..5c248d404f05 100644 --- a/fs/ntfs/layout.h +++ b/fs/ntfs/layout.h @@ -309,7 +309,7 @@ typedef le16 MFT_RECORD_FLAGS; * Note: The _LE versions will return a CPU endian formatted value! */ #define MFT_REF_MASK_CPU 0x0000ffffffffffffULL -#define MFT_REF_MASK_LE const_cpu_to_le64(0x0000ffffffffffffULL) +#define MFT_REF_MASK_LE const_cpu_to_le64(MFT_REF_MASK_CPU) typedef u64 MFT_REF; typedef le64 leMFT_REF; diff --git a/fs/ntfs/mft.c b/fs/ntfs/mft.c index 247586d1d5dc..b011369b5956 100644 --- a/fs/ntfs/mft.c +++ b/fs/ntfs/mft.c @@ -58,7 +58,8 @@ static inline MFT_RECORD *map_mft_record_page(ntfs_inode *ni) * overflowing the unsigned long, but I don't think we would ever get * here if the volume was that big... */ - index = ni->mft_no << vol->mft_record_size_bits >> PAGE_CACHE_SHIFT; + index = (u64)ni->mft_no << vol->mft_record_size_bits >> + PAGE_CACHE_SHIFT; ofs = (ni->mft_no << vol->mft_record_size_bits) & ~PAGE_CACHE_MASK; i_size = i_size_read(mft_vi); diff --git a/fs/ntfs/unistr.c b/fs/ntfs/unistr.c index a389a5a16c84..0ea887fc859c 100644 --- a/fs/ntfs/unistr.c +++ b/fs/ntfs/unistr.c @@ -1,7 +1,7 @@ /* * unistr.c - NTFS Unicode string handling. Part of the Linux-NTFS project. * - * Copyright (c) 2001-2004 Anton Altaparmakov + * Copyright (c) 2001-2005 Anton Altaparmakov * * This program/include file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as published From 47a8659380d40d5c0786ddb62a89b3f7f1392430 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Oct 2005 08:09:19 -0400 Subject: [PATCH 040/101] libata: bitmask based pci init functions for one or two ports This redoes the n_ports logic I proposed before as a bitmask. ata_pci_init_native_mode is now used with a mask allowing for mixed mode stuff later on. ata_pci_init_legacy_port is called with port number and does one port now not two. Instead it is called twice by the ata init logic which cleans both of them up. There are stil limits in the original code left over - IRQ/port mapping for legacy mode should be arch specific values - You can have one legacy mode IDE adapter per PCI root bridge on some systems - Doesn't handle mixed mode devices yet (but is now a lot closer to it) --- drivers/scsi/libata-core.c | 131 +++++++++++++++++++++---------------- drivers/scsi/sata_nv.c | 2 +- drivers/scsi/sata_sis.c | 2 +- drivers/scsi/sata_uli.c | 2 +- drivers/scsi/sata_via.c | 2 +- include/linux/libata.h | 6 +- 6 files changed, 84 insertions(+), 61 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 03d422e99e58..82ec7f30bf3f 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -4363,85 +4363,87 @@ void ata_pci_host_stop (struct ata_host_set *host_set) * ata_pci_init_native_mode - Initialize native-mode driver * @pdev: pci device to be initialized * @port: array[2] of pointers to port info structures. + * @ports: bitmap of ports present * * Utility function which allocates and initializes an * ata_probe_ent structure for a standard dual-port * PIO-based IDE controller. The returned ata_probe_ent * structure can be passed to ata_device_add(). The returned * ata_probe_ent structure should then be freed with kfree(). + * + * The caller need only pass the address of the primary port, the + * secondary will be deduced automatically. If the device has non + * standard secondary port mappings this function can be called twice, + * once for each interface. */ struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port) +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int ports) { struct ata_probe_ent *probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); + int p = 0; + if (!probe_ent) return NULL; - probe_ent->n_ports = 2; probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; - probe_ent->port[0].cmd_addr = pci_resource_start(pdev, 0); - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = - pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); + if (ports & ATA_PORT_PRIMARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 0); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 1) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4); + ata_std_ports(&probe_ent->port[p]); + p++; + } - probe_ent->port[1].cmd_addr = pci_resource_start(pdev, 2); - probe_ent->port[1].altstatus_addr = - probe_ent->port[1].ctl_addr = - pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; - probe_ent->port[1].bmdma_addr = pci_resource_start(pdev, 4) + 8; - - ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent->port[1]); + if (ports & ATA_PORT_SECONDARY) { + probe_ent->port[p].cmd_addr = pci_resource_start(pdev, 2); + probe_ent->port[p].altstatus_addr = + probe_ent->port[p].ctl_addr = + pci_resource_start(pdev, 3) | ATA_PCI_CTL_OFS; + probe_ent->port[p].bmdma_addr = pci_resource_start(pdev, 4) + 8; + ata_std_ports(&probe_ent->port[p]); + p++; + } + probe_ent->n_ports = p; return probe_ent; } -static struct ata_probe_ent * -ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, - struct ata_probe_ent **ppe2) +static struct ata_probe_ent *ata_pci_init_legacy_port(struct pci_dev *pdev, struct ata_port_info **port, int port_num) { - struct ata_probe_ent *probe_ent, *probe_ent2; + struct ata_probe_ent *probe_ent; probe_ent = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[0]); if (!probe_ent) return NULL; - probe_ent2 = ata_probe_ent_alloc(pci_dev_to_dev(pdev), port[1]); - if (!probe_ent2) { - kfree(probe_ent); - return NULL; - } - probe_ent->n_ports = 1; - probe_ent->irq = 14; - - probe_ent->hard_port_no = 0; + probe_ent->legacy_mode = 1; + probe_ent->n_ports = 1; + probe_ent->hard_port_no = port_num; - probe_ent2->n_ports = 1; - probe_ent2->irq = 15; - - probe_ent2->hard_port_no = 1; - probe_ent2->legacy_mode = 1; - - probe_ent->port[0].cmd_addr = 0x1f0; - probe_ent->port[0].altstatus_addr = - probe_ent->port[0].ctl_addr = 0x3f6; - probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4); - - probe_ent2->port[0].cmd_addr = 0x170; - probe_ent2->port[0].altstatus_addr = - probe_ent2->port[0].ctl_addr = 0x376; - probe_ent2->port[0].bmdma_addr = pci_resource_start(pdev, 4)+8; - + switch(port_num) + { + case 0: + probe_ent->irq = 14; + probe_ent->port[0].cmd_addr = 0x1f0; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x3f6; + break; + case 1: + probe_ent->irq = 15; + probe_ent->port[0].cmd_addr = 0x170; + probe_ent->port[0].altstatus_addr = + probe_ent->port[0].ctl_addr = 0x376; + break; + } + probe_ent->port[0].bmdma_addr = pci_resource_start(pdev, 4) + 8 * port_num; ata_std_ports(&probe_ent->port[0]); - ata_std_ports(&probe_ent2->port[0]); - - *ppe2 = probe_ent2; return probe_ent; } @@ -4470,7 +4472,7 @@ ata_pci_init_legacy_mode(struct pci_dev *pdev, struct ata_port_info **port, int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { - struct ata_probe_ent *probe_ent, *probe_ent2 = NULL; + struct ata_probe_ent *probe_ent = NULL, *probe_ent2 = NULL; struct ata_port_info *port[2]; u8 tmp8, mask; unsigned int legacy_mode = 0; @@ -4487,7 +4489,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, if ((port[0]->host_flags & ATA_FLAG_NO_LEGACY) == 0 && (pdev->class >> 8) == PCI_CLASS_STORAGE_IDE) { - /* TODO: support transitioning to native mode? */ + /* TODO: What if one channel is in native mode ... */ pci_read_config_byte(pdev, PCI_CLASS_PROG, &tmp8); mask = (1 << 2) | (1 << 0); if ((tmp8 & mask) != mask) @@ -4495,11 +4497,20 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, } /* FIXME... */ - if ((!legacy_mode) && (n_ports > 1)) { - printk(KERN_ERR "ata: BUG: native mode, n_ports > 1\n"); - return -EINVAL; + if ((!legacy_mode) && (n_ports > 2)) { + printk(KERN_ERR "ata: BUG: native mode, n_ports > 2\n"); + n_ports = 2; + /* For now */ } + /* FIXME: Really for ATA it isn't safe because the device may be + multi-purpose and we want to leave it alone if it was already + enabled. Secondly for shared use as Arjan says we want refcounting + + Checking dev->is_enabled is insufficient as this is not set at + boot for the primary video which is BIOS enabled + */ + rc = pci_enable_device(pdev); if (rc) return rc; @@ -4510,6 +4521,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out; } + /* FIXME: Should use platform specific mappers for legacy port ranges */ if (legacy_mode) { if (!request_region(0x1f0, 8, "libata")) { struct resource *conflict, res; @@ -4554,10 +4566,17 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, goto err_out_regions; if (legacy_mode) { - probe_ent = ata_pci_init_legacy_mode(pdev, port, &probe_ent2); - } else - probe_ent = ata_pci_init_native_mode(pdev, port); - if (!probe_ent) { + if (legacy_mode & (1 << 0)) + probe_ent = ata_pci_init_legacy_port(pdev, port, 0); + if (legacy_mode & (1 << 1)) + probe_ent2 = ata_pci_init_legacy_port(pdev, port, 1); + } else { + if (n_ports == 2) + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); + else + probe_ent = ata_pci_init_native_mode(pdev, port, ATA_PORT_PRIMARY); + } + if (!probe_ent && !probe_ent2) { rc = -ENOMEM; goto err_out_regions; } diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index c05653c7779d..749ff92d8c63 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -405,7 +405,7 @@ static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) rc = -ENOMEM; ppi = &nv_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) goto err_out_regions; diff --git a/drivers/scsi/sata_sis.c b/drivers/scsi/sata_sis.c index b227e51d12f4..0761a3234fcf 100644 --- a/drivers/scsi/sata_sis.c +++ b/drivers/scsi/sata_sis.c @@ -263,7 +263,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &sis_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_uli.c b/drivers/scsi/sata_uli.c index 4c9fb8b71be1..9c06f2abe7f7 100644 --- a/drivers/scsi/sata_uli.c +++ b/drivers/scsi/sata_uli.c @@ -202,7 +202,7 @@ static int uli_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_regions; ppi = &uli_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) { rc = -ENOMEM; goto err_out_regions; diff --git a/drivers/scsi/sata_via.c b/drivers/scsi/sata_via.c index 128b996b07b7..565872479b9a 100644 --- a/drivers/scsi/sata_via.c +++ b/drivers/scsi/sata_via.c @@ -212,7 +212,7 @@ static struct ata_probe_ent *vt6420_init_probe_ent(struct pci_dev *pdev) struct ata_probe_ent *probe_ent; struct ata_port_info *ppi = &svia_port_info; - probe_ent = ata_pci_init_native_mode(pdev, &ppi); + probe_ent = ata_pci_init_native_mode(pdev, &ppi, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); if (!probe_ent) return NULL; diff --git a/include/linux/libata.h b/include/linux/libata.h index 4739a75b983d..4d45179872cc 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -155,6 +155,10 @@ enum { ATA_SHIFT_UDMA = 0, ATA_SHIFT_MWDMA = 8, ATA_SHIFT_PIO = 11, + + /* Masks for port functions */ + ATA_PORT_PRIMARY = (1 << 0), + ATA_PORT_SECONDARY = (1 << 1), }; enum hsm_task_states { @@ -458,7 +462,7 @@ struct pci_bits { extern void ata_pci_host_stop (struct ata_host_set *host_set); extern struct ata_probe_ent * -ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port); +ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); extern int pci_test_config_bits(struct pci_dev *pdev, struct pci_bits *bits); #endif /* CONFIG_PCI */ From c187c4b58a9caff660a4c8ae39d0def88cc449af Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:46:51 -0400 Subject: [PATCH 041/101] libata: minor whitespace, comment, debug message updates --- drivers/scsi/libata-scsi.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 03b7a6dd95fe..d67c3fc98f7b 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -589,7 +589,8 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) head = track % dev->heads; sect = (u32)block % dev->sectors + 1; - DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", (u32)block, track, cyl, head, sect); + DPRINTK("block %u track %u cyl %u head %u sect %u\n", + (u32)block, track, cyl, head, sect); /* Check whether the converted CHS can fit. Cylinder: 0-65535 @@ -665,6 +666,10 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) block |= ((u64)scsicmd[3]); n_block |= ((u32)scsicmd[4]); + + /* for 6-byte r/w commands, transfer length 0 + * means 256 blocks of data, not 0 block. + */ if (!n_block) n_block = 256; @@ -692,7 +697,11 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* Check and compose ATA command */ if (!n_block) - /* In ATA, sector count 0 means 256 or 65536 sectors, not 0 sectors. */ + /* For 10-byte and 16-byte SCSI R/W commands, transfer + * length 0 means transfer 0 block of data. + * However, for ATA R/W commands, sector count 0 means + * 256 or 65536 sectors, not 0 sectors as in SCSI. + */ return 1; if (lba) { @@ -715,7 +724,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) tf->device |= (block >> 24) & 0xf; } - + qc->nsect = n_block; tf->nsect = n_block & 0xff; @@ -731,23 +740,23 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for CHS addressing. */ if ((block >> 28) || (n_block > 256)) return 1; - + /* Convert LBA to CHS */ track = (u32)block / dev->sectors; cyl = track / dev->heads; head = track % dev->heads; sect = (u32)block % dev->sectors + 1; - DPRINTK("block[%u] track[%u] cyl[%u] head[%u] sect[%u] \n", + DPRINTK("block %u track %u cyl %u head %u sect %u\n", (u32)block, track, cyl, head, sect); - + /* Check whether the converted CHS can fit. Cylinder: 0-65535 Head: 0-15 Sector: 1-255*/ - if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) + if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) return 1; - + qc->nsect = n_block; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ tf->lbal = sect; From 3aef52311bcb1f88aa5c786302f1ae14a787f61e Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:47:43 -0400 Subject: [PATCH 042/101] [libata scsi] tidy up SCSI lba and xfer len calculations move the redundant SCSI lba and transfer length calculation code from ata_scsi_verify_xlat() and ata_scsi_rw_xlat() to common functions. --- drivers/scsi/libata-scsi.c | 179 ++++++++++++++++++++++++------------- 1 file changed, 115 insertions(+), 64 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index d67c3fc98f7b..22434e0d4e75 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -487,6 +487,99 @@ static unsigned int ata_scsi_flush_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) return 0; } +/** + * scsi_6_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 6-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_6_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("six-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 8; + lba |= ((u64)scsicmd[3]); + + len |= ((u32)scsicmd[4]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_10_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 10-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_10_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("ten-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 24; + lba |= ((u64)scsicmd[3]) << 16; + lba |= ((u64)scsicmd[4]) << 8; + lba |= ((u64)scsicmd[5]); + + len |= ((u32)scsicmd[7]) << 8; + len |= ((u32)scsicmd[8]); + + *plba = lba; + *plen = len; +} + +/** + * scsi_16_lba_len - Get LBA and transfer length + * @scsicmd: SCSI command to translate + * + * Calculate LBA and transfer length for 16-byte commands. + * + * RETURNS: + * @plba: the LBA + * @plen: the transfer length + */ + +static void scsi_16_lba_len(u8 *scsicmd, u64 *plba, u32 *plen) +{ + u64 lba = 0; + u32 len = 0; + + VPRINTK("sixteen-byte command\n"); + + lba |= ((u64)scsicmd[2]) << 56; + lba |= ((u64)scsicmd[3]) << 48; + lba |= ((u64)scsicmd[4]) << 40; + lba |= ((u64)scsicmd[5]) << 32; + lba |= ((u64)scsicmd[6]) << 24; + lba |= ((u64)scsicmd[7]) << 16; + lba |= ((u64)scsicmd[8]) << 8; + lba |= ((u64)scsicmd[9]); + + len |= ((u32)scsicmd[10]) << 24; + len |= ((u32)scsicmd[11]) << 16; + len |= ((u32)scsicmd[12]) << 8; + len |= ((u32)scsicmd[13]); + + *plba = lba; + *plen = len; +} + /** * ata_scsi_verify_xlat - Translate SCSI VERIFY command into an ATA one * @qc: Storage for translated ATA taskfile @@ -508,38 +601,16 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; u64 dev_sectors = qc->dev->n_sectors; - u64 block = 0; - u32 n_block = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = ATA_PROT_NODATA; - if (scsicmd[0] == VERIFY) { - block |= ((u64)scsicmd[2]) << 24; - block |= ((u64)scsicmd[3]) << 16; - block |= ((u64)scsicmd[4]) << 8; - block |= ((u64)scsicmd[5]); - - n_block |= ((u32)scsicmd[7]) << 8; - n_block |= ((u32)scsicmd[8]); - } - - else if (scsicmd[0] == VERIFY_16) { - block |= ((u64)scsicmd[2]) << 56; - block |= ((u64)scsicmd[3]) << 48; - block |= ((u64)scsicmd[4]) << 40; - block |= ((u64)scsicmd[5]) << 32; - block |= ((u64)scsicmd[6]) << 24; - block |= ((u64)scsicmd[7]) << 16; - block |= ((u64)scsicmd[8]) << 8; - block |= ((u64)scsicmd[9]); - - n_block |= ((u32)scsicmd[10]) << 24; - n_block |= ((u32)scsicmd[11]) << 16; - n_block |= ((u32)scsicmd[12]) << 8; - n_block |= ((u32)scsicmd[13]); - } - + if (scsicmd[0] == VERIFY) + scsi_10_lba_len(scsicmd, &block, &n_block); + else if (scsicmd[0] == VERIFY_16) + scsi_16_lba_len(scsicmd, &block, &n_block); else return 1; @@ -636,8 +707,8 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) struct ata_device *dev = qc->dev; unsigned int lba = tf->flags & ATA_TFLAG_LBA; unsigned int lba48 = tf->flags & ATA_TFLAG_LBA48; - u64 block = 0; - u32 n_block = 0; + u64 block; + u32 n_block; tf->flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf->protocol = qc->dev->xfer_protocol; @@ -651,46 +722,26 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } /* Calculate the SCSI LBA and transfer length. */ - if (scsicmd[0] == READ_10 || scsicmd[0] == WRITE_10) { - block |= ((u64)scsicmd[2]) << 24; - block |= ((u64)scsicmd[3]) << 16; - block |= ((u64)scsicmd[4]) << 8; - block |= ((u64)scsicmd[5]); - - n_block |= ((u32)scsicmd[7]) << 8; - n_block |= ((u32)scsicmd[8]); - - VPRINTK("ten-byte command\n"); - } else if (scsicmd[0] == READ_6 || scsicmd[0] == WRITE_6) { - block |= ((u64)scsicmd[2]) << 8; - block |= ((u64)scsicmd[3]); - - n_block |= ((u32)scsicmd[4]); + switch (scsicmd[0]) { + case READ_10: + case WRITE_10: + scsi_10_lba_len(scsicmd, &block, &n_block); + break; + case READ_6: + case WRITE_6: + scsi_6_lba_len(scsicmd, &block, &n_block); /* for 6-byte r/w commands, transfer length 0 * means 256 blocks of data, not 0 block. */ if (!n_block) n_block = 256; - - VPRINTK("six-byte command\n"); - } else if (scsicmd[0] == READ_16 || scsicmd[0] == WRITE_16) { - block |= ((u64)scsicmd[2]) << 56; - block |= ((u64)scsicmd[3]) << 48; - block |= ((u64)scsicmd[4]) << 40; - block |= ((u64)scsicmd[5]) << 32; - block |= ((u64)scsicmd[6]) << 24; - block |= ((u64)scsicmd[7]) << 16; - block |= ((u64)scsicmd[8]) << 8; - block |= ((u64)scsicmd[9]); - - n_block |= ((u32)scsicmd[10]) << 24; - n_block |= ((u32)scsicmd[11]) << 16; - n_block |= ((u32)scsicmd[12]) << 8; - n_block |= ((u32)scsicmd[13]); - - VPRINTK("sixteen-byte command\n"); - } else { + break; + case READ_16: + case WRITE_16: + scsi_16_lba_len(scsicmd, &block, &n_block); + break; + default: DPRINTK("no-byte command\n"); return 1; } From 9d5b13021375cad2d64d56105e5f4b5f1509ced2 Mon Sep 17 00:00:00 2001 From: Albert Lee Date: Tue, 4 Oct 2005 08:48:17 -0400 Subject: [PATCH 043/101] [libata scsi] add CHS support to ata_scsi_start_stop_xlat() --- drivers/scsi/libata-scsi.c | 19 +++++++++++++++---- 1 file changed, 15 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 22434e0d4e75..4982e6eff700 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -435,10 +435,21 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, return 1; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ - tf->lbah = 0x0; - tf->lbam = 0x0; - tf->lbal = 0x0; - tf->device |= ATA_LBA; + + if (qc->dev->flags & ATA_DFLAG_LBA) { + qc->tf.flags |= ATA_TFLAG_LBA; + + tf->lbah = 0x0; + tf->lbam = 0x0; + tf->lbal = 0x0; + tf->device |= ATA_LBA; + } else { + /* CHS */ + tf->lbal = 0x1; /* sect */ + tf->lbam = 0x0; /* cyl low */ + tf->lbah = 0x0; /* cyl high */ + } + tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { tf->nsect = 0; /* time period value (0 implies now) */ From 87bf9c97b4b3af8dec7b2b79cdfe7bfc0a0a03b2 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Tue, 4 Oct 2005 13:00:39 -0700 Subject: [PATCH 044/101] [IPV6]: Fix infinite loop in udp_v6_get_port(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/udp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index e4cad11f284a..bf9519341fd3 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -99,7 +99,7 @@ static int udp_v6_get_port(struct sock *sk, unsigned short snum) next:; } result = best; - for(;; result += UDP_HTABLE_SIZE) { + for(i = 0; i < (1 << 16) / UDP_HTABLE_SIZE; i++, result += UDP_HTABLE_SIZE) { if (result > sysctl_local_port_range[1]) result = sysctl_local_port_range[0] + ((result - sysctl_local_port_range[0]) & @@ -107,6 +107,8 @@ static int udp_v6_get_port(struct sock *sk, unsigned short snum) if (!udp_lport_inuse(result)) break; } + if (i >= (1 << 16) / UDP_HTABLE_SIZE) + goto fail; gotit: udp_port_rover = snum = result; } else { From e6308be85afee685347fa3440bed10faaa5d6c1a Mon Sep 17 00:00:00 2001 From: Robert Olsson Date: Tue, 4 Oct 2005 13:01:58 -0700 Subject: [PATCH 045/101] [IPV4]: fib_trie root-node expansion The patch below introduces special thresholds to keep root node in the trie large. This gives a flatter tree at the cost of a modest memory increase. Overall it seems to be gain and this was also proposed by one the authors of the paper in recent a seminar. Main table after loading 123 k routes. Aver depth: 3.30 Max depth: 9 Root-node size 12 bits Total size: 4044 kB With the patch: Aver depth: 2.78 Max depth: 8 Root-node size 15 bits Total size: 4150 kB An increase of 8-10% was seen in forwading performance for an rDoS attack. Signed-off-by: Robert Olsson Signed-off-by: David S. Miller --- net/ipv4/fib_trie.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 50c0519cd70d..0093ea08c7f5 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -286,6 +286,8 @@ static inline void check_tnode(const struct tnode *tn) static int halve_threshold = 25; static int inflate_threshold = 50; +static int halve_threshold_root = 15; +static int inflate_threshold_root = 25; static void __alias_free_mem(struct rcu_head *head) @@ -449,6 +451,8 @@ static struct node *resize(struct trie *t, struct tnode *tn) int i; int err = 0; struct tnode *old_tn; + int inflate_threshold_use; + int halve_threshold_use; if (!tn) return NULL; @@ -541,10 +545,17 @@ static struct node *resize(struct trie *t, struct tnode *tn) check_tnode(tn); + /* Keep root node larger */ + + if(!tn->parent) + inflate_threshold_use = inflate_threshold_root; + else + inflate_threshold_use = inflate_threshold; + err = 0; while ((tn->full_children > 0 && 50 * (tn->full_children + tnode_child_length(tn) - tn->empty_children) >= - inflate_threshold * tnode_child_length(tn))) { + inflate_threshold_use * tnode_child_length(tn))) { old_tn = tn; tn = inflate(t, tn); @@ -564,10 +575,18 @@ static struct node *resize(struct trie *t, struct tnode *tn) * node is above threshold. */ + + /* Keep root node larger */ + + if(!tn->parent) + halve_threshold_use = halve_threshold_root; + else + halve_threshold_use = halve_threshold; + err = 0; while (tn->bits > 1 && 100 * (tnode_child_length(tn) - tn->empty_children) < - halve_threshold * tnode_child_length(tn)) { + halve_threshold_use * tnode_child_length(tn)) { old_tn = tn; tn = halve(t, tn); From 433992361ce95a1da76b76c9c24d4c957b058aff Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 4 Oct 2005 17:36:04 +0100 Subject: [PATCH 046/101] [PATCH] missing include in megaraid_sas megaraid_sas depends on arch-specific indirect includes pulling fs.h in; on alpha they do not. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/scsi/megaraid/megaraid_sas.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 1b3148e842af..c3f637395734 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -34,6 +34,7 @@ #include #include #include +#include #include #include From 25e2d79f527b7abce624f30516f3167195b69a2e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 4 Oct 2005 17:40:44 +0100 Subject: [PATCH 047/101] [PATCH] bogus kfree() in ibmtr On several failure exits in ibmtr we end up doing kfree() on dev->priv, with dev allocated by alloc_trdev() and ->priv never reassigned. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- drivers/net/tokenring/ibmtr.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index e7b001017b9a..32057e65808b 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -531,7 +531,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) if (!time_after(jiffies, timeout)) continue; DPRINTK( "Hardware timeout during initialization.\n"); iounmap(t_mmio); - kfree(ti); return -ENODEV; } ti->sram_phys = @@ -645,7 +644,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) DPRINTK("Unknown shared ram paging info %01X\n", ti->shared_ram_paging); iounmap(t_mmio); - kfree(ti); return -ENODEV; break; } /*end switch shared_ram_paging */ @@ -675,7 +673,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) "driver limit (%05x), adapter not started.\n", chk_base, ibmtr_mem_base + IBMTR_SHARED_RAM_SIZE); iounmap(t_mmio); - kfree(ti); return -ENODEV; } else { /* seems cool, record what we have figured out */ ti->sram_base = new_base >> 12; @@ -690,7 +687,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) DPRINTK("Could not grab irq %d. Halting Token Ring driver.\n", irq); iounmap(t_mmio); - kfree(ti); return -ENODEV; } /*?? Now, allocate some of the PIO PORTs for this driver.. */ @@ -699,7 +695,6 @@ static int __devinit ibmtr_probe1(struct net_device *dev, int PIOaddr) DPRINTK("Could not grab PIO range. Halting driver.\n"); free_irq(dev->irq, dev); iounmap(t_mmio); - kfree(ti); return -EBUSY; } From ce0fe7e70a0ad11097a3773e9f3f0de3d859edf0 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 4 Oct 2005 17:43:06 +0100 Subject: [PATCH 048/101] [PATCH] bfs endianness annotations Signed-off-by: Alexey Dobriyan Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/bfs/dir.c | 2 +- fs/bfs/inode.c | 2 +- include/linux/bfs_fs.h | 42 +++++++++++++++++++++--------------------- 3 files changed, 23 insertions(+), 23 deletions(-) diff --git a/fs/bfs/dir.c b/fs/bfs/dir.c index e240c335eb23..5af928fa0449 100644 --- a/fs/bfs/dir.c +++ b/fs/bfs/dir.c @@ -108,7 +108,7 @@ static int bfs_create(struct inode * dir, struct dentry * dentry, int mode, inode->i_mapping->a_ops = &bfs_aops; inode->i_mode = mode; inode->i_ino = ino; - BFS_I(inode)->i_dsk_ino = cpu_to_le16(ino); + BFS_I(inode)->i_dsk_ino = ino; BFS_I(inode)->i_sblock = 0; BFS_I(inode)->i_eblock = 0; insert_inode_hash(inode); diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c index c7b39aa279d7..868af0f224fb 100644 --- a/fs/bfs/inode.c +++ b/fs/bfs/inode.c @@ -357,7 +357,7 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) } info->si_blocks = (le32_to_cpu(bfs_sb->s_end) + 1)>>BFS_BSIZE_BITS; /* for statfs(2) */ - info->si_freeb = (le32_to_cpu(bfs_sb->s_end) + 1 - cpu_to_le32(bfs_sb->s_start))>>BFS_BSIZE_BITS; + info->si_freeb = (le32_to_cpu(bfs_sb->s_end) + 1 - le32_to_cpu(bfs_sb->s_start))>>BFS_BSIZE_BITS; info->si_freei = 0; info->si_lf_eblk = 0; info->si_lf_sblk = 0; diff --git a/include/linux/bfs_fs.h b/include/linux/bfs_fs.h index c1237aa92e38..8ed6dfdcd783 100644 --- a/include/linux/bfs_fs.h +++ b/include/linux/bfs_fs.h @@ -20,19 +20,19 @@ /* BFS inode layout on disk */ struct bfs_inode { - __u16 i_ino; + __le16 i_ino; __u16 i_unused; - __u32 i_sblock; - __u32 i_eblock; - __u32 i_eoffset; - __u32 i_vtype; - __u32 i_mode; - __s32 i_uid; - __s32 i_gid; - __u32 i_nlink; - __u32 i_atime; - __u32 i_mtime; - __u32 i_ctime; + __le32 i_sblock; + __le32 i_eblock; + __le32 i_eoffset; + __le32 i_vtype; + __le32 i_mode; + __le32 i_uid; + __le32 i_gid; + __le32 i_nlink; + __le32 i_atime; + __le32 i_mtime; + __le32 i_ctime; __u32 i_padding[4]; }; @@ -41,17 +41,17 @@ struct bfs_inode { #define BFS_DIRS_PER_BLOCK 32 struct bfs_dirent { - __u16 ino; + __le16 ino; char name[BFS_NAMELEN]; }; /* BFS superblock layout on disk */ struct bfs_super_block { - __u32 s_magic; - __u32 s_start; - __u32 s_end; - __s32 s_from; - __s32 s_to; + __le32 s_magic; + __le32 s_start; + __le32 s_end; + __le32 s_from; + __le32 s_to; __s32 s_bfrom; __s32 s_bto; char s_fsname[6]; @@ -66,15 +66,15 @@ struct bfs_super_block { #define BFS_INO2OFF(ino) \ ((__u32)(((ino) - BFS_ROOT_INO) * sizeof(struct bfs_inode)) + BFS_BSIZE) #define BFS_NZFILESIZE(ip) \ - ((cpu_to_le32((ip)->i_eoffset) + 1) - cpu_to_le32((ip)->i_sblock) * BFS_BSIZE) + ((le32_to_cpu((ip)->i_eoffset) + 1) - le32_to_cpu((ip)->i_sblock) * BFS_BSIZE) #define BFS_FILESIZE(ip) \ ((ip)->i_sblock == 0 ? 0 : BFS_NZFILESIZE(ip)) #define BFS_FILEBLOCKS(ip) \ - ((ip)->i_sblock == 0 ? 0 : (cpu_to_le32((ip)->i_eblock) + 1) - cpu_to_le32((ip)->i_sblock)) + ((ip)->i_sblock == 0 ? 0 : (le32_to_cpu((ip)->i_eblock) + 1) - le32_to_cpu((ip)->i_sblock)) #define BFS_UNCLEAN(bfs_sb, sb) \ - ((cpu_to_le32(bfs_sb->s_from) != -1) && (cpu_to_le32(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY)) + ((le32_to_cpu(bfs_sb->s_from) != -1) && (le32_to_cpu(bfs_sb->s_to) != -1) && !(sb->s_flags & MS_RDONLY)) #endif /* _LINUX_BFS_FS_H */ From c2b513dfbb04d7c94cca145172cfeb91f7683e54 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 4 Oct 2005 17:48:44 +0100 Subject: [PATCH 049/101] [PATCH] bfs iget() abuses bfs_fill_super() walks the inode table to get the bitmap of free inodes and collect stats. It has no business using iget() for that - it's a lot of extra work, extra icache pollution and more complex code. Switched to walking the damn thing directly. Note: that also allows to kill ->i_dsk_ino in there - separate patch if Tigran can confirm that this field can be zero only for deleted inodes (i.e. something that could only be found during that scan and not by normal lookups). Signed-off-by: Al Viro Signed-off-by: Linus Torvalds --- fs/bfs/inode.c | 44 +++++++++++++++++++++++++++++++------------- 1 file changed, 31 insertions(+), 13 deletions(-) diff --git a/fs/bfs/inode.c b/fs/bfs/inode.c index 868af0f224fb..3af6c73c5b5a 100644 --- a/fs/bfs/inode.c +++ b/fs/bfs/inode.c @@ -362,23 +362,41 @@ static int bfs_fill_super(struct super_block *s, void *data, int silent) info->si_lf_eblk = 0; info->si_lf_sblk = 0; info->si_lf_ioff = 0; + bh = NULL; for (i=BFS_ROOT_INO; i<=info->si_lasti; i++) { - inode = iget(s,i); - if (BFS_I(inode)->i_dsk_ino == 0) - info->si_freei++; - else { - set_bit(i, info->si_imap); - info->si_freeb -= inode->i_blocks; - if (BFS_I(inode)->i_eblock > info->si_lf_eblk) { - info->si_lf_eblk = BFS_I(inode)->i_eblock; - info->si_lf_sblk = BFS_I(inode)->i_sblock; - info->si_lf_ioff = BFS_INO2OFF(i); - } + struct bfs_inode *di; + int block = (i - BFS_ROOT_INO)/BFS_INODES_PER_BLOCK + 1; + int off = (i - BFS_ROOT_INO) % BFS_INODES_PER_BLOCK; + unsigned long sblock, eblock; + + if (!off) { + brelse(bh); + bh = sb_bread(s, block); + } + + if (!bh) + continue; + + di = (struct bfs_inode *)bh->b_data + off; + + if (!di->i_ino) { + info->si_freei++; + continue; + } + set_bit(i, info->si_imap); + info->si_freeb -= BFS_FILEBLOCKS(di); + + sblock = le32_to_cpu(di->i_sblock); + eblock = le32_to_cpu(di->i_eblock); + if (eblock > info->si_lf_eblk) { + info->si_lf_eblk = eblock; + info->si_lf_sblk = sblock; + info->si_lf_ioff = BFS_INO2OFF(i); } - iput(inode); } + brelse(bh); if (!(s->s_flags & MS_RDONLY)) { - mark_buffer_dirty(bh); + mark_buffer_dirty(info->si_sbh); s->s_dirt = 1; } dump_imap("read_super", s); From 71dc036247573e377703233af289019f4aa3176e Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Tue, 4 Oct 2005 14:53:49 -0400 Subject: [PATCH 050/101] [PATCH] UML - Fix Al's build tidying Al's build tidying missed one bit from me - without this UML doesn't boot. Signed-off-by: Jeff Dike Acked-by: Al Viro Signed-off-by: Linus Torvalds --- arch/um/sys-i386/user-offsets.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c index 677fc26a9bbe..26b68675053d 100644 --- a/arch/um/sys-i386/user-offsets.c +++ b/arch/um/sys-i386/user-offsets.c @@ -46,7 +46,7 @@ void foo(void) OFFSET(HOST_SC_FP_ST, _fpstate, _st); OFFSET(HOST_SC_FXSR_ENV, _fpstate, _fxsr_env); - DEFINE_LONGS(HOST_FRAME_SIZE, FRAME_SIZE); + DEFINE(HOST_FRAME_SIZE, FRAME_SIZE); DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_i387_struct)); DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fxsr_struct)); From fad1c45c939bb246a488be1fa06f539e85b80545 Mon Sep 17 00:00:00 2001 From: Allan Graves Date: Tue, 4 Oct 2005 14:53:52 -0400 Subject: [PATCH 051/101] [PATCH] uml: Fix sysrq-r support for skas mode The old code had the IP and SP coming from the registers in the thread struct, which are completely wrong since those are the userspace registers. This fixes that by pulling the correct values from the jmp_buf in which the kernel state of each thread is stored. Signed-off-by: Allan Graves Signed-off-by: Jeff Dike Signed-off-by: Linus Torvalds --- arch/um/include/registers.h | 12 +----------- arch/um/include/sysdep-x86_64/ptrace.h | 4 ---- arch/um/kernel/sysrq.c | 8 +------- arch/um/os-Linux/sys-i386/registers.c | 19 +++++++++---------- arch/um/os-Linux/sys-x86_64/registers.c | 19 +++++++++---------- arch/um/sys-i386/sysrq.c | 13 +------------ include/asm-um/processor-generic.h | 23 ++++++++++------------- include/asm-um/processor-i386.h | 15 ++++----------- include/asm-um/processor-x86_64.h | 14 +++----------- 9 files changed, 38 insertions(+), 89 deletions(-) diff --git a/arch/um/include/registers.h b/arch/um/include/registers.h index 0a35e6d0baa0..4892e5fcef07 100644 --- a/arch/um/include/registers.h +++ b/arch/um/include/registers.h @@ -15,16 +15,6 @@ extern void save_registers(int pid, union uml_pt_regs *regs); extern void restore_registers(int pid, union uml_pt_regs *regs); extern void init_registers(int pid); extern void get_safe_registers(unsigned long * regs); +extern void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer); #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/arch/um/include/sysdep-x86_64/ptrace.h b/arch/um/include/sysdep-x86_64/ptrace.h index 331aa2d1f3f5..8f0656766c21 100644 --- a/arch/um/include/sysdep-x86_64/ptrace.h +++ b/arch/um/include/sysdep-x86_64/ptrace.h @@ -218,10 +218,6 @@ struct syscall_args { case RBP: UPT_RBP(regs) = __upt_val; break; \ case ORIG_RAX: UPT_ORIG_RAX(regs) = __upt_val; break; \ case CS: UPT_CS(regs) = __upt_val; break; \ - case DS: UPT_DS(regs) = __upt_val; break; \ - case ES: UPT_ES(regs) = __upt_val; break; \ - case FS: UPT_FS(regs) = __upt_val; break; \ - case GS: UPT_GS(regs) = __upt_val; break; \ case EFLAGS: UPT_EFLAGS(regs) = __upt_val; break; \ default : \ panic("Bad register in UPT_SET : %d\n", reg); \ diff --git a/arch/um/kernel/sysrq.c b/arch/um/kernel/sysrq.c index f80850091e79..b331e970002f 100644 --- a/arch/um/kernel/sysrq.c +++ b/arch/um/kernel/sysrq.c @@ -62,13 +62,7 @@ void show_stack(struct task_struct *task, unsigned long *esp) if (esp == NULL) { if (task != current && task != NULL) { - /* XXX: Isn't this bogus? I.e. isn't this the - * *userspace* stack of this task? If not so, use this - * even when task == current (as in i386). - */ esp = (unsigned long *) KSTK_ESP(task); - /* Which one? No actual difference - just coding style.*/ - //esp = (unsigned long *) PT_REGS_IP(&task->thread.regs); } else { esp = (unsigned long *) &esp; } @@ -84,5 +78,5 @@ void show_stack(struct task_struct *task, unsigned long *esp) } printk("Call Trace: \n"); - show_trace(current, esp); + show_trace(task, esp); } diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index 3125d320722c..aee4812333c6 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -5,6 +5,7 @@ #include #include +#include #include "sysdep/ptrace_user.h" #include "sysdep/ptrace.h" #include "uml-config.h" @@ -126,13 +127,11 @@ void get_safe_registers(unsigned long *regs) memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long)); } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer) +{ + struct __jmp_buf_tag *jmpbuf = buffer; + + UPT_SET(uml_regs, EIP, jmpbuf->__jmpbuf[JB_PC]); + UPT_SET(uml_regs, UESP, jmpbuf->__jmpbuf[JB_SP]); + UPT_SET(uml_regs, EBP, jmpbuf->__jmpbuf[JB_BP]); +} diff --git a/arch/um/os-Linux/sys-x86_64/registers.c b/arch/um/os-Linux/sys-x86_64/registers.c index 44438d15c3d6..4b638dfb52b0 100644 --- a/arch/um/os-Linux/sys-x86_64/registers.c +++ b/arch/um/os-Linux/sys-x86_64/registers.c @@ -5,6 +5,7 @@ #include #include +#include #include "ptrace_user.h" #include "uml-config.h" #include "skas_ptregs.h" @@ -74,13 +75,11 @@ void get_safe_registers(unsigned long *regs) memcpy(regs, exec_regs, HOST_FRAME_SIZE * sizeof(unsigned long)); } -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ +void get_thread_regs(union uml_pt_regs *uml_regs, void *buffer) +{ + struct __jmp_buf_tag *jmpbuf = buffer; + + UPT_SET(uml_regs, RIP, jmpbuf->__jmpbuf[JB_PC]); + UPT_SET(uml_regs, RSP, jmpbuf->__jmpbuf[JB_RSP]); + UPT_SET(uml_regs, RBP, jmpbuf->__jmpbuf[JB_RBP]); +} diff --git a/arch/um/sys-i386/sysrq.c b/arch/um/sys-i386/sysrq.c index e3706d15c4f5..d5244f070539 100644 --- a/arch/um/sys-i386/sysrq.c +++ b/arch/um/sys-i386/sysrq.c @@ -88,9 +88,7 @@ void show_trace(struct task_struct* task, unsigned long * stack) task = current; if (task != current) { - //ebp = (unsigned long) KSTK_EBP(task); - /* Which one? No actual difference - just coding style.*/ - ebp = (unsigned long) PT_REGS_EBP(&task->thread.regs); + ebp = (unsigned long) KSTK_EBP(task); } else { asm ("movl %%ebp, %0" : "=r" (ebp) : ); } @@ -99,15 +97,6 @@ void show_trace(struct task_struct* task, unsigned long * stack) ((unsigned long)stack & (~(THREAD_SIZE - 1))); print_context_stack(context, stack, ebp); - /*while (((long) stack & (THREAD_SIZE-1)) != 0) { - addr = *stack; - if (__kernel_text_address(addr)) { - printk("%08lx: [<%08lx>]", (unsigned long) stack, addr); - print_symbol(" %s", addr); - printk("\n"); - } - stack++; - }*/ printk("\n"); } diff --git a/include/asm-um/processor-generic.h b/include/asm-um/processor-generic.h index 2d242360c3d6..075771c371f6 100644 --- a/include/asm-um/processor-generic.h +++ b/include/asm-um/processor-generic.h @@ -13,6 +13,7 @@ struct task_struct; #include "linux/config.h" #include "asm/ptrace.h" #include "choose-mode.h" +#include "registers.h" struct mm_struct; @@ -136,19 +137,15 @@ extern struct cpuinfo_um cpu_data[]; #define current_cpu_data boot_cpu_data #endif -#define KSTK_EIP(tsk) (PT_REGS_IP(&tsk->thread.regs)) -#define KSTK_ESP(tsk) (PT_REGS_SP(&tsk->thread.regs)) + +#ifdef CONFIG_MODE_SKAS +#define KSTK_REG(tsk, reg) \ + ({ union uml_pt_regs regs; \ + get_thread_regs(®s, tsk->thread.mode.skas.switch_buf); \ + UPT_REG(®s, reg); }) +#else +#define KSTK_REG(tsk, reg) (0xbadbabe) +#endif #define get_wchan(p) (0) #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/include/asm-um/processor-i386.h b/include/asm-um/processor-i386.h index 431bad3ae9d7..4108a579eb92 100644 --- a/include/asm-um/processor-i386.h +++ b/include/asm-um/processor-i386.h @@ -43,17 +43,10 @@ static inline void rep_nop(void) #define ARCH_IS_STACKGROW(address) \ (address + 32 >= UPT_SP(¤t->thread.regs.regs)) +#define KSTK_EIP(tsk) KSTK_REG(tsk, EIP) +#define KSTK_ESP(tsk) KSTK_REG(tsk, UESP) +#define KSTK_EBP(tsk) KSTK_REG(tsk, EBP) + #include "asm/processor-generic.h" #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ diff --git a/include/asm-um/processor-x86_64.h b/include/asm-um/processor-x86_64.h index 0beb9a42ae05..e1e1255a1d36 100644 --- a/include/asm-um/processor-x86_64.h +++ b/include/asm-um/processor-x86_64.h @@ -36,17 +36,9 @@ extern inline void rep_nop(void) #define ARCH_IS_STACKGROW(address) \ (address + 128 >= UPT_SP(¤t->thread.regs.regs)) +#define KSTK_EIP(tsk) KSTK_REG(tsk, RIP) +#define KSTK_ESP(tsk) KSTK_REG(tsk, RSP) + #include "asm/processor-generic.h" #endif - -/* - * Overrides for Emacs so that we follow Linus's tabbing style. - * Emacs will notice this stuff at the end of the file and automatically - * adjust the settings for this buffer only. This must remain at the end - * of the file. - * --------------------------------------------------------------------------- - * Local variables: - * c-file-style: "linux" - * End: - */ From d78795b6930956fb66238d4d26242482d4a31470 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 4 Oct 2005 23:17:51 +0100 Subject: [PATCH 052/101] [ARM] 2949/1: Hynix h720x Run mode Patch from Sascha Hauer After coming out of idle mode the h720x goes into slow mode. Switch it back to run mode. Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- include/asm-arm/arch-h720x/system.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/include/asm-arm/arch-h720x/system.h b/include/asm-arm/arch-h720x/system.h index 0b025e227ec2..09eda84592ff 100644 --- a/include/asm-arm/arch-h720x/system.h +++ b/include/asm-arm/arch-h720x/system.h @@ -17,9 +17,11 @@ static void arch_idle(void) { CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_IDLE; - __asm__ __volatile__( - "mov r0, r0\n\t" - "mov r0, r0"); + nop(); + nop(); + CPU_REG (PMU_BASE, PMU_MODE) = PMU_MODE_RUN; + nop(); + nop(); } From 0a5b0aa8a331f4346b4b02bc653107304a6abdc5 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 4 Oct 2005 23:17:52 +0100 Subject: [PATCH 053/101] [ARM] 2950/1: i.MX gpio setup function Patch from Sascha Hauer Current implementation of imx_gpio_mode does not allow to configure all alternate routing possibilities of the i.MX. With this patch every bit in the gpio setup registers has a corresponding bit in the gpio_mode parameter, so every routing should be possible now. Signed-off-by: Sascha Hauer Signed-off-by: Russell King --- arch/arm/mach-imx/generic.c | 23 ++++++++------- arch/arm/mach-imx/mx1ads.c | 2 +- include/asm-arm/arch-imx/imx-regs.h | 46 +++++++++++++++++++++-------- 3 files changed, 47 insertions(+), 24 deletions(-) diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c index 41e5849ae8da..f8a742bb2d5b 100644 --- a/arch/arm/mach-imx/generic.c +++ b/arch/arm/mach-imx/generic.c @@ -28,14 +28,15 @@ #include #include #include +#include #include void imx_gpio_mode(int gpio_mode) { unsigned int pin = gpio_mode & GPIO_PIN_MASK; - unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> 5; - unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> 10; + unsigned int port = (gpio_mode & GPIO_PORT_MASK) >> GPIO_PORT_SHIFT; + unsigned int ocr = (gpio_mode & GPIO_OCR_MASK) >> GPIO_OCR_SHIFT; unsigned int tmp; /* Pullup enable */ @@ -57,7 +58,7 @@ void imx_gpio_mode(int gpio_mode) GPR(port) &= ~(1<> GPIO_AOUT_SHIFT) & 3) << (pin * 2); + ICONFB1(port) &= ~( 3<<(pin*2)); + ICONFB1(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << (pin * 2); } else { tmp = OCR2(port); tmp &= ~( 3<<((pin-16)*2)); tmp |= (ocr << ((pin-16)*2)); OCR2(port) = tmp; - if( gpio_mode & GPIO_AOUT ) - ICONFA2(port) &= ~( 3<<((pin-16)*2)); - if( gpio_mode & GPIO_BOUT ) - ICONFB2(port) &= ~( 3<<((pin-16)*2)); + ICONFA2(port) &= ~( 3<<((pin-16)*2)); + ICONFA2(port) |= ((gpio_mode >> GPIO_AOUT_SHIFT) & 3) << ((pin-16) * 2); + ICONFB2(port) &= ~( 3<<((pin-16)*2)); + ICONFB2(port) |= ((gpio_mode >> GPIO_BOUT_SHIFT) & 3) << ((pin-16) * 2); } } diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c index 5d25434d332c..a7511ddfe364 100644 --- a/arch/arm/mach-imx/mx1ads.c +++ b/arch/arm/mach-imx/mx1ads.c @@ -55,7 +55,7 @@ static void __init mx1ads_init(void) { #ifdef CONFIG_LEDS - imx_gpio_mode(GPIO_PORTA | GPIO_OUT | GPIO_GPIO | 2); + imx_gpio_mode(GPIO_PORTA | GPIO_OUT | 2); #endif platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/include/asm-arm/arch-imx/imx-regs.h b/include/asm-arm/arch-imx/imx-regs.h index 93b840e8fa60..229f7008d74f 100644 --- a/include/asm-arm/arch-imx/imx-regs.h +++ b/include/asm-arm/arch-imx/imx-regs.h @@ -76,6 +76,7 @@ #define GPIO_PIN_MASK 0x1f #define GPIO_PORT_MASK (0x3 << 5) +#define GPIO_PORT_SHIFT 5 #define GPIO_PORTA (0<<5) #define GPIO_PORTB (1<<5) #define GPIO_PORTC (2<<5) @@ -88,24 +89,37 @@ #define GPIO_PF (0<<9) #define GPIO_AF (1<<9) +#define GPIO_OCR_SHIFT 10 #define GPIO_OCR_MASK (3<<10) #define GPIO_AIN (0<<10) #define GPIO_BIN (1<<10) #define GPIO_CIN (2<<10) -#define GPIO_GPIO (3<<10) +#define GPIO_DR (3<<10) -#define GPIO_AOUT (1<<12) -#define GPIO_BOUT (1<<13) +#define GPIO_AOUT_SHIFT 12 +#define GPIO_AOUT_MASK (3<<12) +#define GPIO_AOUT (0<<12) +#define GPIO_AOUT_ISR (1<<12) +#define GPIO_AOUT_0 (2<<12) +#define GPIO_AOUT_1 (3<<12) + +#define GPIO_BOUT_SHIFT 14 +#define GPIO_BOUT_MASK (3<<14) +#define GPIO_BOUT (0<<14) +#define GPIO_BOUT_ISR (1<<14) +#define GPIO_BOUT_0 (2<<14) +#define GPIO_BOUT_1 (3<<14) + +#define GPIO_GIUS (1<<16) /* assignements for GPIO alternate/primary functions */ /* FIXME: This list is not completed. The correct directions are * missing on some (many) pins */ -#define PA0_PF_A24 ( GPIO_PORTA | GPIO_PF | 0 ) -#define PA0_AIN_SPI2_CLK ( GPIO_PORTA | GPIO_OUT | GPIO_AIN | 0 ) +#define PA0_AIN_SPI2_CLK ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 0 ) #define PA0_AF_ETMTRACESYNC ( GPIO_PORTA | GPIO_AF | 0 ) -#define PA1_AOUT_SPI2_RXD ( GPIO_PORTA | GPIO_IN | GPIO_AOUT | 1 ) +#define PA1_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTA | GPIO_IN | 1 ) #define PA1_PF_TIN ( GPIO_PORTA | GPIO_PF | 1 ) #define PA2_PF_PWM0 ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 2 ) #define PA3_PF_CSI_MCLK ( GPIO_PORTA | GPIO_PF | 3 ) @@ -123,7 +137,7 @@ #define PA15_PF_I2C_SDA ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 15 ) #define PA16_PF_I2C_SCL ( GPIO_PORTA | GPIO_OUT | GPIO_PF | 16 ) #define PA17_AF_ETMTRACEPKT4 ( GPIO_PORTA | GPIO_AF | 17 ) -#define PA17_AIN_SPI2_SS ( GPIO_PORTA | GPIO_AIN | 17 ) +#define PA17_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTA | GPIO_OUT | 17 ) #define PA18_AF_ETMTRACEPKT5 ( GPIO_PORTA | GPIO_AF | 18 ) #define PA19_AF_ETMTRACEPKT6 ( GPIO_PORTA | GPIO_AF | 19 ) #define PA20_AF_ETMTRACEPKT7 ( GPIO_PORTA | GPIO_AF | 20 ) @@ -191,19 +205,27 @@ #define PC15_PF_SPI1_SS ( GPIO_PORTC | GPIO_PF | 15 ) #define PC16_PF_SPI1_MISO ( GPIO_PORTC | GPIO_PF | 16 ) #define PC17_PF_SPI1_MOSI ( GPIO_PORTC | GPIO_PF | 17 ) +#define PC24_BIN_UART3_RI ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 24 ) +#define PC25_BIN_UART3_DSR ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 25 ) +#define PC26_AOUT_UART3_DTR ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 26 ) +#define PC27_BIN_UART3_DCD ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 27 ) +#define PC28_BIN_UART3_CTS ( GPIO_GIUS | GPIO_PORTC | GPIO_OUT | GPIO_BIN | 28 ) +#define PC29_AOUT_UART3_RTS ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 29 ) +#define PC30_BIN_UART3_TX ( GPIO_GIUS | GPIO_PORTC | GPIO_BIN | 30 ) +#define PC31_AOUT_UART3_RX ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31) #define PD6_PF_LSCLK ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 ) #define PD7_PF_REV ( GPIO_PORTD | GPIO_PF | 7 ) #define PD7_AF_UART2_DTR ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 ) -#define PD7_AIN_SPI2_SCLK ( GPIO_PORTD | GPIO_AIN | 7 ) +#define PD7_AIN_SPI2_SCLK ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 ) #define PD8_PF_CLS ( GPIO_PORTD | GPIO_PF | 8 ) #define PD8_AF_UART2_DCD ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 ) -#define PD8_AIN_SPI2_SS ( GPIO_PORTD | GPIO_AIN | 8 ) +#define PD8_AIN_SPI2_SS ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 8 ) #define PD9_PF_PS ( GPIO_PORTD | GPIO_PF | 9 ) #define PD9_AF_UART2_RI ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 9 ) -#define PD9_AOUT_SPI2_RXD ( GPIO_PORTD | GPIO_IN | GPIO_AOUT | 9 ) +#define PD9_AOUT_SPI2_RXD ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | 9 ) #define PD10_PF_SPL_SPR ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 10 ) #define PD10_AF_UART2_DSR ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 10 ) -#define PD10_AIN_SPI2_TXD ( GPIO_PORTD | GPIO_OUT | GPIO_AIN | 10 ) +#define PD10_AIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_OUT | 10 ) #define PD11_PF_CONTRAST ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 11 ) #define PD12_PF_ACD_OE ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 12 ) #define PD13_PF_LP_HSYNC ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 13 ) @@ -225,7 +247,7 @@ #define PD29_PF_LD14 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 29 ) #define PD30_PF_LD15 ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 30 ) #define PD31_PF_TMR2OUT ( GPIO_PORTD | GPIO_PF | 31 ) -#define PD31_BIN_SPI2_TXD ( GPIO_PORTD | GPIO_BIN | 31 ) +#define PD31_BIN_SPI2_TXD ( GPIO_GIUS | GPIO_PORTD | GPIO_BIN | 31 ) /* * PWM controller From 74f8849496b73d2ae4f9c53f61bf59e063ceed88 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 4 Oct 2005 23:17:52 +0100 Subject: [PATCH 054/101] [ARM] 2951/1: fix wrong comment Patch from Nicolas Pitre The cmpxchg emulation syscall needs write access. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/traps.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index e7d22dbcb691..f6de76e0a45d 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -504,7 +504,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) bad_access: spin_unlock(&mm->page_table_lock); - /* simulate a read access fault */ + /* simulate a write access fault */ do_DataAbort(addr, 15 + (1 << 11), regs); return -1; } From c2f480869fa7559fa3532e415e3e3ec49339f208 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Tue, 4 Oct 2005 23:17:53 +0100 Subject: [PATCH 055/101] [ARM] 2952/1: fix a register clobber list Patch from Nicolas Pitre If gcc decides to assign lr to %0 we're screwed. Signed-off-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/sys_arm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 42629ff84f5a..ea569ba482b1 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -305,7 +305,7 @@ long execve(const char *filename, char **argv, char **envp) "Ir" (THREAD_START_SP - sizeof(regs)), "r" (®s), "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "ip", "memory"); + : "r0", "r1", "r2", "r3", "ip", "lr", "memory"); out: return ret; From 0835ae0f27c0bfde67613d189ef6c537e004a6de Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 4 Oct 2005 15:23:20 -0700 Subject: [PATCH 056/101] [SPARC64]: Replace cheetah+ code patching with variables. Instead of code patching to handle the page size fields in the context registers, just use variables from which we get the proper values. Signed-off-by: David S. Miller --- arch/sparc64/kernel/entry.S | 43 +++++---------------------- arch/sparc64/kernel/etrap.S | 51 +++----------------------------- arch/sparc64/kernel/head.S | 33 ++++----------------- arch/sparc64/kernel/rtrap.S | 23 ++------------ arch/sparc64/kernel/setup.c | 8 ++--- arch/sparc64/kernel/trampoline.S | 15 +++------- arch/sparc64/kernel/winfixup.S | 33 ++------------------- arch/sparc64/mm/init.c | 26 ++++++++++++---- 8 files changed, 47 insertions(+), 185 deletions(-) diff --git a/arch/sparc64/kernel/entry.S b/arch/sparc64/kernel/entry.S index 2879b1072921..f685035dbdb8 100644 --- a/arch/sparc64/kernel/entry.S +++ b/arch/sparc64/kernel/entry.S @@ -97,8 +97,8 @@ do_fpdis: faddd %f0, %f2, %f4 fmuld %f0, %f2, %f6 ldxa [%g3] ASI_DMMU, %g5 -cplus_fptrap_insn_1: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync add %g6, TI_FPREGS + 0xc0, %g2 @@ -126,8 +126,8 @@ cplus_fptrap_insn_1: fzero %f34 ldxa [%g3] ASI_DMMU, %g5 add %g6, TI_FPREGS, %g1 -cplus_fptrap_insn_2: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync add %g6, TI_FPREGS + 0x40, %g2 @@ -153,8 +153,8 @@ cplus_fptrap_insn_2: 3: mov SECONDARY_CONTEXT, %g3 add %g6, TI_FPREGS, %g1 ldxa [%g3] ASI_DMMU, %g5 -cplus_fptrap_insn_3: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync mov 0x40, %g2 @@ -319,8 +319,8 @@ do_fptrap_after_fsr: stx %g3, [%g6 + TI_GSR] mov SECONDARY_CONTEXT, %g3 ldxa [%g3] ASI_DMMU, %g5 -cplus_fptrap_insn_4: - sethi %hi(0), %g2 + sethi %hi(sparc64_kern_sec_context), %g2 + ldx [%g2 + %lo(sparc64_kern_sec_context)], %g2 stxa %g2, [%g3] ASI_DMMU membar #Sync add %g6, TI_FPREGS, %g2 @@ -341,33 +341,6 @@ cplus_fptrap_insn_4: ba,pt %xcc, etrap wr %g0, 0, %fprs -cplus_fptrap_1: - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - - .globl cheetah_plus_patch_fpdis -cheetah_plus_patch_fpdis: - /* We configure the dTLB512_0 for 4MB pages and the - * dTLB512_1 for 8K pages when in context zero. - */ - sethi %hi(cplus_fptrap_1), %o0 - lduw [%o0 + %lo(cplus_fptrap_1)], %o1 - - set cplus_fptrap_insn_1, %o2 - stw %o1, [%o2] - flush %o2 - set cplus_fptrap_insn_2, %o2 - stw %o1, [%o2] - flush %o2 - set cplus_fptrap_insn_3, %o2 - stw %o1, [%o2] - flush %o2 - set cplus_fptrap_insn_4, %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop - /* The registers for cross calls will be: * * DATA 0: [low 32-bits] Address of function to call, jmp to this diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S index 50d2af1d98ae..0d8eba21111b 100644 --- a/arch/sparc64/kernel/etrap.S +++ b/arch/sparc64/kernel/etrap.S @@ -68,12 +68,8 @@ etrap_irq: wrpr %g3, 0, %otherwin wrpr %g2, 0, %wstate -cplus_etrap_insn_1: - sethi %hi(0), %g3 - sllx %g3, 32, %g3 -cplus_etrap_insn_2: - sethi %hi(0), %g2 - or %g3, %g2, %g3 + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 stxa %g3, [%l4] ASI_DMMU flush %l6 wr %g0, ASI_AIUS, %asi @@ -215,12 +211,8 @@ scetrap: rdpr %pil, %g2 mov PRIMARY_CONTEXT, %l4 wrpr %g3, 0, %otherwin wrpr %g2, 0, %wstate -cplus_etrap_insn_3: - sethi %hi(0), %g3 - sllx %g3, 32, %g3 -cplus_etrap_insn_4: - sethi %hi(0), %g2 - or %g3, %g2, %g3 + sethi %hi(sparc64_kern_pri_context), %g2 + ldx [%g2 + %lo(sparc64_kern_pri_context)], %g3 stxa %g3, [%l4] ASI_DMMU flush %l6 @@ -264,38 +256,3 @@ cplus_etrap_insn_4: #undef TASK_REGOFF #undef ETRAP_PSTATE1 - -cplus_einsn_1: - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3 -cplus_einsn_2: - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - - .globl cheetah_plus_patch_etrap -cheetah_plus_patch_etrap: - /* We configure the dTLB512_0 for 4MB pages and the - * dTLB512_1 for 8K pages when in context zero. - */ - sethi %hi(cplus_einsn_1), %o0 - sethi %hi(cplus_etrap_insn_1), %o2 - lduw [%o0 + %lo(cplus_einsn_1)], %o1 - or %o2, %lo(cplus_etrap_insn_1), %o2 - stw %o1, [%o2] - flush %o2 - sethi %hi(cplus_etrap_insn_3), %o2 - or %o2, %lo(cplus_etrap_insn_3), %o2 - stw %o1, [%o2] - flush %o2 - - sethi %hi(cplus_einsn_2), %o0 - sethi %hi(cplus_etrap_insn_2), %o2 - lduw [%o0 + %lo(cplus_einsn_2)], %o1 - or %o2, %lo(cplus_etrap_insn_2), %o2 - stw %o1, [%o2] - flush %o2 - sethi %hi(cplus_etrap_insn_4), %o2 - or %o2, %lo(cplus_etrap_insn_4), %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop diff --git a/arch/sparc64/kernel/head.S b/arch/sparc64/kernel/head.S index 89406f9649a9..24340496cdd3 100644 --- a/arch/sparc64/kernel/head.S +++ b/arch/sparc64/kernel/head.S @@ -325,23 +325,7 @@ cheetah_tlb_fixup: 1: sethi %hi(tlb_type), %g1 stw %g2, [%g1 + %lo(tlb_type)] - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g1,g7,1f) - ba,pt %xcc, 2f - nop - -1: /* Patch context register writes to support nucleus page - * size correctly. - */ - call cheetah_plus_patch_etrap - nop - call cheetah_plus_patch_rtrap - nop - call cheetah_plus_patch_fpdis - nop - call cheetah_plus_patch_winfixup - nop - -2: /* Patch copy/page operations to cheetah optimized versions. */ + /* Patch copy/page operations to cheetah optimized versions. */ call cheetah_patch_copyops nop call cheetah_patch_copy_page @@ -484,20 +468,13 @@ spitfire_vpte_base: call prom_set_trap_table sethi %hi(sparc64_ttable_tl0), %o0 - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f) - ba,pt %xcc, 2f - nop - -1: /* Start using proper page size encodings in ctx register. */ - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3 + /* Start using proper page size encodings in ctx register. */ + sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 mov PRIMARY_CONTEXT, %g1 - sllx %g3, 32, %g3 - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - or %g3, %g2, %g3 - stxa %g3, [%g1] ASI_DMMU + stxa %g2, [%g1] ASI_DMMU membar #Sync -2: rdpr %pstate, %o1 or %o1, PSTATE_IE, %o1 wrpr %o1, 0, %pstate diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S index fafd227735fa..ecfb42a69a44 100644 --- a/arch/sparc64/kernel/rtrap.S +++ b/arch/sparc64/kernel/rtrap.S @@ -256,9 +256,8 @@ rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 brnz,pn %l3, kern_rtt mov PRIMARY_CONTEXT, %l7 ldxa [%l7 + %l7] ASI_DMMU, %l0 -cplus_rtrap_insn_1: - sethi %hi(0), %l1 - sllx %l1, 32, %l1 + sethi %hi(sparc64_kern_pri_nuc_bits), %l1 + ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1 or %l0, %l1, %l0 stxa %l0, [%l7] ASI_DMMU flush %g6 @@ -345,21 +344,3 @@ kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5 wr %g0, FPRS_DU, %fprs ba,pt %xcc, rt_continue stb %l5, [%g6 + TI_FPDEPTH] - -cplus_rinsn_1: - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1 - - .globl cheetah_plus_patch_rtrap -cheetah_plus_patch_rtrap: - /* We configure the dTLB512_0 for 4MB pages and the - * dTLB512_1 for 8K pages when in context zero. - */ - sethi %hi(cplus_rinsn_1), %o0 - sethi %hi(cplus_rtrap_insn_1), %o2 - lduw [%o0 + %lo(cplus_rinsn_1)], %o1 - or %o2, %lo(cplus_rtrap_insn_1), %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c index 4c9c8f241748..c1f34237cdf2 100644 --- a/arch/sparc64/kernel/setup.c +++ b/arch/sparc64/kernel/setup.c @@ -187,17 +187,13 @@ int prom_callback(long *args) } if ((va >= KERNBASE) && (va < (KERNBASE + (4 * 1024 * 1024)))) { - unsigned long kernel_pctx = 0; - - if (tlb_type == cheetah_plus) - kernel_pctx |= (CTX_CHEETAH_PLUS_NUC | - CTX_CHEETAH_PLUS_CTX0); + extern unsigned long sparc64_kern_pri_context; /* Spitfire Errata #32 workaround */ __asm__ __volatile__("stxa %0, [%1] %2\n\t" "flush %%g6" : /* No outputs */ - : "r" (kernel_pctx), + : "r" (sparc64_kern_pri_context), "r" (PRIMARY_CONTEXT), "i" (ASI_DMMU)); diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S index 89f2fcfcd662..9478551cb020 100644 --- a/arch/sparc64/kernel/trampoline.S +++ b/arch/sparc64/kernel/trampoline.S @@ -336,20 +336,13 @@ do_unlock: call init_irqwork_curcpu nop - BRANCH_IF_CHEETAH_PLUS_OR_FOLLOWON(g2,g3,1f) - ba,pt %xcc, 2f - nop - -1: /* Start using proper page size encodings in ctx register. */ - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %g3 + /* Start using proper page size encodings in ctx register. */ + sethi %hi(sparc64_kern_pri_context), %g3 + ldx [%g3 + %lo(sparc64_kern_pri_context)], %g2 mov PRIMARY_CONTEXT, %g1 - sllx %g3, 32, %g3 - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - or %g3, %g2, %g3 - stxa %g3, [%g1] ASI_DMMU + stxa %g2, [%g1] ASI_DMMU membar #Sync -2: rdpr %pstate, %o1 or %o1, PSTATE_IE, %o1 wrpr %o1, 0, %pstate diff --git a/arch/sparc64/kernel/winfixup.S b/arch/sparc64/kernel/winfixup.S index 99c809a1e5ac..39160926267b 100644 --- a/arch/sparc64/kernel/winfixup.S +++ b/arch/sparc64/kernel/winfixup.S @@ -16,23 +16,14 @@ .text set_pcontext: -cplus_winfixup_insn_1: - sethi %hi(0), %l1 + sethi %hi(sparc64_kern_pri_context), %l1 + ldx [%l1 + %lo(sparc64_kern_pri_context)], %l1 mov PRIMARY_CONTEXT, %g1 - sllx %l1, 32, %l1 -cplus_winfixup_insn_2: - sethi %hi(0), %g2 - or %l1, %g2, %l1 stxa %l1, [%g1] ASI_DMMU flush %g6 retl nop -cplus_wfinsn_1: - sethi %uhi(CTX_CHEETAH_PLUS_NUC), %l1 -cplus_wfinsn_2: - sethi %hi(CTX_CHEETAH_PLUS_CTX0), %g2 - .align 32 /* Here are the rules, pay attention. @@ -395,23 +386,3 @@ window_dax_from_user_common: add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap clr %l6 - - - .globl cheetah_plus_patch_winfixup -cheetah_plus_patch_winfixup: - sethi %hi(cplus_wfinsn_1), %o0 - sethi %hi(cplus_winfixup_insn_1), %o2 - lduw [%o0 + %lo(cplus_wfinsn_1)], %o1 - or %o2, %lo(cplus_winfixup_insn_1), %o2 - stw %o1, [%o2] - flush %o2 - - sethi %hi(cplus_wfinsn_2), %o0 - sethi %hi(cplus_winfixup_insn_2), %o2 - lduw [%o0 + %lo(cplus_wfinsn_2)], %o1 - or %o2, %lo(cplus_winfixup_insn_2), %o2 - stw %o1, [%o2] - flush %o2 - - retl - nop diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 5db50524f20d..4e2f71e0abc8 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -133,6 +133,12 @@ extern unsigned int sparc_ramdisk_size; struct page *mem_map_zero __read_mostly; +unsigned int sparc64_highest_unlocked_tlb_ent __read_mostly; + +unsigned long sparc64_kern_pri_context __read_mostly; +unsigned long sparc64_kern_pri_nuc_bits __read_mostly; +unsigned long sparc64_kern_sec_context __read_mostly; + int bigkernel = 0; /* XXX Tune this... */ @@ -582,13 +588,21 @@ static void __init remap_kernel(void) prom_dtlb_load(tlb_ent, tte_data, tte_vaddr); prom_itlb_load(tlb_ent, tte_data, tte_vaddr); if (bigkernel) { - prom_dtlb_load(tlb_ent - 1, + tlb_ent -= 1; + prom_dtlb_load(tlb_ent, tte_data + 0x400000, tte_vaddr + 0x400000); - prom_itlb_load(tlb_ent - 1, + prom_itlb_load(tlb_ent, tte_data + 0x400000, tte_vaddr + 0x400000); } + sparc64_highest_unlocked_tlb_ent = tlb_ent - 1; + if (tlb_type == cheetah_plus) { + sparc64_kern_pri_context = (CTX_CHEETAH_PLUS_CTX0 | + CTX_CHEETAH_PLUS_NUC); + sparc64_kern_pri_nuc_bits = CTX_CHEETAH_PLUS_NUC; + sparc64_kern_sec_context = CTX_CHEETAH_PLUS_CTX0; + } } static void __init inherit_prom_mappings(void) @@ -788,8 +802,8 @@ void inherit_locked_prom_mappings(int save_p) } } if (tlb_type == spitfire) { - int high = SPITFIRE_HIGHEST_LOCKED_TLBENT - bigkernel; - for (i = 0; i < high; i++) { + int high = sparc64_highest_unlocked_tlb_ent; + for (i = 0; i <= high; i++) { unsigned long data; /* Spitfire Errata #32 workaround */ @@ -877,9 +891,9 @@ void inherit_locked_prom_mappings(int save_p) } } } else if (tlb_type == cheetah || tlb_type == cheetah_plus) { - int high = CHEETAH_HIGHEST_LOCKED_TLBENT - bigkernel; + int high = sparc64_highest_unlocked_tlb_ent; - for (i = 0; i < high; i++) { + for (i = 0; i <= high; i++) { unsigned long data; data = cheetah_get_ldtlb_data(i); From 6d2553612fa329979e6423a5f2410fd7be5aa902 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Oct 2005 15:55:51 -0700 Subject: [PATCH 057/101] [INET]: Shrink struct inet_ehash_bucket on 32 bits UP No need to align struct inet_ehash_bucket on a 8 bytes boundary. On 32 bits Uniprocessor, that's a waste of 4 bytes per struct (50 %) On other platforms, the attribute is useless, natual alignement is already 8. platform | Size before | Size after patch -------------+-------------+------------------ 32 bits, UP | 8 | 4 32 bits, SMP | 8 | 8 64 bits, UP | 8 | 8 64 bits, SMP | 16 | 16 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/net/inet_hashtables.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/inet_hashtables.h b/include/net/inet_hashtables.h index 35f49e65e295..f50f95968340 100644 --- a/include/net/inet_hashtables.h +++ b/include/net/inet_hashtables.h @@ -40,7 +40,7 @@ struct inet_ehash_bucket { rwlock_t lock; struct hlist_head chain; -} __attribute__((__aligned__(8))); +}; /* There are a few simple rules, which allow for local port reuse by * an application. In essence: From 944d2647dded12e2b05ad8ebc020644bb1997ce1 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 5 Oct 2005 00:21:39 +0200 Subject: [PATCH 058/101] [PATCH] x86_64: Drop global bit from early low mappings Drop global bit from early low mappings Suggested by Linus, originally also proposed by Suresh. This fixes a race condition with early start of udev, originally tracked down by Suresh B. Siddha. The problem was that switching to the user space VM would not clear the global low mappings for the beginning of memory, which lead to memory corruption. Drop the global bits. The kernel mapping stays global because it should stay constant. Signed-off-by: Andi Kleen Signed-off-by: Linus Torvalds --- arch/x86_64/kernel/head.S | 40 +++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) diff --git a/arch/x86_64/kernel/head.S b/arch/x86_64/kernel/head.S index 4592bf21fcaf..b92e5f45ed46 100644 --- a/arch/x86_64/kernel/head.S +++ b/arch/x86_64/kernel/head.S @@ -270,26 +270,26 @@ ENTRY(level3_kernel_pgt) .org 0x4000 ENTRY(level2_ident_pgt) /* 40MB for bootup. */ - .quad 0x0000000000000183 - .quad 0x0000000000200183 - .quad 0x0000000000400183 - .quad 0x0000000000600183 - .quad 0x0000000000800183 - .quad 0x0000000000A00183 - .quad 0x0000000000C00183 - .quad 0x0000000000E00183 - .quad 0x0000000001000183 - .quad 0x0000000001200183 - .quad 0x0000000001400183 - .quad 0x0000000001600183 - .quad 0x0000000001800183 - .quad 0x0000000001A00183 - .quad 0x0000000001C00183 - .quad 0x0000000001E00183 - .quad 0x0000000002000183 - .quad 0x0000000002200183 - .quad 0x0000000002400183 - .quad 0x0000000002600183 + .quad 0x0000000000000083 + .quad 0x0000000000200083 + .quad 0x0000000000400083 + .quad 0x0000000000600083 + .quad 0x0000000000800083 + .quad 0x0000000000A00083 + .quad 0x0000000000C00083 + .quad 0x0000000000E00083 + .quad 0x0000000001000083 + .quad 0x0000000001200083 + .quad 0x0000000001400083 + .quad 0x0000000001600083 + .quad 0x0000000001800083 + .quad 0x0000000001A00083 + .quad 0x0000000001C00083 + .quad 0x0000000001E00083 + .quad 0x0000000002000083 + .quad 0x0000000002200083 + .quad 0x0000000002400083 + .quad 0x0000000002600083 /* Temporary mappings for the super early allocator in arch/x86_64/mm/init.c */ .globl temp_boot_pmds temp_boot_pmds: From a5181ab06ddca8071b4eb54ac2c314f7d24825d4 Mon Sep 17 00:00:00 2001 From: "Horst H. von Brand" Date: Tue, 4 Oct 2005 15:58:56 -0700 Subject: [PATCH 059/101] [NETFILTER]: Fix Kconfig typo Signed-off-by: Horst H. von Brand Signed-off-by: David S. Miller --- net/ipv4/netfilter/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig index 2cd7e7d1ac90..a7659728e7a0 100644 --- a/net/ipv4/netfilter/Kconfig +++ b/net/ipv4/netfilter/Kconfig @@ -141,7 +141,7 @@ config IP_NF_PPTP tristate 'PPTP protocol support' help This module adds support for PPTP (Point to Point Tunnelling - Protocol, RFC2637) conncection tracking and NAT. + Protocol, RFC2637) connection tracking and NAT. If you are running PPTP sessions over a stateful firewall or NAT box, you may want to enable this feature. From ce12467d44d7394731ec9e91e032d50b04e502f6 Mon Sep 17 00:00:00 2001 From: Deepak Saxena Date: Tue, 4 Oct 2005 16:32:38 -0700 Subject: [PATCH 060/101] [PATCH] Fix broken IXP4xx GPIO macro Macro ended up backwards during one of cleanups. Found by Alessandro Zummo. Signed-off-by: Deepak Saxena Signed-off-by: Linus Torvalds --- include/asm-arm/arch-ixp4xx/platform.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/asm-arm/arch-ixp4xx/platform.h b/include/asm-arm/arch-ixp4xx/platform.h index d13ee7f78c70..f14ed63590c3 100644 --- a/include/asm-arm/arch-ixp4xx/platform.h +++ b/include/asm-arm/arch-ixp4xx/platform.h @@ -93,7 +93,7 @@ extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); static inline void gpio_line_config(u8 line, u32 direction) { - if (direction == IXP4XX_GPIO_OUT) + if (direction == IXP4XX_GPIO_IN) *IXP4XX_GPIO_GPOER |= (1 << line); else *IXP4XX_GPIO_GPOER &= ~(1 << line); From 9bc39bec87ee3e35897fe27441e979e7c208f624 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Tue, 4 Oct 2005 21:33:10 -0400 Subject: [PATCH 061/101] [PATCH] orinoco: Information leakage due to incorrect padding The orinoco driver can send uninitialized data exposing random pieces of the system memory. This happens because data is not padded with zeroes when its length needs to be increased. Reported by Meder Kydyraliev Signed-off-by: Pavel Roskin Signed-off-by: Jeff Garzik --- drivers/net/wireless/orinoco.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index 6deb7cc810cc..cf3daaa1b369 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -503,9 +503,14 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) return 0; } - /* Length of the packet body */ - /* FIXME: what if the skb is smaller than this? */ - len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN); + /* Check packet length, pad short packets, round up odd length */ + len = max_t(int, ALIGN(skb->len, 2), ETH_ZLEN); + if (skb->len < len) { + skb = skb_padto(skb, len); + if (skb == NULL) + goto fail; + } + len -= ETH_HLEN; eh = (struct ethhdr *)skb->data; @@ -557,8 +562,7 @@ static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev) p = skb->data; } - /* Round up for odd length packets */ - err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2), + err = hermes_bap_pwrite(hw, USER_BAP, p, data_len, txfid, data_off); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", From 7b5b3f3d826ea87c224c66de9c95c09e7f110ecd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:38:44 -0700 Subject: [PATCH 062/101] [ATM]: fix sparse gfp nocast warnings Fix implicit nocast warnings in atm code: net/atm/atm_misc.c:35:44: warning: implicit cast to nocast type drivers/atm/fore200e.c:183:33: warning: implicit cast to nocast type Also use kzalloc() instead of kmalloc(). Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/atm/fore200e.c | 10 ++++------ include/linux/atmdev.h | 2 +- net/atm/atm_misc.c | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/drivers/atm/fore200e.c b/drivers/atm/fore200e.c index 2bf723a7b6e6..6f1a83c9d9e0 100644 --- a/drivers/atm/fore200e.c +++ b/drivers/atm/fore200e.c @@ -178,14 +178,12 @@ fore200e_irq_itoa(int irq) static void* -fore200e_kmalloc(int size, int flags) +fore200e_kmalloc(int size, unsigned int __nocast flags) { - void* chunk = kmalloc(size, flags); + void *chunk = kzalloc(size, flags); - if (chunk) - memset(chunk, 0x00, size); - else - printk(FORE200E "kmalloc() failed, requested size = %d, flags = 0x%x\n", size, flags); + if (!chunk) + printk(FORE200E "kmalloc() failed, requested size = %d, flags = 0x%x\n", size, flags); return chunk; } diff --git a/include/linux/atmdev.h b/include/linux/atmdev.h index 9f374cfa1b05..f1fd849e5535 100644 --- a/include/linux/atmdev.h +++ b/include/linux/atmdev.h @@ -457,7 +457,7 @@ static inline void atm_dev_put(struct atm_dev *dev) int atm_charge(struct atm_vcc *vcc,int truesize); struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, - int gfp_flags); + unsigned int __nocast gfp_flags); int atm_pcr_goal(struct atm_trafprm *tp); void vcc_release_async(struct atm_vcc *vcc, int reply); diff --git a/net/atm/atm_misc.c b/net/atm/atm_misc.c index b2113c3454ae..71abc99ec815 100644 --- a/net/atm/atm_misc.c +++ b/net/atm/atm_misc.c @@ -25,7 +25,7 @@ int atm_charge(struct atm_vcc *vcc,int truesize) struct sk_buff *atm_alloc_charge(struct atm_vcc *vcc,int pdu_size, - int gfp_flags) + unsigned int __nocast gfp_flags) { struct sock *sk = sk_atm(vcc); int guess = atm_guess_pdu2truesize(pdu_size); From de54f3907d2f5d8e25cfafe513811f146b250dee Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:39:41 -0700 Subject: [PATCH 063/101] [BONDING]: fix sparse gfp nocast warnings Fix implicit nocast warnings in bonding code: drivers/net/bonding/bond_main.c:1302:49: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index fd62e43a3510..f0a5b772a386 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1289,12 +1289,13 @@ static void bond_mc_list_destroy(struct bonding *bond) /* * Copy all the Multicast addresses from src to the bonding device dst */ -static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond, int gpf_flag) +static int bond_mc_list_copy(struct dev_mc_list *mc_list, struct bonding *bond, + unsigned int __nocast gfp_flag) { struct dev_mc_list *dmi, *new_dmi; for (dmi = mc_list; dmi; dmi = dmi->next) { - new_dmi = kmalloc(sizeof(struct dev_mc_list), gpf_flag); + new_dmi = kmalloc(sizeof(struct dev_mc_list), gfp_flag); if (!new_dmi) { /* FIXME: Potential memory leak !!! */ From 17b698856328a42d5874ac87640e2cd84a824eef Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:41:16 -0700 Subject: [PATCH 064/101] [CONNECTOR]: fix sparse gfp nocast warnings Fix implicit nocast warnings in connector code: drivers/connector/connector.c:102:24: warning: implicit cast to nocast type drivers/connector/connector.c:114:45: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- drivers/connector/connector.c | 3 ++- include/linux/connector.h | 2 +- 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index bb0b3a8de14b..1422285d537c 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -69,7 +69,8 @@ int cn_already_initialized = 0; * a new message. * */ -int cn_netlink_send(struct cn_msg *msg, u32 __group, int gfp_mask) +int cn_netlink_send(struct cn_msg *msg, u32 __group, + unsigned int __nocast gfp_mask) { struct cn_callback_entry *__cbq; unsigned int size; diff --git a/include/linux/connector.h b/include/linux/connector.h index 86d4b0a81713..96582c9911ac 100644 --- a/include/linux/connector.h +++ b/include/linux/connector.h @@ -149,7 +149,7 @@ struct cn_dev { int cn_add_callback(struct cb_id *, char *, void (*callback) (void *)); void cn_del_callback(struct cb_id *); -int cn_netlink_send(struct cn_msg *, u32, int); +int cn_netlink_send(struct cn_msg *, u32, unsigned int __nocast); int cn_queue_add_callback(struct cn_queue_dev *dev, char *name, struct cb_id *id, void (*callback)(void *)); void cn_queue_del_callback(struct cn_queue_dev *dev, struct cb_id *id); From f4a19a56e38442e434b8809915d756469f1e89a2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:41:48 -0700 Subject: [PATCH 065/101] [DECNET]: fix sparse gfp nocast warnings Fix implicit nocast warnings in decnet code: net/decnet/af_decnet.c:458:40: warning: implicit cast to nocast type net/decnet/dn_nsp_out.c:125:35: warning: implicit cast to nocast type net/decnet/dn_nsp_out.c:219:29: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/net/dn_nsp.h | 8 ++++---- include/net/dn_route.h | 2 +- net/decnet/af_decnet.c | 6 ++++-- net/decnet/dn_nsp_out.c | 23 ++++++++++++++--------- 4 files changed, 23 insertions(+), 16 deletions(-) diff --git a/include/net/dn_nsp.h b/include/net/dn_nsp.h index 6bbeafa73e8b..8a0891e2e888 100644 --- a/include/net/dn_nsp.h +++ b/include/net/dn_nsp.h @@ -19,9 +19,9 @@ extern void dn_nsp_send_data_ack(struct sock *sk); extern void dn_nsp_send_oth_ack(struct sock *sk); extern void dn_nsp_delayed_ack(struct sock *sk); extern void dn_send_conn_ack(struct sock *sk); -extern void dn_send_conn_conf(struct sock *sk, int gfp); +extern void dn_send_conn_conf(struct sock *sk, unsigned int __nocast gfp); extern void dn_nsp_send_disc(struct sock *sk, unsigned char type, - unsigned short reason, int gfp); + unsigned short reason, unsigned int __nocast gfp); extern void dn_nsp_return_disc(struct sk_buff *skb, unsigned char type, unsigned short reason); extern void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval); @@ -29,14 +29,14 @@ extern void dn_nsp_send_conninit(struct sock *sk, unsigned char flags); extern void dn_nsp_output(struct sock *sk); extern int dn_nsp_check_xmit_queue(struct sock *sk, struct sk_buff *skb, struct sk_buff_head *q, unsigned short acknum); -extern void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, int gfp, int oob); +extern void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, unsigned int __nocast gfp, int oob); extern unsigned long dn_nsp_persist(struct sock *sk); extern int dn_nsp_xmit_timeout(struct sock *sk); extern int dn_nsp_rx(struct sk_buff *); extern int dn_nsp_backlog_rcv(struct sock *sk, struct sk_buff *skb); -extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, int pri); +extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, unsigned int __nocast pri); extern struct sk_buff *dn_alloc_send_skb(struct sock *sk, size_t *size, int noblock, long timeo, int *err); #define NSP_REASON_OK 0 /* No error */ diff --git a/include/net/dn_route.h b/include/net/dn_route.h index d084721db198..11fe973cf383 100644 --- a/include/net/dn_route.h +++ b/include/net/dn_route.h @@ -15,7 +15,7 @@ GNU General Public License for more details. *******************************************************************************/ -extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, int pri); +extern struct sk_buff *dn_alloc_skb(struct sock *sk, int size, unsigned int __nocast pri); extern int dn_route_output_sock(struct dst_entry **pprt, struct flowi *, struct sock *sk, int flags); extern int dn_cache_dump(struct sk_buff *skb, struct netlink_callback *cb); extern int dn_cache_getroute(struct sk_buff *skb, struct nlmsghdr *nlh, void *arg); diff --git a/net/decnet/af_decnet.c b/net/decnet/af_decnet.c index 348f36b529f7..34d4128d56d5 100644 --- a/net/decnet/af_decnet.c +++ b/net/decnet/af_decnet.c @@ -452,7 +452,8 @@ static struct proto dn_proto = { .obj_size = sizeof(struct dn_sock), }; -static struct sock *dn_alloc_sock(struct socket *sock, int gfp) +static struct sock *dn_alloc_sock(struct socket *sock, + unsigned int __nocast gfp) { struct dn_scp *scp; struct sock *sk = sk_alloc(PF_DECnet, gfp, &dn_proto, 1); @@ -804,7 +805,8 @@ static int dn_auto_bind(struct socket *sock) return rv; } -static int dn_confirm_accept(struct sock *sk, long *timeo, int allocation) +static int dn_confirm_accept(struct sock *sk, long *timeo, + unsigned int __nocast allocation) { struct dn_scp *scp = DN_SK(sk); DEFINE_WAIT(wait); diff --git a/net/decnet/dn_nsp_out.c b/net/decnet/dn_nsp_out.c index 53633d352868..cd08244aa10c 100644 --- a/net/decnet/dn_nsp_out.c +++ b/net/decnet/dn_nsp_out.c @@ -117,7 +117,8 @@ try_again: * The eventual aim is for each socket to have a cached header size * for its outgoing packets, and to set hdr from this when sk != NULL. */ -struct sk_buff *dn_alloc_skb(struct sock *sk, int size, int pri) +struct sk_buff *dn_alloc_skb(struct sock *sk, int size, + unsigned int __nocast pri) { struct sk_buff *skb; int hdr = 64; @@ -210,7 +211,8 @@ static void dn_nsp_rtt(struct sock *sk, long rtt) * * Returns: The number of times the packet has been sent previously */ -static inline unsigned dn_nsp_clone_and_send(struct sk_buff *skb, int gfp) +static inline unsigned dn_nsp_clone_and_send(struct sk_buff *skb, + unsigned int __nocast gfp) { struct dn_skb_cb *cb = DN_SKB_CB(skb); struct sk_buff *skb2; @@ -350,7 +352,8 @@ static unsigned short *dn_nsp_mk_data_header(struct sock *sk, struct sk_buff *sk return ptr; } -void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, int gfp, int oth) +void dn_nsp_queue_xmit(struct sock *sk, struct sk_buff *skb, + unsigned int __nocast gfp, int oth) { struct dn_scp *scp = DN_SK(sk); struct dn_skb_cb *cb = DN_SKB_CB(skb); @@ -517,7 +520,7 @@ static int dn_nsp_retrans_conn_conf(struct sock *sk) return 0; } -void dn_send_conn_conf(struct sock *sk, int gfp) +void dn_send_conn_conf(struct sock *sk, unsigned int __nocast gfp) { struct dn_scp *scp = DN_SK(sk); struct sk_buff *skb = NULL; @@ -549,7 +552,8 @@ void dn_send_conn_conf(struct sock *sk, int gfp) static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg, - unsigned short reason, int gfp, struct dst_entry *dst, + unsigned short reason, unsigned int __nocast gfp, + struct dst_entry *dst, int ddl, unsigned char *dd, __u16 rem, __u16 loc) { struct sk_buff *skb = NULL; @@ -591,7 +595,7 @@ static __inline__ void dn_nsp_do_disc(struct sock *sk, unsigned char msgflg, void dn_nsp_send_disc(struct sock *sk, unsigned char msgflg, - unsigned short reason, int gfp) + unsigned short reason, unsigned int __nocast gfp) { struct dn_scp *scp = DN_SK(sk); int ddl = 0; @@ -612,7 +616,7 @@ void dn_nsp_return_disc(struct sk_buff *skb, unsigned char msgflg, { struct dn_skb_cb *cb = DN_SKB_CB(skb); int ddl = 0; - int gfp = GFP_ATOMIC; + unsigned int __nocast gfp = GFP_ATOMIC; dn_nsp_do_disc(NULL, msgflg, reason, gfp, skb->dst, ddl, NULL, cb->src_port, cb->dst_port); @@ -624,7 +628,7 @@ void dn_nsp_send_link(struct sock *sk, unsigned char lsflags, char fcval) struct dn_scp *scp = DN_SK(sk); struct sk_buff *skb; unsigned char *ptr; - int gfp = GFP_ATOMIC; + unsigned int __nocast gfp = GFP_ATOMIC; if ((skb = dn_alloc_skb(sk, DN_MAX_NSP_DATA_HEADER + 2, gfp)) == NULL) return; @@ -659,7 +663,8 @@ void dn_nsp_send_conninit(struct sock *sk, unsigned char msgflg) unsigned char menuver; struct dn_skb_cb *cb; unsigned char type = 1; - int allocation = (msgflg == NSP_CI) ? sk->sk_allocation : GFP_ATOMIC; + unsigned int __nocast allocation = + (msgflg == NSP_CI) ? sk->sk_allocation : GFP_ATOMIC; struct sk_buff *skb = dn_alloc_skb(sk, 200, allocation); if (!skb) From 8eea00a44d9f493869f8d30b72e3ed18475be556 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:42:15 -0700 Subject: [PATCH 066/101] [IPVS]: fix sparse gfp nocast warnings From: Randy Dunlap Fix implicit nocast warnings in ip_vs code: net/ipv4/ipvs/ip_vs_app.c:631:54: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/net/ip_vs.h | 2 +- net/ipv4/ipvs/ip_vs_app.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/ip_vs.h b/include/net/ip_vs.h index 06b4235aa016..ecb2b061f597 100644 --- a/include/net/ip_vs.h +++ b/include/net/ip_vs.h @@ -832,7 +832,7 @@ extern void ip_vs_app_inc_put(struct ip_vs_app *inc); extern int ip_vs_app_pkt_out(struct ip_vs_conn *, struct sk_buff **pskb); extern int ip_vs_app_pkt_in(struct ip_vs_conn *, struct sk_buff **pskb); -extern int ip_vs_skb_replace(struct sk_buff *skb, int pri, +extern int ip_vs_skb_replace(struct sk_buff *skb, unsigned int __nocast pri, char *o_buf, int o_len, char *n_buf, int n_len); extern int ip_vs_app_init(void); extern void ip_vs_app_cleanup(void); diff --git a/net/ipv4/ipvs/ip_vs_app.c b/net/ipv4/ipvs/ip_vs_app.c index 6e092dadb388..b942ff3c8860 100644 --- a/net/ipv4/ipvs/ip_vs_app.c +++ b/net/ipv4/ipvs/ip_vs_app.c @@ -604,7 +604,7 @@ static struct file_operations ip_vs_app_fops = { /* * Replace a segment of data with a new segment */ -int ip_vs_skb_replace(struct sk_buff *skb, int pri, +int ip_vs_skb_replace(struct sk_buff *skb, unsigned int __nocast pri, char *o_buf, int o_len, char *n_buf, int n_len) { struct iphdr *iph; From c6f4fafccfa66f0530587ac3c11bb8fd0b8fe8ab Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:42:42 -0700 Subject: [PATCH 067/101] [NETFILTER]: fix sparse gfp nocast warnings Fix implicit nocast warnings in nfnetlink code: net/netfilter/nfnetlink.c:204:43: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/netfilter/nfnetlink.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 49a3900e3d32..34d671974a4d 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -195,7 +195,8 @@ nfnetlink_check_attributes(struct nfnetlink_subsystem *subsys, int nfnetlink_send(struct sk_buff *skb, u32 pid, unsigned group, int echo) { - int allocation = in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; + unsigned int __nocast allocation = + in_interrupt() ? GFP_ATOMIC : GFP_KERNEL; int err = 0; NETLINK_CB(skb).dst_group = group; From 00fa02334540ec795934737cd6e6ef8db2560731 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:43:04 -0700 Subject: [PATCH 068/101] [AF_KEY]: fix sparse gfp nocast warnings Fix implicit nocast warnings in net/key code: net/key/af_key.c:195:27: warning: implicit cast to nocast type net/key/af_key.c:1439:28: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/key/af_key.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 4879743b945a..50d0a31c3ba6 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -185,7 +185,7 @@ static int pfkey_release(struct socket *sock) } static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2, - int allocation, struct sock *sk) + unsigned int __nocast allocation, struct sock *sk) { int err = -ENOBUFS; @@ -217,7 +217,7 @@ static int pfkey_broadcast_one(struct sk_buff *skb, struct sk_buff **skb2, #define BROADCAST_ONE 1 #define BROADCAST_REGISTERED 2 #define BROADCAST_PROMISC_ONLY 4 -static int pfkey_broadcast(struct sk_buff *skb, int allocation, +static int pfkey_broadcast(struct sk_buff *skb, unsigned int __nocast allocation, int broadcast_flags, struct sock *one_sk) { struct sock *sk; @@ -1416,7 +1416,8 @@ static int pfkey_get(struct sock *sk, struct sk_buff *skb, struct sadb_msg *hdr, return 0; } -static struct sk_buff *compose_sadb_supported(struct sadb_msg *orig, int allocation) +static struct sk_buff *compose_sadb_supported(struct sadb_msg *orig, + unsigned int __nocast allocation) { struct sk_buff *skb; struct sadb_msg *hdr; From dd13a285b79ba77416b96ee10f49097f4aaf48c5 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:44:45 -0700 Subject: [PATCH 069/101] [RPC]: fix sparse gfp nocast warnings Fix nocast sparse warnings: net/rxrpc/call.c:2013:25: warning: implicit cast to nocast type net/rxrpc/connection.c:538:46: warning: implicit cast to nocast type net/sunrpc/sched.c:730:36: warning: implicit cast to nocast type net/sunrpc/sched.c:734:56: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/rxrpc/call.h | 2 +- include/rxrpc/message.h | 2 +- net/rxrpc/call.c | 2 +- net/rxrpc/connection.c | 2 +- net/sunrpc/sched.c | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) diff --git a/include/rxrpc/call.h b/include/rxrpc/call.h index f48f27e9e0ab..8118731e7d96 100644 --- a/include/rxrpc/call.h +++ b/include/rxrpc/call.h @@ -203,7 +203,7 @@ extern int rxrpc_call_write_data(struct rxrpc_call *call, size_t sioc, struct kvec *siov, uint8_t rxhdr_flags, - int alloc_flags, + unsigned int __nocast alloc_flags, int dup_data, size_t *size_sent); diff --git a/include/rxrpc/message.h b/include/rxrpc/message.h index 3a59df6870b2..983d9f9eee1a 100644 --- a/include/rxrpc/message.h +++ b/include/rxrpc/message.h @@ -63,7 +63,7 @@ extern int rxrpc_conn_newmsg(struct rxrpc_connection *conn, uint8_t type, int count, struct kvec *diov, - int alloc_flags, + unsigned int __nocast alloc_flags, struct rxrpc_message **_msg); extern int rxrpc_conn_sendmsg(struct rxrpc_connection *conn, struct rxrpc_message *msg); diff --git a/net/rxrpc/call.c b/net/rxrpc/call.c index 5cfd4cadee42..86f777052633 100644 --- a/net/rxrpc/call.c +++ b/net/rxrpc/call.c @@ -1923,7 +1923,7 @@ int rxrpc_call_write_data(struct rxrpc_call *call, size_t sioc, struct kvec *siov, u8 rxhdr_flags, - int alloc_flags, + unsigned int __nocast alloc_flags, int dup_data, size_t *size_sent) { diff --git a/net/rxrpc/connection.c b/net/rxrpc/connection.c index 61463c74f8cc..be4b2be58956 100644 --- a/net/rxrpc/connection.c +++ b/net/rxrpc/connection.c @@ -522,7 +522,7 @@ int rxrpc_conn_newmsg(struct rxrpc_connection *conn, uint8_t type, int dcount, struct kvec diov[], - int alloc_flags, + unsigned int __nocast alloc_flags, struct rxrpc_message **_msg) { struct rxrpc_message *msg; diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index f3104035e35d..ade730eaf401 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -719,7 +719,7 @@ static void rpc_async_schedule(void *arg) void * rpc_malloc(struct rpc_task *task, size_t size) { - int gfp; + unsigned int __nocast gfp; if (task->tk_flags & RPC_TASK_SWAPPER) gfp = GFP_ATOMIC; From 3d2aef668920e8d93b77f145f8f647f62abe75db Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:45:14 -0700 Subject: [PATCH 070/101] [TEXTSEARCH]: fix sparse gfp nocast warnings Fix nocast sparse warnings: include/linux/textsearch.h:165:57: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/linux/textsearch.h | 3 ++- lib/ts_bm.c | 2 +- lib/ts_fsm.c | 2 +- lib/ts_kmp.c | 2 +- 4 files changed, 5 insertions(+), 4 deletions(-) diff --git a/include/linux/textsearch.h b/include/linux/textsearch.h index 941f45ac117a..1a4990e448e9 100644 --- a/include/linux/textsearch.h +++ b/include/linux/textsearch.h @@ -158,7 +158,8 @@ extern unsigned int textsearch_find_continuous(struct ts_config *, #define TS_PRIV_ALIGNTO 8 #define TS_PRIV_ALIGN(len) (((len) + TS_PRIV_ALIGNTO-1) & ~(TS_PRIV_ALIGNTO-1)) -static inline struct ts_config *alloc_ts_config(size_t payload, int gfp_mask) +static inline struct ts_config *alloc_ts_config(size_t payload, + unsigned int __nocast gfp_mask) { struct ts_config *conf; diff --git a/lib/ts_bm.c b/lib/ts_bm.c index 2cc79112ecc3..1b61fceef777 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -127,7 +127,7 @@ static void compute_prefix_tbl(struct ts_bm *bm, const u8 *pattern, } static struct ts_config *bm_init(const void *pattern, unsigned int len, - int gfp_mask) + unsigned int __nocast gfp_mask) { struct ts_config *conf; struct ts_bm *bm; diff --git a/lib/ts_fsm.c b/lib/ts_fsm.c index d27c0a072940..ef9779e00506 100644 --- a/lib/ts_fsm.c +++ b/lib/ts_fsm.c @@ -258,7 +258,7 @@ found_match: } static struct ts_config *fsm_init(const void *pattern, unsigned int len, - int gfp_mask) + unsigned int __nocast gfp_mask) { int i, err = -EINVAL; struct ts_config *conf; diff --git a/lib/ts_kmp.c b/lib/ts_kmp.c index 73266b975585..e45f0f0c2379 100644 --- a/lib/ts_kmp.c +++ b/lib/ts_kmp.c @@ -87,7 +87,7 @@ static inline void compute_prefix_tbl(const u8 *pattern, unsigned int len, } static struct ts_config *kmp_init(const void *pattern, unsigned int len, - int gfp_mask) + unsigned int __nocast gfp_mask) { struct ts_config *conf; struct ts_kmp *kmp; From 83fa3400ebcba307a60909824a251be984eb9567 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 4 Oct 2005 22:45:35 -0700 Subject: [PATCH 071/101] [XFRM]: fix sparse gfp nocast warnings Fix implicit nocast warnings in xfrm code: net/xfrm/xfrm_policy.c:232:47: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- include/net/xfrm.h | 2 +- net/xfrm/xfrm_policy.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index a9d0d8c5dfbf..7564b2ce449f 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -875,7 +875,7 @@ static inline int xfrm_dst_lookup(struct xfrm_dst **dst, struct flowi *fl, unsig } #endif -struct xfrm_policy *xfrm_policy_alloc(int gfp); +struct xfrm_policy *xfrm_policy_alloc(unsigned int __nocast gfp); extern int xfrm_policy_walk(int (*func)(struct xfrm_policy *, int, int, void*), void *); int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl); struct xfrm_policy *xfrm_policy_bysel(int dir, struct xfrm_selector *sel, diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index fda737d77edc..c6a0d34fc295 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -225,7 +225,7 @@ expired: * SPD calls. */ -struct xfrm_policy *xfrm_policy_alloc(int gfp) +struct xfrm_policy *xfrm_policy_alloc(unsigned int __nocast gfp) { struct xfrm_policy *policy; From 67846b30171cc4d706125f630193a76a26bb334a Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 02:58:32 -0400 Subject: [PATCH 072/101] libata: add ata_ratelimit(), use it in AHCI driver irq handler --- drivers/scsi/ahci.c | 31 +++++++++++++++++++++++++------ drivers/scsi/libata-core.c | 23 +++++++++++++++++++++++ include/linux/libata.h | 2 ++ 3 files changed, 50 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c index c2c8fa828e24..5ec866b00479 100644 --- a/drivers/scsi/ahci.c +++ b/drivers/scsi/ahci.c @@ -672,17 +672,36 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs * for (i = 0; i < host_set->n_ports; i++) { struct ata_port *ap; - u32 tmp; - VPRINTK("port %u\n", i); + if (!(irq_stat & (1 << i))) + continue; + ap = host_set->ports[i]; - tmp = irq_stat & (1 << i); - if (tmp && ap) { + if (ap) { struct ata_queued_cmd *qc; qc = ata_qc_from_tag(ap, ap->active_tag); - if (ahci_host_intr(ap, qc)) - irq_ack |= (1 << i); + if (!ahci_host_intr(ap, qc)) + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): unhandled interrupt on port %u\n", + pci_name(pdev), i); + } + + VPRINTK("port %u\n", i); + } else { + VPRINTK("port %u (no irq)\n", i); + if (ata_ratelimit()) { + struct pci_dev *pdev = + to_pci_dev(ap->host_set->dev); + printk(KERN_WARNING + "ahci(%s): interrupt on disabled port %u\n", + pci_name(pdev), i); + } } + + irq_ack |= (1 << i); } if (irq_ack) { diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f0894bfa908b..ceffaef37d17 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -48,6 +48,7 @@ #include #include #include +#include #include #include "scsi.h" #include "scsi_priv.h" @@ -4688,6 +4689,27 @@ static void __exit ata_exit(void) module_init(ata_init); module_exit(ata_exit); +static unsigned long ratelimit_time; +static spinlock_t ata_ratelimit_lock = SPIN_LOCK_UNLOCKED; + +int ata_ratelimit(void) +{ + int rc; + unsigned long flags; + + spin_lock_irqsave(&ata_ratelimit_lock, flags); + + if (time_after(jiffies, ratelimit_time)) { + rc = 1; + ratelimit_time = jiffies + (HZ/5); + } else + rc = 0; + + spin_unlock_irqrestore(&ata_ratelimit_lock, flags); + + return rc; +} + /* * libata is essentially a library of internal helper functions for * low-level ATA host controller drivers. As such, the API/ABI is @@ -4729,6 +4751,7 @@ EXPORT_SYMBOL_GPL(sata_phy_reset); EXPORT_SYMBOL_GPL(__sata_phy_reset); EXPORT_SYMBOL_GPL(ata_bus_reset); EXPORT_SYMBOL_GPL(ata_port_disable); +EXPORT_SYMBOL_GPL(ata_ratelimit); EXPORT_SYMBOL_GPL(ata_scsi_ioctl); EXPORT_SYMBOL_GPL(ata_scsi_queuecmd); EXPORT_SYMBOL_GPL(ata_scsi_error); diff --git a/include/linux/libata.h b/include/linux/libata.h index 4d45179872cc..7929cfc9318d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -410,6 +410,8 @@ extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmn extern int ata_scsi_error(struct Scsi_Host *host); extern int ata_scsi_release(struct Scsi_Host *host); extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc); +extern int ata_ratelimit(void); + /* * Default driver ops implementations */ From 329d4dd72e5c3393a0c7aeebf3e62df77b196d71 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 5 Oct 2005 08:36:02 +0100 Subject: [PATCH 073/101] [PATCH] fix the breakage in sparc headers If we switch extern inline to static inline, we'd better switch the pre-declarations we use to say that these puppies have __attribute_const__ on them. Otherwise we get extern declaration followed by static inline one. Which makes gcc unhappy, and for a good reason... Signed-off-by: Al Viro Signed-off-by: David S. Miller Signed-off-by: Linus Torvalds --- include/asm-sparc/btfixup.h | 12 ++++++------ include/asm-sparc/pgtable.h | 16 ++++++++-------- 2 files changed, 14 insertions(+), 14 deletions(-) diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h index 6b29503256fd..c2868d0f60b6 100644 --- a/include/asm-sparc/btfixup.h +++ b/include/asm-sparc/btfixup.h @@ -49,7 +49,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); /* Put bottom 13bits into some register variable */ #define BTFIXUPDEF_SIMM13(__name) \ - extern unsigned int ___sf_##__name(void) __attribute_const__; \ + static inline unsigned int ___sf_##__name(void) __attribute_const__; \ extern unsigned ___ss_##__name[2]; \ static inline unsigned int ___sf_##__name(void) { \ unsigned int ret; \ @@ -57,7 +57,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); return ret; \ } #define BTFIXUPDEF_SIMM13_INIT(__name,__val) \ - extern unsigned int ___sf_##__name(void) __attribute_const__; \ + static inline unsigned int ___sf_##__name(void) __attribute_const__; \ extern unsigned ___ss_##__name[2]; \ static inline unsigned int ___sf_##__name(void) { \ unsigned int ret; \ @@ -71,7 +71,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); */ #define BTFIXUPDEF_HALF(__name) \ - extern unsigned int ___af_##__name(void) __attribute_const__; \ + static inline unsigned int ___af_##__name(void) __attribute_const__; \ extern unsigned ___as_##__name[2]; \ static inline unsigned int ___af_##__name(void) { \ unsigned int ret; \ @@ -79,7 +79,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); return ret; \ } #define BTFIXUPDEF_HALF_INIT(__name,__val) \ - extern unsigned int ___af_##__name(void) __attribute_const__; \ + static inline unsigned int ___af_##__name(void) __attribute_const__; \ extern unsigned ___as_##__name[2]; \ static inline unsigned int ___af_##__name(void) { \ unsigned int ret; \ @@ -90,7 +90,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); /* Put upper 22 bits into some register variable */ #define BTFIXUPDEF_SETHI(__name) \ - extern unsigned int ___hf_##__name(void) __attribute_const__; \ + static inline unsigned int ___hf_##__name(void) __attribute_const__; \ extern unsigned ___hs_##__name[2]; \ static inline unsigned int ___hf_##__name(void) { \ unsigned int ret; \ @@ -98,7 +98,7 @@ extern unsigned int ___illegal_use_of_BTFIXUP_INT_in_module(void); return ret; \ } #define BTFIXUPDEF_SETHI_INIT(__name,__val) \ - extern unsigned int ___hf_##__name(void) __attribute_const__; \ + static inline unsigned int ___hf_##__name(void) __attribute_const__; \ extern unsigned ___hs_##__name[2]; \ static inline unsigned int ___hf_##__name(void) { \ unsigned int ret; \ diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h index ae883f295f1f..a14e98677500 100644 --- a/include/asm-sparc/pgtable.h +++ b/include/asm-sparc/pgtable.h @@ -194,19 +194,19 @@ BTFIXUPDEF_HALF(pte_writei) BTFIXUPDEF_HALF(pte_dirtyi) BTFIXUPDEF_HALF(pte_youngi) -extern int pte_write(pte_t pte) __attribute_const__; +static int pte_write(pte_t pte) __attribute_const__; static inline int pte_write(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_writei); } -extern int pte_dirty(pte_t pte) __attribute_const__; +static int pte_dirty(pte_t pte) __attribute_const__; static inline int pte_dirty(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_dirtyi); } -extern int pte_young(pte_t pte) __attribute_const__; +static int pte_young(pte_t pte) __attribute_const__; static inline int pte_young(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_youngi); @@ -217,7 +217,7 @@ static inline int pte_young(pte_t pte) */ BTFIXUPDEF_HALF(pte_filei) -extern int pte_file(pte_t pte) __attribute_const__; +static int pte_file(pte_t pte) __attribute_const__; static inline int pte_file(pte_t pte) { return pte_val(pte) & BTFIXUP_HALF(pte_filei); @@ -229,19 +229,19 @@ BTFIXUPDEF_HALF(pte_wrprotecti) BTFIXUPDEF_HALF(pte_mkcleani) BTFIXUPDEF_HALF(pte_mkoldi) -extern pte_t pte_wrprotect(pte_t pte) __attribute_const__; +static pte_t pte_wrprotect(pte_t pte) __attribute_const__; static inline pte_t pte_wrprotect(pte_t pte) { return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_wrprotecti)); } -extern pte_t pte_mkclean(pte_t pte) __attribute_const__; +static pte_t pte_mkclean(pte_t pte) __attribute_const__; static inline pte_t pte_mkclean(pte_t pte) { return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkcleani)); } -extern pte_t pte_mkold(pte_t pte) __attribute_const__; +static pte_t pte_mkold(pte_t pte) __attribute_const__; static inline pte_t pte_mkold(pte_t pte) { return __pte(pte_val(pte) & ~BTFIXUP_HALF(pte_mkoldi)); @@ -278,7 +278,7 @@ BTFIXUPDEF_CALL_CONST(pte_t, mk_pte_io, unsigned long, pgprot_t, int) BTFIXUPDEF_INT(pte_modify_mask) -extern pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__; +static pte_t pte_modify(pte_t pte, pgprot_t newprot) __attribute_const__; static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) { return __pte((pte_val(pte) & BTFIXUP_INT(pte_modify_mask)) | From 23cb8c297eb939b25e5a628dc9e8a71b17f1c44e Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 5 Oct 2005 17:43:40 +1000 Subject: [PATCH 074/101] [PATCH] ppc: Fix timekeeping with HZ=250 on some Mac models Older Macs which uses the VIA chip timers to calibrate the timebase used some code that wouldn't work if HZ wasn't divisible by 100... This fixes it at least for 250. Not totally perfect but should be enough for now (so it at least works with the default value which is now 250). There is still a potential issue with the core using CLOCK_TICK_RATE to maintain xtime and CLOCK_TICK_RATE value on ppc32 is pure crap, but that is a different problem, this patch at least brings us back to our previous situation. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Linus Torvalds --- arch/ppc/platforms/pmac_time.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ppc/platforms/pmac_time.c b/arch/ppc/platforms/pmac_time.c index 778ce4fec368..efb819f9490d 100644 --- a/arch/ppc/platforms/pmac_time.c +++ b/arch/ppc/platforms/pmac_time.c @@ -195,7 +195,7 @@ via_calibrate_decr(void) ; dend = get_dec(); - tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100)); + tb_ticks_per_jiffy = (dstart - dend) / ((6 * HZ)/100); tb_to_us = mulhwu_scale_factor(dstart - dend, 60000); printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n", From c0758146adbe39514e75ac860ce7e49f865c2297 Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Mon, 3 Oct 2005 15:02:20 -0400 Subject: [PATCH 075/101] [PATCH] Fix drm 'debug' sysfs permissions Just enables some extra printk's, but still.. Only the sysadmin should be able to do that. Signed-off-by: Linus Torvalds --- drivers/char/drm/drm_stub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/char/drm/drm_stub.c b/drivers/char/drm/drm_stub.c index 95a976c96eb8..70458cb061c6 100644 --- a/drivers/char/drm/drm_stub.c +++ b/drivers/char/drm/drm_stub.c @@ -47,7 +47,7 @@ MODULE_PARM_DESC(cards_limit, "Maximum number of graphics cards"); MODULE_PARM_DESC(debug, "Enable debug output"); module_param_named(cards_limit, drm_cards_limit, int, 0444); -module_param_named(debug, drm_debug, int, 0666); +module_param_named(debug, drm_debug, int, 0600); drm_head_t **drm_heads; struct drm_sysfs_class *drm_class; From a15dbeb4772626a015337dea06da67095aec3862 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 15:02:14 -0400 Subject: [PATCH 076/101] libata: ATAPI command completion tweaks and notes 1) note urgent bug, that completes command twice 2) only fix up INQUIRY data if the SCSI version is zero (typically indicates ATAPI MMC-ish device) 3) if there is a problem on the ATA bus, don't bother with REQUEST SENSE, just directly handle the error based on Status/Error registers. --- drivers/scsi/libata-scsi.c | 31 ++++++++++++++++++++++++++++--- 1 file changed, 28 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 45ebe9fd52ea..1a1ef3429e55 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1483,9 +1483,18 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; - if (unlikely(drv_stat & (ATA_ERR | ATA_BUSY | ATA_DRQ))) { + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) + ata_to_sense_error(qc, drv_stat); + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); + /* FIXME: command completion with check condition + * but no sense causes the error handler to run, + * which then issues REQUEST SENSE, fills in the sense + * buffer, and completes the command (for the second + * time). We need to issue REQUEST SENSE some other + * way, to avoid completing the command twice. + */ cmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); @@ -1499,10 +1508,26 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) unsigned int buflen; buflen = ata_scsi_rbuf_get(cmd, &buf); - buf[2] = 0x5; - buf[3] = (buf[3] & 0xf0) | 2; + + /* ATAPI devices typically report zero for their SCSI version, + * and sometimes deviate from the spec WRT response data + * format. If SCSI version is reported as zero like normal, + * then we make the following fixups: 1) Fake MMC-5 version, + * to indicate to the Linux scsi midlayer this is a modern + * device. 2) Ensure response data format / ATAPI information + * are always correct. + */ + /* FIXME: do we ever override EVPD pages and the like, with + * this code? + */ + if (buf[2] == 0) { + buf[2] = 0x5; + buf[3] = 0x32; + } + ata_scsi_rbuf_put(cmd, buf); } + cmd->result = SAM_STAT_GOOD; } From fab10fe37ad8dc4388fc444c89ef5aefe906354f Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Wed, 5 Oct 2005 12:08:13 -0700 Subject: [PATCH 077/101] [MCAST] ipv6: Fix address size in grec_size Signed-Off-By: Yan Zheng Acked-by: YOSHIFUJI Hideaki Acked-by: David L Stevens Signed-off-by: David S. Miller --- net/ipv6/mcast.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c index 519899fb11d5..39a96c768102 100644 --- a/net/ipv6/mcast.c +++ b/net/ipv6/mcast.c @@ -1393,7 +1393,7 @@ static void mld_sendpack(struct sk_buff *skb) static int grec_size(struct ifmcaddr6 *pmc, int type, int gdel, int sdel) { - return sizeof(struct mld2_grec) + 4*mld_scount(pmc,type,gdel,sdel); + return sizeof(struct mld2_grec) + 16 * mld_scount(pmc,type,gdel,sdel); } static struct sk_buff *add_grhead(struct sk_buff *skb, struct ifmcaddr6 *pmc, From 42a39450f830c57432fd4e5644fa81f41ce7156d Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 5 Oct 2005 12:09:31 -0700 Subject: [PATCH 078/101] [TCP]: BIC coding bug in Linux 2.6.13 Missing parenthesis in causes BIC to be slow in increasing congestion window. Spotted by Injong Rhee. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller --- net/ipv4/tcp_bic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv4/tcp_bic.c b/net/ipv4/tcp_bic.c index b940346de4e7..6d80e063c187 100644 --- a/net/ipv4/tcp_bic.c +++ b/net/ipv4/tcp_bic.c @@ -136,7 +136,7 @@ static inline void bictcp_update(struct bictcp *ca, u32 cwnd) else if (cwnd < ca->last_max_cwnd + max_increment*(BICTCP_B-1)) /* slow start */ ca->cnt = (cwnd * (BICTCP_B-1)) - / cwnd-ca->last_max_cwnd; + / (cwnd - ca->last_max_cwnd); else /* linear increase */ ca->cnt = cwnd / max_increment; From 140e26fcd559f6988e5a9056385eecade19d9b49 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Wed, 5 Oct 2005 12:11:41 -0700 Subject: [PATCH 079/101] [IPV6]: Fix NS handing for proxy/anycast address Timer set up by pneigh_enqueue() ended up calling ndisc_rcv() via pndisc_redo(), which clears LOCALLY_ENQUEUED flag in NEIGH_CB(skb) and NS was queued again. Let's call ndisc_recv_ns() directly to avoid the loop. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller --- net/ipv6/ndisc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c index 555a31347eda..305d9ee6d7db 100644 --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1450,7 +1450,7 @@ void ndisc_send_redirect(struct sk_buff *skb, struct neighbour *neigh, static void pndisc_redo(struct sk_buff *skb) { - ndisc_rcv(skb); + ndisc_recv_ns(skb); kfree_skb(skb); } From 77d8d7a6848c81084f413e1ec4982123a56e2ccb Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Wed, 5 Oct 2005 12:15:12 -0700 Subject: [PATCH 080/101] [IPSEC]: Document that policy direction is derived from the index. Here is a patch that adds a helper called xfrm_policy_id2dir to document the fact that the policy direction can be and is derived from the index. This is based on a patch by YOSHIFUJI Hideaki and 210313105@suda.edu.cn. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller --- include/net/xfrm.h | 5 +++++ net/key/af_key.c | 11 ++++++++--- net/xfrm/xfrm_policy.c | 4 ++-- 3 files changed, 15 insertions(+), 5 deletions(-) diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 7564b2ce449f..b6e72f890c6c 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -931,4 +931,9 @@ static inline int xfrm_addr_cmp(xfrm_address_t *a, xfrm_address_t *b, } } +static inline int xfrm_policy_id2dir(u32 index) +{ + return index & 7; +} + #endif /* _NET_XFRM_H */ diff --git a/net/key/af_key.c b/net/key/af_key.c index 50d0a31c3ba6..bbf0f69181ba 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2154,6 +2154,7 @@ out: static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, struct sadb_msg *hdr, void **ext_hdrs) { + unsigned int dir; int err; struct sadb_x_policy *pol; struct xfrm_policy *xp; @@ -2162,7 +2163,11 @@ static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, struct sadb_msg *h if ((pol = ext_hdrs[SADB_X_EXT_POLICY-1]) == NULL) return -EINVAL; - xp = xfrm_policy_byid(0, pol->sadb_x_policy_id, + dir = xfrm_policy_id2dir(pol->sadb_x_policy_id); + if (dir >= XFRM_POLICY_MAX) + return -EINVAL; + + xp = xfrm_policy_byid(dir, pol->sadb_x_policy_id, hdr->sadb_msg_type == SADB_X_SPDDELETE2); if (xp == NULL) return -ENOENT; @@ -2174,9 +2179,9 @@ static int pfkey_spdget(struct sock *sk, struct sk_buff *skb, struct sadb_msg *h if (hdr->sadb_msg_type == SADB_X_SPDDELETE2) { c.data.byid = 1; c.event = XFRM_MSG_DELPOLICY; - km_policy_notify(xp, pol->sadb_x_policy_dir-1, &c); + km_policy_notify(xp, dir, &c); } else { - err = key_pol_get_resp(sk, xp, hdr, pol->sadb_x_policy_dir-1); + err = key_pol_get_resp(sk, xp, hdr, dir); } xfrm_pol_put(xp); diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index c6a0d34fc295..061b44cc2451 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -163,7 +163,7 @@ static void xfrm_policy_timer(unsigned long data) if (xp->dead) goto out; - dir = xp->index & 7; + dir = xfrm_policy_id2dir(xp->index); if (xp->lft.hard_add_expires_seconds) { long tmo = xp->lft.hard_add_expires_seconds + @@ -417,7 +417,7 @@ struct xfrm_policy *xfrm_policy_byid(int dir, u32 id, int delete) struct xfrm_policy *pol, **p; write_lock_bh(&xfrm_policy_lock); - for (p = &xfrm_policy_list[id & 7]; (pol=*p)!=NULL; p = &pol->next) { + for (p = &xfrm_policy_list[dir]; (pol=*p)!=NULL; p = &pol->next) { if (pol->index == id) { xfrm_pol_hold(pol); if (delete) From 3a867b36c3234673e61f883ebc11ad18f80a176f Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 5 Oct 2005 12:16:04 -0700 Subject: [PATCH 081/101] [AX.25]: Fix packet socket crash Since changeset 98a82febb6340466824c3a453738d4fbd05db81a AX.25 is passing received IP and ARP packets to the stack through netif_rx() but we don't set the skb->mac.raw to right value which may result in a crash with applications that use a packet socket. Signed-off-by: Ralf Baechle DL5RB Signed-off-by: David S. Miller --- net/ax25/ax25_in.c | 2 +- net/netrom/nr_dev.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/net/ax25/ax25_in.c b/net/ax25/ax25_in.c index 810c9c76c2e0..73cfc3411c46 100644 --- a/net/ax25/ax25_in.c +++ b/net/ax25/ax25_in.c @@ -123,7 +123,7 @@ int ax25_rx_iframe(ax25_cb *ax25, struct sk_buff *skb) } skb_pull(skb, 1); /* Remove PID */ - skb->h.raw = skb->data; + skb->mac.raw = skb->nh.raw; skb->nh.raw = skb->data; skb->dev = ax25->ax25_dev->dev; skb->pkt_type = PACKET_HOST; diff --git a/net/netrom/nr_dev.c b/net/netrom/nr_dev.c index 4e66eef9a034..509afddae569 100644 --- a/net/netrom/nr_dev.c +++ b/net/netrom/nr_dev.c @@ -58,7 +58,7 @@ int nr_rx_ip(struct sk_buff *skb, struct net_device *dev) /* Spoof incoming device */ skb->dev = dev; - skb->h.raw = skb->data; + skb->mac.raw = skb->nh.raw; skb->nh.raw = skb->data; skb->pkt_type = PACKET_HOST; From 782c3fd470abddf2525e34cf3131215a8f95e834 Mon Sep 17 00:00:00 2001 From: Martin Habets Date: Wed, 5 Oct 2005 12:21:36 -0700 Subject: [PATCH 082/101] [SPARC]: Remove some duplicated sparc32 config items Remove some duplicated items due to the inclusion of the general drivers/Kconfig file. These are now taken from drivers/char/Kconfig, and can be turned off there as well (which is desirable sometimes). Signed-off-by: Martin Habets Signed-off-by: David S. Miller --- arch/sparc/Kconfig | 56 ---------------------------------------------- 1 file changed, 56 deletions(-) diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index aba05394d30a..6537445dac0e 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -25,62 +25,6 @@ source "init/Kconfig" menu "General machine setup" -config VT - bool - select INPUT - default y - ---help--- - If you say Y here, you will get support for terminal devices with - display and keyboard devices. These are called "virtual" because you - can run several virtual terminals (also called virtual consoles) on - one physical terminal. This is rather useful, for example one - virtual terminal can collect system messages and warnings, another - one can be used for a text-mode user session, and a third could run - an X session, all in parallel. Switching between virtual terminals - is done with certain key combinations, usually Alt-. - - The setterm command ("man setterm") can be used to change the - properties (such as colors or beeping) of a virtual terminal. The - man page console_codes(4) ("man console_codes") contains the special - character sequences that can be used to change those properties - directly. The fonts used on virtual terminals can be changed with - the setfont ("man setfont") command and the key bindings are defined - with the loadkeys ("man loadkeys") command. - - You need at least one virtual terminal device in order to make use - of your keyboard and monitor. Therefore, only people configuring an - embedded system would want to say N here in order to save some - memory; the only way to log into such a system is then via a serial - or network connection. - - If unsure, say Y, or else you won't be able to do much with your new - shiny Linux system :-) - -config VT_CONSOLE - bool - default y - ---help--- - The system console is the device which receives all kernel messages - and warnings and which allows logins in single user mode. If you - answer Y here, a virtual terminal (the device used to interact with - a physical terminal) can be used as system console. This is the most - common mode of operations, so you should say Y here unless you want - the kernel messages be output only to a serial port (in which case - you should say Y to "Console on serial port", below). - - If you do say Y here, by default the currently visible virtual - terminal (/dev/tty0) will be used as system console. You can change - that with a kernel command line option such as "console=tty3" which - would use the third virtual terminal as system console. (Try "man - bootparam" or see the documentation of your boot loader (lilo or - loadlin) about how to pass options to the kernel at boot time.) - - If unsure, say Y. - -config HW_CONSOLE - bool - default y - config SMP bool "Symmetric multi-processing support (does not work on sun4/sun4c)" depends on BROKEN From a939c9631527053aa38aa8795a6f7203c7f20b69 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 17:09:16 -0400 Subject: [PATCH 083/101] libata: move atapi_request_sense() to libata-scsi module No content changes, just moving code around. --- drivers/scsi/libata-core.c | 49 +------------------------------------- drivers/scsi/libata-scsi.c | 46 +++++++++++++++++++++++++++++++++++ drivers/scsi/libata.h | 3 +++ 3 files changed, 50 insertions(+), 48 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index ceffaef37d17..f731bbdd4236 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -71,7 +71,6 @@ static int fgb(u32 bitmap); static int ata_choose_xfer_mode(struct ata_port *ap, u8 *xfer_mode_out, unsigned int *xfer_shift_out); -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); static void __ata_qc_complete(struct ata_queued_cmd *qc); static unsigned int ata_unique_id = 1; @@ -3015,52 +3014,6 @@ fsm_start: goto fsm_start; } -static void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, - struct scsi_cmnd *cmd) -{ - DECLARE_COMPLETION(wait); - struct ata_queued_cmd *qc; - unsigned long flags; - int rc; - - DPRINTK("ATAPI request sense\n"); - - qc = ata_qc_new_init(ap, dev); - BUG_ON(qc == NULL); - - /* FIXME: is this needed? */ - memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); - - ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); - qc->dma_dir = DMA_FROM_DEVICE; - - memset(&qc->cdb, 0, ap->cdb_len); - qc->cdb[0] = REQUEST_SENSE; - qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; - - qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; - qc->tf.command = ATA_CMD_PACKET; - - qc->tf.protocol = ATA_PROT_ATAPI; - qc->tf.lbam = (8 * 1024) & 0xff; - qc->tf.lbah = (8 * 1024) >> 8; - qc->nbytes = SCSI_SENSE_BUFFERSIZE; - - qc->waiting = &wait; - qc->complete_fn = ata_qc_complete_noop; - - spin_lock_irqsave(&ap->host_set->lock, flags); - rc = ata_qc_issue(qc); - spin_unlock_irqrestore(&ap->host_set->lock, flags); - - if (rc) - ata_port_disable(ap); - else - wait_for_completion(&wait); - - DPRINTK("EXIT\n"); -} - /** * ata_qc_timeout - Handle timeout of queued command * @qc: Command that timed out @@ -3254,7 +3207,7 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, return qc; } -static int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) +int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat) { return 0; } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1a1ef3429e55..c58a7a19780f 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1479,6 +1479,52 @@ void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 done(cmd); } +void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd) +{ + DECLARE_COMPLETION(wait); + struct ata_queued_cmd *qc; + unsigned long flags; + int rc; + + DPRINTK("ATAPI request sense\n"); + + qc = ata_qc_new_init(ap, dev); + BUG_ON(qc == NULL); + + /* FIXME: is this needed? */ + memset(cmd->sense_buffer, 0, sizeof(cmd->sense_buffer)); + + ata_sg_init_one(qc, cmd->sense_buffer, sizeof(cmd->sense_buffer)); + qc->dma_dir = DMA_FROM_DEVICE; + + memset(&qc->cdb, 0, ap->cdb_len); + qc->cdb[0] = REQUEST_SENSE; + qc->cdb[4] = SCSI_SENSE_BUFFERSIZE; + + qc->tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; + qc->tf.command = ATA_CMD_PACKET; + + qc->tf.protocol = ATA_PROT_ATAPI; + qc->tf.lbam = (8 * 1024) & 0xff; + qc->tf.lbah = (8 * 1024) >> 8; + qc->nbytes = SCSI_SENSE_BUFFERSIZE; + + qc->waiting = &wait; + qc->complete_fn = ata_qc_complete_noop; + + spin_lock_irqsave(&ap->host_set->lock, flags); + rc = ata_qc_issue(qc); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + if (rc) + ata_port_disable(ap); + else + wait_for_completion(&wait); + + DPRINTK("EXIT\n"); +} + static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index c7a1fa1c9abc..a4b55dc9c698 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -39,6 +39,7 @@ struct ata_scsi_args { /* libata-core.c */ extern int atapi_enabled; +extern int ata_qc_complete_noop(struct ata_queued_cmd *qc, u8 drv_stat); extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap, struct ata_device *dev); extern void ata_qc_free(struct ata_queued_cmd *qc); @@ -51,6 +52,8 @@ extern void swap_buf_le16(u16 *buf, unsigned int buf_words); /* libata-scsi.c */ +extern void atapi_request_sense(struct ata_port *ap, struct ata_device *dev, + struct scsi_cmnd *cmd); extern void ata_scsi_scan_host(struct ata_port *ap); extern void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat); extern int ata_scsi_error(struct Scsi_Host *host); From afb0edd922c7ed6e73678730921dfcccebec17e8 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Wed, 5 Oct 2005 17:08:42 -0400 Subject: [PATCH 084/101] [PATCH] libata: Marvell spinlock fixes and simplification This should fix up lockups that people were seeing due to improper spinlock placement. Also, the start/stop DMA routines put guarded trust in the cached state of DMA. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 58 +++++++++++++++++------------------------- 1 file changed, 24 insertions(+), 34 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ecda7df21142..c3084f8b3ee7 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.22" +#define DRV_VERSION "0.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -406,40 +406,30 @@ static void mv_irq_clear(struct ata_port *ap) { } -static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp, - struct ata_port *ap) +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) { - unsigned long flags; - - spin_lock_irqsave(&ap->host_set->lock, flags); - - writelfl(EDMA_EN, base + EDMA_CMD_OFS); - pp->pp_flags |= MV_PP_FLAG_EDMA_EN; - - spin_unlock_irqrestore(&ap->host_set->lock, flags); + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } + assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); } static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct mv_port_priv *pp = ap->private_data; - unsigned long flags; u32 reg; int i; - spin_lock_irqsave(&ap->host_set->lock, flags); - - if (!(MV_PP_FLAG_EDMA_DS_ACT & pp->pp_flags) && - ((MV_PP_FLAG_EDMA_EN & pp->pp_flags) || - (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)))) { - /* Disable EDMA if we're not already trying to disable it - * and it is currently active. The disable bit auto clears. + if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + /* Disable EDMA if active. The disable bit auto clears. */ - pp->pp_flags |= MV_PP_FLAG_EDMA_DS_ACT; writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; - } - spin_unlock_irqrestore(&ap->host_set->lock, flags); + } else { + assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + } /* now properly wait for the eDMA to stop */ for (i = 1000; i > 0; i--) { @@ -450,12 +440,9 @@ static void mv_stop_dma(struct ata_port *ap) udelay(100); } - spin_lock_irqsave(&ap->host_set->lock, flags); - pp->pp_flags &= ~MV_PP_FLAG_EDMA_DS_ACT; - spin_unlock_irqrestore(&ap->host_set->lock, flags); - if (EDMA_EN & reg) { printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + /* FIXME: Consider doing a reset here to recover */ } } @@ -716,8 +703,11 @@ static void mv_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + spin_lock_irqsave(&ap->host_set->lock, flags); mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); ap->private_data = NULL; dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); @@ -867,11 +857,7 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) mv_inc_q_index(&pp->req_producer); /* now incr producer index */ - if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { - /* turn on EDMA if not already on */ - mv_start_dma(port_mmio, pp, qc->ap); - } - assert(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + mv_start_dma(port_mmio, pp); /* and write the request in pointer to kick the EDMA to life */ in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; @@ -921,8 +907,12 @@ static void mv_err_intr(struct ata_port *ap) serr = scr_read(ap, SCR_ERROR); scr_write_flush(ap, SCR_ERROR, serr); } - DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n", - ap->port_no, edma_err_cause, serr); + if (EDMA_ERR_SELF_DIS & edma_err_cause) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " + "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -1034,7 +1024,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", readl(mmio + PCI_IRQ_CAUSE_OFS)); - VPRINTK("All regs @ PCI error\n"); + DPRINTK("All regs @ PCI error\n"); mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); From 05b308e1df6d9d673daedb517969241f41278b52 Mon Sep 17 00:00:00 2001 From: Brett Russ Date: Wed, 5 Oct 2005 17:08:53 -0400 Subject: [PATCH 085/101] [PATCH] libata: Marvell function headers adds helpful function header comments. Signed-off-by: Brett Russ Signed-off-by: Jeff Garzik --- drivers/scsi/sata_mv.c | 225 +++++++++++++++++++++++++++++++++++++++-- 1 file changed, 219 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index c3084f8b3ee7..84b488f81c75 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -35,7 +35,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.23" +#define DRV_VERSION "0.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -406,6 +406,17 @@ static void mv_irq_clear(struct ata_port *ap) { } +/** + * mv_start_dma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) { if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { @@ -415,6 +426,16 @@ static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); } +/** + * mv_stop_dma - Disable eDMA engine + * @ap: ATA channel to manipulate + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -561,7 +582,15 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -/* This routine only applies to 6xxx parts */ +/** + * mv_global_soft_reset - Perform the 6xxx global soft reset + * @mmio_base: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; @@ -617,6 +646,16 @@ done: return rc; } +/** + * mv_host_stop - Host specific cleanup/stop routine. + * @host_set: host data structure + * + * Disable ints, cleanup host memory, call general purpose + * host_stop. + * + * LOCKING: + * Inherited from caller. + */ static void mv_host_stop(struct ata_host_set *host_set) { struct mv_host_priv *hpriv = host_set->private_data; @@ -631,6 +670,16 @@ static void mv_host_stop(struct ata_host_set *host_set) ata_host_stop(host_set); } +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ static int mv_port_start(struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -699,6 +748,15 @@ static int mv_port_start(struct ata_port *ap) return 0; } +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host_set lock to protect the DMA stop. + */ static void mv_port_stop(struct ata_port *ap) { struct device *dev = ap->host_set->dev; @@ -714,6 +772,15 @@ static void mv_port_stop(struct ata_port *ap) kfree(pp); } +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ static void mv_fill_sg(struct ata_queued_cmd *qc) { struct mv_port_priv *pp = qc->ap->private_data; @@ -748,6 +815,18 @@ static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) (last ? CRQB_CMD_LAST : 0); } +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ static void mv_qc_prep(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; @@ -830,6 +909,18 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) mv_fill_sg(qc); } +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ static int mv_qc_issue(struct ata_queued_cmd *qc) { void __iomem *port_mmio = mv_ap_base(qc->ap); @@ -867,6 +958,19 @@ static int mv_qc_issue(struct ata_queued_cmd *qc) return 0; } +/** + * mv_get_crpb_status - get status from most recently completed cmd + * @ap: ATA channel to manipulate + * + * This routine is for use when the port is in DMA mode, when it + * will be using the CRPB (command response block) method of + * returning command completion information. We assert indices + * are good, grab status, and bump the response consumer index to + * prove that we're up to date. + * + * LOCKING: + * Inherited from caller. + */ static u8 mv_get_crpb_status(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -896,6 +1000,19 @@ static u8 mv_get_crpb_status(struct ata_port *ap) return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); } +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * + * In most cases, just clear the interrupt and move on. However, + * some cases require an eDMA reset, which is done right before + * the COMRESET in mv_phy_reset(). The SERR case requires a + * clear of pending errors in the SATA SERROR register. Finally, + * if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ static void mv_err_intr(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); @@ -923,7 +1040,22 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC */ +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host_set: host specific structure + * @relevant: port error bits relevant to this host controller + * @hc: which host controller we're to look at + * + * Read then write clear the HC interrupt status then walk each + * port connected to the HC and see if it needs servicing. Port + * success ints are reported in the HC interrupt status reg, the + * port error ints are reported in the higher level main + * interrupt status register and thus are passed in via the + * 'relevant' argument. + * + * LOCKING: + * Inherited from caller. + */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) { @@ -993,6 +1125,21 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, VPRINTK("EXIT\n"); } +/** + * mv_interrupt - + * @irq: unused + * @dev_instance: private data; in this case the host structure + * @regs: unused + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host_set lock while processing pending + * interrupts. + */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { @@ -1035,14 +1182,32 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_RETVAL(handled); } +/** + * mv_check_err - Return the error shadow register to caller. + * @ap: ATA channel to manipulate + * + * Marvell requires DMA to be stopped before accessing shadow + * registers. So we do that, then return the needed register. + * + * LOCKING: + * Inherited from caller. FIXME: protect mv_stop_dma with lock? + */ static u8 mv_check_err(struct ata_port *ap) { mv_stop_dma(ap); /* can't read shadow regs if DMA on */ return readb((void __iomem *) ap->ioaddr.error_addr); } -/* Part of this is taken from __sata_phy_reset and modified to not sleep - * since this routine gets called from interrupt level. +/** + * mv_phy_reset - Perform eDMA reset followed by COMRESET + * @ap: ATA channel to manipulate + * + * Part of this is taken from __sata_phy_reset and modified to + * not sleep since this routine gets called from interrupt level. + * + * LOCKING: + * Inherited from caller. This is coded to safe to call at + * interrupt level, i.e. it does not sleep. */ static void mv_phy_reset(struct ata_port *ap) { @@ -1105,6 +1270,16 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } +/** + * mv_eng_timeout - Routine called by libata when SCSI times out I/O + * @ap: ATA channel to manipulate + * + * Intent is to clear all pending error conditions, reset the + * chip/bus, fail the command, and move on. + * + * LOCKING: + * This routine holds the host_set lock while failing the command. + */ static void mv_eng_timeout(struct ata_port *ap) { struct ata_queued_cmd *qc; @@ -1140,6 +1315,18 @@ static void mv_eng_timeout(struct ata_port *ap) } } +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; @@ -1177,6 +1364,16 @@ static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +/** + * mv_host_init - Perform some early initialization of the host. + * @probe_ent: early data struct representing the host + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_host_init(struct ata_probe_ent *probe_ent) { int rc = 0, n_hc, port, hc; @@ -1226,7 +1423,15 @@ done: return rc; } -/* FIXME: complete this */ +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @probe_ent: early data struct representing the host + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ static void mv_print_info(struct ata_probe_ent *probe_ent) { struct pci_dev *pdev = to_pci_dev(probe_ent->dev); @@ -1253,6 +1458,14 @@ static void mv_print_info(struct ata_probe_ent *probe_ent) scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); } +/** + * mv_init_one - handle a positive probe of a Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; From 8a70f8dc08dd40b7f8ac77280eaa99a8c6bc46f4 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 17:19:47 -0400 Subject: [PATCH 086/101] [libata sata_mv] fix warning shuffle ifdef location to fix the following warning: drivers/scsi/sata_mv.c:471: warning: 'mv_dump_mem' defined but not used --- drivers/scsi/sata_mv.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index 84b488f81c75..d457f5673476 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -467,9 +467,9 @@ static void mv_stop_dma(struct ata_port *ap) } } +#ifdef ATA_DEBUG static void mv_dump_mem(void __iomem *start, unsigned bytes) { -#ifdef ATA_DEBUG int b, w; for (b = 0; b < bytes; ) { DPRINTK("%p: ", start + b); @@ -479,8 +479,9 @@ static void mv_dump_mem(void __iomem *start, unsigned bytes) } printk("\n"); } -#endif } +#endif + static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) { #ifdef ATA_DEBUG From e03eb5272b670e5002463c95fdc023410ba18484 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 5 Oct 2005 23:06:36 +0100 Subject: [PATCH 087/101] [ARM] 2954/1: Allow D and I cache and branch prediction disabling for ARMv6 Patch from Catalin Marinas There is no reason to not allow these config options. They are useful when the hardware has problems. Signed-off-by: Catalin Marinas Signed-off-by: Russell King --- arch/arm/mm/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index db5e47dfc303..c54e04c995ee 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -370,21 +370,21 @@ config CPU_BIG_ENDIAN config CPU_ICACHE_DISABLE bool "Disable I-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 + depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 help Say Y here to disable the processor instruction cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_DISABLE bool "Disable D-Cache" - depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 + depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6 help Say Y here to disable the processor data cache. Unless you have a reason not to or are unsure, say N. config CPU_DCACHE_WRITETHROUGH bool "Force write through D-cache" - depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020) && !CPU_DCACHE_DISABLE + depends on (CPU_ARM920T || CPU_ARM922T || CPU_ARM925T || CPU_ARM926T || CPU_ARM1020 || CPU_V6) && !CPU_DCACHE_DISABLE default y if CPU_ARM925T help Say Y here to use the data cache in writethrough mode. Unless you @@ -399,7 +399,7 @@ config CPU_CACHE_ROUND_ROBIN config CPU_BPREDICT_DISABLE bool "Disable branch prediction" - depends on CPU_ARM1020 + depends on CPU_ARM1020 || CPU_V6 help Say Y here to disable branch prediction. If unsure, say N. From 9ad98c5b4461e7dfa3754963200993a68825eab4 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 5 Oct 2005 15:12:00 -0700 Subject: [PATCH 088/101] [SPARC64]: Fix initrd when net booting. By allocating early memory for the firmware page tables, we can write over the beginning of the initrd image. So what we do now is: 1) Read in firmware translations table while still on the firmware's trap table. 2) Switch to Linux trap table. 3) Init bootmem. 4) Build firmware page tables using __alloc_bootmem(). And this keeps the initrd from being clobbered. Signed-off-by: David S. Miller --- arch/sparc64/mm/init.c | 156 +++++++++++++++-------------------------- 1 file changed, 56 insertions(+), 100 deletions(-) diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c index 4e2f71e0abc8..0d2e967c7200 100644 --- a/arch/sparc64/mm/init.c +++ b/arch/sparc64/mm/init.c @@ -368,6 +368,7 @@ struct linux_prom_translation { unsigned long data; }; static struct linux_prom_translation prom_trans[512] __initdata; +static unsigned int prom_trans_ents __initdata; extern unsigned long prom_boot_page; extern void prom_remap(unsigned long physpage, unsigned long virtpage, int mmu_ihandle); @@ -381,57 +382,7 @@ unsigned long kern_locked_tte_data; unsigned long prom_pmd_phys __read_mostly; unsigned int swapper_pgd_zero __read_mostly; -/* Allocate power-of-2 aligned chunks from the end of the - * kernel image. Return physical address. - */ -static inline unsigned long early_alloc_phys(unsigned long size) -{ - unsigned long base; - - BUILD_BUG_ON(size & (size - 1)); - - kern_size = (kern_size + (size - 1)) & ~(size - 1); - base = kern_base + kern_size; - kern_size += size; - - return base; -} - -static inline unsigned long load_phys32(unsigned long pa) -{ - unsigned long val; - - __asm__ __volatile__("lduwa [%1] %2, %0" - : "=&r" (val) - : "r" (pa), "i" (ASI_PHYS_USE_EC)); - - return val; -} - -static inline unsigned long load_phys64(unsigned long pa) -{ - unsigned long val; - - __asm__ __volatile__("ldxa [%1] %2, %0" - : "=&r" (val) - : "r" (pa), "i" (ASI_PHYS_USE_EC)); - - return val; -} - -static inline void store_phys32(unsigned long pa, unsigned long val) -{ - __asm__ __volatile__("stwa %0, [%1] %2" - : /* no outputs */ - : "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC)); -} - -static inline void store_phys64(unsigned long pa, unsigned long val) -{ - __asm__ __volatile__("stxa %0, [%1] %2" - : /* no outputs */ - : "r" (val), "r" (pa), "i" (ASI_PHYS_USE_EC)); -} +static pmd_t *prompmd __read_mostly; #define BASE_PAGE_SIZE 8192 @@ -441,34 +392,28 @@ static inline void store_phys64(unsigned long pa, unsigned long val) */ unsigned long prom_virt_to_phys(unsigned long promva, int *error) { - unsigned long pmd_phys = (prom_pmd_phys + - ((promva >> 23) & 0x7ff) * sizeof(pmd_t)); - unsigned long pte_phys; - pmd_t pmd_ent; - pte_t pte_ent; + pmd_t *pmdp = prompmd + ((promva >> 23) & 0x7ff); + pte_t *ptep; unsigned long base; - pmd_val(pmd_ent) = load_phys32(pmd_phys); - if (pmd_none(pmd_ent)) { + if (pmd_none(*pmdp)) { if (error) *error = 1; return 0; } - - pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL; - pte_phys += ((promva >> 13) & 0x3ff) * sizeof(pte_t); - pte_val(pte_ent) = load_phys64(pte_phys); - if (!pte_present(pte_ent)) { + ptep = (pte_t *)__pmd_page(*pmdp) + ((promva >> 13) & 0x3ff); + if (!pte_present(*ptep)) { if (error) *error = 1; return 0; } if (error) { *error = 0; - return pte_val(pte_ent); + return pte_val(*ptep); } - base = pte_val(pte_ent) & _PAGE_PADDR; - return (base + (promva & (BASE_PAGE_SIZE - 1))); + base = pte_val(*ptep) & _PAGE_PADDR; + + return base + (promva & (BASE_PAGE_SIZE - 1)); } /* The obp translations are saved based on 8k pagesize, since obp can @@ -481,25 +426,20 @@ static void __init build_obp_range(unsigned long start, unsigned long end, unsig unsigned long vaddr; for (vaddr = start; vaddr < end; vaddr += BASE_PAGE_SIZE) { - unsigned long val, pte_phys, pmd_phys; - pmd_t pmd_ent; - int i; + unsigned long val; + pmd_t *pmd; + pte_t *pte; - pmd_phys = (prom_pmd_phys + - (((vaddr >> 23) & 0x7ff) * sizeof(pmd_t))); - pmd_val(pmd_ent) = load_phys32(pmd_phys); - if (pmd_none(pmd_ent)) { - pte_phys = early_alloc_phys(BASE_PAGE_SIZE); - - for (i = 0; i < BASE_PAGE_SIZE / sizeof(pte_t); i++) - store_phys64(pte_phys+i*sizeof(pte_t),0); - - pmd_val(pmd_ent) = pte_phys >> 11UL; - store_phys32(pmd_phys, pmd_val(pmd_ent)); + pmd = prompmd + ((vaddr >> 23) & 0x7ff); + if (pmd_none(*pmd)) { + pte = __alloc_bootmem(BASE_PAGE_SIZE, BASE_PAGE_SIZE, + PAGE_SIZE); + if (!pte) + prom_halt(); + memset(pte, 0, BASE_PAGE_SIZE); + pmd_set(pmd, pte); } - - pte_phys = (unsigned long)pmd_val(pmd_ent) << 11UL; - pte_phys += (((vaddr >> 13) & 0x3ff) * sizeof(pte_t)); + pte = (pte_t *) __pmd_page(*pmd) + ((vaddr >> 13) & 0x3ff); val = data; @@ -507,7 +447,8 @@ static void __init build_obp_range(unsigned long start, unsigned long end, unsig if (tlb_type == spitfire) val &= ~0x0003fe0000000000UL; - store_phys64(pte_phys, val | _PAGE_MODIFIED); + set_pte_at(&init_mm, vaddr, pte, + __pte(val | _PAGE_MODIFIED)); data += BASE_PAGE_SIZE; } @@ -520,13 +461,17 @@ static inline int in_obp_range(unsigned long vaddr) } #define OBP_PMD_SIZE 2048 -static void __init build_obp_pgtable(int prom_trans_ents) +static void __init build_obp_pgtable(void) { unsigned long i; - prom_pmd_phys = early_alloc_phys(OBP_PMD_SIZE); - for (i = 0; i < OBP_PMD_SIZE; i += 4) - store_phys32(prom_pmd_phys + i, 0); + prompmd = __alloc_bootmem(OBP_PMD_SIZE, OBP_PMD_SIZE, PAGE_SIZE); + if (!prompmd) + prom_halt(); + + memset(prompmd, 0, OBP_PMD_SIZE); + + prom_pmd_phys = __pa(prompmd); for (i = 0; i < prom_trans_ents; i++) { unsigned long start, end; @@ -546,7 +491,7 @@ static void __init build_obp_pgtable(int prom_trans_ents) /* Read OBP translations property into 'prom_trans[]'. * Return the number of entries. */ -static int __init read_obp_translations(void) +static void __init read_obp_translations(void) { int n, node; @@ -567,8 +512,10 @@ static int __init read_obp_translations(void) prom_printf("prom_mappings: Couldn't get property.\n"); prom_halt(); } + n = n / sizeof(struct linux_prom_translation); - return n; + + prom_trans_ents = n; } static void __init remap_kernel(void) @@ -605,19 +552,21 @@ static void __init remap_kernel(void) } } -static void __init inherit_prom_mappings(void) -{ - int n; - n = read_obp_translations(); - build_obp_pgtable(n); +static void __init inherit_prom_mappings_pre(void) +{ + read_obp_translations(); /* Now fixup OBP's idea about where we really are mapped. */ prom_printf("Remapping the kernel... "); remap_kernel(); prom_printf("done.\n"); +} +static void __init inherit_prom_mappings_post(void) +{ + build_obp_pgtable(); register_prom_callbacks(); } @@ -1570,8 +1519,7 @@ void __init paging_init(void) swapper_pgd_zero = pgd_val(swapper_pg_dir[0]); - /* Inherit non-locked OBP mappings. */ - inherit_prom_mappings(); + inherit_prom_mappings_pre(); /* Ok, we can use our TLB miss and window trap handlers safely. * We need to do a quick peek here to see if we are on StarFire @@ -1582,15 +1530,23 @@ void __init paging_init(void) extern void setup_tba(int); setup_tba(this_is_starfire); } - - inherit_locked_prom_mappings(1); - __flush_tlb_all(); + /* Everything from this point forward, until we are done with + * inherit_prom_mappings_post(), must complete successfully + * without calling into the firmware. The firwmare page tables + * have not been built, but we are running on the Linux kernel's + * trap table. + */ + /* Setup bootmem... */ pages_avail = 0; last_valid_pfn = end_pfn = bootmem_init(&pages_avail); + inherit_prom_mappings_post(); + + inherit_locked_prom_mappings(1); + #ifdef CONFIG_DEBUG_PAGEALLOC kernel_physical_mapping_init(); #endif From e12669e774be403c84baa651306d305752a35cd8 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Oct 2005 18:39:23 -0400 Subject: [PATCH 089/101] libata: minor cleanups A few code shuffles, to make merging future code easier. Add (DRIVER_SENSE << 24) to certain result codes, as noted by Douglas Gilbert. --- drivers/scsi/libata-core.c | 6 +++--- drivers/scsi/libata-scsi.c | 12 ++++++++---- 2 files changed, 11 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index f731bbdd4236..d568914c4344 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -3131,14 +3131,14 @@ void ata_eng_timeout(struct ata_port *ap) DPRINTK("ENTER\n"); qc = ata_qc_from_tag(ap, ap->active_tag); - if (!qc) { + if (qc) + ata_qc_timeout(qc); + else { printk(KERN_ERR "ata%u: BUG: timeout without command\n", ap->id); goto out; } - ata_qc_timeout(qc); - out: DPRINTK("EXIT\n"); } diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index c58a7a19780f..1c3a10fb3c44 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -225,7 +225,7 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; /* * Is this an error we can process/parse @@ -1468,7 +1468,7 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = SAM_STAT_CHECK_CONDITION; + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; cmd->sense_buffer[0] = 0x70; cmd->sense_buffer[2] = ILLEGAL_REQUEST; @@ -1529,8 +1529,11 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; + VPRINTK("ENTER, drv_stat == 0x%x\n", drv_stat); + if (unlikely(drv_stat & (ATA_BUSY | ATA_DRQ))) ata_to_sense_error(qc, drv_stat); + else if (unlikely(drv_stat & ATA_ERR)) { DPRINTK("request check condition\n"); @@ -1546,7 +1549,9 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) qc->scsidone(cmd); return 1; - } else { + } + + else { u8 *scsicmd = cmd->cmnd; if (scsicmd[0] == INQUIRY) { @@ -1578,7 +1583,6 @@ static int atapi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) } qc->scsidone(cmd); - return 0; } /** From ad6e90f6d0c4243cc35e07e2681a3323af533ce4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:29 +0900 Subject: [PATCH 090/101] [PATCH] sil24: ignore non-error exception irqs 01_sil24_ignore-non-error-exception-irqs.patch Do not error-finish commands for non-error exception irqs - just ignore them. This is taken from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index d8a2f5f04e82..571302dc48a3 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -489,12 +489,21 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) u32 irq_stat, cmd_err, sstatus, serror; irq_stat = readl(port + PORT_IRQ_STAT); + writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */ + + if (!(irq_stat & PORT_IRQ_ERROR)) { + /* ignore non-completion, non-error irqs for now */ + printk(KERN_WARNING DRV_NAME + "ata%u: non-error exception irq (irq_stat %x)\n", + ap->id, irq_stat); + return; + } + cmd_err = readl(port + PORT_CMD_ERR); sstatus = readl(port + PORT_SSTATUS); serror = readl(port + PORT_SERROR); /* Clear IRQ/errors */ - writel(irq_stat, port + PORT_IRQ_STAT); if (cmd_err) writel(cmd_err, port + PORT_CMD_ERR); if (serror) From 46b93e7bce80a08ea07e250d03b0b596cbd32595 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:34 +0900 Subject: [PATCH 091/101] [PATCH] sil24: remove CMDERR clearing 02_sil24_remove-cmderr-clearing.patch CMDERR register doesn't need clearing. This is from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 571302dc48a3..032d9c093979 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -502,10 +502,6 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) cmd_err = readl(port + PORT_CMD_ERR); sstatus = readl(port + PORT_SSTATUS); serror = readl(port + PORT_SERROR); - - /* Clear IRQ/errors */ - if (cmd_err) - writel(cmd_err, port + PORT_CMD_ERR); if (serror) writel(serror, port + PORT_SERROR); From 6a575fa969beeddd0859f9e9d26ab16c6a0d8d6a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 6 Oct 2005 11:43:39 +0900 Subject: [PATCH 092/101] [PATCH] sil24: implement proper TF register reading & caching 03_sil24_add-tf-reading.patch This patch implements proper TF register reading back and caching and bumps up version to 0.22. This is taken from Edward's driver. Signed-off-by: Tejun Heo sata_sil24.c | 50 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 50 +++++++++++++++++++++++++++++++++++---- 1 file changed, 45 insertions(+), 5 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 032d9c093979..b65194c755f8 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -41,7 +41,7 @@ #include #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.21" /* Silicon Image's preview driver was 0.10 */ +#define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ #define NR_PORTS 4 @@ -216,6 +216,7 @@ struct sil24_cmd_block { struct sil24_port_priv { struct sil24_cmd_block *cmd_block; /* 32 cmd blocks */ dma_addr_t cmd_block_dma; /* DMA base addr for them */ + struct ata_taskfile tf; /* Cached taskfile registers */ }; /* ap->host_set->private_data */ @@ -322,14 +323,25 @@ static struct ata_port_info sil24_port_info[] = { }, }; +static inline void sil24_update_tf(struct ata_port *ap) +{ + struct sil24_port_priv *pp = ap->private_data; + void *port = (void *)ap->ioaddr.cmd_addr; + struct sil24_prb *prb = port; + + ata_tf_from_fis(prb->fis, &pp->tf); +} + static u8 sil24_check_status(struct ata_port *ap) { - return ATA_DRDY; + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.command; } static u8 sil24_check_err(struct ata_port *ap) { - return 0; + struct sil24_port_priv *pp = ap->private_data; + return pp->tf.feature; } static int sil24_scr_map[] = { @@ -485,6 +497,7 @@ static void sil24_eng_timeout(struct ata_port *ap) static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) { struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag); + struct sil24_port_priv *pp = ap->private_data; void *port = (void *)ap->ioaddr.cmd_addr; u32 irq_stat, cmd_err, sstatus, serror; @@ -509,8 +522,22 @@ static void sil24_error_intr(struct ata_port *ap, u32 slot_stat) " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n", ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror); + if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) { + /* + * Device is reporting error, tf registers are valid. + */ + sil24_update_tf(ap); + } else { + /* + * Other errors. libata currently doesn't have any + * mechanism to report these errors. Just turn on + * ATA_ERR. + */ + pp->tf.command = ATA_ERR; + } + if (qc) - ata_qc_complete(qc, ATA_ERR); + ata_qc_complete(qc, pp->tf.command); sil24_reset_controller(ap); } @@ -523,8 +550,19 @@ static inline void sil24_host_intr(struct ata_port *ap) slot_stat = readl(port + PORT_SLOT_STAT); if (!(slot_stat & HOST_SSTAT_ATTN)) { + struct sil24_port_priv *pp = ap->private_data; + /* + * !HOST_SSAT_ATTN guarantees successful completion, + * so reading back tf registers is unnecessary for + * most commands. TODO: read tf registers for + * commands which require these values on successful + * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER, + * DEVICE RESET and READ PORT MULTIPLIER (any more?). + */ + sil24_update_tf(ap); + if (qc) - ata_qc_complete(qc, 0); + ata_qc_complete(qc, pp->tf.command); } else sil24_error_intr(ap, slot_stat); } @@ -579,6 +617,8 @@ static int sil24_port_start(struct ata_port *ap) return -ENOMEM; memset(pp, 0, sizeof(*pp)); + pp->tf.command = ATA_DRDY; + cb = dma_alloc_coherent(dev, cb_size, &cb_dma, GFP_KERNEL); if (!cb) { kfree(pp); From a448a28589a6640736b8af1f2f57616c10bb37d5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 6 Oct 2005 13:09:42 +0100 Subject: [PATCH 093/101] [MFD] Fix gcc4 build errors in ucb1x00-core.c drivers/mfd/ucb1x00-core.c:555: error: static declaration of 'ucb1x00_class' follows non-static declaration drivers/mfd/ucb1x00.h:109: error: previous declaration of 'ucb1x00_class' was here Since ucb1x00_class isn't used by anything, remove the extern declaration and the symbol export. Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 2 -- drivers/mfd/ucb1x00.h | 2 -- 2 files changed, 4 deletions(-) diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 10f6ce1bc0ab..612564ac6f7b 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -642,8 +642,6 @@ static void __exit ucb1x00_exit(void) module_init(ucb1x00_init); module_exit(ucb1x00_exit); -EXPORT_SYMBOL(ucb1x00_class); - EXPORT_SYMBOL(ucb1x00_io_set_dir); EXPORT_SYMBOL(ucb1x00_io_write); EXPORT_SYMBOL(ucb1x00_io_read); diff --git a/drivers/mfd/ucb1x00.h b/drivers/mfd/ucb1x00.h index 6b632644f59a..9c9a647d8b7b 100644 --- a/drivers/mfd/ucb1x00.h +++ b/drivers/mfd/ucb1x00.h @@ -106,8 +106,6 @@ struct ucb1x00_irq { void (*fn)(int, void *); }; -extern struct class ucb1x00_class; - struct ucb1x00 { spinlock_t lock; struct mcp *mcp; From 7f726d125d570f38b9e7c8a2decebc39c0a343dc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 7 Oct 2005 01:43:19 +0900 Subject: [PATCH 094/101] [PATCH] sil24: implement tf_read callback Hello, guys. This patch implements ->tf_read callback for sil24. It didn't use to be necessary but new ata_gen_fixed_sense now makes use of ->tf_read callback. This patch is taken from Edward Falk's driver. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/scsi/sata_sil24.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index b65194c755f8..693330bdc821 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -229,6 +229,7 @@ static u8 sil24_check_status(struct ata_port *ap); static u8 sil24_check_err(struct ata_port *ap); static u32 sil24_scr_read(struct ata_port *ap, unsigned sc_reg); static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val); +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf); static void sil24_phy_reset(struct ata_port *ap); static void sil24_qc_prep(struct ata_queued_cmd *qc); static int sil24_qc_issue(struct ata_queued_cmd *qc); @@ -280,6 +281,8 @@ static struct ata_port_operations sil24_ops = { .check_err = sil24_check_err, .dev_select = ata_noop_dev_select, + .tf_read = sil24_tf_read, + .phy_reset = sil24_phy_reset, .qc_prep = sil24_qc_prep, @@ -372,6 +375,12 @@ static void sil24_scr_write(struct ata_port *ap, unsigned sc_reg, u32 val) } } +static void sil24_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sil24_port_priv *pp = ap->private_data; + *tf = pp->tf; +} + static void sil24_phy_reset(struct ata_port *ap) { __sata_phy_reset(ap); From 76e677e25dd3d8af77d0b3810eacaacaf2f93f2f Mon Sep 17 00:00:00 2001 From: Bryan Sutula Date: Wed, 5 Oct 2005 11:02:06 -0600 Subject: [PATCH 095/101] [IA64] Avoid kernel hang during CMC interrupt storm I've noticed a kernel hang during a storm of CMC interrupts, which was tracked down to the continual execution of the interrupt handler. There's code in the CMC handler that's supposed to disable CMC interrupts and switch to polling mode when it sees a bunch of CMCs. Because disabling CMCs across all CPUs isn't safe in interrupt context, the disable is done with a schedule_work(). But with continual CMC interrupts, the schedule_work() never gets executed. The following patch immediately disables CMC interrupts for the current CPU. This then allows (at least) one CPU to ignore CMC interrupts, execute the schedule_work() code, and disable CMC interrupts on the rest of the CPUs. Acked-by: Keith Owens Signed-off-by: Bryan Sutula Signed-off-by: Tony Luck --- arch/ia64/kernel/mca.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/ia64/kernel/mca.c b/arch/ia64/kernel/mca.c index 6dc726ad7137..d0a5106fba24 100644 --- a/arch/ia64/kernel/mca.c +++ b/arch/ia64/kernel/mca.c @@ -1016,6 +1016,11 @@ ia64_mca_cmc_int_handler(int cmc_irq, void *arg, struct pt_regs *ptregs) cmc_polling_enabled = 1; spin_unlock(&cmc_history_lock); + /* If we're being hit with CMC interrupts, we won't + * ever execute the schedule_work() below. Need to + * disable CMC interrupts on this processor now. + */ + ia64_mca_cmc_vector_disable(NULL); schedule_work(&cmc_disable_work); /* From 829841146878e082613a49581ae252c071057c23 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 6 Oct 2005 21:54:21 -0700 Subject: [PATCH 096/101] Avoid 'names_cache' memory leak with CONFIG_AUDITSYSCALL The nameidata "last.name" is always allocated with "__getname()", and should always be free'd with "__putname()". Using "putname()" without the underscores will leak memory, because the allocation will have been hidden from the AUDITSYSCALL code. Arguably the real bug is that the AUDITSYSCALL code is really broken, but in the meantime this fixes the problem people see. Reported by Robert Derr, patch by Rick Lindsley. Acked-by: Al Viro Signed-off-by: Linus Torvalds --- fs/namei.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/namei.c b/fs/namei.c index 043d587216b5..aa62dbda93ac 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -1551,19 +1551,19 @@ do_link: if (nd->last_type != LAST_NORM) goto exit; if (nd->last.name[nd->last.len]) { - putname(nd->last.name); + __putname(nd->last.name); goto exit; } error = -ELOOP; if (count++==32) { - putname(nd->last.name); + __putname(nd->last.name); goto exit; } dir = nd->dentry; down(&dir->d_inode->i_sem); path.dentry = __lookup_hash(&nd->last, nd->dentry, nd); path.mnt = nd->mnt; - putname(nd->last.name); + __putname(nd->last.name); goto do_last; } From 845c5834d0aa60eb1588397696e7fabbaab2d3b0 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 9 Oct 2005 08:55:41 -0400 Subject: [PATCH 097/101] [libata scsi] add ata_scsi_set_sense helper - add extern ata_scsi_set_sense() to build SCSI fixed sense data and corresponding SCSI status Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 28 ++++++++++++++++++++++++++++ drivers/scsi/libata.h | 2 ++ 2 files changed, 30 insertions(+) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 1c3a10fb3c44..bca9a5016b17 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -1450,6 +1450,34 @@ unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, return 0; } +/** + * ata_scsi_set_sense - Set SCSI sense data and status + * @cmd: SCSI request to be handled + * @sk: SCSI-defined sense key + * @asc: SCSI-defined additional sense code + * @ascq: SCSI-defined additional sense code qualifier + * + * Helper function that builds a valid fixed format, current + * response code and the given sense key (sk), additional sense + * code (asc) and additional sense code qualifier (ascq) with + * a SCSI command status of %SAM_STAT_CHECK_CONDITION and + * DRIVER_SENSE set in the upper bits of scsi_cmnd::result . + * + * LOCKING: + * Not required + */ + +void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) +{ + cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; + + cmd->sense_buffer[0] = 0x70; /* fixed format, current */ + cmd->sense_buffer[2] = sk; + cmd->sense_buffer[7] = 18 - 8; /* additional sense length */ + cmd->sense_buffer[12] = asc; + cmd->sense_buffer[13] = ascq; +} + /** * ata_scsi_badcmd - End a SCSI request with an error * @cmd: SCSI request to be handled diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index a4b55dc9c698..4622e643ffd3 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -80,6 +80,8 @@ extern unsigned int ata_scsiop_report_luns(struct ata_scsi_args *args, u8 *rbuf, extern void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq); +extern void ata_scsi_set_sense(struct scsi_cmnd *cmd, + u8 sk, u8 asc, u8 ascq); extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); From ae00651020413bd7eb5fa3bd0abbd78d7cf1abb2 Mon Sep 17 00:00:00 2001 From: Douglas Gilbert Date: Sun, 9 Oct 2005 09:09:35 -0400 Subject: [PATCH 098/101] [libata scsi] improve scsi error handling with ata_scsi_set_sense() - change "xlat" and "fill" actors in libata-scsi so they are responsible for SCSI status and sense data when they return 1. This allows GOOD status or a specialized error to be set. - yield an error for mode sense requests for saved values [sat-r06] - remove static inlines for ata_bad_scsiop() and ata_bad_cdb() which are no longer used Signed-off-by: Douglas Gilbert Signed-off-by: Jeff Garzik --- drivers/scsi/libata-scsi.c | 184 ++++++++++++++++++++++++------------- drivers/scsi/libata.h | 10 -- 2 files changed, 121 insertions(+), 73 deletions(-) diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index bca9a5016b17..c64169ca7ff0 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -49,6 +49,14 @@ static struct ata_device * ata_scsi_find_dev(struct ata_port *ap, struct scsi_device *scsidev); +static void ata_scsi_invalid_field(struct scsi_cmnd *cmd, + void (*done)(struct scsi_cmnd *)) +{ + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + done(cmd); +} + /** * ata_std_bios_param - generic bios head/sector/cylinder calculator used by sd. * @sdev: SCSI device for which BIOS geometry is to be determined @@ -182,7 +190,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { struct scsi_cmnd *cmd = qc->scsicmd; u8 err = 0; - unsigned char *sb = cmd->sense_buffer; /* Based on the 3ware driver translation table */ static unsigned char sense_table[][4] = { /* BBD|ECC|ID|MAR */ @@ -225,8 +232,6 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) }; int i = 0; - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - /* * Is this an error we can process/parse */ @@ -281,11 +286,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) /* Look for best matches first */ if((sense_table[i][0] & err) == sense_table[i][0]) { - sb[0] = 0x70; - sb[2] = sense_table[i][1]; - sb[7] = 0x0a; - sb[12] = sense_table[i][2]; - sb[13] = sense_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -300,11 +303,9 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) { if(stat_table[i][0] & drv_stat) { - sb[0] = 0x70; - sb[2] = stat_table[i][1]; - sb[7] = 0x0a; - sb[12] = stat_table[i][2]; - sb[13] = stat_table[i][3]; + ata_scsi_set_sense(cmd, sense_table[i][1] /* sk */, + sense_table[i][2] /* asc */, + sense_table[i][3] /* ascq */ ); return; } i++; @@ -313,15 +314,12 @@ void ata_to_sense_error(struct ata_queued_cmd *qc, u8 drv_stat) printk(KERN_ERR "ata%u: called with no error (%02X)!\n", qc->ap->id, drv_stat); /* additional-sense-code[-qualifier] */ - sb[0] = 0x70; - sb[2] = MEDIUM_ERROR; - sb[7] = 0x0A; if (cmd->sc_data_direction == DMA_FROM_DEVICE) { - sb[12] = 0x11; /* "unrecovered read error" */ - sb[13] = 0x04; + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0x11, 0x4); + /* "unrecovered read error" */ } else { - sb[12] = 0x0C; /* "write error - */ - sb[13] = 0x02; /* auto-reallocation failed" */ + ata_scsi_set_sense(cmd, MEDIUM_ERROR, 0xc, 0x2); + /* "write error - auto-reallocation failed" */ } } @@ -430,9 +428,9 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, ; /* ignore IMMED bit, violates sat-r05 */ } if (scsicmd[4] & 0x2) - return 1; /* LOEJ bit set not supported */ + goto invalid_fld; /* LOEJ bit set not supported */ if (((scsicmd[4] >> 4) & 0xf) != 0) - return 1; /* power conditions not supported */ + goto invalid_fld; /* power conditions not supported */ if (scsicmd[4] & 0x1) { tf->nsect = 1; /* 1 sector, lba=0 */ @@ -464,6 +462,11 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc, */ return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; } @@ -623,20 +626,20 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) else if (scsicmd[0] == VERIFY_16) scsi_16_lba_len(scsicmd, &block, &n_block); else - return 1; + goto invalid_fld; if (!n_block) - return 1; + goto nothing_to_do; if (block >= dev_sectors) - return 1; + goto out_of_range; if ((block + n_block) > dev_sectors) - return 1; + goto out_of_range; if (lba48) { if (n_block > (64 * 1024)) - return 1; + goto invalid_fld; } else { if (n_block > 256) - return 1; + goto invalid_fld; } if (lba) { @@ -679,7 +682,7 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) Head: 0-15 Sector: 1-255*/ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - return 1; + goto out_of_range; tf->command = ATA_CMD_VERIFY; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ @@ -690,6 +693,20 @@ static unsigned int ata_scsi_verify_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } /** @@ -754,7 +771,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) break; default: DPRINTK("no-byte command\n"); - return 1; + goto invalid_fld; } /* Check and compose ATA command */ @@ -764,13 +781,13 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) * However, for ATA R/W commands, sector count 0 means * 256 or 65536 sectors, not 0 sectors as in SCSI. */ - return 1; + goto nothing_to_do; if (lba) { if (lba48) { /* The request -may- be too large for LBA48. */ if ((block >> 48) || (n_block > 65536)) - return 1; + goto out_of_range; tf->hob_nsect = (n_block >> 8) & 0xff; @@ -782,7 +799,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for LBA28. */ if ((block >> 28) || (n_block > 256)) - return 1; + goto out_of_range; tf->device |= (block >> 24) & 0xf; } @@ -801,7 +818,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) /* The request -may- be too large for CHS addressing. */ if ((block >> 28) || (n_block > 256)) - return 1; + goto out_of_range; /* Convert LBA to CHS */ track = (u32)block / dev->sectors; @@ -817,7 +834,7 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) Head: 0-15 Sector: 1-255*/ if ((cyl >> 16) || (head >> 4) || (sect >> 8) || (!sect)) - return 1; + goto out_of_range; qc->nsect = n_block; tf->nsect = n_block & 0xff; /* Sector count 0 means 256 sectors */ @@ -828,6 +845,20 @@ static unsigned int ata_scsi_rw_xlat(struct ata_queued_cmd *qc, u8 *scsicmd) } return 0; + +invalid_fld: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +out_of_range: + ata_scsi_set_sense(qc->scsicmd, ILLEGAL_REQUEST, 0x21, 0x0); + /* "Logical Block Address out of range" */ + return 1; + +nothing_to_do: + qc->scsicmd->result = SAM_STAT_GOOD; + return 1; } static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) @@ -859,6 +890,12 @@ static int ata_scsi_qc_complete(struct ata_queued_cmd *qc, u8 drv_stat) * This function sets up an ata_queued_cmd structure for the * SCSI command, and sends that ata_queued_cmd to the hardware. * + * The xlat_func argument (actor) returns 0 if ready to execute + * ATA command, else 1 to finish translation. If 1 is returned + * then cmd->result (and possibly cmd->sense_buffer) are assumed + * to be set reflecting an error condition or clean (early) + * termination. + * * LOCKING: * spin_lock_irqsave(host_set lock) */ @@ -875,7 +912,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc = ata_scsi_qc_new(ap, dev, cmd, done); if (!qc) - return; + goto err_mem; /* data is present; dma-map it */ if (cmd->sc_data_direction == DMA_FROM_DEVICE || @@ -883,7 +920,7 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, if (unlikely(cmd->request_bufflen < 1)) { printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n", ap->id, dev->devno); - goto err_out; + goto err_did; } if (cmd->use_sg) @@ -898,19 +935,28 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev, qc->complete_fn = ata_scsi_qc_complete; if (xlat_func(qc, scsicmd)) - goto err_out; + goto early_finish; /* select device, send command to hardware */ if (ata_qc_issue(qc)) - goto err_out; + goto err_did; VPRINTK("EXIT\n"); return; -err_out: +early_finish: + ata_qc_free(qc); + done(cmd); + DPRINTK("EXIT - early finish (good or error)\n"); + return; + +err_did: ata_qc_free(qc); - ata_bad_cdb(cmd, done); - DPRINTK("EXIT - badcmd\n"); +err_mem: + cmd->result = (DID_ERROR << 16); + done(cmd); + DPRINTK("EXIT - internal\n"); + return; } /** @@ -977,7 +1023,8 @@ static inline void ata_scsi_rbuf_put(struct scsi_cmnd *cmd, u8 *buf) * Mapping the response buffer, calling the command's handler, * and handling the handler's return value. This return value * indicates whether the handler wishes the SCSI command to be - * completed successfully, or not. + * completed successfully (0), or not (in which case cmd->result + * and sense buffer are assumed to be set). * * LOCKING: * spin_lock_irqsave(host_set lock) @@ -996,12 +1043,9 @@ void ata_scsi_rbuf_fill(struct ata_scsi_args *args, rc = actor(args, rbuf, buflen); ata_scsi_rbuf_put(cmd, rbuf); - if (rc) - ata_bad_cdb(cmd, args->done); - else { + if (rc == 0) cmd->result = SAM_STAT_GOOD; - args->done(cmd); - } + args->done(cmd); } /** @@ -1307,8 +1351,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, * in the same manner) */ page_control = scsicmd[2] >> 6; - if ((page_control != 0) && (page_control != 3)) - return 1; + switch (page_control) { + case 0: /* current */ + break; /* supported */ + case 3: /* saved */ + goto saving_not_supp; + case 1: /* changeable */ + case 2: /* defaults */ + default: + goto invalid_fld; + } if (six_byte) output_len = 4; @@ -1339,7 +1391,7 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, break; default: /* invalid page code */ - return 1; + goto invalid_fld; } if (six_byte) { @@ -1352,6 +1404,16 @@ unsigned int ata_scsiop_mode_sense(struct ata_scsi_args *args, u8 *rbuf, } return 0; + +invalid_fld: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x24, 0x0); + /* "Invalid field in cbd" */ + return 1; + +saving_not_supp: + ata_scsi_set_sense(args->cmd, ILLEGAL_REQUEST, 0x39, 0x0); + /* "Saving parameters not supported" */ + return 1; } /** @@ -1496,13 +1558,7 @@ void ata_scsi_set_sense(struct scsi_cmnd *cmd, u8 sk, u8 asc, u8 ascq) void ata_scsi_badcmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *), u8 asc, u8 ascq) { DPRINTK("ENTER\n"); - cmd->result = (DRIVER_SENSE << 24) | SAM_STAT_CHECK_CONDITION; - - cmd->sense_buffer[0] = 0x70; - cmd->sense_buffer[2] = ILLEGAL_REQUEST; - cmd->sense_buffer[7] = 14 - 8; /* addnl. sense len. FIXME: correct? */ - cmd->sense_buffer[12] = asc; - cmd->sense_buffer[13] = ascq; + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, asc, ascq); done(cmd); } @@ -1871,7 +1927,7 @@ void ata_scsi_simulate(u16 *id, case INQUIRY: if (scsicmd[1] & 2) /* is CmdDt set? */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); else if ((scsicmd[1] & 1) == 0) /* is EVPD clear? */ ata_scsi_rbuf_fill(&args, ata_scsiop_inq_std); else if (scsicmd[2] == 0x00) @@ -1881,7 +1937,7 @@ void ata_scsi_simulate(u16 *id, else if (scsicmd[2] == 0x83) ata_scsi_rbuf_fill(&args, ata_scsiop_inq_83); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case MODE_SENSE: @@ -1891,7 +1947,7 @@ void ata_scsi_simulate(u16 *id, case MODE_SELECT: /* unconditionally return */ case MODE_SELECT_10: /* bad-field-in-cdb */ - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case READ_CAPACITY: @@ -1902,7 +1958,7 @@ void ata_scsi_simulate(u16 *id, if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16) ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap); else - ata_bad_cdb(cmd, done); + ata_scsi_invalid_field(cmd, done); break; case REPORT_LUNS: @@ -1914,7 +1970,9 @@ void ata_scsi_simulate(u16 *id, /* all other commands */ default: - ata_bad_scsiop(cmd, done); + ata_scsi_set_sense(cmd, ILLEGAL_REQUEST, 0x20, 0x0); + /* "Invalid command operation code" */ + done(cmd); break; } } diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h index 4622e643ffd3..a18f2ac1d4a1 100644 --- a/drivers/scsi/libata.h +++ b/drivers/scsi/libata.h @@ -86,14 +86,4 @@ extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args, unsigned int (*actor) (struct ata_scsi_args *args, u8 *rbuf, unsigned int buflen)); -static inline void ata_bad_scsiop(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x20, 0x00); -} - -static inline void ata_bad_cdb(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)) -{ - ata_scsi_badcmd(cmd, done, 0x24, 0x00); -} - #endif /* __LIBATA_H__ */ From 1fcce839a541ffcd50da99a1bfdfea594be0e3d3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Oct 2005 09:31:33 -0400 Subject: [PATCH 099/101] [libata sata_sil24] nit pickings This patch removes unused NR_PORTS macro and adds termination entry to sil24_pci_tbl. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 693330bdc821..dffa13c84639 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -43,8 +43,6 @@ #define DRV_NAME "sata_sil24" #define DRV_VERSION "0.22" /* Silicon Image's preview driver was 0.10 */ -#define NR_PORTS 4 - /* * Port request block (PRB) 32 bytes */ @@ -244,6 +242,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { } /* terminate list */ }; static struct pci_driver sil24_pci_driver = { From 042c21fd2c3aa553907020131caa553a9da24589 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sun, 9 Oct 2005 09:35:46 -0400 Subject: [PATCH 100/101] [libata sata_sil24] add support for 3131/3531 This patch adds support for sil_3131 and sil_3531. Both are identical to 3124 except that they have only one port. Bits 30 and 31 of ata_port_info->host_flags is used to encode available port numbers. Version number is bumped to 0.22. Edward Falk supplied all the necessary information and preliminary patch. Signed-off-by: Tejun Heo --- drivers/scsi/sata_sil24.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-) diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index dffa13c84639..19857814d69f 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -196,6 +196,7 @@ enum { /* board id */ BID_SIL3124 = 0, BID_SIL3132 = 1, + BID_SIL3131 = 2, IRQ_STAT_4PORTS = 0xf, }; @@ -242,6 +243,8 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) static struct pci_device_id sil24_pci_tbl[] = { { 0x1095, 0x3124, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3124 }, { 0x1095, 0x3132, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3132 }, + { 0x1095, 0x3131, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, + { 0x1095, 0x3531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BID_SIL3131 }, { } /* terminate list */ }; @@ -300,13 +303,20 @@ static struct ata_port_operations sil24_ops = { .host_stop = sil24_host_stop, }; +/* + * Use bits 30-31 of host_flags to encode available port numbers. + * Current maxium is 4. + */ +#define SIL24_NPORTS2FLAG(nports) ((((unsigned)(nports) - 1) & 0x3) << 30) +#define SIL24_FLAG2NPORTS(flag) ((((flag) >> 30) & 0x3) + 1) + static struct ata_port_info sil24_port_info[] = { /* sil_3124 */ { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(4), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -317,7 +327,18 @@ static struct ata_port_info sil24_port_info[] = { .sht = &sil24_sht, .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - ATA_FLAG_PIO_DMA, + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(2), + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = 0x3f, /* udma0-5 */ + .port_ops = &sil24_ops, + }, + /* sil_3131/sil_3531 */ + { + .sht = &sil24_sht, + .host_flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | + ATA_FLAG_PIO_DMA | SIL24_NPORTS2FLAG(1), .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = 0x3f, /* udma0-5 */ @@ -665,6 +686,7 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; unsigned int board_id = (unsigned int)ent->driver_data; + struct ata_port_info *pinfo = &sil24_port_info[board_id]; struct ata_probe_ent *probe_ent = NULL; struct sil24_host_priv *hpriv = NULL; void *host_base = NULL, *port_base = NULL; @@ -705,12 +727,12 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - probe_ent->sht = sil24_port_info[board_id].sht; - probe_ent->host_flags = sil24_port_info[board_id].host_flags; - probe_ent->pio_mask = sil24_port_info[board_id].pio_mask; - probe_ent->udma_mask = sil24_port_info[board_id].udma_mask; - probe_ent->port_ops = sil24_port_info[board_id].port_ops; - probe_ent->n_ports = (board_id == BID_SIL3124) ? 4 : 2; + probe_ent->sht = pinfo->sht; + probe_ent->host_flags = pinfo->host_flags; + probe_ent->pio_mask = pinfo->pio_mask; + probe_ent->udma_mask = pinfo->udma_mask; + probe_ent->port_ops = pinfo->port_ops; + probe_ent->n_ports = SIL24_FLAG2NPORTS(pinfo->host_flags); probe_ent->irq = pdev->irq; probe_ent->irq_flags = SA_SHIRQ; From e710245bb0f980adfb1dfe850e43761a8117c6be Mon Sep 17 00:00:00 2001 From: Andy Currid Date: Fri, 7 Oct 2005 08:53:39 -0700 Subject: [PATCH 101/101] [PATCH] Fix sata_nv handling of NVIDIA MCP51/55 Patch to fix sata_nv handling of NVIDIA MCP51/55 Signed-off-by: Andy Currid Signed-off-by: Jeff Garzik --- drivers/scsi/sata_nv.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c index 749ff92d8c63..9fa2535dd937 100644 --- a/drivers/scsi/sata_nv.c +++ b/drivers/scsi/sata_nv.c @@ -29,6 +29,8 @@ * NV-specific details such as register offsets, SATA phy location, * hotplug info, etc. * + * 0.09 + * - Fixed bug introduced by 0.08's MCP51 and MCP55 support. * * 0.08 * - Added support for MCP51 and MCP55. @@ -132,9 +134,7 @@ enum nv_host_type GENERIC, NFORCE2, NFORCE3, - CK804, - MCP51, - MCP55 + CK804 }; static struct pci_device_id nv_pci_tbl[] = { @@ -153,13 +153,13 @@ static struct pci_device_id nv_pci_tbl[] = { { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP51 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2, - PCI_ANY_ID, PCI_ANY_ID, 0, 0, MCP55 }, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, GENERIC }, { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },