From c1c1a3d012fe5e82a9a025fb4b5a4f8ee67a53f6 Mon Sep 17 00:00:00 2001 From: Nikolaus Schulz Date: Wed, 22 Feb 2012 23:18:44 +0100 Subject: [PATCH] hwmon: (f75375s) Fix register write order when setting fans to full speed By hwmon sysfs interface convention, setting pwm_enable to zero sets a fan to full speed. In the f75375s driver, this need be done by enabling manual fan control, plus duty mode for the F875387 chip, and then setting the maximum duty cycle. Fix a bug where the two necessary register writes were swapped, effectively discarding the setting to full-speed. Signed-off-by: Nikolaus Schulz Cc: Riku Voipio Signed-off-by: Guenter Roeck --- drivers/hwmon/f75375s.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/f75375s.c b/drivers/hwmon/f75375s.c index f609b5727ba9..6bab2001ef3b 100644 --- a/drivers/hwmon/f75375s.c +++ b/drivers/hwmon/f75375s.c @@ -340,8 +340,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); break; case 1: /* PWM */ fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); @@ -361,8 +359,6 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) case 0: /* full speed */ fanmode |= (3 << FAN_CTRL_MODE(nr)); data->pwm[nr] = 255; - f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), - data->pwm[nr]); break; case 1: /* PWM */ fanmode |= (3 << FAN_CTRL_MODE(nr)); @@ -377,6 +373,9 @@ static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); data->pwm_enable[nr] = val; + if (val == 0) + f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), + data->pwm[nr]); return 0; }