From bee1b848877b9e4512bdda480f73cda12b593e2f Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sun, 3 Mar 2013 12:45:26 +0100 Subject: [PATCH] brcmfmac: increase required skbuff headroom for firmware signalling In preparation of firmware signalling feature additional headroom is needed to accommodate signalling protocol data between host and firmware. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- .../net/wireless/brcm80211/brcmfmac/dhd_cdc.c | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c index a2354d951dd7..81e1be7051ca 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_cdc.c @@ -71,13 +71,26 @@ struct brcmf_proto_cdc_dcmd { ((hdr)->flags2 = (((hdr)->flags2 & ~BDC_FLAG2_IF_MASK) | \ ((idx) << BDC_FLAG2_IF_SHIFT))) +/** + * struct brcmf_proto_bdc_header - BDC header format + * + * @flags: flags contain protocol and checksum info. + * @priority: 802.1d priority and USB flow control info (bit 4:7). + * @flags2: additional flags containing dongle interface index. + * @data_offset: start of packet data. header is following by firmware signals. + */ struct brcmf_proto_bdc_header { u8 flags; - u8 priority; /* 802.1d Priority, 4:7 flow control info for usb */ + u8 priority; u8 flags2; u8 data_offset; }; +/* + * maximum length of firmware signal data between + * the BDC header and packet data in the tx path. + */ +#define BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES 12 #define RETRIES 2 /* # of retries to retrieve matching dcmd response */ #define BUS_HEADER_LEN (16+64) /* Must be atleast SDPCM_RESERVE @@ -350,7 +363,7 @@ int brcmf_proto_attach(struct brcmf_pub *drvr) } drvr->prot = cdc; - drvr->hdrlen += BDC_HEADER_LEN; + drvr->hdrlen += BDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; drvr->bus_if->maxctl = BRCMF_DCMD_MAXLEN + sizeof(struct brcmf_proto_cdc_dcmd) + ROUND_UP_MARGIN; return 0;