ARM: shmobile: lager: add gpio/fixed regulator for SDHI
Fixed regulator is used for SDHI0/2 Vcc. We should use da9063 driver for Vccq, but, it doesn't have regulator support at this point. This patch uses gpio-regulator for it as quick-hack. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
This commit is contained in:
parent
c653033bae
commit
be0647d556
|
@ -31,7 +31,9 @@
|
|||
#include <linux/platform_data/rcar-du.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/phy.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/fixed.h>
|
||||
#include <linux/regulator/gpio-regulator.h>
|
||||
#include <linux/regulator/machine.h>
|
||||
#include <linux/sh_eth.h>
|
||||
#include <mach/common.h>
|
||||
|
@ -146,6 +148,71 @@ static struct regulator_consumer_supply fixed3v3_power_consumers[] =
|
|||
REGULATOR_SUPPLY("vmmc", "sh_mmcif.1"),
|
||||
};
|
||||
|
||||
/*
|
||||
* SDHI regulator macro
|
||||
*
|
||||
** FIXME**
|
||||
* Lager board vqmmc is provided via DA9063 PMIC chip,
|
||||
* and we should use ${LINK}/drivers/mfd/da9063-* driver for it.
|
||||
* but, it doesn't have regulator support at this point.
|
||||
* It uses gpio-regulator for vqmmc as quick-hack.
|
||||
*/
|
||||
#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
|
||||
static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
|
||||
REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
|
||||
\
|
||||
static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
|
||||
.constraints = { \
|
||||
.valid_ops_mask = REGULATOR_CHANGE_STATUS, \
|
||||
}, \
|
||||
.consumer_supplies = &vcc_sdhi##idx##_consumer, \
|
||||
.num_consumer_supplies = 1, \
|
||||
}; \
|
||||
\
|
||||
static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
|
||||
.supply_name = "SDHI" #idx "Vcc", \
|
||||
.microvolts = 3300000, \
|
||||
.gpio = vdd_pin, \
|
||||
.enable_high = 1, \
|
||||
.init_data = &vcc_sdhi##idx##_init_data, \
|
||||
}; \
|
||||
\
|
||||
static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
|
||||
REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
|
||||
\
|
||||
static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
|
||||
.constraints = { \
|
||||
.input_uV = 3300000, \
|
||||
.min_uV = 1800000, \
|
||||
.max_uV = 3300000, \
|
||||
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
|
||||
REGULATOR_CHANGE_STATUS, \
|
||||
}, \
|
||||
.consumer_supplies = &vccq_sdhi##idx##_consumer, \
|
||||
.num_consumer_supplies = 1, \
|
||||
}; \
|
||||
\
|
||||
static struct gpio vccq_sdhi##idx##_gpio = \
|
||||
{ vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
|
||||
\
|
||||
static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
|
||||
{ .value = 1800000, .gpios = 0 }, \
|
||||
{ .value = 3300000, .gpios = 1 }, \
|
||||
}; \
|
||||
\
|
||||
static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
|
||||
.supply_name = "vqmmc", \
|
||||
.gpios = &vccq_sdhi##idx##_gpio, \
|
||||
.nr_gpios = 1, \
|
||||
.states = vccq_sdhi##idx##_states, \
|
||||
.nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
|
||||
.type = REGULATOR_VOLTAGE, \
|
||||
.init_data = &vccq_sdhi##idx##_init_data, \
|
||||
};
|
||||
|
||||
SDHI_REGULATOR(0, RCAR_GP_PIN(5, 24), RCAR_GP_PIN(5, 29));
|
||||
SDHI_REGULATOR(2, RCAR_GP_PIN(5, 25), RCAR_GP_PIN(5, 30));
|
||||
|
||||
/* MMCIF */
|
||||
static const struct sh_mmcif_plat_data mmcif1_pdata __initconst = {
|
||||
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
|
||||
|
@ -256,6 +323,9 @@ static const struct pinctrl_map lager_pinctrl_map[] = {
|
|||
|
||||
static void __init lager_add_standard_devices(void)
|
||||
{
|
||||
int fixed_regulator_idx = 0;
|
||||
int gpio_regulator_idx = 0;
|
||||
|
||||
r8a7790_clock_init();
|
||||
|
||||
pinctrl_register_mappings(lager_pinctrl_map,
|
||||
|
@ -269,7 +339,8 @@ static void __init lager_add_standard_devices(void)
|
|||
platform_device_register_data(&platform_bus, "gpio-keys", -1,
|
||||
&lager_keys_pdata,
|
||||
sizeof(lager_keys_pdata));
|
||||
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
|
||||
regulator_register_always_on(fixed_regulator_idx++,
|
||||
"fixed-3.3V", fixed3v3_power_consumers,
|
||||
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
|
||||
platform_device_register_resndata(&platform_bus, "sh_mmcif", 1,
|
||||
mmcif1_resources, ARRAY_SIZE(mmcif1_resources),
|
||||
|
@ -287,6 +358,16 @@ static void __init lager_add_standard_devices(void)
|
|||
ARRAY_SIZE(qspi_resources),
|
||||
&qspi_pdata, sizeof(qspi_pdata));
|
||||
spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
|
||||
|
||||
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
|
||||
&vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
|
||||
platform_device_register_data(&platform_bus, "reg-fixed-voltage", fixed_regulator_idx++,
|
||||
&vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
|
||||
|
||||
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
|
||||
&vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
|
||||
platform_device_register_data(&platform_bus, "gpio-regulator", gpio_regulator_idx++,
|
||||
&vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
Loading…
Reference in New Issue