Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 into devel
This commit is contained in:
Russell King
Russell King
commit
bcbfe664e7
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
|
|
@ -71,6 +71,14 @@ config PXA_SHARPSL
|
|||
SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
|
||||
handheld computer.
|
||||
|
||||
config CORGI_SSP_DEPRECATED
|
||||
bool
|
||||
select PXA_SSP
|
||||
help
|
||||
This option will include corgi_ssp.c and corgi_lcd.c
|
||||
that corgi_ts.c and other legacy drivers (corgi_bl.c
|
||||
and sharpsl_pm.c) may depend on.
|
||||
|
||||
config MACH_POODLE
|
||||
bool "Enable Sharp SL-5600 (Poodle) Support"
|
||||
depends on PXA_SHARPSL
|
||||
|
|
|
|||
|
|
@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o
|
|||
obj-$(CONFIG_MACH_COLIBRI) += colibri.o
|
||||
obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o
|
||||
obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o
|
||||
obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o
|
||||
obj-$(CONFIG_MACH_POODLE) += poodle.o
|
||||
obj-$(CONFIG_MACH_PCM027) += pcm027.o
|
||||
obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,289 @@
|
|||
/*
|
||||
* linux/arch/arm/mach-pxa/corgi_lcd.c
|
||||
*
|
||||
* Corgi/Spitz LCD Specific Code
|
||||
*
|
||||
* Copyright (C) 2005 Richard Purdie
|
||||
*
|
||||
* Connectivity:
|
||||
* Corgi - LCD to ATI Imageon w100 (Wallaby)
|
||||
* Spitz - LCD to PXA Framebuffer
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/delay.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/string.h>
|
||||
#include <mach/corgi.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <mach/pxa-regs.h>
|
||||
#include <mach/sharpsl.h>
|
||||
#include <mach/spitz.h>
|
||||
#include <asm/hardware/scoop.h>
|
||||
#include <asm/mach/sharpsl_param.h>
|
||||
#include "generic.h"
|
||||
|
||||
/* Register Addresses */
|
||||
#define RESCTL_ADRS 0x00
|
||||
#define PHACTRL_ADRS 0x01
|
||||
#define DUTYCTRL_ADRS 0x02
|
||||
#define POWERREG0_ADRS 0x03
|
||||
#define POWERREG1_ADRS 0x04
|
||||
#define GPOR3_ADRS 0x05
|
||||
#define PICTRL_ADRS 0x06
|
||||
#define POLCTRL_ADRS 0x07
|
||||
|
||||
/* Register Bit Definitions */
|
||||
#define RESCTL_QVGA 0x01
|
||||
#define RESCTL_VGA 0x00
|
||||
|
||||
#define POWER1_VW_ON 0x01 /* VW Supply FET ON */
|
||||
#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */
|
||||
#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */
|
||||
|
||||
#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */
|
||||
#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */
|
||||
#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */
|
||||
|
||||
#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */
|
||||
#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */
|
||||
#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */
|
||||
#define POWER0_COM_ON 0x08 /* COM Power Supply ON */
|
||||
#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */
|
||||
|
||||
#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */
|
||||
#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */
|
||||
#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */
|
||||
|
||||
#define PICTRL_INIT_STATE 0x01
|
||||
#define PICTRL_INIOFF 0x02
|
||||
#define PICTRL_POWER_DOWN 0x04
|
||||
#define PICTRL_COM_SIGNAL_OFF 0x08
|
||||
#define PICTRL_DAC_SIGNAL_OFF 0x10
|
||||
|
||||
#define POLCTRL_SYNC_POL_FALL 0x01
|
||||
#define POLCTRL_EN_POL_FALL 0x02
|
||||
#define POLCTRL_DATA_POL_FALL 0x04
|
||||
#define POLCTRL_SYNC_ACT_H 0x08
|
||||
#define POLCTRL_EN_ACT_L 0x10
|
||||
|
||||
#define POLCTRL_SYNC_POL_RISE 0x00
|
||||
#define POLCTRL_EN_POL_RISE 0x00
|
||||
#define POLCTRL_DATA_POL_RISE 0x00
|
||||
#define POLCTRL_SYNC_ACT_L 0x00
|
||||
#define POLCTRL_EN_ACT_H 0x00
|
||||
|
||||
#define PHACTRL_PHASE_MANUAL 0x01
|
||||
#define DEFAULT_PHAD_QVGA (9)
|
||||
#define DEFAULT_COMADJ (125)
|
||||
|
||||
/*
|
||||
* This is only a psuedo I2C interface. We can't use the standard kernel
|
||||
* routines as the interface is write only. We just assume the data is acked...
|
||||
*/
|
||||
static void lcdtg_ssp_i2c_send(u8 data)
|
||||
{
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
|
||||
udelay(10);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_bit(u8 data)
|
||||
{
|
||||
lcdtg_ssp_i2c_send(data);
|
||||
lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
|
||||
lcdtg_ssp_i2c_send(data);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_start(u8 base)
|
||||
{
|
||||
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
||||
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
|
||||
lcdtg_ssp_i2c_send(base);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_stop(u8 base)
|
||||
{
|
||||
lcdtg_ssp_i2c_send(base);
|
||||
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
|
||||
lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_send_byte(u8 base, u8 data)
|
||||
{
|
||||
int i;
|
||||
for (i = 0; i < 8; i++) {
|
||||
if (data & 0x80)
|
||||
lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
|
||||
else
|
||||
lcdtg_i2c_send_bit(base);
|
||||
data <<= 1;
|
||||
}
|
||||
}
|
||||
|
||||
static void lcdtg_i2c_wait_ack(u8 base)
|
||||
{
|
||||
lcdtg_i2c_send_bit(base);
|
||||
}
|
||||
|
||||
static void lcdtg_set_common_voltage(u8 base_data, u8 data)
|
||||
{
|
||||
/* Set Common Voltage to M62332FP via I2C */
|
||||
lcdtg_i2c_send_start(base_data);
|
||||
lcdtg_i2c_send_byte(base_data, 0x9c);
|
||||
lcdtg_i2c_wait_ack(base_data);
|
||||
lcdtg_i2c_send_byte(base_data, 0x00);
|
||||
lcdtg_i2c_wait_ack(base_data);
|
||||
lcdtg_i2c_send_byte(base_data, data);
|
||||
lcdtg_i2c_wait_ack(base_data);
|
||||
lcdtg_i2c_send_stop(base_data);
|
||||
}
|
||||
|
||||
/* Set Phase Adjust */
|
||||
static void lcdtg_set_phadadj(int mode)
|
||||
{
|
||||
int adj;
|
||||
switch(mode) {
|
||||
case 480:
|
||||
case 640:
|
||||
/* Setting for VGA */
|
||||
adj = sharpsl_param.phadadj;
|
||||
if (adj < 0) {
|
||||
adj = PHACTRL_PHASE_MANUAL;
|
||||
} else {
|
||||
adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
|
||||
}
|
||||
break;
|
||||
case 240:
|
||||
case 320:
|
||||
default:
|
||||
/* Setting for QVGA */
|
||||
adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
|
||||
break;
|
||||
}
|
||||
|
||||
corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
|
||||
}
|
||||
|
||||
static int lcd_inited;
|
||||
|
||||
void corgi_lcdtg_hw_init(int mode)
|
||||
{
|
||||
if (!lcd_inited) {
|
||||
int comadj;
|
||||
|
||||
/* Initialize Internal Logic & Port */
|
||||
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
|
||||
| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
|
||||
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
|
||||
| POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
||||
|
||||
/* VDD(+8V), SVSS(-4V) ON */
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
||||
mdelay(3);
|
||||
|
||||
/* DAC ON */
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
|
||||
| POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
/* INIB = H, INI = L */
|
||||
/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
|
||||
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
|
||||
|
||||
/* Set Common Voltage */
|
||||
comadj = sharpsl_param.comadj;
|
||||
if (comadj < 0)
|
||||
comadj = DEFAULT_COMADJ;
|
||||
lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
|
||||
|
||||
/* VCC5 ON, DAC ON */
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
|
||||
POWER0_COM_OFF | POWER0_VCC5_ON);
|
||||
|
||||
/* GVSS(-8V) ON, VDD ON */
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
||||
mdelay(2);
|
||||
|
||||
/* COM SIGNAL ON (PICTL[3] = L) */
|
||||
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
|
||||
|
||||
/* COM ON, DAC ON, VCC5_ON */
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
|
||||
| POWER0_COM_ON | POWER0_VCC5_ON);
|
||||
|
||||
/* VW ON, GVSS ON, VDD ON */
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
|
||||
|
||||
/* Signals output enable */
|
||||
corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
|
||||
|
||||
/* Set Phase Adjust */
|
||||
lcdtg_set_phadadj(mode);
|
||||
|
||||
/* Initialize for Input Signals from ATI */
|
||||
corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
|
||||
| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
|
||||
udelay(1000);
|
||||
|
||||
lcd_inited=1;
|
||||
} else {
|
||||
lcdtg_set_phadadj(mode);
|
||||
}
|
||||
|
||||
switch(mode) {
|
||||
case 480:
|
||||
case 640:
|
||||
/* Set Lcd Resolution (VGA) */
|
||||
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
|
||||
break;
|
||||
case 240:
|
||||
case 320:
|
||||
default:
|
||||
/* Set Lcd Resolution (QVGA) */
|
||||
corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
void corgi_lcdtg_suspend(void)
|
||||
{
|
||||
/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
|
||||
mdelay(34);
|
||||
|
||||
/* (1)VW OFF */
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
|
||||
|
||||
/* (2)COM OFF */
|
||||
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
|
||||
|
||||
/* (3)Set Common Voltage Bias 0V */
|
||||
lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
|
||||
|
||||
/* (4)GVSS OFF */
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
|
||||
|
||||
/* (5)VCC5 OFF */
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
/* (6)Set PDWN, INIOFF, DACOFF */
|
||||
corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
|
||||
PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
|
||||
|
||||
/* (7)DAC OFF */
|
||||
corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
|
||||
|
||||
/* (8)VDD OFF */
|
||||
corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
|
||||
|
||||
lcd_inited = 0;
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,276 @@
|
|||
/*
|
||||
* SSP control code for Sharp Corgi devices
|
||||
*
|
||||
* Copyright (c) 2004-2005 Richard Purdie
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/sched.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
||||
#include <mach/ssp.h>
|
||||
#include <mach/pxa-regs.h>
|
||||
#include <mach/pxa2xx-gpio.h>
|
||||
#include <mach/regs-ssp.h>
|
||||
#include "sharpsl.h"
|
||||
|
||||
static DEFINE_SPINLOCK(corgi_ssp_lock);
|
||||
static struct ssp_dev corgi_ssp_dev;
|
||||
static struct ssp_state corgi_ssp_state;
|
||||
static struct corgissp_machinfo *ssp_machinfo;
|
||||
|
||||
/*
|
||||
* There are three devices connected to the SSP interface:
|
||||
* 1. A touchscreen controller (TI ADS7846 compatible)
|
||||
* 2. An LCD controller (with some Backlight functionality)
|
||||
* 3. A battery monitoring IC (Maxim MAX1111)
|
||||
*
|
||||
* Each device uses a different speed/mode of communication.
|
||||
*
|
||||
* The touchscreen is very sensitive and the most frequently used
|
||||
* so the port is left configured for this.
|
||||
*
|
||||
* Devices are selected using Chip Selects on GPIOs.
|
||||
*/
|
||||
|
||||
/*
|
||||
* ADS7846 Routines
|
||||
*/
|
||||
unsigned long corgi_ssp_ads7846_putget(ulong data)
|
||||
{
|
||||
unsigned long flag;
|
||||
u32 ret = 0;
|
||||
|
||||
spin_lock_irqsave(&corgi_ssp_lock, flag);
|
||||
if (ssp_machinfo->cs_ads7846 >= 0)
|
||||
GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
|
||||
|
||||
ssp_write_word(&corgi_ssp_dev,data);
|
||||
ssp_read_word(&corgi_ssp_dev, &ret);
|
||||
|
||||
if (ssp_machinfo->cs_ads7846 >= 0)
|
||||
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
|
||||
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* NOTE: These functions should always be called in interrupt context
|
||||
* and use the _lock and _unlock functions. They are very time sensitive.
|
||||
*/
|
||||
void corgi_ssp_ads7846_lock(void)
|
||||
{
|
||||
spin_lock(&corgi_ssp_lock);
|
||||
if (ssp_machinfo->cs_ads7846 >= 0)
|
||||
GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
|
||||
}
|
||||
|
||||
void corgi_ssp_ads7846_unlock(void)
|
||||
{
|
||||
if (ssp_machinfo->cs_ads7846 >= 0)
|
||||
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
|
||||
spin_unlock(&corgi_ssp_lock);
|
||||
}
|
||||
|
||||
void corgi_ssp_ads7846_put(ulong data)
|
||||
{
|
||||
ssp_write_word(&corgi_ssp_dev,data);
|
||||
}
|
||||
|
||||
unsigned long corgi_ssp_ads7846_get(void)
|
||||
{
|
||||
u32 ret = 0;
|
||||
ssp_read_word(&corgi_ssp_dev, &ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
|
||||
EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
|
||||
EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
|
||||
EXPORT_SYMBOL(corgi_ssp_ads7846_put);
|
||||
EXPORT_SYMBOL(corgi_ssp_ads7846_get);
|
||||
|
||||
|
||||
/*
|
||||
* LCD/Backlight Routines
|
||||
*/
|
||||
unsigned long corgi_ssp_dac_put(ulong data)
|
||||
{
|
||||
unsigned long flag, sscr1 = SSCR1_SPH;
|
||||
u32 tmp;
|
||||
|
||||
spin_lock_irqsave(&corgi_ssp_lock, flag);
|
||||
|
||||
if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
|
||||
sscr1 = 0;
|
||||
|
||||
ssp_disable(&corgi_ssp_dev);
|
||||
ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
|
||||
ssp_enable(&corgi_ssp_dev);
|
||||
|
||||
if (ssp_machinfo->cs_lcdcon >= 0)
|
||||
GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
|
||||
ssp_write_word(&corgi_ssp_dev,data);
|
||||
/* Read null data back from device to prevent SSP overflow */
|
||||
ssp_read_word(&corgi_ssp_dev, &tmp);
|
||||
if (ssp_machinfo->cs_lcdcon >= 0)
|
||||
GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
|
||||
|
||||
ssp_disable(&corgi_ssp_dev);
|
||||
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
|
||||
ssp_enable(&corgi_ssp_dev);
|
||||
|
||||
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
|
||||
{
|
||||
corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
|
||||
}
|
||||
|
||||
void corgi_ssp_blduty_set(int duty)
|
||||
{
|
||||
corgi_ssp_lcdtg_send(0x02,duty);
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
|
||||
EXPORT_SYMBOL(corgi_ssp_blduty_set);
|
||||
|
||||
/*
|
||||
* Max1111 Routines
|
||||
*/
|
||||
int corgi_ssp_max1111_get(ulong data)
|
||||
{
|
||||
unsigned long flag;
|
||||
long voltage = 0, voltage1 = 0, voltage2 = 0;
|
||||
|
||||
spin_lock_irqsave(&corgi_ssp_lock, flag);
|
||||
if (ssp_machinfo->cs_max1111 >= 0)
|
||||
GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
|
||||
ssp_disable(&corgi_ssp_dev);
|
||||
ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
|
||||
ssp_enable(&corgi_ssp_dev);
|
||||
|
||||
udelay(1);
|
||||
|
||||
/* TB1/RB1 */
|
||||
ssp_write_word(&corgi_ssp_dev,data);
|
||||
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
|
||||
|
||||
/* TB12/RB2 */
|
||||
ssp_write_word(&corgi_ssp_dev,0);
|
||||
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
|
||||
|
||||
/* TB13/RB3*/
|
||||
ssp_write_word(&corgi_ssp_dev,0);
|
||||
ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
|
||||
|
||||
ssp_disable(&corgi_ssp_dev);
|
||||
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
|
||||
ssp_enable(&corgi_ssp_dev);
|
||||
if (ssp_machinfo->cs_max1111 >= 0)
|
||||
GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
|
||||
spin_unlock_irqrestore(&corgi_ssp_lock, flag);
|
||||
|
||||
if (voltage1 & 0xc0 || voltage2 & 0x3f)
|
||||
voltage = -1;
|
||||
else
|
||||
voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
|
||||
|
||||
return voltage;
|
||||
}
|
||||
|
||||
EXPORT_SYMBOL(corgi_ssp_max1111_get);
|
||||
|
||||
/*
|
||||
* Support Routines
|
||||
*/
|
||||
|
||||
void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
|
||||
{
|
||||
ssp_machinfo = machinfo;
|
||||
}
|
||||
|
||||
static int __init corgi_ssp_probe(struct platform_device *dev)
|
||||
{
|
||||
int ret;
|
||||
|
||||
/* Chip Select - Disable All */
|
||||
if (ssp_machinfo->cs_lcdcon >= 0)
|
||||
pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH);
|
||||
if (ssp_machinfo->cs_max1111 >= 0)
|
||||
pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
|
||||
if (ssp_machinfo->cs_ads7846 >= 0)
|
||||
pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
|
||||
|
||||
ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
|
||||
|
||||
if (ret)
|
||||
printk(KERN_ERR "Unable to register SSP handler!\n");
|
||||
else {
|
||||
ssp_disable(&corgi_ssp_dev);
|
||||
ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
|
||||
ssp_enable(&corgi_ssp_dev);
|
||||
}
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int corgi_ssp_remove(struct platform_device *dev)
|
||||
{
|
||||
ssp_exit(&corgi_ssp_dev);
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
|
||||
{
|
||||
ssp_flush(&corgi_ssp_dev);
|
||||
ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int corgi_ssp_resume(struct platform_device *dev)
|
||||
{
|
||||
if (ssp_machinfo->cs_lcdcon >= 0)
|
||||
GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
|
||||
if (ssp_machinfo->cs_max1111 >= 0)
|
||||
GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
|
||||
if (ssp_machinfo->cs_ads7846 >= 0)
|
||||
GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
|
||||
ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
|
||||
ssp_enable(&corgi_ssp_dev);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct platform_driver corgissp_driver = {
|
||||
.probe = corgi_ssp_probe,
|
||||
.remove = corgi_ssp_remove,
|
||||
.suspend = corgi_ssp_suspend,
|
||||
.resume = corgi_ssp_resume,
|
||||
.driver = {
|
||||
.name = "corgi-ssp",
|
||||
},
|
||||
};
|
||||
|
||||
int __init corgi_ssp_init(void)
|
||||
{
|
||||
return platform_driver_register(&corgissp_driver);
|
||||
}
|
||||
|
||||
arch_initcall(corgi_ssp_init);
|
||||
|
|
@ -113,6 +113,7 @@
|
|||
* Shared data structures
|
||||
*/
|
||||
extern struct platform_device corgiscoop_device;
|
||||
extern struct platform_device corgissp_device;
|
||||
|
||||
#endif /* __ASM_ARCH_CORGI_H */
|
||||
|
||||
|
|
|
|||
|
|
@ -187,4 +187,5 @@
|
|||
*/
|
||||
extern struct platform_device spitzscoop_device;
|
||||
extern struct platform_device spitzscoop2_device;
|
||||
extern struct platform_device spitzssp_device;
|
||||
extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
|
||||
|
|
|
|||
|
|
@ -116,20 +116,33 @@ struct battery_thresh spitz_battery_levels_noac[] = {
|
|||
{ 0, 0},
|
||||
};
|
||||
|
||||
/* MAX1111 Commands */
|
||||
#define MAXCTRL_PD0 1u << 0
|
||||
#define MAXCTRL_PD1 1u << 1
|
||||
#define MAXCTRL_SGL 1u << 2
|
||||
#define MAXCTRL_UNI 1u << 3
|
||||
#define MAXCTRL_SEL_SH 4
|
||||
#define MAXCTRL_STR 1u << 7
|
||||
|
||||
/*
|
||||
* Read MAX1111 ADC
|
||||
*/
|
||||
extern int max1111_read_channel(int);
|
||||
|
||||
int sharpsl_pm_pxa_read_max1111(int channel)
|
||||
{
|
||||
if (machine_is_tosa()) // Ugly, better move this function into another module
|
||||
return 0;
|
||||
|
||||
#ifdef CONFIG_CORGI_SSP_DEPRECATED
|
||||
return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
|
||||
| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
|
||||
#else
|
||||
extern int max1111_read_channel(int);
|
||||
|
||||
/* max1111 accepts channels from 0-3, however,
|
||||
* it is encoded from 0-7 here in the code.
|
||||
*/
|
||||
return max1111_read_channel(channel >> 1);
|
||||
#endif
|
||||
}
|
||||
|
||||
void sharpsl_pm_pxa_init(void)
|
||||
|
|
|
|||
|
|
@ -42,8 +42,9 @@ config TOUCHSCREEN_BITSY
|
|||
module will be called h3600_ts_input.
|
||||
|
||||
config TOUCHSCREEN_CORGI
|
||||
tristate "SharpSL (Corgi and Spitz series) touchscreen driver"
|
||||
tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)"
|
||||
depends on PXA_SHARPSL
|
||||
select CORGI_SSP_DEPRECATED
|
||||
default y
|
||||
help
|
||||
Say Y here to enable the driver for the touchscreen on the
|
||||
|
|
@ -54,6 +55,9 @@ config TOUCHSCREEN_CORGI
|
|||
To compile this driver as a module, choose M here: the
|
||||
module will be called corgi_ts.
|
||||
|
||||
NOTE: this driver is deprecated, try enable SPI and generic
|
||||
ADS7846-based touchscreen driver.
|
||||
|
||||
config TOUCHSCREEN_FUJITSU
|
||||
tristate "Fujitsu serial touchscreen"
|
||||
select SERIO
|
||||
|
|
|
|||
|
|
@ -115,14 +115,18 @@ config BACKLIGHT_ATMEL_PWM
|
|||
called atmel-pwm-bl.
|
||||
|
||||
config BACKLIGHT_CORGI
|
||||
tristate "Generic (aka Sharp Corgi) Backlight Driver"
|
||||
tristate "Generic (aka Sharp Corgi) Backlight Driver (DEPRECATED)"
|
||||
depends on BACKLIGHT_CLASS_DEVICE
|
||||
select CORGI_SSP_DEPRECATED
|
||||
default n
|
||||
help
|
||||
Say y to enable the generic platform backlight driver previously
|
||||
known as the Corgi backlight driver. If you have a Sharp Zaurus
|
||||
SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n.
|
||||
|
||||
Note: this driver is marked as deprecated, try enable SPI and
|
||||
use the new corgi_lcd driver with integrated backlight control
|
||||
|
||||
config BACKLIGHT_LOCOMO
|
||||
tristate "Sharp LOCOMO LCD/Backlight Driver"
|
||||
depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO
|
||||
|
|
|
|||
Loading…
Reference in New Issue