rtc: pcf2127: cleanup register and bit defines
Cleanup of defines to follow kernel coding style and increase code readability by using same register and bit define style. Change PCF2127_REG_RAM_{addr_MSB,wrt_cmd,rd_cmd} to upper case as kernel coding guide section 12 'Macros, Enums and RTL' states "Names of macros defining constants and labels in enums are capitalized". Improve readability of RAM register comment by making whole sentences. Remove parentheses from register defines as they are only used for expressions and not constants. As there are no clear style for name of registers and bits in the kernel drivers, I suggest the following for at least this driver, but hopefully also other RTC drivers. Register name should follow this convention: [chip]_REG_[reg name] 0xXX Bit name should follow this convention, so it clearly states which chip register it's part of: [chip]_BIT_[reg name]_[bit name] BIT(X) Additionally I suggest bit defines are always placed right below its corresponding register define and using an extra tab indentation for the BIT(X) part. This will visually make it easy to see that bit defines are part of the complete register definition. Rename PCF2127_OSF to PCF2127_BIT_SC_OSF and move it right below PCF2127_REG_SC. This will improve readability of bit checks as it's easy to verify that it uses the correct register. Move end of line comments above register defines as it's more like a heading for 1 register define and up to 8 bit defines or a collection of registers that are close related like timestamp split across 6 registers. Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com> Link: https://lore.kernel.org/r/20190822131936.18772-2-bruno.thomsen@gmail.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This commit is contained in:
parent
e788771cac
commit
bbfe3a7a1d
|
@ -19,26 +19,32 @@
|
|||
#include <linux/of.h>
|
||||
#include <linux/regmap.h>
|
||||
|
||||
#define PCF2127_REG_CTRL1 (0x00) /* Control Register 1 */
|
||||
#define PCF2127_REG_CTRL2 (0x01) /* Control Register 2 */
|
||||
/* Control register 1 */
|
||||
#define PCF2127_REG_CTRL1 0x00
|
||||
/* Control register 2 */
|
||||
#define PCF2127_REG_CTRL2 0x01
|
||||
/* Control register 3 */
|
||||
#define PCF2127_REG_CTRL3 0x02
|
||||
#define PCF2127_BIT_CTRL3_BLF BIT(2)
|
||||
/* Time and date registers */
|
||||
#define PCF2127_REG_SC 0x03
|
||||
#define PCF2127_BIT_SC_OSF BIT(7)
|
||||
#define PCF2127_REG_MN 0x04
|
||||
#define PCF2127_REG_HR 0x05
|
||||
#define PCF2127_REG_DM 0x06
|
||||
#define PCF2127_REG_DW 0x07
|
||||
#define PCF2127_REG_MO 0x08
|
||||
#define PCF2127_REG_YR 0x09
|
||||
/*
|
||||
* RAM registers
|
||||
* PCF2127 has 512 bytes general-purpose static RAM (SRAM) that is
|
||||
* battery backed and can survive a power outage.
|
||||
* PCF2129 doesn't have this feature.
|
||||
*/
|
||||
#define PCF2127_REG_RAM_ADDR_MSB 0x1A
|
||||
#define PCF2127_REG_RAM_WRT_CMD 0x1C
|
||||
#define PCF2127_REG_RAM_RD_CMD 0x1D
|
||||
|
||||
#define PCF2127_REG_CTRL3 (0x02) /* Control Register 3 */
|
||||
#define PCF2127_REG_CTRL3_BLF BIT(2)
|
||||
|
||||
#define PCF2127_REG_SC (0x03) /* datetime */
|
||||
#define PCF2127_REG_MN (0x04)
|
||||
#define PCF2127_REG_HR (0x05)
|
||||
#define PCF2127_REG_DM (0x06)
|
||||
#define PCF2127_REG_DW (0x07)
|
||||
#define PCF2127_REG_MO (0x08)
|
||||
#define PCF2127_REG_YR (0x09)
|
||||
|
||||
/* the pcf2127 has 512 bytes nvmem, pcf2129 doesn't */
|
||||
#define PCF2127_REG_RAM_addr_MSB 0x1a
|
||||
#define PCF2127_REG_RAM_wrt_cmd 0x1c
|
||||
#define PCF2127_REG_RAM_rd_cmd 0x1d
|
||||
|
||||
#define PCF2127_OSF BIT(7) /* Oscillator Fail flag */
|
||||
|
||||
struct pcf2127 {
|
||||
struct rtc_device *rtc;
|
||||
|
@ -73,11 +79,12 @@ static int pcf2127_rtc_read_time(struct device *dev, struct rtc_time *tm)
|
|||
return ret;
|
||||
}
|
||||
|
||||
if (buf[PCF2127_REG_CTRL3] & PCF2127_REG_CTRL3_BLF)
|
||||
if (buf[PCF2127_REG_CTRL3] & PCF2127_BIT_CTRL3_BLF)
|
||||
dev_info(dev,
|
||||
"low voltage detected, check/replace RTC battery.\n");
|
||||
|
||||
if (buf[PCF2127_REG_SC] & PCF2127_OSF) {
|
||||
/* Clock integrity is not guaranteed when OSF flag is set. */
|
||||
if (buf[PCF2127_REG_SC] & PCF2127_BIT_SC_OSF) {
|
||||
/*
|
||||
* no need clear the flag here,
|
||||
* it will be cleared once the new date is saved
|
||||
|
@ -166,7 +173,7 @@ static int pcf2127_rtc_ioctl(struct device *dev,
|
|||
if (ret)
|
||||
return ret;
|
||||
|
||||
touser = touser & PCF2127_REG_CTRL3_BLF ? 1 : 0;
|
||||
touser = touser & PCF2127_BIT_CTRL3_BLF ? 1 : 0;
|
||||
|
||||
if (copy_to_user((void __user *)arg, &touser, sizeof(int)))
|
||||
return -EFAULT;
|
||||
|
@ -192,12 +199,12 @@ static int pcf2127_nvmem_read(void *priv, unsigned int offset,
|
|||
int ret;
|
||||
unsigned char offsetbuf[] = { offset >> 8, offset };
|
||||
|
||||
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_addr_MSB,
|
||||
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB,
|
||||
offsetbuf, 2);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_rd_cmd,
|
||||
ret = regmap_bulk_read(pcf2127->regmap, PCF2127_REG_RAM_RD_CMD,
|
||||
val, bytes);
|
||||
|
||||
return ret ?: bytes;
|
||||
|
@ -210,12 +217,12 @@ static int pcf2127_nvmem_write(void *priv, unsigned int offset,
|
|||
int ret;
|
||||
unsigned char offsetbuf[] = { offset >> 8, offset };
|
||||
|
||||
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_addr_MSB,
|
||||
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_ADDR_MSB,
|
||||
offsetbuf, 2);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_wrt_cmd,
|
||||
ret = regmap_bulk_write(pcf2127->regmap, PCF2127_REG_RAM_WRT_CMD,
|
||||
val, bytes);
|
||||
|
||||
return ret ?: bytes;
|
||||
|
|
Loading…
Reference in New Issue